HLH15BB/15HL25S/HLE20BB/20AL25S/HLH19BB/HLH19W
LCD TV
USER MANUAL
Please read this manual carefully
before using this TV set and keep it
for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
Read all of the instructions before using this appliance. When using this
appliance, always exercise basic safety precautions, including the following:
1)Save these Instructions ---the safety and operating instructions should be
retained for future reference.
2)All warning on the appliance and in the operating instructions should be followed.
3)Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use only dry cloth for cleaning.
4)Attachments ---do not use attachments not recommended by the manufacturer
as they may cause hazards.
5)Water and moisture -- do not place this product near water, for example, near a
bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a
swimming pool.
6)Accessories ---do not place this unit on an unstable cart, stand, tripod, bracket,
or table. Use only with a cart, stand, tripod, bracket, or table recommend by the
manufacture, or sold with the unit.
7)Ventilation ---Slots and openings in the cabinets and the back or bottom are
provided for ventilation. These openings must not be blocked. In a built in
installation such a bookcase or rack do not install product unless proper ventilation
is provided.
8)Power Source ---this LCD TV should be operated only from the type of
power source indicated on the rating label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power company.
9)Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet. To prevent electric shock, ensure
the grounding pin on the AC cord power plug is securely connected.
10)Power cord protection ---Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords or plugs, convenience receptacle, and the point where
they exit from the appliance.
11)Lighting precaution ---for added protection for this product during a lighting
storm or when it is left unattended for long period of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent damage to the
product due to lighting and power line surges.
12)Never push objects of any kind into this product through openings as they may
touch dangerous voltage point or short out parts that could result in a fire or electric
shock. Avoid spilling liquid of any kind on the product.
13)Servicing ---do not attempt to service the product by yourself, as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to authorized service personnel.
14)Unplug this unit from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power supply cord or plug is damaged or frayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
b.If liquid has been spilled, or objects have been fallen into the unit.
c.If the unit has been exposed to rain or water.
d.If the unit does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions, as
improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the unit to its normal
operation.
e.If the unit has been dropped or damaged in any way.
f.When the unit exhibits a distinct change in performance; this indicates a need
for service.
15)Heat --- The product should be situated away heat source such as radiators, heat
registers, stoves, or other products (Including amplifiers) that product heat.
16)Overloading ---Do not overload wall outlets and extension cord as this can result
in a risk of fire or electric shock.
SAVE THESE INSTRUCTIONS
Thank you for using ourHaier product. This easy-to-use manualwill guide youin
getting the bestuse of yourproduct. Remember torecord the modeland serial
number. They are onlabel in backof the unit.
Model number
serial number
Date of purchase
Staple your receiptto your manual. You will need itto obtain warrantyservice.
Download from Www.Somanuals.com. All Manuals Search And Download.
To users:
Thank you for purchasing our LCD-TV.
Before connecting the LCD-TV and turning on the power, please
read this book carefully. Please keep this book for later use.
If the unit is disabled by an electrostatic discharge, please turn off
the power to the unit and turn it back on to reset.
CONTENT
Front Panel Controls..................................................................................
Connection Options...................................................................................
Remote Control Key Functions...................................................................
2
3-4
5
Remote Control
Installing Batteries..................................................................................
..................................................................................
6
6
Connection Instructions.............................................................................
Grounding..............................................................................................
External equipment Connections..............................................................
Antenna Connection.............................................................................
PC Setup.............................................................................................
VCR Setup...........................................................................................
Cable TV Setup....................................................................................
7
7
7
7
8
9
10
External AV Source Setup......................................................................
10
Basic Operating Instructions.......................................................................
11
Turn on the LCD-TV.................................................................................
11
Audio Control..........................................................................................
Mute......................................................................................................
11
11
Select the TV Channel You Want...............................................................
12
Picture Mode...........................................................................................
12
Program Scan.........................................................................................
12
Sleep......................................................................................................
12
Menu Operations.......................................................................................
Picture Menu Options...............................................................................
Picture Menu Options Continued...............................................................
Sound Menu Options................................................................................
Sound Menu Options Continued................................................................
13
13
14
14
15
Function Menu Options.............................................................................
16
Function Menu Options Continued.............................................................
17
Adjust Menu Options................................................................................
Tuning Menu Options..............................................................................
Tuning Menu Options Continued..............................................................
Parental Menu Options.............................................................................
Parental Menu Options Continued.............................................................
17
18
19
19
20-22
23
24
Troubleshooting Guide...............................................................................
Specifications...........................................................................................
Warranty ..................................................................................................
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Controls
HLE20BB
5
2
3
4
1
7
6
HLH15BB
2
3
4
1
7
65
1
2
3
4
5
TV/AV MENU VOL- VOL+ CH-
CH+ POWER
15HL25S/20AL25S
HLH19W
HLH19BB
6
7
7
6
7
6
Control Panel Function
1.TV/AV Selects the input signals: PC/COMPONENT/AV/SV/TV
2. MENU Press to select the main menu
3. VOL-(V-) Volume down / Left orientation to adjust the item in the OSD
VOL+ (V+) Volume up / Right orientation to adjust the item/Press to enter
4. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
5. Power supply switch
6. Power indicator
Illuminates red in standby mode, illuminates green when the display is
turned on
7.Remote Sensor
Receives the signals from the remote control
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Options
HLH15BB/15HL25S/HLE20BB/20AL25S
(The figure is just for reference, please see actual unit. )
AV /S-VIDEO/COMPONENT Audio Input
Connect audio
DC Power Cord Socket
This TV operates on DC
power. The voltage is
output from an external
device to these jacks
Antenna Input
Connect cable or
antenna signals to
the TV, either direc-
tly or through your
cable box.
indicated on the specifications
page. Never attemptto
operate the TV on ac power
Pb
Y
Pr
R
L
V
DC IN
COMPONENT IN
D-SUB IN
PC AUDIO IN
AUDIO IN
VIDEO
S-VIDEO
ANT IN
PC Audio Input
DVD/DTV Input
Connect a component
device to thesejacks
Earphone port
S-Video Input
Connect S-Video out
from an S-Video device
to the jacks.
Connect the PC output
connector from a PC to
the audio input port
D-SUB Input
Connect to the VGA
15PIN analog output
connector of the PC
display card for PC
display purpose
Video Input
Connect video
output from an external
device to this jack
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Options
HLH19BB/HLH19W
The figure is just for reference, please see the real.
And the AC power supply switch is on the back of the set)
Antenna Input
Connect cable or
antenna signals to
the TV, either direc-
tly or through your
cable box.
Earphone port
PC Audio Input
AV/S-VIDEO/
COMPONENT Audio
Input
Connect the audio
output from the pc
to the audio input port
Connect audio output
from an external device
to these jacks
Video Input
Connect video output
from an external
device to this jack
S-Video Input
Connect S-Video out
from an S-Video device
to the jacks.
DVD/DTV Input
Connect a component
video/audiodevice to
these jacks
VGA Input
Connect to the VGA
15PIN analog output
connector of a PC
display card to use set
as a PC display
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Key Functions
When using the remote control, aim it towards the remote sensor on the TV
MUTE
1
2
4
RECALL DISPLAY
EXIT
3
5
1
4
2
5
8
0
3
6
6
8
7
MTS/SAP
9
P.STD
7
9
MENU
TV/AV
10
11
CH+
CH-
VOL
-
VOL
+
12
13
15
14
CCD
SLEEP
SCAN
Illustration of the keys on the remote control:
MUTE
1. MUTE
2.
Power supply switch
Quick TV channel switch(return to the last channel)
Menu exit
3. RECALL
4. EXIT
Display current input signal information
5. DISPLAY
TV channel number select
6. 0-9
Select MONO,STEREO, SAPin NTSC system
7. MTS/SAP
Select picture mode: PERSONAL/STANDARD/MILD/FRESH
To display/exit the main menu
8. P.STD
9. MENU
Select PC/COMPONENT/AV/SV/TV
10. TV/AV
TV channel up/down or select the item of the menu
11. CH+/CH-
12. VOL+
Volume up / to select the main menu/ to adjust the item/ to
enter the submenu.
Volume down / to select the main menu/ to adjust the item
VOL-
Closed caption on/off
Channel scan
13. CCD
14. SCAN
TV sleep button
15. SLEEP
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Installing Batteries
1.Slide open the cover of the battery compartment on the back of the remote
control.
2.Load two AAA alkaline batteries in the compartment. (plus and minus poles to
respective mark)
3.Replace the cover of the battery compartment.
Precautions
As strong light may interfere with the
Make sure that there is no
obstacle between theremote
controller and televisionset.
signals, change yourposition to
operate the remote control if
the television cannot be turned
on or off as expected.
Make sure that two AAA alkaline
batteries are loaded. The batteries
must be of the same type, must be
inserted properly, and must not be
rechargeable.
Keep the remote control
away from heat sources or
humid areas toensure
effective performance of
the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
The connection instructions shown here are for model HLH15BB for reference only.
May differ with the other models mentioned.
Grounding
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connectingit to telephone wires, lighteningrods, or gaspipes.
External Equipment Connections
Antenna Connection
- Antenna or Cable Service with a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
Bronze Wire
RF coaxial wire (75 ohm)
VHF antenna
UHF antenna
Turn clockwise to tighten.
Bronze Wire
Be careful not to bend the bronze
wire when connecting the antenna.
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
To improve picture quality in a poor
signal area, purchase and install a
signal amplifier.
If the antenna needs to be split for two
TV s, install a 2-Way Signal Splitter
in the connections.
If the antenna is not installed properly,
contact your dealer for assistance.
NOTE: Cables shown are not included with the TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
PC Setup
You can use your LCD-TV as a monitor for your personal computer using a VGA
cable (not supplied).
Connection and use steps:
1.Read the userguide supplied with
your computer and ensure that it has
a VGAconnector;
2.Make sure that the power of the LCD
-TV and thePC are off;
D-SUB IN
3.Connect a Dtype 15-pin VGAinterface
cable ( not supplied ) to the VGAvideo
interface connector on the PC. Then
connect the other end to the VGA video
interface connector on the back of the
LCD-TV.Tighten the screwson the VGA
connectors once they are firmly
connected;
4.Turn on the power ofthe LCD-TV first ,
and then turn on the power of the PC;
5.Press the TV/AV button to set the video
input mode ofthe LCD-TV toPC-RGB;
6.Check the imageon your TV. There may be noise associatedwith the resolution,
vertical pattern, contrast or brightness in PCmode. If noise is present, change
the PC modeto another resolution, change the refreshrate to anotherrate or
adjust the brightnessand contrast onthe menu untilthe picture isclear. Ifthe
refresh rate of the PC graphic card can not be changed,change the PC graphic
card or consult the manufacturer of the PC graphic card.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
Composite or S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are off;
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from
the VCR's output jacks to the TV input jacks,
as shown in the figure.
V
IN
When connecting the TV to VCR, match
the jack colors (Video = yellow,Audio
Left = white,and Audio Right = red).
If you connect an S-VIDEO output from
VCR to the S-VIDEO input, the picture
2
1
quality is improved; compared to conne-
.
cting a regular VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner
manual.)
s
VCR
3.Turn on the power of the LCD-TV first ;
and then turn on the power of the AV
device;
4.Press the TV/AV button to set the video
input mode of the LCD-TV to S-VIDEO
mode or AV mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Instructions
Cable TV Setup
- After subscribing to a cable TV service from a local provider you can watch cable
TV programming. The TV cannot display TV programming unless a TV tuner
device or cableTV converter box is connectedto the TV.
- For furtherinformation regarding cableTV service, contact your localcable TV
service provider(s).
Connection Option 1
1. Select 3or 4 withchannel switch oncable
box.
2. Tunethe TV channel to thesame selected
output channel oncable box.
3. Select channelsat the cablebox or with
V
the cable boxremote control.
IN
Connection Option 2
1. Connect theaudio and videocables from
the Cable Box'soutput jacks tothe TV
input jacks, asshown in thefigure.When
connecting the TV to aCable Box, match
the jack colors
(Video = yellow, Audio Left =white, and
Audio Right= red).
2. Select theinput source byusing the TV/AV
button on theremote control.
3. Select yourdesired channel withthe
remote control forcable box.
External AV Source Setup
How to connect
Connect the audioand video cablesfrom
the external equipment'soutput jacks tothe
TV input jacks, as shown inthe figure.
When connecting theTV to external equip-
V
IN
ment, match thejack colors (Video = yellow,
Audio Left =white, andAudio Right =red).
How to use
1. Select theinput source byusing the TV/AV
button on theremote control.
2. Operate thecorresponding external equi-
pment. Refer toexternal equipment ope-
rating guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operating Instructions
Turn on the LCD-TV
When the POWER
button is pressed and the LCD-TV
MUTE
is turned on, the indicator light on the front of the LCD-TV
changes from red to green. When the LCD-TV is turned off
using the power button, the LCD-TV will go into standby
mode and the indicator light turns red.
RECALL DISPLAY
EXIT
1
4
2
5
8
0
3
6
7
9
P.STD
MTS/SAP
MENU
TV/AV
Note:
The display of the input mode
will disappear in3 seconds.
PC
CH+
CH-
VOL
-
VOL
+
TV
CCD
SLEEP
SCAN
COMPONENT
AV
SV
Switch Among Different Inputs: TV / PC / COMPONENT / AV / SV
Each time you press the TV/AV button, TV, PC, COMPONENT, AV, SV,
will appear on the screen in order.
Audio Control
1.Press the VOL+ button to increase the volume. A number will appear
on screen indicating the volume level.
2.Press the VOL- button to decrease the volume. A number will appear
on screen indicating the volume level.
30
Mute
1.Press the MUTE button to mute the sound temporarily. A mute icon
appears on the screen.
2.Press the MUTE button or VOL+/VOL- again to restore the sound.
The mute icon disappears.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operating Instructions
Select the TV Channel You Want
You can use the number keys on the remote control to directly select TV
channels.
The LCD-TV can store up to 181 channels , and you can press the keys on the
remote control or on the panel to make a selection.
Picture Mode
Press P.STD button on the remote control for menu display . For desired mode as
follows:
PERSONAL STANDARD MILD FRESH
Program Scan
Press SCAN button to scan through all the memorized TV channels. The scan
will pause for about 2 seconds on each channel .
If you want to stop the function during auto scanning, simply press the SCAN
button again .
Sleep
Press SLEEP button to set the time : SLEEP 240-SLEEP 180-SLEEP 120
-SLEEP 90-SLEEP 60-SLEEP 45-SLEEP 30-SLEEP 15-SLEEP OFF
This feature allows you to turn off the television after a pre-selected
number of minutes
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
* In this manual, the OSD (On Screen Display) may be different from your TV
because it is just an example to illustrate the TV operation.
Press TV/AV to select the input source, and the menu for each source is
different .
s
1. Press MENU button to display the main menu, and VOL+/VOL-to select the
main menu .
2. Press CH+/CH- to scroll through the parameters
3. Press VOL+/VOL- buttons to make changes to the parameters
4. Press the EXIT button to exit the menu
Picture Menu Options
Picture quality can be adjusted for any input separately .
The picture qualityon the screencan be adjustedas follows:
1. Press MENU button and VOL+/VOL- until the followingmenu appears
on the screen.
PC/COMPONENT MENU
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR TEMP
COLOR
30
30
2
COOL
0
No available incomponent
No available inPC
30
TV/AV/SV MENU
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
50
50
2
50
50
HUE
Only available inNTSC system
Note: Symbols ontop of themenu in thismanual may bedifferent from the actual set
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Picture Menu Options continued
2. Press CH+/CH- button to enter the picture menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Function:
BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it
will add more light to dark parts of the picture and by decreasing the level ,it will
add more dark to light parts of the picture.
CONTRAST : Adjust the contrast of the picture . The contrast becomes higher as
the number increase.
SHARPNESS : Adjust the amount of the detail enhancement , the image
sharpness rises as the number increases (By increasing the level, it will show
cleaner and clearer images and by decreasing the level, it will make picture
smoother).
COLOR : Press VOL+/VOL- to adjust the color
HUE : Adjust the tone of the picture . Appear and be adjusted only under NTSC
mode
COLOR TEMP : Press to select the color temperature from WARM/NEUTRAL/
COOL .
Sound Menu Options
Sound can be adjusted for any input as follows:
1. Press MENU and VOL+/VOL- button until the following menu appears on
the screen
SOUND
50
0
30
70
VOLUME
BALANCE
BASS
TREBLE
AUDIO MODE
AVL
VOICE
OFF
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Sound Menu Options continued
You can adjust sound options to the levels you prefer.
2. Press CH+/CH- button to enterthe audio menuand to goup and downto
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option toyour preference .
4. Repeat step2 and step3 until desiredsound quality hasbeen achieved ..
Function :
VOLUME :Adjust the volumeof your TV
BALANCE : Adjust the balanceof the audiooutput from leftto right . When
indication value of balance increases toward +50 , sound of the left speaker
becomes weaker . When indication value of balance decreases toward -50 ,
sound of the right speaker become weaker .
BASS : Adjust the bass of the sound . Can only be adjust under PERSONAL mode .
TREBLE : Adjust thetreble of thesound . Canonly be adjustunder PERSONAL
mode .
AUDIO MODE : Press VOL+/VOL- to select amongPERSONAL, VOICE, MUSIC
and THEATRE .
AVL: Automatic Volume Limit Control reduces the effect of high volumes by
the limiting the same volume to all channels .
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Function Menu Options
Menu Language Selection:
The menus can be shown on the screen in the selected language. First select
your language.
1. Press MENU button and VOL+/VOL- until the following menu appears
on the screen.
FUNCTION
INPUT SOURCE
LANGUAGE
CC MODE
TV
ENGLISH
OFF
BLUE SCREEN
RESET
ON
2. Press CH+/CH- button to enterthe function menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired settings have been achieved .
Functions:
1. INPUT SOURCE : Display current mode . There are PC, COMPONENT ,
AV , SV ,TV to display .
2. LANGUAGE : Press VOL+/VOL- to select the OSD language.
3. CC MODE :Press VOL+/VOL-buttons to select the Closed Caption options.
Closed Captioning helps the hearing impaired with the broadcast program,
as well as helping children learn how to read. A built in decoder displays the
audio portion of a program as text on the screen when this option is selected.
OFF: When OFF is displayed on TV, it means CC MODE is turned off.
CC1: When CC1is displayed on TV means CC MODE is turned on.
CC2 to CC4: For other modes of video related broadcast information.
TT1: For program guide and other information displayed by broadcasters.
(This blocks a large portion of the picture on your screen).
TT2 to TT4 :For other modes of information displayed by broadcasters.
(This blocks a large portion of the picture on your screen).
IMPORTANT: Closed captioning availability entirely depends on broadcasters
supplying the signal. Therefore, closed captioning might not always be
available and language availability will differ by broadcast.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Function Menu Options Continued
Note: Select CC1 for full translation of the primary language such as English in
your area. Select CC2 for secondary language translation such as French or
any other language that may be broadcast in your area.
4.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. To set On, the screen
will be in blue screen after 3 seconds if there is no signal.
5. RESET : Press VOL+ to reset some settings to the factory default .
Adjust Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
ADJUST
AUTO CONFIG
PHASE
CLOCK
H POSITION
V POSITION
0
50
50
50
Note: This menu is only appears in PC mode .
2. Press CH+/CH- button to enter the adjust menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved ..
Functions:
AUTO CONFIG : Is opted for adjustment of picture location frequency and phase
parameters .
PHASE : Removes any horizontal distortion and clears or sharpness the displayed
characters .
CLOCK : Adjust the TFT-LCD to match the PC input source
H-POSITION : Picture horizontal position adjust
V-POSITION : Picture vertical position adjust .
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Tuning Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
TUNING
CHANNEL
SKIP
AFC
1
OFF
ON
FINE TUNE
ANTENNA
AUTO PROGRAM
CATV
Note: This menuis only appearsin TV mode.
2. Press CH+/CH- button to enterthe turning menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4.Repeat step 2 and step 3 until desired settings have been achieved .
Functions:
1. CHANNEL : Press VOL+/VOL-togo up and down to setthe channel position.
The display will show the current playing channel.
Channel Coverage by Antenna:
Antenna Type
VHF
UHF
Channel Range
2-13
14-69
CATV
1-125
2.SKIP : If you want skip a channel , press VOL+/VOL- to select ON , and this
channel will be skipped next time when you press CH+/CH- . You can press
the digit buttons to select the channel . If you want to restore the channel , select
OFF.
3. AFC : Auto frequency control. Select ON toimprove the image quality .
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Tuning Menu Options Continued
4. FINE TUNE : If the image and / or sound received is not very good , you can
press CH+/CH- to select FINE TUNE in the menu. Then , press VOL+/VOL-
button to adjust and improvethe image quality. Do not use thisfeature unless
reception is poor.
5. ANTENNA: Press VOL+/VOL- button to selectAIR (VHFand UHF) andCATV
reception preference.
6. AUTO PROGRAM : Auto search and save the channel .Press the VOL+ button
to start automatic search functionoperation. Allchannels now available
will be automaticallypreset in order.After the search has finished,
the first program number willdisplay on thescreen. This search automatically
adds only theactive channels inyour area tothe TV's memory. It deletes any
channels on which there is no broadcast or a poor signal.
Note: The AUTO PROGRAM function willscan the channelson the selected
antenna input. If the TV is connected to cable, please select CATV under
' ANTENNA ' sub menu.
Parental Menu Options
1. Press the MENU and VOL+/VOL- button until thefollowing menu appears
on the screen .
2. Press CH+/CH- button to select PASSWORD .
PARENTAL
PASSWORD
----
3. Then input the password0000. It will bring parental menu display on the
screen. You will see the ollowing menu on your screen:
PARENTAL
CHILD LOCK
MPAA
PG RATING
PG CONTENTS
CAN. ENGLISH
CAN. FRENCH
CHANGE PASSWORD
OFF
PG
TV-14
--DV--
C8+
8+
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Parental Menu Options Continued
This function enablesyou to blockcertain TV channels in accordanceto the
requirements established by the FCC.
2. Press CH+/CH- button to enterthe PARENTALmenu and togo up anddown to
select the desired option .
3.Press VOL+/VOL- button to gointo PG RATING and MPAA
Press VOL+/VOL- button to setthe CHILD LOCKON and PARENTALLOCK OFF.
4. Repeat step 2 and step 3 until desired quality has been achieved .
CHILD LOCK:Child Lock off means the lock function is turned off . If the
Child Lock is in"off" mode then function willnot be activeto accept the
broadcast signal.Child Lock on means the lock function is turned on. If the
lock is inthe "on" modethen function isactivated to acceptthe broadcast signal.
MPAA: When MPAA ratingis selected, youcould select OFF/G/PG/PG-13
R/NC17/X .
PG RATING:Select the TV Rating option. You could selectfrom OFF/TV-Y/TV-Y7/
TV-G/TV-PG/TV-14/TV-MA.
PG CONTENTS: Pressto set thegrade of theprogram . Whenthere is this
grade of program , this program will not be display .
CAN. ENGLISH: Selectthis option. You could select fromOFF/E/C/C8+/G/PG/
14+/18+ .
CAN. FRENCH: Selectthis option. You could select fromOFF/E/G/8+/13+/16+/
18+ .
CHANGE PASSWORD: The "Default Password" presetby the manufactureris
"0000" . If you want to change the presetpassword to yourown password, just
choose any four digits that can be easily remembered and set. Once you set
password for a particular channel, that channel will be blocked.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Parental Menu Options Continued
PARENTAL LOCK TECHNOLOGY:
The "P.L. Technology" allows you to use U.S. and Canadian Movies and TV
PROGRAMS Guide ratings to block certain types of TV programs and movies.
To clearly understand TV program rating codes, read the following information:
U.S. TV Program Ratings
NR: Not Rated-this means that programs are not rated or rating does not apply.
TV-Y: For all children - these types of rated programs are designed for a very young
audience, including children from ages 2-6.
TV-Y7: Directed towards older children - this type of rated programs may include
comedic violence of mild physical, or may frighten children under the age of 7.
TV-G: General audience - these types of rated programs contains little or no
violence, no strong language, and little or no sexual dialogue and situations.
TV-PG:Parental Guidance Suggested-this type of rated programs may contain
limited violence, some suggestive sexual dialogue and situations, and rare
language.
TV-14: Parents strongly cautioned-these types of rated programs may contain sexual
content, strong language and more intense violence.
TV-MA:Mature audience only these types of rated programs may contain sexual
violence, explicit sexual content and profane language.
FV: This type of rated programs contain Fantasy and cartoon violence.
Violence: This type of rated programs contain violence.
S:
L:
D:
This type of rated programs contain sex.
This type of rated programs contain offensive language.
This type of rated programs contain dialogue with sexual content.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operations
Parental Menu Options Continued
To understand clearly about movie rating codes, read the following list:
U.S. Movie Rating Chart
NR: This means movie is not rated yet. It is pending government rating approval.
G:
General Audience-this type of movie rating means all ages admitted to see
the movie.
PG-13:Parents Strongly Cautioned - this type of movie rating means some material
may not be appropriate for children under13.
R:
Restricted- This type of movie rating means children under 17 of age require
to be with parent or guardian.
NC-17:This type of movie rating means no one 17 and under admitted.
X: This type of movie rating means adults only.
To clearly understand Canadian program rating codes, read the
following list:
Canadian English Rating Chart
E: These types of programs are exempt from the rating system. Exempt
programming includes: news, sports, documentaries, talk shows, music
videos, and variety of other programs.
C: This type of programming is intended for children under age 8. There is no
offensive language, nudity or sexual content.
C8+:These types of rated programs are generally considered acceptable for children
8 years and over. There is no profanity, nudity or sexual content.
G: These types of rated programs are generally suitable for all audiences.
PG: Parental Guidance Suggested -in these types of rated programs, some material
may not be suitable for children.
14+: In these types of rated programs, some content may not be suitable for viewers
under the age of 14.Parents are strongly cautioned not to have their children
view 14+ rated programs by pre-teens and early teens.
18+: Adults Only-these types of rated programs are only for adult viewers only.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
To assist in location possible faults use help guide below.
Troubleshooting
Verify ifthe television isproperly plugged in.
Verify ifthe television isproperly supplied withpower.
Verify thatelectricity is available.
No picture, no sound
Verify if correct signals are input.
Press TV/AV button to change signal input to TV input.
Restart the television of power supply is interrupted.
Blank screen
Press MUTE buttonand verify ifMute mode ison.
Switch to anotherchannel and verifyif the sameproblem
happens.
No sound
Press VOL+ buttonto see ifthe problem canbe solved.
Verify ifsound system isfunctional. Refer tochapter on
adjusting.
Poor sound
Verify ifcorrect channel isselected.
Adjust the antenna.
Make adjustments byFINE TUNE
No picture in some
channel
Verify if the same problem exists in other channels.
Check picture and sound systems.
Refer to relative instructions in the Manual for color
adjust.
No color for some channel
program (black and white)
Verify ifthe antenna iscorrectly connected.
Verify ifthe antenna isin good condition.
Make fine adjustmentof channel.
Spots with some or
all pictures
Disconnect the televisionfrom power supplyand, 10
seconds later, reconnect to thepower supply.
If the problemstill exists, contactan authorized
service depot fortechnical assistance.
Abnormal functioning
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized
service center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the backcover as theTV set has dangerous voltageslevels inside thatmay be
fatal or causefire.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model
HLH15BB/15HL25S
NTSC-M
HLE20BB/20AL25S
Picture, sound
system
Audio output
1.5W+1.5W
AV input PC input S-VIDEO input PC audio input
Headphone output YPbPr input Antenna input DC input
External input port
Input: 110V~ 60Hz,
48W
Output:
AC-DC adapter
--- 12V
60W
Power consumption
Working:5 C~35 C
Storage:-10 C~45 C
Temperature
Accessories
Remote control
Batteries
User manual
AC-DC adapter
Model
HLH19BB/HLH19W
NTSC-M
Picture, sound
system
Audio output
1.5W+1.5W
AV input PC input S-VIDEO input PC audio input
Headphone output YPbPr input Antenna input
External input port
120V~ 60Hz
60W
Power requirements
Power consumption
Working:5 C~35 C
Storage:-10 C~45 C
Temperature
Accessories
Remote control
Batteries
User manual
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Warranty
90 days labor
and one year parts .
Download from Www.Somanuals.com. All Manuals Search And Download.
V0.3
0090508051A
Download from Www.Somanuals.com. All Manuals Search And Download.
|