Haier Clothes Dryer HDY6 1 User Manual

Name of Parts

Condenser Tumble Dryer

HDY6-1

Container handle

Top

Button

Program selector

Door

Plinth

Bottom plaque

Table of Contents

Befroe using the dryer

Name of Parts....................................1

Important Safety Instructions .....2-3

Installation.....................................4-6

Preparation ......................................7

Earth terminal

Power supply cable

Rear footplate

Back plate

Back cover board

How to operare the dryer

Control panel.................................8-9

Programming guide.........................10

Drying methods ...............................11

Drainage outlet

Maintenance

Cleaning and maintenance .......12-13

Trouble shooting .......................14-15

Warning

Read all instructions before using dryer.

Wiring circuit ..................................16

Specifications .................................17

dryers are provided with operating,care and in-

stallations instructions

SAVE THESE INSTRUCTIONS

This diagram may be slightly different from the layout of the washing machine you

have just purchased due to techincal improvements

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safety Instructions

To reduce the risk of fire, electrical shock, or injury to

persons when using this dryer, follow basic precautions,including

the following:

17.If the supply cord is damaged,it must be replaced by the manufacturer ,its service agent

or similarly qualified persons in order to avoid a hazard.

18.Do not operate the dryer if any parts are missing or broken.

1.Read all instructions before using this dryer.

19.Do not store or use gasoline or other flammable vapors and liquids in the vicinity of the

appliance.

2.Do not dry items that have been previously cleaned in,washed in, soaked in, or spotted

with gasoline, cleaning solvents, kerosene, waxes, etc. Do not store these spotted with

gasoline, cleaning solvents, kerosene, waxes, etc. Do not store these items on or near the

dryer. These substances give off vapors that could ignite or explode.

3.Do not allow children to play on or in the dryer. Close supervision of children is necessary

when the dryer is used near children.

20.Keep surrounding areas free from the accumulation of lint, dust and dirt.

21.Avoid fire hazard or electrical shock. Do not use an adaptor plug or extension cord

or remove groundingprongfromelectricalpowercord. Failure to followthis warning can

cause serious injury, fire or death.

22.The appliance must not be installed behind a lockable door ,a sliding door or a door

with a hinge on the opposite side to that of the tumble dryer.

4.Before the dryer is removed from service or discarded, remove the dryer door to prevent

accidental entrapment.

5.To prevent injury, do not reach into the dryer if the drum is moving.Wait until the dryer

has stopped completely before reaching into the drum.

6.Do not install or store this appliance where it will be exposed to water and /or the weather.

7.Do not tamper with controls.

8.Do not repair or replace any part of the appliance or attempt any servicing unless specifically

recommendedin the user-maintenance instructions or in published user-repair instructions

that you understand and have skills to carry out.

9.To prevent fire, do not use heat to dry items containing plastic, foam rubber or similarly

textured rubber-like materials, or items containing feathers or down.

10.Do not place items exposed to cooking oils in your dryer. Items contaminated with

cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

11.Clean lint screen before or after each load.

12.This dryer must be properly installed in accordance with the installation instructions before

it is used .

13.To prevent shock hazard and assure stability during operation, the dryer must be installed

and electrically grounded by a qualified service person in accordance with local codes.

14.Always disconnect dryer from electrical supply before attempting any service.Disconnect

power cord by graspingthe plug ,not the cord.

15.The dryer must only be used for its intended purposed.

16. Do not sit on top of the dryer.

ꢀ

ꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Dimensions

a = 855 mm

b = 620 mm

c = 595 mm

Weight = 38 Kg

Installation

Column Installation

To save space, the dryer may be installed

on a prepositioned drum washing machine

using a folding frame. This dryer can be

placed with the HBF series washers by a

folding frame. For specific installation, refer

to the instructions for the installation of the

folding frame.

Change the door-opening direction

If the direction of opening the dryer's door is

not suitable to the location, its opening direction

may be changed. The detailed operating

procedures are as follows:

ƵScrew off the 4 screws(1) fixing the door's

hinge to remove the door(5);

Packing accessories

Checklist of the accessories and materials provided with the machine:

Owner's

manual

Certificate of

Conformity

Name

Drainpipe

Quantity

ƵRemove the hinge(3) from the door and

take off the hinge cover(4) at the other side

ꢀ

and fix the hinge back;

ꢃ

ꢅ

ƵScrew off the screws fixing the door

switch(6) to remove the door switch. Take

off the door switch cover(7) at the other

side and fix the door switch back;

ƵPut the removed hinge cove(4)r and

door switch cover(7) into the side opposite

to the door;

ꢇ

To ensure the dryer operating normally, attention must be paid to

the following in placement:

Ƶ The dryer must be horizontally installed. Its bottom is equipped

with adjustable base angles. Adjust these 4 angles to level before

operation;

Ƶ Check whether there is any damage to the dryer during

transportation. Any damaged dryer must not be electrified. In case

of any damage, contact your dryer supplier;

Ƶ The dryer must be kept away from flammable or detonable substances˗

Ƶ The surrounding environment must be dry and ventilated;

ƵꢄDo not install the dryer on any hairy carpet because the normal

ventilation of the vent hole may be blocked˗

ꢁ

ꢅ

ꢂ

ꢆ

ƵRemove the 4 corks and the door lock

cover from the front panel and put them on the other side of the

front panel;

ƵFix the door on the other side of the machine.

Drain switchover

During the drying of the laundry, the condensate water is automatically

collected in the box inside the machine, so that the water needs to

ƵꢄTo allow the dryer to perform better, the ambient temperature shall

not be lower than 10

ꢄꢄ

nor higher than 35ćꢀ

ꢂ

ꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparation

Installation

Attention˖

be removed from the box after every drying of the laundry. If your

dryer is in the vicinity of a drainage, you may allow the condensate

water being discharged directly into the drainage through the drainpipe

provided as accessory so that to avoid emptying the box for every time.

The method to connect the drainpipe is as follows:

1. Loosen the hose clip with the drain switchover joint;

2. Pull the hose off the joint;

3. Install the accessory drainpipe in place;

4. Fix the hose clip.

Note: The outlet of the drainpipe must not be higher than 1.2 m above

the floor.

1. Before operation, clean off the dusts and dirties inside the drum

of the dryer by a wet towel;

2. Clean off debris on the filter screen and in the duct to increase the

drying efficiency.

Turning on power

Before turning on the power for the dryer, check:

ƵWhether the supply voltage is in accordance with the value indicated

on the nameplate;

ƵWhether the supply receptacle can withstand the maximum power

load to the dryer;

ƵWhether the supply receptacle is in accordance with the plug of the

dryer. If not, replace the power supply cable or receptacle to make

them accord with each other; The replacement of the power supply

cable must be made by a qualified professional or our authorized

service agent;

ƵThe dryer must be grounded securely.

Treatment of laundry to dry

ƵCheck whether the laundry to be dried is suitable to be dried in the dryer;

ƵThe dryer can only dry the laundry that has been spun dry. Do not

put too wet laundry into the machine;

ƵEmpty all pockets of the laundry with such items as keys and coins

and remove the adornment that is not suitable to be dried;

ƵPull up zippers, sew and mend up loosened fasteners and tie up

dispersed ribbons to prevent the laundry from being entangled. If

necessary, put small items into a net.

ƵTo achieve a better drying result, shake the heavy laundry and make

it loose before load it into the dryer.

Load to dry

Synthetic fabric

Laundry type

Cotton fabric

Maximum load

ꢆ.J

Warning: Do not dry wool, silk, down and other delicate fabrics to avoid

damage to fabrics.

ꢇ

ꢆ

Download from Www.Somanuals.com. All Manuals Search And Download.

Control panel

)

E - Condensate collection box handle

The condensate collection box is used to store the condensate during

the drying. When the program is complete, empty the condensate

collection box timely.

o C

F - LED screen

n o t

P e

l i

h s

n i

n t e f t

n s i

The screen displays the remaining time for a program, the delay time

and other related information.

(

Note: The remaining time to start a program is the default time for the

program. During the operation, with the variation of the factors such as

the moisture content the actual remaining time program will be automatically

adjusted until the preset drying result has been achieved and the program

is complete.

A - Program knob

Turn this knob to choose the drying program you desired. This type of

dryer has 15 program options available for you to choose. For description

of specific programs, refer to the list of programs on Page 10. At the same

time, this knob also serves as a power switch. When it is turned to "OFF,"

the power supply turns off; when the drying program is selected, the power

supply turns on.

G - Indicator light for cleaning up the condensate collection box

When this light is on, it indicates that the condensate collection box is

full of condensate. Please empty the box. At this time the operation of

the program will be halted. After the box is emptied, press the Start/Pause

button and the program will continue to operate.

B - Start/Pause button

After turning on the power, select the drying program you desired.

Gently touch this button to start the dryer. Gently touch this button again

during the operation of the dryer and the indicator light and display screen

will flash digits and the machine will be halted. Press the button again and

the program will continue to operate.

H - Indicator light for cleaning the filter screen

When this light is on, it indicates that the program has operated in the

cold air cycle and will be complete soon. It prompts the user to clean the

filter screen after the program is complete.

C - Delicate button

After this function is selected, the corresponding indictor light will be

on and the low power heater will operate. During the operation of a program,

the drying temperature will decrease so as to have a better care of the

delicate laundry.

CˇD composite button and children lock function

During the operation of a program, you may press and hold down both

buttons for 10 seconds to set up the children lock function if necessary.

At this time, the display screen shows the remaining time and the lock

alternatively, and the control panel will be locked. Press and hold down

both buttons for 10 seconds once again and the children lock will release.

D - Delay button

Gently touch this button before a program starts. You may choose to

start the dryer after a preset time. The delay range is between 1 and 24

hours. Every touch of the delay button will make an increment of one hour.

When in excess of 12 hours, the remaining time will be redisplayed. After

a delay time is set, gently touch the Start/Pause button to the start the

delay operation and the indicator light will flash.

ꢉ

ꢈ

Download from Www.Somanuals.com. All Manuals Search And Download.

Drying Methods

Programming Guide

1ǃTurning on power

Insert the power plug into an appropriate receptacle to turn on the power.

Operating power supply: (220-230)V̚/50Hz.

Degree of

Recommended Laundry Type

Max.Lading

Program

Time

2:00

1:50

1:40

Drying

Very dry

Heavy cotton fabrics, sheets

Cotton fabrics, sheets, coats

ꢆ.J

2ǃLaundry loading

Open the door and place the treated

Reference weight of fabrics for drying

Dry

ꢄƽJeans ꢌꢈꢊꢊJꢍ

Overalls

(cotton appr 950g)

laundry into the drum of the dryer.

To save energy and achieve a better

drying result, please spin the laundry as

dry as possible. Place the laundry evenly

into the drum after shake them loose.

Note: Do not put excess laundry into

the dryer to avoid damage to the dryer

and laundry.

Ordinary cotton fabrics

Slightly damp

ꢆ.J

ƽ Pajamas

ƽ Blended fabric

clothes

(appr 800g)

(appr 200g)

ƽShirts

(appr 300g)

Ironing damp

1:30

1:20

T-shirt

Underwear

(appr 300g)

Machine

ironing damp

( appr 70g)

ꢆ.J

ꢁ.J

ƽ Socks

(blended fabrics

appr 50g)

ƽ Jackets (cotton

appr 800g)

ƽ Single bed sheets

(cotton appr 800g)

ƽ Woolen blankets

(appr 3000g)

Ordinary synthetic fabrics

Very dry

Dry

1:00

0:50

0:40

3ǃSetting drying program

Turn the program knob to set an optimal drying program according to the

laundry type and the drying result desired to achieve.

Ordinary synthetic fabrics

Blend fabrics

Slightly damp

Ironing damp

4. Delicate function setting

0:30

1:00

For the delicate laundry that needs special care, choose this function button.

Once this function is selected, the drying program will operate with a low heating

power and the drying temperature will be low too. And the drying time will automatically

increase by 20 minutes.

Heavy fabrics, needing further

drying

Heavy fabrics, needing further

drying

Timing drying

for 20 minutes

Timing drying

for 30 minutes

0:20

ꢆ.J

ꢀꢊ

ꢁꢊ

5. Delay setting

You may choose to start the dryer after a preset time. The delay range is

between 1 and 24 hours.

0:30

0:40

Timing drying

for 40 minutes

Timing drying

for 60 minutes

Heavy fabrics, needing further

6. Program operation

After a program is set, gently touch the Start/Pause button to start the program.

ꢆ.J

ꢂꢊ

drying

Heavy fabrics, needing further

drying

ꢆ.J

1:00

0:20

ꢆꢊ

7. Program completion

Before the drying program comes to end, the dryer will enter in the cold air

cycle where the heating will stop.

Cold

Delicate fabrics

ꢋ

After the program is complete, the display screen will display "End." Open

the door to remove the laundry.

If the laundry is not removed in time after the drying program is complete,

the dryer will start in the anti-crease protection cycle automatically.

In the anti-crease protection cycle, the dryer's drum will run in a set interval

to keep your laundry loose.

Note:

1ǃLaundry drying time may extend or shorten depending on the following:

ƽ Fabric type;

ƽ Amount of loaded fabrics;˗

ƽ Degree of spinning dry of fabrics;

ƽ Ambient temperature..

8. Turning off the dryer

Turn the program knob to the "OFF" position to cut off the power supply and

turn off the dryer.

2ǃBefore the laundry is dried, check the labels on the fabrics carefully. Do not put

those that cannot be dried by a machine into the dryer to dry them, particularly the

delicate fabrics. Too high temperatures may cause damage to them.

ꢅꢅ

ꢅꢊ

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and Maintenance

1ꢎCleaning the surface

- Using a coin or other tool, push the slides on the cover to the position

as shown in the figure and then remove the cover;

- Turn the condenser's handle 90 degrees in the direction as shown in

the figure;

Wipe off the dusts and dirties on the body of the dryer and the surface

of the main control panel by a cleaning cloth. Remember not use any organic

solvent or corrosive agent in cleaning to avoid damage to the machine.

- Remove the condenser from the dryer;

2. Cleaning the filter screen

- Clean the condenser by a brush or flush it by a water jet;

Note: Do not use a sharp tool in cleaning the heat exchanger, otherwise

it may damage its sealing performance;

- Put the condenser back in place and lock up the cover;

- Put the lower deco panel back in place.

To ensure a good ventilation effect during

drying, the filter screen must be cleaned after

every drying program is complete.

Open the door to remove the filter screen

from the machine. Open the screen and clean

off the lints on the screen and handle by a wet

towel. After cleaning, put the screen back in place.

3. Empty the condensate collection box

During the operation of a program, steam

condenses into water is collected in the box.

The box must be emptied in time after the

program is complete.

- Hold the handle of the box and take out the

box. When the box is taken out, keep it level

to prevent the condensate from overflowing;

- Pour away the condensate water. Note: the

condensate water can not be used for drink or

for food processing;

5. Cleaning the drum

After the dryer has operated for

a time, fabric caring agents or

calcium contained in the water will

form an almost invisible segregation

layer on the inside of the drum.

This makes the dryer not able to

reliably and accurately identify the

dryness of the laundry. So the inside

of the drum, especially the stainless

steel pieces on the blades must be

cleaned regularly by a wet cloth.

- Put the box back in place.

If the box has not been cleaned in time, the

dryer will alarm automatically when the box

is full. The indicator light is on when the box

is emptied and the dryer will stop. It will not

restart until the box is emptied.

4.Cleaning condenser

The condenser must be cleaned monthly.

Cut off power supply before cleaning.

- Hold the protrusions on both sides of the

lower deco panel and open the lower deco

panel;

ꢅꢁ

ꢅꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble shooting

Prompt and Alarm Information

In case of an improper operation or trouble with the machine when it operates, the

code corresponding to the trouble will be displayed on the display screen:

Those listed below are not failures. The following must be confirmed before

calling for service:

Problem

Possible Cause

Cause

Code