|
The information in this User Guide is based on the production standard
model of the D1200P CDMA mobile phone. As Haier Telecom Company
follows a policy of continuous development, the company reserves the
right to make adjustments, changes or revisions to all information given
herein, without prior notice. Haier Telecom Company makes no warranty
of any kind with regard to the contents given, including, but not limited to,
the implied warranties of merchantability and fitness for
a
particular
purpose. Furthermore, Haier Telecom Company shall not be liable for
errors contained herein or for incidental or consequential damages in
connection with the furnishing, or use of this material. No portion of this
document may be photocopied, reproduced, or translated to another
language without the prior written consent of Haier Telecom Company.
This User Guide is edited and printed by the Haier Group Company.
Copyright@2007 Haier. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1.Essential information ....................................................................................1
2. Handset guide ..............................................................................................5
3. Menu overview ...........................................................................................21
4. Input method ..............................................................................................66
5.USB windows device driver installation guide.............................................68
6. Modem installation guide............................................................................76
7. Frequently asked questions (FAQ).............................................................79
8.Trouble shooting.........................................................................................81
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.Essential information
Given here is essential information that will help you in the optimum operation of
your mobile phone. By adhering to these guidelines you will be protecting
yourself from unnecessary personal or financial damages or infringements of
the law. Kindly read the User Guide in its entirety for complete information.
1.1 Safety guidelines
Traffic regulations
Traffic and road safety regulations prohibit your usage of the phone while driving.
If, however the need arises, please do make use of the hands-free settings or
move your car to the side of the road out of the flow of traffic. In case you use an
air bag equipped vehicle, please do not place your phone in the air bag
deployment area, it could result in serious personal injury and possible property
damage.
Switch off your phone at filling stations and sensitive areas
Areas with a potentially explosive atmosphere are often, but not always, clearly
marked. These include fuelling areas such as fuel filling stations, below decks
on boats, fuel or chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air contains
1
Download from Www.Somanuals.com. All Manuals Search And Download.
chemicals or particles, such as grain, dust, or metal powders; or any other area
where you would normally be advised to turn off your vehicle's engine. Electric
or static sparks in such areas could cause an explosion or fire resulting in
serious injury or even fatalities.
Switch off your phone on aircraft
Follow airline advisories on phone usage. Radio Frequency emissions from
wireless devices such as your phone can cause electronic interference or
disturbance in the delicate communication and control electronic equipment of
the aircraft.
Switch off your phone in the hospital
Switch off your phone in healthcare facilities when any regulations posted in
these areas instruct you to do so. Hospitals or healthcare facilities may be using
equipment that could be sensitive to external RF energy.
Pacemakers and medical implants
The Health Industry Manufacturers Association (USA) recommends that
minimum separation of six inches (15 centimetres) be maintained between a
handheld wireless product and medical implants (electronic) such as
a
a
Pacemaker to avoid potential interference with the implant. These
recommendations are consistent with the international recommendations
2
Download from Www.Somanuals.com. All Manuals Search And Download.
governing the usage of wireless technology.
Advisory for persons with Pacemakers:
ALWAYS keep the phone more than six inches from your pacemaker when
the phone is turned on.
Do not carry the phone in a breast pocket.
Preferably use the ear opposite the pacemaker to minimize the potential for
interference.
If you have any reason to suspect interference is occurring, switch off your
phone immediately.
Other medical devices
If you use any other personal medical device, do consult the manufacturer of the
medical device to determine if it is adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining this information.
Follow mandatory signs
Always follow phone etiquette in public places. Switch off your phone where the
use of mobile phones is explicitly forbidden, as it may be a safety risk or might
infringe on the law.
Emergency calls
Emergency calls can be dialled at anytime - even if the handset is PIN locked or
3
Download from Www.Somanuals.com. All Manuals Search And Download.
has no RUIM card.
Emergency call procedure:
Type in the local emergency number and press the send key.
Emergency call numbers are: 100/101.
Electronic devices
Most modern electronic equipment is shielded from Radio Frequency (RF)
energy emissions. However, certain electronic equipment may not be shielded
against the RF signals emitted by your phone and care must be taken in usage
of your phone next to sensitive electronic equipment.
1.2 Care and maintenance information
Your phone is an electronic device that should be treated with due care during
usage. The guidelines given here will help you in caring for your phone and
keep it under warranty coverage.
Protect your phone from dust, temperature, humidity and other extreme
environmental conditions as it will affect the performance or damage the
instrument. Do not use or store your phone in a low temperature environment as
moisture will condense in the phone and damage the circuit board.
Avoid striking, shaking or causing physical shock to the phone.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Protect your phone from rain, spilled beverages or other forms of moisture
that can damage the electronics of your phone.
Use the batteries and fittings manufactured by Haier Telecom Company only.
The use of other fittings may cause dangerous accidents and void all warranties.
Do not disassemble the phone or its accessories. If service or repair is
required, contact a Haier authorized service centre.
Do not inadvertently cause short-circuit by placing metal or conductive
material across or on battery terminals.
Keep your phone and accessories out of the reach of young children.
Do not use chemical solvents or detergents to clean your phone.
2. Handset guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 Keypad
2.1.1 Power /End key
The red key on top right corner of the keypad is power key. Pressing and
6
Download from Www.Somanuals.com. All Manuals Search And Download.
holding the key can switch on/off the mobile phone. Pressing the key once can
end a call during a phone call, or pressing the key twice can reject an incoming
call. Pressing the key in the menu can also return to the idle mode.
2.1.2 Send key
The green key on top left corner of the keypad is the send key. You can dial or
answer a call with the key. In idle mode, pressing the key can lead you to the
recent calls list.
2.1.3 Left/ Right soft key
The Left/Right soft keys are used to carry out the corresponding operation of
last line on display screen, in accordance with the procedure are adopted to
acquire different functions.
In idle mode, press key to enter the Menu function, press key to enter the
Names function.
2.1.4 Four ways navigation key
The navigation keys can control the cursor directions. Left/right key can move
the cursor in text editing mode left /right. Up/down key can scroll the cursor in a
list up/down.
In idle mode:
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Up key: Press this key to enter the Profiles menu directly.
Left key: Press the key to enter the Scheduler menu directly.
Right key: Press the key to enter the Messages menu directly.
Down key: Press the key to enter the Names list.
2.1.5 OK/Hot key to WAP
The OK/Hot key places within the 4-way navigation keys. Pressing this key in
idle mode allows you to access the WAP menu.
Pressing the key in the menu mode confirms the selected options or enters the
next menu.
2.1.6 # (hash) key
In idle mode, you can press and hold key to switch the Vibrate Mode on or off.
In text editing mode, press
key to change input methods.
2.1.7 * (star) key
In idle mode, press and hold
key to lock the keypad. By pressing any key, the
screen displays message 'Keyguard active, press 123 to unlock keypad'.
Then press 123 to unlock.
In text editing mode, press
2.1.8 Numeric keys
key to switch to symbol mode.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Pressing these keys can enter the digits 0 to 9 (in idle mode or in number-
inputting mode) or some associated characters (text editing mode) and perform
associated functions (in a list).
2.1.9 Volume side key
You can adjust the earpiece volume using side keys directly during a call or in
idle mode except vibrate only mode
.
2.2 Idle mode screen
2.2.1 Screen indicators and icons
Depending on your wireless service provider, some or all of the following
indicators and icons may be displayed on your phone's screen.
When the phone is powered on, the following icons may be displayed:
2.2.1.1Battery level indicator
The Battery Level Indicator shows the representative charge held by the
phone's battery. Bar segments within the Battery Level Indicator show the level
of charge held. All bars visible indicate a full charge. If only one or two bars are
visible, it means the battery is low.
2.2.1.2 New message
The icon is displayed on your screen when a new message arrives. The new
9
Download from Www.Somanuals.com. All Manuals Search And Download.
message icon disappears when you read all the unread messages.
2.2.1.3 Full message
When the SMS storage is full, the icon appears and the phone display shows
'SMS capacity full. Pls erase msg to proceed'
One or more messages must be erased before the new message can be stored.
2.2.1.4 Alarm clock
The icon appears when the daily alarm or the alarm for the specified date and
time is set.
2.2.1.5 Scheduler
The icon appears when the scheduler is set.
2.2.1.6 Network
Composed of two parts. The left part indicates that the mobile phone is duly
registered to a network. The right part shows the signal strength.
2.2.1.7 Voice message
The icon indicates that the voice mail has a voice message (This function must
be supported by your network).
2.2.1.8 Profiles
You can easily alter the phone tone (e.g. the ringer volume, earpiece volume,
etc.) according to your environment.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
When a profile is available, the icon corresponding to the profile name is
displayed in idle mode:
Vibrate only: For use when vibrate only is needed.
Silent:For use when silence is needed.
General:Is the default setup.
Outdoor:For use in the outdoor.
Meeting:For use in a meeting. The default setup is the silent mode.
Headset:For use when insert the headset.
2.2.2 Idle mode screen events
2.2.2.1 Idle mode
The mobile phone enters idle mode without any operations after the phone is
switched on. You can view the current time and date in idle mode. You can dial a
number by pressing
2.2.2.2 Calling
key if you input a telephone number.
You can make a phone call after the number is dialled.
2.2.2.3 Missed calls
The missed calls and their numbers will be shown on the screen in idle mode.
Press key to view the list.
2.2.2.4 New messages
11
Download from Www.Somanuals.com. All Manuals Search And Download.
When the new message is received:
1.Your phone makes alert tones (ringer, vibration or silence).
2.If the keypad is unlocked, your phone display will show 'You have 1 new
message!'. Press
again to operate options. Press
new message-prompting icon is displayed on the screen.
key to view the message's contents and then press
key
key or key to return to the idle mode, the
3.If the keypad is locked, your phone display will also show 'You have 1 new
message!'. But you can't view the contents.
Note: If the message is urgent /emergency, your phone displays ' You have 1
new message (Urgent/Emergency)! '.
2.3 Installing Battery and RUIM card
2.3.1 Installing the battery
Aim the protruding part at the bottom of the battery at the groove of the phone.
Push the top part of the battery to the phone and press down the lock until it is
locked.
2.3.2 Removing the battery
Switch off the phone, push up the lock at the top of the battery to uplift the top of
the battery and separate it with the main board.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3.3 Installing the RUIM card
Purchase
a
RUIM card from network operator. Your phone number and
registration information are stored in your RUIM card. Your RUIM card can be
used in any a CDMA phone. Your number and information will not change.
Make sure to switch off your phone before taking out the battery.
Make the metal face of the RUIM card down and put it conferring the level of
the card. Then install the battery.
2.3.4 Removing the RUIM card
Remove the battery after switching off your phone.
Remove the RUIM card.
Install the battery.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 Charging the Battery
The D1200P can be charged either when it is switched on or off.
1.Plug the charger transformer into a standard outlet.
2.Insert the charger output plug into charging connector of the bottom of the
phone.
3.The rolling of the electric quantity bar indicates that the phone begins to
charge.
4.When the battery level full and stop rolled, the phone will display 'Battery full'.
5.After charging is complete, switch off the electric supply and pull out the
charger's jack.
Note:
When the battery level is low and only a few minutes of talk time remain, a
beep is heard, the battery icon flashes and the phone displays 'Battery Low,
please recharge soon!'. When battery is drained completely, the phone
displays 'Battery too low, Power off soon!'
When the battery is completely discharged, your phone will turn off.
The battery can be charged whenever you want. However, using your phone
while charging can increase the charging time.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
It is recommended that you charge the battery for three hours (full charging
period) before you use it.
Do not pull out the plug of the charger during charging to avoid electrical
damage to the phone and the charger.
2.5 Headset
If you connect the headset with the phone, it will be to activate headset mode or
to match the volume of headset with that of mobile phone.
Increase or decrease the volume through up and down side key during call.
If you plug out the headset from the phone, the phone will return to normal
mode automatically.
2.6 Switching a Phone On/Off
Press and hold down the red key
If you switch the phone on and there is no RUIM card inserted, the phone
displays ' Please insert RUIM '. Press key to only dial emergency call.
to switch your phone on or off.
After inserted, the phone will check whether the RUIM card is valid.
Then the screen displays the following messages:
Enter PIN --- Request to input the RUIM card PIN code (if required).
Enter Lock code --- In idle mode, press
key to request to enter the phone
16
Download from Www.Somanuals.com. All Manuals Search And Download.
lock code (if required).
Note:
If the RUIM card is invalid, the phone displays 'RUIM card rejected', please
contact your network service provider.
In the instances above mentioned, press
key to only dial emergency call.
2.6.1 Entering your RUIM card PIN Code
You can set protection code (PIN CODE) in order to prevent random using of
your phone by others. Each time you restart your phone, the phone will prompt
you to enter PIN code (The default PIN is 1234). In this condition, press
to dial emergency call.
key
Input PIN code (supplied by network service provider. For security, an * will be
displayed on the screen to in place of the number you enter.)
If you make a wrong enter, you can press key to re-enter the code.
Press key, and after a short time, your mobile phone will confirm its
correctness and begin to register on the network. Once the network name is
shown on the screen, you can call or access any of the functions of your phone.
If no network name is shown on the screen, you may need to register again.
Note:
If you have entered the PIN code incorrectly continuously for max retry limits,
17
Download from Www.Somanuals.com. All Manuals Search And Download.
the RUIM card will be automatically locked. In this condition, the phone will
prompt for PUK (PIN Unlocking key). You can get the PUK from your mobile
phone service provider.
2.6.2 Entering your Phone Lock Code
The phone lock code is used to protect your phone from unauthorized use.
It can be set automatically to lock your phone each time it is switched on or
when in idle mode. In this condition, you can only dial emergency call.
You must press key to enter correct phone lock code, and then access the
phone menu (The default is 000000).
The PIN code and Phone lock code can be changed.
2.7 Dialling a number
To dial a number, your phone must be switched on and unlocked.
You can use the function only after the network-prompting icon is shown on the
screen.
2.7.1 Using the digits keys
Enter district code and telephone number or mobile phone number, press key
to dial.
Press
key to delete a typed number. Press and hold
key to delete all
18
Download from Www.Somanuals.com. All Manuals Search And Download.
numbers.
To indicate that you are dialling a number, the word Calling displays the
screen.
If the call is not answered and you want to end the call, press
key.
If the call is connecting, the display will change to In Call press
end the call.
key to
2.7.2 Dialling a number using the Recent Call List
The mobile phone can store no more than 30 latest call logs (incomings,
outgoings and missed calls).
1.In idle mode, press
2.Scroll the list by pressing the up/down navigation key and select an entry.
3.Press key to dial.
key to enter the recent calls list.
2.7.3 Dialling a number using the Contacts List
1.In idle mode, press down navigation key or press
list.
key to enter the contacts
2.Scroll the list by pressing the up/down navigation key and select an entry.
3.Press key to dial.
2.7.4 Dialling a number using Speed Dial
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Speed dial is a fast way to call one of your special numbers. See 'Speed dial'
menu.
2.7.5 Making an International call
Press and hold
Enter the country code, area code (without prefix zero) and phone number.
Press key to dial.
key until ‘+’ appears on screen.
2.7.6 Ending a call
You can end a call at any time by holding down the
terminated.
key till the call has been
2.8Receiving a call
When you receive a call, the phone will alert and the word 'Incoming call'
displays on the screen. If your phone has Caller Line Identification and the
calling party is in Contacts list, the caller's number and name also appears.
Press key or any key (need setting) to answer the call. Please refer to 'Any
key answer' menu.
Press
key twice to reject the incoming call.
2.9 During a phone call
After pressing
key, user can view following contents given below:
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2.9.1 Mute
Temporarily turns the microphone off during a phone call. Reselect this option to
resume your conversation.
2.9.2 Names
This function allows you to access the Names menu.
2.9.3 Menu
By using this feature, you can directly enter the menu list.
3. Menu overview
Your RUIM card can be used in the handset for accessing the menu options
detailed below. If the RUIM card is not inserted, you can still make SOS
(emergency) calls.
Press
key to enter the main menu option in idle mode. The main menu
consists of 9 icons. You can select any icon with navigation key and press key
to enter submenu.
Note: You can also directly press 1 to 9 to enter the corresponding submenu.
3.1 Messages
You can send, receive, save or erase the message by using messages menu.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1.1 Write message
Allow user to edit text message. When composing text messages, check the
number of characters allowed in the top right corner of the message. Per
message can contain up to 160 characters. If you cross the limit, the phone
prompts with a 'Sorry, No more space!' pop-up message.
Press numeric key to input corresponding characters.
Note: Press and hold
key to delete entire message and start a new one.
Press key to access the following Message options:
3.1.1.1 Send
After writing the message, press Send option to input the recipient's number or
retrieve a number from the Names list. Then select Send option to send the
message.
3.1.1.2 Insert templates
When composing an SMS message, you can use the Insert templates option,
scroll through a list of prewritten messages and select the one you want to insert
into your new text message.
3.1.1.3 Send to group
One message can be sent to a group included one or more people (no more
than 10).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
You can use the Send to group option, scroll through a list of groups and select
the one you want to send.
3.1.1.4 Insert number
When composing an SMS message, you can use the Insert number option,
scroll through names list and select the number you want to insert into your new
text message.
3.1.1.5 Save message
You can use the save message option to save the contents of edited to draft box.
3.1.2 Inbox
When you receive a new message, the new message-prompting icon will be
displayed on the LCD right corner.
Enter the inbox menu, the current message position and the total number of
received messages will be displayed at the first row of the screen. If there are
no messages, 'No message' will be displayed. If there are messages, the new
messages will be displayed first, followed by the old. Once you have read a new
message, it will become old.
You can press up/down navigation key to highlight the message you wish to
view.
The message icon is displayed. See 'Table [1]'.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
The sender's phone number is displayed. When the sender's phone number is
stored in the contacts list, the sender's name is displayed instead of the phone
number.
Press
key to display the whole message details, the message contents,
the phone number who sent it and when it was received. Here pressing key
allows you to call the sender.
Table [1]: The message icons in Inbox
24
Download from Www.Somanuals.com. All Manuals Search And Download.
From the message view, you can choose to access the following options:
3.1.2.1 Reply
You can reply to the sender after opening the received message.
3.1.2.2 Forward
You can forward the received message to desired number.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1.2.3 Use number
If the Numbers available haven't been stored into the contacts list, you can save
it.
If the number has been stored into the contacts list, the phone displayed 'This
number already exists'.
3.1.2.4 Erase
Allow you to erase the selected message.
3.1.2.5 Connect URL
this network.
3.1.3 Outbox
You may store sent messages and unsent messages to an outbox list according
the MSG Settings. You can retrieve these messages and forward them to other
contacts, or resend the message, or erase the message if it is no longer
required. Erasing messages from the outbox can free up additional memory on
your phone.
3.1.4 Draft
You may store saved messages to a draft list. You can retrieve these messages
and send them to any contact or erase the message if it is no longer required.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing messages from the Draftbox can free up additional memory on your
phone.
3.1.5 Voice mail
If you subscribe to voice mail, your service provider will furnish you with a voice
mailbox number. You need to save this number to your phone to use voice mail.
By setting the call forwarding function, the incoming call is forwarded to your
voice mail.
When you receive a voice message, your phone starts beeping or displays a
message, or both. If you receive more than one message, your phone shows
the number of messages received.
Listening to voice messages, the user needs to press and hold the key 1
(Default speed dial for Key 1 is Voice mail).
Note: This function needs to be supported by your network
3.1.6 Templates
You can set no more than 21 quick texts, in which 9 quick texts are by default
other 12 quick texts can be edited by user.
Press up/down navigation key to scroll the desired message and press
to access the following options:
Edit: Allow you to modify the text and then save it.
key
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Erase: Erase the selected quick text.
Add new: Enter the text-editing interface and then save it.
Send: You can send the selected quick text.
3.1.7Msg groups
You can set no more than 5 groups, and you can add the member from the
phone memory and the RUIM card memory names to any group.
By pressing
3.1.7.1 Send
Allow you to write a new message and send directly to all members of the
key you may enter the following menus:
selected group.
3.1.7.2 View
Allow you to view the name list of the group. By pressing
key, you can add a
member, send message to the selected member, send to all members of the
group, replace the selected number with another number, remove the selected
member, or clear the group.
3.1.7.3 Rename
You can change a group name into a wanted name.
3.1.7.4 Clear group
You can clear the members of the selected group.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1.7.4 Clear all groups
You can clear the members of all groups.
3.1.8 Erase msgs
Access the Erase messages option to specify exactly which type of message
you want to erase.
By selecting Inbox, you can erase messages from the inbox folder.
By selecting Outbox, you can erase messages from the outbox folder.
By selecting Draft, you can erase all the messages in the draft folder.
By selecting Erase all read messages, you can erase all the read messages.
By selecting Erase all, you can quickly erase all messages stored in your phone
and RUIM card memory.
3.1.9 Settings
You can change the message settings in this menu.
3.1.9.1 Auto save
Allow you to select 'On' or 'Off' option. If you select 'On' option, your phone will
save the sent or unsent messages in the Outbox (subject to memory available).
3.1.9.2 Auto delete
Allow you to select 'On' or 'Off' option. If you select 'On' option, the oldest
message is deleted automatically when the memory becomes full.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1.9.3 Deferred delivery
Allow you to select 'Immediate', 'After 1hr', 'After 5hr' or 'After 1day' option. You
can choose the time when you want your message to be delivered.
Note: This function is depended on the service provider's network.
3.1.9.4 Priority
The function allows you to select Normal, Urgent or Emergency.
3.1.9.5 Validity period
Allow you to select 'Default', '30 minutes', '1 hour', '2 hours', '12 hours', '1 day', '2
days', '3 days' options. You can set the validity period for your messages, that is,
how long they should be available to the receiver.
3.1.9.6 Voice mailbox
The function allows you to edit or save the voice mailbox number.
3.1.9.7 Broadcast
Allow you to select 'On' or 'Off' option. If you select 'On' option, you can receive
broadcasted messages. Service providers usually advertise to all subscribers on
new schemes, tariffs, or special offers through broadcasted messages.
3.1.9.8 Delivery report
You can choose On or Off to set the status of the message you have sent, if you
select On, the information that you have successfully sent the message is
30
Download from Www.Somanuals.com. All Manuals Search And Download.
displayed through network.
Note: The network determines whether this function is effective or not.
3.1.9.9 Storage device
You can select storage device in which the SMS can be stored in RUIM, phone,
RUIM and phone.
3.1.9.10 Send default message
Allow you to select 'On' or 'Off' option. If you select 'On' option, the default
message will be automatically sent to the caller's phone number when you
ignore the incoming call.
3.1.9.11 Default message
By default its contents are 'I'm busy. Please call me after some time.' You can
edit it.
3.1.10 Memory status
You can view the SMS memory status of the phone and RUIM card memory,
including total memories and free memories.
3.2 Call history
Call register stores information about the last 30 calls (including missed,
received, and dialled). Calls are marked with different icons indicating
31
Download from Www.Somanuals.com. All Manuals Search And Download.
missed/received/dialled calls.
3.2.1 Missed calls
With this function, you can view and erase no more than the last 30 missed calls
you have received. You can also send a message to any missed call. See
'Detailed call records'.
3.2.2 Received calls
With this function, you can view and erase no more than the last 30 incoming
calls. You can also send a message to any received call. See 'Detailed call
records'.
3.2.3 Dialled calls
With this function, you can view and erase no more than the last 30 dialled calls.
You can also send a message to any dialled call. See 'Detailed call records'.
Detailed call records as following:
Details
You can view the selected call record details:
Missed call: To view when it was missed and the phone number who dialled it.
Received call: To view when it was received, call duration and the phone
number who dialled it.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialled call: To view when it was dialled, call duration and the phone number
who received it.
If the selected phone number cannot be stored in the contacts list, you can
press to save it,otherwise just view it.
Send message
You can send message to the available number.
call
You can call the available number.
Erase
You can erase the selected call record.
Erase all
This function can be used to erase all the missed/received /dialled calls history.
3.2.4 Erase history
You can erase the all Call History with this menu.
3.2.5 Call duration
This function allows you to display the duration of your last call, total received
call, total dialled call and life time, and also to reset your time counter to zero.
3.2.5.1 Last call
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone displays the time used by the last call since the counter was reset.
3.2.5.2 Total received calls
Phone displays the time used by received calls since the counter was reset.
3.2.5.3 Total dialled calls
Phone displays the time used by dialled calls since the counter was reset.
3.2.5.4 Reset all
You can reset the counter of the calls timer to zero.
3.2.5.5 Life time
Phone displays the total duration used by all calls and the total number of calls
since the counter was reset.
3.3 Profiles
The profiles function provides a quick and convenient way to reset your mobile
phone setting for a particular environment (e.g. to set your mobile for not ringing
when you are in a meeting, or increasing the volume of the ring tone when
outside). Each profile has a factory default, however you can adjust each profile
to suit your requirements.
How to activate a profile
1. Press
key to access the profile function.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press up/down key to highlight the profile you wish to activate, then press
key to enter.
3. Press up/down key to highlight the 'Select profile' option, then press
activate.
key to
Note: For short access to the profile mode press up navigation key in idle mode.
When a profile is set, the icon which corresponds to the profile name is
displayed on idle screen.
How to customize a profile
1.Press
key to access the profile function.
2.Press up/down key to highlight the profile you wish to customize, then press
key to enter.
3.Press up/down key to highlight the 'Edit profile' option, then press
select.
key to
4.Press up/down key to highlight the setting you wish to customize, then press
key to select.
5.Edit the desired setting.
For details about settings, see 'Edit profile'.
6. After finishing it, press
3.3.1 Vibrate only
to save the modifications.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
By pressing
3.3.2 Silent
Select profile: if you need a quiet environment, you can activate the silent option
key, you can activate the vibrate only option of the profile.
of the profile.
Edit profile: According to the quiet environment, you can customize the profile
mode.
See 'Edit profile'.
3.3.3 General
Select profile: you can set the profile available as general.
Edit profile: According to the ambience, you can customize the profile mode.
See 'Edit profile'.
3.3.4 Outdoor
Select profile: if you are away from home, activate the available outdoor mode
Edit profile: According to the outside environment, you can customize the profile
mode.
See 'Edit profile'.
3.3.5 Meeting
Select profile: if you are in a meeting, you can activate a meeting mode of the
36
Download from Www.Somanuals.com. All Manuals Search And Download.
profile.
Edit profile: According to the meeting environment, you can customize the profile
mode.
See 'Edit profile'.
The default setting is the vibrator mode.
3.3.6 Headset
Select profile: if you insert the headset, you can activate to the headset mode
immediately.
Edit profile: According to the ambience, you can customize the profile mode.
See 'Edit profile'.
Edit profile as following:
Ring type
The incoming call ringer types have: Ringer, Vibration, Vibr. then ring, Silence,
Vibr and Ring and One beep.
Ring Tone
You can allocate the incoming call ringer from 15 tones for no group's number.
The ringer of the group's number setting is available under the phonebook
groups setting state.
Ringer volume
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Allow you to adjust the volume of the Ringer.
Earpiece volume
Allow you to adjust the volume of the earpiece.
Key volume
Allow you to adjust the volume of the key.
Message alert
The message alert types have: Vibrate, Silence, Two beeps, Four beeps and
Ring.
You can select different new SMS ringer formats. The phone provides 5 SMS
Ringers.
Alerts
You can Change the status of alerts detailed below:
Service change
When the alert for Service Change is on, it means that every time your phone
loses service, or changes from its carrier to a different carrier, an alert will be
sounded.
Minute beep
When the alert for Minute beep is on, during a phone call, as your connection
nears a minute, an alert will be sounded 10 seconds before every minute. This is
38
Download from Www.Somanuals.com. All Manuals Search And Download.
to help the user know how many minutes have gone by while they are talking (if
conversation is short).
Call connect alert
When a call has successfully connected, an alert will sound.
Call end
When a call has successfully ended (either by you or because the call is
dropped), an alert will sound.
Fail on outgoing
When alert for fail on outgoing is on, phone sounds an alert after failing on
outgoing.
Charger beep
When the alert for Charge beep is on, every time your phone is connected or
disconnected to the charger, an alert will sound.
Auto answer
A unique feature of the phone is the ability to answer an incoming call
automatically after that time you set. Only headset mode has this feature.
Selecting 'Off' shuts off the auto answer function
Selecting 'After 5sec' will automatically answer the incoming call after 5sec.
Selecting 'After 10sec' will automatically answer the incoming call after 10sec.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Settings
Settings allow you to customize your phone as per your preferences.
3.4.1 Display
You can customize your display by creating a banner, adjusting the backlight,
adjusting LCD contrast, selecting theme color, setting clock to show or hide,
selecting the language, selecting the wallpaper, selecting the menu style.
3.4.1.1 Banner
You can set the greeting message which will appear in idle screen.
15 characters can be stored as a greeting message.
3.4.1.2 Backlight:
You can specify the duration of the backlight.
The phone provides 4 timers (7 Seconds, 15 Seconds, 30 Seconds and Always
on) to allow you to select.
3.4.1.3 Contrast
You can adjust LCD contrast from 0 ~ 9 level.
3.4.1.4 Theme colors
Allow you to select display background light color.
3.4.1.5 Clock
40
Download from Www.Somanuals.com. All Manuals Search And Download.
You can set the clock whether show on the idle screen or not.
3.4.1.6 Language
Allow you to set the displayed languages.
3.4.1.7 Wallpaper
Allow you to set the wallpaper displayed on idle screen.
The phone provides 6 kinds of paper.
3.4.1.8 Menu style
You can select different style of the function.
The phone provides 3 styles (Under water, Pane, Grid).
3.4.2 Phone
3.4.2.1 Keyguard
This function allows you to lock the keypad when phone is not in use. You can
also customize keypad lock time in minutes.
3.4.2.2 Key tone
Allow you to select the key tone mode: Normal (the prolonged sound and the
brief sound are fixed.), Long (when you are pressing the key, the key tone is
alerted until un-pressing).
3.4.2.3 Version
You can view the SW/HW/PRL version number by using this menu.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4.3 Security
Security menu protects your phone from unauthorized use. Before accessing
this option, you will be asked to enter lock code (The default is 000000).
3.4.3.1 Lock mode
This option is used to set the lock code.
The lock code can be set to protect your phone from unauthorized use. It can be
set to automatically lock your phone each time it is switched on or is in idle
mode.
The lock code is a six digit number which is set at 000000. This can be changed
at any time by using the 'change lock code' option.
Off
This option can be used to set the lock code disable.
Now
This option can be used to immediately lock your phone. Once selected, your
phone will be unusable until the phone lock code is entered.
On power up
This option can be used to automatically lock your phone each time it is
switched on.
3.4.3.2 Change lock code
42
Download from Www.Somanuals.com. All Manuals Search And Download.
This option is used to change the lock code.
After selecting this option, you will be asked to enter new lock code to replace
the old code. The new lock code must be entered again as confirmation.
3.4.3.3 Reset
Allow you to restore your phone to the factory settings.
3.4.3.4 PIN Management
This option is used to set and change the PIN code.
The PIN code can be set to protect your RUIM card from unauthorized use. If
set to Enable PIN, access to your RUIM card will be restricted each time the
phone is powered on.
Enable PIN
If user enables the PIN, the Phone will ask for PIN each time it is switched on.
By default the RUIM PIN is 1234.
Disable PIN
This option can be used to set the PIN disable.
Change PIN
This option is used to change the RUIM card PIN code.
The ' PIN Management ' option must be set to Enable PIN and you must enter
the old PIN code before you can proceed.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
The phone will ask for enter a new 4~8 digits code to replace the old PIN code.
The new PIN code must be entered again as confirmation.
3.4.3.5 Call restriction
With the Call restriction, you will be asked to enter password before accessing
the particular restricted option (The default is 000000).
This function includes the following options:
Dialled
If it is set to 'Yes', all outgoing calls except emergency calls will be prohibited.
Received
If it is set to 'Yes', all incoming calls will be restricted to answer.
Phone book
If it is set to 'Yes', before accessing the Names menu, you will be asked for
entering password.
Password setting
Default password is 000000, but user can change it by using this feature.
3.5 Call setup
The function allows you to set related to calls.
3.5.1 Call forward
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Call forward is a network service.
This service is used to forward incoming calls to your voice mail system or to
another number depending on certain conditions in which your phone is
unavailable or you don't want to receive any call.
3.5.1.1 Unconditional
This function will unconditionally forward all incoming calls to voice mail or other
number.
3.5.1.2 When busy
This option will forward incoming calls when you are on a call.
3.5.1.3 Not reply/Not reachable
This function will forward incoming calls if you don't answer the call or your
phone is out of network service or switched off.
3.5.2 Call waiting
If your mobile phone service provider supports this feature, the call waiting
notifies you of an incoming call even while you are on a call. You can accept,
reject, or ignore the incoming call.
The Call Waiting function needs to be supported by your network service
provider.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5.3 Any key answer
If it is set to on, it allows you to answer an incoming call by briefly pressing any
key except the Power key and Volume side key.
3.5.4 Auto redial
If it is set to on, it allows you to automatically redial the number if the first
attempt was unsuccessful.
3.5.5 Voice privacy
Voice Privacy is a network service. If your wireless service provider supports this
feature, the voice privacy feature protects the privacy of your current phone
conversation from other callers placing phone calls on your same network. By
default Voice Privacy is set on Standard Mode.
3.5.6 International call prefix
By using this function, you can set the local international dialling prefix code
If you set the prefix code by hand, when dial a number with prefix code '+', '+'
will automatically change into code you input.
3.5.7 Show call time
This function includes 'Hide' and 'Show' options. If it can be set to 'Show', the
phone displays the duration of the current call.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 Tools
3.6.1 Scheduler
You can use the scheduler function to set reminder/alerts for various events,
meetings and more.
The time entry is available in a 12-hour format only.
3.6.1.1 Add new
You can set date on the calendar. Inputting the information to the phone and
then add alarm clock time.
Note: If the alarm time can be set to past time, the phone displays 'Failed! The
time should be later than now'.
3.6.1.2 List all
Allow you to View/Edit/Erase the entries list of schedule as per their time
sequence.
3.6.1.3 Erase all
This function can be used to erase the whole entry lists.
3.6.2 Alarm clock
The alarm clock is based on the phone clock. It sounds an alert any time you
want. This function supports three alarm clocks and a quick speed alarm clock.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6.2.1 Quick alarm
The quick alarm clock can set different alarm times ‘After 10min’,‘After 30min’,
‘After 1h’, ‘After 3h’, ‘Off’. The alarm can't be used when the mobile is power off.
3.6.2.2 Snooze mode
Off
It can be set to turn off the alarm completely by pressing any key when the
alarm wakes up.
10 minutes/15 minutes/20 Minutes
When the alarm goes off, select Snooze to postpone the alarm for 10/15/20
minutes.
3.6.3 Calculator
The calculator function performs the 4 arithmetic calculations using up to 12
digits, addition (+), subtraction (-), multiplication ( ), and division ( ).
1.Press key to display the calculator main interface.
2.Key operations for calculation are as follows:
Enter the first number. Press number key to input the number, press key to
key for a negative sign. Then select the
input the decimal point and the
operation by pressing one of the four direction keys. Input the second number
after that.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
To clear the entered number or operand, press key [Erase].
To calculate the result, press key [Result] or press key [=].
3.If you wish to start a new calculation, press
4.If you close the calculator function, press
key [Reset].
key [Back].
Note: For a limited degree of accuracy, this function should only be used for
reference.
3.6.4 Tip calculator
This function allows you to quickly calculator the tip along with bill amount as
well as an option to split the total bill.
3.6.5 World clock
User can view the timing of different cities in the world.
Jakarta Time is save as default. Press up and down navigation key for viewing
the timings of other cities.
3.6.6 Stop watch
After entering the stopwatch main interface, the phone displays the starting time
00:00:0, press
timing, press
[Reset] to return to the stopwatch main interface.
key [Start] to start timing. Here press
key [Pause] to pause
key
key [Resume] again to continue timing, and that press
49
Download from Www.Somanuals.com. All Manuals Search And Download.
In the process of the timing, press
lap.
key [Split] every time you need to count a
Press up/down navigation key to look over the former records.
Note: For the limited degree of accuracy, this function should only be used for
reference.
3.6.7 Game
3.6.7.1 Kong ming
If you have saved the former game record, you can choose, start or resume
game, or select game to start it again.
Instructions
Use up /2, down /8, left /4 and right /6 to control the cursor. Use 5 to select a
chessman. When chessman X moves over chessman Y next to it, Y is erased
from the chessboard. Only one chessman can be erased at one time. Player
wins if there is only one chessman left in the center of the chessboard.
3.7 Haier feature
3.7.1 Menu Items Lock Code
The user can protect important information in the mobile from use by others.
It can be set to enter the Lock Code before opening the particular locked menu
50
Download from Www.Somanuals.com. All Manuals Search And Download.
phone. The default lock code is 000000, but user can change the password in
security menu.
The information includes Messages, Contacts, Call history, Alarm clock and
Scheduler. Select any of the information and press
the following options:
key, allows you to access
Enable
Press
key to validate making tick in checkbox. Press key again to cancel
this operation, the checkbox becomes blank again.
Enable All
Press key to validate making tick in all checkbox.
Disable All
Press
key to validate that all the tick in checkbox be canceled.
3.7.2 Incoming Call Guard
This function is used for screening incoming call. In simple words, your phone
can restrict the callers after saving the mobile numbers in the lists explained
below.
3.7.2.1 Black List
User can save 10 phone numbers in black list. The listed numbers cannot
connect to user's phone number.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
1.Press key to enter the black number list.
2.Select any one of records and press
key, the phone displays the following
options:
Edit
Allow you to modify the black number or search from contacts to add. After that
press key to select Ok option to confirm.
Erase One
Allow you to erase the selected black number.
Erase All
By using this function, you can erase all black numbers.
3.7.2.2 White List
User can save 10 phone numbers in white list. Only the listed numbers can
connect to user's phone number. The detailed operation refers to 'Black List'
menu.
3.7.2.3 Setting
With this menu user can activate the Black / White list phone numbers or cancel
both of them. Those three things are not available in the same time; only one
thing can be used in one time.
Note: User needs to activate the Black/White list in the guard setting otherwise
52
Download from Www.Somanuals.com. All Manuals Search And Download.
the Incoming Call Guard will not work.
3.8 My Menu
3.8.1 WAP
Your phone supports WAP 2.0. You can use this facility to connect to selected
services on the mobile Internet.
This menu option allows you to download a host of exciting content with WAP
browser.
Simply browse on the web page and download from
a
wide selection of
Ringtones, Wallpapers, and other applications such as BSE Stock Portfolio
tracker, Faith and many more.
For short access to WAP menu, you can directly press
3.8.1.1 Homepage
key in idle mode.
telecom.co.id/’.
3.8.1.2 History
List of the previously visited sites.
3.8.1.3 Bookmark
List of the preset website.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
New Bookmark
You can write and save the new bookmark.
New Folder
You can create new folder to save bookmark.
3.8.1.4 PHSH messages
List of PUSH messages received.
3.8.1.5 Advanced
By pressing
Open URL
key, you can access the following options:
You can input web page address of a site you want to visit and press 'OK' to
connect.
Page Folder
You can create no more than 16 folders to save web page.
Sound Folder
List of sound you download from mobile Internet sites.
(Support sound format: Mid)
Image Folder
List of image you download from mobile Internet sites.
(Support image format: Jpeg, Bmp, Wbmp, Png)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Option
You can customize these options in this menu.
Clear Cookies
Clear history record of browsed web pages.
Set Background Music
You can set the background music whether open or not while browsing web
page.
Setting
You can change some settings in this menu.
Set Gateway
You can set gateway as per your preferences. 'Gateway 1' is the default and you
can't edit. The default preferences are IP(10.17.27.250), port(8080),dial(#777),
user name(wap), and password (wap).
Select Gateway
You can select one gateway as your demand.
Restore Setting
You can restore your phone to the default settings.
Help
Key Operation: Up/Down
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Arrow: scroll display and switch focus;
Left Arrow:go forward;
Right Arrow: back;
Select Key: OK;
Left/Right Softkey: correspond to display;
Send Key: interrupt the downloading;
Keep Pressing * key: page up;
Keep Pressing # key: page down;
About
Information of WAP you use.
3.8.1.6 Exit Browser
Stop the connection to the network and return to the upper menu.
Note: For relevant charge standard and detailed setup, please consult local
network service operator.
3.8.2 SMS Service
Only your RUIM card supports those kind of function, you can use it. Different
RUIM cards are vary in menu name and content.
3.9 Gallery
56
Download from Www.Somanuals.com. All Manuals Search And Download.
In this menu user can view downloaded images, music ring tones and available
memory status for WAP etc.
3.9.1 Picture
You can download images from mobile Internet sites and manage them.
3.9.2 Music
The function allows you to download music from mobile Internet sites, and then
to manage them.
3.9.3 Other
The user can download other information from mobile Internet sites.
3.9.4 Memory status
The function helps you to check the Used memory, Free memory and Total
memory.
3.9.5 Sort setting
3.9.5.1 Sort by…
You can sort the images, music and others downloaded from mobile Internet
sites by name or size.
By sorting them, you choose the order that you want the information to be
displayed on the screen.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
3.9.5.2 Ascend/Descend
You can sort the information downloaded from mobile Internet by Ascend or
Descend.
3.10 Names
You can store names and phone numbers in your phone or RUIM card memory.
In idle mode, press
to access the names function.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
3.10.1 List
You can use this function to search records, to dial directly, to execute erase,
copy or send a message and to edit operations.
Press
key to enter the names list.
If you need to browse phonebook's information, input the alignment characters,
your mobile phone will then attempt to match the characters with the names in
59
Download from Www.Somanuals.com. All Manuals Search And Download.
your Phonebook.
Once the number you prefer is displayed, you can press
number.
key to call this
Select any record and press
3.10.1.1 Details
key to access the following functions:
In a contacts list, you can view the following items:
Items stored in the phone memory
Name: Up to 14 characters
Number: Up to 20 digits, 3 phone numbers
Address: Up to 150 characters
Email: Up to 64 characters
URL: Up to 150 characters
Note: Up to 250 characters
Group: You can allocate the selected name to any group.
Default: You can customize specific ring tones for incoming call from the name's
numbers.
Items stored in the RUIM Card
Name: Up to 14 characters
Number: Up to 20 digits
60
Download from Www.Somanuals.com. All Manuals Search And Download.
For details operations please refer to 'Details Submenus'.
Details Submenus function as following:
Send Message: Allow you to send the message to the selected number.
Erase: You can erase the desired entries.
Edit: You can edit the saved number, name and group.
3.10.1.2 Find
You can search a phone number from the phone book names. Please refer to
'Find' menu.
3.10.1.3 Erase
You can erase selected record.
3.10.1.4 Copy
You can copy all RUIM card memory entries to phone memory, or copy all
phone memory entries to RUIM card.
3.10.1.5 Erase all
You can erase all records.
3.10.2 Add new
With the Add new function, you can choose either the phone or RUIM card
memory to store the new item.
Phone memory capacity is 200 items. RUIM card memory depends on the
61
Download from Www.Somanuals.com. All Manuals Search And Download.
network service providers.
If you add a new item to the phone memory, you need to enter one of the
following: Phone Number, Address, Email, URL and Note, and you can select a
group and ring tone for incoming call. If you add a new item to RUIM card, you
need to enter: Phone Number .
3.10.3 Find
This function is used to search a phone number from the phone book names.
You can search by name, number or group. If there are no entries in the phone
book, the screen will display 'No record in phonebook!'. If there isn't any name
matching your entry, the screen will display 'No match found!'
3.10.3.1 Find name
Input the name or the first character required to begin search.
3.10.3.2 Find number
Input the full number or several digits included by your number you want to
search.
3.10.3.3 Find group
You can select the group you want to search.
3.10.4 Multicopy
62
Download from Www.Somanuals.com. All Manuals Search And Download.
With the copy function, you can copy items stored in RUIM card memory to
phone memory. and vice versa.
3.10.4.1 All Copy
Allow you to copy all of the RUIM card memory entries to phone memory and
vice versa.
3.10.4.2 Choice Copy
You can selectively copy the record. You can select one or more of the entries
key to view
from the names list to copy it. After selecting an entry, press
options as below:
Select / Unselect
Press key to validate making tick in checkbox. Press
this operation, the checkbox becomes blank again.
key again to cancel
Cancel all
Press
key to validate that all the ticks in checkbox be canceled.
Select all
Press
Copy
key to validate making ticks in all checkbox.
Press key and then the phone displays the confirmation, asking you if you
wish to copy or not. Press key to confirm copy.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: :
: The icon indicates that the names list has been selected.
3.10.5 Groups
Your mobile phone provides 9 groups in which 7 groups are by default other 2
groups can be added. There are seven groups, including No group, Family,
Friends, Colleagues, VIP, Business and Personal.
You can allocate the phone memory and the RUIM card memory names to
specific groups.
By pressing key you may enter the following menus:
3.10.5.1 View group
Allow you to search the needed numbers or other information in the group,
press
Note: If there are no members in the group, press
key to manage your groups after searching.
key then the phone will
key to enter
display 'No members, add new member?'. At this time press
the names list, you can add a record to the specific group.
3.10.5.2 Set ring tone
You can customize specific ring tones for Incoming Calls.
The phone provides 15 ringers to allow you to select.
3.10.5.3 Add group name
64
Download from Www.Somanuals.com. All Manuals Search And Download.
You can add two new group names to the phone.
3.10.6 Erase all
Before accessing this option, you will be asked to enter lock code (the default is
000000). This feature allows complete erasing of all contacts either in RUIM
card memory or Phone memory; the information thus deleted is unrecoverable.
3.10.7 Speed dial
Speed dial is a fast way to call one of your special numbers.
Your mobile phone has 99 speed dial entries in which the first one are by default.
Each speed dial entry can be edited by user.
To dial Speed dial number
Speed Dial Keys from 1 to 9 Press and Hold the number key , automatically
it will dial the corresponding number.
Speed Dial keys from 10 to 99 Type the numbers along with
press key. (E.g. Speed dial 11th entry. Type 11# and press dial key.)
key and
Default Speed Dial Numbers are:
1=Voice Mail (*777)
3.10.8 Memory status
This function helps you to check the number of entries stored in the names lists.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
You can check the memory status of the RUIM card and phone memory,
including free memories and total memories.
4. Input method
This mobile phone uses the eZi input Method. When using your mobile phone
there will be many times that you will need to input text e.g. sending messages,
entering names into the Phonebook, editing the greetings message, etc.
Under the input mode, press key to switch the input mode.
The phone provides the following methods:
4.1 Number (123)
This input method can be used to enter digits.
1.In text editing mode, press
top-right corner of the screen.
2.Press the numeric keys to input numbers.
key several times until '123' is displayed at the
4.2 Character (Abc/abc/ABC)
Using the character input method, you can enter uppercase and lowercase
letters, and you can press and hold the numeric keys (2~9) to input numbers
directly.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
1.Tap the
key several times until 'Abc' is displayed in the top-right corner of
the screen, then you can type the first letter in uppercase. When you have typed
the first letter, 'Abc' will be changed to 'abc' automatically.
2.Tap the key several times until 'abc' is displayed in the top-right corner of
the screen, then you can type in lowercase letters.
3.Tap the
key several times until 'ABC' is displayed in the top-right corner of
the screen, then you can type in uppercase letters.
4.Press desired number key, once to input a character, twice to display the
second character, by analogy to finish the text.
4.3 en/En
1.The 'in' option allows you to type predictive text in Indonesian with all letters in
lowercase.
2.The 'In' option allows you to type predictive text in Indonesian with the first
letter in uppercase.
3.The 'en' option allows you to type predictive text in English with all letters in
lowercase.
4.The 'En' option allows you to type predictive text in English with the first letter
in uppercase.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
The following steps show how to write a text by using these input methods:
1.In text-editing mode, tap
right corner of the screen.
key several times until 'En' is displayed at the top-
2.Press each key once, even when the letter you required is not the first letter
on the key. For example, to enter the word 'Mary', press 6,2,7,9 key.
3.During inputting, you can press
key.
4.Press 0 key to add a space.
key, then press the corresponding number
4.4 Entering symbols
1.Press the
key to enter the special character library.
2.Press up/down navigation key to select the symbol you need.
3.Press the corresponding number key.
5.USB windows device driver installation guide
5.1 Introduction
This document is a user guide for USB Windows device driver installation
process. The USB Windows device driver provides the interface between the
operating system and Haier D1200P handsets, allowing user applications to
68
Download from Www.Somanuals.com. All Manuals Search And Download.
communicate with devices. This installation guide is intended to provide a
detailed description of the USB Windows device driver installation process.
We will supply an accessory CD including this driver.
5.2 Components
Upon successful completion of the installation process, the following files will be
located in the specified directories folders:
C:\Program Files\VIA Telecom\VIA CBP USB Driver\*.inf:
ViaUsbEts.inf
ViaUsbHub.inf
ViaUsbModem.inf
C:\Program Files\VIA Telecom\VIA CBP USB Driver\*.sys:
ViaUsbEts.sys
ViaUsbModem.sys
C:\Program Files\VIA Telecom\VIA CBP USB Driver\*.PDF:
ctm_via_usb_drv_installation_user_guide_8_A.PDF
5.3 Installation
You must close all firewalls and anti-virus software before installing the USB
driver.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
1.To install the USB Windows device driver, you must first start the Setup
application, ViaUsb_Setup.exe, by double-clicking the associated icon.
Figure 1-USB Windows Device Driver Setup Icon
2. The USB Windows Device Driver Setup Welcome dialog box will appear.
Figure 2-USB Windows Device Driver Setup Welcome Dialog Box
70
Download from Www.Somanuals.com. All Manuals Search And Download.
3.Click the Next button to continue.
The License Agreement dialog box appears.
Figure 3-USB License Agreement Dialog Box
4. To continue, you must accept the License Agreement by clicking the Yes
button. If you select the No button, the following dialog box will appear,
confirming whether you truly wish to terminate the installation process at this
time.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 4-USB Windows Device Driver Setup Process Termination
Confirmation Dialog Box
If you select the Yes button, the installation process is terminated. If you select
the No button, the License Agreement dialog box (Figure 3) will reappear.
Upon agreeing to the License Agreement (Figure 3), the Customer Information
Request Dialog Box will appear.
Figure 5-USB Setup Customer Information Request Dialog Box
5.Please enter the appropriate user and company name into the corresponding
fields. By clicking the Next button, you will proceed to the actual installation of
the USB Windows Device Driver support files into their appropriate folders.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
The USB Installation Status Message dialog box will then appear indicating what
percentage of the file copying task is complete.
Figure 6-USB Driver Installation Operation Status Message
Upon completion of this step, the following message box appears.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 7-USB Device- Discovery Action Request Message
6. Click OK and connect the PC and the phone using the USB cable that we
supplied. Then the following message box will only appear for a very short
period of time, followed by the Window Hardware Installation Wizard's Device-
Found Notification for the USB Hub, the USB ETS device, and the USB Modem
device. The discovery, installation, and registration will complete automatically.
Figure 8-Windows Device Manager's Device-Discovery Notification for the
USB Hub/ETS/Moderm
In the end, a prompt (Figure 9) will appear on the screen. The USB driver
installation will then complete.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 9-Windows Device Manager's Device Discovery Notification for the
CBP USB Modem Device
7. An examination of the Windows Device Manager's device list (as depicted in
Figure 10) will evidence the successful installation of the USB devices, namely:
VIA Telecom USB Hub Device
VIA Telecom ETS Device
VIA Telecom CBP USB Modem
Figure 10-Windows Device Manger's Device List After Successful
Installation of the VIA USB Devices
Note:
75
Download from Www.Somanuals.com. All Manuals Search And Download.
This USB driver just supports windows 2000 and windows XP operating
system.
If the 'Digital Signature Not Found' dialog box (like Figure 11) appears,
you need only click the Yes button.
Figure 11-Windows Device Manager's Device-Discovery Notification that
the CBP USB Modem Device- Driver Lacks WHQL Certification
6. Modem installation guide
You can dial-up to the network by considing the phone as modem after
connecting the PC and the phone.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Connect the PC and the phone using the cable that we supplied.
2. Add a new windows standard modem driver, i.e.
Install process:
Enter Control panel
Enter Add/remove a hardware
Enter add a new device
Install a new modem
Choose a modem driver
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommend:
Standard 56000 bps v90 modem for windows 2000
Standard 33600 bps modem for windows XP
3. Make a new dial-up connection
Enter Network and Dial-up Connections
Make new connection
Click Next as follow
4. Dial-up to the network
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Dial-up directly for windows XP
You will be asked to enter the user and password when log on for windows 2000.
You can get the user and password from your mobile phone service provider.
7. Frequently asked questions (FAQ)
Here you will find answers to questions that you may have about your Haier
D1200P mobile phone.
Q. What is my Security Code?
A. The Default Security code is 000000. However, it is suggested that you
change this code immediately. Certain features can be used only after the
correct security code has been successfully entered.
Q. How do I change the Security Code?
A. Settings Security
Change lock code
remember easily) Confirm Lock code Ok
Enter Lock code (By Default lock code is 000000)
Enter Lock code (enter any code which you are able to
Q. What is the RUIM Lock?
A. The RUIM lock code enables you to lock your RUIM card, thus preventing
someone else from using it. The Default RUIM Lock is 1234, However, it is
79
Download from Www.Somanuals.com. All Manuals Search And Download.
suggested that you change this code immediately.
Q. How to change the RUIM Lock?
A. Settings Security Enter Lock code (By Default lock code is 000000) PIN
Management Change PIN Enter old PIN (By Default PIN is 1234)
new PIN Repeat new PIN Ok
Q. How to enable RUIM Card Lock?
Enter
A. Settings Security Enter Lock code(By Default lock code is 000000) PIN
Management Enable PIN Enter PIN (By Default PIN is 1234) Ok
Q. How to disable the RUIM Lock?
A. Settings Security Enter Lock code (By Default lock code is 000000) PIN
Management Disable PIN Enter PIN (By Default PIN is 1234) Ok
Q. How do I increase the volume of the phone ringer?
A. Profiles select any mode Edit profile Ringer volume select High
Q. How do I change the ringing tone?
A. Profiles select any mode Edit profile Ring tone select any music Ok
Q. How do I view the last dialled numbers?
A. Press the call key to select the last dialled call.
Q. How do I assign a key to speed dialling?
A. Names Speed dial Options Set entry Select number from names lists
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Ok
Q. How do I reset my phone's call timer?
A. Call History Call duration Reset all Ok
Q. How do I find my phone's ESN (electronic serial number)?
A. Turn off your phone. Remove the battery from the back of the phone. Your
phone's ESN number is printed on the sticker that is pasted on the rear cover,
and is labelled ‘ESN.’
Q. How do I find out how much memory the phone has?
A. Names Memory status Ok
Q. How do I call my voice mailbox number (Retrieve voice messages)?
A. When your phone alerts you to new voice messages, press and hold down
the 1 key. Follow the phone instructions to listen to your voice mail.
8.Trouble shooting
If there are troubles when using your phone, please refer to the following table. If
there are still questions, please dial Haier service telephone to solve.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
|