| HP Scanjet 5370C Series Scanners - Installing and   Using the Active Transparency Adapter (XPA)   Introduction   The Use Transparency Adapter option lets you scan from the connected Active   Transparency Adapter (XPA) instead of scanning from the scanner bed. See the   following for instructions on how to install the Active XPA, as well as how to scan   general 5x5 inch transparencies and 35-mm slides.   NOTE: When Use Transparency Adapter is checked in the Tools menu, the Active   XPA icon appears in the status bar, but only if the Active XPA is connected.   If the menu item is dimmed, shut down HP Precisionscan Pro, connect the Active XPA   to the back of the scanner, and restart HP Precisionscan Pro.   Installing the Active XPA   Plug the Active XPA connector into the back of the scanner.   Figure 1: Plugging in the Active XPA connector   Scanning general transparencies   1. Place the large template on the scanner bed.   Step 1: Placing the large template on the scanner   2. For scanning general transparencies up to 12.7 x 12.7 centimeters (5 x 5   inches), position the transparency in the large cutout area in the middle of   the template.   Step 2: Positioning the transparency   Download from Www.Somanuals.com. All Manuals Search And Download.   NOTE: Your scanner may have a template that holds more than one slide. If you   have a multiple-slide template, you may need to cover or mask slots that are not in   use. This will ensure the best possible image quality.   2. Place the 35-mm slide in the cutout area in the middle of the small template.   Step 2: Position the slide   3. Place the Active XPA over the template. Align it to fit in the corner cutouts on the   large template.   Step 3: Aligning the Active XPA   4. Check the Use Transparency Adapter option in the HP scanning software.   NOTE: The Use Transparency Adapter option is under the Tools menu in HP   Precisionscan Pro.   5. Scan as you normally would.   SUMMARY: HP supplies all of their manuals and help files with your HP Scanjet   scanner on the CD-ROM. To access the information you must install the scanning   software from the CD-ROM. Once that is completed you can follow the path below to   the User Guide and much more. Choose Start/Programs/HP Scanjet Software/HP   Online Help, then click any of the items listed:     HP Scanjet Help   HP Scanjet Readme   Download from Www.Somanuals.com. All Manuals Search And Download.      HP Scanjet Support Supplement   Show Me Videos   User Guide   Copyright (C) Hewlett-Packard Co. 2000   This information is subject to change without notice and is provided "as is" with no   warranty. Hewlett-Packard shall not be liable for any direct, indirect, special, incidental   or consequential damages in connection with the use of this material.   Download from Www.Somanuals.com. All Manuals Search And Download.   |