Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © 2009, Adobe Systems Incorporated.
Copyright © 2009, Macromedia Netherlands, B.V.
Google and Google Maps are trademarks of Google, Inc. in the United States and other
countries.
Copyright © 2009, Esmertec AG. All Rights Reserved.
Copyright © 2009, Dilithium Networks, Inc. All Rights Reserved.
ArcSoft MMS Composer™ Copyright © 2003-2009, ArcSoft, Inc. and its licensors. All Rights
Reserved. ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. in the
United States and/or other countries.
Copyright © 2009, Aplix Corporation. All Rights Reserved.
Licensed by QUALCOMM Incorporated under one or more of the following patents:
4,901,307 ; 5,490,165 ; 5,056,109 ; 5,504,773 ; 5,101,501 ; 5,778,338 ; 5,506,865
5,109,390 ; 5,511,073 ; 5,228,054 ; 5,535,239 ; 5,710,784 ; 5,267,261 ; 5,544,196
5,267,262 ; 5,568,483 ; 5,337,338 ; 5,659,569 ; 5,600,754 ; 5,414,796 ; 5,657,420
5,416,797
All other company, product and service names mentioned herein are trademarks,
registered trademarks or service marks of their respective owners.
HTC shall not be liable for technical or editorial errors or omissions contained herein,
nor for incidental or consequential damages resulting from furnishing this material. The
information is provided “as is”without warranty of any kind and is subject to change
without notice. HTC also reserves the right to revise the content of this document at any
time without prior notice.
No part of this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording or storing in a retrieval
system, or translated into any language in any form without prior written permission of
HTC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Health Information and Safety Precautions
When using this product, the safety precautions below must be taken to avoid possible
legal liabilities and damages. Retain and follow all product safety and operating
instructions. Observe all warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to the
equipment, observe the following precautions.
ELECTRICAL SAFETY
This product is intended for use when supplied with power from the designated
battery or power supply unit. Other usage may be dangerous and will invalidate
any approval given to this product.
SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION
CAUTION: Connecting to improperly grounded equipment can result in an electric
shock to your device.
This product is equipped with a USB Cable for connecting with desk-top or
notebook computer. Be sure your computer is properly grounded (earthed) before
connecting this product to the computer. The power supply cord of a desktop or
notebook computer has an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet which is properly
installed and grounded in accordance with all local codes and ordinances.
SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT
•
Use the correct external power source
A product should be operated only from the type of power source indicated
on the electrical ratings label. If you are not sure of the type of power source
required, consult your authorized service provider or local power company.
For a product that operates from battery power or other sources, refer to the
operating instructions that are included with the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Handle battery packs carefully
This product contains a Li-ion Polymer battery. There is a risk of fire and
burns if the battery pack is handled improperly. Do not attempt to open or
service the battery pack. Do not disassemble, crush, puncture, short external
contacts or circuits, dispose of in fire or water, or expose a battery pack to
temperatures higher than 140°F (60°C).
WARNING: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. TO REDUCE RISK OF FIRE OR BURNS, DO NOT DISASSEMBLE,
CRUSH, PUNCTURE, SHORT EXTERNAL CONTACTS, EXPOSE TO
TEMPERATURE ABOVE 140°F (60°C), OR DISPOSE OF IN FIRE OR WATER.
REPLACE ONLY WITH SPECIFIED BATTERIES. RECYCLE OR DISPOSE OF USED
BATTERIES ACCORDING TO THE LOCAL REGULATIONS OR REFERENCE
GUIDE SUPPLIED WITH YOUR PRODUCT.
•
Take extra precautions
•
•
•
•
•
Keep the battery or device dry and away from water or any liquid as it may
cause a short circuit.
Keep metal objects away so they don’t come in contact with the battery or
its connectors as it may lead to short circuit during operation.
The phone should be only connected to products that bear the USB-IF
logo or have completed the USB-IF compliance program.
Do not use a battery that appears damaged, deformed, or discolored, or
the one that has any rust on its casing, overheats, or emits a foul odor.
Always keep the battery out of the reach of babies and small children, to
avoid swallowing of the battery. Consult the doctor immediately if the
battery is swallowed.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
If the battery leaks:
• Do not allow the leaking fluid to come in contact with skin or clothing.
If already in contact, flush the affected area immediately with clean
water and seek medical advice.
• Do not allow the leaking fluid to come in contact with eyes. If already
in contact, DO NOT rub; rinse with clean water immediately and seek
medical advice.
• Take extra precautions to keep a leaking battery away from fire as there
is a danger of ignition or explosion.
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT
Keep this product away from excessive moisture and extreme temperatures. Do not
leave the product or its battery inside a vehicle or in places where the temperature
may exceed 140°F (60°C), such as on a car dashboard, window sill, or behind a
glass that is exposed to direct sunlight or strong ultraviolet light for extended
periods of time. This may damage the product, overheat the battery, or pose a risk
to the vehicle.
PREVENTION OF HEARING LOSS
CAUTION: Permanent hearing loss may occur if earphones or headphones are
used at high volume for prolonged periods of time.
Note
For France, mobile headphones, earphones, and wired remote controllers (listed
below) for this device have been tested to comply with the Sound Pressure Level
requirement laid down in NF EN 50332-1:2000 and/or NF EN 50332-2:2003 standards
as required by French Article L. 5232-1.
• Earphone, manufactured by Cotron, Model name: HS S200.
SAFETY IN AIRCRAFT
Due to the possible interference caused by this product to an aircraft’s navigation
system and its communications network, using this device’s phone function on
board an airplane is against the law in most countries. If you want to use this device
when on board an aircraft, remember to turn off the phone by switching to Flight
Mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENVIRONMENT RESTRICTIONS
Do not use this product in gas stations, fuel depots, chemical plants or where
blasting operations are in progress, or in potentially explosive atmospheres such
as fuelling areas, fuel storehouses, below deck on boats, chemical plants, fuel or
chemical transfer or storage facilities, and areas where the air contains chemicals or
particles, such as grain, dust, or metal powders. Please be aware that sparks in such
areas could cause an explosion or fire resulting in bodily injury or even death.
EXPLOSIVE ATMOSPHERES
When in any area with a potentially explosive atmosphere or where flammable
materials exist, the product should be turned off and the user should obey all signs
and instructions. Sparks in such areas could cause an explosion or fire resulting in
bodily injury or even death. Users are advised not to use the equipment at refueling
points such as service or gas stations, and are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots, chemical plants, or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are often, but not always, clearly
marked. These include fueling areas, below deck on boats, fuel or chemical transfer
or storage facilities, and areas where the air contains chemicals or particles, such as
grain, dust, or metal powders.
ROAD SAFETY
Vehicle drivers in motion are not permitted to use telephony services with
handheld devices, except in the case of emergency. In some countries, using hands-
free devices as an alternative is allowed.
SAFETY PRECAUTIONS FOR RF EXPOSURE
•
Avoid using your device near metal structures (for example, the steel frame of
a building).
•
Avoid using your device near strong electromagnetic sources, such as
microwave ovens, sound speakers, TV and radio.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Use only original manufacturer-approved accessories, or accessories that do
not contain any metal.
Use of non-original manufacturer-approved accessories may violate your
local RF exposure guidelines and should be avoided.
INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS
This product may cause medical equipment to malfunction. The use of this device is
forbidden in most hospitals and medical clinics.
If you use any other personal medical device, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information.
Turn the phone OFF in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the event
of such interference, you may want to consult your service provider, or call the
customer service line to discuss alternatives.
NONIONIZING RADIATION
This product should be operated in the suggested normal condition only to ensure
the radiative performance and safety of the interference. As with other mobile radio
transmitting equipment, users are advised that for satisfactory operation of the
equipment and for the safety of personnel, it is recommended that no part of the
human body be allowed to come too close to the antenna during operation of the
equipment.
Use only the supplied integral antenna. Use of unauthorized or modified antennas
may impair call quality and damage the phone, causing loss of performance and
SAR levels exceeding the recommended limits as well as result in non-compliance
with local regulatory requirements in your country.
Download from Www.Somanuals.com. All Manuals Search And Download.
To assure optimal phone performance and
ensure human exposure to RF energy is
within the guidelines set forth in the relevant
standards, always use your device only in its
normal-use position. Do not touch or hold
the antenna area unnecessarily when placing
or receiving a phone call. Contact with the
antenna area may impair call quality and
cause your device to operate at a higher
power level than needed. Avoiding contact
with the antenna area when the phone is IN
USE optimizes the antenna performance and
the battery life.
Antenna
location
General Precautions
•
Avoid applying excessive pressure to the device
Do not apply excessive pressure on the screen and the device to prevent
damaging them and remove the device from your pants’pocket before sitting
down. It is also recommended that you store the device in a protective case.
Cracked display screens due to improper handling are not covered by the
warranty.
•
•
Device getting warm after prolonged use
When using your device for prolonged periods of time, such as when you’re
talking on the phone, charging the battery or browsing the web, the device
may become warm. In most cases, this condition is normal and therefore
should not be interpreted as a problem with the device.
Heed service markings
Except as explained elsewhere in the Operating or Service documentation,
do not service any product yourself. Service needed on components inside
these compartments should be done by an authorized service technician or
provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Damage requiring service
Unplug the product from the electrical outlet and refer servicing to an
authorized service technician or provider under the following conditions:
•
•
•
•
•
Liquid has been spilled or an object has fallen into the product.
The product has been exposed to rain or water.
The product has been dropped or damaged.
There are noticeable signs of overheating.
The product does not operate normally when you follow the operating
instructions.
Avoid hot areas
The product should be placed away from heat sources such as radiators, heat
registers, stoves, or other products (including, but not limited to, amplifiers)
that produce heat.
•
•
Avoid wet areas
Never use the product in a wet location.
Avoid using your device after a dramatic change in temperature
When you move your device between environments with very different
temperature and/or humidity ranges, condensation may form on or within
the device. To avoid damaging the device, allow sufficient time for the
moisture to evaporate before using the device.
Note When taking the device from low-temperature conditions into a warmer
environment or from high-temperature conditions into a cooler environment,
allow the device to acclimate to room temperature before turning on the power.
•
•
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings in the
product. Slots and openings are provided for ventilation. These openings
must not be blocked or covered.
Mounting accessories
Do not use the product on an unstable table, cart, stand, tripod, or bracket.
Any mounting of the product should follow the manufacturer’s instructions,
and should use a mounting accessory recommended by the manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Avoid unstable mounting
Do not place the product with an unstable base.
Use product with approved equipment
This product should be used only with personal computers and options
identified as suitable for use with your equipment.
•
•
Adjust the volume
Turn down the volume before using headphones or other audio devices.
Cleaning
Unplug the product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use
water to clean the LCD screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction.......................................................................................................................... 19
T-Mobile.Services.and.Applications................................................................................. 20
T-Mobile myFaves®...................................................................................................................22
Activating.Service................................................................................................................ 23
1.1. Inside.the.Box................................................................................................................ 25
1.2. Getting.to.Know.Your.Phone...................................................................................... 26
Trackball.......................................................................................................................................28
LED alerts.....................................................................................................................................28
1.3. Installing.the.SIM.Card,.Battery,.and.Storage.Card................................................ 29
1.4. Charging.the.Battery................................................................................................... 33
1.5. Turning.the.Phone.On.and.Off................................................................................... 34
1.6. Home.Screen................................................................................................................. 34
1.7. Status.Icons................................................................................................................... 39
1.8. Start.Menu..................................................................................................................... 40
1.9. Quick.List....................................................................................................................... 40
Download from Www.Somanuals.com. All Manuals Search And Download.
1.10. Using.the.QWERTY.Keyboard.................................................................................. 41
1.11. Battery.Information................................................................................................... 44
2.1. Setting.the.Ring.Tone.................................................................................................. 47
2.2. Making.a.Call................................................................................................................. 48
2.3. Receiving.and.Ending.a.Call....................................................................................... 50
2.4. In-Call.Options.............................................................................................................. 51
2.5. Additional.Dialing.Information................................................................................. 52
Making an international call.................................................................................................52
2.6. Setting.Up.Bluetooth.SIM.Access.for.Car.Kit.Phones.........................................................53
3.1. About.Synchronization............................................................................................... 55
3.4. Synchronizing.with.Your.Computer.......................................................................... 58
Selecting information to synchronize...............................................................................59
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5. Synchronizing.via.Bluetooth...................................................................................... 60
3.6. Synchronizing.Music.and.Video................................................................................ 61
4.1. Personalizing.Your.Phone........................................................................................... 63
4.2. Copying.and.Managing.Files...................................................................................... 68
4.3. Adding.and.Removing.Programs.............................................................................. 69
4.4. Managing.Memory...................................................................................................... 71
Using Task Manager.................................................................................................................71
4.5. Protecting.Your.Phone................................................................................................ 72
4.6. Restarting.Your.Phone................................................................................................. 74
4.7. Resetting.Your.Phone.................................................................................................. 74
5.1. Contacts......................................................................................................................... 75
Editing and calling a contact................................................................................................76
Finding a contact......................................................................................................................76
5.2. T-Mobile.myFaves......................................................................................................... 78
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3. SIM.Manager................................................................................................................. 83
5.4. Calendar......................................................................................................................... 84
5.5. Tasks................................................................................................................................ 87
5.6. Voice.Recorder.............................................................................................................. 88
6.1. Browsing.Messages.on.the.Home.Screen................................................................ 89
6.2. Messaging...................................................................................................................... 90
6.3. Text.Messages............................................................................................................... 90
Composing and sending text messages..........................................................................90
Managing text messages.......................................................................................................92
6.4. Multimedia.Messages.................................................................................................. 94
6.5. Audio.Postcards............................................................................................................ 96
6.6. Instant.Messaging........................................................................................................ 98
6.7. Set.Up.E-Mail................................................................................................................. 99
6.8. E-mail............................................................................................................................102
Customizing e-mail settings.............................................................................................. 105
7.1. Synchronizing.with.Your.Company.E-mail.Server....................................................107
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2. Working.with.Company.E-mail................................................................................109
Out-of-office auto-reply...................................................................................................... 111
7.3. Managing.Meeting.Requests...................................................................................113
7.4. Finding.Contacts.in.the.Company.Directory.........................................................114
7.5. E-mail.Security............................................................................................................115
8.1. Comm.Manager..........................................................................................................119
8.2. Connecting.to.the.Internet.......................................................................................120
Wi-Fi ........................................................................................................................................... 120
Dial-up ...................................................................................................................................... 122
8.3. Internet.Explorer.Mobile...........................................................................................123
Navigating web pages......................................................................................................... 124
8.4. YouTube........................................................................................................................125
8.5. Internet.Sharing.(Using.Your.Phone.as.a.Modem)...............................................130
Download from Www.Somanuals.com. All Manuals Search And Download.
8.6. Bluetooth.....................................................................................................................131
Beaming information using Bluetooth.......................................................................... 134
Using the phone as a Bluetooth modem...................................................................... 136
8.7. Windows.Live™............................................................................................................138
8.8. Windows.Live.Messenger.........................................................................................140
Personalizing Messenger.................................................................................................... 143
9.1. Google.Maps...............................................................................................................145
9.2. Windows.Live.Search.................................................................................................147
9.3. Guidelines.and.Preparation.for.Using.GPS............................................................149
9.3. Downloading.Satellite.Data.via.QuickGPS............................................................150
Using zoom.............................................................................................................................. 156
Download from Www.Somanuals.com. All Manuals Search And Download.
10.2. Photo.&.Video.Album..............................................................................................163
10.3. Windows.Media.Player.Mobile..............................................................................165
About the screens and menus.......................................................................................... 166
10.4. Java.Applications.....................................................................................................170
11.1. Adobe®.Reader®.LE..................................................................................................173
11.2. Microsoft®.Office.Mobile........................................................................................174
11.3. Speed.Dial.................................................................................................................175
11.4. Voice.Command.......................................................................................................176
11.5. Handango.InHand...................................................................................................178
11.6. My.Account...............................................................................................................178
A.1. Specifications.............................................................................................................179
A.2. Regulatory.Notices....................................................................................................181
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to T-Mobile®
Introduction
This User Manual provides you with detailed instructions on using your
T-Mobile Dash™ 3G and services.
You will also find information from the following sources:
T-Mobile Customer Care
The T-Mobile Customer Care team offers responsive, knowledgeable customer
support 24 hours a day, seven days a week. In addition, you can always access free
online help for your device at support.t-mobile.com, and for your account at
my.t-mobile.com.
•
General Questions
Our Customer Care team can assist in many things including service
activation, billing, GSM/GPRS coverage information, voicemail, and feature
additions. Just dial 1-800-937-8997 or 611 on your device.
Windows Mobile® Web site
(http://www.microsoft.com/windowsmobile)
Download from Www.Somanuals.com. All Manuals Search And Download.
20 Welcome to T-Mobile
T-Mobile Services and Applications
With your new T-Mobile Dash 3G and T-Mobile’s service package, you get the
freedom of excellent voice and broadband connectivity in many locations
nationwide.
Important
By using T-Mobile services, you acknowledge that you have read, understood
and agreed to be bound by each of the terms and conditions of the Service
Agreement.
When you activate service with T-Mobile, the following features and services are
available to you:
Voice/Phone
•
•
•
•
•
•
Local calling and nationwide long distance calling
International calling *
Caller ID
Call waiting and call hold **
Conference calling **
Call forwarding **
*
Log on to my.t-mobile.com to set up international calling.
See www.t-mobile.com/international/ for rate and other information on international
services.
** • Airtime rates apply for all completed calls. Calls that are forwarded to numbers outside
the local calling area are charged long distance rates. These features may include
charges for multiple calls.
• Calls made in any T-Mobile coverage area, including 911 calls, may not always be
completed due to factors such as weather conditions, terrain, foliage, building structures,
and equipment limitations.
• You can use your device to access 911 Emergency Service while you are on a call. You can
access 911 even if you DO NOT have a SIM card in the device. All 911 calls are FREE.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to T-Mobile 21
Voicemail
Your T-Mobile Dash 3G has been programmed to forward calls when your line is
busy or when you are not available. T-Mobile’s voicemail system offers your caller
the option to record a voice message that you can play back at your convenience or
to send a numeric page to your device.
Note
Airtime charges apply to receipt and retrieval of voicemail messages.
E-mail
Set Up E-mail (
) provides you unlimited access to your work and personal
e-mail. Instantly access your e-mail from AOL® AIM®, Yahoo!® , Microsoft® Exchange
and many more, including any POP3 or IMAP4 e-mail server.
For more information about setting up and using e-mail, see Chapter 6 and 7.
Messaging services
Text Messaging (SMS)
Text messaging allows you to send, receive, and reply to short text messages using
your device. Messages may be sent to and from mobile devices that support text
messaging. You may be charged for using text messaging depending on your rate
plan. Visit www.t-mobile.com or a T-Mobile store for domestic and international
text messaging rates.
For more information about sending text messages, see Chapter 6.
Multimedia Messaging
Multimedia Messaging allows you to send and receive picture messages. You can
take pictures and videos using the device’s integrated camera and send them to
family and friends. You may be charged for using Multimedia Messaging depending
on your rate plan. Visit www.t-mobile.com or a T-Mobile store for domestic
and international Multimedia Messaging rates, and information on phones and
participating services capable of receiving Multimedia Messages.
For more information about sending Multimedia Messages, see Chapter 6.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 Welcome to T-Mobile
Instant Messaging (IM)
Your device comes with instant messaging (IM) applications pre-installed for your
convenience. Your normal screen name and password work just as they would on
any computer connected to the Internet. You may be charged for using instant
messaging depending on your rate plan.
Visit www.t-mobile.com or a T-Mobile store for domestic and international instant
messaging rates.
For more information about using Instant Messaging, see Chapter 6.
Note
Separate additional charges may apply to send/receive domestic/international e-mail,
text, multimedia and instant messages.
T-Mobile myFaves®
T-Mobile myFaves helps you stay connected to the people who matter most in
your life. Simply choose any five U.S. phone numbers* you call most often, on any
network, and have them displayed on your phone’s main screen. To subscribe, go to
www.t-mobile.com.
When you subscribe to the service, you can take advantage of the following:
•
Unlimited nationwide calling to any five numbers, on any network (even
landlines)
•
•
•
One-touch calling, text messaging**, and photo sharing**
No domestic roaming or domestic long-distance charges
Personalize contacts with favorite pictures** or downloadable icons**
*
myFaves only applies to calls directly between two people and allows unlimited nationwide
calling to 5 U.S. numbers. You can change myFaves numbers once/month
** Separate purchase/download charges may apply. Separate charges apply to send/receive
domestic/international text and picture messages.
For more information, see “T-Mobile myFaves®”in Chapter 5.
You can also visit www.t-mobile.com for the latest information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to T-Mobile 23
Activating Service
If your service has not been activated, then follow the steps in this section to
activate. The T-Mobile Activations representative will set up your service and assign
your mobile number. It takes about 20 minutes to activate voice service and may
take up to 24 hours to activate data service. Business and government accounts
may take additional time to activate voice and data service. By activating service,
you acknowledge that you have read and agreed to the terms and conditions of the
Service Agreement.
1. Have your Service Agreement and the following information ready for your
Activations representative:
•
Name, home address, home phone, preferred billing address
Note For business and government accounts, your Activations representative will
also require your physical address, company name or government agency
name, and the tax ID.
•
Social Security number, current driver’s license number, and date of birth
for credit-check purposes
•
•
•
•
•
Model number of your device (T-Mobile Dash 3G)
SIM serial number (on the back of the SIM card)
IMEI number (on the label under the battery)
Agent code (on your service agreement)
Your choice of T-Mobile rate plans and services
2. Call Customer Care at 1-800-937-8997 from a landline phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 Welcome to T-Mobile
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Getting Started
1.1 Inside the Box
You should find the following items inside the box:
•
•
•
•
•
•
•
•
•
T-Mobile Dash™ 3G phone
Battery
AC adapter
USB sync cable
Wired stereo headset
Getting Started disc
Getting Started
Multifunction Cable
Pouch
Download from Www.Somanuals.com. All Manuals Search And Download.
26 Getting Started
1.2 Getting to Know Your Phone
Notification LED
See “LED Alerts”for
details.
Earpiece
Listen to a phone call.
BACK
Press to return to the
previous screen.
HOME
• Press to go to the
Home Screen.
• Press and hold to
display the Quick List.
Right SOFT KEY
Press to open the program
or perform the function
shown above the button.
TRACKBALL
Left SOFT KEY
END/POWER
Press to open the
program or perform
the function shown
above the button.
• Press to end a call or
return to the Home
screen.
• Press and hold to turn
the phone on and off.
SEND
• Press to answer an
incoming call or dial
a number.
• During a call, press
and hold to toggle
the speakerphone
on and off.
QWERTY Keyboard
See “Using the QWERTY
Keyboard”in this
chapter for details.
Keypad
SHORTCUT KEY
• Press to open Internet
Explorer.
• Press and hold to activate
Voice Command.
LOCK
Press and hold to lock
the phone. To unlock,
press the left SOFT KEY
and press this button.
MESSAGING
Press to open the
Messaging screen.
VIBRATE
Press and hold to toggle
vibrate mode on and off.
Microphone
CAMERA
Press to open the Camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 27
Sync Connector/Earphone Jack
• Connect the supplied USB cable to synchronize
information or plug in the AC adapter to recharge the
battery.
• Connect the supplied USB stereo headset for hands-free
conversation or for listening to audio media.
Speaker
Volume Up
Press to increase
the phone volume.
Volume Down
Press to decrease
the phone volume.
2.0 Megapixel
Camera
See “Taking Photo
and Videos with
the Phone Camera”
in Chapter 10.
Strap Holder
Download from Www.Somanuals.com. All Manuals Search And Download.
28 Getting Started
Trackball
Roll the TRACKBALL to scroll left, right, up, or down. Press the TRACKBALL to select
an item on the screen.
Note
To configure TRACKBALL settings such as sensitivity, repeat mode and more, select
Start > Settings > Trackball.
LED alerts
The notification LED indicates battery charging status and notification.
Light Behavior
Sold Green
Meaning
Battery is fully charged.
Flashing Green
Multimedia message downloaded/new e-mail/new multimedia/
new text message/missed phone call/new voicemail/reminder
Solid Amber
Flashing Red
Solid Red
Charging
Battery is low
Battery is totally discharged (shown when connected to the AC
power adapter)
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 29
1.3 Installing the SIM Card, Battery, and Storage Card
You need to remove the back cover before you can install the SIM card, battery and
storage card on your phone. Also, make sure to always turn off the power before
installing or replacing the SIM card and battery.
Toremovethebackcover
1. Make sure your device is turned off.
2. Hold the device securely with the front facing down.
3. With your thumb or finger, lift up the bottom of the back cover.
Toreplacethebackcover
1. Secure the top part of the back cover first by aligning the two tabs on the
back cover into the two openings located on the topmost part of the back of
the device.
2. Press the bottom part of the back cover down to lock the cover into place.
You will hear a click when the back cover is locked in place.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 Getting Started
SIM card
Your T-Mobile SIM card contains your basic subscriber information such as your
phone number and identifies you to the T-Mobile network.
To install the SIM card
1. Remove the battery, if it is
installed.
SIM card lock
2. Locate the SIM card slot and
unlock the SIM card lock by
pressing it towards the battery
compartment.
3. Insert the SIM card with its gold
contacts facing down and the
cut-off corner facing away from
the slot (check the SIM card
Cut-off
corner
slot for the correct orientation
when inserting the SIM card).
4. Slide the SIM card completely
into the slot.
5. Press the SIM card lock closed
to lock the SIM card in place.
To remove the SIM card
1. Remove the battery if it is
installed.
2. Unlock the SIM card lock.
3. Slide the SIM card out to
remove it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 31
Battery
Your phone comes with a rechargeable Lithium-ion polymer battery and is
designed to use only manufacturer-specified original batteries and accessories.
To install the battery
1. Remove the back cover. For instructions,
see “To remove the back cover”.
2. Align the exposed metal contacts on the
edge of the battery with the prongs in
the body of the phone.
3. Insert the contacts side of the battery
first and then gently push the battery
into place.
4. Replace the back cover. For instructions,
see “To replace the back cover”.
To remove the battery
1. Make sure your phone is turned off.
2. Remove the back cover.
3. The lower part of the battery
compartment has a groove. Lift the
battery from the groove to remove it..
Groove
Download from Www.Somanuals.com. All Manuals Search And Download.
32 Getting Started
Storage card
To have additional storage for your photos, videos, music, and files, you can
purchase a microSD™ card and install it into your device.
Note
You can install and use a microSD card with up to 32 GB of storage.
To install the microSD card
1. Remove the back cover. For instructions, see “To remove the back cover”.
2. Insert the microSD card into the slot with its gold contacts facing down until
it clicks into place. Refer to the illustration above the SIM card slot for the
correct orientation.
3. Replace the back cover. For instructions, see “To replace the back cover”.
Note
To remove the microSD card, press it to eject it from the slot.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 33
1.4 Charging the Battery
New batteries are shipped partially charged. Before you start using your phone, it
is recommended that you charge the battery. Some batteries perform best after
several full charge/discharge cycles. The battery is fully charged after about 3 hours
of charging.
To charge the battery
1. Connect the USB connector of the AC adapter to the sync connector on the
top right side of your phone.
Sync connector
2. Plug in the AC adapter to an electrical outlet to start charging the battery.
Note
Only the supplied AC adapter and USB sync cable must be used to charge the battery
of your phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 Getting Started
1.5 Turning the Phone On and Off
After installing your SIM card and battery and charging the battery, you can now
power on and start using your phone.
To turn on the power
1. Press the END/POWER button for a few seconds.
2. When you turn on your phone for the first time, the phone installs
customization settings and then restarts.
To turn off the power
1. Press the END/POWER button for a few seconds.
2. Select Yes on the confirmation screen.
1.6 Home Screen
The Home screen lets you quickly access various information, programs, and
settings on your phone. To access the Home screen anytime, press the HOME key.
1
Press the left SOFT KEY to open the Start menu
and choose from the available programs.
2
2
The title bar at the top of the screen displays
status icons and notifications, such as missed
calls, new messages, battery status, Bluetooth
and Wi-Fi connection status, and more. For more
information, see “Status Icons”in this chapter.
3
3
4
The Home screen has several panels, and the
screen displays the panel that you selected
using the TRACKBALL. See “Home screen panels”
for details.
Press the right SOFT KEY to open the program
or perform the function displayed above the
button.
1
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 35
Home screen panels
Navigate through the panels of the Home screen by scrolling the TRACKBALL up or
down. Scroll right or left to go through the options available on the selected panel.
Open the displayed item by pressing the TRACKBALL.
Home
Displays the current time and date, an alarm icon
if you have set up an alarm, and the Wi-Fi status if
you have turned on Wi-Fi.
While the Home panel is selected, press the
TRACKBALL to open the Clock & Alarm screen
where you can change the time zone, date, or
time as well as set your phone as an alarm clock.
Tip
Pressing the HOME key takes you to this panel.
myFaves®
Displays your myFaves contacts. Scroll left and
right and then press the TRACKBALL to select a
myFaves contact.
See Chapter 5 for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 Getting Started
Notification
Shows notifications of missed calls, voicemail,
text messages, multimedia messages, and e-mail.
You can also set up your e-mail account from this
panel, if you have not yet done so.
Note For missed calls, the default icon is shown if
there is no picture associated with the contact
who called you.
Appointments
Displays the next upcoming appointment on your
calendar. On this panel, you can do the following:
•
•
•
If you have several appointments, scroll right
or left to view each of these appointments.
Select Today to view all of the current day’s
appointments in Agenda view.
Press the TRACKBALL to open the Calendar
and create, edit or cancel appointments.
Messages
View snippets of your unread text or multimedia
messages, or create a new message. If you have
several unread messages, scroll right or left to
view additional message snippets.
Select the message to open and read the
complete message.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 37
Email
View snippets of your unread e-mail messages,
select Inbox to open your inbox, or select New
Email to create a new e-mail message. If you have
several unread e-mail messages, scroll right or left
to view additional message snippets.
Select the e-mail to open and read the complete
e-mail message.
Weather
The first time you access the Weather panel,
the option, Add City, is displayed. Press the
TRACKBALL to select a city for which you want to
view weather conditions.
After the weather information is displayed, press
the TRACKBALL again to view the 5-day forecast.
Tip
On the Forecast screen, select Menu > Refresh
to update the weather information. Select Menu
> Change City to select another city.
Internet Explorer
Quickly access your Internet Explorer Mobile
favorites. Scroll right or left to go through your
favorites and then press the TRACKBALL to open
Internet Explorer to your favorite web site.
Download from Www.Somanuals.com. All Manuals Search And Download.
38 Getting Started
Music
Play music files that are stored on the phone or on
the storage card.
Press the TRACKBALL to play or pause music
playback. Select Library to view your music
library.
Getting Started
Learn the basic features and settings of your
phone. Scroll right or left to go through the
available tutorials, and then press the TRACKBALL
to select and view a tutorial.
Tip
You can remove the Getting Started panel from
the Home screen. To remove, scroll right until
you see Done! Remove Getting Started, and
then press the TRACKBALL. On the Getting
Started screen, select the Add/Remove link.
Settings
From this panel, you can change the phone
profile, ring tone, and background image. You can
also access the Comm Manager and Task Manager.
Select All Settings to access all available settings
for your phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 39
1.7 Status Icons
The following are some of the status icons that you may see on the phone.
Icon
Description
Icon
Description
New text message
Speakerphone on
New e-mail
Ringer off
New voicemail
Vibrate call alert
New Live Messenger message
Roaming
3G in use
Lowercase text input
Voice call in progress
Data call in progress
Missed call
Uppercase text input, caps lock
Uppercase text input
Numeric or symbol input, locked
Numeric or symbol input
XT9 text input mode, lowercase
XT9 text input mode, uppercase
XT9 text input mode, caps lock
Bluetooth on
Full battery
Low battery
Very low battery
Battery charging
No battery or battery fault
Signal strength
No phone signal
Phone signal off
Bluetooth in visible mode
Bluetooth headset connected
Wi-Fi connected
No SIM card installed
Microphone muted
Connecting to wireless network
Wi-Fi enabled, but phone not connected
to a wireless network
Download from Www.Somanuals.com. All Manuals Search And Download.
40 Getting Started
1.8 Start Menu
Your phone comes with several programs
that you can start using immediately. On the
Home screen, select Start from the Home
panel to view the programs that are available
on your phone.
Tip
To easily open again recently-used
programs, you can enable the Recent
Programs menu which can keep track of
the 8 most recently-used programs.
To enable, on the Home screen, select
Start > Settings > Home Screen and
then select the Show Recent Programs
check box. Selecting Start on the Home
screen will first display the Recent
To show more programs, select More
or scroll the TRACKBALL down..
Programs menu before the Start menu.
1.9 Quick List
The Quick List offers convenient access to a list of functions, such as locking your
phone and keypad, opening Comm Manager, and choosing a different profile.
To access the Quick List
1. Press and hold the HOME button.
2. Choose the desired option and select
Select.
3. To exit the Quick List at any time,
select Cancel.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 41
1.10 Using the QWERTY Keyboard
You can enter text, numbers, and symbols using the QWERTY keyboard. The status
indicator on the top-right side of the display screen displays the input mode that
you are currently using.
Lowercase text input
Numeric or symbol input
Uppercase text input, caps lock
Uppercase text input
XT9 text input mode, lowercase
XT9 text input mode, uppercase
XT9 text input mode, caps lock
Numeric or symbol input, locked
Press
to toggle between uppercase, lowercase, and locked input when in any mode.
You can also do the following with the QWERTY keyboard.
•
•
•
To type lowercase letters, press the keys using your thumbs or fingers.
To use a single uppercase letter, press
and then press the corresponding key.
. To change back to all lowercase
To use all uppercase letters, press
+
letters, press
.
•
•
To enter a number, symbol or punctuation that is printed at the upper-right
corner of a key, press and then press the corresponding key.
To continuously enter numbers, symbols or punctuation that are printed
at the upper-right corner of the keys, press twice and then press the
corresponding keys. Press again to exit continuous input mode.
•
To open the Symbol table and insert numbers, symbols, special characters, or
punctuation, press
.
•
•
To backspace and delete a single character, press or BACK.
To delete several characters, press and hold or BACK.
•
•
Press
to enter a space.
While entering text, press
menu.
+
to display the text input options
Download from Www.Somanuals.com. All Manuals Search And Download.
42 Getting Started
Using predictive mode
Predictive mode analyzes your key presses and attempts to complete the word. It
also tries to predict your next word based on previous sentences you have entered.
To enter text in predictive mode
1. While entering text, press
+
to display the text input options
menu and then select Predictive Text > On.
2. Enter your text. While typing, a word list
will appear on the screen.
3. Scroll up or down the word list to choose
the word you want to insert, and then
press the TRACKBALL.
To add custom words to the XT9 My Words list
Save words that you often use but are not in the English dictionary into the XT9
My Words list. Words that you add into the XT9 My Words list will appear in the
predicted word list.
1. While entering text, press
+
to display the text input options
menu and then select XT9 My Words > Add.
Note You must first enable Predictive Text before you can select XT9 My Words from
the menu.
2. In the Add/Edit Word box, enter the word and select Done.
To edit or delete words in the XT9 My Words list, select Menu and then select the
appropriate command in the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 43
To set XT9 settings
On the text input options menu, choose XT9 Settings. In the screen, choose the
options you want and select Done.
Note
You must first enable Predictive Text before you can select XT9 Settings from the
menu.
•
Spell Correction. Corrects typographical errors by selecting from a list of
possible words that reflect the characters of the keys you have pressed as well
as characters of nearby keys.
•
•
•
Auto-Substitution. Automatically adds an apostrophe when you type
commonly contracted words (e.g. dont automatically becomes don’t).
Word Completion. Lets you select from a list of possible words based on the
keys that you pressed and on the words available in the dictionary.
Word completion by. Lets you choose which key to use to select a word from
the word completion list.
Using numeric mode
If a text box permits a numeric entry only, such as a phone number, the input mode
automatically defaults to Numeric mode. However, if you need to enter numbers
within a line of text, change to Numeric mode, and then change back to normal or
predictive mode to finish entering the text.
To enter numbers in text boxes
1. While entering text, press
+
to display the text input options
menu.
2. Select numeric mode (123) from the menu.
3. On the keypad, enter the number or numbers you want.
4. Change back to normal or predictive input mode by selecting either mode
from the text input options menu, and then finish entering your text.
Download from Www.Somanuals.com. All Manuals Search And Download.
44 Getting Started
Using the shortcut key
By default, pressing the SHORTCUT KEY ( ) opens Internet Explorer, while
pressing and holding the SHORTCUT KEY opens Voice Command. You can configure
this button to open other programs.
To configure the Shortcut Key to open other programs
1. Select Start > Settings > Shortcut Key.
2. In Short press, select the program to open when you briefly press the
SHORTCUT KEY.
3. In Press and hold, select the program to open when you press and hold the
SHORTCUT KEY.
4. Select Done.
1.11 Battery Information
Battery performance depends on many factors, including but not limited to
T-Mobile’s network configuration, signal strength, and the temperature of the
environment.
Battery life estimates (approximations):
•
Talk time:
Up to 510 minutes for GSM
Up to 300 minutes for WCDMA
•
Standby time: Up to 380 hours for GSM
Up to 480 hours for WCDMA
WARNING! To reduce risk of fire or burns:
•
•
•
•
•
Do not attempt to open, disassemble, or service the battery pack.
Do not crush, puncture, shorten external contacts, or dispose of in fire or water.
Do not expose to temperatures above 60˚C (140˚F).
Replace only with the battery pack designated for this product.
Recycle or dispose of used battery as stipulated by local regulation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 45
To check and optimize battery power
On the Home screen, select Start > Settings > Power > Power Management, and
adjust the backlight, display, or light sensor settings.
If you do not want to charge the battery while the phone is connected to the
computer, select Start > Settings > Power > Power Management and in When
device is turned on, do not charge the battery when connected to the PC,
select On.
To manage low battery
When the low-battery warning appears, do the following:
1. Immediately save your current data.
2. Synchronize with your PC or use the AC adapter to charge the battery.
3. Turn off your phone. Turn it back on only when you need to use it.
Download from Www.Somanuals.com. All Manuals Search And Download.
46 Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Using Phone Features
2.1 Setting the Ring Tone
Before you start receiving phone calls, you can first set your desired ring tone for
incoming calls.
To select a ring tone
1. On the Home screen, scroll down to the Settings panel.
2. Scroll right until you see Ringtone and then press the TRACKBALL.
3. On the Sounds screen, select a ringtone from the Ring tone list and then
select Done.
If you select Vibrate, the Vibrate icon (
)
will appear in the title bar, and the phone
will only vibrate when you receive a call. Selecting None from the Ring tone list
mutes the phone.
Note
For more information about setting other types of notification sounds such as sounds
for new text messages or new e-mail, see “Choosing how to be notified about events
or actions”in Chapter 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
48 Using Phone Features
2.2 Making a Call
You can make calls from the Phone screen, Contacts, Speed Dial, or the Call History.
Making a call from the Phone screen
1. To open the Phone screen, press the SEND button.
Tip
The Phone screen also automatically opens when you begin entering the first
digit or character of a phone number or contact name from the Home screen.
2. Enter the phone number or a stored contact name by pressing keys on the
keypad. Press the BACK key if you need to backspace.
3. Notice that as you enter numbers or
letters, a list of names and numbers
is displayed as your phone searches
Contacts, Call History, Speed Dial, and
your SIM card to find a matching name
or number. The next key you press
continues to narrow the search. When
you see the desired number or contact
name you want to call, select it, and
press SEND.
Making a call from Contacts
When you call a contact, his or her mobile phone number is, by default, selected on
the Contacts screen and dialed. You can call the mobile phone number or choose to
dial a different phone number.
1. On the Home panel, select Contacts.
2. Use the TRACKBALL to navigate to the desired contact.
3. To select the phone number to call, scroll the TRACKBALL left or right. The
letter representing the number changes to m (mobile), w (work), or h (home).
4. Press SEND to dial the selected number.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Phone Features 49
Tips
•
•
To view or edit information associated with the selected contact, select Menu > Edit.
To save a contact to your SIM card, select Menu > Copy Contact > To SIM.
To learn more about Contacts, see Chapter 5.
Making a call from Call History
The Call History keeps track of all missed calls as well as incoming and outgoing
phone calls.You can easily return a call from the Call History.
To make a return call
1. On the Home screen, select Start > Call History.
2. Select a contact name or phone number, and then press SEND.
Tip
You can also save a number to Contacts by selecting Save on the Call History screen.
To view the history of calls of a contact and call the contact
1. On the Call History screen, navigate to the contact name and then press the
TRACKBALL to view the history, such as the dialed, missed, or received call,
call duration, date, and time.
2. Navigate to the desired number in the history, and then press the TRACKBALL
to dial the number.
To filter the Call History screen
On the Call History screen, select Menu > Filter and then choose whether to filter
the screen to display Missed Calls, Incoming Calls, or Outgoing Calls only. To
display all calls, select No Filter.
Making a call from Speed Dial
You can quickly place calls to certain contacts or phone numbers by assigning them
with speed dial keys. To learn how to assign speed dial keys, see “Speed Dial”in
Chapter 11.
Download from Www.Somanuals.com. All Manuals Search And Download.
50 Using Phone Features
2.3 Receiving and Ending a Call
When you receive a phone call, you have the option to answer it or ignore it.
To answer or ignore an incoming call
•
•
•
To answer the call, press the SEND button.
To reject the call, press the END/POWER button.
To reject the call and to send a text message to
the caller’s mobile phone, select Send Text.
•
To mute the ringing sound without rejecting the
call, select Silence.
To end a call
When a call is in progress, press the END/POWER button to hang up.
To customize advanced phone settings
You can set advanced phone settings such as reject calls with a text message,
vibrate the phone when call is connected, and more.
1. Select Start > Settings > Phone > Advanced.
2. Enable or disable the available options by
selecting or clearing their respective check
boxes.
3. To change the default text message, select the
default message and press the TRACKBALL. Enter
your new message, and then select Done.
4. Select OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Phone Features 51
2.4 In-Call Options
Your phone gives you various options when you are in a call.
To turn the speakerphone on and off
During a call, press and hold the SEND key to turn the speakerphone on or off. The
speakerphone icon ( ) appears in the title bar when the speakerphone is on.
WARNING!
To avoid damage to your hearing, do not hold your phone against your ear
when the speakerphone is turned on.
To adjust the call volume
Press the VOLUME BUTTONS on the side of the phone.
To enable Call Waiting
Call Waiting should be enabled and supported for you to be notified of an incoming
call when you are using the phone.
1. On the Home screen, select Start > Settings > Phone > Call Waiting.
2. After the settings have been downloaded from T-Mobile, select the Provide
call waiting notifications check box and select Done.
To answer another call
1. Select Answer to take the second call and put the first call on hold.
2. Do one of the following while you are connected with two calls.
•
•
To end the second call and return to the first call, press END/POWER
.
To switch between the two calls, press the TRACKBALL.
To set up a conference call
1. Either put a call on hold (press the TRACKBALL) and dial a second number, or
answer another incoming call.
2. Select Menu > Conference.
Note
If the conference connection is successful, the word “Conference”appears on the
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
52 Using Phone Features
2.5 Additional Dialing Information
Making an emergency call
Dial the emergency number (911) and then press SEND.
Making an international call
1. Press and hold the 0 (Zero) key on the keypad until “+”symbol appears.
2. Enter the full phone number, and then press SEND.
For example: +1-909-22222222, which is in the following format:
+<country code>-<area code>-<phone number>.
Inserting a pause or long pause in a dialing sequence
Some international calls or phone numbers require a pause or long pause in the
dialing sequence in order for the call to process successfully.
1. On the Home panel, select Contacts.
2. Select the contact and press the TRACKBALL to open the contact card.
3. Select Menu > Edit.
4. Position the cursor on the phone number where you want to insert a pause.
5. Select Menu > Insert Pause or Insert Wait. The letter “p”(Insert Pause) or “w”
(Insert Wait) will appear in the number sequence to indicate where the pause
or long pause will occur.
6. Select Done.
Notes
•
Long pause is not available for contacts stored on the SIM card.
•
When you call a number that contains a long pause, you must press SEND again to
continue dialing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Phone Features 53
2.6 Setting Up Bluetooth SIM Access for Car Kit Phones
Car kits that support the SIM Access Profile (SAP) can connect to your phone and
access your SIM card via Bluetooth.
Notes
•
•
Make sure that all phone contacts are stored in the SIM card and not in the phone
memory. Configure the car kit to download contacts only from the SIM card.
Contact T-Mobile to find out which car kit phone models are compatible with your
phone.
1. In your phone, make sure that Bluetooth is turned on and set to visible mode.
For instructions, see “Bluetooth modes”in Chapter 8.
2. Select Start > Settings > Connections > Bluetooth > SIM Access.
3. On the BT Remote SIM Access screen, select the Remote SIM Access check
box and select Done.
4. Connect the car kit phone to your phone via Bluetooth. For instructions,
consult your car kit phone’s manual.
5. A pop-up message should appear on your phone saying that a connection
has been established between your phone and car kit. Select OK.
6. On the BT Remote SIM Access screen, select Done.
Note
You will not be able to make/receive calls, send/receive messages or perform related
activities on your phone when the SIM Access Profile connection is active. You will be
able to do all this from the car kit phone during this time.
Download from Www.Somanuals.com. All Manuals Search And Download.
54 Using Phone Features
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Synchronizing Information with
Your Computer
3.1 About Synchronization
You can take information from your computer wherever you go by synchronizing
them to your phone. The following types of information can be synchronized:
•
Microsoft Outlook® information, which includes Outlook e-mail, contacts,
calendar, tasks, and notes
•
•
•
•
Notes, which are created using Microsoft® Office OneNote® 2007
Media, such as pictures, music and video
Favorites, which are the bookmarked links to your favorite web sites
Files, such as documents and other files
Note
You can also synchronize Outlook e-mail, contacts, calendar, and tasks on your phone
with the Exchange Server at your work. For more information about setting up your
phone to synchronize with the Exchange Server, see Chapter 7.
Before you can synchronize, you will first need to install and set up the
synchronization software on your computer. For information about installing and
using the synchronization software on your computer, see “Setting Up Windows
Mobile Device Center on Windows Vista”and “Installing and Setting Up ActiveSync
on Windows XP”in this chapter.
After installing the synchronization software on your computer, connect the device
to your computer using the USB sync cable. Upon connecting the sync cable to
your phone and your computer, the synchronization process starts automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
56 Synchronizing Information with Your Computer
You can also synchronize information with your computer using Bluetooth. See
“Synchronizing via Bluetooth”later in this chapter.:
Notes
•
ActiveSync or Windows Mobile Device Center only synchronizes data on your
computer and device. If you have installed a storage card and you want to back up
files from the storage card, use Windows Explorer on your computer to copy files
from the storage card to your computer.
•
If you are sending your device for repair or performing a hard reset, data from your
device will be lost. It is recommended that you sync your device to your computer
to back up your files. To back up files from the storage card to your computer, use
Windows Explorer to copy files from the storage card to the computer.
3.2 Setting Up Windows Mobile® Device Center on
Windows Vista®
Microsoft Windows Mobile® Device Center is the replacement for Microsoft®
ActiveSync® on Windows Vista®.
Note
Some versions of Windows Vista come pre-installed with Windows Mobile Device
Center. If Windows Mobile Device Center is not available on your Windows Vista, you
can install it from the Getting Started Disc that came with your phone.
Setting up synchronization in Windows Mobile Device Center
1. Connect your phone to your PC. Windows Mobile Device Center configures
itself and then opens.
2. On the license agreement screen, select Accept.
3. On the Windows Mobile Device Home screen, select Set up your device.
Note Choose Connect without setting up your device if you only want to transfer
media files, check for updates, and explore your phone but not sync Outlook
information.
4. Select the information types that you want to synchronize then select Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronizing Information with Your Computer 57
5. Enter a phone name for your phone and select Set Up.
When you finish the wizard, Windows Mobile Device Center synchronizes your
phone automatically. Notice that Outlook e-mail messages and other information
will appear on your phone after synchronization.
3.3 Installing and Setting Up ActiveSync® on
Windows XP®
Follow the steps below to install and set up ActiveSync 4.5 or later on Windows XP
or other compatible Windows systems.
Note
For a list of compatible Windows systems, please go to
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx
Installing and setting up ActiveSync
1. Insert the Getting Started Disc into the disc drive on your PC.
2. Follow the on-screen instructions to install ActiveSync.
3. After installation is completed, connect your phone to your PC.
4. The Synchronization Setup Wizard automatically starts and guides you to
create a synchronization relationship. Select Next to proceed.
5. To synchronize your phone with your computer, clear the Synchronize
directly with a server running Microsoft Exchange Server check box then
select Next.
6. Select the information types that you want to synchronize and then select
Next.
7. Select Finish.
When you finish the wizard, ActiveSync synchronizes your phone automatically.
Notice that Outlook e-mail messages and other information will appear on your
phone after synchronization.
Download from Www.Somanuals.com. All Manuals Search And Download.
58 Synchronizing Information with Your Computer
3.4 Synchronizing with Your Computer
Connect your phone to your PC to synchronize the information between your
phone and PC. While your phone is connected, ActiveSync (or Windows Mobile
Device Center on your PC) synchronizes every time you make a change on either
the PC or your phone.
Starting and stopping synchronization
You can manually synchronize either from your phone or computer.
From your phone
Select Start > Applications > ActiveSync, then select Sync. To end synchronization
before it completes, select Stop.
Tip
To delete a partnership with one computer completely, disconnect your phone from
that computer first. In ActiveSync on your phone, select Menu > Options, select the
computer name, then select Menu > Delete.
From Windows Mobile Device Center
1. Click Start > All Programs > Windows Mobile Device Center.
2. Click
To end synchronization before it completes, click
From ActiveSync on your computer
at the lower left of the Windows Mobile Device Center.
.
When you connect your device to your computer, ActiveSync automatically opens
on your computer and synchronizes.
•
•
To manually start synchronization, click
.
To end synchronization before it completes, click
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronizing Information with Your Computer 59
Selecting information to synchronize
You can change the information types and the amount of information to
synchronize for each type either on your phone or your computer. Follow the steps
below to change synchronization settings on your phone.
Note
Before changing synchronization settings on your phone, disconnect it from your
computer.
1. In ActiveSync on your phone, select Menu > Options.
2. Select the check box for any items you want to synchronize. If you cannot
select a check box, you might have to clear the check box for the same
information type elsewhere in the list.
3. To change synchronization settings for an information type, for instance,
E-mail, select it and select Settings.
You can then set the download size limit, specify the time period of
information to download, and more.
Notes
•
Some information types such as Favorites, Files and Media cannot be selected in
ActiveSync Options on your phone. You can only select or clear these items from
your computer’s Windows Mobile Device Center or ActiveSync.
•
A computer can have sync partnerships with many different Windows Mobile
powered phone, but a phone can have sync partnerships with at most two
computers. To ensure that your phone will synchronize properly with both
computers, set up the second computer using the same synchronization settings
you used on the first computer.
•
Outlook e-mail can be synchronized with only one computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 Synchronizing Information with Your Computer
Troubleshooting sync connection problems
In some cases, when the computer connects to the Internet or a local network, it
may disconnect the connection with your phone in favor of the Internet or network
connection.
If this happens, select Start > Settings > Connections > USB to PC, then clear the
Enable faster data Synchronization check box. This makes your computer utilize a
serial USB connection with your phone.
3.5 Synchronizing via Bluetooth
You can connect and synchronize your phone with the computer using Bluetooth.
To synchronize with a computer via Bluetooth
1. Set up the synchronization software (Windows Mobile Device Center or
ActiveSync) on your computer to use a Bluetooth connection. For more
information, see the software Help on your computer.
2. Make sure that Bluetooth on both your phone and the computer are turned
on and set to visible mode. See “Bluetooth modes”in Chapter 8 for details.
If this is the first time you have connected to this computer via Bluetooth,
you must first set up a Bluetooth partnership between your device and the
computer. For more information about creating a Bluetooth partnership, see
“Bluetooth partnerships”in Chapter 8.
3. On your phone, select Start > Applications > ActiveSync.
4. Select Menu > Connect via Bluetooth.
Notes
•
•
To preserve battery power, turn off Bluetooth when not in use.
To connect and synchronize your phone with a computer via Bluetooth, your
computer must have built-in Bluetooth or installed with a Bluetooth adapter or
dongle.
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronizing Information with Your Computer 61
3.6 Synchronizing Music and Video
If you want to carry your music or other digital media along with you while you
travel, set up Microsoft Windows Media Player on your computer to synchronize
music and video with your phone.
Other than selecting the media information type in ActiveSync to be synchronized,
all media synchronization settings must be set in Windows Media Player. Before
media can be synchronized, you must do the following:
•
Install Windows Media Player Version 11 on the PC. (Windows Media Player 11
works only in Windows XP or later versions).
•
•
Connect your phone to the PC with a USB cable.
Set up a sync partnership between the phone and Windows Media Player.
For more information about Windows Media Player on your phone, see “Windows
Media Player Mobile”in Chapter 10.
Download from Www.Somanuals.com. All Manuals Search And Download.
62 Synchronizing Information with Your Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Managing your Phone
4.1 Personalizing Your Phone
Setting up the Home screen
The Home screen is the starting place for most of the tasks you perform on your
phone. You can gain access to all features and programs from the Home screen.
To customize the Home screen
1. On the Home screen, select Start > Settings > Home Screen.
2. In Home screen layout, Color scheme, Background image, and Time out,
select the options you want, and select Done.
To set a picture as the background
1. On the Home screen, scroll to the Settings panel.
2. Scroll right until you see Background Image and then press the TRACKBALL.
3. Select the picture you want to use by scrolling right/left and then selecting
Done.
Download from Www.Somanuals.com. All Manuals Search And Download.
64 Managing your Phone
Setting the date, time, and other regional options
Your phone should already be set up with the regional settings that are appropriate
for your locale.
To change regional settings
You can specify the language, locale, date and time style, as well as number and
currency formatting options.
1. On the Home screen, select Start > Settings > Regional Settings.
2. In Locale, select the locale you want. The Locale option automatically
changes the format of the remaining options (such as date, time, and
currency) according to the locale you specify.
3. Select Done.
To set the date and time
1. On the Home screen, scroll to the Home panel and then press the
TRACKBALL.
2. Select Date and Time and then set the Time zone, Date, and Time.
3. Select Done.
Choosing how to be notified about events or actions
A profile is a group of settings that determine how your phone will alert you to
phone events such as incoming calls and notifications.
To change the current profile
1. On the Home screen, scroll to the Settings panel and then press the
TRACKBALL (option should be Profile).
2. Select the profile you want to use and then select Done.
Tip
To quickly change the profile, press and hold the HOME button to display the Quick
List, and choose a profile.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing your Phone 65
To edit a profile
1. On the Home screen, scroll to the Settings panel and then press the
TRACKBALL (option should Profile).
2. Select the profile to edit and then select Menu > Edit.
3. Modify the settings and select Done. To cancel without saving the changes,
select Cancel.
Tip
To revert to the default profile settings, select Menu > Reset to default.
To specify the sound for an event
1. On the Home panel, select Start > Settings > Sounds.
2. For the desired event, select a sound. Select None if you do not want to hear
a sound.
3. Select Done.
To set keyboard sound
1. On the Home screen, select Start > Settings > Sounds.
2. In Keypad control, select a sound. Select None if you do not want to hear
any sound while pressing a key.
3. Select Done.
To copy a sound to your phone
After a sound file is located on your phone, you can use it for a ring tone,
notification, or reminder. Sound files in either .wav, .mid, .wma, or .mp3 formats can
be used.
1. Connect the phone to your PC using a USB connection.
2. On your PC, copy the sound file you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
66 Managing your Phone
3. In Windows Mobile Device Center, select File Management > Browse the
contents of your device.
Or
In ActiveSync on your PC, click Explore and double-click My Windows
Mobile-Based Device.
4. Save the sound file on your phone by going to Application Data > Sounds,
and pasting the file into that folder.
To set an alarm
You can set 2 different alarms on your phone.
1. On the Home screen, scroll to the Home
panel and then press the TRACKBALL.
Alarm
icon
2. Select Alarm 1 or Alarm 2.
3.
Set the Alarm settings you want and then
select Done. An Alarm icon appears on the
Home panel of HTC Home.
Setting performance and maintenance options
To change accessibility settings
1. On the Home panel, select Start > Settings > Accessibility.
2. Select your preference for the following:
•
•
In System font size, set the size of the font that is displayed on the screen.
In Multipress time out, set the length of time between keypresses when
entering text in Multipress mode.
•
•
In Confirmation time out, set the delay before an unconfirmed action
times out.
In In-call alert volume, set the volume for incoming call or receiving new
message alerts while you are in a call.
3. Select Done.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing your Phone 67
To change power management settings
You can use Power Management to check the battery, and configure settings that
prolong battery life.
1. On the Home screen, select Start > Settings > Power > Power
Management.
You will see the current battery level under the Main battery item.
2. To optimize battery usage, you can adjust the following settings:
•
In Backlight brightness, set the backlight brightness to a lower level for
maximum battery life.
•
In Backlight time out on battery/AC and Display time out on battery/
AC, set the time when the backlight and display will turn off when the
phone is left idle.
•
•
In Adjust keypad backlight by light sensor, select whether to turn it on
or off. If this is turned on, the light sensor senses the dark conditions and
activates a backlight under the keyboard.
In When device is turned on, do not charge the battery when
connected to the PC, select Off if you want to charge the phone battery
when the phone is connected to the computer through USB.
3. Select Done.
To find the operating system version number
On the Home screen, select Start > Settings > About.
To find the phone specification
On the Home screen, select Start > Settings > Device Information.
To turn on and off error reporting
1. On the Home screen, select Start > Settings > Error Reporting.
2. Select Enable or Disable and select Done.
Download from Www.Somanuals.com. All Manuals Search And Download.
68 Managing your Phone
4.2 Copying and Managing Files
You can copy files between your phone and computer, or copy files to a storage
card installed on your phone. You can also efficiently manage your files and folders
using File Explorer.
To copy files using Windows Mobile Device Center/ActiveSync to the PC
1. Connect your phone to your PC.
2. In Windows Mobile Device Center, click File Management > Browse the
contents of your device.
Or
In ActiveSync on your PC, click Explore. This opens the Mobile Device folder
for your phone.
3. Browse your phone for files that you want to copy to your PC.
4. Select and copy the files [Ctrl + C] and then paste them [Ctrl+V] to the
destination folder in the PC.
Copying a file results in separate versions of a file on your phone and PC. Changes
made to one file will not affect the other since the files are not synchronized.
To manage files to your phone using File Explorer
File Explorer provides many easy-to-use features for file and folder management.
To start File Explorer
File Explorer lets you browse and manage the contents of your phone. The root
folder on the phone is named My Device, and contains the following folders: My
Documents, Program Files, Windows, and more.
1. Select Start > Applications > File Explorer.
2. Select a folder or file to open it.
3. To return to an upper level folder, select Up and select the folder.
To copy files to a storage card
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing your Phone 69
1. Make sure that the storage card is properly installed on your phone. Check
Chapter 1 for details.
2. Select Start > Applications > File Explorer and navigate to the appropriate
folder.
3. Select the file you want to copy, then select Menu > Edit > Copy.
4. Select Up until you get to the root folder (My Device) and then select Storage
Card in the list.
5. Select Menu > Edit > Paste.
4.3 Adding and Removing Programs
Before you purchase additional programs for your phone, make sure that they are
compatible for Windows Mobile® 6.1 Standard operating system. Also, before you
launch the program installer, check first whether the installer can directly run on
Windows Mobile or needs to be run on a computer.
To install a program directly on your phone
1. If the installer is a .cab file, directly download or copy it to your phone.
2. On your phone, open File Explorer and navigate to the installer file.
3. Select the file and then press the TRACKBALL to launch the installer.
4. Choose whether to install the program into the main memory or your storage
card, if you have the storage card inserted on your phone.
5. Wait for the installation to complete.
Note
You may be prompted to restart your phone after installation is completed.
Download from Www.Somanuals.com. All Manuals Search And Download.
70 Managing your Phone
To install a program from your computer
1. If the installer is an .exe file such as Setup.exe, most likely, the installer needs
to be run on a computer. Download or copy it to your computer.
2. Connect your phone to your computer using the USB cable, and then double-
click the installer file on your computer to launch the installer.
3. Follow the on-screen instructions on your computer and your phone to
complete the installation.
To remove a program
1. On the Home screen, select Start > Settings > Remove Programs.
2. Scroll to the program to remove and then select Menu > Remove.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing your Phone 71
4.4 Managing Memory
Checking memory status
To see how much memory is available
1. On the Home screen, select Start > Settings > About.
2. Scroll down to check the Available Memory.
To see how much storage space is available
1. On the Home screen, select Start > Settings > About.
2. Scroll down to check the Available Storage.
Using Task Manager
Task Manager allows you to view or stop the programs currently running on your
phone. To free up memory space, stop some or all running programs when not in
use.
To stop a running program in Task Manager
1. On the Home screen, select Start > Task
Manager.
Tip
You can also open Task Manager by
pressing and holding the Home key and
selecting Task Manager from the Quick
List.
2. On the Task Manger screen, select a program
on the list and then select End Task.
Tip
To stop all running programs, select Menu
> End All Tasks.
Select Menu to open a menu where you can change the view, sorting order, refresh
the screen, and more.
Download from Www.Somanuals.com. All Manuals Search And Download.
72 Managing your Phone
4.5 Protecting Your Phone
You can protect your phone from unauthorized use by requiring a PIN (personal
identification number) in order to make calls. Your default PIN is 1234. Additionally,
you can also lock the keypad/keyboard or the entire phone.
To enable the SIM PIN
1. On the Home screen, select Start > Settings > Security > Enable SIM PIN.
2. Enter your PIN, and select Done.
Note
To cancel without enabling the SIM PIN, select Cancel.
To disable the SIM PIN
1. On the Home screen, select Start > Settings > Security > Disable SIM PIN.
2. Enter your PIN, and select Done.
To change the SIM PIN
Be sure to write down your PIN. When the SIM PIN is enabled, you must provide this
PIN to unlock the phone.
1. Select Start > Settings > Security > Change SIM PIN.
2. In Old PIN, enter the current PIN.
3. Enter and confirm the new PIN, and select Done.
To lock the keyboard
Locking the keyboard turns off its functionality. This is a helpful feature if, for
example, the phone is turned on and in your pocket, and you want to prevent
accidental keypresses.
On the Home screen, press and hold for about 3 seconds. Once the keyboard is
locked, the left SOFT KEY label changes to Unlock.
Notes
•
You can also lock the phone by pressing and holding the HOME button to display
the Quick List, and select Lock.
•
You can still receive calls and make emergency calls when the keyboard are locked.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing your Phone 73
To unlock the keyboard
On the Home screen, select Unlock and then press
.
To enable the phone lock
1. On the Home screen, select Start > Settings > Security > Device lock.
2. Select Prompt if device unused for, then select the amount of time for the
phone to be inactive before automatically locking.
3. Select the Password type, then enter and confirm your password.
4. Select Done.
Note
Once you configure the phone lock settings, you can enable the phone lock from the
Quick List directly without configuring the settings again.
To disable the phone lock
Select Unlock and then enter the password you have set to unlock your phone.
To encrypt files on the microSD card
You can set your phone to encrypt files as they are saved on the storage card. Select
Start > Settings > Security > Encryption, and then select Encrypt files placed on
storage cards.
Notes
•
•
Encrypted files can only be read on the phone that encrypted them.
Encrypted files are opened just like other files, provided you are using the phone
that encrypted them. There is no separate step for you to take to read these files.
Important
If Encrypt files placed on storage cards is enabled, backup all files from the
storage card before using Clear Storage or updating the operating system.
Otherwise you will no longer be able to access the encrypted files on the
storage card. Use ActiveSync or Windows Mobile Device Center to transfer files
between your storage card and computer. After the procedure, copy your files
back to the storage card.
Download from Www.Somanuals.com. All Manuals Search And Download.
74 Managing your Phone
4.6 Restarting Your Phone
Restart your phone when a program is not performing properly or the phone is not
responding to any keypresses.
To restart the phone
1. Remove the battery.
2. Wait for three seconds, then reinsert the battery and turn on your phone.
WARNING!
If the phone is restarted while a program is running, any unsaved work will be
lost.
4.7 Resetting Your Phone
Resetting your phone will remove all the data from its memory and restore the
phone back to the factory default settings.
Note
If Encrypt files placed on storage cards is or was enabled before, then back up all
files from the storage card BEFORE using Clear Storage or updating the ROM system
software. Otherwise you will no longer be able to access the encrypted files on
the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files
between your storage card and computer. After the procedure, copy your files back to
the storage card.
WARNING!
Because all your data will be deleted, it is recommended that you back up your
data first before resetting your phone.
To reset your phone
1. Select Start > Device Management > Clear Storage.
2. Follow the on-screen instructions to reset the phone. The phone will restart
after it has been reset.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Organizing Phone Information
5.1 Contacts
Contacts is your address book and information storage for the people and
businesses you communicate with.
Tip
If you use Outlook on your computer, you can synchronize contacts between your
phone and computer.
Creating a contact on your phone
To create a new contact on your phone
1. On the Home panel, select Contacts > New > Outlook Contact.
To create a new contact on your SIM card, select SIM Contact. You can also
use SIM Manager to add contacts to your SIM card. For more information
about SIM Manager, see “SIM Manager”in this chapter.
2. Enter the contact details in the fields provided.
3. To easily identify the caller, you can assign a custom ring tone to each
Outlook contact. To assign a custom ring tone, scroll down to Custom ring
tone, and select the desired ring tone.
4. To assign a picture to a contact, scroll down to Picture, select Select a
picture and choose the picture you want.
5. Select Done.
Tip
If someone who is not in your list of contacts calls you, you can quickly create a
contact from Call History by selecting Menu > Save to Contacts.
Download from Www.Somanuals.com. All Manuals Search And Download.
76 Organizing Phone Information
Editing and calling a contact
To view and edit a contact information
1. On the Home panel, select Contacts.
2. Select the contact whose information you want to view or edit and select
Menu > Edit.
3. When finished making changes, select Done.
To call a contact from the contact list
1. On the Home panel, select Contacts.
2. Select the contact to call and press SEND. The contact’s default phone
number is dialed.
Tip
To call a phone number other than the default, select the contact, scroll to the
number you want to dial, and press SEND.
Finding a contact
To find a contact
1. On the Home panel, select Contacts.
2. Do one of the following:
•
Begin entering a name or phone number of the contact until the contact
is displayed. When you press a key, such as S, you find first and last names
that begin with S. The next key you press continues to narrow the search.
•
If you have assigned categories (e.g. Business) to your Outlook contacts,
you can filter the contact list by categories. In the contact list, select Menu
> Filter and then select a category. To show all contacts again, select All
Contacts.
•
If you have entered information under Company for your Outlook
contacts on your phone, you can quickly locate the contacts that work
for a specific company. In the contact list, select Menu > View By >
Company. Select the company to see the contacts who work there.
Note
If you are not in Name view, select Menu > View By > Name.
Download from Www.Somanuals.com. All Manuals Search And Download.
Organizing Phone Information 77
Sharing contact information
To beam contact information to another device via Bluetooth
1. On the Home panel, select Contacts and then select the contact whose
information you want to beam.
2. Select Menu > Send Contact > Beam.
3. Select the device where you want to beam the contact details to and select
Beam.
Note
Before you can beam, make sure Bluetooth is turned on and set to Visible mode on
your phone and the target mobile device. For more information, see “Bluetooth”in
Chapter 8.
To send contact information via a text message
1. On the Home panel, select Contacts and then select the contact whose
information you want to send.
2. Select Menu > Send Contact > Text/Multimedia. Select the contact
information that you want to send and select Done.
3. In the new text message, enter the mobile phone number of the person you
want to send the contact information to and select Send.
To send contact information via a multimedia message
1. On the Home panel, select Contacts.
2. Select a contact, then select Menu > Send as vCard.
3. Enter the recipient in To of the multimedia message, then select Send.
Download from Www.Somanuals.com. All Manuals Search And Download.
78 Organizing Phone Information
5.2 T-Mobile myFaves
T-Mobile® myFaves® helps you stay connected to the people who matter most in
your life. Simply choose any five U.S. phone numbers you call most often, on any
network, and have them displayed on your phone’s main screen.
For more information about the benefits of using T-Mobile myFaves and how to
subscribe to this service, visit http://www.t-mobile.com.
T-Mobile myFaves on the Home screen
Once you activate your subscription to T-Mobile
myFaves service, the myFaves panel will be
displayed on your phone’s Home screen. You
can add and call myFaves contacts by simply
selecting the circles in this panel. When adding
a myFaves contact, you can associate the
contact with a preset icon or the actual contact
photo.
Note
A notification icon appears on the myFaves
contact if there is a new message and/or
missed call from the contact.
Notification icons
Scroll right or left to select a myFaves contact and then press the TRACKBALL to
add, call, edit, or view a myFaves contact.
Adding myFaves contacts
To add myFaves contacts, you can create new contacts or add existing contacts
from your phone or SIM card.
1. Select an unassigned circle on the myFaves panel, and then choose whether
to create a new myFaves contact or select a stored contact.
Note If you select Create New, you need to fill in the Name and Number.
Download from Www.Somanuals.com. All Manuals Search And Download.
Organizing Phone Information 79
2. Under Icon, select Change icon to associate
the contact with an image. You can choose
to take a picture, download from the
T-Mobile site, or use an existing photo or a
preset icon.
Tip
You can crop and rotate photos before you
using them as myFaves icons. See “Rotating
and cropping a photo”for details.
3. Select a Ring tone for the contact.
4. Scroll down the screen, then select the Birthday and/or Anniversary
reminder check boxes according to your preference and enter the date.
5. Set a Reminder for each event. On the day of the reminder, a screen will open
letting you quickly call, send a text message, or buy a gift for the contact.
6. Select Save. On the Confirmation screen, select Yes.
8. Select OK on the two subsequent screens.
Note
Separate purchase/download charges may apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
80 Organizing Phone Information
Editing myFaves
1. On the myFaves panel, select the myFaves contact you want to edit and then
select Options.
2. In the Options menu, select one of the following:
•
•
•
•
Edit Profile. Modify the contact’s name, phone number, or photo.
Edit Email. Add or change the e-mail address of the selected contact.
Replace Contact. Replace with another contact.
Change Order. Set a contact as your primary myFaves contact. It will
appear as your first myFaves contact on the Home screen, and will also be
selected automatically whenever you launch the myFaves program.
•
myFaves Settings. Set myFaves options such as the display mode
and menu style. You can also download myFaves icons and refresh the
myFaves page. See “myFaves settings”for details.
Tip
You can also access the myFaves Settings option by selecting Start >
myFaves Settings from the Home screen.
Rotating and cropping a photo
1. Create a new myFaves contact or edit the profile of an existing myFaves
contact. See “Adding myFaves contacts”and “Editing myFaves”for details.
2. On the Profile screen, select Change Icon, or select the file name of the
previously assigned image.
3. Select Take Picture and take a photo of the contact, or select My Pictures
and choose a stored contact photo from your phone.
4. Select Options > Rotate to rotate the photo 90 degrees clockwise. Every time
you select Rotate, the image rotates 90 degrees clockwise.
Download from Www.Somanuals.com. All Manuals Search And Download.
Organizing Phone Information 81
5. Select Options > Zoom In or Zoom Out to select the best view of the
subject.
6. Use the TRACKBALL to position the crop guide to where you want to crop the
photo.
7. Select Crop. The photo is now set as the myFaves contact’s icon.
Calling a myFaves contact
You can place calls to your myFaves contacts directly from the myFaves panel.
1. On the myFaves panel, scroll to the myFaves contact you want to call.
2. Press SEND.
Sending messages to a myFaves contact
You can send text, multimedia or e-mail messages, instant messages, and audio
postcards to a myFaves contact. Separate charges may apply.
To select a type of message to send
1. On the myFaves panel, scroll to the desired
contact and then press the TRACKBALL.
2. Roll the TRACKBALL to scroll to the type of
message you want to send. For example,
scroll to the Send Message icon to send a
text message.
3. Press the TRACKBALL to open the relevant
screen for creating the message.
Download from Www.Somanuals.com. All Manuals Search And Download.
82 Organizing Phone Information
To view the activity log of the contact
Select Activity Log to open the Log screen and
view the complete list of calls and messages
between you and the myFaves contact. On the
Log screen, scroll to an item and then press the
TRACKBALL to read a text message, view/reply a
missed call, play a voice note, and more.
myFaves settings
To change your myFaves settings, select Start > myFaves Settings.
•
Select Menu style to change how the myFaves contact options are displayed.
You can choose either List or Circle.
Menu Style: Circle
Menu Style: List
•
•
•
Select myFaves Icons to let you set an icon for a current or new myFaves
contact. You can choose to take a picture, use icons or pictures in your phone,
or download icons from the T-Mobile Web site.
Select Refresh myFaves to synchronize with the myFaves server. Use this
feature when your myFaves details don’t refresh immediately after you edit
them.
Select About myFaves to go online and view details about the myFaves
service.
Download from Www.Somanuals.com. All Manuals Search And Download.
Organizing Phone Information 83
5.3 SIM Manager
SIM Manager allows you to view the contents of your SIM card and transfer
contacts from your SIM card to your phone and vice versa.
To create a contact on your SIM card
1. Select Start > Device Management > SIM Manager.
2. Select New and enter the contact name and phone number.
3. Select Save.
Tip
To change contact information on your SIM card, select a contact and edit it. After
modifying, select Save.
To copy SIM contacts to your phone
1. Select Start > Device Management > SIM Manager.
2. Select a SIM contact or select all SIM contacts by selecting Menu > Select All.
3. Select Menu > Save to Contacts.
To copy phone contacts to the SIM card
Only one phone number per contact name can be stored on a SIM card. If the
phone contact has multiple contact numbers, SIM Manager displays each contact
number separately and appends an indicator at the end of each contact type. By
default, /M, /W, and /H are appended to indicate mobile, work, and home phone
numbers respectively.
1. On the SIM Manager screen, select Menu > Contacts to SIM.
2. Select the check boxes of the contact’s phone numbers that you want to copy
to your SIM card, and then select Save.
Download from Www.Somanuals.com. All Manuals Search And Download.
84 Organizing Phone Information
To display your phone number in SIM Manager
When your phone
number is stored
on the SIM card,
it will appear on
the SIM Manager
screen.
1. On the SIM Manager screen,
select Menu > Tools > List
of Own Numbers and then
select Edit.
2. Change the name, if desired,
then enter your mobile phone
number.
3. Select Save.
5.4 Calendar
Use Calendar to schedule appointments, including meetings and other events.
Note
If you use Outlook on your computer, you can synchronize appointments between
your phone and computer.
Creating and viewing appointments
To schedule an appointment
1. On the Home screen, select Start > Calendar.
2. On the Calendar screen, select Menu > New Appointment.
3. Enter information about the appointment.
•
•
To schedule an all-day event, in End time, select All day event.
To make the appointment recurring, select Occurs.
4. Select Done.
Note
All-day events do not occupy blocks of time in Calendar; instead, they appear in
banners at the top of the calendar.
Download from Www.Somanuals.com. All Manuals Search And Download.
Organizing Phone Information 85
To view your appointments
You can view your appointments in three views: Month, Week, and Agenda.
On the Calendar screen, press the left SOFT KEY to change to the view indicated
above the button, or select Menu to choose from the three types of views.
Highlighted areas
represent time segments
that have scheduled
appointments.
Select an item
to view the
details of the
appointment.
Select to change the view.
Agenda View
icon indicates that the scheduled appointment has a
An appointment with the
conflict with one or more existing appointments.
To customize the Calendar
1. On the Calendar screen, select Menu > Tools > Options.
2. Scroll through the available settings and set your desired default options.
3. Select Done.
Sending a meeting request
You can send meeting requests via e-mail to persons that use Outlook on their
computer or phone.
1. On the Home screen, select Start > Calendar.
2. Schedule a new appointment (or open an existing appointment and select
Menu > Edit) and then scroll down to Attendees and select No Attendees.
Select Add Required Attendee or Add Optional Attendee to add the
contacts you want to send the meeting request to.
Download from Www.Somanuals.com. All Manuals Search And Download.
86 Organizing Phone Information
3. Choose the contacts you want to send the meeting request to and select
Select.
4. On the New Appointment screen, select Done. The meeting request is sent.
Notes
•
You can only specify if an attendee is required or optional if your phone is
connected to a Microsoft Exchange 2007 server. Otherwise, all attendees are
designated as required. For more information, see Chapter 7.
•
•
To remove an attendee from the list, select the attendee and select Menu >
Remove Attendee.
When attendees accept your meeting request, the meeting is automatically
added to their schedules. When their response is sent back to you, your calendar is
updated as well.
Sending a calendar appointment
You can send a calendar appointment in a multimedia message to another phone.
1. On the Home screen, select Start > Calendar.
2. Select an appointment, and then select Menu > Send as vCalendar.
3. Enter the recipient in the To line of the multimedia message, and then
select Send.
Download from Www.Somanuals.com. All Manuals Search And Download.
Organizing Phone Information 87
5.5 Tasks
Use the Tasks program to keep track of things you need to do.
To create a task
1. On the Home screen, select Start > Applications >Tasks.
2. Select Menu > New Task.
3. Enter the necessary task information and select Done.
•
•
Set a Priority for the task. This item can be referenced when sorting tasks.
Enter a Start date and Due date if the task starts and ends at a specific
time.
•
•
Enter a Reminder if you want to be notified if the task is due.
Enter the Categories (you can set more than one) that best describes the
task. This item can be referenced when filtering tasks.
Notes
•
•
You can synchronize information on your phone with your computer to keep your
task list up to date in both locations.
If you create a new task with a reminder on your computer and then synchronize
tasks with your phone, the reminder will play at the time that was set on your
computer.
To locate a task
1. On the Home screen, select Start > Applications >Tasks.
2. In the task list, do one of the following:
•
•
To sort the list, select Menu > Sort by, and select a sort option.
To filter the list by category, select Menu > Filter, and select the category
you want displayed.
To mark a task as completed
1. On the Home screen, select Start > Applications >Tasks.
2. Select the task, and select Complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
88 Organizing Phone Information
5.6 Voice Recorder
Use Voice Recorder to create short voice notes. Voice notes are included in the All
Notes list and are named consecutively (Recording1, Recording2, and so on).
To create a voice note
1. On the Home screen, select Start > Applications >Voice Recorder.
2. Hold the phone’s microphone near your mouth.
3. Select Record and say your voice note.
4. Select Stop to stop recording a voice note.
To delete a voice note
1. On the Home screen, select Start > Applications >Voice Recorder.
2. Select the voice note to delete.
3. Select Menu > Delete.
4. Select Yes.
To listen to a voice note
1. On the Home screen, select Start > Applications >Voice Recorder.
2. Select the voice note to play, and press the TRACKBALL.
To use a voice note as a ring tone
1. On the Home screen, select Start > Applications >Voice Recorder.
2. Select the voice note, and select Menu > Set As Ringtone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
Exchanging Messages
6.1 Browsing Messages on the Home Screen
When you receive new text, multimedia or e-mail messages, snippets of the
messages are displayed in the Messages and Email panels of the Home screen.
Simply scroll up or down to the relevant panel where the new messages are.
Scroll right or left to browses through the message snippets, and then press the
TRACKBALL to select the displayed snippet and read its complete message.
Text/multimedia
message snippet
E-mail message
snippet
Download from Www.Somanuals.com. All Manuals Search And Download.
90 Exchanging Messages
6.2 Messaging
Messaging is where all your messaging accounts are located, which include your
text messages, multimedia messages, and e-mail accounts.
To access your message accounts
Select Start > Messaging and then select the
account you want to open. While in a selected
account’s message list, select Menu > Tools >
Switch Accounts to switch to another message
account.
Tip
You can also press
Messaging.
to quickly access
To change message account settings
•
On the Messaging screen, select the message account whose settings you
want to change and then select Menu > Settings.
•
On an account’s message list, select Menu > Tools > Options.
6.3 Text Messages
Send short text messages to your contacts.
Composing and sending text messages
To compose and send a text message
1. On the Home screen, scroll to the Messages panel and press the TRACKBALL.
Note If you have unread messages, you will need to scroll right until you see New
Message before pressing the TRACKBALL.
2. Select Text message.
3. Enter the mobile phone number of one or more recipients, separating them
with a semicolon (;).
Download from Www.Somanuals.com. All Manuals Search And Download.
Exchanging Messages 91
To access phone numbers from Contacts, in To, select Menu > Add Recipient.
Select a contact from the list and press the TRACKBALL.
4. Enter your message. You can enter up to 160 characters in one message.
5. Select Send.
Tip
Notes
To cancel the text message, select Menu > Cancel Message.
•
•
Separate charges may apply.
Text messages can only be sent if your phone is connected to a GSM/EDGE or
HSDPA/WCDMA network.
Copying and pasting text
Copy words or lines of text in your messages or e-mail and then paste them on the
current or new message.
To copy text from a message or e-mail that is being written
1. In the message that is being written, position the cursor where you want to
start copying from.
2. Select Menu > Copy/Paste > Select Text.
3. Scroll left/right with the TRACKBALL until you have selected the text you want
to copy and then select Copy.
To copy text from a message or e-mail
1. Open the message or e-mail where you want
to copy text from.
2. Select Menu > Copy/Paste > Select Text.
3. Use the TRACKBALL to position the cursor
where you want to start copying and then
select Select.
Tip
Select Menu > Select All to select the
whole message.
Download from Www.Somanuals.com. All Manuals Search And Download.
92 Exchanging Messages
4. Scroll left/right with the TRACKBALL until you have selected the text you want
to copy and then select Copy.
Tip
Scroll up or down to select a whole line of text.
To paste text on a text message or e-mail
In a text message or e-mail, position the cursor where you want to paste the text
and then select Menu > Copy/Paste > Paste.
Managing text messages
Text messages that are sent to and received from a contact (or number) are
grouped as a single thread in your inbox. Threaded SMS lets you see exchanged
messages (similar to a chat program) with a contact on the screen.
To reply to a text message
1. In the Text/Multimedia inbox, select a message thread to open it.
2. At the bottom of the screen, enter your reply message and select Send.
Enter your reply
message here
Download from Www.Somanuals.com. All Manuals Search And Download.
Exchanging Messages 93
To delete a message in the thread
1. In the Text/Multimedia inbox, select a message thread to open it.
2. Scroll up or down to select a message in the thread that you want to delete.
3. Select Menu > Delete.
To delete all messages in a thread
1. In the Text/Multimedia inbox, select a message thread.
2. Select Menu > Delete.
To reply to a text message with a multimedia message
You can reply to a text message in a thread using a multimedia message.
1. In the Text/Multimedia inbox, select a message thread to open it.
2. Select Menu > Insert, and then in the menu, select the item you want to
insert: Picture/Video, Audio or Attachment.
Tip
Select Menu > Advanced Composer after adding a picture/video, audio, or
attachment to compose a multimedia message complete with text, emoticons,
media and attachments.
3. Select Send.
Tip
You can also insert a vCard or vCalendar in your multimedia message.
Download from Www.Somanuals.com. All Manuals Search And Download.
94 Exchanging Messages
6.4 Multimedia Messages
Creating and sending multimedia messages to your friends and family is fun
and easy.
Creating and sending multimedia messages
You can compose multimedia messages in a combination of various slides, where
each slide can consist of a photo, audio or video clip, and/or text.
Notes
•
•
Multimedia messaging is a charged service. In order to use multimedia messaging
successfully, this has to be provisioned on your mobile account. Please contact
T-Mobile to have this provisioned as part of your calling plan.
Make sure the size of the multimedia message is within the limits of T-Mobile while
sending it to another mobile phone user or to an e-mail address.
To compose a multimedia message
1. On the Home screen, select Start >
Messaging > Text/Multimedia.
2. Select Menu > New > Multimedia.
3. In To, enter the recipient’s phone number or
e-mail address.
4. In Subject, enter a subject for your message.
5. Select Insert Picture/Video to select a photo or video clip from the Select
Media screen and insert it.
To capture a new photo, select the Capture Image icon (
Menu > Capture Image.
) or select
To record a new video, select the Capture Video icon (
Capture Video.
) or select Menu >
5. Select Insert Text to enter text for your multimedia message.
To insert predefined text or emoticons, select Menu > Insert My Text or
Insert Emoticon.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exchanging Messages 95
6. Select Insert Audio to insert an audio clip. Select an audio clip on the Select
Audio screen. To record a new audio clip, select Menu > Capture Audio.
7. Select Send to send the message.
Tip
After inserting a multimedia message element, scroll right to add a new slide.
Notes
•
•
To send a copy of this message to others, highlight the To field and scroll up to
display the Cc and Bcc fields.
To remove the photo, text, or audio, select the item and press the BACK key (
).
Viewing and replying to multimedia messages
To view a multimedia message
You can view multimedia messages in several ways.
•
•
•
On the message thread, select the multimedia message. Multimedia
messages have the icon.
On the message thread, select the multimedia message. Select Pause or
Menu > Stop to pause or stop the playback of the message.
Select Menu > Contents View to see a list of files included in the message. To
open a file, select it and select Open or Play. To save a file, select it, and select
Menu > Save File, Menu > Save Audio or Video, or Menu > Save Photo.
•
View each slide included in the message by scrolling right or left, or by
selecting Menu > Next or Previous.
To reply to a multimedia message
1. In the Text/Multimedia inbox, scroll up or down to select the multimedia
message and select it.
2. In the threaded message, multimedia messages have the
icon. Select this
icon to open and view an multimedia message.
3. After viewing the multimedia message, select Menu > Reply > via MMS to
reply with an multimedia message or select Menu > Reply > via SMS to reply
with a text message.
Download from Www.Somanuals.com. All Manuals Search And Download.
96 Exchanging Messages
To block a phone number from sending you multimedia messages
If you do not want to receive multimedia messages from a particular sender, you
can add the sender’s phone number to the MMS Blacklist.
1. When you receive a new multimedia message, open and view the message.
2. To avoid receiving multimedia messages from this sender next time, select
Menu > Show > Message Detail.
3. On the Message Detail screen, select Menu > Show Contact Details.
4. Select Menu > Save to Blacklist.
5. Select Done.
Tip
To unblock a phone number and allow the sender to send you multimedia messages,
remove the number from the Blacklist. Select Start > Settings > MMS Setting >
Menu > Edit Blacklist. In the Blacklist screen, select the contact and select Menu >
Delete.
6.5 Audio Postcards
Quickly add a voice recording to captured photos and then send them to family
and friends as audio postcards.
Note
Separate charges may apply to send/receive domestic/international audio postcards.
To create and send an audio postcard
1. On the Home screen, select Start > Send
Audio Postcard.
2. Scroll left/right to select the template you
want to use.
3. Point the camera at your subject and then
press the TRACKBALL to take the photo.
Note Depending on the template selected, you
may need to take more than one shot.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exchanging Messages 97
4. On the Review screen, select
. The Audio Postcard screen opens.
5. Hold the phone’s microphone near your mouth and select Record.
6. After recording your voice message, select Stop.
Note Select Menu > Play to play back the recorded voice clip. If you are not satisfied
with the recording, select Menu > Record Again.
7. Select Send.
8. In the To field, enter the recipient’s mobile phone number or e-mail address.
You can also press the TRACKBALL to select a contact from your Contacts list.
Tips • If you opened Audio Postcards from myFaves, selecting Send will automatically
send the audio postcard to the selected myFaves contact.
• You can send the audio postcard to multiple recipients. Separate recipients
with a semicolon in the To field.
9. Enter the Subject and then select Send.
Download from Www.Somanuals.com. All Manuals Search And Download.
98 Exchanging Messages
6.6 Instant Messaging
T-Mobile Instant Messaging provides you with access to popular instant
messaging (IM) communities, including AOL® Instant Messenger (AIM®), Google
Talk™, Windows Live™ Messenger, MySpace®, and Yahoo!® Messenger. Instant
Messaging enables you to sign in to two or more communities at the same time.
1. Select Start > Instant Messaging.
2. Scroll left/right and select the TRACKBALL
to select a community. Select Yes to enable
the community when prompted.
3. Enter the required sign-in information for
the selected community, such as user name
or password, and then select Sign In.
Note The information required to sign in will
vary depending on the instant messaging
community you are accessing.
4. Selected communities are displayed as tabs
on the screen.
Note You can add or remove communites later
by selecting Options > Select Services
and then selecting or clearing the
community's check box.
5. Scroll left/right to select a community’s tab.
You can sign into two or more communities
simultaneously.
The instant messaging screen for your selected community will then be displayed,
and you can start chatting online with your friends or family.
For more information on using Instant Messaging, select Options > Help and then
choose a help topic.
Note
Separate charges apply to send/receive instant messages.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exchanging Messages 99
6.7 Set Up E-Mail
T-Mobile’s Set Up E-Mail provides you unlimited access to your work and personal
e-mail. Instantly access your e-mail from AOL® AIM®, Yahoo!® , Gmail™, Microsoft®
Exchange and many more, including any POP3 or IMAP4 e-mail server.
Note
Restrictions may apply. Contact your e-mail provider for additional information.
To add e-mail accounts using Set Up E-mail
1. Press the HOME key to return to the Home screen.
2. If this is your first time to set up an e-mail account, scroll to the Email panel
and select Set Up Email.
Otherwise, select Start > Set Up E-mail.
3. On the Select Account screen, select the type of e-mail account you want to
add to your phone.
Tip Select
if you need more help in setting up an e-mail account.
To set up AOL/AIM® Mail, Yahoo!® Mail, or Gmail™
Select AOL/AIM Mail, Yahoo! Mail, or Gmail and then simply enter your e-mail
address and password.
Download from Www.Somanuals.com. All Manuals Search And Download.
100 Exchanging Messages
To set up Windows Live Mail
Select Windows Live Mail, and then sign in using your Windows Live ID. See
Chapter 8 for details.
To set up Outlook E-mail
1. On the Select Account screen, select Outlook Setup.
2. To send and receive personal e-mail on your phone:
•
Check if the synchronization software has been installed on your
computer and a sync partnership has been created with your phone. If
these have been done, then just connect your phone to your computer to
send and receive Outlook E-mail messages.
If you have not yet installed the synchronization software nor created a
partnership, please do so by following the procedures in Chapter 3.
3. To set up your company e-mail account on your phone:
•
Set up your phone to synchronize via a wireless network or over-the-air
connection with your company’s Exchange Server. For more information
about synchronizing with the Exchange Server, see Chapter 7.
To set up a POP3 or IMAP4 e-mail account
If you have an e-mail account from an ISP or other Web-based accounts such as
Comcast®, add them as POP3 or IMAP4 accounts on your device.
1. On the Select Account screen, select Other.
2. Enter your e-mail address and password, then select Next.
Note If your e-mail provider settings cannot be found, you will be prompted to enter
settings such as the incoming and outgoing server names. Ask your e-mail
service provider about these settings.
To access your e-mail accounts
Select Start > Messaging. You will see your e-mail accounts in the Messaging
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exchanging Messages 101
To set up a custom domain e-mail
When you are using an e-mail domain name that is hosted by a different e-mail
provider (for example, your e-mail address may be [email protected] but E-
mail.com hosts the e-mail account and provides e-mail services), select the Custom
Domain option in the E-mail Setup wizard to set up your e-mail account on your
phone.
1. Select Start > Messaging > Setup E-mail.
2. Enter your E-mail address and the Password for your e-mail account and
select the Save password option. Select Next.
3. Clear the Try to get e-mail settings automatically from the Internet check
box and then select Next.
4. In Your e-mail provider, select Custom domain and then select Next.
5. Enter the domain of your e-mail provider and then select Next.
6. The E-mail Setup wizard then tries to find the e-mail provider settings on your
phone or from the Internet. If the settings are found, it shows a successful
message. Select Next.
7. Enter Your name and the Account display name and then select Next.
Note If the E-mail Setup wizard was unsuccessful in finding the settings, you will be
prompted to enter e-mail server settings on the subsequent screens.
8. In the Automatic Send/Receive list, choose how often you want e-mail
messages to be automatically sent and downloaded on your phone.
Note Select Review all download settings to select download options, set the e-mail
format as HTML or plain text, and more. For more information, see “To customize
download and format settings for POP3/IMAP4 e-mail."
9. Select Finish.
Download from Www.Somanuals.com. All Manuals Search And Download.
102 Exchanging Messages
6.8 E-mail
After setting up e-mail accounts on your phone, you can start sending and
receiving e-mail messages.
Note
Separate charges may apply to send/receive domestic/international e-mail.
Creating and replying to e-mail
To compose and send an e-mail
1. Select Start > Messaging then select an e-mail account.
2. Select Menu > New.
3. Enter the e-mail address of one or more recipients, separating them with a
semicolon. To access e-mail addresses stored in Contacts, in To, select Menu
> Add Recipient. Select a contact from the list and press the TRACKBALL.
4. Enter a subject and compose your message. To quickly add common
messages, select Menu > My Text and select a desired message.
5. Select Send.
Tips
•
•
To set the priority, select Menu > Message Options.
If you are working offline, e-mail messages are moved to the Outbox folder and
will be sent the next time you connect.
To add an attachment to an e-mail
1. In the message that you are composing, select Menu > Insert and select the
item you want to attach: Picture, Voice Note, or File.
2. Select the file you want to attach, or record a voice note.
Viewing and replying to e-mail
To use keyboard shortcuts
When in an e-mail account, press and then press and hold to open a shortcut
list of often-used commands. Press and then press and hold the shortcut key to
execute the command.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exchanging Messages 103
To filter the Inbox message list
Filter the e-mail messages in your Inbox to only
display the e-mails that contain the sender or
e-mail subject you are searching for.
Enter the sender name or e-mail subject you
want to look for using the keypad or keyboard.
As you press keys, the list narrows down to the
conditions you set.
For example, pressing “J”then “A”narrows the list
to only the e-mail messages that contain sender
names and e-mail subjects that start with “JA.”
To download a complete e-mail
By default, each e-mail in the inbox on your phone contains only the first few
kilobytes of the message. When you open an e-mail, it displays only the headers and
part of the message. You must download the whole e-mail to view the complete
content.
To download a complete e-mail message, open the e-mail and then do one of the
following:
•
Scroll down to the end of the message and select Get the rest of this
message .
•
Select Menu > Download Message.
Note
The Fetch Mail feature, which is available for POP3 and IMAP4 Internet e-mail
accounts, downloads an entire e-mail without the need for you to perform a full
synchronization. This limits the download to just the e-mail message that you want
and helps save data cost. Fetch Mail is also available for Outlook E-mail. See “Instant
download through Fetch Mail”in Chapter 7 for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
104 Exchanging Messages
To download an attachment
In an open message with an attachment to download, select the attachment. If
there is more than one attachment, select the other attachments to download
them. You can directly open the file in the associated program after you download
them by selecting the attachment again.
To reply to or forward an e-mail
1. Open the message and select Menu > Reply > Reply, Reply All, or Forward.
2. Enter your response. To quickly add common messages, select Menu > My
Text and choose a desired message.
3. Select Send.
Notes
•
You can receive and view HTML e-mail from any type of e-mail account. The
HTML format is retained, without layout shifting or resizing. HTML e-mail support
in Outlook Mobile is available only if you are synchronizing your phone with
Microsoft Exchange Server 2007.
•
To see more header information when reading an e-mail message, scroll up.
•
To always include the original message from the list view, from the Outlook E-mail
screen select Menu > Tools > Options > Sending and then select the Include
copy of original message when replying to e-mail check box.
•
In the Outlook E-mail account, you will send less data if you do not edit the original
message. This may reduce data transfer costs based on your rate plan.
Synchronizing e-mail
Synchronizing e-mail ensures that new e-mail messages are downloaded to the
phone Inbox folder, e-mail messages in the Outbox folder are sent, and e-mail
messages deleted from the server are removed from your phone. The manner in
which you synchronize e-mail depends on the type of e-mail account you have.
To automatically synchronize an Outlook e-mail account
1. Connect your phone to your computer through USB or Bluetooth.
Otherwise, connect through Wi-Fi or a data connection if you are synchronizing
Outlook e-mail with the Exchange Server. For more information, see Chapter 7.
2. Synchronization automatically begins, and your phone sends and receives
Outlook e-mail.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exchanging Messages 105
To manually synchronize your Outlook or Internet e-mail account
1. Select your e-mail account.
2. Select Menu > Send/Receive.
Customizing e-mail settings
To change the download size and format for Outlook e-mail
1. Disconnect your phone from the computer.
2. Select Start > Applications > ActiveSync.
3. Select Menu > Options, select E-mail, then select Settings.
4. On the E-mail Sync Options screen, set the Download size limit and
Message format.
5. Select Done.
To change the download size and format for POP3/IMAP4 e-mail
1. On the POP3/IMAP4 e-mail message list, select Menu > Tools > Options >
Account Settings > Download Size Settings.
2. Configure the Message format and Message download limit settings.
3. Select Done.
To customize download and format settings for POP3/IMAP4 e-mail
Before you select Finish when setting up your Internet e-mail account or custom
domain e-mail, you can select Review all download settings to choose download
options, message format, and other settings. Select Advanced Settings for further
options.
Options
Description
Automatic Send/Receive You can select a time interval for connecting to the Internet
automatically to send and receive messages.
Download messages
Set the number of days of messages that you want to be
downloaded to your phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
106 Exchanging Messages
Options
Description
Send/receive when I
click Send
By default, messages are immediately delivered when you select
Send. If you prefer to save outgoing messages to the Outbox
folder first, clear the check box. (In this case, you will need to
manually send messages by selecting Menu > Send/Receive).
Use automatic send/
receive schedule when
roaming
This allows your phone to data roam when there is a set time
interval for connecting to the Internet automatically. Since this
may result in higher connection costs, you may want to leave the
check box cleared.
When deleting messages Choose whether to delete messages from the mail server when
you delete them on your phone.
Message format
Select HTML or Plain Text.
Message download limit Select the e-mail download size. If you have large volumes of e-
mail, use a lower size or select to download headers only.
Download attachments
Set your preference when there is an e-mail attachment
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
Working with Company E-mail and
Meeting Appointments
7.1 Synchronizing with Your Company E-mail Server
Synchronize your phone with your company’s Microsoft Exchange Server to keep
you connected with your e-mail messages, contacts, calendar appointments, and
other information.
Setting up a company e-mail server connection
Use your phone to access your company e-mail by setting up an Exchange Server
connection. You can get the company e-mail server information from your network
administrator:
1. On the Home screen, select Start > Set Up E-mail.
2. On the Select Account screen, select Outlook Setup.
3. ActiveSync then opens. Select Menu > Add Server Source.
4. Enter your e-mail address, clear the Attempt to detect Exchange Server
Settings automatically check box, and then select Next.
5. In Server address, enter the Exchange Server address, and then select Next.
6. Enter your user name, password and domain, and then select Next.
7. Select the items that you want to sync with the Exchange Server.
Tips
•
To change synchronization settings of an information item, for example,
E-mail, select the item, and then select Menu > Settings.
•
Select Menu > Advanced to change the rules for resolving synchronization
conflicts.
8. Select Finish
Download from Www.Somanuals.com. All Manuals Search And Download.
108 Working with Company E-mail and Meeting Appointments
Notes
•
If you synchronized e-mail messages with your computer before, you need to
disable it first before you can choose to sync e-mail with the Exchange Server.
Open ActiveSync on your phone, select Menu > Options, and then clear the
E-mail check box under the Windows PC item.
•
To change Exchange Server settings, open ActiveSync on your phone and select
Menu > Configure Server.
Starting synchronization
Before you start synchronizing with the Exchange Server, make sure your phone
has been set up with a data connection to the Internet or Wi-Fi so that you can
synchronize wirelessly. See Chapter 8 for details.
After you finish setting up an Exchange Server connection, your phone
automatically starts synchronization. You can manually start synchronization
anytime by selecting Sync in ActiveSync.
Note
If you connect your phone to your office computer via a USB or Bluetooth connection,
you can use this connection to the computer to “pass through”to the network and
download Outlook e-mail messages and other information to your phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with Company E-mail and Meeting Appointments 109
7.2 Working with Company E-mail
Your phone gives you instant access to your company e-mail messages and lets
you manage your messages easier. Messaging features such as Direct Push, Fetch
Mail, and Filtering messages are just some of the tools you can use to manage your
e-mail messages.
Note
Some messaging features depend on the Microsoft Exchange Server version used. Check
with your network administrator for the availability of Exchange Server features.
Automatic synchronization through Direct Push
Direct Push technology (push e-mail feature) enables you to receive new e-mail
messages on your phone as soon as they arrive in your Inbox on the Exchange Server.
With this feature, items such as contacts, calendar and tasks are also immediately
updated onto your phone when these items have been changed or new entries have
been added on the Exchange Server. To make Direct Push work, you need to have a
Wi-Fi or data connection on your phone. You need to perform a full synchronization
between your phone and the Exchange Server first before Direct Push can be
enabled.
Requirement
The Direct Push feature works for your phone only if your company is using
Microsoft Exchange Server 2003 Service Pack 2 (SP2) with Exchange
ActiveSync or higher version.
To enable Direct Push via Comm Manager
1. Select Start > Comm Manager.
2. On the Comm Manager screen, select the Microsoft Direct Push option.
indicates that you will receive e-mail messages as they arrive.
indicates that you need to manually retrieve your e-mail messages.
To enable Direct Push via ActiveSync
1. In ActiveSync on your phone, select Menu > Schedule.
2. Select As items arrive in the Peak times and Off-peak times boxes.
Download from Www.Somanuals.com. All Manuals Search And Download.
110 Working with Company E-mail and Meeting Appointments
Scheduled synchronization
If you do not want to use Direct Push, you can set a regular schedule for
synchronizing Outlook e-mail and information.
1. In ActiveSync on your phone, select Menu > Schedule.
2. Select a shorter time interval in the Peak times box for you to be able to
receive e-mail more frequently.
3. Select a longer interval in the Off-peak times box.
Tip
Select Menu > Peak Times to set the peak and off-peak times.
Instant download through Fetch Mail
Fetch Mail downloads an entire e-mail immediately without the need for you to
perform a full Send/Receive action.
Requirement
Fetch Mail works for your phone only if your company is using Microsoft
Exchange Server 2007 or higher.
1. Select Start > Messaging > Outlook E-mail.
2. Select an e-mail message to open it.
3. By default, only the first few kilobytes of the message is shown. To download
the whole e-mail, scroll to the bottom of the message then select Get the
rest of this message.
4. A “Downloading message”status appears. Wait for the remainder of the
message body to be downloaded.
Notes
•
For information about changing e-mail sync options such as setting the download
size for e-mail, see “Customizing e-mail settings”in Chapter 6.
•
When you receive an e-mail that contains a link to a document such as a PDF or
Microsoft Office document located on SharePoint or an internal file server, you can
select the link to view the document on your phone. You can view the document
only if you have a Microsoft Outlook account that synchronizes with Microsoft
Exchange Server 2007 or later. Exchange Server must also be set up to allow access
to SharePoint document libraries or internal file servers.
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with Company E-mail and Meeting Appointments 111
Searching for e-mail on the Exchange Server
You can access e-mail messages that are not available on your phone by searching
your Microsoft Exchange Server mailbox. The search results will be downloaded
and displayed in a Search Results folder.
Requirement
Your company must be using Microsoft Exchange Server 2007 or higher.
1. Select Start > Messaging > Outlook E-mail.
2. Select Menu > Tools > Search Server.
3. In the Look for text box, enter the search
keyword.
4. Choose the Date range of messages to
search from and where to search in Look in.
5. Select Search.
Out-of-office auto-reply
Outlook Mobile allows you to retrieve and change your out-of-office status. Just
like desktop Outlook E-mail, Outlook Mobile automatically sends an auto-reply
message when you’re not available.
Requirement
Your company must be using Microsoft Exchange Server 2007 or higher.
To send out-of-office auto-reply messages
1. Select Start > Messaging > Outlook E-mail.
2. Select Menu > Tools > Out of Office.
3. From the I am currently list, select Out of the Office.
4. Enter your auto-reply message then select Done.
Download from Www.Somanuals.com. All Manuals Search And Download.
112 Working with Company E-mail and Meeting Appointments
Flagging your messages
Flags serve as a reminder to yourself to follow-up on important issues or requests
that are indicated in the messages.
Requirement
Flags are enabled only if e-mail messages are synchronized with Microsoft
Exchange Server 2007 or higher. Flags are disabled or hidden if e-mail
messages are synchronized with earlier versions of Microsoft Exchange
Server.
To flag or unflag a message
1. Select Start > Messaging > Outlook E-mail.
2. Select a message, or open a message.
3. Select Menu > Follow Up and select one of the following options:
•
Set Flag. Mark the message with a red
flag to indicate that it needs follow up.
•
Complete Flag. Mark the message
with a check mark to indicate that the
issue or request in the e-mail is already
completed.
•
Clear Flag. Remove the flag to unmark
the message.
Note
E-mail message reminders are displayed on your phone if the messages are flagged
with reminders and synchronized from the Exchange Server.
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with Company E-mail and Meeting Appointments 113
7.3 Managing Meeting Requests
When you schedule and send meeting requests from your phone, you can invite
attendees to your meeting and check their status to know their availability.
When you receive a meeting request, you can reply by accepting or declining
the request. The meeting request also clearly indicates whether or not there are
conflicting or adjacent meetings.
Requirement
Your company must be using Microsoft Exchange Server 2007 or higher.
To view the list of meeting participants
1. Select Start > Calendar.
2. Select a meeting request that you sent and then select Attendees. The
required and optional attendees will be listed. Icons indicating whether each
attendee has accepted or declined the meeting request will also be displayed.
Note
To see the icon indicators in the attendees list, make sure Calendar is synchronized
with the Exchange Server.
To reply to a meeting request
1. When there’s an incoming e-mail with a meeting request, a notification
message will be displayed on your phone’s Home screen. Scroll to the Email
panel and select it.
2. In the Outlook message list, select the e-mail to open it.
3. Select Accept to reply and accept the meeting request, or select Menu >
Decline if you cannot attend the meeting.
Tips
•
Before responding, you can check your availability during the time of the
requested meeting by selecting View your calendar.
•
If the time of the meeting conflicts with your other appointments, a
“Scheduling Conflict”status appears on top of the e-mail.
Download from Www.Somanuals.com. All Manuals Search And Download.
114 Working with Company E-mail and Meeting Appointments
4. Choose whether or not to edit the response e-mail before sending and then
select Done:
Note
If you accepted the meeting request, it will automatically be added as an
appointment in Calendar on your phone.
7.4 Finding Contacts in the Company Directory
In addition to having contacts on your phone, you can access contact information
from your organization’s Company Directory.
Requirement
Access to the Company Directory is available only if your organization is
running Microsoft Exchange Server 2003 SP2 or higher, and you have
completed your first synchronization with the Exchange Server.
1. Synchronize with Exchange Server if you have never done so.
2. Do any of the following:
•
•
In Contacts, select Menu > Company Directory.
In a new e-mail, select the To box and then select Company Directory at
the top of the list or select Menu > Company Directory.
•
In a new meeting request using Calendar, scroll to Attendees and select
No attendees > Add Required Attendee or Add Optional Attendee and
then select Company Directory at the top of the list.
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with Company E-mail and Meeting Appointments 115
3. Enter the part or full contact name and select Search. In the search results list,
select a contact to select it.
Notes
•
•
You can save a contact from the Company Directory to your phone by selecting
the contact and then selecting Menu > Save to Contacts.
You can search on the following information as long as that information is included
in your organization’s Company Directory: First name, Last name, E-mail name,
Display name, E-mail address, or Office location.
7.5 E-mail Security
Windows Mobile on your phone protects your Outlook e-mail messages through
Secure/Multipurpose Internet Mail Extension (S/MIME), which allows you to digitally
sign and encrypt your messages.
Requirement
S/MIME encryption and digital signatures for Windows Mobile-based
phones are available only with Exchange Server 2003 SP2 or a later
version that supports S/MIME. If you are not using one of these products, or
have not yet synchronized, these options are unavailable.
Note
You can encrypt a message with or without a certificate. However, to decrypt and
read an encrypted message, you need a valid certificate.
Download from Www.Somanuals.com. All Manuals Search And Download.
116 Working with Company E-mail and Meeting Appointments
To individually sign and encrypt a new message
1. Select Start > Messaging > Outlook E-mail.
2. Select Menu > New to create a new message.
3. Select Menu > Message Options.
4. From the Security list, select whether to encrypt only, sign the message only,
or do both.
5. Select Done.
To verify the digital signature on a signed message you receive
1. Open the Outlook e-mail message that has been digitally signed.
2. At the top of the message, select View signature status.
3. Select Menu > Check Certificate.
To view the details of the certificate in the message, select Menu > View
Certificate.
Note
There are several reasons why a digital signature may not be valid. For example, the
sender’s certificate may have expired, it may have been revoked by the certificate
authority, or the server that verifies the certificate is unavailable. Contact the sender
to report the problem.
To digitally sign and encrypt all messages
You can set up ActiveSync to digitally sign and encrypt all outgoing messages. You
must obtain a valid certificate to sign and encrypt e-mail messages successfully.
1. Select Start > Applications > ActiveSync.
2. Select Menu > Options.
3. Select the E-mail information type, and select Settings. On the E-mail Sync
Options screen, select Menu > Advanced.
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with Company E-mail and Meeting Appointments 117
4. Select Encrypt messages to protect your
e-mail from being viewed except by the
intended recipients. Select Sign messages
so that recipients are certain that e-mail
messages are sent by you and have not
been altered.
5. Select Menu > Choose Certificate to
select a certificate for signing or encrypting
outgoing e-mail messages.
To set permissions on an e-mail message
Another way of protecting your e-mail messages is to send messages with
restricted permissions using Information Rights Management (IRM).
Requirement
This works only with a Microsoft Outlook e-mail account and if your
company is using RMS Server SP1.
1. Select Start > Messaging > Outlook E-mail.
2. Create a message, then select Menu > Message Options.
3. In Permissions, do one of the following:
•
•
To allow anyone to read the message, select Unrestricted Access.
To prevent the message from being forwarded, printed, or copied, select
Do Not Forward.
4. Select Done.
Tip
An IRM-protected message received on your phone can only be replied to or
forwarded if the message permits it.
Download from Www.Somanuals.com. All Manuals Search And Download.
118 Working with Company E-mail and Meeting Appointments
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
Getting Connected
8.1 Comm Manager
Comm Manager acts like a central switch that lets you enable or disable phone
features as well as manage your connections easily.
To open Comm Manager:
Select Start > Comm Manager.
5
1
6
2
3
4
Select to toggle Airplane mode on and off. Turning on Airplane mode turns off
wireless functions, including the phone connection, Bluetooth, Wi-Fi, and data
connection.
1
Select to toggle the phone on and off. Select Settings > Phone to access phone
settings. Select Settings > Profiles to change phone profiles.
2
3
Select to toggle Bluetooth mode on and off. See “Bluetooth”for details. Select
Settings > Bluetooth to configure Bluetooth on your phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
120 Getting Connected
Select to toggle Wi-Fi on and off. Select Settings > WLAN Settings to configure
Wi-Fi on your phone. See “Wi-Fi”for details.
4
5
6
Select to toggle between automatically receiving (as items arrive) or manually
retrieving Outlook E-mail messages. See Chapter 7 for details.
Select to connect or disconnect the 3G, GPRS or EDGE data connection.
8.2 Connecting to the Internet
Your phone’s networking capabilities allow you to access the Internet or your
corporate network at work through wireless and conventional connections.
You can connect to the Internet by using one of the following:
•
•
•
Wi-Fi
3G, GPRS or EDGE
Dial-up
Note
You can also add and set up the following connections:
•
VPN: A VPN connection is used to access your corporate network by using an
existing Internet connection.
•
Proxy: A Proxy connection is used to access the Internet using an existing
connection to your corporate or WAP network.
Wi-Fi
Wi-Fi provides wireless Internet access over distances of up to 300 feet. To use Wi-Fi
on your device, you need access to a wireless access point.
Note
The availability and range of your phone’s Wi-Fi signal depends on the number,
infrastructure, and other objects through which the signal passes.
To connect to an existing Wi-Fi network
1. On the Home screen, select Start > Comm Manager.
2. Scroll down and select the Wi-Fi icon to turn Wi-Fi on.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 121
The button indicates that Wi-Fi is turned on.
2. After a few seconds, a message asks you if you want to see the list of available
networks, select Yes.
3. In Select network, choose the wireless network to connect to.
4. In Network type, select Internet and select Connect.
Notes
•
When you select an open (unsecured) network, you will be automatically
connected to the network after selecting Connect.
•
If you are connecting to a security-enabled network, you will be asked to enter the
WEP Key. Enter the WEP Key and select Done.
You can check the Wi-Fi icon on the title bar of the screen to see if you are
connected to the Wi-Fi network. See “Status Icons”in Chapter 1 for more
information about the different status icons.
Note
In Comm Manager, select Settings > WLAN Settings > Connection Status to check
the current Wi-Fi connection status and signal quality.
To increase security on the Wi-Fi network
The LEAP (Lightweight Extensible Authentication Protocol) feature helps increase
security on your phone, and ensures that nobody is able to access your network
without your permission.
1. On the Home screen, select Start > Comm Manager.
2. Select Settings > WLAN Settings.
3. On the WLAN Settings screen, select LEAP.
4. Select Menu > New.
5. Enter the SSID (Service Set Identifier). You can obtain this information from
T-Mobile.
6. Enter the user name, password, and domain.
7. Select an Authentication Type. By default, the authentication type for your
phone is Open System authentication.
Download from Www.Somanuals.com. All Manuals Search And Download.
122 Getting Connected
Notes
•
By default, the LEAP screen displays data that you entered previously. However,
you can modify or delete the data as required by selecting Menu > Modify or
Menu > Delete on the LEAP screen.
•
For LEAP to work correctly, the receiving phone (your phone) must be set with the
same SSID, user name, and password as the access point.
3G/GPRS/EDGE
You can use the 3G, GPRS or EDGE data connection to connect to the Internet or to
send and receive multimedia messages on your phone.
Note
You need a data plan to access the T-Mobile 3G/GPRS/EDGE network. T-Mobile
3G/GPRS/EDGE settings are already preconfigured on your phone and cannot be
modified.
The data connection is automatically started when you begin using a program
or function that accesses the Internet, such as accessing a web site using Internet
Explorer Mobile, sending e-mail, and more.
Dial-up
When you use your phone to dial up to your ISP and connect to the Internet or to
your corporate network, you will be billed by the number of minutes that you use.
To set up a dial-up connection for browsing the Internet
1. On the Home screen, select Start > Settings > Connections > Dial-up > New.
2. In Description, enter a name for the connection.
3. In Connects to, select The Internet.
4. Enter the appropriate information in the remaining fields, then select Done.
To set up a dial-up connection to your corporate network
1. On the Home screen, select Start > Settings > Connections > Dial-up > New.
2. In Description, enter a name for the connection.
3. In Connects to, select Work.
4. Enter the appropriate information in the remaining fields, then select Done.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 123
8.3 Internet Explorer Mobile
Internet Explorer Mobile is a full-featured Internet browser, optimized for use on
your phone.
To open Internet Explorer
•
On the Home screen, scroll to the Internet Explorer panel and then press the
TRACKBALL. Or,
•
On the Home screen, select Start > Internet Explorer.
Browsing the Web
1. In Internet Explorer, select Menu > Go to Web Address.
2. Enter the address and select Go.
3. Use the TRACKBALL to browse the Web page. Press the TRACKBALL when a
link is highlighted to access it.
When browsing the Web, press the BACK key to return to the previous web site or
page. To go forward, select Menu > Forward.
From the menu, you can also change the view, save Favorites, set Internet Explorer
Mobile preferences, and more.
Select Menu > Add to
Select Menu > View and
Select Menu > Tools and
choose to send the link
via e-mail, view the page’s
properties, or set Internet
Explorer Mobile preferences.
Favorites to save the current
Web page in your Favorites
folder. Select Favorites to
access your Favorites folder.
then select the text size and
type of view you want to use
while browsing a Web page.
Download from Www.Somanuals.com. All Manuals Search And Download.
124 Getting Connected
Navigating web pages
Navigating large-sized web pages is easy by using the zoom feature.
1. Go to the web page that you want to view.
2. Select Zoom Out.
3. Use the TRACKBALL to move the box to the
area of the web page you want to view.
4. Select Zoom In or press the TRACKBALL to
view the selected area using the selected
zoom level.
Copying web page text
Copy text from a web page and then paste it on a text message or e-mail.
To copy text on a web page
1. On the web page, select Menu > Copy/Paste > Make Selection.
2. Use the TRACKBALL to position the cursor where you want to start copying
and then select Select.
3. Scroll right/left until you have selected the text you want to copy and then
select Copy.
Tip
Scroll up or down to select the whole line of text.
Adding a URL exception
Some URLs for web pages on your company intranet may use periods, for example:
intranet.companyname.com. To view these pages in Internet Explorer Mobile, you
must create a URL exception.
1. On the Home screen, select Start > Settings > Connections > Menu >
Advanced.
2. Select Menu > Work URL Exceptions > Menu > Add.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 125
3. In URL Pattern, enter the URL name.
To add multiple URLs, use a semicolon (;).
4. Select Done.
Note
You do not need to create URL exceptions for Internet URLs.
8.4 YouTube
YouTube™ lets you browse, search, and watch video clips from the YouTube server.
This section shows you how to use the YouTube application on your device to
browse, search, watch, and bookmark videos from YouTube.
Note
You need an active connection to use YouTube. If you are using a data connection,
your data connection bill may increase significantly due to large file sizes of the
videos.
To open YouTube
Select Start > YouTube to open the YouTube application.
Displays the current
program channel being
viewed.
Displays the
available videos
for the selected
program channel.
Highlight a video
and press the Enter
key to watch it.
Press the navigation key
left and right to switch
between the different
YouTube screens: Videos,
Bookmarks, History, and
Search
Select to open the
Program Guide list
Select to add a video to bookmarks,
share the video, view more details on
the video, access settings, and more.
Download from Www.Somanuals.com. All Manuals Search And Download.
126 Getting Connected
Browsing for videos
The Program Guide list lets you change the program channel so you can browse
different types of videos available on the YouTube server.
To add a new program channel into the Program Guide list:
1. On the YouTube screen, scroll to
2. Select Search.
.
3. On the Search screen, enter keywords to search for channels you want to add
to the Program Guide list.
4. Select Search. YouTube searches for the channel and then displays the
available videos.
5. Select Menu > Add to Program Guide, and then select Yes on the
confirmation screen.
The channel you just subscribed to will now be shown when you select
Program Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 127
To change the program channel:
1. On the Videos screen, select Program Guide.
2. On the Program Guide list, select a channel.
3. The video list refreshes to display the available videos for the newly selected
channel.
To delete a program channel from the Program Guide list:
You can only delete program channels that you have added to the Program Guide
list.
1. On the Videos screen, select Program Guide.
2. Scroll down to the channel you want to delete.
3. Select Menu > Remove.
4. On the confirmation screen, select Yes.
Watching videos
In the Videos, Bookmarks, or History screens, select a video and press the Enter key
to launch the YouTube Video Player.
While watching YouTube videos, you can also use the following controls on your
device:
Control
Use
Enter Key
Toggle between playing and pausing video playback.
Press and then press the Enter key to skip forward in the video.
Navigation Key Right
Navigation Key Left
Navigation Key Up
Navigation Key Down
Press and then press the Enter key to skip backward in the video.
Press and then press the Enter key to stop the video.
Press and then press the Enter key to view video details.
Download from Www.Somanuals.com. All Manuals Search And Download.
128 Getting Connected
When you press the Enter key or finish watching the entire video, you are presented
with details on video you just watched. Select Menu to view options on what you
can do next.
1
2
3
4
5
6
7
1. Home. Select to go to the Program Guide.
2. Back. Select to return to the previous screen.
3. Add to Bookmarks. Select to add the video to your Bookmarks.
4. Share. Select to share the video via e-mail.
5. Settings. Select to set the default country and the video playback quality.
6. Exit. Select exit the YouTube application.
7. Add Channel. Select to go add this channel to the Program Guide.
Tip
To adjust the volume, press the volume up or down buttons at the left side of the
device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 129
Bookmarks
You can save frequently viewed videos to Bookmarks for quick access.
To add a video into Bookmarks:
Do one of the following:
•
•
After watching a video, select Menu > Add to Bookmarks.
On the list of videos, highlight the video you want to add to Bookmarks and
then select Menu > Add to Bookmarks.
To view Bookmarks:
On the YouTube screen, scroll to
. Select a video to watch it.
To delete a video from Bookmarks:
1. On the Bookmarks screen, select the video you want to delete.
2. Select Delete.
3. On the confirmation screen, select Yes.
History
View recently watched videos on the History screen.
To view History:
On the YouTube screen, scroll to
. Select a video to watch it.
Note
To clear the History list, select Clear.
Download from Www.Somanuals.com. All Manuals Search And Download.
130 Getting Connected
8.5 Internet Sharing (Using Your Phone as a Modem)
With Internet Sharing, you can use your phone as an external modem for another
device such as a PDA phone or notebook computer.
Note
Make sure your phone has a SIM card installed, and you have set up a GPRS/3G or
phone dial-up modem connection on your phone. If your phone has not been set
up with a data connection yet, select Menu > Connection Settings on the Internet
Sharing screen. For more information about setting up a GPRS or 3G connection, see
"3G/GPRS/EDGE". For more information about setting up a phone dial-up connection,
see "Dial-up".
To set up the phone as a USB modem
1. On your phone, select Start > Device Management > Internet Sharing.
2. In the PC Connection list, select USB.
3. In the Network Connection list, select the name of connection that your
phone uses to connect to the Internet.
4. Plug in the USB cable between your phone and the computer.
5. Select Connect.
To set up the phone as a Bluetooth modem
You can connect your phone to a computer through Bluetooth and use the phone
as a modem for the computer.
To learn how to set up the phone as a Bluetooth modem, see “Using the phone as a
Bluetooth modem”in this chapter.
To end the Internet connection
On the Internet Sharing screen, select Disconnect.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 131
8.6 Bluetooth
Bluetooth is a short-range wireless communications technology. Phones with
Bluetooth capabilities can exchange information within a distance of about 26 feet
(eight meters) without requiring a physical connection.
Bluetooth modes
Bluetooth on your phone operates in three different modes:
•
•
•
On. Bluetooth is turned on. Your phone can detect other Bluetooth-enabled
devices, but not vice versa.
Off. Bluetooth is turned off. In this mode, you can neither send nor receive
information using Bluetooth.
Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices
within range can detect your phone.
Note
By default, Bluetooth is turned off. If you turn it on, and then turn off your phone,
Bluetooth also turns off. When you turn on your phone again, Bluetooth automatically
turns on.
To turn on or off Bluetooth on your phone
You can enable Bluetooth by selecting the Bluetooth button in the Comm Manager.
You can also do the following:
1. On the Home screen, select Start > Comm Manager > Settings > Bluetooth.
2. Select Bluetooth > Menu > Turn On Bluetooth.
3. To turn off Bluetooth capabilities on your phone, select Bluetooth > Menu >
Turn Off Bluetooth.
To make your phone visible
1. On the Home screen, select Start > Comm Manager > Settings > Bluetooth.
2. Select Bluetooth > Menu > Turn On Visibility.
Tip
Enter a Bluetooth phone name for your phone. This will be the phone name that will be
shown on another Bluetooth-enabled device when it searches and detects your phone.
To enter a name, on the Bluetooth screen, select Security and enter a Device name.
Download from Www.Somanuals.com. All Manuals Search And Download.
132 Getting Connected
Bluetooth partnerships
A Bluetooth partnership is a relationship that you create between your phone and
another Bluetooth-enabled device in order to exchange information in a secure
manner.
To create a Bluetooth partnership
1. On the Home screen, select Start > Comm Manager > Settings > Bluetooth.
2. Select Bluetooth > Add new device.
Your phone searches for other Bluetooth-enabled devices and lists them.
3. Select the desired device name in the list and select Next.
4. Enter a passcode (1 up to 16 characters) to establish a secure connection,
then select Next.
5. Wait for the paired device to accept the partnership. The receiving party
needs to enter the same passcode that you specified.
6. After the receiving party enters the passcode, a message box appears on your
phone confirming the partnership.
Note Select Advanced to change the paired device name and to set the services you
want to use for the paired device.
7. Select Done.
Note
Creating a Bluetooth partnership between two devices is a one-time process. Once
a partnership is created, the devices can recognize the partnership and exchange
information without entering a passcode again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 133
To accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in visible mode.
2. Select Yes when prompted to establish a partnership with the other device.
3. Enter a passcode (the same passcode that is entered on the device requesting
the partnership) to establish a secure connection and select Next.
4. When the connection has been established, a message box appears on your
phone confirming the partnership.
Note Select Advanced to change the paired device name and to set the services you
want to use for the paired device.
5. Select Done.
To change the display name of a Bluetooth device
1. On the Home screen, select Start > Comm Manager > Settings > Bluetooth.
2. Select Bluetooth and then on the screen, select a Bluetooth device.
3. Select Menu > Edit.
4. Enter a new display name for the Bluetooth device, then select Next.
5. Select Done.
To delete a Bluetooth partnership
1. On the Home screen, select Start > Comm Manager > Settings > Bluetooth.
2. Select Bluetooth and then on the screen, select a Bluetooth device.
3. Select Menu > Delete, and then select Yes in the confirmation screen.
4. Select Done.
Download from Www.Somanuals.com. All Manuals Search And Download.
134 Getting Connected
Connecting a Bluetooth hands-free or stereo headset
For hands-free phone conversations or to listen to music, you can use a Bluetooth
hands-free or stereo headset.
Note
You need a Bluetooth stereo headset to listen to music.
To connect a Bluetooth hands-free or stereo headset
1. Make sure that both your phone and the Bluetooth headset are turned on
and that the headset is visible. Refer to the manufacturer’s documentation to
find out how to set the headset in visible mode.
2. Select Start > Comm Manager > Settings > Bluetooth.
3. Select Bluetooth > Add new device.
4. Select the name of the Bluetooth headset, then select Next. The phone will
automatically pair with the Bluetooth headset.
Windows Mobile will automatically try one of the preconfigured passcodes (0000,
1111, 8888, 1234) to pair the Bluetooth headset with the phone. If this fails, you
have to enter the passcode delivered with your headset manually.
Note
If the Bluetooth stereo headset becomes disconnected, turn the headset on and
repeat steps 1 to 3 above. Select the stereo headset and select Menu > Set as
Wireless Stereo.
Beaming information using Bluetooth
You can beam information, such as contacts, calendar items, and tasks, as well as
files from your phone to your computer or to another Bluetooth-enabled device.
Notes
•
If your computer does not have built-in Bluetooth capabilities, you need to
connect and use a Bluetooth adapter or dongle on your computer.
•
Before beaming items to your computer, open Bluetooth Configuration or
Bluetooth Settings in the Control Panel and check if there’s an option for setting a
location for saving beamed items.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 135
To beam information from your phone to a computer
1. Set Bluetooth on your phone to visible mode. For information about this, see
“To make your phone visible”.
2. Next, set Bluetooth on your computer to visible mode, create a Bluetooth
partnership, then enable your computer to receive Bluetooth beams.
If your computer has Windows Vista or Windows XP SP2 and your computer’s
Bluetooth adapter is supported by your Windows version, do the following
steps:
a. On your computer, open Bluetooth Devices from the Control Panel then
click the Options tab.
•
For Windows Vista, select Allow Bluetooth devices to find this
computer; or
•
For Windows XP, select Turn discovery on and Allow Bluetooth
devices to connect to this computer.
b. Create a Bluetooth partnership between your phone and computer. For
information about creating a partnership, see “Bluetooth partnerships”.
c. In the Options tab of Bluetooth Devices, select Show the Bluetooth
icon in the notification area.
d. To enable your computer to receive Bluetooth beams, right-click the
Bluetooth icon at the bottom-right of your computer screen and select
Receive a File.
3. Now you are ready to beam. On your phone, select an item to beam. The item
can be an appointment in your calendar, a task, a contact card, or a file.
•
•
•
•
Calendar appointment: Open and select Menu > Beam Appointment.
Task: Select Menu > Beam Task.
Contact: Select Menu > Send Contact > Beam.
File: Select Menu > Beam.
Download from Www.Somanuals.com. All Manuals Search And Download.
136 Getting Connected
4. Select the device name to which you want to beam to.
5. Select Beam.
6. If you beamed a calendar, task, or contact item to your computer and it is not
automatically added to Outlook, select File > Import and Export to import it
to Microsoft Outlook on your computer.
To beam information to a Bluetooth-enabled device such as another phone, create
a Bluetooth partnership then perform steps 3 to 5 in the above procedure.
Note
Tip
Not all file types can be sent via Bluetooth.
The default folder on your computer where beamed items are stored may be
Windows XP: C:\Documents and Settings\your_username\My Documents
Windows Vista: C:\users\your_username\My Documents.
Using the phone as a Bluetooth modem
You can connect your phone to a notebook or desktop computer through
Bluetooth and use the phone as a modem for the computer.
For the computer to use the Internet connection of your phone, activate Internet
Sharing on your phone, then set up a Bluetooth Personal Area Network (PAN)
between the computer and your phone.
1. On your phone, turn on Bluetooth and set it to visible mode.
2. Initiate a Bluetooth partnership from your phone by following the steps in “To
create a Bluetooth partnership.“
3. Select Start > Device Management > Internet Sharing.
4. Select Bluetooth PAN as the PC Connection.
5. From the Network Connection list, select the name of the connection that
your phone uses to connect to the Internet.
6. Select Connect.
7. On your computer, set up a Bluetooth Personal Area Network (PAN) with your
phone:
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 137
•
•
For Windows XP
a. Click Start > Control Panel > Network Connections.
b. Under Personal Area Network, click the Bluetooth Network
Connection icon.
c. Under Network Tasks, click View Bluetooth network devices.
d. In the Bluetooth Personal Area Network Devices dialog box, select your
phone, then click Connect.
For Windows Vista
a. Click Start > Control Panel > Network and Sharing Center.
b. Click Manage network connections and then under Personal Area
Network, double-click Bluetooth Network Connection.
c. In the Bluetooth Personal Area Network Devices dialog box, select your
phone, then click Connect.
8. On the Internet Sharing screen on your phone, check if the connected status
is displayed, which indicates that your computer has been successfully
connected to the Internet using your phone as a Bluetooth modem.
Download from Www.Somanuals.com. All Manuals Search And Download.
138 Getting Connected
8.7 Windows Live™
Windows Live™ helps you quickly find information using Windows Live™ Search,
access and synchronize your Windows Live™ Mail messages and contacts, and send
instant messages using Windows Live™ Messenger.
Setting up Windows Live
The first time you use Windows Live, sign in by using your Windows Live ID, which is
your Windows Live Mail or Hotmail address, and password.
To set up Windows Live for the first time
1. Select Start > Internet Applications >
Windows Live.
2. Select Sign in to Windows Live.
3. On the next screen, select the links to read
the Windows Live Term of Use and the
Microsoft Privacy Statement. After reviewing
it, select Accept.
4. Enter your Windows Live Mail or Hotmail
address and password, then select Next.
5. Choose whether or not to show Windows Live services on the Home screen
then select Next.
6. Choose what information you want to synchronize with your phone.
If you select Store Windows Live contacts in your mobile phone’s contact
list, your Windows Live contacts will be added to the contact list and to
Windows Live Messenger on your phone.
If you select Sync e-mail, your Windows Live Mail or Hotmail inbox messages
will be downloaded to your phone.
7. Select Next.
8. After synchronization is complete, select Done.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 139
The Windows Live screen
On the main screen of Windows Live, you will see a search bar, navigation bar, and
an area where you can customize to show your picture.
1
Search bar. Enter the information you
want to search, and then press the
TRACKBALL.
Scroll left or right to switch between
Live Mail, Messenger, and Sync status
screens. Press the TRACKBALL to open
the relevant screen.
1
2
3
2
3
4
Select to access Messenger settings.
Select Menu to access and change
settings.
4
If you chose to display Windows Live services on the
Home screen when you were setting up Windows
Live, the Windows Live panel will be added to
the Home screen. Scroll right or left while on the
Windows Live panel to go through the available
services.
Note
To hide Windows Live from the Home screen,
select Options > Home screen options and then
clear the Windows Live services check box.
Download from Www.Somanuals.com. All Manuals Search And Download.
140 Getting Connected
8.8 Windows Live Messenger
Live Messenger lets you send and receive instant messages online. With this
mobile version of Windows Live Messenger, you enjoy many of the same cool
features that you get from the desktop version, which include the following:
•
•
•
•
•
•
•
•
Instant messaging via text and voice
Multiple conversations
Add emoticons
Contact list with presence
Send and receive files including photos
Change status/display name
View contacts by online status, groups, and more
Send messages even when a contact is offline
Note
Before you can use Live Messenger, your phone must be connected to the Internet.
See “Connecting to the Internet”earlier in this chapter for details.
Launching Messenger and signing in
To open Live Messenger
Do one of the following:
•
•
On the Home screen, select Start > Instant Messaging > Messenger.
On the Windows Live panel of the Home screen, scroll left or right until you
see Messenger, then press the TRACKBALL.
To sign in and out
•
To sign in, select Sign in on the Messenger screen. Signing in may take
several minutes, depending on your connection speed.
•
To sign out, select Menu > Sign Out. Your status changes to Offline.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 141
Sending instant messages
You can send instant messages with emoticons, and even talk by sending a voice
clip. While chatting, you can send and receive files directly on a message window.
You can also start conversations with several contacts and switch between their
message screens, or you can invite participants to join in a conversation.
To start and end conversations
1. In the contact list, select a contact then
select Send IM to open a message screen.
2. Send an instant message. See “To send an
instant message with emoticon”for details.
3. To start a conversation with another
contact, scroll left or right to go back
to the contact list, then select another
contact and select Send IM again. Another
message screen opens.
4. To switch from one message screen to
another, scroll left or right to the display
picture of the contact whom you want to
talk to.
Pictures of contacts with
whom you’re talking to
5. To end a conversation with the current contact, select Menu > End
conversation.
6. To end all active conversations, select Menu > End all conversations.
Download from Www.Somanuals.com. All Manuals Search And Download.
142 Getting Connected
To send an instant message with emoticon
1. Select a contact and start a conversation.
2. Enter your text message in the text entry area of the message screen.
3. To add an emoticon, select Menu > Add emoticon then select an icon from
the list of emoticons.
4. Select Send.
Tips
•
To send a file, select Menu > Send. You can choose to send a picture, voice clip or
any file.
•
To invite one or more contacts to the conversation, select Menu > Options > Add
participant.
To send a voice message
1. Select a contact and start a conversation.
2. Select Voice clip then start talking.
3. After you have spoken a message, select Send.
Adding Windows Live contacts
You can add new Windows Live contacts in Live Messenger or in Contacts.
To add a Windows Live contact in Live Messenger
1. Select Menu > Add new contact.
2. Enter the e-mail address of the contact then select OK.
To add a Windows Live contact in Contacts
You can only add Windows Live contacts if you selected the Store Windows Live
contacts in your mobile phone’s contact list check box when you set up Windows
Live.
1. On the Home panel, select Contacts.
2. Select New then select Windows Live.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Connected 143
3. Scroll down, then in the IM box, enter the e-mail address of the contact,
which can be a Windows Live ID or any other e-mail address.
4. Select Done.
5. Follow the remaining instructions to add the new contact to your Windows
Live contact list.
Tip
You can fill in other information about the contact, if desired. This is not absolutely
necessary if you intend to communicate with the contact only through Windows Live
Messenger or Live Mail.
To delete a contact
1. Sign into Live Messenger.
2. In Messenger, select the contact and select Menu > Contact options >
Remove contact.
3. Choose whether to block the contact, and choose whether to delete the
contact from your phone’s contact list.
4. Select OK.
Personalizing Messenger
While on the Messenger contacts list, you can do the following:
•
•
•
•
Select Menu > Change status to set your current status (such as Busy, Out to
lunch, etc.) so that your contacts know whether you are available or not.
Select Menu > Change appearance to change your display name, add a
personal message, and add your picture.
Select Menu > Sort by to organize contacts by online status, groups, name,
or e-mail address. You can also hide offline contacts from the contact list.
Select Options to see more settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
144 Getting Connected
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Navigating on the Road
9.1 Google Maps
Google™ Maps lets you track your current location, view real-time traffic situations,
and receive detailed directions to your destination. You can also search and locate
places of interest or a street address, view maps in satellite view, and more.
Notes
•
•
You need an active data connection or Wi-Fi connection to use Google Maps.
Maps may not be available for all countries.
Opening Google Maps
Select Start > Google Maps.
Note
The first time you open Google Maps, you will be asked to accept terms and
conditions when using Google Maps. You must agree to the terms and conditions for
you to be able to run Google Maps.
Your current
location.
Select to open a menu
where you can view
your current location,
get directions, zoom in,
see traffic information,
and more.
Select to search for places
of interest and addresses.
Download from Www.Somanuals.com. All Manuals Search And Download.
146 Navigating on the Road
Notes
•
•
Currently, traffic information is only available for the U.S.
Select Menu > Options > Reset Google Maps to reset the Google Map cookies,
history of search terms, preferences, and image cache.
Tip
Select Menu > Help > Tips to learn more about the program and its many features
Searching for places of interest
You can search and locate a place of interest using Google Maps. Google Maps also
shows the contact information and gives directions on how to get to the place of
interest from your current location.
Note
You can also search for keywords, addresses, and postal codes.
1. On the Google Maps screen, select Search.
2. Enter the place of interest you want to go to (for example, museum of
modern art), then select Search.
3. In the search results list, select an item and then press the TRACKBALL to view
its contact information.
4. On the Address tab, you can select the following:
•
The web address (when available) to open the web site of the place of
interest.
•
•
The [phone number] to call the place of interest that you have selected.
Directions to here or Directions from here to get directions on how to
get to the place of interest from your current location or how to get to
another location from the place of interest.
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating on the Road 147
Send as text message to send the location’s contact information to a
contact in a text message.
Search nearby to search for other places of interest near the current place
•
•
of interest.
For more information about Google Maps, visit the following web site:
http://www.google.com/gmm/index.html.
9.2 Windows Live Search
Windows Live™ Search is another program that offers you a fast, easy way to find
and view maps and local information on your phone. With Windows Live™ Search,
you can:
•
•
Browse through local listings of categories.
Locate nearby restaurants, shopping centers, etc., and check for street
addresses and phone numbers.
•
•
View maps with directions to and from a location.
View traffic information.
To open Windows Live Search
1. Select Start > Live Search.
2. Read the Service Agreement, and if you agree
with the terms of service, select Accept.
3. On the Welcome screen select OK.
Note You may be prompted to install an update for
Live Search. Select Yes to install the update.
The Live Search main window appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
148 Navigating on the Road
To find a location
1. Specify first where the location is near. You can select from the list of cities.
You can also select Choose a new location to enter a city, select on a map, or
get a contact’s address.
Tip
Windows Live Search allows you to speak the name of the business. Select Speak
and say the name clearly.
2. Enter the location that you want to find and then press the the TRACKBALL
key.
3. The Search Results screen then shows a list of matched places. Use the
TRACKBALL to browse through the list. As you browse, the address, phone
number, and estimated distance of a selected item are displayed.
4. Select the desired location in the Search Results screen and then press the
TRACKBALL.
5. On the Details screen:
•
•
•
Select Map to see the location on a map.
Select Directions to Here for instructions on how to reach the location.
Select Search Near Here to find addresses, businesses, or other places of
interest near the location.
To close Windows Live Search
Select Menu > Exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating on the Road 149
9.3 Guidelines and Preparation for Using GPS
If you install a GPS software on your phone, please follow these guidelines before
and when using your phone as a GPS device.
•
When using GPS navigation software in the car, always plot your GPS route
before starting to drive. Do not try to configure the GPS navigation software
while driving.
•
•
The plotted GPS route is only for driving reference. It should not interfere with
actual driving behavior.
Do not leave your phone in a vehicle or expose the phone to direct sunlight
to avoid overheating the battery, which could cause damage to the phone or
pose a risk to the vehicle.
•
When using the phone inside a vehicle, use the car holder to mount the
phone securely in place. Avoid placing the phone in the areas shown in the
following diagram:
1
Do not place where it
will block the driver’s
vision.
2
3
Do not place where air
bags could deploy.
Do not place anywhere
in the vehicle without
securing the phone in
the holder.
•
•
Use the GPS system cautiously. Users shall be liable for any damages resulting
from negligent operation of the system.
Wireless communication products (such as mobile phones or radar-detecting
devices) may interfere with the satellite signal, resulting in unstable signal
reception.
Download from Www.Somanuals.com. All Manuals Search And Download.
150 Navigating on the Road
•
The GPS signal cannot pass through solid non-transparent objects. Signal
reception may be affected by obstructions such as high-rise buildings,
tunnels, bridges, forests, weather (rainy or cloudy days), etc. If the vehicle’s
visor contains metal, it will be difficult for the GPS signal to pass through.
•
The Global Positioning System (GPS) is built and operated by the US
Defense Department. The Department is responsible for the accuracy and
maintenance of the system. Any changes that the Department makes may
affect the accuracy and function of the GPS system.
9.3 Downloading Satellite Data via QuickGPS
Before using the phone for GPS navigation, open QuickGPS to download ephemeris
data (current satellite position and timing information). QuickGPS significantly
speeds up the time for determining your GPS position. QuickGPS downloads
ephemeris data from web servers, instead of from satellites, using your phone’s
Internet connection via Wi-Fi, ActiveSync or 3G/GPRS/EDGE.
To open QuickGPS
Select Start > QuickGPS.
To download GPS data
Select Download on the QuickGPS screen.
On the screen, initially, you will see the Valid time of
the downloaded data. As time passes, the remaining
days and hours of validity will be shown.
To speed up GPS positioning, download the latest
ephemeris data when the validity of the data expires.
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating on the Road 151
To choose download options
Select Menu > Options and choose from the available options:
•
•
•
Remind me when data expires. Display a message when ephemeris
data expires.
Auto download when data expires. Automatically download ephemeris
data when it expires.
Auto download when connected to PC via ActiveSync. Automatically
download ephemeris data when it is connected to your computer via
ActiveSync. Your computer must be connected to the Internet to download
ephemeris data.
•
Exit QuickGPS after downloading.Close QuickGPS after satellite data is
downloaded.
Download from Www.Somanuals.com. All Manuals Search And Download.
152 Navigating on the Road
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10
Camera and Multimedia
10.1 Taking Photos and Videos with the Phone Camera
Taking photos and shooting video clips are easy with your phone’s built-in 2.0
megapixel camera.
To open Camera
Do either of the following:
•
•
Press
.
On the Home screen, select Start > Camera or Start > Video Recorder.
To exit Camera
Press END/POWER.
Note
Pressing END/POWER only "minimizes" the Camera program, it is still running in the
background. To close the Camera program, go to Task Manager.
Installing a storage card
If you have a microSD card inserted, you will be prompted to choose whether to
save your pictures on the microSD card or the phone. Select the location for storing
pictures and videos taken with the camera and select OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
154 Camera and Multimedia
Taking photos or capturing video clips
Point the camera at the subject, and then press the TRACKBALL or to take
the photo.
When capturing video, press the TRACKBALL or to start recording; press again
to stop.
Capture modes
On the Camera screen, scroll right or left with the TRACKBALL to change the
capture mode.
The Camera program lets you capture pictures and video clips by using various
built-in modes. The title bar displays the active capture mode.
The available capture modes are as follows:
Icon Capture mode
Photo
Function
Captures standard still images.
Video
Captures video clips, with or without audio.
Captures video clips suitable for sending via multimedia
message.
Video Messaging
Captures a still image suitable for assigning as an identification
photo to a contact.
Contacts Picture
Picture Theme
Captures still images and places them within frames.
Captures a sequence of still images continuously in one
direction, and stitches the images together to create a
panoramic view of a scenery.
Panorama
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera and Multimedia 155
Using the different capture modes, the camera captures files in the following
formats:
Capture type
Format
Still Image
JPEG
Video / Video Messaging MPEG-4 (.mp4)
H.263 baseline (.3gp)
Camera mode icons and indicators
The camera icons and indicators disappear after a few seconds if there is no user
interaction. Scroll the TRACKBALL, press any key on the keyboard, or press the
left/right SOFT KEYS to display the icon indicators again.
The Camera [Photo] screen
2
3
1
Indicates the current zoom ratio. Scroll up or
down to increase or decrease the zoom level.
2
3
Indicates the current capture mode.
Depending on the capture mode, this shows
the remaining available number of pictures
that you can take or remaining duration that
can be recorded. While recording video, this
shows the recorded duration.
1
4
5
Select to open the Camera settings menu.
Select to open Photo & Video Album.
5
4
Download from Www.Somanuals.com. All Manuals Search And Download.
156 Camera and Multimedia
The Camera [Video] screen
The Camera [Picture Theme] screen
6
7
6
The Recording Status indicator blinks
while video recording is in progress.
7
Displays the current and total number
of photos that can be taken using the
selected template.
Using zoom
Before capturing a still image or a video clip, you can first zoom in to make the
object in focus move closer, and you can zoom out to make the object move farther
away. In all capture modes, scroll up with the TRACKBALL to zoom in, scroll down to
zoom out.
The camera zoom range for a picture or video depends on the capture mode and
capture size. Also, please note the capture sizes available for certain capture formats
also vary from one capture mode to another.
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera and Multimedia 157
Quick Send
Quick Send lets you quickly send photos you have taken using the phone camera to
your online T-Mobile album or journal account or a contact via e-mail or multimedia
messaging.
Press the left SOFT KEY
to open the Quick Send
options screen.
Press the right SOFT KEY
to send the photo to the
default destination.
Press the TRACKBALL to
take another photo without
sending the current photo.
Note
Quick Send is only available in Photo mode. In other modes, the Review screen
appears after you stop capturing. See “The Review screen”in this chapter for details.
To change Quick Send settings
Quick Send options let you send the photo to another destination, edit the
message before you send out the photo, set the photo as a myFaves icon, change
the default destination, and more. You can access the Quick Send options by
selecting Options on the Quick Send screen or in the Camera Options menu.
Note
Quick Send is only available for Photo, Picture Theme, and Panorama modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
158 Camera and Multimedia
To change the default destination
1. On the Camera screen, select Options > Destination > Customized.
Note You must be in the Photo capture mode to be able to see the Quick Send tab.
Tip
You can also change the default destination on the Quick Send screen by
selecting Options > Default Destination > Change.
2. On the Change screen, select the new destination and then select Select.
3. On the next screen choose the appropriate action according to the new
destination (enter new phone number or e-mail address, select a phone
contact, and so on).
4. On the confirmation screen, select OK to change the default destination.
To disable Quick Send
By default, the Quick Send screen appears after you have taken a photo using one
of the supported capture modes (.
To disable the Quick Send screen, on the Camera screen, select Options > Quick
Send > Off.
Note
When Quick Send is disabled, the Review screen will appear after capturing a photo
or video.
The Review screen
After capturing a photo or video, you will
be presented with options that you can do
with the captured media file. Scroll left/right
to select an option and then press the
TRACKBALL.
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera and Multimedia 159
Press
To
Go back to the Camera screen.
Delete the captured media.
Send the captured image or video clip to someone via e-mail or multimedia
message.
Associate the photo to a selected contact.
View the image in Photo & Video Album or play back the video in Windows
Media Player.
Hide the Review screen icons. Select again to show the icons.
Customizing Camera advanced settings
On the Camera screen, select Options on the Camera screen to open the Camera
Advanced settings where you can activate the self-timer, change the ambience,
customize capture settings, and more.
Use the TRACKBALL to go through the available settings.
Option
Allows you to
Mode
Select the capture mode to use.
Quick Send
Destination
Send to Email
Turn Quick Send on and off.
Set the default destination for sending files when Quick Send is on.
Select whether to send photo via multimedia message or e-mail
when you select Send File ( )on the Review screen.
Self-timer
Select the Self-timer option for capturing images: Off, 2 seconds,
or 10 seconds. Selecting 2 seconds or 10 seconds delays the
capturing by the specified time after you press the TRACKBALL.
Download from Www.Somanuals.com. All Manuals Search And Download.
160 Camera and Multimedia
Option
Allows you to
Brightness
White Balance
Adjust the brightness from -2 to +2 (increments of 0.5).
Specify the white balance setting such as Auto, Daylight, Night,
Incandescent, and Fluorescent to suit the lighting environment.
Resolution
Choose the resolution to use. The resolution options depend upon
which camera mode you are using.
Capture Format
Select whether to use MPEG4 or H.263.
(Video and Video
Messaging modes only)
Quality
Select the JPEG image quality level for all captured still images. You
can choose from Basic, Normal, Fine, and Super Fine. This option is
available in all modes except Video and Video Messaging.
Time Stamp
(Photo mode only)
Choose whether or not to include the shooting date and time on
captured photos.
Storage
Select where you want to save your files. You can either save the
files to the main memory or to a storage card.
Choose Frame
(Picture Theme mode
only)
Select the template to use.
Direction
Choose in what direction images will be stitched in a panorama.
(Panorama mode only)
Stitch Count
(Panorama mode only)
Select the desired number of snapshots to be taken and stitched
into a panorama.
Keep Backlight
Choose whether to turn the backlight on or off while using the
camera. This overrides your phone backlight settings while you are
using the camera.
Shutter Sound
Choose whether or not you want the camera to make a shutter sound
when you take photos or record video clips.
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera and Multimedia 161
Option
Allows you to
Review Duration
Set a time length for displaying the captured image or video on
the Review screen before automatically saving it and returning
to the live Camera screen. Select No Limit to allow the picture
to be displayed until you choose to take another action. Select
No Review to immediately return to the live Camera screen after
capturing.
Effect
Choose a special effect such as Grayscale, Sepia, or Negative to
apply to your photos or video clips.
Note: White Balance cannot be applied if an Effect has already
been applied.
Metering Mode
Select a metering mode to allow the camera to measure the
amount of light in the center and around the image and calculate
the best-fit exposure value before capturing. Choose either Center
Area to measure light using the center area of the image or
Average to measure light using the area all around the image.
Record with Audio
(Video and Video
Select On to record audio while capturing video clips. This is
selected On by default. If you select Off and then capture a video
Messaging modes only) clip, it will have no audio.
Prefix
Set a prefix to image or video filenames.
When Default is selected as the prefix, the filename of each new
captured file is set to “IMAGE”or “VIDEO”followed by a sequential
number, for example: IMAGE_001.jpg. You may also choose to
prefix filenames using either the current Date or Date & Time.
Note: If you set the Camera to save captured photos to a storage
card, the prefix cannot be selected. Captured photos will be
named using the DCIM (Digital Camera Images) naming standard.
Counter
Select Reset to reset the naming counter to 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
162 Camera and Multimedia
Option
Allows you to
Flicker Adjustment
When taking indoor shots, flicker on the camera screen may be
caused by interference from fluorescent lighting. To reduce flicker,
change the flicker adjustment setting to Auto or to the proper
frequency (50Hz or 60Hz) of the country where your phone is
being used.
Show Save Message
Enable or disable the confirmation message that is displayed when
you capture a photo or video.
Template Folder
(Picture Theme mode
only)
By default, templates are stored in the \My Documents\Templates
folder on the phone’s main memory. If you transferred some
templates to a storage card (using File Explorer), set this option to
Main + Card to specify that templates are located in both the main
memory and the storage card.
Show Reminder
Select On to be prompted to set the picture to a contact after
(Contacts Picture mode taking a contact picture. Select Off to disable the prompt.
only)
Recording Limit
(Video mode only)
Specify the maximum time or file size for recording video clips.
Display the Camera’s firmware information.
About
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera and Multimedia 163
10.2 Photo & Video Album
View your images and videos that you captured using the Camera program in
Photo & Video Album. Photo & Video Album offers a host of features that let you
rotate images, view your images as a slide show, use images as contact pictures,
and more.
Note
Photo & Video Album can only display files using the JPEG, MPEG4 or H.263 file
formats.
To open Photo & Video Album
Do one of the following:
•
•
Select Start > Photo & Video Album.
In the Camera program, select Album.
Select to go to the
Camera program
To view an image in full screen
On the main Photo & Video Album screen, use the TRACKBALL to select the image
you want to view and then press the TRACKBALL. While viewing the image, select
Zoom In to zoom in on the image.
Note
If you do not see Zoom In on the screen, press the TRACKBALL to show the menu bar
at the bottom of the screen.
While zoomed in, use the TRACKBALL to pan the image. Select Zoom Out to zoom
out of the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
164 Camera and Multimedia
To go to the next image
Scroll right or left with the TRACKBALL to go to the next or previous image.
Note
If you are zoomed in on an image, you need to zoom out first before you can go to the
next or previous image.
To view the images as a slide show
On the Photo & Video Album screen, select the image where you want to start the
slideshow from and then select Menu > Slideshow. The slideshow automatically
starts playing back from the selected image.
Tips
•
Press the TRACKBALL to pause the slideshow playback. Press the TRACKBALL again
to resume playback.
•
On the main Photo & Video Album screen, select Menu > Options to set slide
show options such as transition to use and duration of each image.
To play back video files
On the main Photo & Video Album screen, select the thumbnail of the video file you
want to play back. Windows Media Player then plays back the file.
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera and Multimedia 165
10.3 Windows Media Player Mobile
You can use Microsoft® Windows Media® Player
Mobile to play digital audio and video files that are
stored on your phone or on a network, such as on
a web site.
To open Windows Media Player Mobile, select
Start > Windows Media.
About the controls
By default, these hardware buttons are assigned to Windows Media Player Mobile
functions.
Tip
To change the assigned hardware buttons, on the Playback screen, select Menu >
Options > Buttons.
To
Do this
Play or pause
Skip to a previous file
Press TRACKBALL
Scroll TRACKBALL left
Scroll TRACKBALL right
Scroll TRACKBALL up
Scroll TRACKBALL down
Press #
Skip to the next file
Increase the volume
Decrease the volume
Turn the sound on or off quickly (mute)
Toggle full screen mode during video playback
Change rating
Press 0
Press *
Download from Www.Somanuals.com. All Manuals Search And Download.
166 Camera and Multimedia
About the screens and menus
Windows Media Player Mobile has three primary screens:
Library screen
Now Playing screen
This special playlist
indicates the current file
being played and files that
are queued up to play next.
Playback screen
The default screen that
displays the playback
controls and the video
window.
The screen that lets you
quickly find your audio
files, video files, and
playlists.
Select Menu to open a list of options that you can do in a particular screen The
commands on this menu vary, depending upon which screen you are viewing.
About licenses and protected files
Some media files have associated licenses that protect them from being unlawfully
distributed or shared.
If you want to copy a protected file from your PC to your phone, use the Windows
Media Player on your PC to synchronize the file to your phone. This will ensure that
the license is copied along with the protected file. For more information about
synchronizing files to your phone and other mobile devices, see the Windows
Media Player Help.
Note
You can view the protection status for a file by checking its file properties
(Menu > Properties).
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera and Multimedia 167
Copying files to your phone
Use the Sync feature in Windows Media Player on your PC to synchronize (copy)
digital media files from your PC to your phone. Using Sync ensures that protected
files and album art (for skins) are copied to your phone correctly.
To synchronize content to your phone automatically
1. On your PC, start Windows Media Player and then connect your phone to
your PC.
2. In the Device Setup Wizard, type a name for the phone and click Finish.
3. On the leftmost pane, right-click your phone and select Set Up Sync.
4. On the Device Setup dialog box, select the Sync this device automatically
and then select the playlist(s) that you want to sync between the PC and your
phone.
5. Click Finish.
Note
You can also sync your storage card if you have one installed on your phone. To sync,
right-click Storage Card.
The files begin synchronizing to your phone. The next time you connect your
phone to your PC while Windows Media Player is running, synchronization will start
automatically.
To synchronize and copy content manually to your phone
1. If you have not set up synchronization between your phone and PC, follow
steps 1 to 3 in “To synchronize content to your phone automatically.”
2. Click the Sync tab on the Windows Media Player. Select a Playlist or a Library
on the left panel of the Windows Media Player.
3. From the content list, drag files you want to sync to your phone to the right
panel of the Windows Media Player.
4. Click Start Sync to start copying files to your phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
168 Camera and Multimedia
Playlists and Library list
Drag files from the content
list to sync to your phone
Playlist or library content list
Start Sync
Notes
•
•
Always use Windows Media Player 11 on your PC to synchronize (copy) files to your
phone.
Audio files copy faster if Windows Media Player is configured to automatically set
the quality level for audio files copied to your phone. For more information, see the
Windows Media Player Help.
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera and Multimedia 169
Playing media
To play media on your phone
Use the library to find and play songs, videos, and playlists that are stored on your
phone or storage card.
1. If you are not on the Library screen, select Menu > Library.
2. If necessary, on the Library screen, select Menu > Library, and then select the
library that you want to use.
3. In most cases, Windows Media Player Mobile automatically updates the
library. However, you can manually update the library to ensure that it
contains new files that you recently copied to your phone or storage card.
Select Menu > Update Library to manually update the library list.
4. Select a category (for example, My Music or My Playlists), select the item
that you want to play (such as a song, album, or artist name), and then select
Play.
Note
To play a file that is stored on your phone but is not in a library, on the Library screen,
select Menu > Open File. Select the item that you want to play (such as a file or a
folder), and select Play.
Troubleshooting
For more information, see the Troubleshooting Windows Media Player Mobile page
at the Microsoft Web site: (http://www.microsoft.com/windows/windowsmedia/
player/windowsmobile/troubleshooting.aspx).
Download from Www.Somanuals.com. All Manuals Search And Download.
170 Camera and Multimedia
10.4 Java Applications
You can download, install and manage MIDlets or MIDlet suites on your phone.
MIDlets are Java-based applications such as games and tools that can run on
mobile devices, while a MIDlet suite is a collection of one or more MIDlets. Your
phone supports Java 2 Micro Edition (J2ME).
Installing and running MIDlets/MIDlet suites
To download and install from the Internet
1. Open Internet Explorer.
2. Navigate to the web page with the link for the MIDlet/MIDlet suite you want
to download, and select the link.
3. Follow the onscreen instructions to install and run the MIDlet/MIDlet suite.
Notes
•
•
You can cancel the installation at any time.
Downloaded MIDlets will be automatically saved in the My Documents folder.
To install from a computer
You can install the MIDlets/MIDlet suites on your phone from a PC using the USB
sync cable, or Bluetooth. MIDlets copied to your phone using Bluetooth or e-mail
attachments are automatically saved in the My Documents folder.
To install from your phone
1. On the Home screen, select Start > Applications> Java Applications.
2. Select Install > Local Install. The program then searches for MIDlets/MIDlet
suites on your device and displays them in a list.
3. From the list, select the MIDlet/MIDlet suite that you want to install and press
the TRACKBALL.
4. Follow the onscreen instructions to install and run the MIDlet/MIDlet suite.
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera and Multimedia 171
To run MIDlets/MIDlet suites on your phone
1. On the Home screen, select Start > Applications> Java Applications.
2. Open the folder that contains the MIDlet/MIDlet suite, and then select the
MIDlet/MIDlet suite.
Managing MIDlets/MIDlet suites
You can organize the MIDlets/MIDlet suites into folders. You can also uninstall,
move or rename MIDlets/MIDlet suites.
To update a MIDlet/MIDlet suite
1. On the Home screen, select Start > Applications> Java Applications.
2. Select the MIDlet/MIDlet suite that you want to update.
3. Select Menu > Application > Update Info. The program then searches for
updates for the selected MIDlet/MIDlet suite.
To uninstall a MIDlet
Before you uninstall a MIDlet/MIDlet suite, make sure that it is not running.
1. On the Home screen, select Start > Applications> Java Applications.
2. Select the MIDlet/MIDlet suite that you want to remove.
3. Select Menu > Application > Delete.
4. Select Yes to confirm.
Note
To uninstall all MIDlets and folders,, select Menu > Application > Delete All.
Download from Www.Somanuals.com. All Manuals Search And Download.
172 Camera and Multimedia
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11
Using Other Applications
11.1 Adobe® Reader® LE
Adobe® Reader® LE lets you view Portable Document Format (PDF) files.
When you open a password-protected PDF file, you will be prompted to enter the
password before the file can be opened.
To open a PDF file on your phone
1. Select Start > Applications > Adobe Reader LE.
2. Select Open.
3. Browse to a folder and select the PDF file you want to open.
Note
To open another PDF file, select Menu > Open > Browse. You can also open a PDF file
from File Explorer by selecting it.
To navigate through a PDF file
You can do any of the following:
•
•
Use the TRACKBALL to scroll through the pages.
Select Tools > Go To and select an option to go to a specific page in the
PDF file.
•
Select Tools > Zoom to zoom in and out on the document.
Download from Www.Somanuals.com. All Manuals Search And Download.
174 Using Other Applications
11.2 Microsoft® Office Mobile
Microsoft® Office Mobile consists of four applications that let you view and edit
Microsoft documents. These applications are:
•
Microsoft® Office Word Mobile: view and edit Microsoft Word documents
and text files.
•
•
•
Microsoft® Office Excel® Mobile: view and edit Microsoft Excel worksheets.
Microsoft® Office PowerPoint® Mobile: view Microsoft PowerPoint slides.
Microsoft® Office OneNote® Mobile: lets you easily create notes with audio
and images.
To learn how to copy files, see “Copying and Managing Files”in Chapter 4.
To use Microsoft Office Mobile
1. Select Start > Office Mobile.
2. Select the Office Mobile application that you want to use.
Word Mobile and Excel Mobile do not fully support some features of Microsoft®
Office Word and Microsoft® Office Excel®. Check the Windows Mobile web site to
find out which features are not supported in Word Mobile and Excel Mobile, .
Tips
•
By default, Word Mobile saves documents in .docx format, while Excel Mobile
saves workbooks in .xlsx format. If you want to open these types of files on a
computer that uses Microsoft Office 2000, Office XP, or Office 2003, you need
to download and install the File Format Converter in your computer. You
can find this converter at http://www.microsoft.com/downloads/details.
aspx?FamilyId=941B3470-3AE9-4AEE-8F43-C6BB74CD1466&displaylang=en.
•
•
If you want Word Mobile to save documents in .doc format, select Menu > Tools
> Options (or Menu > Options when no document is opened), then change the
Default template to Word 97-2003 Document (.doc).
If you want Excel Mobile to save workbooks in a format that is compatible with
Microsoft Office 2000, Office XP, or Office 2003, select Menu > Options (with no
workbook opened), then change the Template for new workbook to Blank 97-
2003 Workbook.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Other Applications 175
11.3 Speed Dial
You can create speed dial entries for frequently-called numbers or frequently-
accessed items so you can dial a number or access an item by pressing a single key.
To create a speed dial entry for a contact
1. On the Home panel, select Contacts.
2. Select a contact and press the TRACKBALL to view the contact details.
3. Select the desired phone number and select Menu > Add to Speed Dial.
4. Enter appropriate details in Name, Value, and Keypad assignment.
5. Select Done. To quit at any time during this process, select Menu > Cancel.
To create a speed dial entry for an item
1. On the Home screen, select Start then highlight the item you want.
2. Select Menu > Add Speed Dial.
3. Enter details in Name, Value, and Keypad assignment.
4. Select Done. To quit at any time during this process, select Menu > Cancel.
Notes
•
Number “0”and “1”keys are reserved and cannot be assigned as speed dial keys.
The number “1”key is reserved for voicemail. You can set any number between “2”
and “99”as a speed dial key. You must not set Keypad assignment to None. An
alert message appears when you do so.
•
If you assign a speed dial key that is already occupied, the new entry will replace
the existing entry.
To retrieve a voicemail message
On the Home screen, press and hold 1 to access your voice mailbox, and follow the
prompts to retrieve your messages.
Download from Www.Somanuals.com. All Manuals Search And Download.
176 Using Other Applications
To make a call or launch a program using Speed Dial
If you have assigned a speed dial key to a contact or a program in Speed Dial, do
the following to dial the contact’s number or open the associated program:
•
•
Press and hold the assigned key, if it is a single-digit speed dial number.
To dial a two-digit speed dial number, press the first number key first, and
then press and hold the second number key.
To delete a speed dial entry
1. On the Home screen, select Start > Applications > Speed Dial.
2. Select the desired entry and select Menu > Delete.
11.4 Voice Command
Voice Command lets you call your contacts, open applications, play back music,
and get calendar information just by using your voice. Voice Command only
responds to a set of predefined commands. You cannot create your custom
commands in Voice Command.
Pressing and holding the SHORTCUT KEY ( ) activates Voice Command. When
Voice Command is activated, the icon will appear at the upper-right corner of the
screen.
To call a contact
1. Hold the phone a few inches away from your mouth.
2. Press and hold the SHORTCUT KEY to activate Voice Command.
3. In a clear voice, say “Call [Contact Name].”
4. Voice Command will confirm with you the contact you want to call. After the
Voice Command confirmation, say “Yes”or “Correct.”
Note If Voice Command is wrong about the contact to call, say "No" or "Incorrect" to
try again.
5. The phone calls the contact.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Other Applications 177
To show the contact card of a contact
This will only show contacts that are saved on the phone.
1. Hold the phone a few inches away from your mouth.
2. Press and hold the SHORTCUT KEY to activate Voice Command.
3. In a clear voice, say “Show [Contact Name]”or “Lookup [Contact Name].”
To request information from your calendar
1. Hold the phone a few inches away from your mouth.
2. Press and hold the SHORTCUT KEY to activate Voice Command.
3. In a clear voice, say the information you want to retrieve. For example, “What’s
my next appointment?”or “What’s my next meeting?”
Consult the Voice Command help file to learn the other commands that you can
use to retrieve other Calendar information.
To open a program
1. Hold the phone a few inches away from your mouth.
2. Press and hold the SHORTCUT KEY to activate Voice Command.
3. In a clear voice, say “Open [Program Name].”
Tip
You can also say "Show [Program Name]" or "Start [Program Name]" to open
programs. Use the phrase that you are most comfortable with.
To request phone status information
1. Hold the phone a few inches away from your mouth.
2. Press and hold the SHORTCUT KEY to activate Voice Command.
3. In a clear voice, say the phone status information you want to retrieve. For
example, say “What time is it?”or “What date is it?”
Download from Www.Somanuals.com. All Manuals Search And Download.
178 Using Other Applications
To use Voice Command with a Bluetooth headset
Activate Voice Command from your Bluetooth headset by pressing the voice dial
button on the Bluetooth headset.
To get help in using Voice Command
1. Hold the phone a few inches away from your mouth.
2. Press and hold the SHORTCUT KEY to activate Voice Command.
3. In a clear voice, say “Help.”
You can also select Start > Applications > Voice Command and then select Menu
> Help to access the Voice Command Help, or visit the following web site for
information:
http://www.microsoft.com/windowsmobile/voicecommand/default.mspx.
11.5 Handango InHand
Handango InHand enables you to browse, purchase, and install applications for
your phone from one convenient location.
When you select Start > Internet Applications > Handango InHand, Internet
Explorer opens and displays the Handango InHand Welcome screen. Select
Download Now to download and install Handango InHand to your phone.
11.6 My Account
My Account enables you to view your minutes remaining, bill summary, make
payments, view additional plans and services, and more.
To open My Account
On the Home screen, select Start > My Account.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
A.1 Specifications
Processor
Qualcomm® MSM7225™, 528MHz
Operating system
Memory
Microsoft® Windows Mobile® 6.1 Standard
• ROM: 256 MB
• RAM: 192 MB
Dimensions (LxWxT) 4.59 x 2.42 x 0.47 inches
Weight
Display
Network
4.23 ounces with battery pack
2.4 inch TFT-LCD with QVGA resolution
HSDPA/WCDMA:
• 2100 MHz
• Up to 7.2 Mbps download speed
Quad-band GSM/GPRS/EDGE:
• 850/900/1800/1900 MHz
(Band frequency and data speed are operator dependent.)
Trackball with Center Select button
4-row QWERTY keyboard
Device Control
Keyboard
GPS
Internal GPS antenna
Connectivity
• Bluetooth® 2.0 with Enhanced Data Rate and A2DP for stereo
wireless headsets
• Wi-Fi®: IEEE 802.11 b/g
• HTC ExtUSB™ (11-pin mini-USB 2.0 and audio jack in one)
Download from Www.Somanuals.com. All Manuals Search And Download.
180 Appendix
Camera
2.0 megapixel color camera with fixed focus
Audio Supported
AAC, AAC+, eAAC+, AMR, AWB, QCP, MP3, WMA, WAV, MIDI
Formats
Video Supported
Formats
WMV, ASF, MP4, 3GP, 3G2, M4V, AVI
Battery
• Rechargeable Lithium-ion polymer battery
• Capacity: 1500 mAh
• Standby time: Up to 480 hours for WCDMA
Up to 380 hours for GSM
• Talk time: Up to 300 minutes for WCDMA
Up to 510 minutes for GSM
(The above are subject to network and phone usage.)
Expansion Slot
AC Adapter
microSD™ memory card
(SD 2.0 compatible, supporting up to 32 GB)
AC input: 100 ~ 240V AC, 50/60 Hz
DC output: 5V and 1A
Notes
•
•
The memory size figures are the total ROM and RAM memory available for use and
storage. Since the memory is shared by the operating system, applications, and
data, the actual available memory is less than what is specified.
Specifications are subject to change without prior notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 181
A.2 Regulatory Notices
Regulatory Agency Identifications
For regulatory identification purposes, your product is assigned a model number of
MAPL100.
To ensure continued reliable and safe operation of your device, use only the
accessories listed below with your MAPL100.
The Battery Pack has been assigned a model number of RHOD160.
This product is intended for use with a certified Class 2 power supply unit, rated 5
Volts DC, maximum 1 Amp.
Federal Communications Commission Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harm-ful interference to radio or TV reception, which can be determined by turning
the equipment on and off, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Download from Www.Somanuals.com. All Manuals Search And Download.
182 Appendix
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to
the device that are not expressly approved by HTC Corporation may void the user’s
authority to operate the equipment.
Safety precautions for RF exposure
•
Use only original manufacturer-approved accessories, or accessories that do
not contain any metal.
•
Use of non-original manufacturer-approved accessories may violate your
local RF exposure guidelines and should be avoided.
Exposure to Radio Frequency (RF) Signals
Your device contains a radio transmitter and receiver. The radiated output power
is far below the international radio frequency exposure limits. These limits are part
of comprehensive guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on the safety standards previously set
by international standards bodies:
•
•
American National Standards Institute (ANSI) IEEE. C95.1-1992
National Council on Radiation Protection and Measurement (NCRP). Report
86. 1986
•
•
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996
Ministry of Health (Canada), Safety Code 6. The standards include a
substantial safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The standard incorporates a
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 183
substantial margin of safety to give additional protection for the public and to
account for any variations in usage.
As with other mobile radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that no part of the human body be allowed to come too close to the
antenna during operation of the equipment.
Your device has an internal antenna. Use only the supplied integral antenna. Use of
unauthorized or modified antennas may impair call quality and damage the phone,
causing loss of performance and SAR levels exceeding the recommended limits as
well as result in non-compliance with local regulatory requirements in your country.
To assure optimal phone performance and ensure human exposure to RF energy
is within the guidelines set forth in the relevant standards; always use your
device only in its normal-use position. Do not touch or hold the antenna area
unnecessarily when placing or receiving a phone call.
Contact with the antenna area may impair call quality and cause your device to
operate at a higher power level than needed. Avoiding contact with the antenna
area when the phone is IN USE optimizes the antenna performance and the battery
life.
Body-worn measurements were tested for typical body-worn operations with the
back of the device kept 1.5 cm from the body.
Tests for SAR are conducted using standard operating positions specified by
the FCC with the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while operation can be well
below the maximum value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required to reach the network.
In general, the closer you are to a wireless base station antenna, the lower the
power output. Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The tests are performed in
Download from Www.Somanuals.com. All Manuals Search And Download.
184 Appendix
positions and locations (for example, at the ear and worn on the body) as required
by the FCC for each model. (Bodyworn measurements may differ among phone
models, depending upon available accessories and FCC requirements). For body
worn operation, to maintain compliance with FCC RF exposure guidelines, use only
original manufacturer approved accessories.
SAR Information
1.47W/kg @1g
Telecommunications & Internet Association (TIA) safety
information
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum
separation of six inches be maintained between a handheld wireless phone
and a pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers:
•
Should ALWAYS keep the phone more than six inches from their pacemaker
when the phone is turned ON.
•
•
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize the potential for
interference. If you have any reason to suspect that interference is taking
place, turn your phone OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event
of such interference, you may want to consult your service provider, or call the
customer service line to discuss alternatives.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 185
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if they are adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered
into force as European law on 13th February 2003, resulted in a major change in the
treatment of electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of WEEE, and
in addition, to promote the reuse, recycling and other forms of recovery of such
wastes so as to reduce disposal.
T
he WEEE logo on the product or on its box indicates that this product
must not be disposed of or dumped with your other household waste. You
are liable to dispose of all your electronic or electrical waste equipment
by relocating over to the specified collection point for recycling of such
hazardous waste. Isolated collection and proper recovery of your electronic
and electrical waste equipment at the time of disposal will allow us to help
conserving natural resources. Moreover, proper recycling of the electronic
and electrical waste equipment will ensure safety of human health and
environment. For more information about electronic and electrical waste
equipment disposal, recovery, and collection points, please contact your
local city centre, household waste disposal service, shop from where you
purchased the equipment, or manufacturer of the equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
186 Appendix
RoHS Compliance
This product is in compliance with Directive 2002/95/EC of the European
Parliament and of the Council of 27 January 2003, on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS) and its
amendments.
Download from Www.Somanuals.com. All Manuals Search And Download.
|