HP Hewlett Packard Switch JG325A User Manual

QuickSpecs  
Overview  
HP SFP+ Transceivers (SR, LRM, LR and ER)  
Models  
HP X132 10G SFP+ LC SR Transceiver  
HP X132 10G SFP+ LC LR Transceiver  
HP X132 10G SFP+ LC LRM Transceiver  
HP X132 10G SFP+ LC ER Transceiver  
J9150A  
J9151A  
J9152A  
J9153A  
DA - 13285 Worldwide — Version 3 — September 5, 2012  
Page 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QuickSpecs  
Technical Specifications  
HP SFP+ Transceivers (SR, LRM, LR and ER)  
HP X132 10G SFP+ LC LR Ports  
1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full only  
Transceiver (J9151A)  
Connectivity  
Connector type  
Wavelength  
LC  
1310 nm  
A 10-Gigabit transceiver in  
SFP+ form-factor that  
supports the 10-Gigabit LR  
standard, providing 10-  
Gigabit connectivity up to  
10 km on single-mode  
fiber.  
Physical characteristics Dimensions  
2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19  
cm)  
Weight  
0.04 lb. (.02 kg)  
Transceiver form factor SFP+  
Operating temperature 32°F to 158°F (0°C to 70°C)  
Environment  
Operating relative  
humidity  
0% to 85%, noncondensing  
Nonoperating/Storage  
temperature  
-40°F to 185°F (-40°C to 85°C)  
Altitude  
up to 10,000 ft. (3 km)  
0.9 W  
Electrical characteristics Power consumption  
typical  
Power consumption  
maximum  
1 W  
Cabling  
Cable type:  
Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and  
ISO/IEC 793-2 Type B1;  
Maximum distance:  
2m-10km with 9/125 µm single-mode cable  
Cable length  
Fiber type  
2m to 10km  
Single Mode  
Notes  
Conditioning patch cord cables are not supported.  
For fiber patch cords, use Ultra Physical Contact (UPC) surface  
termination/polish. Angled Physical Contact (APC) is not recommended.  
Services  
the service-level descriptions and product numbers. For details about services  
and response times in your area, please contact your local HP sales office.  
DA - 13285 Worldwide — Version 3 — September 5, 2012  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QuickSpecs  
Technical Specifications  
HP SFP+ Transceivers (SR, LRM, LR and ER)  
HP X132 10G SFP+ LC LRM Ports  
1 LC 10-GbE port (IEEE 802.3aq Type 10Gbase-LRM); Duplex: full only  
Transceiver (J9152A)  
Connectivity  
Connector type  
Wavelength  
LC  
1310 nm  
A 10-Gigabit transceiver in  
SFP+ form-factor that  
supports the 10-Gigabit  
LRM standard, for 10-  
Gigabit connectivity up to  
220 m on legacy  
Physical characteristics Dimensions  
2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19  
cm)  
Weight  
0.04 lb. (.02 kg)  
Transceiver form factor SFP+  
Operating temperature 32°F to 158°F (0°C to 70°C)  
Environment  
multimode fiber.  
Operating relative  
humidity  
0% to 85%, noncondensing  
Nonoperating/Storage  
temperature  
-40°F to 185°F (-40°C to 85°C)  
Altitude  
up to 10,000 ft. (3 km)  
0.7 W  
Electrical characteristics Power consumption  
typical  
Power consumption  
maximum  
1 W  
Cabling  
Cable type:  
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal  
content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2  
Type A1b or A1a, respectively (a mode conditioning patch cord may be needed  
in some multimode fiber installations);  
Maximum distance:  
0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km  
0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km  
0.5-100m with 50 µm multimode cable @ 400/400 MHz*km  
0.5-220m with 50 µm multimode cable @ 500/500 MHz*km  
0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km  
Cable length  
Fiber type  
0.5m to 220m  
Multi Mode  
Notes  
For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode-conditioning  
patch cord is not required. Other multimode cables may require mode-  
conditioning patch cords to achieve the maximum distances listed above.  
For fiber patch cords, use Ultra Physical Contact (UPC) surface  
termination/polish. Angled Physical Contact (APC) is not recommended.  
Services  
the service-level descriptions and product numbers. For details about services  
and response times in your area, please contact your local HP sales office.  
DA - 13285 Worldwide — Version 3 — September 5, 2012  
Page 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QuickSpecs  
Technical Specifications  
HP SFP+ Transceivers (SR, LRM, LR and ER)  
HP X132 10G SFP+ LC ER Ports  
1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-ER); Duplex: full only  
Transceiver (J9153A)  
Connectivity  
Connector type  
Wavelength  
LC  
1550 nm  
The SFP+ ER Transceiver  
will transmit 10Gbps over  
up to 40km using standard  
OM3 fiber cable. This  
Physical characteristics Dimensions  
2.22(d) x 0.55(w) x 0.47(h) in. (5.65 x 1.39 x 1.19  
cm)  
Weight  
.04 lb., Fully loaded  
product expands the HP  
Networking transceiver  
portfolio for connections  
from 0m to 40km. Use only  
genuine HP transceivers  
with your HP Networking  
equipment to ensure  
Transceiver form factor SFP+  
Operating temperature 32°F to 158°F (0°C to 70°C)  
Environment  
Operating relative  
humidity  
5% to 95%, noncondensing  
-40°F to 185°F (-40°C to 85°C)  
5% to 95%, noncondensing  
Nonoperating/Storage  
temperature  
reliability and support.  
Nonoperating/Storage  
relative humidity  
Altitude  
up to 10,000 ft. (3 km)  
1.3 W  
Electrical characteristics Power consumption  
typical  
Power consumption  
maximum  
1.5 W  
Cabling  
Cable type:  
Single-mode fiber optic, complying with ITU-T G.652;  
Maximum distance:  
40km  
Fiber type  
Single Mode  
Notes  
Check switch release notes for minimum version of software required to  
support this transceiver.  
Some switches have limits as to how many of this particular transceiver can  
be installed. See the release notes of the switch software/firmware being  
used for more details.  
Services  
the service-level descriptions and product numbers. For details about services  
and response times in your area, please contact your local HP sales office.  
© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.  
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and  
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial  
errors or omissions contained herein.  
DA - 13285 Worldwide — Version 3 — September 5, 2012  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Air Compressor H3372 User Manual
Hamilton Beach Coffeemaker c40515 User Manual
Hamilton Beach Espresso Maker Cappuccino Plus User Manual
Hasbro Games 59757 User Manual
Havis Shields Automobile Parts P REAR 2 User Manual
Healthrider Treadmill HRTL115101 User Manual
Honeywell Heat Pump T8511G User Manual
Hotpoint Range RGB735DEP User Manual
Hotpoint Washer WMUD 962 User Manual
IBM Personal Computer 6058 User Manual