ProCurve Switch 5400zl/3500yl Series
The ProCurve Switch 5400zl/3500yl series consists of the most
advanced intelligent edge switches in the ProCurve Networking product
line. The 5400zl series includes 6-slot and 12-slot chassis and
associated zl modules and bundles, and the 3500yl series includes
24-port and 48-port stackables. The foundation for all these switches
is a purpose-built, programmable ProVision ASIC that allows the most
demanding networking features, such as QoS and security, to be
implemented in a scalable yet granular fashion. With a variety of Gigabit
interfaces, integrated PoE on all 10/100/1000Base-T ports, 10-GbE
capability, and a choice of form factors, the 5400zl/3500yl switches
offer excellent investment protection, flexibility, and scalability, as well
as ease of deployment, operation, and maintenance.
ProCurve Switch 5406zl
Intelligent Edge (J8697A)
ProCurve Switch 5406zl-48G
Intelligent Edge (J8699A)
ProCurve Switch 5412zl
Intelligent Edge (J8698A)
ProCurve Switch 5412zl-96G
Intelligent Edge (J8700A)
ProCurve Switch
3500yl-24G-PWR
ProCurve Switch
3500yl-48G-PWR
Intelligent Edge (J8692A)
Intelligent Edge (J8693A)
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series
• Selectable queue configurations: increase
performance by selecting the number of
queues and associated memory buffering that
best meet the requirements of your network
applications
• ProCurve switch meshing: dynamically load-
balances across multiple active redundant links
to increase available aggregate bandwidth
• VLAN support and tagging: supports the
IEEE 802.1Q standard and 2,048 VLANs
simultaneously
Resiliency and high availability
• Virtual Router Redundancy Protocol (requires
Premium License): VRRP allows groups of two
routers to dynamically back each other up to
create highly available routed environments
• IEEE 802.1v protocol VLANs: isolate select
non-IPv4 protocols automatically into their
own VLANs
• GARP VLAN Registration Protocol: allows
automatic learning and dynamic assignment
of VLANs
• IEEE 802.1s Multiple Spanning Tree Protocol:
provides high link availability in multiple
VLAN environments by allowing multiple
spanning trees; encompasses IEEE 802.1D
Spanning Tree Protocol and IEEE 802.1w Rapid
Spanning Tree Protocol
Layer 3 services
• UDP helper function: UDP broadcasts can be
directed across router interfaces to specific IP
unicast or subnet broadcast addresses and
prevent server spoofing for UDP services such
as DHCP
• IEEE 802.3ad Link Aggregation Control
Protocol (LACP) and ProCurve trunking:
support up to 36 trunks, each with up to 8 links
(ports) per trunk; trunking across modules is
supported
• Loopback interface address: defines an
address in RIP and OSPF that can always be
reachable, improving diagnostic capability
• Hot-swappable modules (5400zl series):
permits modules, mini-GBICs, and power
supplies in a redundant power supply
configuration to be added or swapped without
interrupting the network
Layer 3 routing
• Static IP routing: provides manually
configured routing
• RIP: provides RIPv1 and RIPv2 routing at media
• Optional redundant power supply (5400zl
series): provides uninterrupted power and
allows hot-swapping of the redundant power
supplies when installed
speed
• OSPF (requires Premium License): includes
host-based ECMP to provide link
redundancy/scalable bandwidth and NSSA
• Sparing simplicity: ProCurve zl-common
accessories (interface modules, power supplies)
Security
Layer 2 switching
NEW
USB Secure Autorun* (requires ProCurve
Manager Plus): deploys, diagnoses, and
updates switch using USB flash drive; works
with secure credential to prevent tampering
NEW
IEEE 802.1ad Q-in-Q (requires Premium
License): increases the scalability of Ethernet
network by providing a hierarchical structure;
connects multiple LANs on high-speed campus
or metro network
• Switch CPU protection: provides automatic
protection against malicious network traffic
trying to shut down the switch
∗
Availability targeted for the second quarter of 2008.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series
• Identity-driven ACL: enables implementation
Features and benefits
(continued)
of a highly granular and flexible access security
policy specific to each authenticated network
user
• Virus throttling: detects traffic patterns typical
of WORM-type viruses and either throttles or
entirely prevents the ability of the virus to
spread across the routed VLANs or bridged
interfaces, without requiring external
appliances
• DHCP protection: blocks DHCP packets from
unauthorized DHCP servers, preventing denial-
of-service attacks
• BPDU port protection: blocks Bridge Protocol
Data Units (BPDU) on ports that do not require
BPDUs, preventing forged BPDU attacks
• ICMP throttling: defeats ICMP denial-of-
service attacks by enabling any switch port to
automatically throttle ICMP traffic
• Dynamic IP lockdown: works with DHCP
protection to block traffic from unauthorized
host, preventing IP source address spoofing
• Multiple user authentication methods:
– IEEE 802.1X: industry-standard way of user
authentication using an IEEE 802.1X
supplicant on the client in conjunction with a
RADIUS server
• Dynamic ARP protection: blocks ARP
broadcasts from unauthorized hosts,
preventing eavesdropping or theft of network
data
– Web-based authentication: authenticates
from Web browser for clients that do not
support 802.1X supplicant; customized
remediation can be processed on an external
Web server
NEW
STP Root Guard: protects root bridge from
malicious attack or configuration mistakes
• Detection of malicious attacks: monitors 10
types of network traffic and sends a warning
when an anomaly that potentially can be
caused by malicious attacks is detected
– MAC-based authentication: client is
authenticated with the RADIUS server based
on client’s MAC address
• Port security: allows access only to specified
MAC addresses, which can be learned or
specified by the administrator
• Authentication flexibility:
– Multiple IEEE 802.1X users per port:
provides authentication of multiple IEEE
802.1X users per port; prevents user
“piggybacking” on another user’s IEEE 802.1X
authentication
• MAC address lockout: prevents configured
particular MAC addresses from connecting to
the network
• Source-port filtering: allows only specified
ports to communicate with each other
– Concurrent IEEE 802.1X and Web or MAC
authentication schemes per port: switch
port will accept any of IEEE 802.1X and either
Web or MAC authentications
• TACACS+: eases switch management security
administration by using a password
authentication server
• Access control lists (ACLs): provide filtering
based on the IP field, source/destination IP
address/subnet, and source/destination
TCP/UDP port number on a per-VLAN or per-
port basis
• Secure Shell (SSHv2): encrypts all transmitted
data for secure, remote command-line
interface (CLI) access over IP networks
• Secure Sockets Layer (SSL): encrypts all HTTP
traffic, allowing secure access to the browser-
based management GUI in the switch
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series
• Secure FTP: allows secure file transfer to/from
the switch; protects against unwanted file
downloads or unauthorized copying of switch
configuration file
• Bandwidth shaping:
– Port-based rate limiting: per-port
ingress/egress enforced maximum
bandwidth
• Secure management access: all access
methods—CLI, GUI, or MIB—are securely
encrypted through SSHv2, SSL, and/or SNMPv3
– Classified-based rate limiting: use ACL to
enforce maximum bandwidth for ingress
traffic on each port
• Switch management logon security:
can require either RADIUS or TACACS+
authentication for secure switch CLI logon
– Guaranteed minimum: per-port, per-queue
egress-based guaranteed minimum
bandwidth
• Security banner: displays a customized
• Class of Service (CoS): sets the IEEE 802.1p
priority tag based on IP address, IP Type of
Service (ToS), L3 protocol, TCP/UDP port
number, source port, and DiffServ
security policy when users log in to the switch
Convergence
• IP multicast routing (Premium License):
includes PIM Sparse and Dense modes to route
IP multicast traffic
Services
ProCurve Switch 3500yl-24G-PWR Intelligent
Edge
• IP multicast snooping (data-driven IGMP):
automatically prevents flooding of IP multicast
traffic
• 3-year, 4-hour onsite, 13x5 coverage for
hardware (U2855E)
• LLDP-MED (Media Endpoint Discovery):
a standard extension of LLDP that stores values
for parameters such as QoS and VLAN to
automatically configure network devices such
as IP phones
• 3-year, 4-hour onsite, 24x7 coverage for
hardware (U2856E)
• 3-year, 4-hour onsite, 24x7 coverage for
hardware, 24x7 software phone support
(U6304E)
NEW
RADIUS VLAN for voice: uses standard
RADIUS attribute and LLDP to automatically
configure VLAN for IP phones
• 3-year, 24x7 software phone support, software
updates (UE262E)
NEW
PoE allocations: supports multiple methods
(automatic, 802.3af class, LLDP-MED, or user
specified) to allocate PoE power for optimal
energy saving
• Installation with minimum configuration,
system-based pricing (U4826E)
• Installation with HP-provided configuration,
system-based pricing (U4830E)
Quality of Service (QoS)
• Layer 4 prioritization: enables prioritization
based on TCP/UDP port numbers
• Traffic prioritization: allows real-time traffic
classification into 8 priority levels mapped to
8 queues
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series
• 3-year, 4-hour onsite, 24x7 coverage for
Services (continued)
hardware, 24x7 software phone support
(UE252E)
ProCurve Switch 3500yl-48G-PWR Intelligent
Edge
• 3-year, 24x7 software phone support, software
updates (UF786E)
• 3-year, 4-hour onsite, 13x5 coverage for
hardware (H4496E)
• Installation with minimum configuration,
system-based pricing (U4828E)
• 3-year, 4-hour onsite, 24x7 coverage for
hardware (H2893E)
• Installation with HP-provided configuration,
system-based pricing (U4832E)
• 3-year, 4-hour onsite, 24x7 coverage for
hardware, 24x7 software phone support
(U6319E)
ProCurve Switch 5412zl Intelligent Edge
ProCurve Switch 5412zl-96G Intelligent Edge
• 3-year, 24x7 software phone support, software
updates (UE264E)
• 3-year, 4-hour onsite, 13x5 coverage for
hardware (UE253E)
• Installation with minimum configuration,
system-based pricing (U4826E)
• 3-year, 4-hour onsite, 24x7 coverage for
hardware (UE254E)
• Installation with HP-provided configuration,
system-based pricing (U4830E)
• 3-year, 4-hour onsite, 24x7 coverage for
hardware, 24x7 software phone support
(UE255E)
ProCurve Switch 5406zl Intelligent Edge
ProCurve Switch 5406zl-48G Intelligent Edge
• 3-year, 24x7 software phone support, software
updates (UF788E)
• 3-year, 4-hour onsite, 13x5 coverage for
hardware (UE250E)
• Installation with minimum configuration,
system-based pricing (U4828E)
• 3-year, 4-hour onsite, 13x5 coverage for
hardware (H4496E)
• Installation with HP-provided configuration,
system-based pricing (U4832E)
• 3-year, 4-hour onsite, 24x7 coverage for
hardware (UE251E)
numbers and service-level descriptions.
For details about services and response times in
your area, please contact your local HP sales
office.
• 3-year, 4-hour onsite, 24x7 coverage for
hardware (H2893E)
• 3-year, 4-hour onsite, 24x7 coverage for
hardware, 24x7 software phone support
(U6319E)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series
Specifications
ProCurve Switch 5406zl Intelligent Edge (J8697A)
ProCurve Switch 5406zl-48G Intelligent Edge (J8699A)
Included accessories
Ports
N/A
2 ProCurve Switch zl 24-Port 10/100/1000 PoE Modules (J8702A)
1 ProCurve Switch zl 875W Power Supply (J8712A)
6 open module slots
4 open module slots
48 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T) with PoE
Media type: IEEE Auto-MDIX
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
1 RS-232C DB-9 console port
1 RS-232C DB-9 console port
Supports a maximum of 144 auto-sensing 10/100/1000 ports or
24 10-GbE ports or 144 mini-GBICs, or a combination
Supports a maximum of 144 auto-sensing 10/100/1000 ports with PoE or
16 10-GbE ports or 96 mini-GBICs, or a combination
Power supplies
2 open power-supply slots
Includes 1 x J8712A
1 open power-supply slot
Physical characteristics
Dimensions (D x W x H)
Weight
45.09 x 44.45 x 17.53 cm (17.75 x 17.5 x 6.9 in.) (4U height)
10.68 kg (23.55 lb.)
45.09 x 44.45 x 17.53 cm (17.75 x 17.5 x 6.9 in.) (4U height)
15.54 kg (34.26 lb.)
Memory and processor
Gigabit module
10G module
ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM
ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB
compact flash, 256 MB DDR SDRAM
ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM
ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash,
256 MB DDR SDRAM
Management module
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
Latency
<3.7 µs (FIFO 64-byte packets)
<2.1 µs (FIFO 64-byte packets)
Up to 214 million pps
288 Gbps
346 Gbps
10,000 entries
<3.7 µs (FIFO 64-byte packets)
<2.1 µs (FIFO 64-byte packets)
Up to 214 million pps
288 Gbps
346 Gbps
10,000 entries
1000 Mb
10 Gbps
Throughput
Routing/Switching capacity
Switch fabric speed
Routing table size
Environment
0°C to 55°C (32°F to 131°F); 0°C to 40°C with J8705A, J8706A, or
J8707A modules installed
0°C to 55°C (32°F to 131°F); 0°C to 40°C with J8705A, J8706A, or
J8707A modules installed
Operating temperature
15% to 95% @ 55°C (131°F), non-condensing
–40°C to 70°C (–40°F to 158°F)
15% to 95% @ 65°C (149°F), non-condensing
15% to 95% @ 55°C (131°F), non-condensing
–40°C to 70°C (–40°F to 158°F)
15% to 95% @ 65°C (149°F), non-condensing
Operating relative humidity
Non-operating/Storage temperature
Non-operating/Storage
relative humidity
Up to 4.6 km (15,000 ft.)
Power: 57 dB; pressure: 40.2 dB
ISO 7779, ISO 9296
Up to 4.6 km (15,000 ft.)
Power: 57 dB; pressure: 40.2 dB
ISO 7779, ISO 9296
Altitude
Acoustic
Electrical characteristics
Chassis ships without power supplies. Two power-supply slots available;
two different power supplies available. See power-supply products for
additional specifications.
One J8712A installed. One open power-supply slot available; two different
power supplies available. See power-supply products for additional
specifications.
Description
2,584 kJ/hr (2,450 BTU/hr) (max non-PoE)
3,903 kJ/hr (3,700 BTU/hr) (max using PoE)
100–127 VAC/200–240 VAC
2,584 kJ/hr (2,450 BTU/hr) (max non-PoE)
3,903 kJ/hr (3,700 BTU/hr) (max using PoE)
100–127 VAC/200–240 VAC
Maximum heat dissipation
Voltage
Frequency
Notes
50/60 Hz
50/60 Hz
Power supplies must be ordered separately. One J8712A or J8713A can
power the J8697A chassis.
Heat dissipation does not include heat dissipated by the PoE powered
devices themselves.
Heat dissipation does not include heat dissipated by the PoE powered
devices themselves.
Safety
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Emissions
Immunity
EN 55024, CISPR 24
EN 55024, CISPR 24
EN
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
ESD
Radiated
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV/2 kV AC
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV/2 kV AC
EFT/Burst
Surge
IEC 61000-4-6; 3 V
IEC 61000-4-6; 3 V
Conducted
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
EN 61000-3-2, IEC 61000-3-2
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
EN 61000-3-2, IEC 61000-3-2
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
EN 61000-3-3, IEC 61000-3-3
EN 61000-3-3, IEC 61000-3-3
Flicker
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series
Specifications
(continued)
ProCurve Switch 5406zl Intelligent Edge (J8697A)
ProCurve Switch 5406zl-48G Intelligent Edge (J8699A)
Management
Notes
ProCurve Manager Plus; ProCurve Manager (included); command-line interface; Web browser; configuration menu; out-of-band management
(serial RS-232C)
When using mini-GBICs with this product, mini-GBICs with revision “B” or later (product number ends with the letter “B” or later, e.g., J4858B, J4859C)
are required.
Standards and protocols
(applies to both products)
Device management
RFC 1591 DNS (client)
HTML and telnet management
IP multicast
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2787 VRRP MIB
RFC 2362 PIM Sparse Mode (Premium License)
RFC 3376 IGMPv3 (host joins only)
RFC 3973 PIM Dense Mode (Premium License)
General protocols
IEEE 802.1ad Q-in-Q (Premium License)
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IPv6
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address
Auto-configuration
RFC 2463 ICMPv6
RFC 2710 Multicast Listener Discovery (MLD)
for IPv6
IEEE 802.1Q VLANs
Network management
IEEE 802.1AB Link Layer Discovery Protocol
(LLDP)
RFC 2819 Four groups of RMON: 1 (statistics),
2 (history), 3 (alarm), and 9 (events)
RFC 3176 sFlow
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
IEEE 802.3af Power over Ethernet
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 3315 DHCPv6 (client only)
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
SNMPv1/v2c/v3
XRMON
OSPF
RFC 2328 OSPFv2 (Premium License)
RFC 3101 OSPF NSSA
RFC 793 TCP
RFC 4113 MIB for UDP
RFC 826 ARP
RFC 854 TELNET
RFC 868 Time Protocol
RFC 951 BOOTP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
QoS/Cos
RFC 2474 DiffServ Precedence, including
8 queues/port
RFC 1058 RIPv1
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 4419 Key Exchange for SSH
RFC 4541 IGMP & MLD Snooping Switch
RFC 1542 BOOTP Extensions
RFC 2030 Simple Network Time Protocol (SNTP)
v4
Security
MIBs
RFC 1213 MIB II
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv1/SSHv2 Secure Shell
RFC 2548 (MS-RAS-Vendor only)
RFC 3046 DHCP Relay Agent Information Option
RFC 3576 Ext to RADIUS (CoA only)
RFC 3768 VRRP (Premium License)
RFC 4675 RADIUS VLAN & Priority
UDLD (Uni-directional Link Detection)
RFC 1850 OSPFv2 MIB
RFC 2021 RMONv2 MIB
RFC 2096 IP Forwarding Table MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series
Specifications
ProCurve Switch 5412zl Intelligent Edge (J8698A)
ProCurve Switch 5412zl-96G Intelligent Edge (J8700A)
Included accessories
Ports
N/A
4 ProCurve Switch zl 24-Port 10/100/1000 PoE Modules (J8702A)
2 ProCurve Switch zl 875W Power Supplies (J8712A)
12 open module slots
8 open module slots
96 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T) with PoE
Media type: IEEE Auto-MDIX
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
1 RS-232C DB-9 console port
1 RS-232C DB-9 console port
Supports a maximum of 288 auto-sensing 10/100/1000 ports or
48 10-GbE ports or 288 mini-GBICs, or a combination
Supports a maximum of 288 auto-sensing 10/100/1000 ports with PoE or
32 10-GbE ports or 192 mini-GBICs, or a combination
4 open power-supply slots
Power supplies
Includes 2 x J8712A
2 open power-supply slots
Physical characteristics
Dimensions (D x W x H)
Weight
45.09 x 44.45 x 30.73 cm (17.75 x 17.5 x 12.1 in.) (7U height)
15.85 kg (34.94 lb.)
45.09 x 44.45 x 30.73 cm (17.75 x 17.5 x 12.1 in.) (7U height)
26.31 kg (58 lb.)
Memory and processor
Gigabit module
10G module
ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM
ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact
flash, 256 MB DDR SDRAM
ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM
ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM
Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash,
256 MB DDR SDRAM
Management module
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
Latency
<3.7 µs (FIFO 64-byte packets)
<2.1 µs (FIFO 64-byte packets)
Up to 428 million pps
576 Gbps
692 Gbps
10,000 entries
1000 Mb
10 Gbps
Throughput
Routing/Switching capacity
Switch fabric speed
Routing table size
<3.7 µs (FIFO 64-byte packets)
<2.1 µs (FIFO 64-byte packets)
Up to 428 million pps
576 Gbps
692 Gbps
10,000 entries
Environment
0°C to 55°C (32°F to 131°F); 0°C to 40°C with J8705A, J8706A, or
J8707A modules installed
Operating temperature
0°C to 55°C (32°F to 131°F); 0°C to 40°C with J8705A, J8706A, or
J8707A modules installed
15% to 95% @ 55°C (131°F), non-condensing
–40°C to 70°C (–40°F to 158°F)
15% to 95% @ 65°C (149°F), non-condensing
Operating relative humidity
Non-operating/Storage temperature
Non-operating/Storage
relative humidity
15% to 95% @ 55°C (131°F), non-condensing
–40°C to 70°C (–40°F to 158°F)
15% to 95% @ 65°C (149°F), non-condensing
Up to 4.6 km (15,000 ft.)
Power: 64 dB; pressure: 57.5 dB
ISO 7779, ISO 9296
Altitude
Acoustic
Up to 4.6 km. (15,000 ft)
Power: 64 dB; pressure: 57.5 dB
ISO 7779, ISO 9296
Electrical characteristics
Chassis ships without power supplies. Four power-supply slots
available; two different power supplies available. See power-supply
products for additional specifications.
Description
Two J8712A installed. Two open power-supply slots available; two different
power supplies available. See power-supply products for additional
specifications.
5,169 kJ/hr (4,900 BTU/hr) (max non-PoE)
7,807 kJ/hr (7,400 BTU/hr) (max using PoE)
100–127 VAC/200–240 VAC
Maximum heat dissipation
5,169 kJ/hr (4,900 BTU/hr) (max non-PoE)
7,807 kJ/hr (7,400 BTU/hr) (max using PoE)
100–127 VAC/200–240 VAC
Voltage
Frequency
Notes
50/60 Hz
50/60 Hz
Power supplies must be ordered separately. A combination of two
power supplies either J8712A or J8713A is required to power the
J8698A chassis.
Heat dissipation does not include heat dissipated by the PoE powered
devices themselves.
Heat dissipation does not include heat dissipated by the PoE powered
devices themselves.
Safety
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Emissions
Immunity
EN 55024, CISPR 24
EN
EN 55024, CISPR 24
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
ESD
Radiated
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV/2 kV AC
IEC 61000-4-6; 3 V
EFT/Burst
Surge
Conducted
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV/2 kV AC
IEC 61000-4-6; 3 V
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction,
25 periods
Power frequency magnetic field
Voltage dips and interruptions
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction,
25 periods
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
Harmonics
Flicker
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series
Specifications
(continued)
ProCurve Switch 5412zl Intelligent Edge (J8698A)
ProCurve Switch 5412zl-96G Intelligent Edge (J8700A)
Management
Notes
ProCurve Manager Plus; ProCurve Manager (included); command-line interface; Web browser; configuration menu; out-of-band management
(serial RS-232C)
When using mini-GBICs with this product, mini-GBICs with revision “B” or later (product number ends with the letter “B” or later, e.g., J4858B, J4859C)
are required.
Standards and protocols
(applies to both products)
Device management
RFC 1591 DNS (client)
HTML and telnet management
IP multicast
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2787 VRRP MIB
RFC 2362 PIM Sparse Mode (Premium License)
RFC 3376 IGMPv3 (host joins only)
RFC 3973 PIM Dense Mode (Premium License)
General protocols
IEEE 802.1ad Q-in-Q (Premium License)
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IPv6
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address
Auto-configuration
RFC 2463 ICMPv6
RFC 2710 Multicast Listener Discovery (MLD)
for IPv6
IEEE 802.1Q VLANs
Network management
IEEE 802.1AB Link Layer Discovery Protocol
(LLDP)
RFC 2819 Four groups of RMON: 1 (statistics),
2 (history), 3 (alarm), and 9 (events)
RFC 3176 sFlow
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
IEEE 802.3af Power over Ethernet
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 3315 DHCPv6 (client only)
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
SNMPv1/v2c/v3
XRMON
OSPF
RFC 2328 OSPFv2 (Premium License)
RFC 3101 OSPF NSSA
RFC 793 TCP
RFC 4113 MIB for UDP
RFC 826 ARP
RFC 854 TELNET
RFC 868 Time Protocol
RFC 951 BOOTP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
QoS/Cos
RFC 2474 DiffServ Precedence, including
8 queues/port
RFC 1058 RIPv1
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 4419 Key Exchange for SSH
RFC 4541 IGMP & MLD Snooping Switch
RFC 1542 BOOTP Extensions
RFC 2030 Simple Network Time Protocol (SNTP)
v4
Security
MIBs
RFC 1213 MIB II
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv1/SSHv2 Secure Shell
RFC 2548 (MS-RAS-Vendor only)
RFC 3046 DHCP Relay Agent Information Option
RFC 3576 Ext to RADIUS (CoA only)
RFC 3768 VRRP (Premium License)
RFC 4675 RADIUS VLAN & Priority
UDLD (Uni-directional Link Detection)
RFC 1850 OSPFv2 MIB
RFC 2021 RMONv2 MIB
RFC 2096 IP Forwarding Table MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series
Specifications
ProCurve Switch 3500yl-24G-PWR Intelligent Edge (J8692A)
ProCurve Switch 3500yl-48G-PWR Intelligent Edge (J8693A)
Ports
1 open module slot
1 open module slot
20 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Media type: Auto-MDIX
44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Media type: Auto-MDIX
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
1 RS-232C DB-9 console port
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
1 RS-232C DB-9 console port
4 dual-personality ports—each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type
100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or
an open mini-GBIC slot (for use with mini-GBIC transceivers)
Supports a maximum of 4 10-GbE ports
4 dual-personality ports—each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type
100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an
open mini-GBIC slot (for use with mini-GBIC transceivers)
Supports a maximum of 4 10-GbE ports
Physical characteristics
Dimensions (D x W x H)
Weight
39.2 x 44.3 x 4.4 cm (15.43 x 17.44 x 1.73 in.) (1U height)
6.4 kg (14.11 lb.)
43.0 x 44.3 x 4.4 cm (16.93 x 17.44 x 1.73 in.) (1U height)
7.3 kg (16.09 lb.)
Memory and processor
10G module
Management module
ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz,
4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM
ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz,
4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
Latency
<3.7 µs (FIFO 64-byte packets)
<2.1 µs (FIFO 64-byte packets)
Up to 74 million pps
101 Gbps
115 Gbps
10,000 entries
<3.7 µs (FIFO 64-byte packets)
<2.1 µs (FIFO 64-byte packets)
Up to 110 million pps
148 Gbps
173 Gbps
10,000 entries
1000 Mb
10 Gbps
Throughput
Routing/Switching capacity
Switch fabric speed
Routing table size
Environment
0° to 55°C (32°F to 131°F); 32°F to 40°C (104°F) when used with
any X2 10-GbE
0° to 55°C (32°F to 131°F); 32°F to 40°C (104°F) when used with
any X2 10-GbE
Operating temperature
15% to 95% at 40°C (104°F), non-condensing
–40°C to 70°C (–40°F to 158°F)
15% to 90% at 65°C (149°F), non-condensing
15% to 95% at 40°C (104°F), non-condensing
–40°C to 70°C (–40°F to 158°F)
15% to 95% at 65°C (149°F), non-condensing
Operating relative humidity
Non-operating/Storage temperature
Non-operating/Storage
relative humidity
Up to 4.6 km (15,000 ft.)
Power: 52.7 dB; pressure: 44.8 dB
ISO 7779, ISO 9296
Up to 4.6 km (15,000 ft.)
Power: 55.1 dB; pressure: 45.3 dB
ISO 7779, ISO 9296
Altitude
Acoustic
Electrical characteristics
The switch automatically adjusts to any voltage between 100–127 and
200–240 volts and either 50 or 60 Hz
706 kJ/hr (670 BTU/hr) (max non-PoE)
991 kJ/hr (940 BTU/hr) (max using PoE)
100–127 VAC/200–240 VAC
The switch automatically adjusts to any voltage between 100–127 and
200–240 volts and either 50 or 60 Hz
854 kJ/hr (810 BTU/hr) (max non-PoE)
1,149 kJ/hr (1,090 BTU/hr) (max using PoE)
100–127 VAC/200–240 VAC
Description
Maximum heat dissipation
Voltage
10.0 A/5.0 A
10.0 A/5.0 A
Current
723 W
50/60 Hz
759 W
50/60 Hz
Power consumption
Frequency
Notes
Maximum power draw if not using any PoE power is 200 W
(1.8 A @ 110 V, 0.9 A @ 220V); full load switch only heat spec listed
above subtracts heat dissipated in external PoE powered devices.
Heat dissipation does not include heat dissipated by the PoE powered
devices themselves.
Maximum power draw if not using any PoE power is 200 W
(1.8 A @ 110 V, 0.9 A @ 220V).
Heat dissipation does not include heat dissipated by the PoE powered
devices themselves.
Safety
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Emissions
Immunity
EN 55024, CISPR 24
EN 55024, CISPR 24
EN
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
ESD
Radiated
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV/2 kV AC
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV/2 kV AC
EFT/Burst
Surge
IEC 61000-4-6; 3 V
IEC 61000-4-6; 3 V
Conducted
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
EN 61000-3-2, IEC 61000-3-2
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
EN 61000-3-2, IEC 61000-3-2
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
EN 61000-3-3, IEC 61000-3-3
EN 61000-3-3, IEC 61000-3-3
Flicker
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series
Specifications
(continued)
ProCurve Switch 3500yl-24G-PWR Intelligent Edge (J8692A)
ProCurve Switch 3500yl-48G-PWR Intelligent Edge (J8693A)
Management
Notes
ProCurve Manager Plus; ProCurve Manager (included); command-line interface; Web browser; configuration menu; out-of-band management
(serial RS-232C)
When using mini-GBICs with this product, mini-GBICs with revision “B” or later (product number ends with the letter “B” or later, e.g., J4858B, J4859C)
are required.
J8177B Gigabit 1000Base-T mini-GBIC is not supported on the 3500yl series switches.
Device management
RFC 1591 DNS (client)
HTML and telnet management
IP multicast
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2787 VRRP MIB
Standards and protocols
(applies to both products)
RFC 2362 PIM Sparse Mode (Premium License)
RFC 3376 IGMPv3 (host joins only)
RFC 3973 PIM Dense Mode (Premium License)
General protocols
IEEE 802.1ad Q-in-Q (Premium License)
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IPv6
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address
Auto-configuration
RFC 2463 ICMPv6
RFC 2710 Multicast Listener Discovery (MLD)
for IPv6
IEEE 802.1Q VLANs
Network management
IEEE 802.1AB Link Layer Discovery Protocol
(LLDP)
RFC 2819 Four groups of RMON: 1 (statistics),
2 (history), 3 (alarm), and 9 (events)
RFC 3176 sFlow
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
IEEE 802.3af Power over Ethernet
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 3315 DHCPv6 (client only)
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
SNMPv1/v2c/v3
XRMON
OSPF
RFC 2328 OSPFv2 (Premium License)
RFC 3101 OSPF NSSA
RFC 793 TCP
RFC 4113 MIB for UDP
RFC 826 ARP
RFC 854 TELNET
RFC 868 Time Protocol
RFC 951 BOOTP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
QoS/Cos
RFC 2474 DiffServ Precedence, including
8 queues/port
RFC 1058 RIPv1
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 4419 Key Exchange for SSH
RFC 4541 IGMP & MLD Snooping Switch
RFC 1542 BOOTP Extensions
RFC 2030 Simple Network Time Protocol (SNTP)
v4
Security
MIBs
RFC 1213 MIB II
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv1/SSHv2 Secure Shell
RFC 2548 (MS-RAS-Vendor only)
RFC 3046 DHCP Relay Agent Information Option
RFC 3576 Ext to RADIUS (CoA only)
RFC 3768 VRRP (Premium License)
RFC 4675 RADIUS VLAN & Priority
UDLD (Uni-directional Link Detection)
RFC 1850 OSPFv2 MIB
RFC 2021 RMONv2 MIB
RFC 2096 IP Forwarding Table MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series Modules
zl Modules
ProCurve Switch zl 4-Port 10-GbE X2 Module
(J8707A)
ProCurve Switch zl 24-Port 10/100/1000 PoE Module
(J8702A)
4-port 10-GbE X2 module for zl series switches
24-port 10/100/1000 PoE module for zl series switches
Ports
Ports
4 open 10-GbE X2 transceiver slots
24 RJ-45 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T;
IEEE 802.3u Type 100Base-TX; IEEE 802.3ab Type 1000Base-T)
Media type: IEEE Auto-MDI/MDIX
Physical characteristics
Dimensions (D x W x H): 26.16 x 20.65 x 4.45 cm
(10.3 x 8.13 x 1.75 in.)
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
Weight: 0.79 kg (1.74 lb.)
Physical characteristics
Dimensions (D x W x H): 26.16 x 20.65 x 4.45 cm
(10.3 x 8.13 x 1.75 in.)
Environment
Operating temperature: 0°C to 40°C (32°F to 104°F)
Weight: 0.98 kg (2.16 lb.)
Notes
Cabling
When installed in a zl chassis, the J8707A module limits the operating
temperature range of the chassis to 0°C to 40°C (32°F to 104°F).
Type:
• 1000Base-T: Category 5 (5E or better recommended), 100 Ω differential
4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP)
balanced, complying with IEEE 802.3ab 1000Base-T
ProCurve Switch zl 20-Port 10/100/1000 + 4-Port
Mini-GBIC Module (J8705A)
ProCurve Switch zl 4-Port 10-GbE CX4 Module
(J8708A)
20-port 10/100/1000 PoE + 4-port mini-GBIC module for zl series
4-port 10-GbE CX4 module for zl series switches
switches
Ports
Ports
4 CX-4 10-GbE ports (IEEE 802.3ak Type 10Gbase-CX4)
Duplex: full only
4 open mini-GBIC (SFP) slots
20 RJ-45 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T;
IEEE 802.3u type 100Base-TX; IEEE 802.3ab Type 1000Base-T)
Media type: IEEE Auto-MDIX
Physical characteristics
Dimensions (D x W x H): 26.16 x 20.65 x 4.45 cm
(10.3 x 8.13 x 1.75 in.)
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
Weight: 0.79 kg (1.74 lb.)
Physical characteristics
Dimensions (D x W x H): 26.16 x 20.65 x 4.45 cm
(10.3 x 8.13 x 1.75 in.)
Environment
Operating temperature: 0°C to 55°C (32°F to 131°F)
Weight: 1 kg (2.2 lb.)
Cabling
Notes
Maximum distance:
When using mini-GBICs with this product, mini-GBICs with revision “B” or
later (product number ends with the letter “B” or later, e.g., J4858B,
J4859C) are required.
15 m using CX4 cable
300 m using optical media converters and multimode fiber cable
When installed in a zl chassis, the J8705A module limits the operating
temperature range of the chassis to 0°C to 40°C (32°F to 104°F).
Notes
Use CX4 10-GbE cable (0.5 m–15 m) or ProCurve 10-GbE CX4 Media
Converter (J8439A).
No CX4 cables are included with this module.
Services for accessories are covered under the product in which they are installed.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series Modules
zl Modules (continued)
yl Modules
ProCurve Switch zl 24-Port Mini-GBIC Module
(J8706A)
ProCurve Switch yl 10-GbE 2-Port CX4 + 2-Port X2
Module (J8694A)
24-port mini-GBIC module for zl series switches
10-GbE module with two fixed CX4 ports and two X2 slots for ProCurve
Switch 3500yl series and Switch 6200yl-24G-mGBIC
Ports
24 open mini-GBIC (SFP) slots
Ports
2 open 10-GbE X2 transceiver slots
2 10-GbE ports (IEEE 802.3ak Type 10Gbase-CX4)
Duplex: full only
Physical characteristics
Dimensions (D x W x H): 26.16 x 20.65 x 4.45 cm
(10.3 x 8.13 x 1.75 in.)
Weight: 0.91 kg (2.01 lb.)
Physical characteristics
Dimensions (D x W x H): 19.7 x 19.1 x 36.3 cm (7.76 x 7.52 x 14.29 in.)
Weight: 0.7 kg (1.54 lb.)
Notes
When using mini-GBICs with this product, mini-GBICs with revision “B” or
later (product number ends with the letter “B” or later, e.g., J4858B,
J4859C) are required.
When installed in a zl chassis, the J8706A module limits the operating
temperature range of the chassis to 0°C to 40°C (32°F to 104°F).
Environment
Operating temperature: 0°C to 55°C (32°F to 131°F)
Operating relative humidity: 15% to 95%, non-condensing
Non-operating/Storage temperature: –40°C to 70°C (–40°F to 158°F)
Non-operating/Storage relative humidity: 15% to 90%, non-condensing
Cabling
Maximum distance:
CX4: 15 m using CX4 cable or 300 m using media converter with ribbon MMF
Notes
Only the two fixed CX4 ports on this module support ProCurve 10-GbE CX4
Media Converter (J8439A).
Operating temperature is 0°C to 40°C (32°F to 104°F) if any X2 10-GbE
optic or transceiver is inserted in any X2 slot.
One 0.5 m CX4 cable is included.
Licenses
Premium License for Switch 3500 Series (J8993A)
Premium License for Switch 5400 Series (J8994A)
License to enable OSPFv2, PIM Dense mode, PIM Sparse mode, VRRP,
and QinQ in the ProCurve 3500yl switch.
License to enable OSPFv2, PIM Dense mode, PIM Sparse mode, VRRP,
and QinQ in the ProCurve 5400zl switch.
Notes
Notes
The following features are included in this license:
The following features are included in this license:
• OSPFv2
• OSPFv2
• PIM Dense mode
• PIM Sparse mode
• VRRP
• PIM Dense mode
• PIM Sparse mode
• VRRP
• QinQ (IEEE 802.1ad)
• QinQ (IEEE 802.1ad)
Services for accessories are covered under the product in which they are installed.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series Modules
Power Supplies
ProCurve Switch zl 1500W Power Supply (J8713A)
High-power 1500 W power supply for zl series switches. Supplies 900 W
for PoE power plus 600 W for switch power. 200–240 V only.
ProCurve Switch zl 875W Power Supply (J8712A)
Standard 875 W power supply for zl series switches. Supplies 273 W for
PoE power plus 600 W for switch power.
Physical characteristics
Dimensions (D x W x H): 15.37 x 18.92 x 12.95 cm
(6.05 x 7.45 x 5.1 in.)
Physical characteristics
Dimensions (D x W x H): 15.37 x 18.92 x 12.95 cm
(6.05 x 7.45 x 5.1 in.)
Weight: 3.4 kg (7.5 lb.)
Weight: 3.2 kg (7.05 lb.)
Environment
Environment
Operating temperature: 0°C to 55°C (32°F to 131°F)
Operating relative humidity: 15% to 95%, non-condensing
Non-operating/Storage temperature: –40°C to 70°C (–40°F to 158°F)
Non-operating/Storage relative humidity: 15% to 95%, non-condensing
Altitude: up to 3 km (10,000 ft.)
Operating temperature: 0°C to 55°C (32°F to 131°F)
Operating relative humidity: 15% to 95%, non-condensing
Non-operating/Storage temperature: –40°C to 70°C (–40°F to 158°F)
Non-operating/Storage relative humidity: 15% to 95%, non-condensing
Altitude: up to 3 km (10,000 ft.)
Electrical characteristics
Voltage: 200–240 VAC
Current: 10 A
Electrical characteristics
Voltage: 100–127 VAC/200–240 VAC
Current: 12 A/5.7 A
Frequency: 50/60 Hz
Power consumption: 1800 W
Frequency: 50/60 Hz
Power consumption: 1050 W
Notes
Notes
200–240 V only. Installation of the J8713A reduces the chassis altitude
specification to 3677 m (10,000 ft.).
J8712A supplies 600 W chassis power and 273 W PoE power.
One J8712A can power the J8697A chassis.
Two J8712A supplies are required to power the J8698A chassis.
See the Ordering Guide for more details on power supply selection for
PoE power.
J8713A supplies 600 W chassis power and 900 W PoE power.
See the Ordering Guide for more details on power supply selection for PoE
power. Units shipped to North America include a NEMA L6-20P twist lock
power cord. Non-locking NEMA 6-20P optionally available—see the
Ordering Guide for more details.
When used in the J8714A power shelf, the following specs apply (at
full load):
When used in the J8714A power shelf, the following specs apply (at
full load):
• Heat dissipation: 263 kJ/hr (250 BTU/hr) @ 110 V, 222 kJ/hr
(210 BTU/hr) @ 220 V
• Heat dissipation: 475 kJ/hr (450 BTU/hr) @ 220 V
• Maximum current: 5.1 A @ 220 V
• Maximum current: 3.2 A @ 110 V, 1.7 A @ 220 V
NEW ProCurve 620 Redundant/External Power Supply
(J8696A)
Provides redundant system power and/or extra PoE power for up to two
switches simultaneously
NEW ProCurve Switch zl Power Supply Shelf (J8714A)
A rack-mountable chassis with two slots for Switch zl power supplies to
supply additional PoE power to a zl switch beyond what can be provided by
the switch internal power supplies alone
Ports
2 EPS ports
Ports
2 RPS ports; 195 W available per port
2 EPS ports; 398 W available per port
PoE power available depends on power supplies installed
Physical characteristics
Dimensions (D x W x H): 24.71 x 44.3 x 13.2 cm
(9.73 x 17.44 x 5.2 in.) (3U height)
Physical characteristics
Dimensions (D x W x H): 39.12 x 44.2 x 4.39 cm
(15.4 x 17.4 x 1.73 in.) 1U height
Weight: 6.89 kg (15.2 lb.)
Weight: 4.2 kg (9.26 lb.) (no power supplies installed)
Environment
Electrical characteristics
Operating temperature: 0°C to 55°C (32°F to 131°F)
Operating relative humidity: 15% to 95% at 40°C (104°F), non-condensing
Non-operating/Storage temperature: –40°C to 70°C (–40°F to 158°F)
Non-operating/Storage relative humidity: 15% to 95% at 40°C (104°F),
non-condensing
Maximum heat dissipation: 422 kJ/hr (400 BTU/hr) for the actual 620
itself. PoE-powered device heat dissipation assumed to be outside the
620.
Voltage: 100–127 VAC/200–240 VAC
Current: 16 A/8 A
Power consumption: 1440 W
RPS power: 390 W
Altitude: up to 3 km (10,000 ft.)
Acoustic: power: 52.9 dB, pressure: 42.9 dB
PoE power: 796 W
RPS: 12 V
PoE: –50 V
Frequency: 50/60 Hz
Note: Above figures are for max. RPS and PoE power being supplied to 2
switches simultaneously. 200–240 V power cords shipped with the 620
have a wall plug rated as close to 13 A as specific country standards
allow.
Electrical characteristics
Description: Power draw and heat dissipation for the power shelf are
dependent on the power supplies installed.
Note: For heat dissipation and power requirements of the power shelf, find
and add together these figures for the 1 or 2 power supplies actually
installed.
Notes
The ProCurve Switch zl Power Supply Shelf has two slots for zl power
supplies. It supplies PoE power only to zl switches. For yl switches, see
the ProCurve 620 Redundant/External Power Supply.
Power shelf depth includes 1.9 cm (0.75 in.) due to the power supply
handles.
Notes
The ProCurve 620 supports the ProCurve 2900 series (RPS), 3500yl
series (RPS/PoE), and 6200yl (RPS) switches.
The ProCurve 5400zl switches are not supported.
The ProCurve 620 includes 4 2-meter RPS/EPS cables. These cables can
be used to carry either RPS or PoE power to the switch being powered.
Power supplies not included.
Services for accessories are covered under the product in which they are installed.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ProCurve Switch 5400zl/3500yl Series Modules
For more information
Additional accessories
ProCurve Wireless Edge Services zl Module
(J9051A)
To learn more about ProCurve
Networking, please visit
ProCurve Redundant Wireless Services zl
Module (J9052A)
ProCurve Gigabit-SX-LC Mini-GBIC (J4858C)
ProCurve Gigabit-LX-LC Mini-GBIC (J4859C)
ProCurve Gigabit-LH-LC Mini-GBIC (J4860C)
ProCurve Gigabit 1000Base-T Mini-GBIC
(J8177B)*
ProCurve 100-FX SFP-LC Transceiver (J9054B)
ProCurve 10-GbE X2-SC SR Optic (J8436A)
ProCurve 10-GbE X2-SC LR Optic (J8437A)
ProCurve 10-GbE X2-SC ER Optic (J8438A)
ProCurve 10-GbE CX4 Media Converter (J8439A)
ProCurve 10-GbE X2-CX4 Transceiver (J8440B)
ProCurve Identity Driven Manager 2.2 base
product—500-user license (J9012A)
ProCurve Manager Plus 2.2 unlimited-device
license (J9059A)
* Not supported on dual-personality ports on 3500yl series.
© 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
ARM is a registered trademark of ARM Limited.
4AA1-6637EEE, January 2008
Download from Www.Somanuals.com. All Manuals Search And Download.
|