hp
mp3320 series
digital projector
user’s guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Setting Up
What’s in the Box?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Identifying Common Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Projector at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Projector buttons and lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Back panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting Up the Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
To position the projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
To set up on a table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
To connect power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
To connect a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
To connect a handheld organizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
To connect video sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Turning On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
To turn the projector on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
To turn the projector off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Making Basic Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
To aim the projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
To adjust the focus and zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2 Giving Presentations
Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Showing Presentations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
To present from a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
To change the source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To hide or show the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
User’s Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Adjusting the Picture and Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To adjust a slanted picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To adjust the image according to the type of picture . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To adjust other image settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To adjust the audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To adjust the projector setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using the On-Screen Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
To change settings using the on-screen menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Quick choice menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Select input menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Adjust picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Help menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Performing Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
To get the projector status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
To clean the projector lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
To replace the lamp module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
To replace the battery in the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Upgrading the Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
To update the firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
5 Installing Permanently
Installing the Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
To install on a table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
To install on the ceiling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
To install for rear projection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
To mount the projector on a tripod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
To lock the projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Suggestions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Start-up problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Picture problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Sound problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Interruption problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Remote control problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Testing the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
To run the projector diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
7 Reference
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
LED safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Mercury safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
U.S.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Korea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
International. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Index
User’s Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
6
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Setting Up
■
■
■
■
■
“What’s in the Box?” on page 8
“Identifying Common Features” on page 9
“Setting Up the Projector” on page 15
“Turning On and Off” on page 24
“Making Basic Adjustments” on page 26
User’s Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
What’s in the Box?
Before setting up your projector, be sure your shipping box includes the following
items. If the shipping box does not contain any of the following items, contact HP.
1
2
8
7
5
6
4
3
Identifying the contents of the box
Symbol
1
Item
Projector
Function
Displays images.
Carrying case
USB cable
Carries and protects projector.
Connects to computer USB input.
Connects to computer video output.
Control projector.
2
3
VGA cable
4
Remote control
5
Quick Setup Guide, warranty, Provide documentation to help get started
support, and port activation
documentation
6
and find support.
Documentation CD
Contains user's guide and other
documentation.
7
8
Power cord
Connects projector to power source.
Appearance of included remote may vary from remote shown. Functionality is the same.
8
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Identifying Common Features
■
■
■
■
■
“Projector at a glance” on page 10
“Projector buttons and lights” on page 11
“Back panel” on page 12
“Remote control” on page 13
“Accessories” on page 14
User’s Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Projector at a glance
2
3
5
4
1
6
7
Identifying the projector
Symbol Item
Function
Power cord socket
Connects power cord to projector.
1
Button panel
Contains buttons and lights.
2
Zoom ring
Enlarges picture size 100–120%.
3
Focus ring
Focuses at distances of 1.2 to 12 m
(4 to 40 ft).
4
Height adjustment button
Adjusts the height of the picture.
5
6
7
Receiver for remote control Receives signals from the remote control.
Lens cover
Protects lens.
10
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Projector buttons and lights
1
2
6
3
5
4
8
7
Identifying buttons and lights on the projector
Symbol Item Function
Turns the projector on or off.
Power button
1
2
Enter button, back button,
and directional arrows
Change projector settings using the on-screen
menu.
Auto sync button
Resynchronizes the projector to the input
signal.
3
4
Page-up and page-down
buttons
Scroll up and down through pages on a
connected computer.
Lamp-warning light
Turns on when lamp fails.
5
6
Temperature-warning light
Turns on when the internal temperature is
too high.
Video button
Optimizes the picture for video input.
Optimizes the picture for data input.
Switches to the next input source.
7
8
9
Graphics button
Source button
User’s Guide
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Back panel
4
5
6
3
7
2
VGA in
in
in
S
1
Identifying the back panel
Symbol Item
Function
Security slot
Secures the projector using a cable lock.
1
Receiver for remote control
USB output
Receives signals from the remote control.
Connects to computer to control the mouse.
Connects audio source.
2
3
4
5
6
Audio input
Composite-video input (RCA) Connects video input from devices like VCRs.
S-video input
Connects video input from devices like VCRs
and DVD players.
VGA input
Connects video input from computers.
7
12
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Remote control
Before using the remote control, remove the battery protector by pulling the plastic tab
until it comes out of the remote control.
✎
6
5
7
5
2
4
3
2
1
8
9
Identifying the remote control buttons
Symbol Item
Function
Enter button, back button, and Change projector settings using the
1
directional arrows
on-screen menu.
Page-up and page-down
buttons
Scroll up and down through pages on a
connected computer.
2
Source button
Mouse pad
Switches to the next input source.
3
4
Moves the mouse pointer on a connected
computer.
Left-click and right-click mouse Perform left-click and right-click mouse
5
buttons
functions for a connected computer.
Hide button
Hides the display.
6
7
8
Power button
Turns the projector on or off.
Auto sync button
Resynchronizes the projector to the input
signal.
Picture mode button
Adjusts the picture so it is optimized for
either video input or data input.
9
User’s Guide
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Accessories
■
■
■
HP ceiling mount kit enables you to simply and discreetly install your projector
on the ceiling.
HP mobile screens with built-in handles are easy to carry and set up anywhere
you need them.
HP premium remote control allows you to control every aspect of your
presentation.
■
■
■
HP power cables allow you to connect in any region.
HP cables allow you to connect all audio-video equipment.
HP replacement lamp brings your projector up to factory-fresh brightness.
14
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Setting Up the Projector
■
■
■
■
■
■
“To set up on a table” on page 17
“To connect power” on page 18
“To connect a computer” on page 19
“To connect a handheld organizer” on page 20
“To connect video sources” on page 21
User’s Guide
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
To position the projector
The following tables show you where to position the projector in relation to the
screen.
Identifying image size relative to distance from screen
Image size (diagonal)
Image size (width)
Distance (lens to screen)
30 in.
40 in.
0.8 m
1.0 m
1.5 m
2.0 m
2.5 m
3.0 m
3.8 m
4.6 m
5.1 m
6.1 m
6.9 m
7.4 m
24 in.
32 in.
0.6 m
0.8 m
1.2 m
1.6 m
2.0 m
2.4 m
3.0 m
3.7 m
4.1 m
4.9 m
5.5 m
5.9 m
48–58 in.
64–77 in.
1.2–1.5 m
1.6–2.0 m
2.4–2.9 m
3.3–3.9 m
4.1–4.9 m
4.9–5.9 m
6.1–7.3 m
7.3–8.8 m
8.1–9.8 m
9.8–11.7 m
60 in.
48 in.
96–115 in.
128–154 in.
160–192 in.
192–230 in.
240–288 in.
288–346 in.
320–384 in.
384–461 in.
80 in.
64 in.
100 in.
120 in.
150 in.
180 in.
200 in.
240 in.
270 in.
290 in.
80 in.
96 in.
120 in.
144 in.
160 in.
192 in.
216 in.
232 in.
432–480 in. 11.0–12.0 m
464–480 in. 11.8–12.0 m
16
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
If you do not want to use the distance table, you can use the following equations to
help determine where to install the projector relative to the screen.
Calculating projection dimensions
distance from lens to screen = A × width of screen
minimum and maximum distance from screen = B
width of screen = 0.8 × diagonal of screen (for 4:3 screen)
projector lens below bottom of screen = C × width of screen (for 4:3 screen)
A = 2.0 to 2.4
B = 1.2 to 12 m (4 to 40 ft)
C = 0.11 to 0.42
To set up on a table
2. Connect one end of the power cord to the side of the projector and the other end to
an electrical outlet.
3. When you first turn on the projector, if the image is upside-down or backward,
settings using the on-screen menu” on page 37) and select Setup > Projector
position. Then choose Front Table from the drop-down list—this is the default
setting.
If you want to permanently install the projector on the ceiling or behind the screen, see
“Installing the Projector” on page 49.
User’s Guide
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
To connect a computer
1. Connect the VGA cable between the VGA port on the projector 1 and the VGA
port on the computer 2.
2. (Optional) To allow the remote control to function as the computer mouse,
connect the USB cable between the USB port on the projector 3 and the USB
port on the computer 4.
3. (Optional) To get audio, connect a mini-phone audio cable (not provided) between
the audio port on the projector 5 and the computer 6.
6
1
2
4
GA in
V
5
S
n
3
User’s Guide
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
To connect a handheld organizer
1. Be sure the handheld organizer has a VGA-out port. If necessary, install a
VGA-out accessory card into the organizer.
Not all handhelds come with VGA-out ports. For example, the iPAQ Pocket PC
requires a VGA-out PC Card with 15-pin connector.
✎
2. Connect the VGA cable between the VGA port on the projector 1 and the
VGA-out PC Card 2 on the organizer.
2
1
GA in
V
20
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
To connect video sources
If you have a SCART video device, you will need an adapter (available from HP) to
connect the device to the projector.
S-video connection
Many DVD players and VCRs have S-video output.
1. Connect an S-video cable (not provided) between the S-video port on the
projector 1 and the video device 2.
2. (Optional) To get audio, connect a mini-phone audio cable (not provided) between
the audio port on the projector 3 and the video device 4. If the video device has
RCA audio connectors, use a mini-phone to RCA adapter or cable.
4
2
1
3
S
in
in
User’s Guide
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Composite video connection
Many VCRs and other video equipment have composite video output, a single RCA
video output connector.
1. Connect a composite video cable (RCA connector) (not provided) between the
composite video port on the projector 1 and the RCA video port on the video
device 2.
2. (Optional) To get audio, connect a mini-phone audio cable (not provided) between
the audio port on the projector 3 and the video device 4. If the video device has
RCA audio connectors, use a mini-phone to RCA adapter or cable.
4
3
2
1
in
in
22
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Component video connection
Many DVD players and other video equipment have component-video output, three
RCA connectors labeled "Y,Pb,Pr", "R,G,B", or similar.
1. Connect a VGA-to-component video cable (available from HP) between the VGA
port on the projector 1 and the three RCA component-video connectors on the
video device 2.
2. (Optional) To get audio, connect a mini-phone audio cable (not provided) between
the audio port on the projector 3 and the video device 4. If the video device has
RCA audio connectors, use a mini-phone to RCA adapter or cable.
2
4
1
GA in
V
3
S
in
in
User’s Guide
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Turning On and Off
This section provides instructions on turning the projector on and off.
■
■
“To turn the projector on” on page 24
“To turn the projector off” on page 25
To turn the projector on
1. Be sure the power cord is connected.
2. Open the lens cover 1 by rotating it.
3. Press the power button 2 on top of the projector, or press the power button on the
remote control.
2
1
4. Connect and power on the source, such as computer, handheld organizer, or DVD
player. See “Setting Up the Projector” on page 15 for more information.
24
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
To turn the projector off
1. Press the power button on the projector or remote control to turn off the projector.
The power button blinks during the cool-down period, then the projector turns off.
2. You can disconnect video and audio equipment from the projector during the
cool-down period, but not the power cord.
3. If you must unplug or remove the projector, wait until the power light stops
blinking, then unplug the power cord.
CAUTION: Do not disconnect power until the projector has cooled down (the fan
stops) and the power button stops blinking. Otherwise, you might shorten the life of
the lamp.
Ä
If you try to turn on the projector again during the cool-down period, it does not turn
on. Wait until the cool-down period ends and the power button stops blinking.
User’s Guide
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Making Basic Adjustments
This section provides instructions on making basic adjustments to the projector.
■
■
“To aim the projector” on page 26
“To adjust the focus and zoom” on page 27
To aim the projector
■
To raise the projected picture on the screen, press the height adjustment button 1
and lift the front of the projector to the desired display angle 2. Release the
button to lock the adjustment.
■
■
To lower the projected picture, press the height adjustment button while lowering
the front of the projector. Release the button to lock the adjustment.
To store the projector, press the height adjustment button and lower the projector
fully, then release the button.
1
2
When you tilt the projector up or down, the sides of the picture might become slanted.
To adjust the picture so the sides are vertical, see “To adjust a slanted picture” on
page 33.
If the picture is not level on the screen, screw the adjustable back foot in or out to level
the projector.
26
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
To adjust the focus and zoom
1. Rotate the focus ring until the image becomes clear. The projector can be focused
at distances of 1.2 to 12 m (4 to 40 ft).
2. Rotate the zoom ring to adjust the picture size from 100 to 120%.
If the picture does not fit the screen, you might have to move the projector closer to
the screen.
User’s Guide
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
28
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Giving Presentations
The chapter explains how to give presentations with the projector.
■
■
“Using the Remote Control” on page 29
“Showing Presentations” on page 31
Using the Remote Control
6
5
7
5
2
4
3
2
1
8
9
■
■
■
To turn the projector on or off, press the power button 7.
To hide or unhide the projected picture, press the hide button 6.
To switch to the next connected input source, press the source button 3.
User’s Guide
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Giving Presentations
■
■
To operate as a mouse on a computer, press the edge of the mouse pad 4 in the
direction you want the pointer to move, and press the left-click 5 or right-click 5
button. This feature requires a USB connection between the projector and
computer.
To control page-up and page-down on a computer, press the page-up
and
■
■
To optimize the picture for the type of input signal, press the picture mode
button. This changes between adjustments for video input and for data input.
/
To change projector settings using the on-screen menu, press enter and use the
navigation buttons to make the changes. See “Using the On-Screen Menu” on
page 36 for more details.
■
■
To exit from any on-screen menu or adjustment, press the back
To adjust synchronization, press the auto sync button.
button.
From within a distance of 9 m (30 ft), aim the remote control at the screen or at the
front or back of the projector.
✎
30
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Giving Presentations
Showing Presentations
This section describes several things you can do during presentations.
■
■
■
“To present from a computer” on page 31
“To change the source” on page 32
“To hide or show the display” on page 32
1. Be sure the computer is connected to the projector. See “To connect a computer”
on page 19 for more information.
2. Be sure the computer and the projector are on. See “To turn the projector on” on
page 24 for more information.
If the computer display is not projected on the screen, you might have to press a
function key (such as Fn + F4 or Fn + F5) to turn on the computer’s video port. See
the video port card shipped with the projector for more information.
✎
✎
3. If you want to adjust the projected image, see “Adjusting the Picture and Sound”
on page 33.
4. You can use the remote control to enhance your presentation. For more
information, see “Using the Remote Control” on page 29.
❏
To page through a presentation, press the page-up
buttons.
or page-down
❏
To move the mouse pointer, press the edge of the mouse pad in the direction
you want the pointer to move.
For the mouse and page-up
or page-down
operations, aim the remote control
at the screen or at the front or back of the projector from within a distance of 9 m
(30 ft).
These operations require a USB connection from the projector to the computer.
User’s Guide
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Giving Presentations
To change the source
To change the source, either:
■
■
Press the source button on the projector or remote control.
Open the on-screen menu, go to Select input and select the port to which the input
source is connected.
To hide or show the display
You can hide the display from your audience temporarily.
■
Press the hide button on the remote control. (If you press the hide button again
within 5 seconds, the display becomes completely blank, without the reminder
how to show the display again.)
■
Open the on-screen menu and select Quick choice > Hide.
The screen remains blank until you press the hide button again or any other button on
the projector or remote control.
If you are using Microsoft PowerPoint, you can also press the B key or the W key to
hide the display. The screen remains blank until you press the B key or the W key
again.
✎
32
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Adjusting the Projector
This chapter describes how to make adjustments to the projector.
■
■
“Adjusting the Picture and Sound” on page 33
Adjusting the Picture and Sound
■
■
■
■
■
“To adjust the image according to the type of picture” on page 34
“To adjust other image settings” on page 34
“To adjust the audio” on page 34
“To adjust the projector setup” on page 35
To adjust a slanted picture
If the picture has slanted sides on the screen, you can straighten them. This is done by
making the top or bottom shorter until the sides are straight.
1. Open the on-screen menu and select Quick choice > Keystone.
2. Adjust the keystone setting as needed using the menu buttons on the projector or
remote control:
❏
If the top of the picture is too wide or too narrow, press left
until the width is corrected.
or right
❏
If one side of the picture is too tall or too short, move the projector until it is
straight in front of the screen, not off to one side.
3. Press the back
button to save the settings.
User’s Guide
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projector
To adjust the image according to the type of picture
Use the picture mode buttons on the projector or the remote control to optimize the
image.
■
■
■
To optimize the picture for data presentations, press the graphics
projector.
button on the
The graphics button turns on.
To optimize the picture for video images, press the video
projector.
button on the
The video button turns on.
To switch between these settings, press the picture mode
remote control.
/
button on the
To adjust other image settings
The on-screen menu provides many settings that allow you to fine-tune the picture.
1. Open the on-screen menu and select Adjust picture.
2. Change the picture adjustments as needed.
From the Adjust picture menu, you can change basic and advanced picture
options, such as brightness, contrast, aspect ratio, and keystone correction.
To get descriptions for all available picture adjustments, see “Adjust picture menu” on
page 40.
To exit from any on-screen menu or adjustment, press the back
button.
✎
To adjust the audio
1. Open the on-screen menu and select Quick choice.
2. Set the audio adjustments.
From the Quick choice menu, you can adjust mute and volume.
34
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projector
To adjust the projector setup
1. Open the on-screen menu and select Setup.
2. Set the setup adjustments as needed.
From the Setup menu, you can select settings such as menu language, projector
position, and lamp saver mode.
To get descriptions for all available setup adjustments, see “Setup menu” on page 42.
User’s Guide
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projector
Using the On-Screen Menu
definitions. The tables in this section describe all the functions available in the
■
■
■
■
■
■
“Quick choice menu” on page 38
“Select input menu” on page 39
“Adjust picture menu” on page 40
“Setup menu” on page 42
“Help menu” on page 42
To exit from any on-screen menu or adjustment, press the back
button.
✎
36
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projector
To change settings using the on-screen menu
You can change the on-screen menu settings with either the buttons on the projector or
on the remote control.
1. Press enter on the projector or the remote control to open the on-screen menu.
2. Press up
or down
to highlight the desired menu, and press right
to
select the highlighted menu.
3. Press up or down to highlight the desired parameter, and press enter to
select the highlighted option.
4. Press left
or right
to select the desired setting. For certain settings, you see
a different display while making the change.
5. Press enter or other indicated button to return to the menu.
6. To go to a different menu, press left
and select the menu.
button.
7. To close the on-screen menu, press the back
If nothing occurs for a period of time, the on-screen menu closes. To change the
amount of time until the on-screen menu closes, open the on-screen menu and select
Setup > Timeout for menu.
When you make certain adjustments, you may want to change several related settings.
If a setting adjustment includes a hint for moving to related settings, you can press up
✎
or down
to quickly move to another setting and adjust it.
User’s Guide
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projector
Quick choice menu
Quick choice
Keystone
Corrects the slanted sides of an image.
Resets keystone correction to zero.
Reset keystone
Next input
Searches for the next available signal from an input
source.
Picture mode
Adjusts the color settings for the type of picture. You
can optimize the picture for computer presentations
or video output. The remote control and projector
have buttons to change the picture mode.
Brightness
Contrast
Hide
Brightens or darkens the image.
Sets difference between light and dark areas.
Removes all images from the screen.
Stops audio output.
Mute
Volume
Adjusts the volume.
38
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projector
Select input menu
For a visual aid, see “Back panel” on page 12.
Select input
VGA
Shows the input to the VGA port. This usually
connects to a computer, although it can also connect
to a component-video device. This input is normally
considered a graphics input.
Composite video
S-video
Shows the input to the yellow composite port (the
input to the left of the S-video port on the back
panel). The port usually connects to a TV or VCR.
This input is normally considered a video input.
Shows the input to the S-video port. This usually
connects to a video device, such as a VCR,
camcorder, or DVD player. This connection is
normally considered a video input.
Auto-scan sources
Sets whether the projector automatically searches for
input signals and displays the next one found.
User’s Guide
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projector
Adjust picture menu
Adjust picture
Picture mode
Adjusts the color settings for the type of picture. You
can optimize the picture for computer presentations
or video output. The remote control and projector
have buttons to change the picture mode.
Adjust picture mode...
Changes settings that define the current picture
mode.
White intensity
Sets the brightness of white areas.
Picture enhancement
Refines the color, lightness, and other characteristics
of the picture.
Color temperature
Aspect ratio
Shifts colors toward red or blue.
Selects the proportions of the image that is not
automatically corrected by the projector.
• To automatically adapt to most inputs, select
Best Fit.
• To stretch the picture to cover the entire projection
area, select Fill.
• To show each picture dot as one projected dot,
select 1-to-1.
If the input source is a widescreen device, go to
Adjust picture > Shape settings >
Widescreen input.
Reset this picture mode
Color settings...
Brightness
Resets the current picture mode to its default settings.
Adjusts the picture and colors.
Brightens or darkens the image.
Contrast
Sets the difference between light and dark areas.
Sharpens or softens the image.
Sharpness
Color saturation
Adjusts the intensity of colors.
40
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projector
Adjust picture (continued)
Tint
Shifts colors toward red or green.
Red
Adjusts the amount of red in the picture.
Adjusts the amount of green in the picture.
Adjusts the amount of blue in the picture.
Green
Blue
Color space
For certain component inputs, selects the type of
signal encoding used by the input source. You can
override the selection made by the projector.
Reset color settings
Shape settings...
Keystone
Resets these color settings to their default settings.
Adjusts the shape of the picture.
Corrects the slanted sides of an image.
Resets keystone correction to zero.
Reset keystone
Widescreen input
Sets whether a widescreen (16:9) input device is in
use.
VGA settings...
Auto-sync
Adjusts settings for the VGA input port.
Resynchronizes the projector to the input signal from
a computer. This can compensate for any change in
the signal.
Frequency
Tracking
Adjusts the timing of the projector relative to a
computer graphics card.
Synchronizes the projector to a computer graphics
card.
Vertical offset
Horizontal offset
Reset video settings
Shifts the image up or down within the projection
area.
Shifts the image left or right within the projection
area.
Resets all video settings to default settings.
User’s Guide
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projector
Setup menu
Setup
Language...
Lamp saver
Selects the language for the menus.
Sets a lower power level for the lamp.
Projector position
Adjusts the image to match the orientation of the
projector: upright or upside-down, in front of or
behind the screen. Inverts or reverses the image
accordingly.
Timeout for menu
Auto-scan sources
Sets how many seconds the on-screen menu waits for
input before it closes.
Sets whether the projector automatically searches for
input signals and displays the next one found.
Reset lamp hours
Reset all settings
For a new lamp, resets hours of use.
Resets all menu settings to default settings.
Help menu
Help
Displays information and status for the projector.
Diagnostics...
Show tests for checking the operation of the projector
and the remote control.
42
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Maintaining the Projector
This chapter explains how to maintain the projector.
■
■
“Performing Routine Maintenance” on page 43
Performing Routine Maintenance
■
■
■
■
“To get the projector status” on page 43
“To clean the projector lens” on page 44
“To replace the lamp module” on page 44
“To replace the battery in the remote control” on page 46
To get the projector status
■
Open the on-screen menu and select Help. This screen shows information and
status for the projector.
User’s Guide
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining the Projector
To clean the projector lens
■
To minimize the risk of damaging or scratching the lens surface, blow dust
particles off the lens with clean, dry, deionized air.
If this method does not work, use the following method:
■
Wipe the lens in a single direction with a clean, dry cloth. Do not wipe back and
forth across the lens.
If the cloth is dirty or smears the lens, wash the cloth. If the cloth is still dirty after
washing it or the fabric is damaged, replace it.
Ä CAUTION: Cleaning requires special consideration:
■ Do not spray any type of fluid or cleaner directly on the lens surface. Cleaners
might damage the lens.
■ Do not use fabric softener when washing a cleaning cloth or softener sheets
when drying the cloth. Chemicals on the cloth might damage the surface of the
lens.
■ Do not store a cleaning cloth in contact with the lens for a long time because
doing so contaminates the lens with dye from the cloth. The cloth can be
contaminated if left in the open air.
To replace the lamp module
Å WARNING: Replacing the lamp module requires special consideration:
■ To reduce the risk of injury, be careful when removing the lamp module as
broken glass might be present in the unlikely event the lamp is broken. If the
lamp is broken, contact HP about repairs that might be required.
■ The lamp contains a small amount of mercury. If the lamp breaks, adequately
ventilate the area where the breakage occurred. Disposal of this lamp might be
information, contact your local authorities or the Electronic Industries Alliance
(http://www.eiae.org).
■ Because the lamp assembly operates at a very high temperature, wait
30 minutes before removing the lamp module.
44
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining the Projector
1. Turn off the projector and allow it to cool for 30 minutes.
2. On the bottom of the projector, loosen the two screws on the lamp cover and
remove the cover.
3. Loosen the two screws on the lamp module and pull out the module.
4. Insert the lamp module and tighten the two screws.
5. Install the cover and tighten the two screws.
6. Turn on the projector. If the lamp does not turn on after the warm-up period, try
reinstalling the lamp again.
7. Open the on-screen menu and select Setup > Reset lamp hours.
User’s Guide
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining the Projector
To replace the battery in the remote control
1. Pull out the battery holder.
2. Insert the new battery in the holder.
3. Push the holder into the remote control.
1
3
2
When discarding old batteries, contact your local waste-disposal provider regarding
local restrictions on the disposal or recycling of batteries.
46
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining the Projector
Upgrading the Projector
To update the firmware
HP might periodically release updated versions of the projector firmware to enhance
the projector performance. The projector firmware version is shown in the on-screen
USB method
1. On a computer with a USB port, go to the HP projector upgrade website (see
introduction for this section) and download the latest file intended for a USB
upgrade.
2. Connect the USB cable between the USB port on the projector and the USB port
on the computer.
3. On the computer, run the file you downloaded by double-clicking the file. Follow
the on-screen instructions.
User’s Guide
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining the Projector
48
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Installing Permanently
Installing the Projector
■
■
■
■
■
“To install on a table” on page 49
“To install on the ceiling” on page 50
“To install for rear projection” on page 52
“To mount the projector on a tripod” on page 53
To install on a table
This installation is covered in detail in Chapter 1. See “Setting Up the Projector” on
page 15 for more information.
User’s Guide
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Permanently
To install on the ceiling
To install the projector on a ceiling, you will need a ceiling mount (available from
HP).
WARNING: To minimize the risk of injury from improperly installed equipment, it
is recommended that a professional installer performs the ceiling installation.
Å
The actual projector and mounting plate differ from those shown below, but the steps
are the same.
✎
1. Attach the mounting plate to the bottom of the projector. The pointed part of the
hole in the bracket faces the back of the projector. See the instructions that came
with the ceiling mount.
2. Attach the ceiling-mount bracket to the ceiling, and firmly secure with three or
four screws capable of holding 9 kg (20 lb). The ceiling-mount bracket must be
located 1.2 to 12 m (4 to 40 ft) in front of the screen. See the table in “Setting Up
the Projector” on page 15.
50
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Permanently
3. With the projector lens aiming away from the screen, insert the mounting plate
onto the bracket so the tabs engage, then pivot the projector so it aims forward.
Tighten the rear thumbscrew fully, then tighten the two other thumbscrews.
4. Adjust the on-screen menu to match your settings. Open the on-screen menu and
select Setup > Projector position. Then select Front Ceiling from the
drop-down list.
User’s Guide
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Permanently
If you do not use an HP ceiling mount, mount the projector according to the following
dimensions:
■
■
■
■
X = 82 mm (3.23 in.)
Y = 55 mm (2.17 in.)
Z = 110 mm (4.33 in.)
Thread size = M3
To install for rear projection
1. Place the projector 1.2 to 12 m (4 to 40 ft) behind a translucent screen that is
designed for rear projection.
See “To set up on a table” on page 17 or “To install on the ceiling” on page 50 for
more instructions.
2. Open the on-screen menu and select Setup > Projector position. Then select
Rear Table or Rear Ceiling from the drop-down list.
52
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Permanently
To mount the projector on a tripod
The projector includes standard tripod mount on the bottom of the projector. This
allows the projector to be mounted on tripods readily available at camera and other
electronic stores.
Ä CAUTION:
■ The tripod should be capable of supporting a weight of at least 5 lb. Refer to the
owner’s manual that came with your tripod for more information.
■ Do not overtighten the tripod mount screw. Doing so could strip the screw and
cause the projector to fall off the tripod.
To lock the projector
The projector includes a built-in slot to secure the projector with a cable and a lock
(such as the Kensington MicroSaver lock system, available at many computer stores).
1. Wrap the cable around a secure object, such as a table leg. Loop the cable to create
a slip knot around the stationary object, and be sure it cannot slip off.
2. Insert the lock 1 into the hole and twist the key 2.
1
2
User’s Guide
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Permanently
54
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Fixing Problems
This chapter describes potential problems and offers suggestions to help correct them.
■
■
“Troubleshooting Suggestions” on page 55
“Testing the Projector” on page 63
Troubleshooting Suggestions
To use this section, find the problem statement that is closest to your problem, then try
■
■
■
■
■
“Start-up problems” on page 56
“Picture problems” on page 57
“Sound problems” on page 61
“Interruption problems” on page 61
“Remote control problems” on page 62
User’s Guide
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Fixing Problems
Start-up problems
If no lights or sounds turn on:
❏
Be sure that the power cable is securely connected to the
projector and the other end is plugged into an outlet with power.
❏
Press the power button again.
If nothing is projected but the projector seems to start up:
❏
❏
Be sure the lens cover is open.
If the lamp indicator is on or blinking, unplug the projector after
it cools down. Remove and reinstall the lamp module. If this does
not fix the problem, install a new lamp.
❏
If the temperature indicator is on or blinking, turn off the
projector and allow it to cool before restarting it. If the warning
light turns on or blinks again, contact HP for assistance.
If the projector makes a “ticking” sound, if the projector lamp does not turn on,
and if the lamp indicator is on or blinking:
❏
The projector lamp is too hot to light. Turn off the projector and
wait for it to cool before turning it on again.
❏
If the lamp indicator is on or blinking, unplug the projector after
it cools down. Remove and reinstall the lamp module. If this does
not fix the problem, install a new lamp.
❏
The projector lamp has reached the end of its life. Replace the
lamp.
56
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Fixing Problems
Picture problems
If the image is not displayed on the screen, but the HP startup screen
is displayed:
❏
❏
Press the source button on the projector or remote control.
Turn off or disable the notebook or desktop computer screen
saver function.
❏
For a computer connection, ensure your notebook computer’s
external video port is turned on. See the video port card shipped
with the projector. On some notebooks, for example, press the
Fn + F4 function keys to turn on the external video port.
❏
❏
Verify that the right input source is connected. Open the
on-screen menu and go to Select input. Then set the correct input
port where the equipment is connected.
Verify that auto search is enabled. Open the on-screen menu and
go to Select input > Auto-scan sources.
If the wrong input source is displayed:
❏
Press the source button on the projector or the remote control to
select another active input source.
❏
Verify that the right input source is connected. Open the
on-screen menu and go to Select input. Then set the correct input
source.
❏
❏
Verify that the projector is enabled for auto-searching. Open the
on-screen menu and go to Select input > Auto-scan sources.
If the input source might turn off and on, open the on-screen
menu and go to Select input. Set Auto-scan sources to Off and
select the correct input source.
User’s Guide
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Fixing Problems
If the image is out of focus:
❏
❏
Be sure the lens cover is open.
While displaying the on-screen menu, adjust the focus ring. (The
image size should not change; if it does, you are adjusting the
zoom not the focus.)
❏
❏
Ensure the projection screen is 1.2 to 12 m (4 to 40 ft) from the
projector.
For a computer connection, set the display resolution on the
computer to 1024 x 768 pixels. If the computer has multiple
monitors, adjust the resolution of the monitor assigned to the
projector.
❏
Check the projection lens to see if it needs cleaning.
If an upside-down or reversed image is displayed:
The projector has been set to the wrong position setting. Open the
❏
on-screen menu, select Setup > Projector position, and select
the correct setting.
If the image is too small or too large:
❏
❏
Adjust the zoom ring on top of the projector.
Be sure the projector is 1.2 to 12 m (4 to 40 ft) from the
projection screen.
❏
❏
Open the on-screen menu and select Adjust picture > Adjust
picture mode > Aspect ratio. Try the different settings.
For a wide-screen picture, open the on-screen menu and select
Adjust picture > Shape settings and try setting Widescreen
input to Yes.
If the image has slanted sides:
❏
As much as possible, reposition the projector so that it is centered
on the screen and below the bottom or above the top of the
screen.
❏
Open the on-screen menu and select Quick choice > Keystone.
Adjust the setting as needed.
58
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Fixing Problems
If a scrolling or cut-off image is displayed:
❏
❏
Press the auto sync button on the projector or remote control.
For a computer connection, turn everything off, then power on
the projector first and power on the notebook or desktop
computer second.
❏
For a computer connection, if the above steps do not correct the
display image, adjust the resolution of the notebook or desktop
computer to 1024 x 768 pixels. If the computer has multiple
monitors, adjust the resolution of the monitor assigned to the
projector.
If the image is flickering or unstable:
❏
Press the auto sync button on the projector panel or remote
control.
❏
For a computer connection, set the display resolution to
1024 x 768 pixels. If the computer has multiple monitors, adjust
the resolution of the monitor assigned to the projector.
❏
For a computer connection, open the on-screen menu, select
Adjust picture > VGA settings and adjust the Frequency or
Tracking.
If the image is stretched:
❏
Open the on-screen menu and select Adjust picture > Adjust
picture mode > Aspect ratio. Try the different settings.
❏
Open the on-screen menu and select Adjust picture > Shape
settings. Try changing the Widescreen input setting.
If the image disappears from the computer screen:
For a notebook computer, you might be able to turn on both the
❏
external VGA port and the built-in screen. See the computer
manual or the projector’s video port guide.
If text or lines from a computer display seem rough or uneven:
❏
❏
Check the focus adjustment.
Open the on-screen menu and select Quick choice > Reset
keystone.
User’s Guide
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Fixing Problems
If the projected colors seem slightly wrong:
❏
If the video button on the projector is not lit, try pressing the
video button on the projector or the picture mode button on the
remote control.
❏
❏
❏
Open the on-screen menu and select Adjust picture > Color
settings. Adjust the color settings as needed.
Open the on-screen menu and select Adjust picture > Color
Settings > Color space. Change the selection.
Open the on-screen menu and select Help > Diagnostics.
Run color tests.
If the projected colors seem completely wrong:
❏
❏
Be sure the pins on the cable connectors are not bent or broken.
Open the on-screen menu and select Adjust picture > Color
settings > Color space. Change the selection.
❏
❏
Open the on-screen menu and select Help > Diagnostics.
Run color tests.
Reset the picture settings to the factory-default settings. See the
following problem.
If the picture settings are completely wrong and you cannot fix them:
❏
Reset the projection settings to the factory-default settings. To do
this, open the on-screen menu and select Setup > Reset all
settings, or hold down the down
+ up
+ right
buttons
on the projector for 5 seconds.
If the projector stops responding to all controls:
❏
If possible, turn off the projector, then unplug the power cord and
wait at least 15 seconds before reconnecting power.
60
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Fixing Problems
Sound problems
If no sound is coming out of the projector:
❏
❏
❏
Be sure you have an audio cable securely connected between the
projector and the input device.
Be sure that the mute and volume settings are correct on the input
device, such as a computer, DVD player, or camcorder.
Open the on-screen menu and select Quick choice. Check the
following settings:
◆
◆
Mute is turned off.
Volume is correct.
Interruption problems
If the lamp indicator or temperature indicator turns on or blinks:
❏
If the lamp indicator blinks, the lamp is not able to light. Wait for
the projector to cool, then try starting it again.
❏
If the lamp indicator is on or blinking, unplug the projector after
it cools down. Remove and reinstall the lamp module. If this does
not fix the problem, install a new lamp.
❏
If the temperature indicator turns on or blinks, the projector is too
hot. See the following problem.
If the projector suddenly shuts down and the temperature light turns on:
❏
If the temperature light is blinking, the fan is not working. Allow
the projector to cool for several minutes.
❏
If the temperature light is steady, the projector has overheated.
Allow it to cool for several minutes.
❏
❏
❏
If airflow is obstructed, remove the obstruction.
If possible, remove any sources of excess heat in the room.
If the condition occurs after restarting the projector, contact HP
to have the projector serviced or repaired.
User’s Guide
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Fixing Problems
If the lamp shuts off during a presentation:
❏
A minor power surge might cause the lamp to shut off. Wait a
few minutes, then power on the projector.
❏
If the lamp indicator is on or blinking, unplug the projector after
it cools down. Remove and reinstall the lamp module. If this does
not fix the problem, install a new lamp.
If the lamp burns out or makes a popping sound:
❏
If the lamp burns out and makes a popping sound, the projector
will not turn back on until the lamp module has been replaced.
❏
If the lamp breaks, contact HP about repairs that might be
required.
Remote control problems
If the remote control does not operate:
❏
Be sure nothing is blocking the remote control receiver on the
front or back of the projector. Move to within 9 m (30 ft) of the
projector.
❏
❏
Open the on-screen menu and select Help > Diagnostics.
Run remote control test.
Replace the battery in the remote control.
If only the mouse and page-up and page-down buttons do not work:
❏
Be sure you have a USB connection between the projector and
the computer.
❏
Open the on-screen menu and select Help > Diagnostics.
Run remote control test and USB test.
62
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Fixing Problems
Testing the Projector
The on-screen menu contains diagnostic tests you can use to verify the proper
operation of the projector and the remote control.
To run the projector diagnostics
1. Open the on-screen menu and select Help > Diagnostics.
2. Select a test to perform.
User’s Guide
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Fixing Problems
64
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Reference
the projector.
■
■
■
“Specifications” on page 65
“Safety Information” on page 70
“Regulatory Information” on page 72
Specifications
Because HP continually improves its products, the following specifications are subject
Identifying the projector specifications
Size
251 mm × 210 mm × 69 mm
(9.9 in. × 8.3 in. × 2.7 in.)
Weight
1.8 kg (3.9 lb)
Resolution
XGA
DLP
Technology
Video connectors
VGA input, S-video input, composite-video input (RCA)
Optional cable for component-video input
Audio connectors
Mini-phone stereo audio input
Video compatibility
NTSC M (3.58 MHz), 4.43 MHz; PAL B, D, G, H, I, M, N;
SECAM B, D, G, K, K1, L; HDTV 480i/p, 575i/p, 720p,
1080i
IR receivers
On front and back of projector
User’s Guide
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Identifying the projector specifications (continued)
Lens
2.0 to 2.4 throw ratio (distance/width)
Optical zoom
Keystone
Audio
1:1.2
Manual correction: up to +25° to –30° vertical
Monaural speaker, 1-W peak output
Lamp
200-W P-VIP lamp, 1.0-mm arc
2000 hours (half life)
Lamp-saver mode reduces lamp power to 160 W, extends
lamp life
Replacement lamp: L2152A
Light engine
Color system
0.7-in. 12° DDR DMD
XGA
Two preset color modes are available:
Graphics
Video
Remote control
Mounting options
Security
USB mouse
Ceiling and tabletop, front and rear projection
Kensington lock compatible
100 to 240 V at 50 to 60 Hz
Power
66
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Identifying the projector specifications (continued)
Noise level
Environment
38±2 dBA
Operating:
Temperature: 10 to 35°C (50 to 95°F)
Humidity: 80% RH max, non-condensing
Altitude: up to 3,000 m (10,000 ft), up to 25°C (77°F)
Storage:
Temperature: –20 to 55°C (–4 to 131°F)
Humidity: 80% RH max, non-condensing
Altitude: up to 12,000 m (40,000 ft)
User’s Guide
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Analog Video Mode Compatibility
Compatibility
Resolution
640 x 350
640 x 350
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
720 x 400
720 x 400
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1400 x 1050
1400 x 1050
640 x 480
V-Sync (Hz)
70
H-Sync (kHz)
31.5
37.9
VGA
85
85
37.9
60
31.5
37.9
72
75
37.5
85
43.3
70
31.5
37.9
85
SVGA
XGA
56
35.2
60
37.9
72
48.1
46.9
75
85
53.7
60
48.4
56.5
70
75
60.0
85
68.7
63.98
79.98
65.22
63.98
34.98
SXGA
SXGA+
60
75
60
60
MAC LC 13
66.66
68
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Analog Video Mode Compatibility (continued)
Compatibility
MAC II 13
MAC 16
MAC 19
MAC
Resolution
640 x 480
832 x 624
V-Sync (Hz)
66.68
74.55
75
H-Sync (kHz)
35
49.725
60.24
68.68
31.35
68.03
97.09
60
1024 x 768
1152 x 870
640 x 480
640 x 480
1024 x 768
640 x 480
800 x 600
1024 x 768
1152 x 870
1280 x 960
1280 x 1024
75.06
60
MAC G4
MAC G4
MAC G4
i Mac DV
i Mac DV
i Mac DV
i Mac DV
i Mac DV
i Mac DV
120
120
117
95
60
75
60
75
68.49
75
75
75
90.9
User’s Guide
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Safety Information
Safety precautions
Å WARNING: Observe the following precautions to reduce the risk of injury.
■
To prevent eye injury, do not look directly into the lens when the lamp is on.
■
To prevent electrical shock, do not expose the projector to rain or moisture. Do not
open the projector except as instructed by the manual.
■
To reduce the risk of fire or electrical shock, do not allow small metallic objects to
get inside the projector. Carry the projector only in its protective case, and do not
store paper clips or other small objects inside the case.
■
■
■
Allow the projector to cool before removing any cover and touching internal
components, as instructed by the manual.
Keep paper and other combustible material away from the projector lens to
prevent the possibility of fire.
Use only an approved power cord rated for the voltage and current marked on the
product label. Do not overload any outlet or extension cord.
70
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
LED safety
The infrared ports located on the digital projector and remote control are classified as
Class 1 LED devices according to International Standard IEC 825-1 (EN60825-1).
This device is not considered harmful, but the following precautions are
recommended:
■
■
■
If the unit requires service, contact an authorized HP service center.
Do not attempt to make any adjustment to the unit.
Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is
invisible light and cannot be seen.
■
Do not attempt to view the infrared LED beam with any type of optical device.
Mercury safety
WARNING: This digital projector lamp contains a small amount of mercury. If the
lamp breaks, adequately ventilate the area where the breakage occurred, discard
any nearby food and drink, and thoroughly clean the table surface around the
projector. Wash your hands after cleaning the area or handling a broken lamp.
Disposal of this lamp may be regulated due to environmental considerations. For
disposal or recycling information, please contact your local authorities or the
Å
User’s Guide
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Regulatory Information
This section presents information that shows how your digital projector complies
with regulations in certain regions. Any modifications to your digital projector not
expressly approved by HP could void the authority to operate the digital projector in
these regions.
U.S.A.
This digital projector has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This digital projector generates, uses, and can radiate radio frequency energy.
If not installed and used in accordance with the instructions, it can cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this digital projector does
cause harmful interference to radio or television reception (which can be determined
by unplugging the unit), try the following:
■
■
■
Reorienting or relocating the receiving antenna.
Relocating the digital projector with respect to the receiver.
Connecting the digital projector’s power cord to another power outlet.
Connections to peripheral devices
To maintain compliance with FCC Rules and Regulations, use properly shielded
cables with this device.
For more information, consult your dealer, an experienced radio/television technician,
or, prepared by the Federal Communications Commission, How to Identify and
Resolve Radio-TV Interference Problems. This booklet is available from the
U.S. Government Printing Office, Washington, DC 20402, Stock Number
004-000-00345-4. At the first printing of this manual, the telephone number was
202-512-1800.
Canada
This Class B digital apparatus complies with Canadian ICES-003.
72
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
International
For regulatory identification purposes, your product is assigned a regulatory model
number. The regulatory model number for your product is listed in the declaration of
conformity. This regulatory number is different from the marketing name and product
number.
DECLARATION OF CONFORMITY
According to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name:
Manufacturer's Address:
Hewlett Packard Company
Display Technologies & Products
1000 NE Circle Blvd.
Corvallis, OR 97330-4239
Declares, that the product(s):
Product Name:
Digital Projector
mp3320, mp3322 series
CRVSB-04VU
Model Number(s):
Regulatory Model:
Conforms to the following product specifications:
Safety: IEC 60950-1:2001/ EN 60950-1:2001 +A11:2004
IEC 60825-1:1993 +A1 / EN 60825-1:1994 +A11 Class 1 LED
GB4943-1995
EMC: AS/NZS CISPR22: 2002
EN55022: 1998+ A1: 2000+ A2: 2003 Class B
EN55024: 1998+ A1: 2001+ A2: 2003
EN61000-3-2: 2000
EN61000-3-3: 1995+ A1: 2001
FCC - 47 CFR Part 15, subpart B, Class B
ANSI C63.4 – 2003
ICES – 003: 2004
GB9254 – 1998, GB17625.1 - 2003
Supplementary information:
The product herewith complies with the requirements of following Directives and carries the CE marking
accordingly:
-Low Voltage Directive: 73/23/EEC
-EMC Directive: 89/336/EEC
[1] The product was tested in a typical configuration with Hewlett Packard Personal Computer peripherals.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Corvallis, Oregon, December 7, 2005
Steve Brown, General Manager
European Contact for regulatory topics only: Hewlett Packard GmbH, HQ-TRE, Herrenberger Straße 140, 71034
Boeblingen, Germany. (FAX:+49-7031-143143).
USA Contact: Hewlett Packard Co., Corporate Product Regulations Manager, 3000 Hanover Street, Palo Alto, CA
94304. Phone: (650) 857-1501.
74
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
User’s Guide
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
76
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
with S-video 21
contents
in the box 8
A
accessories
listing 14
adjust picture 34
aiming the projector
raising and lowering 26
analog video mode
compatibility 68
audio
dimensions
of screen and room 16
distance
setting up in relation to image 15
adjusting 34
firmware
B
updating 47
focus
adjusting 27
range of 27
back panel
identifying 12
buttons
projector 11
remote control 13
graphics mode
C
ceiling installation
H
setting up 50
handheld organizer
connecting 20
hide button
component video connection
connecting video source 23
composite video connection
connecting video source 22
configuration
using on-screen menu 37
connecting input sources
component video connection 23
composite video connection 22
computer with VGA port 19
handheld organizer 20
image
adjusting 34
input/output connectors
see back panel
installation
User’s Guide
Index 75
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
see ceiling installation
using 36, 37
see table installation
optimizing image 34
P
picture
K
Kensington lock 53
keystone correction
adjusting 33
adjusting 34
picture mode
changing 30, 34
definition 34
power
turning off 25
turning on 24
presentations
from a computer 31
projector
L
lamp module
replacing 44
lamp saver mode 35
language
changing 35
LED safety
precautions 71
lens
adjusting 33
identifying parts 10
maintaining 43
setting up 15
troubleshooting 55
upgrading 47
care 44
cleaning 44
lights
identifying 11
location
R
see ceiling installation
see table installation
lock 53
rear panel
rear projection installation
setting up 52
remote control
identifying 13
using 29
M
maintenance
routine maintenance 43
menu
see on-screen menu
reset 60
O
resetting
on-screen menu
projection settings 60
projector 60
about menu definitions 42
adjust picture menu definitions 40
quick choice menu definitions 38
select input menu definitions 39
setup menu definitions 42
S
safety information
LED 71
Index 76
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
precautions 70
SCART device 21
security
testing
diagnostics 63
tripod
mounting on 53
locking 53
setup
troubleshooting
adjusting 35
interruption problems 61
picture problems 57
remote control problems 62
sound problems 61
start-up problems 56
suggestions 55
see also ceiling installation
see also rear projection
slanted picture
see keystone correction
sound
turning off 25
see audio
source
changing 32
specifications
U
upgrading 47
V
of the projector 65
status
video mode
video sources 21
of projector 43
S-video connection
connecting video source 21
Z
zoom
T
adjusting 27
range of 27
table installation
setting up 17
User’s Guide
Index 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Index 78
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
|