QuickSpecs
Overview
HP ProLiant DL180 Generation 5 (G5)
Front View:
Rear View:
1. Access panel
2. Front LED Indicators
3. Power on/off
4. Optional DVD-RW or DVD-ROM drive
5. Front USB Ports (2)
6. Non-Hot plug Non redundant fans (4 fans)
7. Air Baffle
1.
2.
3.
4.
5.
6.
7.
8.
9.
Power Supply Cable Socket
T-15/T-10 Screwdriver
Thumbscrew For Top Cover
Low Profile Card Slot
PCI Expansion Card Slot
Thumbscrew For PCI Cage
HP LO100c Management Card Port (Optional)
LAN Port
8. PCI Cage
9. System Board
4 USB 2.0 Ports
10. UID LED Button
11. Serial Port
12. VGA Port
13. PS/2 Mouse Port (green)
14. PS/2 Keyboard Port (purple)
What's New
Support for Intel® Xeon® processors: L5420 and L5410
Support for SATA/SAS Hot Plug Enterprise(ENT)/Midline (MDL) Hard Drives
Support for Hot Plug Power Supplies
At A Glance
The HP ProLiant DL180 G5 is a low cost high capacity storage optimized 2-way server, that delivers on a history of design excellence
and 2U density for a variety of rack deployments and applications.
Processors:
Supports up to two Quad-Core Intel® Xeon® processors: 5400 sequence with 12MB Level 2 cache
Intel® 5100 Chipset
Memory:
Up to 16 GB of memory supported by six (6) PC2-5300 (667 MHz) DDR2 memory slots
Internal Drive Support:
Supports up to twelve via CTO with controller or up to eight via BTO:
Hot Plug Serial ATA (SATA) 3.5"hard drives; or
Hot Plug Serial Attached SCSI (SAS) 3.5"hard drives
Download from Www.Somanuals.com. All Manuals Search And Download.
DA - 12903
Worldwide — Version 10 — July 14, 2008
Page 1
QuickSpecs
Standard Features
HP ProLiant DL180 Generation 5 (G5)
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and
NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory
Integrated Models" section.
Processor
One of the following
depending on Model
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 80W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB)
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 65W, 1066MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Upgradeability
Chipset
Upgradeable to two processors
Intel® 5100 Chipset
Cache Memory
Memory Protection
Memory
12MB (2 x 6MB) Level 2 cache (5400 sequence)
Registered Advanced ECC memory
Type
PC2-5300 DIMMs (DDR2-667)
Standard
Maximum
1 GB
(1 x 1 GB)
16 GB
(2 x 4 GB) + (4 X 2 GB)
Two 4 GB DIMMs should be populated in
sockets 1 and 2 first (the right most sockets when
looking from the front of the chassis) - sockets 4
through 6 should be populated with 2 GB
DIMMs. (Refer to hood label for more
information)
Network Controller
One NC105i PCI-E Gigabit NIC (embedded) (Wake on LAN and PXE capable)
Download from Www.Somanuals.com. All Manuals Search And Download.
DA - 12903
Worldwide — Version 10 — July 14, 2008
Page 3
QuickSpecs
Standard Features
HP ProLiant DL180 Generation 5 (G5)
Expansion Slots
Slot Number Bus Speed Bus Number*
Device
Number**
Hot Plug
(Y/N)
PCI Voltage
3.3 volts
3.3 volts
3.3 volts
3.3 volts
3.3 volts
Notes
3
1
2
1
2
x8 PCI-
Express
3
5
1
0
0
1
2
N
N
N
N
N
Low Profile
x4 PCI-
Express
Full Length
Full Height
x4 PCI-
Express
6
Full length
Full Height
PCI-X***
Dynamic
Dynamic
Full Length
Full Height
PCI-X***
Full Length
Full Height
NOTE: All slots can accept universal keyed PCI cards
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID
by bus (starting with the lowest bus).
*** PCI-X bus speed will be 133MHz when only one PCI-X card is installed. It will be 100MHz when both
slots have PCI-X cards installed.
Storage Controller
4HDD Models
HP Embedded SATA RAID Controller (integrated into the south-bridge)
supporting SW RAID 0,1
NOTE: A diskette drive is needed to install storage controller drivers during a Windows operating system
installation from a CD.
NOTE: A diskette drive is needed to install storage controller drivers during a Windows operating system
installation from a CD.
Storage
Optical Drives:
DVD-ROM
8x IDE (ATAPI) DVD-ROM drive, slim (optional)
8x IDE (ATAPI) DVD-RW drive, slim (optional)
Via USB only
DVD RW
Diskette Drives
Drive Bays:
Hot Plug SAS/SATA
Up to 12 Hot Plug SAS/SATA 3.5" drives (4 drive bays standard)
NOTE: 4 Drive Models are Non-Hot Pluggable. Smart Array Controller must
be added for Hot Plug drive capability. 4 Drive Models can be upgraded
with the addition of a Smart Array Controller and a SAS/SATA Multi-lane
cable (464830-B21). 12 Drive Model available via CTO factory integration
ONLY.
NOTE: The addition of a Smart Array Controller requires the addition of a
SAS/SATA Multi-lane cable (464830-B21)
Maximum Internal
Storage
SATA Maximum Internal 12.0TB
SAS Maximum Internal 12.0TB
12 x 1TB
12 x 1TB
Download from Www.Somanuals.com. All Manuals Search And Download.
DA - 12903
Worldwide — Version 10 — July 14, 2008
Page 4
QuickSpecs
Standard Features
HP ProLiant DL180 Generation 5 (G5)
Interfaces
Parallel
None
Network RJ-45 (Ethernet) 1 10/100/1000 NIC port (plus 1 optional for the HP ProLiant Lights Out
100c Remote Management Card)
Serial
1
1
1
1
Pointing Device (Mouse)
Graphics
Keyboard
USB
7 total ports: (2) front, (4) rear, (1) internal
NOTE: Please see the following URL for additional information regarding
USB support:
Graphics
32MB shared supporting 1600 x 1200 x 16M resolution.
Rack (2U), (3.5 in/8.89 cm)
Form Factor
Remote Management
Lights-Out 100c
Lights Out LO100c is a family of Remote Management Card (RMC) for HP
ProLiant 100 series servers that do not have embedded LO100i. The
LO100c has all the features of the LO100i Advanced license and allows
customers, or their service providers, to remotely manage ProLiant servers
over a LAN or the Internet from anywhere, anytime regardless whether the
server is located in the same building, across town, or around the globe.
With LO100c, users can acquire complete remote control with Virtual KVM
(graphical hardware-based, remote console). Users can also access the
server's serial console, control system power, update system firmware and
software, as well as monitor system environmental conditions. The LO100c
remote management card can be accessed from a web browser or
command line interface. This virtual "at-the-server" functionality means
administrators stay in control of remote HP ProLiant 100 series servers.
The HP Lights-Out100c consists of a management processor and firmware
that provides cost-effective, entry-level lights-out functionality, basic system
board management functions, and diagnostics.
NOTE: For more information, please refer to the QuickSpecs for the
LO100c found at::
Download from Www.Somanuals.com. All Manuals Search And Download.
DA - 12903
Worldwide — Version 10 — July 14, 2008
Page 5
QuickSpecs
Standard Features
HP ProLiant DL180 Generation 5 (G5)
Server Management
Stand Alone Software
Product and ProLiant
Essentials
ProLiant Essentials Rapid Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a
Deployment Pack
complete deployment solution for HP ProLiant servers RDP provides a central
location to configure server hardware, deploy Windows, Linux and VMware
ESX operating environments and install using images and scripted profiles.
NOTE: Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to:
http://www.hp.com/servers/proliantessentials or the various ProLiant
Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please
Core Infrastructure
Management
Subscriber's Choice
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at:
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
ROMPaq, software and
latest drivers
The latest software, drivers, and firmware fully optimized and tested for your
ProLiant server and options, available through ProLiant Support Packs the
ProLiant Essentials Rapid Deployment Pack, SmartStart or downloaded from
Software and Drivers download pages website at:
Industry Standard
Compliance
ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0 Compliant
Manageability
The optional HP PL100 G5 Lights-Out 100c Kit ALL provides the following OS-independent remote
control capabilities with a riser card:
Virtual power
System event log access
System health
Remote Serial console (serial redirection)
Browser, Telnet access
SMASH-CLP compliant
IPMI 2.0 compliant
Virtual media (Floppy, CD, USB 2.0 (with release 3.0)
Secure Socket Layer Encryption
Secure Shell Encryption
Virtual KVM
Download from Www.Somanuals.com. All Manuals Search And Download.
DA - 12903
Worldwide — Version 10 — July 14, 2008
Page 6
QuickSpecs
Standard Features
HP ProLiant DL180 Generation 5 (G5)
Security
Power-on password
Setup password
Server Power Cords
One Highline IEC Power cord ships standard (for connection to a Power Distribution Unit)
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords that allow connection to
110V US wall outlets in a home or office. HP ProLiant DL servers are primarily connected to PDU's in
data center racks so they now ship standard with only a PDU power cord If a user wishes to power a
ProLiant DL server using a110V receptacle (NEMA-15), the NEMA power cord (AF556A) must be
ordered separately.
If a local power cord is required, please reference the following power cord matrix:
NOTE: Rack models ship standard with an IEC cable.
Localized cables included with geographic specific models in other world regions.
UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications
for UPS and PDU units:
Power Supply
750Watts - (Hot Plug, Autoswitching) Ships Standard
1200Watts - High Efficiency 12V Hot Plug AC Power Supply (Autoswitching) (Optional)
750Watts - Power Supply (Redundant Hot Plug, Autoswitching) (Optional)
1200Watts - High Efficiency Power Supply (Redundant Hot Plug, Autoswitching), CSCI 2007/2008
(Optional)
NOTE: Climate Savers Computing Initiative, 2007-2008 Compliant
NOTE: For additional information please see the Options section of this QuickSpecs.
System Fans
OS Support
4 system fans ship standard; Non-hot plug, Non-redundant
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Standard Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Enterprise Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Web Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Standard Edition (64-
bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Enterprise Edition (64-
bit)
Microsoft Windows Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
NOTE: For an up-to-date listing of the latest OS support matrix, please see:
NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select
Download from Www.Somanuals.com. All Manuals Search And Download.
DA - 12903
Worldwide — Version 10 — July 14, 2008
Page 7
QuickSpecs
Standard Features
HP ProLiant DL180 Generation 5 (G5)
Rack Airflow
Requirements
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830
square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a
minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
Rack Kit
HP ProLiant DL180 rack models have fixed rails which provide support for round or square mounting
holes, including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 26" -
36".
Telco and Threaded Hole Support for all 2-post Telco racks and threaded hole racks requires an additional option kit from Rack
Rack Support Solutions. The Rack Solutions brackets can be purchased at: http://www.racksolutions.com/hp.
Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP
for Servers and Storage servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
HP Enterprise
Configurator
The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs and expectations of our valued
customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or
an Authorized Partner for assistance.
Download from Www.Somanuals.com. All Manuals Search And Download.
DA - 12903
Worldwide — Version 10 — July 14, 2008
Page 8
QuickSpecs
Standard Features
HP ProLiant DL180 Generation 5 (G5)
Service and Support
HP services provide total care and support expertise with committed response designed to meet your IT
and business needs.
HP Care Pack services include coverage for the HP branded hardware options qualified for the server,
purchased at the same time or afterward, internal to the enclosure, as well as 22" and smaller external
monitors and tower UPS options up to 3kVA; these items will be covered at the same service level and
for the same coverage period as the server. Coverage of UPS Battery is not included, standard warranty
terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP
qualified rack options installed within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of multi vender support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support
offer to help you speedily deploy and maximize system uptime.
Recommended Service – Simplify ProLiant solution implementation, maintenance and management.
Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
Deployment Service – Hardware Installation only
Enhanced Service – Optimize service level to increase IT performance and availability
Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage
Deployment Service – Installation and Start-up only
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.
For a complete listing of service offerings and information visit:
Download from Www.Somanuals.com. All Manuals Search And Download.
DA - 12903
Worldwide — Version 10 — July 14, 2008
Page 9
QuickSpecs
Models
HP ProLiant DL180 Generation 5 (G5)
Four Drive Serial ATA (SATA) Models
NOTE: To upgrade from 4 Non-Hot Plug SATA hard drives to 4 Hot Plug SATA/SAS hard drives the addition of a storage controller
and one Internal SATA/SAS cable (464830-B21) are required. To upgrade to 8 Hot Plug SATA/SAS hard drives, the addition of a
storage controller and two Internal SATA/SAS cables (464830-B21) are required.
NOTE: To upgrade to server models supporting 12 hard drives; you must start with HP ProLiant DL180 CTO Chassis (P/N 457649-
B21). Please see the Configuration To Order section below.
HP DL180 G5, E5420
Processor
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80W, 1333 MHz
2.50GHz,(QC) 1GB (1P) One of the following
FSB)
456830-xx1
depending on model
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333 MHz
FSB)
HP DL180 G5, E5405
2.00 GHz,(QC) 1GB (1P)
456831-xx1
Cache Memory
Memory
12MB (2 x 6MB) Level 2 cache (5400 sequence)
1 GB (1 x 1 GB) PC2-5300 DIMMs (DDR2-667) with Advanced ECC
capabilities
Network Controller
Storage Controller
Hard Drive
One HP NC105i PCI-E (embedded)
Embedded SATA Raid Standard
None ship standard (up to 8 Hot Plug SATA or SAS drives supported
standard with the addition of a controller and cable. 12 drive models
supported via CTO only.)
Internal Storage
BTO internal storage capacity of up to:
8.0TB (8 x 1TB Hot Plug 3.5" SATA hard drives)
8.0TB (8 x 1TB Hot Plug 3.5" SAS hard drives)
Optical Drive
Form Factor
DVD-ROM, DVD RW (Optional)
Rack (2U)
NOTE: Server models supporting 4 hard drives are Non-Hot Pluggable.
Smart Array Controller must be added for Hot Plug drive capability.
NOTE: SAS (Serial Attach SCSI) capability requires the addition of a Smart
Array or HBA Controller card.
Country Code Key
xx = 00
xx = 20
xx = 29
xx = 37
xx = 42
xx = AA
U.S.
Brazil
Japan
APD
Europe
PRC
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 10
QuickSpecs
Configuration Information - Factory Integrated Models
HP ProLiant DL180 Generation 5 (G5)
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Hot Plug Models
HP ProLiant DL180 G5 Hot Plug SAS/SATA Rack CTO Chassis
Factory Integrated Model ships with:
457649-B21
One embedded NC105i PCI-E Gigabit Server Adapters (WOL & PXE-capable)
Three available PCI-Express slots:
Slot 1: x8 low-profile/half-height slot
Slot 2 & 3: x4 Full-Height/Full Length
NOTE: Optional PCI-X option kit includes: Slot 1 and 2: full-length/full-height PCI-X
100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in
the server.
One HP SATA Embedded Cable Kit
750 Watt Power Supply
One Highline IEC Power Cord
4 Non-Hot Plug Fans
Rack (2U), (3.5 in/8.89 cm)
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
Processors
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB)
NOTE: If 2 processors are desired, select one 487901-L21 and one 487901-B21.
487901-L21
491310-L21
466106-L21
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB)
NOTE: If 2 processors are desired, select one 491310-L21 and one 491310-B21.
Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 80W, 1333MHz FSB) Kit,
FIO
NOTE: If 2 processors are desired, select one 466106-L21 and one 466106-B21.
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB) Kit,
FIO
NOTE: If 2 processors are desired, select one 458784-L21 and one 458784-B21.
458784-L21
458785-L21
458786-L21
458787-L21
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80W, 1333MHz FSB) Kit,
FIO
NOTE: If 2 processors are desired, select one 458785-L21 and one 458785-B21.
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB) Kit,
FIO
NOTE: If 2 processors are desired, select one 458786-L21 and one 458786-B21.
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 65W, 1066MHz FSB) Kit, FIO
NOTE: If 2 processors are desired, select one 458787-L21 and one 458787-B21.
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 11
QuickSpecs
Configuration Information - Factory Integrated Models
HP ProLiant DL180 Generation 5 (G5)
Memory
1 GB PC2-5300 2 x 512 MB Single Rank Kit
1 GB REG PC2-5300 1 x 1 GB Kit
408850-B21
462483-B21
2 GB REG PC2-5300 2 x 1 GB Low Power Single Rank Kit
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
4 GB REG PC2-5300 2 x 2 GB Single Rank Kit
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit
483399-B21
408851-B21
461840-B21
408853-B21
408854-B21
483403-B21
8 GB REG PC2-5300 2 x 4 GB Low Power Dual Rank Kit
NOTE: Dual Rank DIMMs are only supported in slots 1 and 2. See the memory
population matrix in the Memory section of this QuickSpecs.
Hard Drive Cage
HP DL180 8HDD Cage FIO Kit
HP DL180 12HDD Cage FIO Kit
451368-B21
451369-B21
NOTE: The installation of a 12HDD Cage requires the addition of a 4-port SAS
controller that supports expanders. A Smart Array Controller, P400 or better, is
recommended.
NOTE: The addition of a Smart Array Controller (or 4-port SAS controller that
supports expanders) requires the addition a SAS/SATA Multi-lane cable (464830-
B21).
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory
integration. Please contact an HP sales representative for additional information.
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 12
QuickSpecs
Options
HP ProLiant DL180 Generation 5 (G5)
Unique Options
HP ProLiant DL180 PCI/X Riser Kit
NOTE: This option kit replaces the three internal expansion slots listed in step 1 base
451285-B21
configuration.
NOTE: Optional PCI-X option kit includes: Slot 1: full-length/full-height PCI-X 100;
Slot 2: Full length/Full-height PCI-X 100. PCI-X slots are 64 bits; 133 MHz capable if
only one PCI-X card is installed in the server.
Power Supplies
750W Redundant Power Supply Kit
451366-B21
437572-B21
High Efficiency HP 1200W 12V Hot Plug AC Power Supply
NOTE: Redundant Power Supply configuration for 1200W power supply requires both
power supplies to be 1200W. The 1200W and 750W power supplies cannot be
mixed.
Remote Management
Lights-Out 100c Remote Management Card
HP Lights Out 100c Remote Management Card 100c Kit
445513-B21
NOTE: For more information regarding Lights Out 100c Remote Management Card,
Server Management
Stand Alone Software
Products and ProLiant
Essentials
NOTE: Electronic licensing options are available for Insight Control suites and select
ProLiant Essentials software products. Please see the appropriate Insight Control and
ProLiant Essentials QuickSpecs for additional information.
Deploy
Rapid Deployment Pack
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License including 1
year of 24x7 Technical Support and Updates
452151-B21
NOTE: This license allows 1 server to be deployed and managed via RDP. Customer
will receive a printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain the
license activation key(s). Includes one year of 24 x 7 HP Software Technical Support
and Update Service.
NOTE: For additional ProLiant Essentials Rapid Deployment Pack License Kits please
see the QuickSpecs at:
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials
ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 13
QuickSpecs
Options
HP ProLiant DL180 Generation 5 (G5)
Processor
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB)
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB)
487901-B21
491310-B21
466106-B21
Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 80W, 1333MHz FSB)
Option Kit
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB)
Option Kit
458784-B21
458785-B21
458786-B21
458787-B21
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80W, 1333MHz FSB)
Option Kit
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB)
Option Kit
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 65W, 1066MHz FSB) Option
Kit
Memory
1 GB REG PC2-5300 2 x 512 MB Single Rank Kit
1 GB REG PC2-5300 1 x 1 GB Kit
408850-B21
462483-B21
483399-B21
408851-B21
408853-B21
461840-B21
408854-B21
483403-B21
2 GB REG PC2-5300 2 x 1 GB Low Power Single Rank Kit
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit
4 GB REG PC2-5300 2 x 2 GB LP Single Rank Kit
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit
8 GB REG PC2-5300 2 x 4 GB Low Power Dual Rank Kit
NOTE: Dual Rank DIMMs are only supported in slots 1 and 2. See the memory
population matrix in the Memory section of this QuickSpecs.
Hard Drives
SATA Hot Plug Midline (MDL) Drives
HP 1TB 3G SATA 7.2K 3.5" MDL HDD
HP 750GB 3G SATA 7.2K 3.5" MDL HDD
HP 500GB 3G SATA 7.2K 3.5" MDL HDD
HP 250GB 3G SATA 7.2K 3.5" MDL HDD
454146-B21
458930-B21
458928-B21
458926-B21
NOTE: Server BIOS update is required to support 3G SATA drives when configured
with embedded SATA controller.
SATA Entry (ETY) Drives 3.5", Hot Plug
HP 160GB 3G SATA 7.2K 3.5" ETY HDD
458945-B21
NOTE: Server BIOS update is required to support 3G SATA drives when configured
with embedded SATA controller.
NOTE: SATA drives have a 1 year warranty. Please see the SATA Hard Drive
QuickSpecs for Technical Specifications such as capacity, height, width, interface,
transfer rate, seek time, physical configuration, and operating temperature:
(Worldwide)
SAS Midline (MDL) Drives 3.5", Hot Plug
HP 1TB 7.2K 3.5" DP SAS MDL HDD
HP 750GB 7.2K 3.5" DP SAS MDL HDD
SAS Enterprise (ENT) Drives 3.5", Hot Plug
450GB 3G 15K 3.5" DP SAS ENT HDD
461137-B21
461135-B21
454232-B21
Page 14
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
QuickSpecs
Options
HP ProLiant DL180 Generation 5 (G5)
HP 300GB 3G SAS 15K 3.5" DP HDD
416127-B21
431944-B21
384854-B21
375872-B21
384852-B21
375870-B21
HP 300GB SAS 15K Hot Plug 3.5 SP HDD
HP 146GB 3G SAS 15K 3.5" DP HDD
HP 146GB SAS 15K Hot Plug 3.5" SP HDD
HP 72GB 3G SAS 15K 3.5" DP HDD
HP 72GB SAS 15K Hot Plug 3.5" SP HDD
NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications such as
capacity, height, width, interface, transfer rate, seek time, physical configuration, and
operating temperature:
(Worldwide)
NOTE: If selecting more than 4 hard drives or if using SAS hard drives a Smart Array
controller and two SAS/SATA cables (P/N 464830-B21) are required.
HP Slim SATA DVD-ROM
HP Slim SATA DVDRW
DVD-ROM Drive
481041-B21
481043-B21
449991-B21
449998-B21
Optical Drives
DVD-RW Drive
Storage Controllers
SAS Controllers
HP SC44Ge Host Bus Adapter
416096-B21
NOTE: Please see the HBA QuickSpecs for additional information:
(SC44Ge HBA)
SCSI HBA
HP SC11Xe Host Bus Adapter
412911-B21
464830-B21
NOTE: Please see the QuickSpecs for additional information:
(SCSI HBA)
Internal SAS/SATA Cable
NOTE: If selecting more than 4 hard drives or if using SAS hard drives a Smart Array
controller is required and two SAS/SATA cables.
NOTE: The addition of a Smart Array Controller requires the addition of a SAS/SATA
Multi-lane cable.
HP Smart Array E200 Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500 Controller
411508-B21
435129-B21
HP Smart Array E500/256MB Controller
NOTE: When ordering a Smart Array E500 Controller with BBWC the addition of the
HP SA-P400 and SA-E500 24" Battery Cable Kit (417836-B21) is required.
HP Smart Array P400 Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB Controller with BBWC
405132-B21
411064-B21
NOTE: When ordering a Smart Array P400 Controller with BBWC the addition of the
HP SA-P400 and SA-E500 24" Battery (417836-B21) is required.
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 15
QuickSpecs
Options
HP ProLiant DL180 Generation 5 (G5)
HP SA-P400 and SA-E500 24 In Battery Cable Kit
417836-B21
NOTE: This option kit contains a 24" battery cable and adhesive material for installing
a battery into the server if a Smart Array P400 or Smart Array E500 is integrated
outside of the factory. For all solutions, please refer to the server QuickSpecs and
User's Manual for detailed installation instructions.
HP Smart Array P800 Controller
HP Smart Array P800/512 BBWC Controller
512 MB Battery-backed write cache upgrade
Battery-backed write cache upgrade
381513-B21
405148-B21
383280-B21
NOTE: Please see the following Controller QuickSpecs for additional information:
(Smart Array E200 Controller)
(Smart Array E500 Controller)
(Smart Array P400 Controller)
(Smart Array P800 Controller)
Communications
HP NC110T PCI Express Gigabit Server Adapter
NOTE: Does not support Windows 2000.
434905-B21
HP NC360T PCI Express Dual Port Gigabit Server Adapter
412648-B21
435508-B21
HP NC364T PCI Express Quad Port Gigabit Server Adapter
NOTE: Does not support Windows 2000.
HP NC373F PCI Express Multifunction Gigabit Server Adapter
HP NC373T PCI Express Multifunction Gigabit Server Adapter
394793-B21
394791-B21
394795-B21
HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: Supported on a Full Length-Full Height slot only.
HP NC510C PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each
NC510C adapter.
414129-B21
414126-B21
HP NC510F PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each
NC510F adapter.
HPC Specific Options
Rack Kits
HP IB 4X DDR PCI-e Dual-port 0 memory HCA
HP Rack Cable Management Velcro Clips
483513-B21
379820-B21
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 16
QuickSpecs
Options
HP ProLiant DL180 Generation 5 (G5)
HP StorageWorks
Modular Smart Array 20
HP StorageWorks Modular Smart Array 20
NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity,
335921-B21
redundant power supplies.
NOTE: Please see the Modular Smart Array 20 QuickSpecs for additional information
including configuration steps and additional options needed for a complete solution
(Worldwide)
HP StorageWorks
Modular Smart Array 30
HP StorageWorks Modular Smart Array 30 SB
302969-B21
364430-B21
418408-B21
418800-B21
335880-B21
NOTE: Rack-mountable 14 drive enclosure with single bus, redundant power
supplies.
NOTE: Please see the Modular Smart Array 30 QuickSpecs for additional information
including configuration steps and additional options needed for a complete solution
(Worldwide)
HP StorageWorks
Modular Smart Array 50
HP StorageWorks Modular Smart Array 50 Enclosure
NOTE: Rack-mountable 10 SFF drive enclosure with single I/O module, redundant
hot plug power supplies and hot plug fans.
NOTE: Please see the Modular Smart Array 50 QuickSpecs for additional information
including configuration steps and additional options needed for a complete solution
(Worldwide)
HP StorageWorks
Modular Smart Array 60
HP StorageWorks 60 Modular Smart Array
NOTE: Rack-mountable 12-drive (3.5" 3G SAS/1.5G SATA) 2U enclosure with
3Gb/s SAS host connectivity and redundant power supplies.
NOTE: Please see the Modular Smart Array 60 QuickSpecs for additional information
including configuration steps and additional options needed for a complete solution
(Worldwide)
HP StorageWorks
Modular Smart Array 70
HP StorageWorks 70 Modular Smart Array
NOTE: Rack-mountable 25-drive (2.5" 3G SAS/1.5G SATA) 2U enclosure with
3Gb/s SAS host connectivity and redundant power supplies.
NOTE: Please see the Modular Smart Array 70 QuickSpecs for additional information
including configuration steps and additional options needed for a complete solution
(Worldwide)
HP StorageWorks
HP StorageWorks 500 Modular Smart Array
Modular Smart Array 500
NOTE: Please see the Modular Smart Array 500 QuickSpecs for additional
information including configuration steps and additional options needed for a
complete solution at:
(Worldwide)
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 17
QuickSpecs
Options
HP ProLiant DL180 Generation 5 (G5)
Tape Drives
NOTE: For the complete listing of Tape Drive offerings, please see:
USB Tape Drives
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive
AG703A
SAS Tape Drives
NOTE: For the DL180 G5, HP recommends purchasing the HP SC44Ge HBA
(416096-B21) for a dedicated SAS HBA for tape.
HP StorageWorks DAT 160 SAS Internal Tape Drive
NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount kit
(AE459A) for a complete rack-mount solution.
Q1587A
DW085A
EH847A
EH946A
HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive
NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount kit
(AE459A) for a complete rack-mount solution.
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive
NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount kit
(AE459A) for a complete rack-mount solution.
HP StorageWorks 1U SAS Rack-mount kit with one LTO-4 Ultrium 1760
NOTE: Please refer to the "Tape Drives, Tape Autoloaders & Tape Libraries" table in
the Storage section of this document for a list of SAS controllers with tape support.
Ultrium Tape Drives
SCSI Tape Drives
HP StorageWorks LTO-1 Ultrium 232 Internal Tape Drive (Carbonite)
NOTE: HP recommends combining this tape drive with the 1U SCSI Rack-Mount kit
(A7445B) for a complete rack-mount solution.
DW064A
DW028B
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-2 Ultrium 448 SCSI Tape
Drive (Carbonite)
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-3 Ultrium 920
HP StorageWorks 3U SCSI Rack-mount kit with one LTO-3 Ultrium 960 (Carbonite)
HP StorageWorks 3U SCSI Rack-Mount with 1 LTO-4 Ultrium 1840 Tape Drive
EH903A
Q1595B
EH926A
NOTE: Please see the HP StorageWorks LTO Ultrium Tape Drive QuickSpecs for
additional options such as controllers, media, and other related items:
(Worldwide)
(Worldwide)
For an up-to-date listing of the latest O/S and software support details for HP Ultrium
Rack-Mount Tape Drive Enclosures
HP StorageWorks 1U SCSI Rack-Mount kit
A7445B
A8007A
NOTE: The 1U Rack-Mount Kit can support up to (2) half-height tape drives and is
compatible with multiple Single-Ended and LVD SCSI tape drives including the DAT
40, DAT 72, DAT 160, DLT VS160, LTO-1 Ultrium 232, LTO-2 Ultrium 448, LTO-3
Ultrium 920 and LTO-4 Ultrium 1760 tape drives.
HP StorageWorks 1U USB Rack-Mount Kit
NOTE: The 1U USB Rack-Mount Kit can support up to (2) half-height tape drives and
is compatible with the DAT 40 USB, DAT 72 USB and DAT 160 tape drives.
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 18
QuickSpecs
Options
HP ProLiant DL180 Generation 5 (G5)
HP StorageWorks 1U SAS Rack-Mount Kit
AE459A
NOTE: The 1U SAS Rack-Mount Kit can support up to (2) half-height tape drives and
is compatible with the LTO-2 Ultrium 448 SAS and LTO-3 Ultrium 920 SAS and LTO-
4 Ultrium 1760 SAS tape drives.
HP StorageWorks 3U SCSI Rack-mount kit
274338-B22
AG576A
NOTE: The 3U SCSI Rack-mount Kit can support up to (2) full-height or (4) half-
height tape drives and is compatible with multiple LVD SCSI tape drives including DAT
40, DAT 72, DLT VS160, SDLT 600, LTO-1 Ultrium 232, LTO-2 Ultrium 460, LTO-2
Ultrium 448, LTO-3 Ultrium 920, LTO-3 Ultrium 960, LTO-4 Ultrium 1760 and LTO-
4 Ultrium 1840 tape drives.
HP StorageWorks 3U SAS Rack-mount Kit
NOTE: The 3U Rack-mount Kit can support up to (2) full-height or (4) half-height tape
drives and compatible with multiple SAS tape drives including DAT 160 SAS, LTO-2
Ultrium 448 SAS, LTO-3 Ultrium 920 SAS, LTO-4 Ultrium 1760 SAS and LTO-4
Ultrium 1840 SAS tape drives.
NOTE: Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional
information regarding these kits:
(Worldwide)
Disk-Based Backup
RDX Removable Disk Backup
HP StorageWorks RDX160 External Removable Disk Backup System
NOTE: 160GB of Disk Storage.
AJ766A
AJ768A
HP StorageWorks RDX320 External Removable Disk Backup System
NOTE: 320GB of Disk Storage.
NOTE: Please see the HP RDX Removable Disk Backup System QuickSpecs for
additional information:
HP D2D Backup System
HP StorageWorks D2D120 Backup System
NOTE: 2TB of Disk Storage.
EH884A
EH924A
EH950A
EH951A
EH952A
EH945A
EH938A
HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit
NOTE: 2TB of Disk Storage.
HP StorageWorks D2D130 Backup System
NOTE: 3TB of Disk Storage.
HP StorageWorks D2D130 Backup System with Data Protector Express Software Kit
NOTE: 3TB of Disk Storage.
HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage.
HP StorageWorks D2D2503i Backup System
NOTE: 3TB of Disk Storage.
HP StorageWorks D2D4004i Backup System
NOTE: 4.5TB of Disk Storage.
NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 19
QuickSpecs
Options
HP ProLiant DL180 Generation 5 (G5)
Tape Autoloaders
HP StorageWorks DAT Autoloader
HP StorageWorks DAT 72x10 tape autoloader
HP StorageWorks 1/8 Tape Autoloader
AE313B
HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader
HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SCSI Tape Autoloader
HP StorageWorks 1/8 LTO-3 Ultrium 920 G2 Tape Autoloader
HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Autoloader
HP StorageWorks 1/8 LTO-2 Ultrium 448 G2 Tape Autoloader
HP StorageWorks 1/8 LTO-1 Ultrium 232 G2 Tape Autoloader
AK377A
AJ816A
AH165A
AH558A
AH164A
AH163A
AH166A
HP StorageWorks 1/8 G2 Tape Autoloader Rack Kit
NOTE: Required to install the 1/8 G2 Autoloaders in a standard 19-inch rack;
includes rails and rackmount instructions
NOTE: Please reference the Tape Autoloader QuickSpecs at:
http://www.hp.com/go/automation for additional information needed to create a
complete solution; reference current compatibility information at:
Tape Libraries
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 4GB FC Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SAS Drive Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 4GB FC Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SAS Drive Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-2 Ultrium 448 SCSI Drive Library
HP StorageWorks MSL4048 Tape Library
AJ033A
AJ034A
AK378A
AJ817A
AG115A
AG326B
AH559A
AH169A
AG116A
HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 4GB FC Library
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SAS Drive Library
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 4GB FC Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SAS Drive Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-2 Ultrium 448 SCSI Drive Library
AJ035A
AJ036A
AK380A
AJ818A
AG322A
AG324B
AH560A
AH171A
AG320A
NOTE: Please reference the MSL Tape Library QuickSpecs at:
http://www.hp.com/go/automation for additional information needed to create a
complete solution; reference current compatibility information at:
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 20
QuickSpecs
Options
HP ProLiant DL180 Generation 5 (G5)
StorageWorks Options
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and
Linux. For detailed compatibility information please see:
HP StorageWorks 4 Gb PCI-X 2.0-to-Fibre Channel HBA
HP StorageWorks 4 Gb PCI-X 2.0 DC-to-Fibre Channel HBA
HP StorageWorks FC2142SR 4Gb PCI-E HBA
AB429A
AE369A
A8002A
A8003A
AE311A
AE312A
AD167A
AD168A
HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-E HBA
HP StorageWorks FC1142SR 4Gb PCI-E HBA
HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-E HBA
HP StorageWorks FC2143 4Gb PCI-X 2.0 HBA
HP StorageWorks FC2243 4Gb PCI-X 2.0 DC HBA
USB Options
USB 1.44-MB External Diskette Drive
HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)
HP Keyboard (USB) standard 2004
HP 1GB USB 2.0 Floppy Drive Key
HP 256MB USB 2.0 Floppy Drive Key
HP USB Internal Cable Kit
DC141B
DC172B
DT528A#ABA
442085-B21
442084-B21
451363-B21
HP KVM Switch Options 2x1x16 IP Console Switch with Virtual Media
4x1x16 IP Console Switch with Virtual Media
AF601A
AF602A
AF600A
AF604A
2x16 Server Console Switch with Virtual Media
PS/2 Virtual Media Interface Adapter, 1 pack
NOTE: Requires PS/2 and one USB port on server.
HP Server Console Switch (KVM), 0 x 1 x 8 port
HP Server Console Switch (KVM), 0 x 2 x 16 port
PS/2 Interface Adapter, 1 pack
336044-B21
336045-B21
262588-B21
262587-B21
AF611A
PS/2 Interface Adapter, 8 pack
HP 1x4 Console Switch
HP PS2 Server Console Cable, 6 foot, 2-Pack
AF612A
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE: required for supporting USB peripherals.
AF613A
NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches.
HP Serial Console Server HP 16 Port Serial Console Server (worldwide)
AF101A
AF102A
AF103A
AF110A
Options
HP 48 Port Serial Console Server (worldwide)
Serial Adapter, RJ45-D89 DCE Female, 1-pack
Serial Adapter, RJ45-D89 DCE Female, 8-pack
NOTE: For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 21
QuickSpecs
Options
HP ProLiant DL180 Generation 5 (G5)
Service and Support
Offerings (HP Care Pack
Services)
Hardware Services 4-Hour On-site Service
13-Hour x 5-Day Coverage, 3 Years, Electronic
24-Hour x 7-Day Coverage, 3 Years, Electronic
Hardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
UH271E
UH272E
UH270E
Hardware Services 6-Hour Call to Repair On-Site Service
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
UH273E
UH301E
Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 22
QuickSpecs
Memory
HP ProLiant DL180 Generation 5 (G5)
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
HP ProLiant DL180 G5 (all models)
Standard Memory
1 GB (1 x 1 GB) PC2-5300 Registered DIMM memory, with Advanced ECC Capabilities Memory installed.
Maximum Memory
Up to 16 GB memory is available with the optional installation of PC2-5300 Registered DIMM memory kits.
NOTE: Memory should be installed in pairs and matched for optimum performance.
NOTE: Chart does not represent all possible memory configurations.
NOTE: Only 1 dual rank 8GB kit can be populated.
Memory
Slot
1*
2*
3
4
5
6
Standard (1 GB)
1 GB
4 GB
Empty
4 GB
Empty
2 GB
Empty
2 GB
Empty
2 GB
Empty
2 GB
Maximum (16 GB)
* Indicates the right most DIMM slots when looking from the front.
Following are memory options available from HP:
1 GB REG PC2-5300 2 x 512 MB Single Rank Kit
1 GB REG PC2-5300 1 x 1 GB Kit
408850-B21
462483-B21
483399-B21
408851-B21
408853-B21
461840-B21
408854-B21
483403-B21
2 GB REG PC2-5300 2 x 1 GB Low Power Single Rank Kit
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit
4 GB REG PC2-5300 2 x2 GB Kit, Low Power, Single Rank Kit
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit
8 GB REG PC2-5300 2 x 4 GB Low Power Dual Rank Kit
NOTE: Dual Rank DIMMs are only supported in slots 1 and 2.
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 23
QuickSpecs
Storage
HP ProLiant DL180 Generation 5 (G5)
1-8 Eight 3.5" Hot Plug SAS/SATA Hard Drive Bays
9 DVD-ROM, DVD RW
Drive Support
Removable Media
Quantity
Position
Supported
Supported
Controller
DVD-ROM
DVD RW
Up to 1
Up to 1
9
9
Integrated IDE (ATAPI) (optional)
Integrated IDE (ATAPI) (optional)
Hard Drives
SATA Hot Plug Midline (MDL) Drives
Quantity
Position
Supported
Supported
Controller
1TB 3G 7.2K
Up to 8
1-8
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array E500/256MB Controller
HP Smart Array P800/512 BBWC Controller
HP SC44Ge Host Bus Adapter
750GB 3G 7.2K
500GB 3G 7.2K
250GB 3G 7.2K
HP SC11Xe Host Bus Adapter
SATA Hot Plug Enterprise (ENT) Drives
Quantity
Position
Supported
Supported
Controller
160GB 3G 7.2K
Up to 8
1-8
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array E500/256MB Controller
HP Smart Array P800/512 BBWC Controller
HP SC44Ge Host Bus Adapter
HP SC11Xe Host Bus Adapter
SAS Hot Plug Midline (MDL) Drives
Quantity
Position
Supported
Supported
Controller
1TB 3G 7.2K
750GB 3G 7.2K
Up to 8
1-8
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array E500/256MB Controller
HP Smart Array P800/512 BBWC Controller
HP SC44Ge Host Bus Adapter
HP SC11Xe Host Bus Adapter
SAS Hot Plug Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 24
QuickSpecs
Storage
HP ProLiant DL180 Generation 5 (G5)
450GB 3G 7.2K
300GB 3G 7.2K
146GB 3G 7.2K
72GB 3G 7.2K
Up to 8
1-8
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array E500/256MB Controller
HP Smart Array P800/512 BBWC Controller
HP SC44Ge Host Bus Adapter
HP SC11Xe Host Bus Adapter
External Storage
Quantity
Position
Supported
Supported
Controller
HP Storageworks MSA20
Enclosure
Up to 2 per SA
6402
External
Smart Array 6402 Controller
Smart Array 6404 Controller
Up to 4 per SA
6404
HP Storageworks MSA30
D-B Enclosure
Up to 2 per SA
6402
External
Smart Array 6402 Controller
Smart Array 6404 Controller
Up to 4 per SA
6404
HP Storageworks MSA50
Enclosure
Up to 2
External
External
External
HP Smart Array E500/256MB Controller
HP Smart Array P800 Controller
HP Smart Array P600 Controller
HP Storageworks MSA60
Enclosure
Up to 8 per SA
P800
HP Smart Array E500/256MB Controller
HP Smart Array P800 Controller
HP Smart Array P600 Controller
HP Storageworks MSA70
Enclosure
Up to 4 per SA
P800
HP Smart Array E500/256MB Controller
HP Smart Array P800 Controller
HP Smart Array P600 Controller
Tape and Disk-Based Backup
NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following:
NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders & Tape Libraries listed below,
please see the following:
NOTE: For complete listing of tape drive offerings see:
NOTE: SAS Tape Drives: Connecting hard drive cage and SAS tape to the same SAS Controller using split cable (supplied with tape
drive) deactivates 1 of the hard drive bays. Actual hard drive bay deactivated depends on where split cable plugs into SAS drive
connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the hard drive cage would
mean drive bay 8 is deactivated.
Position
Supported
Controller
Controller Part
Number
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 25
QuickSpecs
Storage
HP ProLiant DL180 Generation 5 (G5)
HP StorageWorks SCSI
Tape Drives, External
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-2 Ultrium 460
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
External
HP SC11Xe Host Bus Adapter
412911-B21
DAT 72
DAT 160
DLT VS160
SDLT 600
1U Rack-Mount Kit
3U Rack-Mount Kit
HP StorageWorks USB
Tape Drives, External
DAT 40 USB
DAT 72 USB
DAT 160 USB
External
External
USB 2.0 Port
N/A
1U USB Rack-Mount Kit
HP StorageWorks SAS
Tape Drives, External
DAT 160 SAS
HP SC44Ge Host Bus Adapter
416096-B21
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
LT0-4 Ultrium 1760 SAS
LTO-4 Ultrium 1840 SAS
1U Rack-Mount Kit
HP StorageWorks SCSI
Tape Automation,
External
DAT 72x10 Autoloader
1/8 G2 Tape Autoloader
MSL2024
External
External
HP SC11Xe Host Bus Adapter
412911-B21
AH627A
HP U320e SCSI Host Bus Adapter
NOTE: Recommended for MSL tape libraries.
MSL4048
HP StorageWorks SAS
Tape Automation,
External
1/8 G2 Autoloader
MSL2024
HP SC44Ge Host Bus Adapter
416096-B21
about minimum SAS controller firmware version and SAS cabling
requirements.
MSL4048
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 26
QuickSpecs
Storage
HP ProLiant DL180 Generation 5 (G5)
HP StorageWorks Fibre
Tape Automation,
External
MSL2024
MSL4048
External
Please consult the EBS connectivity matrix at:
http://www.hp.com/go/ebs for detailed connectivity information.
N/A
N/A
N/A
HP StorageWorks RDX
Removable Disk Backup
System
RDX160
RDX320
External
External
USB 2.0 Port
HP StorageWorks D2D
Backup Systems
D2D120
Embedded Network Controller
D2D130
D2D2503i
D2D4004i
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 27
QuickSpecs
Power Specifications
HP ProLiant DL180 Generation 5 (G5)
750W Power Supply
Spare Kit
451366-291, B21
Operational Input
Voltage Range (Vrms)
90Vac to 264Vac full range
47 Hz to 63 Hz
Frequency Range
(Nominal) (Hz)
Nominal Input Voltage
(Vrms)
Max Rated Output
Wattage Rating
Nominal Input Current (A
rms)
100
750
9.1
115
750
7.9
200
750
4.3
220
750
4.0
230
750
3.8
240
750
3.7
Max Rated Input Wattage
Rating (Watts)
Max. Rated VA
(Volt-Amp)
893
911
888
906
872
890
862
880
862
880
862
880
Efficiency (%)
Power Factor
Leakage Current (mA)
Maximum Inrush Current
(A peak)
84
0.98
<0.43
30A
84.5
0.98
<0.50
30A
86
0.98
<.0.90
30A
87
0.98
<0.96
30A
87
0.98
<1.00
30A
87
0.98
<1.04
30A
Maximum Inrush Current
Duration (mS)
5mS
5mS
5mS
5mS
5mS
5mS
Optional Country Power Cords and Jumper Cords
WW
HP 2m 15A C20 C13 Universal Jumper Cord
HP 1.83m 10A C13 NBR14136 Power Cord
AF590A
Brazil
AF591A
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 28
QuickSpecs
Technical Specifications
HP ProLiant DL180 Generation 5 (G5)
System Unit
Dimensions (H x W x D) 3.44x 17.64 x 27.50 in (8.75 x 44.80 x 69.88cm)
(with bezel)
Weight
(approximate)
Maximum
51.5 lb (19.22 kg)
35.0 lb (13.06 kg)
100 - 240 VAC
(all hard drives, power
supplies and processors
installed)
Minimum
(one hard drive, power
supply and processor
installed)
Input
Requirements
(per power supply)
Rated Line Voltage
Rated Input Current
9.10 A (at 100 VAC),
4.5 A (at 200 VAC)
Rated Input Frequency
Rated Input Power
50 to 60 Hz
910 W (at 100 VAC),
900 W (at 200 VAC)
BTU Rating
Maximum
3107.82 BTU/hr (at 100 VAC),
3073.67 BTU/hr (at 200 VAC)
Power Specifications
To review typical system power ratings use the Power Calculator which is
available via the online tool located at URL:
Click on the system of interest. Example: DL180 G5
Follow the instructions of the next screens.
Power Supply Output
(per power supply)
Rated Steady-State Power 750 W (at 100 VAC),
750 W (at 200 VAC)
Maximum Peak Power
750 W (at 100 VAC),
750W (at 200 VAC)
System Inlet Temperature Operating
50° to 95°F (10° to 35°C) at sea level with an
altitude derating of 1.8°F per every 1000 ft
(1.0°C per every 305 m) above sea level to a
maximum of 10,000 ft (3050 m), no direct
sustained sunlight. Maximum rate of change is
18°F/hr (10°C/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 86°F (30°C).
Non-operating
Operating
-22° to 140° F (-30° to 60° C). Maximum rate of
change is 36° F/hr (20° C/hr).
Relative Humidity
(non-condensing)
10 to 90% relative humidity (Rh), 82.4° F (28° C)
maximum wet bulb temperature, non-
condensing.
Non-operating
5 to 95% relative humidity (Rh), 101.7° F (38.7°
C) maximum wet bulb temperature, non-
condensing.
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 29
QuickSpecs
Technical Specifications
HP ProLiant DL180 Generation 5 (G5)
Altitude
Operating
10,000 ft (3050 m). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 1500
ft/min (457 m/min).
Non-operating
30,000 ft (9144 m). Maximum allowable
altitude change rate is 1500 ft/min (457 m/min).
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
L
L
6.7 B
WAd
51 dBA
pAm
Operating
L
WAd
L
pAm
6.7 B
51 dBA
Embedded NC105i PCIe Network Interface
Integrated 10/100/1000BASE-T Transceiver
Gigabit Server Adapter
(Embedded)
Compatibility
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver.
Compliant to x1 PCIe Specification
Data Transfer Method
Network Transfer Rate
10Base-T (Half-Duplex)
10Base-T (Full-Duplex)
10 Mb/s
20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Half and
Full-Duplex)
2000 Mb/s
Connector
RJ-45
Cable Support
Performs all the physical layer functions for 10BASE-T, 100BASE-T, and
1000BASE-T Ethernet on standard Category 5 UT
Environment-friendly
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
Products and Approach and Recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 30
QuickSpecs
Technical Specifications
HP ProLiant DL180 Generation 5 (G5)
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DDowAnl-oa1d2fr9o0m3Www.WSoomraldnuwailds.eco—m. AVlel rMsaionnua1ls0Se—arcJhuAlynd1D4o,w2n0lo0a8d.
Page 31
|