Administrator's Guide for Microsoft® Windows®
on HP ProLiant WS460c G6 Workstation Blades
with WS460c Graphics Expansion Blades
Part Number 582461-002
March 2010 (Second Edition)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction.................................................................................................................................. 6
Overview ....................................................................................................................................................6
Contacting HP technical support or an authorized reseller................................................................................6
WS460c video subsystem overview...............................................................................................................7
Video subsystem architecture and operating modes .........................................................................................7
Setting Remote Console mode .......................................................................................................................8
User mode.........................................................................................................................................8
Admin mode......................................................................................................................................8
Server mode......................................................................................................................................9
Setup mode.......................................................................................................................................9
WS460c installation process overview.........................................................................................................10
Installing and powering on the workstation blade..........................................................................................10
Preparing the workstation blade infrastructure.....................................................................................11
Configuring the workstation blade hardware ......................................................................................11
Connecting media to the workstation blade ........................................................................................12
Powering on the workstation blade ....................................................................................................12
Workstation blade sleep states ....................................................................................................................12
OOBE screens ...........................................................................................................................................13
Configuring and verifying networking ..........................................................................................................13
Configuring NIC 1 and NIC 2...........................................................................................................13
Verifying iLO 2 network....................................................................................................................13
Installing, configuring, and verifying RGS.....................................................................................................14
Setting the RGS NIC binding order ....................................................................................................14
Verifying RGS operation ...................................................................................................................15
Installing applications.................................................................................................................................15
Verifying functionality.................................................................................................................................16
Integrating additional workstation blades and client computers.......................................................................16
Creating a custom Windows image.............................................................................................. 17
Creating a custom Windows image for the WS460c Workstation Blade .........................................................17
Creating a custom Windows® image process...............................................................................................17
Required components .................................................................................................................................17
Optional software ......................................................................................................................................18
Creating the Windows® XP image ..............................................................................................................18
Configuring the operating system.................................................................................................................20
Installing the applications............................................................................................................................22
Deploying the Windows image ...................................................................................................................22
Windows® XP-64 on the workstation blade..................................................................................................23
Windows® XP-64 processes .......................................................................................................................23
Using Windows Vista® on the workstation blade........................................................................... 25
Acquiring Windows Vista®.........................................................................................................................25
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Windows Vista®..........................................................................................................................25
Windows Vista® installation steps ...............................................................................................................25
Viewing the Windows Vista® desktop..........................................................................................................26
Capturing a workstation blade image using HP Insight Rapid Deployment Software........................... 27
Using HP Insight Rapid Deployment Software................................................................................................27
Using HP Insight Rapid Deployment Software for Windows® XP-64 ................................................................30
Performing an unattended installation of Windows® XP.................................................................. 33
Unattended installations..............................................................................................................................33
Unattended installation procedure................................................................................................................33
User information......................................................................................................................... 42
User information introduction.......................................................................................................................42
Powering on the HP workstation blade client.................................................................................................42
Changing the behavior of RGS....................................................................................................................42
Connecting from the client to the blade.........................................................................................................43
Using Enterprise Directory.................................................................................................................43
Using a local directory file ................................................................................................................44
Using manual entry ..........................................................................................................................44
Sending Ctrl+Alt+Delete to the workstation blade..........................................................................................45
Accessing workstation blade desktop windows .............................................................................................45
Moving desktop windows between monitors .................................................................................................46
Spanning multiple displays with a desktop window .......................................................................................46
Maximizing a window to a single display.....................................................................................................46
Supported USB devices...............................................................................................................................47
Synchronizing a PDA..................................................................................................................................47
Adjusting audio volume on the client and blade ............................................................................................47
Disconnecting the client from the workstation blades......................................................................................48
Reconnecting to disconnected sessions .........................................................................................................48
Managing the workstation blade.................................................................................................. 49
Workstation blade management overview ....................................................................................................49
Onboard Administrator...............................................................................................................................49
Integrated Lights-Out 2 (iLO 2).....................................................................................................................50
Accessing iLO 2...............................................................................................................................50
iLO 2 Remote Console......................................................................................................................50
Viewing the Windows® desktop........................................................................................................50
iLO 2 virtual media ..........................................................................................................................51
Remote Desktop Connection........................................................................................................................51
System Management Homepage .................................................................................................................51
Local access to SMH ........................................................................................................................52
HP SIM .....................................................................................................................................................52
HP Rapid Deployment Software...................................................................................................................52
HP Insight Rapid Deployment Software content....................................................................................52
Infrastructure requirements.................................................................................................................52
Rapid Deployment Software-specific differences between server blades and workstation blades...............53
Using Rip-n-Replace and Virtual Bay features to replace failed systems...................................................54
HP Insight Diagnostics ................................................................................................................................54
Key features and benefits..................................................................................................................54
Theory of operation..........................................................................................................................54
Accessing HP Insight Diagnostics.......................................................................................................55
Saving and printing information in HP Insight Diagnostics ....................................................................57
Download from Www.Somanuals.com. All Manuals Search And Download.
Downloading the latest version of HP Insight Diagnostics......................................................................58
ROM-Based Setup Utility .............................................................................................................................58
Power-on Self Test ......................................................................................................................................58
BIOS Serial Console...................................................................................................................................59
BIOS programming ....................................................................................................................................59
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Overview
For an overview of the HP Workstation Blade Solution, including its architecture, HP recommends that you
•
•
•
•
HP ProLiant Workstation Blades
HP Remote Graphics Software User Guide
HP Workstation Blade Client Series—Embedded OS Version 9.xx Manual
Administrator guides
This Administrator Guide provides information for Microsoft® Windows® XP Pro SP2, Microsoft®
Windows® XP Pro x64 Edition, and Windows Vista® (both 32-bit and 64-bit versions).
Contacting HP technical support or an authorized
reseller
Before contacting HP, always attempt to resolve problems by completing the procedures in this guide.
IMPORTANT: Collect the appropriate server information and operating system information
before contacting HP for support.
For the name of the nearest HP authorized reseller:
•
See the Contact HP worldwide (in English) webpage
For HP technical support:
•
In the United States, for contact options see the Contact HP United States webpage
o
Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days a
week. For continuous quality improvement, calls may be recorded or monitored.
o
If you have purchased a Care Pack (service upgrade), call 1-800-633-3600. For more
•
In other locations, see the Contact HP worldwide (in English) webpage
Introduction
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Workstation blade video subsystem
WS460c video subsystem overview
This chapter describes the workstation blade video subsystem. Because the workstation blade contains
two types of video controllers, you must be familiar with their functionality and operating modes.
•
ATI RN50 video controller (ATI video controller)—The ATI Video controller is built into the
workstation blade.
•
NVIDIA Quadro FX graphics adapter (NVIDIA graphics adapter)—The WS460c Workstation Blade
supports NVIDIA graphics adapters in single-card and dual-card configurations. See Hardware and
Software Supported by HP ProLiant Workstation Blades.
HP offers the HP Graphics Expansion Blade (expansion blade), which attaches only to the workstation
blade. The expansion blade supports the installation of certain PCI-Express NVIDIA Quadro FX graphics
adapters.
If an expansion blade is not attached to the workstation blade, NVIDIA graphics adapters are installed in
the WS460c Workstation Blade. If an expansion blade is attached, graphics adapters can only be
installed in the expansion blade, not in the workstation blade. Unless otherwise noted, no distinction is
made in this chapter based on where the graphics adapters are installed internally to the WS460c
Workstation Blade or in the expansion blade, because installation location is not visible to the Windows®
operating system.
Video subsystem architecture and operating modes
The key features of the video subsystem are:
•
The workstation blade boot console is generated by the ATI video controller. The boot console can
be viewed either by connecting a monitor to the video output of the Local I/O Connector or can be
viewed over the network using the iLO 2 Ethernet port.
•
•
The Windows® desktop runs on the NVIDIA graphics adapter in User Mode only.
You can view the Windows® desktop on internally installed NVIDIA graphics adapters using RGS.
You can view the video directly if he graphics connectors are present.
•
Operation of the workstation blade ATI video controller and NVIDIA graphics adapter is governed
by the BIOS parameter Remote Console Mode, which can be set to the following modes:
o
o
o
o
o
User Mode (default setting)
Admin Mode
Server Mode
Setup Mode
HP Graphics Expansion x16 mode (only for WS460c Graphics Expansion Blade)
Workstation blade video subsystem
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Remote Console mode
Remote Console Mode can be viewed or changed during POST, when the boot console is generated by
the ATI video controller in all Remote Console modes. To view or set Remote Console Mode during
booting:
1.
Using either the Local I/O Connector or the iLO 2 Ethernet port, view the boot console using iLO 2,
which provides direct control of the workstation blade power.
2.
3.
4.
When prompted during booting, press the F9 key. The ROM-based Setup Utility appears.
Select System Options > Remote Console Mode. The current Remote Console Mode appears.
To change the Remote Console Mode, press Enter. The Remote Console Mode menu appears. Use
the Up and Down arrow keys to select the desired mode. When Admin Mode has been selected,
press Enter when done and perform the steps indicated to exit the ROM-based Setup Utility.
The workstation blade performs a reboot, and then the Remote Console Mode appears.
User mode
When Remote Console Mode is set to User Mode, the boot console is generated by the ATI video
controller. As booting of the Windows® operating system begins, the NVIDIA graphics adapter generates
the Windows® desktop.
In User Mode, the Windows® desktop can only be viewed using RGS through both NIC1 and NIC2 or
either NIC1 and NIC2. Because the ATI video controller is inactive after the operating system starts, the
Windows® desktop is not visible on the Local I/O Connector or through iLO 2. The screen displays a
message stating that the blade is in User Mode.
The default setting of Remote Console Mode is User Mode. This setting enables custom images (loaded
through processes such as PXE booting) to boot directly into User Mode without needing to change
Remote Console Mode from its default setting.
In addition to viewing the Windows® desktop generated by one of the video controllers, you can also
view the Windows® desktop using Microsoft® Remote Desktop Connection (RDC). For more information
These viewing methods cannot be used simultaneously. If RDC is started, the Windows® desktop session
provided by the video controller is terminated and returns to a Windows® login screen. If the user logs
into the operating system while RDC is active, the RDC connection is terminated.
Admin mode
When Remote Console Mode is set to Admin Mode, the ATI video controller first generates the boot
console during POST, and then generates the Windows® desktop. In this mode, the NVIDIA graphics
adapter is not visible to any Windows® operating systems, and is not used.
In Admin Mode, the boot console and the Windows® desktop generated by the ATI video controller can
be viewed in the following ways:
•
•
•
Using a monitor connected to the Local I/O Connector video signal
Using the iLO 2 Remote Console by pointing your browser to the iLO 2 IP address
Using RDC
Workstation blade video subsystem
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Server mode
When Remote Console Mode is set to Server Mode, the ATI video controller generates the boot console
during POST and then generates the Windows® desktop. In this mode, the NVIDIA graphics adapter is
not visible to any Windows® operating systems and is not used.
In Server Mode, the boot console and the Windows® desktop generated by the ATI video controller can
be viewed in the following ways:
•
•
•
Using a monitor connected to the Local I/O Connector video signal
Using the iLO 2 Remote Console by pointing your browser to the iLO 2 IP address
Using RDC
Setup mode
Setup Mode is very similar to Admin Mode, the ATI video controller first generates the boot console and
then generates the Windows® desktop. In Setup Mode, however, the NVIDIA graphics adapter, although
it is not used, is visible to a Windows® operating system.
Visibility of the NVIDIA graphics adapter enables the Windows® operating system to install the NVIDIA
graphics adapter driver the first time the workstation blade boots. For more information about the initial
In Setup Mode, the Windows® desktop can be viewed in the following ways:
•
•
•
Using a monitor connected to the Local I/O Connector video signal
Using the iLO 2 Remote Console by pointing your browser to the iLO 2 IP address
Using RDC
Workstation blade video subsystem
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the workstation blade
WS460c installation process overview
This chapter describes the following process to install, power on, boot and validate the HP Workstation
Blade Solution:
1.
2.
Set up the client computer.
Install and power on the first workstation blade by performing these steps:
a. Prepare the blade enclosure and the networking infrastructure.
b. Configure the workstation blade hardware.
c. Install the workstation blade into the enclosure and then boot the operating system.
Configure the operating system.
3.
4.
5.
Verify network connections to the workstation blade Ethernet ports: NIC1, NIC2, and iLO 2.
Install RGS on the workstation blade, and then verify RGS operation between the workstation blade
and the client computer.
6.
7.
Install the required applications on the workstation blade.
Validate the solution consisting of the workstation blade, the applications, RGS, and the client
computer.
You can integrate other workstation blades and client computers into the solution.
Installing and powering on the workstation blade
For an overview see the HP ProLiant WS460c Workstation Blade with WS460c Graphics Expansion
Blade Installation Instructions. Because the workstation blade shares many components with the server
blade, see the following server blade documents for details on the installing and turning on the
workstation blade:
•
•
•
•
•
•
•
HP BladeSystem c7000 Enclosure Setup and Installation Guide
Power Supply Installation Instructions for HP BladeSystem c7000 Enclosures
HP BladeSystem c3000 Enclosure Setup and Installation Guide
HP BladeSystem c3000 Tower Enclosure Setup and Installation Guide
HP ProLiant BL460c Server Blade User Guide
HP BladeSystem Onboard Administrator User Guide
Integrated Lights-Out 2 User Guide
In addition, see your network interconnect device documentation.
Operating the workstation blade 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the workstation blade infrastructure
To prepare the workstation blade infrastructure (enclosure, power supplies, Onboard Administrator
modules, and networking), perform the following steps:
1.
To set up the enclosure, including wiring the PDUs, follow the instructions in the HP BladeSystem
c7000 Enclosure Setup and Installation Guide.
2.
Install power supplies in the enclosure according to the HP BladeSystem power guidelines on the HP
3.
4.
5.
6.
Install the Onboard Administrator modules. If you are using multiple c3000 or c7000 Enclosures,
connect the Onboard Administrator module in each enclosure to the uplink/downlink Ethernet
connectors in each module.
Install your network devices in the enclosure, and then connect them to your site network
infrastructure. Hardware and Software Supported by HP ProLiant Workstation Blades describes the
c7000 Enclosure interconnect bay mappings for the WS460c Workstation Blade.
Connect power to the enclosure and power it up. When the enclosure is powered up for the first
time, Insight Display launches an installation wizard. Complete the configuration process, and then
verify no installation or configuration errors appear on the Insight Display.
Verify the Onboard Administrator module and network devices can be accessed over the network
from the PC.
Configuring the workstation blade hardware
The workstation blade hardware is configured before installing the blade in the enclosure. Unless
otherwise noted, the hardware listed can be configured on the WS460c Workstation Blade.
•
Intel® Xeon® processors—The workstation blade supports Intel® Xeon® processors, offering multiple
frequencies of each processor type. In dual processor configurations, both processors must be
identical. For a description of the processors that are available for each workstation blade, see
Hardware and Software Supported by HP ProLiant Workstation Blades.
•
•
Memory—Up to 12 memory DIMMs can be installed in the workstation blade, supporting up to 192
GB of memory for the WS460c Workstation Blade. For a description of per-OS memory limitations,
see Hardware and Software Supported by HP ProLiant Workstation Blades.
HP Graphic Expansion Blade—The graphics expansion blade comes attached to the top of the
workstation blade and accommodates full length PCI-Express graphics cards.
The graphics expansion blade can only be purchased factory-attached to the workstation blade.
•
NVIDIA Quadro FX graphics adapter—The WS460c Workstation Blade supports a number of
graphics adapters, which can be ordered factory-installed or as after market option kits. For a list of
the NVIDIA graphics adapters that are available, see Hardware and Software Supported by HP
ProLiant Workstation Blades.
•
•
Disk drives—The WS460c Workstation Blade supports one or two SAS or SATA disk drives.
BBWC—The WS460c Workstation Blade can be ordered with either of these BBWC:
o
o
BBWC with 256 MB of memory.
BBWC with 512 MB of memory.
For the latest information about BBWC, see the HP website.
Operating the workstation blade 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting media to the workstation blade
The workstation blade architecture supports three primary methods of connecting media to the blade (such
as a CD/DVD drive).
•
•
•
Connecting media to one of the USB connectors on the Local I/O Cable
Connecting a shared network drive to the blade
Using iLO 2 virtual media to mount PC media (such as a CD/DVD drive) to the workstation blade
In addition, the c3000 Enclosure supports an optional DVD drive that can be used to install the operating
system or software on a workstation blade. Using the c3000 Onboard Administrator, the DVD drive can
be attached to any or all workstation blades in the enclosure.
Powering on the workstation blade
You can power on the workstation blade by using the Local I/O Cable, iLO 2 Remote Console, or
Onboard Administrator. If you use the Local I/O Cable, then blade verification is not dependent on iLO 2
networking (which, by default, requires a DHCP server to assign the IP address). If you use the Local I/O
Cable, you can confirm that the iLO 2 IP address is set and you have the option of using the iLO 2
Remote Console.
HP recommends using the Local I/O Cable to power on the first workstation blade. When it has been
verified (including DHCP assignment of the NIC1, NIC2, and iLO 2 IP addresses), subsequent workstation
blades can be powered on using the iLO 2 Remote Console. This is consistent with a building block
approach.
To power on the workstation blade using the Local I/O Cable:
1.
Install the workstation blade in the c3000 or c7000 Enclosure. Because the blade is hot-pluggable, it
can be inserted and removed while the enclosure is powered.
2.
Connect the Local I/O Cable to the Local I/O Connector on the front of the workstation blade.
Connect a monitor, USB keyboard, and USB mouse to the Local I/O Cable.
Depending on how you interact with the workstation blade and how many USB devices you have
connected to the Local I/O Cable (such as a keyboard and mouse), you might have to add a USB
hub to connect additional USB devices, such as a USB CD/DVD drive.
3.
4.
Power on the blade by pressing the front panel Power On button. The boot sequence appears on the
monitor. Set Remote Console Mode to Setup Mode, save the BIOS setting, and then continue with
the boot process.
If using the Graphics Expansion Blade, allow the Onboard Administrator to power up the blade.
Workstation blade sleep states
The workstation blade supports two sleep states: S0 (fully on) and S5 (off but connected to power). Do not
use any other power management states (such as Hibernate or Standby). From sleep state S5, WOL is
supported by both NIC1 and NIC2. However, a workstation blade in sleep state S5 is unable to respond
to an RGS connection request from a client computer, which results in an RGS connection failure
appearing on the client computer. When WOL occurs, the workstation blade boots into your operating
system, an RGS connection can be established by the client computer.
Operating the workstation blade 12
Download from Www.Somanuals.com. All Manuals Search And Download.
OOBE screens
When the workstation blade boots the operating system for the first time, it cycles through a number of
OOBE screens. These screens enable you to configure several Windows parameters, including:
•
•
•
•
•
•
Region, keyboard layout, and input language
Time zone
End User License Agreement
Automatic Updates (enable or disable)
Computer name
Administrator password
During the OOBE configuration process, the Administrator password screen appears. You must set an
Administrator password. Without an Administrator password, RGS cannot authenticate, and no client
connection is possible through an administrator account.
After completing the OOBE process, the workstation blade reboots into your operating system.
Configuring and verifying networking
You must verify that the workstation blade is accessible over the network using NIC1, NIC2, and iLO 2.
By default, the NIC1, NIC2, and iLO 2 IP addresses are set by DHCP. Therefore, ensure that the
workstation blade can connect to a DHCP server.
Configuring NIC 1 and NIC 2
The following steps are based on continued use of a keyboard, mouse, and monitor connected to the
Local I/O Cable.
To verify NIC1 and NIC2:
1.
Choose one of the following options:
o
From a Windows® operating system, use the ipconfig command to verify that the NIC1 and
NIC2 IP addresses have been set by DHCP.
o
Specify a static IP address and Subnet mask for each NIC.
2.
To verify NIC1 and NIC2 operation, access the blade SMH from your PC. Point a browser window
at each IP address using HTTPS protocol and port 2381. The SMH page appears using each NIC.
Verifying iLO 2 network
1.
Obtain the iLO 2 IP address by choosing one of the following methods:
o
o
Reboot the blade. During the reboot, the boot console displays the iLO 2 IP address.
Log in to SMH, and click Embedded NEC98431 under Management Processor, which displays
the iLO 2 IP address.
o
Use Onboard Administrator.
2.
Point your PC browser window to the iLO 2 IP address (using HTTPS). The login screen appears.
Operating the workstation blade 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing, configuring, and verifying RGS
RGS (specifically, the RGS Sender) is not factory-installed on the workstation blade. You must obtain RGS
from HP, and then have it installed on your workstation blade. A License Agreement Certificate is shipped
with your workstation blade that enables you to download RGS at no cost from HP. See the certificate for
downloading instructions.
You can also purchase and install RGS 5.3.0 or later. To purchase RGS 5.3.0, go to the RGS homepage
a license to operate-for licensing details, see the HP RGS Licensing Guide, available on the RGS
homepage.
Download RGS to your PC (not directly to the workstation blade). The RGS Sender installation software
can be made accessible by the workstation blade in several ways, including:
•
Map the workstation blade C: drive to your PC, and then copy the RGS files to the workstation blade
drive.
•
Copy the RGS software to a CD, and then use iLO 2 virtual media from your PC to make the CD
accessible by the workstation blade.
Included with the RGS download is the HP Remote Graphics User Guide. Microsoft® Remote Desktop
Connection can be used to remotely install the RGS Sender.
RGS supports remote USB, which enables USB devices connected to the client computer to be attached to
the workstation blade. This enables the workstation blade to access the USB devices as if they are
connected directly to the workstation blade. During RGS installation, you are queried whether you want to
enable remote USB. If you decide later to change remote USB (for example, to enable it from a disabled
state), you must uninstall and reinstall the RGS Sender.
Setting the RGS NIC binding order
Because the workstation blade (the RGS Sender) has two network ports (NIC1 and NIC2), you must be
careful when establishing a connection from the client computer (the RGS Receiver). The RGS Sender
might listen on one NIC while the RGS Receiver is trying to establish a connection on the other NIC. The
RGS Sender binds to the first NIC detected during booting. To determine the IP address of the first NIC,
perform the following steps on the workstation blade:
1.
2.
To view both NICs, click Start>Control Panel>Network Connections.
Double-click each LAN icon and the Support tab, which displays the NIC IP addresses, but not which
NIC is considered the first one.
3.
To determine which NIC is the first one, click Advanced>Advanced Setting in the Network
Connections window. The Advanced Settings window appears. The first NIC is listed at the top in
the Connections box.The first NIC is Local Area Connection 3, which has an IP address of
10.10.42.59. This is the NIC that the workstation blade listens to an RGS connection.
The arrows to the right of the Connections box can be used to change the order of the NICs to
specify which NIC will be used by the RGS Sender.
Before verifying RGS operation, set Remote Console Mode to User Mode by rebooting the workstation
blade and selecting User Mode. The RGS Sender can operate only with the NVIDIA graphics adapter
(which is active in User Mode).
Operating the workstation blade 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Verifying RGS operation
RGS connections are initiated from the client computer-see the RGS User Guide available at
information on how to establish an RGS connection. While RGS supports several operating modes, HP
recommends that you first attempt to establish a connection in Normal Mode, which is the simplest
operating mode.
RGS operation (as characterized by interactivity, security, and reliability) is dependent on your network
design.
Installing applications
The workstation blade does not contain any removable-media storage devices (such as a CD/DVD drive
or diskette drive). Therefore, you must first make the application installation package accessible by the
workstation blade when installing applications. The four most common methods to make the package
accessible are:
•
Blade hard drive—Copy the application installation package over the network to the workstation
blade hard drive, and run the installation from the hard drive.
•
PC hard drive—Copy the application installation package to the hard drive of your PC. Log into the
workstation blade from your PC using RGS, and then map the PC hard drive to the blade. Using
RGS, run the installation package on the blade using the mapped network drive from the PC. A
variation of this method is to save the installation package on a shared network drive, map the
shared drive to the blade, and then install the application from the network drive.
•
•
Local I/O Cable CD/DVD drive—Connect a USB CD/DVD drive to the Local I/O Cable, and install
the application from a CD or DVD.
iLO 2 virtual media—From your PC, use iLO 2 to connect to the workstation blade. Use the iLO 2
Remote Console and Virtual Media capabilities to connect the required media device from the PC to
the workstation blade.
When the application installation package is accessible by the workstation blade, the installation can be
initiated from your PC from the following devices:
•
•
•
•
RGS (requires User Mode)
iLO 2 Remote Console (requires Admin Mode, Setup Mode, or Server Mode)
Windows® Remote Desktop Connection
A keyboard, mouse, and monitor connected to the Local I/O Cable
Each installation method has advantages and limitations:
•
Local installation using USB devices connected to the Local I/O Cable-This is generally the most
reliable method, particularly for installations requiring multiple media. However, this method requires
that you be physically present at the blade. A variation of this approach is to only attach the media
using the Local I/O Cable, and then interact with the workstation blade remotely using RGS, RDC,
or the iLO 2 Remote Console. However, manipulating media locally at the workstation blade while
interacting remotely can be cumbersome.
•
Copying the installation package to a hard drive (either on the workstation blade or the PC)-This
method might not be possible, depending on the application installation procedure used. In
particular, installations requiring multiple CDs or diskettes may not work with this method.
Operating the workstation blade 15
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Applications that depend on detection of the NVIDIA graphics adapter-The iLO 2 Remote Console
and Local I/O Cable environments both require that the ATI video controller is displaying the
Windows® desktop. If application installation depends on detection of the NVIDIA graphics
adapter, an incorrect installation might result.
•
•
Using RDC—If application installation depends on detection of the NVIDIA graphics adapter, an
incorrect installation might result.
Application installations that require a midway reboot-Both the Windows® RDC and RGS
environments terminate their connections when the blade reboots. If application installation requires
a midway reboot, RDC or RGS reconnection is required after the reboot.
After selecting the application installation method, install the applications using the installation process
specified by each application.
Verifying functionality
1.
2.
Launch the workstation blade applications from the client computer.
Verify the applications work correctly, and provide the functionality, performance, and interactivity.
Integrating additional workstation blades and client
computers
To ensure that each added device operates correctly with the existing solution components, HP
recommends that you perform verification after each workstation blade and client computer is installed.
For example, after integrating a new workstation blade into the solution, you can verify that RGS operates
between the new workstation blade and an existing client computer.
Operating the workstation blade 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a custom Windows image
Creating a custom Windows image for the WS460c
Workstation Blade
This chapter describes how to create a custom Windows® image for the WS460c Workstation Blade.
You must include factory-installed components in your custom Windows® image.
Creating a custom Windows® image process
There are several ways to create a custom Windows image. This section describes creating the image by
using the Windows® CD and adding the required software such as device drivers. All interactions are
accomplished using a keyboard, mouse, CD/DVD drive, and monitor connected to the Local I/O Cable.
Required components
To create a custom Windows image, the following software and hardware components are required:
•
A way of connecting a diskette drive and a CD/DVD drive to the blade. This connection can be
made in any of the following manners:
o
Local I/O Cable—Connect a USB hub, USB keyboard, USB mouse, USB CD/DVD drive, USB
diskette drive, and a monitor to the Local I/O Cable. A USB hub is required, because the Local
I/O Cable only has two USB connectors while four are required.
o
PC—From a PC, use iLO 2 Remote Console and virtual media to connect a diskette drive and
CD/DVD drive to the blade.
•
Microsoft® Windows® installation CD with integrated Service Pack 2—The Microsoft® Volume
License media or a retail version can be used. There is no activation required with Volume License
media. Unlike other HP workstation products, operating system installation cannot be performed
using the Windows® XP SP2 operating system CD included in the Restore Plus! CD set.
•
•
HP Remote Graphics Software—This CD is required for installation of the RGS Sender on the
workstation blade.
Diskette containing the HP Smart Array P410i SAS controller drivers—Store the following files in the
root directory of a diskette. These files are for Windows® XP 32-bit only:
o
o
o
o
o
hpcissm2.cat
hpcissm2.sys
hpcissx2.inf
txtsetup.oem (created by the software component for Windows® XP 32-bit)
hpciss2.pdb
Creating a custom Windows image 17
Download from Www.Somanuals.com. All Manuals Search And Download.
To extract these folders from the HP Package Setup window, select Extract. You are prompted to
specify the folder in which you want the files to be extracted.
•
CD containing the following required drivers-Download and store the following SoftPaqs on a CD:
o
o
o
o
o
ATI ES1000 graphics driver
NVIDIA FX graphics driver
HP NC-Series Broadcom 10GbE Multifunction driver
HP ProLiant Integrated Lights-Out 2 Management Interface driver
HP ProLiant iLO 2 Advanced and Enhanced System Management Controller health driver
Optional software
The following software components are optional, and can be downloaded from the workstation blade
software and drivers website:
•
•
CD containing SMH—SMH enables the status of the blade to be remotely monitored.
CD containing HP Insight Management Agents—The Management Agents are required if SMH is
installed, or if HP SIM is used to remotely manage the blade.
Creating the Windows® XP image
1.
Connect a monitor, USB hub, keyboard, mouse, diskette drive, and CD/DVD drive to the Local I/O
Cable.
2.
Cycle power on the blade to initiate a reboot. When the BIOS console appears, change the BIOS
Remote Console Mode to Setup Mode. Setup Mode causes the NVIDIA graphics adapter and ATI
video adapter to both be visible to the Windows® operating system to ensure correct driver
installation.
3.
Boot to the ISO image with both the floppy and diskette driver (HPcissm2) mounted using the virtual
media.
4.
5.
Boot the workstation blade from the Windows® XP CD.
Immediately after booting the Windows® operating system from the CD, press the F6 key when
prompted. This step is required to install third-party drivers. The HP Smart Array P410i SAS controller
driver is installed.
6.
When prompted, press the S key to indicate the availability of a diskette with the P410i SAS
controller driver. Press Enter.
Creating a custom Windows image 18
Download from Www.Somanuals.com. All Manuals Search And Download.
7.
8.
9.
When prompted for the driver diskette, insert the diskette containing the HP Smart Array P410i SAS
controller drivers, and then press Enter.
Select the Windows® 2000 Driver for Smart Array P410i SAS controller driver. Press Enter to install
the driver.
When prompted, press Enter to begin the Windows® XP installation.
10. When prompted, select the manual installation option.
11. When prompted, press F8 to accept the Microsoft® End-User Agreement.
12. Partition the hard drive. If your drive is bigger than 80Gb, verify that the partition to which you are
installing the OS is 80Gb or less.
13. Install Windows® XP Pro in this newly-created partition.
14. Enter C to proceed with manual installation.
15. If the Windows® setup GUI prompts you for unsigned drivers, click Yes to install drivers that have
not passed Windows® Logo testing.
16. Customize Windows® XP Pro by answering the Microsoft® OOBE questions, such as the time zone
and computer name.
17. Enter the 25-character product key that identifies your copy of Windows® XP Professional.
18. Set the regional and language options.
19. From the Computer Name and Administrator Password screen, enter an Administrator password
(required for the workstation blade). Both RGS and Windows® Remote Desktop Connection require
access to a password-protected account. The password enables most of the remaining system
configuration and application installation tasks to be performed over the network using RGS or
Remote Desktop Connection.
20. Install the following drivers:
o
o
o
o
o
ATI ES1000 graphics driver for the ATI video controller
Broadcom NetXtreme Gigabit LAN driver for the NC532i
NVIDIA Quadro FX graphics adapter driver
HP ProLiant Integrated Lights-Out 2 Management Interface driver
HP ProLiant iLO 2 Advanced and Enhanced System Management Controller health driver
21. (Optional) HP recommends installing the following QFEs:
o
o
o
o
o
Windows® 2007 Time Zone Update (Q928388)
HTML Help Vulnerability (Q896358)
DhcpRequestParams function broken on SP2 (Q885270)
DEP enabled Windows® SP2 system fail resume (Q889673)
Vulnerabilities in Windows® XP-32 kernel (Q890859)
22. If you are installing the management agents (recommended), two additional components are
required, which must be installed in the following order:
a. SNMP—This component is installed as follows:
i. Open the Windows Components Wizard. Select Management and Monitoring Tools, and then
click Details. Select Simple Network Management Protocol, and then click OK.
ii. Verify that SNMP Service in the Windows Component Services box displays Started. Right
click SNMP Service, select Properties, and then click the Security tab. Ensure that the
properties appear. If not, modify the Accepted community names. Other community names
Creating a custom Windows image 19
Download from Www.Somanuals.com. All Manuals Search And Download.
can be used. To modify the Integrated Management Log with the management agents, you
must have a READ WRITE community defined.
b. HP Insight Management Agents—You must also have this component to use SMH or HP SIM.
Configuring the operating system
After the Windows® operating system starts, configure it as follows:
1.
2.
3.
Configure a solid-color Windows® wallpaper to maximize RGS performance.
If needed, configure WOL.
Turn off all power management functions (for example, hibernation) so that the workstation blade is
powered on and available to respond to requests.
4.
5.
Configure the Start > Shut Down menu to have two options, Restart and Log off. Remove the Shut
down, Stand by, and Hibernate options, because they require administrator intervention to power up
the blade.
Configure the Windows® Firewall—The Windows® XP Professional SP2 Internet Connection
Firewall has default settings that are too restrictive for many of the remote access and management
functions. HP recommends the following firewall exceptions:
o
o
o
Windows® Remote Desktop Connection—Remote Desktop program exception
Windows® Remote Assistance—Remote Assistance program exception
Windows® File and Print Sharing (required for Rapid Deployment Pack)—File and Printer
Sharing program exception
o
o
o
HP Remote Graphics Software—Add C:\Program Files\Hewlett-Packard
Remote Graphics Sender—\rgsender.exe program exception
SMH—Add the port exceptions listed in the table.
Description
Port
2301
2381
5988
5989
22
Protocol
HTTP
HP SMH Web Server
HP SMH Secure Web Server
WBEM/WMI Mapper
WBEM/WMI Mapper (Secure)
SSH Port
HTTPS
HTP
HTTPS
SSH
SNMP Agent
161
162
—
SNMP
SNMP Trap
ICMP
SNMP Agent
Ping Discovery (ICMP)
Ping Discovery (TCP)
Management Processor
80
HTTP
443
HTTPS
When configuring ports for HP SMH and HP SIM, see the HP Customer Advisory HP Systems Insight
Manager and HP System Management Homepage Do Not Function Properly After Upgrade to Microsoft
Windows XP SP2. This advisory can be found by searching on the Customer Advisory number,
Description
Port
Protocol
RGS Sender
42966
SSL
Creating a custom Windows image 20
Download from Www.Somanuals.com. All Manuals Search And Download.
If HP Rapid Deployment Pack is used, enable the File and Print Sharing program exception. Also add the
port exceptions listed in the following table to enable HP Rapid Deployment Pack access to the
workstation blade.
Port
Type
Description
53
TCP
RDP DNS and SQL
53
67
UDP
TCP
RDP DNS
RDP DHCP REQ
68
TCP
TCP
TCP
TCP
UDP
UDP
TCP
UDP
TCP
TCP
TCP
UDP
TCP
TCP
UDP
TCP
TCP
TCP
TCP
TCP
TCP
TCP
TCP
TCP
TCP
TCP
TCP
TCP
TCP
TDP DHCP REP
69
RDP M-TFTP
80
RDP iLO and HTTP
RDP Kerberos
88
88
RDP Kerberos
123
135
135
137
161
162
389
401
402
445
636
750
751
752
753
754
1010
1433
1500
1758
1759
2381
2500
4011
RDP SNMP
RDP AeXNS, DCOM and SQL
RDP AeXNS and DCOM
RDP Netlogon SMB and SQL
RDP SNMP
RDP SNMP
RDP LDAP ping
RDP WOL
RDP Dep Agents
RDP MS-DS
RDP SSL LDAP
RDP Windows® 2000 AD
RDP Windows® 2000 AD
RDP Windows® 2000 AD
RDP Windows® 2000 AD
RDP Windows® 2000 AD
RDP PXEConfig
RDP SQL
RDP RPC
RDP TFTP
RDP TFTP
RDP, RDP Web Agent
RDP RPC
RDP Ext DHCP PXE
Creating a custom Windows image 21
Download from Www.Somanuals.com. All Manuals Search And Download.
For more information about creating the Windows® XP image, see "Creating the Windows® XP image
Installing the applications
HP recommends that you install the following applications before installing user applications:
•
•
Microsoft® .NET Framework—This software is required by many Windows® applications.
Sun Java™ Virtual Machine (JVM) for Internet Explorer—This software is required to use iLO 2
Remote Console capabilities that depend on a JVM—enabled browser.
•
•
Adobe® Acrobat® Reader—This software is required to view .pdf files.
Altiris Aclient—This software is required to use HP Rapid Deployment Pack to image the workstation
blade.
Deploying the Windows image
1.
2.
3.
Run sysprepto generate new security IDs on each target system.
Capture the image.
Deploy the image to the workstation blades.
Creating a custom Windows image 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Windows® XP-64 on the workstation
blade
Windows® XP-64 on the workstation blade
While Windows® XP-64 is supported on the workstation blade, this OS is not available factory-installed.
Windows® XP-64 needs to be acquired, installed, and configured by your IT department. Because so
many of the Windows® XP-64 processes are similar to the processes for Windows® XP-32, this chapter
focuses on those processes that are different or unique for Windows® XP-64.
Windows® XP-64 processes
This section assumes you are familiar with the chapter "Creating a custom Windows® XP image." This
section describes the key differences in how Windows® XP-64 is deployed compared to Windows® XP.
The key aspects are:
•
•
Acquire the Windows® XP-64 installation media from Microsoft®.
For a list of hardware and software that is supported on Windows® XP-64, see the document
Hardware and Software Supported by HP ProLiant Workstation Blades, available at
•
The Windows® XP-64 software and drivers need to be downloaded from HP. When prompted to
select the operating system, select Microsoft® Windows® XP Professional x64 Edition. To extract the
files to create the diskette you will use during the XP-64 installation from the HP Package Setup
window, click Extract.
In some cases, the identical SoftPaqs are available on both the 32-bit and 64-bit download pages. For
example, for the Broadcom Multifunction Drivers, the 32-bit and 64-bit SoftPaqs are identical. In other
instances, such as the SATA/SAS Controller Driver, there are unique 32-bit and 64-bit SoftPaqs. This
information might enable some efficiencies in your management of SoftPaqs if you are supporting
workstation blades running both Windows® XP-32 and Windows® XP-64.
Using Windows® XP-64 on the workstation blade 23
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Version 2.2 of the HP SAM SoftPaq is required for Windows® XP-64. The previous SAM release,
version 2.1, is not supported on Windows® XP-64.
The BIOS version is not dependent on the operating system that you are using. A common BIOS
supports all three operating systems: Windows® XP-64 and Red Hat Enterprise Linux 4. HP
recommends updating your workstation blades to the latest BIOS version available.
•
QFEs are OS-specific. Install the Windows® XP-64 QFEs required by your IT department. 64-bit
QFEs are available on the HP download web page referenced above. Also, search
Using Windows® XP-64 on the workstation blade 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Windows Vista® on the workstation blade
Acquiring Windows Vista®
Windows Vista® recovery media is shipped with your workstation blade. If your Windows Vista®
recovery media is lost or damaged, you can order new recovery media.
The Windows Vista® recovery media does not contain the following four modules. You must download
and install these modules after Windows Vista® is installed:
•
•
•
•
HP Insight Management Agents
HP ProLiant iLO 2 Management Controller Driver
HP ProLiant Integrated Lights-Out Management Interface Driver
HP System Management Homepage
Installing Windows Vista®
This section describes how to install Windows Vista® using the Windows Vista® OS DVD and the
RestorePlus! DVD.
The installation process repartitions and reformats the workstation blade hard drive. Because all files are
deleted from the hard drive during this process, be sure to archive all important files before beginning the
installation.
There are two primary methods to install Windows Vista®:
•
Run the installation process using devices attached to the Local I/O Cable-A USB hub (with a
keyboard, mouse, and CD/DVD drive), and a monitor.
•
Run the installation process using iLO 2 virtual media from your local PC. Note that this method is
slower than the above method, and is susceptible to network issues.
In the description of the installation process in the next section, CD/DVD drive refers to either to a USB
CD/DVD drive connected to the Local I/O Cable or to a CD/DVD drive on your client PC connected to
the workstation blade through iLO 2 virtual media.
Windows Vista® installation steps
Perform the following steps to install Windows Vista® on the workstation blade:
1.
2.
Insert the Windows Vista® RestorePlus! DVD into the CD/DVD drive.
Boot the workstation blade from the DVD. When the GUI Language selection screen appears, select
a language (for the installation process, not for localization of the operating system), and then click
Next.
3.
4.
After selecting the GUI Language for the install process, a warning message appears, advising you
that all data will be erased from your primary hard disk drive. Click Begin.
Select the operating system language, and then click Next. A warning message appears.
Using Windows Vista® on the workstation blade 25
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
6.
Click Next.
Choose a partitioning scheme. The default partitioning scheme uses the entire disk drive for the C:
partition. To select a different partitioning scheme, use the blue arrows to make your selection, and
then click Next.
7.
8.
9.
After requesting confirmation of the hard drive erasure two more times, the restore process partitions
and formats the hard drive. Files are then copied from the RestorePlus! DVD to the hard drive.
You are prompted to insert the operating system DVD. Insert the Windows Vista® DVD, and click
Next.
Files are copied from the Windows Vista® DVD to the hard drive. When prompted, remove the
DVD.
10. When prompted for an optional Supplemental CD, click Skip to proceed without one. The
application CDs are not Supplemental CDs.
11. When prompted for a Special Content CD, click Skip if you do not have a Special Content CD.
12. When a message appears advising you that the CD-specific portion of the process is complete, click
Begin Setup. The remainder of the installation process runs entirely from the hard drive.
13. The restore process automatically begins installing software. When the Microsoft® OOBE screens
appear, answer the questions specific to your installation.
14. After entering the OOBE information, click OK to reboot the workstation blade into Windows
Vista®.
Viewing the Windows Vista® desktop
Because the RGS Sender is not currently supported on Windows Vista®, you can use the following
methods to view the Windows Vista® desktop. The first two methods provide remote viewing of the
Windows desktop, while the third method provides local viewing.
•
Operate the workstation blade with Remote Console Mode set to Admin Mode—In Admin Mode, the
Windows desktop is generated by the ATI video controller, which can be viewed remotely using the
iLO 2 Remote Console.
•
•
Microsoft® Remote Desktop Connection—Microsoft® Remote Desktop Connection can be used to
remotely view the Windows Vista® desktop.
Use expansion blade graphics—This method assumes that your workstation blade has an HP
Graphics Expansion Blade attached, and that you have an NVIDIA PCI Express graphics adapter
installed in the expansion blade. In this case, you can view the Windows Vista® desktop by
connecting a monitor to the DVI connector on the graphics adapter. Remote Console Mode should
be set to User Mode to ensure the Windows desktop is generated by the NVIDIA graphics adapter.
Using Windows Vista® on the workstation blade 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Capturing a workstation blade image using HP
Insight Rapid Deployment Software
Using HP Insight Rapid Deployment Software
HP Insight Rapid Deployment Software can be used to capture the OS image of the workstation blade for
both Windows®, both 32- and 64-bit. This chapter assumes you are familiar with Rapid Deployment
Software. For more information on HP Insight Rapid Deployment Software, see the HP website.
The following flowchart provides an overview of the process used to capture the OS image. The first
flowchart branch depends on whether you plan to use Altiris to run Sysprep, or if you plan to run Sysprep
manually.
Step 1: Configure the workstation blade (reference computer) from whose the image is captured.
Prepare the workstation blade whose image is to be captured:
a. Install, update, and configure the OS—Ensure that the OS is configured as desired, including
updates and patches.
b. Change Remote Console Mode—If you need to view the capture process using the iLO 2 Remote
Console or the Local I/O Connector of the workstation blade, Remote Console Mode must be set
information on setting Admin Mode or Setup Mode.
Rapid Deployment Software contains jobs that can be used to automatically set Remote Console
Mode to the desired state.
Letting Remote Console Mode to Admin Mode or Setup Mode is not required for capturing an
image. It enables you to view the capture process using iLO 2. If Remote Console Mode is in
User Mode, you cannot view the Windows® desktop until after the image is captured, and you
use RGS or Remote Desktop Connection to log into the workstation blade.
If you do set Remote Console Mode to Admin Mode or Setup Mode, you must change the mode
back to User Mode after the image is captured.
To capture an OS image and deploy it to multiple other computers, the Sysprep tool must be run
to set a new SID and to apply new system settings, such as the computer name. If you plan to use
Altiris Deployment Server to run Sysprep, continue with Step 2. If you plan to run Sysprep
manually, proceed to Step 5.
Step 2: If required, configure the Altiris Deployment Server to run Sysprep.
Depending on your Rapid Deployment Software configuration, this step may have already been
completed. To configure the Altiris Deployment Server to run Sysprep, refer to the Deployment Solution
Step 3: Configure the A-Client (Altiris Agent) so that it is installed on the workstation blade.
If you are using Altiris to run Sysprep, you must configure the A-client (Altiris Agent) so that it is installed
on the workstation blade by performing these steps:
Capturing a workstation blade image using HP Insight Rapid Deployment Software 27
Download from Www.Somanuals.com. All Manuals Search And Download.
a. On the Altiris Deployment Server, click Tools > Remote Agent Installer. The Remote Agent Installer
screen appears. Select Use this username and password for client/s. Using an Administrative
account local to target, Click Next.
b. Accept the default install directory path or choose your own, and then select Enable this agent to
use SIDgen and/or Microsoft Sysprep.
c. To configure optional settings on the A-client, click the Change Settings button, and then click
Next.
d. Click the dropdown arrow, and then select Use only Microsoft Sysprep utility. Locate the
DEPLOY.cab file you downloaded in Step 2, and in the XP/2003 box, using the browse button
next to Windows® XP/2003, click Next.
e. Select Add client(s) to default group, or select the group to add them to.
f. On the Selecting Clients screen, select or add the Names or IP address of the workstation blades
you want to install A-clients on by using the Add button. You can select multiple workstations at a
time. When finished adding workstations, select Finish. The progress and results of the Altiris
Agent installation appear.
Step 4: Create a job that captures the image using Altiris to run Sysprep.
Perform the following steps to create a new job that captures the OS image using Altiris to run Sysprep:
a. Under the jobs pane in the white area, right-click and select New Job. Enter a unique name for
the job. Double click the new job, click Add>>, and then select Create Disk Image.
b. On the Save Disk Image to a file screen next to the name field, click the browse button, locate
the images folder (<Express Share>\Images), and then enter a unique image name for your
image. Click Save.
c. Select Prepare using Sysprep, and then enter the Product key to be used. If you have a specific
pre-boot environment you want to run the image in, select it at the bottom of the screen. The
default is WinPE.
d. Accept the defaults on the Return Codes screen.
Continue to Step 7.
Step 5: Run Sysprep manually.
To run Sysprep manually, see the article "How to use the Sysprep tool to automate successful deployment
computer, and boot directly to PXE manually (F12 on POST) to run the image process without booting to
the OS first.
Step 6: Create an Altiris job to capture the image that does not use Altiris to run Sysprep.
To create an Altiris capture job that does not run Sysprep, perform the following steps:
a. Under the jobs pane in the white area, right-click and select New Job. Enter a unique name for
the job. Double click the new job, click Add>>, and then select Create Disk Image.
b. On the Save Disk Image to a file screen, next to the name field, click the browse button, locate
the images folder (<Express Share>\Images), and then enter a unique image name for your
image. Click Save.
c. Click the Advanced button next to the pre-boot select. In the middle of the screen, select Do not
boot to production. Altiris A-Client does not run the system image preparation procedure that
includes Sysprep. Use this selection:
Capturing a workstation blade image using HP Insight Rapid Deployment Software 28
Download from Www.Somanuals.com. All Manuals Search And Download.
— If you are running Sysprep manually
— If you are not using Sysprep at all and want to make a carbon image of you computer
d. Accept the defaults on the Return Codes screen.
Step 7: Apply the new Altiris job to computers whose images you are capturing.
o
o
You can drag and drop that job to computers in the HP RDP console.
Select the computer in the Computers pane of the Altiris Console. In the right pane, you can see
all running jobs and their status.
Capturing a workstation blade image using HP Insight Rapid Deployment Software 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Deploying a workstation blade image using HP
Insight Rapid Deployment Software
Using HP Insight Rapid Deployment Software for
Windows® XP-64
HP Insight Rapid Deployment Software can be used to deploy an operating system image to the
workstation blade for both Windows® XP-32 and Windows® XP-64. This chapter assumes you are
The following procedure provides an overview of the process used to deploy an OS image. The first
flowchart branch depends on whether you plan to use Altiris to run Sysprep, or if you plan to run Sysprep
manually. Following the flowchart, the details of each step are presented.
Step 1: If needed, change Remote Console Mode.
If you need to view the deployment process using the iLO 2 Remote Console or the Local I/O Connector
of the workstation blade, Remote Console Mode must be set to Admin Mode or Setup Mode. for
HP Rapid Deployment Software contains jobs that can be used to automatically set Remote Console Mode
to the desired state.
Setting Remote Console Mode to Admin Mode or Setup Mode is not required for deploying an image. It
enables you to view the deployment process using iLO 2. If Remote Console Mode is kept in User Mode,
you cannot view the Windows® desktop until after the image is deployed, and you use RGS or Remote
Desktop Connection to log into the workstation blade.
If you do set Remote Console Mode to Admin Mode or Setup Mode, you must change the mode back to
User Mode after the image is deployed.
Step 2: If required, configure the Deployment Server to run Sysprep.
Depending on your HP Rapid Deployment Software configuration, this step might need to be completed.
To configure the Altiris Deployment Server to run Sysprep, see the Deployment Solution documentation
Step 3: If needed, install A-Client (Altiris Agent) on the target computer (this agent will use Sysprep).
If the target computer currently has an OS installed, you can optionally install the Altiris A-client to
automate the system shutdown and PXE boot. If the target computer already has A-client installed, and is
seen by the Altiris deployment console, you do not need to perform this step. To install the Altiris A-client,
perform the following steps:
a. Click Tools>Remote Agent Installer. The Remote Agent Installer screen appears. Select Use this
username and password for client/s. Using an Administrative account local to target, click Next.
b. Accept the default install directory path or choose your own.
Deploying a workstation blade image using HP Insight Rapid Deployment Software 30
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Because you are using Altiris to run sysprep, select Enable this agent to use SIDgen and/or
Microsoft® Sysprep.
d. To configure option settings on the A-client, click the Change Settings button. Click Next.
e. Click the arrow, and then select Use only Microsoft Sysprep utility. Locate the DEPLOY.cab file
you downloaded in step 2, and in the XP/2003 box using the browse button next to Windows®
XP/2003, click Next.
f. Select Add client(s) to default group, or select the group you want them to be added to.
g. On the Selecting Clients screen, select or add the Names or IP address of the workstations you
want to install A-clients to. Use the Add button to select multiple at a time. When finished adding
systems, select Finish. The progress and results of the installation appear.
Step 4: Create a new job (that uses Altiris to run Sysprep) to deploy the OS image.
Perform the following steps to create a new job that deploys the OS using Altiris to run Sysprep:
a. Under the jobs pane, right-click in the white area and then select New Job. Enter a unique name
for the job. Double click the new job, click Add>>, and then select Distribute Disk Image.
b. Use the browse button next to the name field to locate the image file you want to use. This file
must be located on the Altiris express share or a location manually mapped for Altiris and pre-
boot environment to use.
c. Select Prepared Using Sysprep. Add the appropriate operating system and Key.
d. To specify the Sysprep answer file, select advanced. Select Use default answer file to use the
Altiris default file (this can be modified), or Use the following answer file to enter your own.
e. Select the appropriate boot environment, click Next, accept the defaults, and then click Finish.
Continue with Step 7.
Step 5: If needed, install A-Client (Altiris Agent) on the target computer (this agent will not use Sysprep).
If the target computer currently has an OS installed, you can optionally install the Altiris A-client to
automate the system shutdown and PXE boot. If the target computer already has A-client installed, and is
seen by the Altiris deployment console, you can omit this step. To install the Altiris A-client, perform the
following steps:
a. Click Tools>Remote Agent Installer. The Remote Agent Installer screen appears. Select Use this
username and password for client/s. Using an Administrative account local to target, click Next.
b. Accept the default install directory path, or choose your own.
c. To configure option settings on the A-client, click the Change Settings button. Click Next.
d. Select Add client(s) to default group, or select the group you want them to be added to.
e. On the Selecting Clients screen, select or add the Names or IP address of the workstations you
want to install A-client(s). Use the Add button to select multiple at a time. When finished adding
systems, select Finish. The progress and results of the installation appear.
STEP 6: Create a new job (that does not use Altiris to run Sysprep) to deploy the image
Perform the following steps to create a new job that deploys the OS, but does not use Altiris to run
Sysprep:
a. Under the jobs pane, right-click in the white area, and then select New Job. Enter a unique name
for the job. Double click the new job, click Add>>, and then select Distribute Disk Image.
b. On the first screen, use the browse button next to the name field to locate the image file you want
to use. This file must be located on the Altiris express share or a location manually mapped for
Altiris and pre-boot environment to use.
Deploying a workstation blade image using HP Insight Rapid Deployment Software 31
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Select the appropriate boot environment, click Next, accept the defaults, and then click Finish.
Step 7: Deploy the OS using the new Altiris job.
This step might require a manual PXE boot, depending on whether you have configured the Altiris A-client
to automate computer shutdown and PXE boot. To perform a manual PXE boot, press F12 key during
POST.
a. Drag and drop that job to computers in the HP RDP console.
b. By selecting the computer in the Computers pane of the Altiris Console in the right pane, you can
view the job and the status.
Deploying a workstation blade image using HP Insight Rapid Deployment Software 32
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing an unattended installation of
Windows® XP
Unattended installations
This chapter provides an overview of the steps to perform an unattended installation of Windows® XP.
This chapter describes the essential elements that are specific to workstation blades.
Unattended installation procedure
This section describes the steps to perform an unattended installation of Windows® XP and Windows®
XP-64.
1.
2.
Create and update the remote install distribution share.
In the distribution share, create a directory structure to store the OS installation files as well as the
HP-specific drivers and software for the workstation blade.
a. Windows® XP Pro SP2—The $OEM$ folder is created under the i386 directory, which was
originally created manually or via Remote Installation Service.
b. Windows® XP Pro x64—The AMD64 and i386 subdirectories contain the OS files, and the
$OEM$ folder needs to be on the same level as amd64 and i386
3.
4.
Download the software and drivers required for unattended installation
a. Uncompress the SoftPaq, and copy the folder and contents of the conrep and unsignok folders to
the $OEM$\$1\HP_Install directory.
b. Download the latest drivers and software for the workstation blade.
c. Copy RGS and additional utilities in various distribution sub-folders.
Create regeditcommand files in the $OEM$\$1\HP_Install directory to change registry settings
for RGS to work properly.
The following registry modifications are given as examples only. Editing the registry can cause
serious issues with Windows®. Although these examples have been shown to work, use these
examples at your own risk.
a. Turn off Fast User Switching—In this example, Fast User Switching is turned off by a script file
called "FastUserSwitching.reg", which contains the following lines:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon]
"AllowMultipleTSSessions"=dword:00000000
"LogonType"=dword:00000000
Where:
LogonType—Set to 0 to display the security dialog box, set to 1 to display the new Welcome
screen.
Performing an unattended installation of Windows® XP 33
Download from Www.Somanuals.com. All Manuals Search And Download.
AllowMultipleTSSessions—Set to 0 to disable fast user switching, set to 1 to allow
switching.
b. Turn off Simple File Sharing—In this example, Simple File Sharing is turned off by a script called
"Simple File Sharing.reg" with the following lines:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
"forceguest"=dword:00000000
Where:
forceguest-Set to 0 to disable and turn off simple file sharing, set to 1 to turn on simple file
sharing.
5.
Add workstation blade-specific entries to the different sections of the unattended answer file, either
unattend.txt or ristndrd.sif (for RIS installation). The following entries are based on the example
directories created in step 2, and must be adapted to your configuration if it differs from the
directories shown in step 2.
See Microsoft® documentation for additional details on the creation of the unattended.txt file.
a. Windows® XP Pro SP2
— Add to the [Unattended] section
Plug and Play driver location:
OemPNPDriversPath=\textmode;HP_Install\Drivers\chipset\intel;HP_Ins
tall\Drivers\graphics\ati;HP_Install\Drivers\Management\IMA;HP_Inst
all\Drivers\Management\ILO_MC;HP_Install\Drivers\Management\ILO_MI;
HP_Install\Drivers\network\Broadcom
Other settings:
OemPreinstall=Yes
DisableVirtualOemDevices=Yes
DriverSigningPolicy=Yes
— Add to the [MassStorageDrivers] section
[MassStorageDrivers]
"Windows 2000 Driver for Smart Array E200 and E200i
Controllers"=OEM
— Add to the [OEMBootFiles] section
[OEMBootFiles]
CISSm2.sys
HpCISSx2.inf
HpCISSm2.cat
txtsetup.oem
— Add to the [GuiUnattended] section
[GuiUnattended]
AutoLogonCount=2
— Add to the [NetOptionalComponents] section
[NetOptionalComponents]
SNMP = 1
The above entry installs SNMP during setup. This is required in order for the management
agents to install.
Performing an unattended installation of Windows® XP 34
Download from Www.Somanuals.com. All Manuals Search And Download.
— Add to the [GuiRunOnce] section
[GuiRunOnce]
"%systemdrive%\HP_Install\Driver_Software_Install2.cmd"
The above entry will run the install script "Driver_Software_Install.cmd" (see Appendices) that
will install drivers and software at first login after install.
— Add to the [WindowsFirewall] section
[WindowsFirewall]
Profiles = WindowsFirewall.TurnOffFirewall
[WindowsFirewall.TurnOffFirewall]
Mode = 0
In the above firewall example, the Windows® firewall is disabled see the Windows®
documentation on firewall settings). In practice, HP does not recommend disabling the
Windows® firewall unless another firewall is in use. See "Configuring the operating system
b. Windows® XP Pro x64
— Add to the [Unattended] section:
Plug and Play driver location:
OemPNPDriversPath="\\%SERVERNAME%\RemInst\%INSTALLPATH%\$OEM$\textm
ode;Drivers\HP_NULL_IPMI;Drivers\HP_SmartArray_E200i_SAS;Drivers\In
tel_chipset;Drivers\ "
For both Windows® XP-32 and Windows® XP-64, the path for the NVIDIA driver is
intentionally omitted. Because the workstation blade contains two video controllers, the
workstation makes the NVIDIA driver primary during the install, and if Remote Console Mode
is in Setup Mode, the screens go black. This change occurs because the iLO Remote Console
and Local I/O Connector displays are controlled by the ATI controller, and are deactivated if
NVIDIA is the primary controller. The NVIDIA driver is installed later in the installation
process and activated before switching to User Mode.
The ATI drivers that are downloadable from the workstation blade software and drivers web
page are not Microsoft® signed. If you do not to use the unsigned drivers, the default VGA
driver in the operating system is loaded. Remove the ATI lines in the driver path to prevent
the ATI driver from loading.
Other settings:
OemPreinstall=Yes
DisableVirtualOemDevices=Yes
DriverSigningPolicy=Yes
— Add to the [MassStorageDrivers] section:
[MassStorageDrivers]
"Windows Driver for Smart Array SAS/SATA Controllers"="OEM"
— Add to the [OEMBootFiles] sections:
[OEMBootFiles]
txtsetup.oem
hpcisss2.cat
hpcisss2.sys
hpcissx2.inf
Performing an unattended installation of Windows® XP 35
Download from Www.Somanuals.com. All Manuals Search And Download.
— Add to the [GuiUnattended] section:
[GuiUnattended]
AutoLogonCount=2
— Add to the [NetOptionalComponents] section:
[NetOptionalComponents]
SNMP = 1
This entry installs SNMP during setup. This entry must be made must be made, or the
management agents will not install correctly.
— Add to the [GuiRunOnce] section:
[GuiRunOnce]
"%systemdrive%\HP_Install\Driver_Software_Install2.cmd"
This entry runs the install script Driver_Software_Install.cmd, which will install drivers and
software at first login after install.
— Add to the [WindowsFirewall] section:
[WindowsFirewall]
Profiles = WindowsFirewall.TurnOffFirewall
[WindowsFirewall.TurnOffFirewall]
Mode = 0
In this example, the Windows® firewall is disabled (see Windows® documentation on
firewall settings). In practice, HP does not recommend disabling the Windows® firewall
recommended firewall settings.
— (Optional) [NetAdapters] sections—To ensure that the network card is enumerated correctly,
specifically state them in the unattended file. For example:
[NetAdapters]
Adapter01=Params.Adapter01
Adapter02=Params.Adapter02
[Params.Adapter01]
InfID="b06bdrv\l2nd&pci_164c14e4"
PciBusNumber = 3
PciDeviceNumber = 0
PciFunctionNumber = 0
ConnectionName = "HP NC373i Multifunction Gigabit Server Adapter
#1"
[Params.Adapter02]
InfID="b06bdrv\l2nd&pci_164c14e4"
PciBusNumber = 7
PciDeviceNumber = 0
PciFunctionNumber = 0
ConnectionName = "HP NC373i Multifunction Gigabit Server Adapter
#2"
6.
Using an RIS server—If you are using Microsoft® RIS, you must add network drivers to the i386
(Windows® XP Pro SP2) or AMD64 (Windows® XP Pro 64 SP2) subdirectories. See
Performing an unattended installation of Windows® XP 36
Download from Www.Somanuals.com. All Manuals Search And Download.
information.
Download the HP NC-Series Multifunction Drivers for RIS/WinPE. For example, for Windows® XP-
64, the b06nd.inf and b06nd51a.sys files are needed for RIS. Add the files and restart RIS.
7.
Connect the target workstation blade to the distribution share per your unattended remote installation
process, such as boot floppy, RIS, Rapid Deployment Software, or Altiris.
Example Windows® XP Pro GuiRunOnce script
The GuiRunOnce script installs the required software and drivers in the proper order, and runs after the
first boot. A sample version of this script is included in the "HP Workstation Blade Unattended install
support Files" downloaded in step 3. This script runs after first boot. Create the following script, name it
"Driver_Software_Install.cmd," and then copy it to $OEM$\$1\HP_Install directory (see [GuiRunOnce],
step 5e). Modify as needed.
rem @echo off
title HP Driver and Software Install Script
rem Starting - Change Registry Entree for RGS
regedt32.exe /s %systemdrive%\HP_Install\forceguest.reg
regedt32.exe /s %systemdrive%\HP_Install\FastUserSwitching.reg
rem Complete - Change Registry Entree for RGS
rem Starting XPUnsignOK2.exe to automatically push accept button for
Unsigned ATI driver
echo.
echo Starting XPUnsignOK2.exe
start
%systemdrive%\HP_Install\unsignok\XPUnsignOK2.exe
echo XPUnsignOK2.exe Started
rem Starting ATI driver install
echo.
echo Starting ATI driver install
cd %systemdrive%\HP_Install\Drivers\graphics\ATI
cpqsetup.exe /s
rem Completed ATI driver install
rem Starting NVIDIA driver install
echo.
echo Starting NVIDIA driver install
cd %systemdrive%\HP_Install\Drivers\graphics\nvidia
setup.exe -s -i
rem Completed NVIDIA driver install
echo Installing RGS
cd %systemdrive%\HP_Install\RGS\
setup.exe /s
/f1"%systemdrive%\HP_Install\RGS\ReceiverInstall.iss"
Performing an unattended installation of Windows® XP 37
Download from Www.Somanuals.com. All Manuals Search And Download.
echo Completed Installing RGS
rem Starting Management Agent install
echo.
echo Starting Management Agent install
cd %systemdrive%\HP_Install\Drivers\management\IMA
agents_32.msi /quiet
rem Completed Management Agent install
rem Starting Management Homepage install
echo.
echo Starting Management Homepage install
cd %systemdrive%\HP_Install\Drivers\management\SMH
sp36105.exe /s
rem Completed Management Homepage install
rem Changing to USER mode, next reboot)
rem Options on this command includes :
rem
rem
rem
-fsetup.dat : change system to setup mode
-fuser.dat : change to user mode
- fadmin.dat : change system to admin mode
echo.
echo Starting Management Homepage install
cd %systemdrive%\HP_Install\conrep
conrep.exe -l -fuser.dat -xconrep.xml
rem Completed Changing to USER mode, next reboot
echo.
echo HP Install Script Complete
echo.
echo Init Reboot
start shutdown -r -t 30
exit
Example Windows® XP Pro 64 GuiRunOnce script
rem @echo off
title HP Driver and Software Install Script
rem Starting XPUnsignOK2.exe to automatically push accept button for
Unsigned ATI driver
echo.
echo Starting XPUnsignOK2.exe
start %systemdrive%\HP_Install\unsignok\XPUnsignOK2.exe
echo XPUnsignOK2.exe Started
Performing an unattended installation of Windows® XP 38
Download from Www.Somanuals.com. All Manuals Search And Download.
rem Complete XPUnsignOK2.exe to automatically push accept button for
Unsigned ATI driver
rem Starting ATI driver install
echo.
echo Starting ATI driver install
cd %systemdrive%\Drivers\ATI
cpqsetup.exe /s
rem Completed ATI driver install
rem Starting NVIDIA driver install
echo.
echo Starting NVIDIA driver install
cd %systemdrive%\Drivers\NVIDIA
setup.exe -h"1024" -v"768" -b"24" -j"60" -s
rem Completed NVIDIA driver install
rem Starting Broadcom driver install
echo.
echo Starting Broadcom driver install
cd %systemdrive%\Drivers\Broadcom
cpqsetup.exe /s
rem Completed Broadcom driver install
rem Starting Management Agent install
echo.
echo Starting Management Agent install
cd %systemdrive%\Drivers\HP_Insight_Management_Agents
cpqsetup.exe /s
rem Completed Management Agent install
rem Starting HP Proliant iLO2 Management Controller install
echo.
echo HP Proliant iLO2 Management Controller install
cd %systemdrive%\Drivers\HP_iLO2_Management_Controller
cpqsetup.exe /s
rem Completed HP Proliant iLO2 Management Controller install
rem Starting HP Proliant iLO Management Interface install
echo.
echo Starting HP Proliant iLO Management Interface install
cd %systemdrive%\Drivers\HP_Proliant_iLO_Management_Interface
cpqsetup.exe /s
rem Completed HP Proliant iLO Management Interface install
rem Starting System Management Homepage install
Performing an unattended installation of Windows® XP 39
Download from Www.Somanuals.com. All Manuals Search And Download.
echo.
echo Starting Management Homepage install
cd %systemdrive%\Drivers\HP_System_Management_Homepage
cpqsetup.exe /s
rem Completed Management Homepage install
rem Starting firewall.cmd to punch holes in firewall (see Appendix C in this
whitepaper)
echo.
echo Starting firewall.cmd
start %systemdrive%\HP_Install\firewall\firewall.cmd
echo firewall.cmd Started
rem Complete firewall.cmd
rem Changing to USER mode, next reboot)
rem Options on this command includes :
rem
rem
rem
-fsetup.dat : change system to setup mode
-fuser.dat : change to user mode
- fadmin.dat : change system to admin mode
echo.
echo Starting Management Homepage install
cd %systemdrive%\HP_Install\conrep
conrep.exe -l -fuser.dat -xconrep.xml
rem Completed Changing to USER mode, next reboot
shutdown -r -t 300 -f
echo.
echo HP Install Script Complete
exit
Example firewall punch holes script (firewall.cmd)
netsh firewall add portopening TCP 2381 "HP SMH Secure Web Server (TCP
2381)"
netsh firewall add portopening TCP 5988 "WBEM/WMI Mapper (TCP 5988)"
netsh firewall add portopening TCP 5989 "WBEM/WMI Mapper Secure (TCP 5989)"
netsh firewall add portopening TCP 22 "SSH port (TCP 22)"
netsh firewall add portopening TCP 161 "SNMP port 161 (TCP 161)"
netsh firewall add portopening TCP 162 "SNMP port 162 (TCP 162)"
netsh firewall add portopening TCP 53 "DNS (TCP/UDP 53)"
netsh firewall add portopening TCP 67 "DHCP Request (TCP 67)"
netsh firewall add portopening TCP 68 "DHCP Reply (TCP 68)"
netsh firewall add portopening TCP 69 "M-TFTP (TCP 69)"
netsh firewall add portopening TCP 80 "HTTP + ILO (TCP 80)"
Performing an unattended installation of Windows® XP 40
Download from Www.Somanuals.com. All Manuals Search And Download.
netsh firewall add portopening TCP 126 "SNMP port 126 (TCP 126)"
netsh firewall add portopening TCP 137 "Netlogon SMB (TCP/UDP 137)"
netsh firewall add portopening TCP 401 "WOL (TCP 401)"
netsh firewall add portopening TCP 402 "RDP dep agents (TCP 402)"
netsh firewall add portopening TCP 636 "SSL LDAP (TCP 636)"
netsh firewall add portopening TCP 750 "Active Directory (TCP 750)"
netsh firewall add portopening TCP 751 "Active Directory (TCP 751)"
netsh firewall add portopening TCP 752 "Active Directory (TCP 752)"
netsh firewall add portopening TCP 753 "Active Directory (TCP 753)"
netsh firewall add portopening TCP 754 "Active Directory (TCP 754)"
netsh firewall add portopening TCP 1010 "PXEconfig (TCP 1010)"
netsh firewall add portopening TCP 1433 "SQL (TCP 1433)"
netsh firewall add portopening TCP 1500 "RPC (TCP 1500)"
netsh firewall add portopening TCP 1758 "TFTP (TCP 1758)"
netsh firewall add portopening TCP 1759 "TFTP (TCP 1759)"
netsh firewall add portopening TCP 2500 "RPC (TCP 2500)"
netsh firewall add portopening TCP 4011 "External DHCP PXE (TCP 4011)"
netsh firewall add portopening UDP 123 "SNTP (UDP 123)"
netsh firewall add portopening UDP 445 "SMB (UDP 445)"
netsh firewall add portopening TCP 53 "DNS (TCP 53)"
netsh firewall add portopening UDP 53 "DNS (UDP 53)"
netsh firewall add portopening TCP 135 "AeXNS+DCOM+SQL (TCP 135)"
netsh firewall add portopening UDP 135 "AeXNS+DCOM+SQL (UDP 135)"
netsh firewall add portopening TCP 88 "Kerberos (TCP 88)"
netsh firewall add portopening UDP 88 "Kerberos (UDP 88)"
netsh firewall add portopening TCP 389 "LDAP (TCP 389)"
netsh firewall add portopening UDP 389 "LDAP (UDP 389)"
netsh firewall set icmpsetting 8
Performing an unattended installation of Windows® XP 41
Download from Www.Somanuals.com. All Manuals Search And Download.
User information
User information introduction
This chapter is intended for the user of the HP Workstation Blade Solution and describes how to interact
with the workstation blade from the client computer. The following topics are included in this chapter:
•
•
•
•
•
•
•
•
•
•
•
•
•
Powering on the workstation blade client
Changing the behavior of RGS
Connecting from the client to the blade
Sending Ctrl+Alt+Del to the workstation blade
Accessing workstation blade desktop windows
Moving desktop windows between monitors
Spanning multiple displays with a desktop window
Maximizing a window to a single display
Supported USB devices
Synchronizing a PDA
Adjusting audio volume on the client and blade
Disconnecting the client from the workstation blades
Reconnecting to disconnected sessions
Powering on the HP workstation blade client
To power on the workstation blade client, press the power button on the blade front panel. The computer
cycles through a startup sequence in less than a minute and then displays either an Enterprise Directory
authentication window or the remote display control panel. If a Webmin administration screen appears,
your client has not been properly configured. Contact your administrator for assistance.
Changing the behavior of RGS
You might have to change the behavior of RGS. This is done using the RGS Receiver Control Panel, the
Remote Display Window Toolbar, or the Virtual KVM. The Receiver Control Panel enables you to change
all connections between a client and one or more blades. The Remote Display Window Toolbar controls
only a single connection. The Virtual KVM allows switching between connections in situations where you
have more display area on your blades than you have monitors on the client. For more information about
configuring RGS, see the HP Remote Graphics User's Guide.
The RGS Receiver must be in Setup Mode (where keyboard and mouse input are directed to the RGS
Receiver) to access the RGS controls. When the RGS Receiver is in Setup Mode, the display fades to gray
as a visual queue. Setup Mode is activated by entering certain key sequences while the RGS Receiver
User information 42
Download from Www.Somanuals.com. All Manuals Search And Download.
window is selected. By default, the key sequence to enter Setup Mode is press Shift, press Space, and
release Space (or, more simply, hold down the Shift key, then press and release the Space bar). When in
Setup Mode (while still holding the Shift key), you can:
•
•
•
Press the M key (Setup Mode + M) to display the Receiver Control Panel.
Press the H key (Setup Mode + H) to display the Remote Display Window Toolbar.
Press the Tab key to access the Virtual KVM.
If these key sequences do not work, contact your administrator.
Connecting from the client to the blade
RGS connects the client computer to the workstation blade. Under typical circumstances, connecting to
your blade from the client computer is as simple as clicking the Connect button, or entering an IP address
and clicking Connect. However, RGS is a highly configurable product, and your administrator can assign
workstation blades to the client in three ways:
•
•
•
Enterprise Directory
Local directory file
Manual entry
The following sections describe the default behavior of RGS during the login process, and outline which
behaviors can be modified by your administrator. Contact your administrator if you are unsure which of
the following modes is used in your client environment.
Using Enterprise Directory
This section assumes that your organization has implemented an Enterprise Directory Service and your
administrator has assigned a workstation blade to you through this service. If this is not the case, contact
your administrator for the hostnames or IP addresses of the blades assigned to you.
(Default) If you are using Enterprise Directory, after powering up the client system, an Enterprise Directory
authentication window appears. Enter your user name and password in the indicated boxes, and click
OK. In many environments, you must provide a Microsoft® Windows® domain for authentication. In this
case, enter domain\username in the User Name box. For example, a user named "mhsmith" in the
"Americas" domain will enter Americas\mhsmith in the User Name box. If you are unsure whether
domain authentication is used at your site, contact your administrator.
After you enter your login information, the Windows login screen (from the blade) appears on the client
display. You can interact with the Windows screen in much the same way as a PC or workstation.
(Variation) If there are different user names set up on your assigned blade, click the General tab on the
RGS control panel and then select Prompt for username and password. This will allow different user
names to be entered for each blade, and each connection will be authenticated separately.
(Variation) If your organization has implemented Single Sign-on with RGS, the only authentication prompt
(username and password) displayed is from the RGS Receiver on the client. After authentication by the
RGS Receiver, the blade Windows desktop is displayed, logged-in and ready to use.
User information 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a local directory file
Setting up the Enterprise Directory may not be practical for smaller installations. Instead, it may be more
efficient to use a directory file that resides on the client. The directory file contains a list of systems
assigned to authorized users on that client. For details on the content of the directory file, see the HP
Remote Graphics User's Guide.
(Default) You will be asked for your username and password twice for each blade-once from RGS to
authenticate the connection, and once by Windows® for login authentication. Enter your user name and
password in the indicated boxes and click OK. In many environments, you must provide a Windows
domain for RGS connection authentication. In this case, enter domain\username in the User name box.
For example, a user named "mhsmith" in the "Americas" domain will enter Americas\mhsmith in the User
name box. If you are unsure whether domain authentication is used at your site, contact your
administrator.
(Variation) If the administrator has enabled RGS Easy Login, you'll see only the standard Windows login
screen for each assigned blade. Log into Windows as you normally would.
If your organization has implemented Single Sign-on with RGS, the only authentication prompt (username
and password) displayed is from the RGS Receiver on the client, and it is displayed only once. After
authentication by the RGS Receiver, the blade Windows desktop is displayed, logged-in and ready to
use.
Using manual entry
If the Enterprise Directory or the local directory file is not used at your site, you will need to manually enter
the name or IP address of your assigned blade. A local administrator can provide this information. Only a
single blade can be accessed from each client using manual entry.
(Default) From the RGS control panel, enter the name or IP address of your assigned blade in the
Hostname box. Depending on how your local network is configured, the system name could be short (for
example, "willard") or long (for example, "willard.fc.hp.com"), or you might need to enter the IP address
of your assigned blade (for example, 10.10.24.145). Enter the name or address of the blade in the box
and click Connect. If the system is operational, you will see a connection authentication window with
"Authenticate to <system name>" in the title bar.
Enter your user name and password in the indicated boxes, and click OK. In many environments, you
must provide a Windows domain for authentication. In this case, enter domain\username in the User
name box. For example, a user named "mhsmith" in the "Americas" domain will enter Americas\mhsmith
in the User name box. If you are unsure whether domain authentication is used at your site, contact your
administrator.
After entering your login information, the Windows login screen (generated from the blade) appears on
the client display. You can interact with the Windows screen in much the same way as a traditional PC or
workstation.
(Variation) If the administrator has enabled Easy Login on the blade, there will be no RGS connection
authentication window. The Windows login or lock screen appears on the client. In this case, just log into
Windows as you normally would.
(Variation) If your organization has implemented Single Sign-on, the only authentication prompt
(username and password) displayed is from the RGS Receiver on the client. After authentication by the
RGS Receiver, the blade Windows desktop of the blade is displayed, logged-in and ready to use.
User information 44
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Ctrl+Alt+Delete to the workstation blade
Using Ctrl+Alt+Delete, you can log in, access the Windows® Task Manager, or lock the desktop. If you
are accessing a workstation blade from the following clients, the process is identical to a desk side
system-the Ctrl+Alt+Delete key sequence is forwarded directly to the blade:
•
•
•
HP Workstation Blade Client
HP dc72 Workstation Blade Client
HP dc73 Workstation Blade Client
If you are using a client running Microsoft® Windows®, Ctrl+Alt+Delete is intercepted by the Windows®
operating system. When this happens, the Microsoft® Windows® Security screen is generated by the
client computer, not by the workstation blade. If this occurs:
1.
2.
Click Cancel.
Open the RGS Remote Display Window Toolbar, select Changing the behavior of RGS, and then
click the Ctrl+Alt+Del button.
You can also use the alternate sequence, Ctrl+Alt+End, from a Microsoft® Windows® client. If this
sequence is disabled in RGS, enable it:
1.
2.
3.
4.
Open the RGS Control Panel (Setup Mode + M).
Click the Advanced button.
Click the Hotkeys tab.
Select Send CTRL-ALT-END key sequence as CTRL-ALT-DEL.
Accessing workstation blade desktop windows
If your client computer is configured with four monitors, you can have as many as four active desktop
windows from four workstation blades displayed simultaneously at full resolution on your client computer.
Assuming your client computer has been properly configured, the mouse pointer should move logically
from one monitor to the next as if the display area is one large monitor. To access the desktop of a
particular workstation blade, move the mouse pointer to that desktop area.
If the aggregate display area of your workstation blades exceeds the display area provided by the
monitors on your desk (such that one blade display covers another), you can use the RGS Virtual KVM to
bring forward the desktop window by choosing one of the following methods:
o
Method 1
a. Enter Setup Mode.
b. Press the Tab key. A window appears on the desktop showing a thumbnail view of each desktop.
c. Use the Tab key to highlight the desired desktop, and then release the Setup Mode key.
o
Method 2
a. Enter Setup Mode.
b. Press a number key corresponding to the desired blade.
User information 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving desktop windows between monitors
RGS enables you to move desktop windows to any part of the client screen space. If the desktop windows
sent from the workstation blade have borders, click the top border and drag the desktop to the desired
location. If the desktop windows do not have borders, perform the following steps to move a window:
1.
2.
Enter RGS Setup Mode.
While holding the system in Setup Mode (by default, continue to hold the Shift key down), click
anywhere on the desktop, and drag the window to the desired location.
3.
Release the mouse button and Shift key.
To simplify the alignment of desktop windows with monitors, the RGS Receiver has a "snap" feature that
performs the alignment automatically when a desktop window is positioned close to the edge of a
monitor. If the snap feature is not working, bring up the Receiver Control Panel and click the button.
Spanning multiple displays with a desktop window
The workstation blade NVIDIA graphics adapter supports a large display area (up to 4x2500x1600).
The client computer automatically adjusts its display area to accommodate the blade desktop window,
limited by the number and resolution of the monitors. For example, you might want a single workstation
blade desktop window to span two client monitors, each with a 1280x1024 resolution, placed side-by-
side. The process to size the blade desktop window is the same as changing the display resolution on a
traditional PC or workstation running Windows® XP:
1.
2.
3.
Right-click in an open space in the workstation blade desktop window, and then select Properties.
Click the Settings tab.
Under the Settings tab, adjust the screen resolution slider to 2560x1024, and then click OK.
The desktop window now spans two monitors. If the desktop window starts on the right-most monitor,
move the desktop window to the left-most monitor to view it in its entirety.
Maximizing a window to a single display
If the workstation blade desktop window is set to span multiple monitors, every window that you
maximize within the desktop window also spans multiple monitors. However, this behavior might not be
desirable. The graphics driver SoftPaq supplied by HP includes an NVIDIA tool, nView, that enables you
to change the setting so a maximized window fills only one monitor. To change the setting, perform the
following steps:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Change the resolution from 1600x1200 to 2560x1024.
Identify monitors (displays 1).
Go to the Desktop Management tab, select Disable, and then Enable.
Go to the Windows tab, and identify monitors (displays 1).
Save settings, and then exit nView.
Re-enter nView.
Go to the Windows tab, and identify monitors (displays 1).
Log out.
Log in.
User information 46
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Re-enter nView.
11. Go to Windows tab, identify monitors (should display 1a 1b).
Test the new setting by maximizing a window. If configured properly, the maximized window fills only
one monitor. The nView option supports other customizations in the Windows® environment as described
in the ForceWare Graphics Driver nView Desktop Manager User Guide included with the NVIDIA
graphics driver SoftPaq.
Supported USB devices
RGS supports remote USB, which allows USB devices connected to the client computer to be remotely
attached to the workstation blade. Remote USB is described in the HP RGS User Guide available at
also lists the client-attached USB devices which can be attached to the RGS Sender (the workstation
blade).
Synchronizing a PDA
The virtual USB port currently supports PDA synchronization operations. Before synchronizing a PDA, you
must first load your PDA synchronization software on one of your blades. Contact your administrator if the
software has not been loaded.
To synchronize your PDA:
1.
2.
3.
4.
Open the RGS Control Panel (Setup Mode + M).
Click the Advanced button.
Click the USB tab.
Select the Enable USB checkbox, and then select from the list the blade where the USB traffic will be
directed.
5.
6.
Attach the PDA cradle to one of the USB ports on the workstation blade client, then place the PDA in
the cradle.
Follow the PDA manufacturer instructions for synchronizing the PDA on a standard Microsoft®
Windows® XP desktop system.
Adjusting audio volume on the client and blade
The workstation blade solution provides three audio adjustments:
•
Adjust volume on a specific blade—Use Microsoft® Windows® Control Panel (click Start > Control
Panel > Sounds and Audio Devices). When you adjust the audio volume on a blade using
Windows® Control Panel, the Mute button in the Microsoft® Windows® XP volume control does not
function.
•
Adjust volume on multiple blades—Use the volume control and mute button on the RGS Control
Panel. Open the RGS Control Panel (Setup Mode + M). If you do not hear audio, click the Mute
button, and then move the volume slider (triangular wedge next to the mute button) to the right to
increase to volume. Adjusting the volume at the client affects all blades, and muting audio at the
client mutes all audio from the blades. This change is not shown on individual Microsoft®
Windows® XP desktops.
User information 47
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also use the RGS Control Panel to select between stereo and monaural audio, and choose
the sound quality level, from Low (AM radio) to High (full CD-quality). From the RGS Control Panel,
click the Advanced button, and then click the Audio tab.
Higher-quality and stereo sound increase network bandwidth usage.
•
Adjust volume on the client desktop only—Right-click the client desktop to access the Audio Control
Panel. This method is useful for adjusting the volume on your headphones and muting speakers
without changing blade volume levels. Select the output port (front jack, rear jack, or speaker) with
the left and right arrow keys, and adjust the volume with the up and down arrow keys. Use the M
key to mute a device.
If you mute the primary speaker on the workstation blade client and then adjust the volume from the
RGS Control Panel, the speaker might not be muted. For this reason, HP recommends that you
establish volume settings on the workstation blade client and RGS Control Panel, and then manage
the audio from the individual blades using standard Windows® tools.
Disconnecting the client from the workstation blades
To disconnect a client from all blades, open the RGS Control Panel (Setup Mode + M), and then click the
Disconnect button. To disconnect a client from an individual blade, open the Remote Display Window®
Toolbar (Setup Mode + H), and click the Disconnect button.
When you end a client RGS session, the workstation blade enters Disconnected mode. All workstation
blade processes continue to run, and the display state is maintained. Sessions are also disconnected
when you log out of Microsoft® Windows® on the workstation blade.
You can reboot the blade by clicking start>Shut Down. You can also reboot by pressing Ctrl+Alt+Del, and
then selecting Restart in the Task Manager.
During the reboot, the blade connection to the client is lost (there might be a small timeout lag). There is
no indication on the client when Windows® starts up on the blade and the blade is available for login.
HP recommends that you not turn off the blade from the Windows® XP desktop (for example, by selecting
Turn Off in the menu). Doing so would require administrator intervention to restart the machine.
HP recommends that you not select a power-saving state (such as Standby or Hibernate). Doing this would
require administrator intervention to bring the system back online.
Reconnecting to disconnected sessions
If network connectivity is lost for more than a few seconds, or power to the client is interrupted, it is likely
that the RGS connection from the client to one or more blade desktop sessions will be lost. RGS keeps the
Windows® XP sessions active on the workstation blades (assuming they are still running).
Upon resumption of the network connection, open the RGS Control Panel on the client (Setup Mode + M),
and click the Connect button. All blades that were disconnected are re-connected at the state they were in
when the connection was lost.
In case of a client power interruption, press the Power button when power is restored. Wait for the client
to boot, and then reconnect.
User information 48
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing the workstation blade
Workstation blade management overview
This chapter describes how to manage workstation blades, and includes information on the following
topics:
•
•
•
•
•
•
•
•
•
•
Onboard Administrator
Integrated Lights-Out 2 (iLO 2)
Remote Desktop Connection
System Management Homepage
HP SIM
HP Rapid Deployment Pack
HP Insight Diagnostics
ROM-based Setup Utility
BIOS programming
POST
The workstation blade design is based on the design of the corresponding server blade, and most of the
manageability features are common between workstation blades and server blades. The following
documents contain information about the manageability of the systems:
•
•
•
•
•
•
HP ProLiant BL460c Server Blade User Guide
HP BladeSystem c7000 Enclosure Setup and Installation Guide
HP BladeSystem c3000 Enclosure Setup and Installation Guide
HP BladeSystem c3000 Tower Enclosure Setup and Installation Guide
HP BladeSystem Onboard Administrator User Guide
HP Integrated Lights-Out 2 User Guide
Onboard Administrator
OA enables you to use a web browser to remotely log in to OA and obtain detailed information about
the contents of each c7000 Enclosure.
Using OA, you can determine the following:
•
•
•
•
A workstation blade is installed in each device bay.
Workstation blades are powered on as indicated by the green lights.
Four power supplies are installed in the enclosure.
Two network interconnect devices are installed in the rear of the enclosure.
Managing the workstation blade 49
Download from Www.Somanuals.com. All Manuals Search And Download.
•
One OA module is installed in the rear of the enclosure.
OA also provides detailed information about each blade in the enclosure.
The iLO 2 management processor also supports blade power management. However, using iLO 2 power
management requires a separate login to iLO 2 on each blade. With OA, you can manage power for
blades from a single OA login session.
OA modules in the rack are linked together with Ethernet cables, allowing administrators to view and
control the blades in every enclosure by logging into the OA module in any enclosure. OA also includes
the Insight Display, which enables administrators to locally view and control the blades.
Integrated Lights-Out 2 (iLO 2)
The iLO 2 feature enables administrators to remotely perform most workstation blade management
functions that otherwise would require a visit to the blades. For example, iLO 2 enables administrators to
remotely:
•
•
•
•
Change BIOS settings
View the boot process
Validate that Windows® starts up correctly (in Admin Mode and Setup Mode)
Install software
Many iLO 2 capabilities require that Remote Console Mode is set to Admin Mode. In Admin Mode, the
Windows® desktop is viewable using iLO 2. In User Mode, the Windows® desktop can only be viewed
using RGS or Remote Desktop Connection.
Accessing iLO 2
The most common way to access iLO 2 is from a web browser pointed to the iLO 2 IP address (using
HTTPS). After logging into iLO 2, the status summary screen is displayed.
iLO 2 Remote Console
The iLO 2 Remote Console enables you to remotely view and interact with the boot console and the
Windows® desktop (in Admin Mode and Setup Mode). To view the Remote Console types, select the
Remote Console tab.
The Remote Console capability of iLO 2 is not the same as the Remoter Console Mode BIOS setting.
The Integrated Remote Console displays the boot console. This enables you to remotely interact with the
boot process in the same manner as when a monitor, keyboard, and mouse are connected directly to the
blade.
Viewing the Windows® desktop
If Remote Console Mode is set to Admin Mode or Setup Mode, the Windows® desktop is generated by
the ATI video controller and is viewable through the iLO 2 Remote Console.
During normal use, Remote Console Mode is set to User Mode, which means that the Windows® desktop
is generated by the NVIDIA graphics adapter. In this case, the iLO 2 Remote Console (which is generated
by the ATI video controller) goes blank after Windows® starts up.
Managing the workstation blade 50
Download from Www.Somanuals.com. All Manuals Search And Download.
If you press Ctrl+Alt+Del on the keyboard of the PC that displays the iLO 2 Windows® desktop, your PC
will respond, not the blade. The iLO 2 Remote Console provides the Ctrl+Alt+Del button, which sends this
keystroke combination to the blade.
The Ctrl+Alt+Del button is located at the top of the Windows® desktop remote screen.
iLO 2 virtual media
The iLO 2 Virtual Media screen allows you to connect a floppy drive, USB key, or CD/DVD drive to the
workstation blade from your local PC. To create this connection, perform the following steps:
1.
2.
3.
Click the iLO 2 Virtual Devices tab.
Click the Virtual Media link.
Select the media on your PC to connect to the workstation blade, and then click the Connect button.
To verify that the virtual media is connected to the blade, you can use RGS to run Windows® Explorer on
the blade.
Local image files on the PC can also be connected to the workstation blade by selecting Local Image File
under Virtual Floppy/USB Key or Virtual CD/DVD-ROM, and providing the file name.
The Integrated Remote Console can also be used to mount local drives, folders or images from the PC to
the workstation blade.
Remote Desktop Connection
Microsoft® RDC provides a convenient way to remotely administer the workstation blade because it
allows the administrator to use the familiar Windows® interface.
RDC and RGS are not interoperable. If an RDC connection is made while an RGS session is established,
the blade RGS Sender disconnects and the RGS session terminates. After the RDC connection terminates,
the RGS Sender resumes automatically, and users can connect to the blade with RGS. For more
information, see the RGS User Guide.
Prior to RGS 5.1.3, RDC could not be used to remotely install RGS. For RGS 5.1.3 and later, RDC can be
used to install RGS.
In RDC connection is made using the following steps:
1.
To start Remote Desktop Connection, click Start > Accessories > Communications > Remote Desktop
Connection.
RDC displays a dialog box for entry of the workstation blade NIC1 or NIC2 IP address.
2.
Click Connect. The Remote Desktop window appears with the Log On to Microsoft® Windows®
screen. After logging in, the Windows® desktop appears.
System Management Homepage
This section describes how to view the blade SMH. SMH enables you to view information generated by
the four blade management agents: NIC, server, storage, and foundation. To access SMH, point your
browser to either of the blade IP addresses (NIC1 or NIC 2) using HTTPS and port number 2381.
If your credentials are correct, but you cannot log in to SMH, make the following change to the blade
security options:
Managing the workstation blade 51
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
2.
Go to Control panel > Administrative Tools > Local Security Policy > Security Options.
Ensure that Network Access: Sharing and security model for local accounts is set to Classic - local
users authenticate as themselves. This setting is also required for RGS operation, and might have
already been set.
After logging in, the Overall System Status page appears.
Local access to SMH
If you have a monitor, keyboard, and mouse connected to the Local I/O Cable, you can view SMH using:
•
•
The Start menu by clicking Start > All Programs > HP Management Agents > HP System Management
HP SIM
The workstation blade is designed to work with HP SIM. If you created a custom Windows® image,
ensure that SNMP and the HP Insight Management Agents for Windows are installed.
HP Rapid Deployment Software
HP Insight Rapid Deployment Software is a deployment solution that facilitates the installation,
configuration, and deployment of high volumes of workstation blades through either a GUI-based or web-
based console. Rapid Deployment Software is designed to automate repetitive tasks such as configuring
and deploying operating system images, configuring network switches, and configuring BIOS settings.
System configuration time is reduced, making it possible to rapidly scale workstation blade deployments
to high volumes.
This section focuses primarily on image capture and image deployment techniques using Rapid
Deployment Software for the workstation blade.
HP Insight Rapid Deployment Software content
Rapid Deployment Software is based on Altiris Deployment Solution (DS) technology. Functionality
specific to HP ProLiant Systems is added by the ProLiant Integration Module (PIM)-a collection of scripts
that have been predefined for ProLiant systems to perform routine tasks. Interaction with Altiris DS occurs
in a GUI or web-based environment called the Deployment Server Console. The DS Console provides a
drag-and-drop interface for assigning jobs to computers (drag computer to job or job to computer).
Toolbar buttons provide shortcuts to common Altiris DS tasks.
Infrastructure requirements
Rapid Deployment Software requires the following:
•
•
DHCP server
PXE server
Managing the workstation blade 52
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Altiris Deployment Solution
A database-either Microsoft® SQL Server or Microsoft® Data Engine (MSDE)
Rapid Deployment Software-specific differences between server
blades and workstation blades
There are several differences between server blades and workstation blades that affect HP RDP:
•
•
•
•
The operating systems are different.
The workstation blade operating system is preinstalled on the hard drive.
The workstation blade boots differently from the server blade.
The server blade supports several software tools not supported by the workstation blade.
These differences combine to limit some HP RDP functionality for the workstation blade, as described in
the following sections.
Operating system
Windows® XP-32 the workstation blade differs from Windows Server® on the server blade in several
ways that affect how an administrator uses HP RDP:
•
HP RDP versions prior to version 3.82 do not support scripted installs on Windows® XP—To deploy
Windows® XP-32 the workstation blade using HP RDP prior to version 3.82, the administrator must
create a reference image, outside of HP RDP, and then deploy that image to target systems using the
Image Capture and Image Deployment features of HP RDP. HP RDP 3.82 and higher support
scripted installs on Windows® XP-32.
•
Windows® XP uses Microsoft® Windows® Activation technologies—Microsoft® Windows®
Activation requires either that users activate their Windows® license on each machine at first boot or
that the administrator take specific steps during image creation to ensure that activation is not
needed. Microsoft® Windows® Activation is not required on the server blade.
Booting
The workstation blade boot process differs from the server blade boot process in two ways:
•
The workstation blade boots from the hard drive. Booting from the hard drive occurs because there is
an OS installed on the hard drive. With the server blade, PXE booting occurs because there is no
OS installed. If PXE booting is required on the workstation blade, the administrator will need must
use the iLO 2 remote console to force PXE booting to occur.
•
The workstation blade is shipped with Remote Console Mode set to User Mode. This is desirable for
most systems because RGS, using the NVIDIA graphics adapter, offers better performance than the
ATI video controller. However, because the RGS is not preinstalled on the operating system image,
the administrator might need to set Remote Console Mode to Admin Mode to create the reference
image.
Software tools
•
ProLiant Support Packs are not currently supported on the workstation blade.
Managing the workstation blade 53
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The SmartStart Scripting Toolkit is not supported on the workstation blade. In particular, the
Conrep.exe tool and server deployment jobs that capture firmware settings (for example, the default
Hardware Configuration or Server Deployment jobs) do not capture settings for features that are
unique to the workstation blade, such as Remote Console Mode. These settings must be configured
using iLO 2 or the local I/O cable.
Using Rip-n-Replace and Virtual Bay features to replace failed
systems
Both the Rip-n-Replace and the Virtual Bay functionality of the blade systems architectures should also
function on workstation blades. However, a new system placed into the Virtual Bay is not detected until it
is either PXE booted or booted with an image that has the A-client installed and configured. Automatic
deployment jobs are then enabled. The default for the workstation blade is to boot to the Windows® XP
Professional image preinstalled on the hard drive, which does not have the A-client installed or
configured.
HP Insight Diagnostics
The HP Insight Diagnostics utility enables you to perform and view critical computer hardware and
software configuration information from various sources. This utility enables you to run diagnostics and
view the hardware configuration of the system.
As noted below, the HP Insight Diagnostics are available on the Documentation and Diagnostics CD that
is included with your workstation blade. The server version of these diagnostics, available on the
SmartStart CD, is not supported on the workstation blade.
Key features and benefits
HP Insight Diagnostics simplifies the process of identifying, diagnosing, and isolating hardware issues. In
addition to robust management tools, service tools can be invaluable for quickly resolving system
problems. To streamline the service process and resolve problems quickly, you must have the right
information available at the time a service call is placed. The primary information requirement, which is
also the one that provides the greatest insight into potential system issues, is the system configuration.
Uses of Insight Diagnostics include:
•
•
Testing and diagnosing apparent hardware failures
Documenting system configurations for upgrade planning, standardization, inventory tracking,
disaster recovery, and maintenance
•
Sending configuration information to another location for in-depth analysis
Theory of operation
HP Insight Diagnostics Offline Edition operates in offline mode only-the operating system is not running,
and information from the operating system is not available to the diagnostics. Offline Survey is available
to display the current system configuration.
The Insight Diagnostics Test feature enables you to test functionality of all the major hardware components
in the system. This feature is flexible to enable you to customize test selections by providing different
Managing the workstation blade 54
Download from Www.Somanuals.com. All Manuals Search And Download.
modes and types of testing. It includes Quick, Complete, and Custom testing levels to give you control
over testing depth and required user interaction.
Accessing HP Insight Diagnostics
HP Insight Diagnostics is available on the Documentation and Diagnostic CD included with your
workstation blade. To start the diagnostic utility on the CD:
1.
Power on your workstation, and then press the F10 key during the initial boot process to enter the
Computer Setup utility.
2.
Select your language from the list, and then press the Enter key. In the Computer Setup Utilities
menu, four headings appear: File, Storage, Security and Advanced. Other headings might appear
depending on the workstation.
3.
4.
5.
Use the right arrow key to select Storage.
Use the down arrow key to select Boot Order, and then press Enter.
Select CD/DVD drive, and then enable it as a bootable device by pressing the F5 key. If not already
enabled, pressing the F5 key again disables the device. The default setting is enabled.
6.
Set the CD/DVD drive to the top of the boot order. Select CD/DVD, press the Enter key, and then use
the up arrow to move it to the top of the boot order.
7.
8.
9.
To apply and save changes, press the F10 key, and then select File>Save Changes and Exit.
Insert the Documentation and Diagnostic CD into the workstation.
Restart the blade. HP Insight Diagnostics launches.
Survey tab
The Survey tab displays system configuration information. In the View section on the left side of the
screen, you can select the Summary view to see limited configuration data or select the Advanced view to
see the data in the selected category. The following categories of information are available on the Survey
tab:
•
•
•
All—Provides a listing of all categories of information about the computer.
Overview—Provides a listing of general information about the computer.
Architecture—Displays the type of bus the computer uses and BIOS information. In addition, if the
bus is a PCI, information about the PCI configuration appears.
•
•
Asset Control—Displays asset tag, system serial number, and processor information.
Communication—Displays information about the computer parallel port (LPT) and serial port (COM)
settings, and USB and network controller information.
•
•
Graphics—Displays information about the graphics controller of the computer.
Input Devices—Displays information about the keyboard, mouse, and other input devices connected
to the computer.
•
•
Memory—Displays information about all memory in the computer. This includes memory slots on the
system board and any memory modules installed.
Miscellaneous—Displays information obtained from the computer configuration memory (CMOS),
system management BIOS data, system board data, and diagnostics component information.
Managing the workstation blade 55
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Storage—Displays information about storage media connected to the computer. This list includes all
fixed disks, diskette drives, and optical drives.
System—Displays information about the system board, processor, chassis, and BIOS, plus internal
speaker and PCI bus information.
Test tab
The Test tab enables you to choose various parts of the system to test. You can also choose the type of test
and testing mode. There are three types of tests to choose from:
•
Quick Test—Provides a predetermined script for which a sample of each hardware component is
tested. Quick Test requires no user intervention in either Unattended or Interactive mode.
•
Complete Test—Provides a predetermined script in which each hardware component is fully tested.
You can select Interactive or Unattended tests, which will change the devices tested during the
Complete Test. Most tests are available in Interactive mode but require user intervention.
•
Custom Test—Provides the most flexibility in controlling testing. Custom Test mode enables you to
specifically select which devices, tests, and test parameters are run. You can select tests that do not
require any user interaction using the Interactive or Unattended test modes. More tests are available
in Interactive mode but require user intervention.
To begin testing:
1.
2.
3.
Click the Test tab.
Select Type of Test to perform, and then select Interactive or Unattended as the test mode.
Determine how you want the test to be executed.
a. Select Number of Loops, and then enter the number of loops to perform.
b. Select Total Test Times, and then enter the amount of time in minutes that you want the diagnostic
test to run.
When choosing to run the test over a specified number of loops, enter the number of loops to
perform. If you want to run the diagnostic test for a specified time period, enter the amount of
time in minutes.
4.
Click Begin Testing in the lower right corner of the display to start the test.
While tests are being performed, you can monitor the progress by clicking the Status tab. Any errors that
are detected are summarized in the Error Log. Click Save to save the report to a diskette or a USB key
drive (if attached).
If the diagnostics utility detects an error during a test, you can mouse-over the failed text in the Status tab
to display additional information about the type of error and the error code.
To view all test failure information, select Error Log. To view the status of all testing that has been
performed, click the Log tab.
Status tab
The Status tab displays the status of selected tests. The type of test executed (Quick, Complete, or Custom)
also appears. The main progress bar displays the percent complete of the current set of tests. While
testing is in progress, a Cancel Testing button is available if you want to cancel the test.
After testing is complete, the Cancel Testing button is replaced with two buttons, Select New Tests and
Retest. To return to the previous test selection page to select a new set of tests, click the Select New Tests
Managing the workstation blade 56
Download from Www.Somanuals.com. All Manuals Search And Download.
button. To run the last set of tests executed without having to return to the test selection page, click the
Retest button.
The Status tab also displays:
•
•
•
•
•
Devices being tested
Tests that are running
Overall elapsed time
Individual elapsed test times
Condition status of each test
Log tab
The Log tab displays two types of logs:
•
Test Log—Displays all tests that have been executed, number of times the tests were executed,
number of times the tests failed, and the time it took to complete the tests. To clear the contents of the
Test Log, click the Clear Test Log button.
•
Error Log—Displays the tests that have failed during diagnostic testing. In addition to displaying the
devices and tests, this section can also include error details. The description section describes the
errors found by the diagnostic tests. To view a recommended action to resolve an error, click the
Recommended Repair button. The error count is the number of times the test has failed. To clear
contents of the Error Log, click the Clear Error Log button.
Help tab
The Help tab has three views:
•
•
•
HP Insight Diagnostics—Provides introductory and detailed information about Insight Filed
Diagnostics.
Error Codes—Provides error code listings, including device tested, messages, and recommended
repair information.
Test Components—Reloads and refreshes all components and displays component details after the
refresh.
The Help tab provides the following options:
•
Reload—Located in the upper-right corner of the display, this selection reloads all hardware
components.
•
•
About—Provides Insight Diagnostics revision details.
Exit—Located in the lower-left corner of the screen, this selection provides the option to exit
diagnostics.
Saving and printing information in HP Insight Diagnostics
You can save information displayed in the HP Insight Diagnostics Status and Log tabs to a diskette or USB
2.0 drive key (64MB or higher). You cannot save this information to the hard drive. The system
automatically creates an html file that looks the same as the information displayed on the screen.
1.
Insert a diskette or USB 2.0 drive key (capacity must be 64MB or higher). USB 1.0 drive keys are
not supported.
Managing the workstation blade 57
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
4.
Click Save in the upper right corner of the tab.
Select Save to the floppy or Save to USB key.
Enter a file name in the File Name box, and then click the Save button. An html file is saved on the
diskette or USB drive key.
5.
Print the information from the diskette or USB drive key.
To exit HP Insight Diagnostics, click Exit in the upper-right corner of the screen, and then remove the
Documentation and Diagnostics CD from the optical drive.
Downloading the latest version of HP Insight Diagnostics
1.
2.
3.
4.
5.
6.
7.
Click the Support & Drivers link.
Select the Download driver and software radio button.
Enter your product number (for example, WS460c) in the text box, and then press the Enter key.
Select your operating system.
Click the Diagnostic link.
Locate HP Insight Diagnostics, and then click Download.
The download includes instructions for creating a bootable CD.
ROM-Based Setup Utility
The RBSU enables BIOS parameters to be changed during the boot process. For example, Remote
Console Mode is set using RBSU. For details on RBSU options, see the HP ROM-Based Setup Utility User
You must make the following RBSU settings:
•
HP Graphics Expansion x16 mode--This mode is enabled only with a WS460c Graphics Expansion
Blade. This mode enables the PCIe Generation 2 x16 connections between the blade and the
graphics adapters. This mode is disabled for workstation blades without the Graphics Expansion
Blade.
To set HP Graphics Expansion x16 mode, select System Options>HP Graphics Expansion x16 mode.
o
o
If you are using the Graphics Expansion Blade, click Enable.
If you are not using the Graphics Expansion Blade, click Disable.
•
PCIe Generation 2—This setting is enabled only with a WS460c Graphics Expansion Blade. This
setting enables the Graphics Expansion Blade to work at a higher level than the PCIe Generation 1
setting.
To set PCIe Generation 2, select Power Management Options>Advanced Power Management
Options>PCI Express Generation 2.0 Support>Force PCIe Generation 2.
Power-on Self Test
At power-on, the workstation blade performs POST.
Managing the workstation blade 58
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Serial Console
BIOS Serial Console allows you to configure the serial port on the local I/O cable to view POST error
messages and run RBSU. A keyboard and mouse are not required.
BIOS programming
HP provides a downloadable SoftPaq to update the BIOS. Each BIOS SoftPaq includes a version number
and date. If there is a more recent BIOS version available than the BIOS on your workstation blade, HP
recommends that you update to the latest BIOS.
The BIOS version is not dependent on the operating system that you are using. A common BIOS can
support Windows® XP-32 and Windows® XP-64.
Managing the workstation blade 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Acronyms and abbreviations
BACS
Broadcom Advanced Control Suite
BBWC
battery-backed write cache
BIOS
Basic Input/Output System
DHCP
Dynamic Host Configuration Protocol
DIMM
dual inline memory module
DNS
domain name system
DVI
digital visual interface
FEC
Fast EtherChannel
GEC
Gigabit EtherChannel
HP SIM
HP Systems Insight Manager
HTTP
hypertext transfer protocol
HTTPS
hypertext transfer protocol secure sockets
Acronyms and abbreviations 60
Download from Www.Somanuals.com. All Manuals Search And Download.
I/O
input/output
iLO 2
Integrated Lights-Out 2
KVM
keyboard, video, and mouse
LACP
Link Aggregation Control Protocol
LAN
local-area network
NIC
network interface controller
OA
Onboard Administrator
OOBE
out of box experience
OS
operating system
PCI Express
Peripheral Component Interconnect Express
PDU
power distribution unit
POST
Power-On Self Test
PXE
Preboot Execution Environment
QFE
quick fix engineering
Acronyms and abbreviations 61
Download from Www.Somanuals.com. All Manuals Search And Download.
RBSU
ROM-Based Setup Utility
RDC
remote desktop connection
RGS
remote graphics software
RIS
reserve information sector
SAM
Session Allocation Manager
SAS
serial attached SCSI
SATA
serial ATA
SIM
Systems Insight Manager
SMASH
System Management Architecture for Server Hardware
SMB
Server Message Block
SMH
System Management Homepage
SNMP
Simple Network Management Protocol
SQL
structured query language
TFTP
Trivial File Transfer Protocol
Acronyms and abbreviations 62
Download from Www.Somanuals.com. All Manuals Search And Download.
UID
unit identification
USB
universal serial bus
VLAN
virtual local-area network
WOL
Wake-on LAN
Acronyms and abbreviations 63
Download from Www.Somanuals.com. All Manuals Search And Download.
|