Acer Projector
X1160/X1260 Series
User's Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Information for your safety and
comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
•
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
•
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
•
•
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
•
•
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
•
•
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, type
SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters
(15 feet) maximum length.
Download from Www.Somanuals.com. All Manuals Search And Download.
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
•
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
Do not look into the projector's lens when the lamp is on. The bright may
hurt your eyes.
•
•
Turn on the projector first and then signal sources
Do not place the product in following environments:
•
•
•
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector is necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shortening the life span and darkening the image.
•
•
•
Locations near fire alarms.
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
•
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
•
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
•
•
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, sugges to ensure the projector
completes its cooling cycle before disconnecting power.
•
Do not turn off the main power abruptly or unplug the projector during
operation. It can lead to lamp breakage, fire, electric shock or other
trouble. The best way is to wait for the fan to turn off before turning main
power off.
•
•
Do not touch air outlet grille and bottom plate which becomes hot.
Clean the air filter frequently if have. The temperature inside may rise and
cause damage when the filter/ventilation slots clogged with dirt or dust.
•
•
•
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the remote control.
•
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
•
•
•
•
•
•
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
The product will detect the life of the lamp itself. Please be sure to change
the lamp when is showing warning message.
When changing the lamp, please allow unit to cool down, and follow all
changing instructions.
Reset the "Lamp Hour Reset" function from the Onscreen display
"Management" menu after replacing the lamp module.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
•
•
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
Operating environment for using wireless function
(Optional)
Warning! For safety reasons, turn off all wireless or radio transmitting
devices when using your machine under the following conditions. These
devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth
and/or 3G.
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions.
This device meets RF exposure guidelines when used normally, and it and its
antenna are positioned at least 1.5 centimeters (5/8 inches) away from your
body. It should not contain metal and you should position the device the above-
stated distance from your body.
To successfully transmit data files or messages, this device requires a good
quality connection to the network. In some cases, transmission of data files or
messages may be delayed until such a connection is available.
Ensure that the above separation distance instructions are followed until the
transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device, and persons with hearing aids should not hold the device to the ear with
the hearing aid. Do not place credit cards or other magnetic storage media near
the device, because information stored on them may be erased.
Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF transmissions.
Pacemakers. Pacemaker manufacturers recommend that a minimum separation
of 15.3 centimeters (6 inches) be maintained between wireless devices and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers
should do the following:
•
Always keep the device more than 15.3 centimeters (6 inches) from the
pacemaker.
•
Not carry the device near your pacemaker when the device is switched on.
If you suspect interference, switch off your device, and move it.
Download from Www.Somanuals.com. All Manuals Search And Download.
viii
Hearing aids. Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer, or its
representative, of your vehicle or any equipment that has been added. Only
qualified personnel should service the device, or install the device in a vehicle.
Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment is improperly
installed, and the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Potentially explosive
atmospheres include areas where you would normally be advised to turn off
your vehicle engine. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Switch off the device at refueling points
such as near gas pumps at service stations. Observe restrictions on the use of
radio equipment in fuel depots, storage, and distribution areas; chemical plants;
or where blasting operations are in progress. Areas with a potentially explosive
atmosphere are often, but not always, clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where the air contains
chemicals or particles such as grain, dust or metal powders.
Caution for Listening
To protect your hearing, follow these instructions.
•
•
•
•
•
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Download from Www.Somanuals.com. All Manuals Search And Download.
ix
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit http://global.acer.com/about/
sustainability.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
information, check www.lamprecycle.org
Download from Www.Somanuals.com. All Manuals Search And Download.
x
First thing first
Usage Notes
Do:
•
•
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
•
•
Block the slots and openings on the unit provided for ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
•
•
•
•
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place In direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
•
Please do not open or disassemble the product as this may cause electric shock.
When changing the lamp, please allow unit to cool down, and follow all changing
instructions.
•
•
•
This product will detect the life of the lamp itself. Please be sure to change the lamp
when it shows warning messages.
Reset the "Lamp Hour Reset" function from the Onscreen display "Management"
menu after replacing the lamp module.
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
•
•
Turn on the projector first and then the signal sources.
Do not use lens cap when projector is in operation.
When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the procedures listed under
"Replacing the Lamp".
Download from Www.Somanuals.com. All Manuals Search And Download.
6
How to get a preferred image size by adjusting
17
19
21
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Product Features
This product is a single-chip DLP® projector. Outstanding features include:
•
•
DLP® technology
X1160 series: Native 800 x 600 SVGA resolution
X1260 series : Native 1024 x 768 XGA resolution
4:3 / 16:9 aspect ratio supported
•
•
•
ColorBoost technology comes with excellent color performance
Better Lumens brightness and a 2000:1 contrast ratio
Versatile display modes (Standard, Video, Bright, Blackboard, User 1, User
2) for optimum performance in any situation
•
•
NTSC / PAL / SECAM compatible and HDTV (720p, 1080i) supported
The eCaring button reveals Acer Empowering functions (eView, eTimer) for
easy adjustment of settings
•
•
•
Advanced digital keystone correction delivers optimum presentations
Multi-language onscreen display (OSD) menus
X1160: Manual focus and Fixed lens
X1260: Manual focus projection lens zooms up to 1.1X
•
•
2X digital zoom and pan move function
Microsoft Windows 2000, XP, Vista OS compliant
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Package Overview
This projector comes with all the items shown below. Check to make sure your
unit is complete. Contact your dealer immediately if any thing is missing.
Projector with lens cap
Power cord
VGA cable
CR2025
3V
Composite video cable
Battery
Security card
Acer Projector
Quick Start Guide
User’s guide
Remote control
Quick start guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Projector Overview
Projector Outlook
Front / upper side
5
6
7
1
2
3
4
#
1
Description
Zoom ring (X1260 series)
Focus ring
#
5
Description
Power button and Power Indicator LED
Remote control
2
3
4
6
7
Zoom lens
Remote control receiver
Lens cap
Rear side
1
2
3
7
4
8
9
6
5
#
Description
#
Description
KensingtonTM lock port
1
PC analog signal/HDTV/component
video input connector
6
2
3
4
S-Video input connector
Composite video input connector
USB connector
Below items are for X1260 series only:
7
8
RS232 connector
Monitor loop-through output
connector (VGA-Out)
5
Power socket
9
Audio input connector
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Remote Control and Control Panel Layout
1
2
9
3
4
10
5
6
9
11
7
8
12
13
14
#
Icon
Function
Description
1
Infrared
transmitter
Sends signals to the projector.
2
Power/Power
LED
Power button and Power Indicator LED.
3
4
POWER
Refer to the "Turning the Projector On/Off" section.
MENU
•
Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
5
Four directional Use up, down, left, right buttons to select items or make
select keys
adjustments to your selection.
6
7
8
9
ZOOM
Zooms the projector display in or out.
ASPECT RATIO
KeyPad 0~9
KEYSTONE
To choose the desired aspect ratio (Auto/4:3/16:9).
Press "0~9" to input a password in the "Security settings".
Adjusts the image to compensate for distortion caused by
tilting the projector (± 40 degrees).
10
11
RESYNC
SOURCE
Automatically synchronizes the projector to the input source.
Press "SOURCE" to choose RGB, Component, S-Video,
Composite and HDTV sources.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
#
Icon
Function
Description
12
HIDE
Momentarily turns off the video. Press "HIDE" to hide the
image, press again to display the image.
13
14
Empowering
key
Unique Acer functions: eView, eTimer Management.
FREEZE
To pause the screen image.
Note:
Remote Control Placement
Please refer to the illustration to attach the remote control to the projector.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Getting Started
Connecting the Projector
VGA
2
RS232
RS232
4
D-Sub
6
7
2
D-Sub
D-Sub
Y
1
3
Video Output
5
S-Video Output
#
Description
#
Description
1
Power cord
VGA cable
5
6
7
S-Video cable
2
3
4
Audio cable jack/jack
RS232 cable
Composite video cable
USB cable
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Turning the Projector On/Off
Turning on the Projector
1
2
Remove the lens cap.(Illustration #1)
Ensure that the power cord and signal cable are securely connected. The
Power indicator LED will flash red.
3
4
Turn on the projector by pressing "Power" button on the control panel,
and the Power indicator LED will turn blue. (Illustration #2)
Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
•
If the screen displays "Lock" and "Source" icons, it means the
projector is locked onto a specific source type and there is no such
type of input signal detected.
•
•
If the screen displays "No Signal", please make sure the signal cables
are securely connected.
If you connect to multiple sources at the same time, use the "Source"
button on the remote control to switch between inputs.
2
Power button
1
Lens cap
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Turning off the Projector
1
To turn off the projector, press the "Power" button twice. The message
below will display onscreen for 5 seconds.
"Please press power button again to complete the shutdown process."
2
Immediately after powering off, the Power indicator LED will flash RED
rapidly and the fan(s) will continue to operate for about 120 seconds. This
is to ensure that the system cools correctly.
3
4
Once the system has finished cooling, the Power indicator LED will turn
solid RED which means projector enter standby mode.
It is now safe to unplug the power cord.
Warning: Do not turn on the projector immediately after
powering off.
Note: If you wish to turn the projector back on, you must wait for
60 seconds at least to press the "Power" button to restart the
projector.
Warning indicators:
•
•
If the projector automatically shuts down and the Power indicator
quick flashing RED and steady BLUE by returns, please contact your
local reseller or service center.
If the projector automatically shuts down and the Power indicator
quick flashing RED and steady BLUE by returns, this indicates that the
projector has overheated. The message below will display onscreen if
this is about to happen:
"Projector Overheated. Lamp will automatically turn off soon."
•
If the Power indicator quick flashing RED and steady BLUE by returns
and the message below is displayed onscreen, please contact your
local dealer or service center:
"Fan fail. Lamp will automatically turn off soon."
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Adjusting the Projected Image
Adjusting the Height of Projected Image
The projector is equipped with elevator feet for adjusting the height of image.
To raise/lower the image:
1
Use Tilt adjusting wheel (Illustration #1) to fine-tune the display angle.
1
Tilt adjusting wheel
Download from Www.Somanuals.com. All Manuals Search And Download.
10
How to optimize image size and distance
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen.
•
X1160 series Example: If the projector is 3 m from the screen, good image
quality is possible for 76" image sizes .
•
X1260 series Example: If the projector is 3 m from the screen, good image
quality is possible for image sizes between 69" and 76".
Note: Remind as below figure, the space of 133 cm height is
required when located at 3m distance.
Max screen size
Min screen size
76"
B
69"
Height: 133cm
Form base to
top of image
Height:
120cm
C
A
3m
Desired Distance
Figure: Fixed distance with different zoom and screen size. (only for X1260
series, X1160 series is Fixed zoom lens)
Download from Www.Somanuals.com. All Manuals Search And Download.
11
X1260 series
Screen size
(Min zoom)
Screen size
(Max zoom)
Top
Top
Desired
Distance
(m)
From base to
top of image
(cm) <C>
From base to top
of image (cm)
<C>
Diagonal
(inch)
<B>
Diagonal
(inch)
<B>
W (cm) x
H (cm)
W (cm) x
H (cm)
<A>
1.5
2
34
46
70 x 52
60
38
50
77 x 58
66
93 x 70
80
103 x 77
88
2.5
3
57
116 x 87
100
120
140
160
181
201
241
281
321
361
401
441
481
63
128 x 96
111
133
155
177
199
221
265
310
354
398
442
487
531
69
140 x 105
163 x 122
186 x 140
209 x 157
233 x 174
279 x 209
326 x 244
372 x 279
419 x 314
465 x 349
512 x 384
558 x 419
76
154 x 115
179 x 135
205 x 154
231 x 173
256 x 192
308 x 231
359 x 269
410 x 308
462 x 346
513 x 385
564 x 423
615 x 462
3.5
4
80
88
92
101
114
126
151
177
202
227
252
278
303
4.5
5
103
114
137
160
183
206
229
252
275
6
7
8
9
10
11
12
Zoom Ratio: 1.1x
X1160 series
Screen size
Top
Desired Distance
(m) <A>
From base to top of
image (cm) <C>
66
Diagonal (inch)
<B>
W (cm) x H (cm)
1.5
2
38
50
77 x 58
103 x 77
88
2.5
3
63
128 x 96
111
133
155
177
199
221
265
310
354
398
442
487
531
76
154 x 115
179 x 135
205 x 154
231 x 173
256 x 192
308 x 231
359 x 269
410 x 308
462 x 346
513 x 385
564 x 423
615 x 462
3.5
4
88
101
114
126
151
177
202
227
252
278
303
4.5
5
6
7
8
9
10
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
12
How to get a preferred image size by adjusting
distance and zoom
A
50"
Desired
image size
D
Height
Form base to
top of image
2 m
B
2.2 m
Desired Distance
C
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring.
•
X1160 series Example: to obtain an image size of 50" set the projector at 2
m distance from the screen.
•
X1260 series Example: to obtain an image size of 50" set the projector at a
distance 2 m and 2.2 m from the screen and adjust the zoom level
accordingly.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
X1260 series
Desired Image Size
Distance (m)
Top (cm)
From base to top of
Diagonal (inch)
<A>
Max zoom
Min zoom
<C>
W (cm) x H (cm)
image
<D>
<B>
30
40
61 x 46
81 x 61
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
4.8
5.9
7.1
7.9
9.9
11.9
1.3
1.7
2.2
2.6
3.1
3.5
3.9
4.4
5.2
6.6
7.9
8.7
10.9
53
70
50
102 x 76
122 x 91
142 x 107
163 x 122
183 x 137
203 x 152
244 x 183
305 x 229
366 x 274
406 x 305
508 x 381
610 x 457
88
60
105
123
140
158
175
210
263
315
351
438
526
70
80
90
100
120
150
180
200
250
300
Zoom Ratio: 1.1x
X1160 series
Screen size
Top
Desired Distance
(m) <A>
From base to top of
image (cm) <D>
53
Diagonal (inch)
<B>
W (cm) x H (cm)
30
40
61 x 46
81 x 61
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
4.8
5.9
7.1
7.9
9.9
11.9
70
50
102 x 76
122 x 91
142 x 107
163 x 122
183 x 137
203 x 152
244 x 183
305 x 229
366 x 274
406 x 305
508 x 381
610 x 457
88
60
105
123
140
158
175
210
263
315
351
438
526
70
80
90
100
120
150
180
200
250
300
Download from Www.Somanuals.com. All Manuals Search And Download.
14
User Controls
Acer Empowering Technology
Acer Empowering Key provides three
Acer unique functions, they are "Acer
eView Management"and "Acer eTimer
Empowering Key
Management" respectively. Press "
"
key for more than one second to launch
the Onscreen display main menu to
modify its function.
Acer eView Management
Press " " to launch "Acer eView
Management" submenu.
"Acer eView Management" is for
display mode selection. Please refer to
Onscreen Display Menus section for
more detail.
Acer eTimer Management
Press " " to launch "Acer eTimer
Management" submenu.
"Acer eTimer Management" provides
the reminding function for
presentation time control. Please refer
to Onscreen Display Menus section for
more detail.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments
and change a variety of settings.
Using the OSD menus
•
•
To open the OSD menu, press "MENU" on the remote control.
When the OSD is displayed, use the
keys to select any item in the
main menu. After selecting the desired main menu item, press
submenu for feature setting.
to enter
•
Use the
keys to select the desired item and adjust the settings by
keys.
using the
•
•
•
Select the next item to be adjusted in the submenu and adjust as described
above.
Press "MENU" on the remote control, the screen will return to the main
menu.
To exit OSD, press "MENU" on the remote control again. The OSD menu
will close and the projector will automatically save the new settings.
Main manu
Setting
Sub manu
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Color setting
There are many factory presets optimized for various types of
images.
Display Mode
•
•
•
•
Standard: For common environment.
Video: For playing video in a bright environment.
Bright: For brightness optimization.
Blackboard: Blackboard mode can improve displayed color
when you project onto darker surfaces.
•
•
Utilizador 1: Memorize user’s settings.
Utilizador 2: Memorize user’s settings.
Adjust the brightness of the image.
Brightness
Contrast
•
•
Press
Press
to darken image.
to lighten the image.
"Contrast" controls the difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the
amount of black and white in the image.
•
•
Press
Press
to decrease the contrast.
to increase the contrast.
Adjust the color temperature. At higher color temperatures, the
screen looks colder; at lower color temperatures, the screen looks
warmer.
Color
Temperature
Effects the representation of dark scenery. With greater gamma
value, dark scenery will look brighter.
Degamma
Adjusts the red color.
Adjusts the green color.
Adjusts the blue color.
Color R
Color G
Color B
Adjusts a video image from black and white to fully saturated
color.
Saturation
•
•
Press
Press
to decrease the amount of color in the image.
to increase the amount of color in the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Adjusts the color balance of red and green.
Tint
•
•
Press
Press
to increase the amount of green in the image.
to increase the amount of red in the image.
Note: "Saturation" and "Tint" functions are not supported under computer
mode or DVI mode.
Image setting
Keystone
Adjust image distortion caused by tilting projection. (±40 degrees)
Use this function to choose your desired aspect ratio.
Aspect Ratio
•
•
•
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
Projection
Front-Desktop
•
The factory default setting.
Front-Ceiling
•
When you select this function, the projector inverts the image for
ceiling-mounted projection.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Rear-Desktop
When you select this function, the projector reverses the image so
you can project from behind a translucent screen.
Rear-Ceiling
•
•
When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
H. Position
(Horizontal
position)
•
•
Press
Press
to move the image left.
to to move the image right.
V. Position
(Vertical position)
•
•
Press
Press
to move the image down.
to move the image up.
Frequency
"Frequency" changes the projector's refresh rate to match the
frequency of your computer’s graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Tracking
Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
Sharpeness
Adjusts the sharpness of the image.
•
•
Press
Press
to decrease the sharpness.
to increase the sharpness.
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under DVI or Video mode.
Note: "Sharpness" functions is not supported under DVI and Computer
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Management setting
Auto Shutdown
Source Lock
The projector will automatically shutdown when there is no signal
input after the allocated time. (in minutes)
When source lock is turned "off", the projector will search for
other signals if the current input signal is lost. When source lock is
turned "on", it will "lock" the current source channel unless you
press "Source" button on the remote control for the next channel.
Menu Location
Choose the menu location on the display screen.
Lamp Hour Elapse
Lamp Reminding
Displays the lamp’s elapsed operating time (in hours).
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Lamp Hour Reset
Security
Press the
counter to 0 hours.
button after choosing "Yes" to turn the lamp hour
Security
This projector provides a useful security function for the
administrator to manage usage of the projector .
Press
to change the "Security" setting. If the security function
is enabled, your must enter the "Administrator Password" first
before changing the security settings.
•
Select "On" to enable the security function. The user has to
enter a password to operate the projector. Please refer to the
"User Password" section for details.
•
If "Off" is selected, then the user can turn on the projector
without password.
Timeout(Min.)
Once "Security" is activated to "On", the administrator can set
timeout function.
•
Press
or
to select the timeout interval.
•
•
The range is from 10 minute to 990 minutes.
When the time is up, the projector will prompt the user to
enter the password again.
•
•
The factory default setting of "Timeout(Min.)" is "Off".
Once the security function is enabled, the projector will
request user to enter password when switch on the projector .
Both "User Password" and "Administrator Password" can be
accepted for this dialogue.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
User password
•
•
Press
to setup or change the "User Password".
Press number keys to set your password on the remote control
and press "MENU" to confirm.
•
•
Press
to delete character.
Enter the password when you see "Confirm Password"
displayed.
•
•
The password should be between 4 and 8 characters long.
If you select "Request password only after plugging power
cord", the projector will prompt the user to enter the
password every time the power cord is plugged.
•
If you select "Always request password while projector turns
on", the user has to enter the password every time when the
projector is turned on.
Administrator Password
The "Administrator Password" can be used in both the "Enter
Administrator Password" and "Enter Password" dialog boxes.
•
•
Press
to change the "Administrator Password".
The factory default of "Administrator Password" is "1234".
If you forgot your administrator password, do the following to
retrieve the administrator password:
•
An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number which will be accepted by
projector anytime no matter what the Administrator
Password is.
•
If losing this security card and number, please contact with an
Acer service center.
Disable Power button
•
When "ON" is selected, only the Power Key on the remote
control can be used. If "OFF" is selected, then the Power Key
on either the remote control or the control panel can be used
to control the projector.
Reset
•
Press the button after choosing "Yes" to return the
parameters on all menus to the factory default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Timer setting
Timer Start
•
Press
Press
to start or stop the timer.
Timer Period
•
or
or
to adjust the timer period.
to which timer mode to display on the
Timer Display
•
Press
screen.
Timer Location
•
Choose the location of the timer on the screen.
Language setting
Language
Choose the multilingual OSD menu. Use the
to select your preferred menu language.
Press to confirm the selection.
or
key
•
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
#
Problem
Solution
1
No image appears
onscreen
•
•
•
Connected as described in the "Getting Started"
section.
Ensure none of the connector pins are bent or
broken.
Check if the projector lamp has been securely
installed. Please refer to the "Replacing the Lamp"
section.
•
Make sure you have removed the lens cap and the
projector is switched on.
2
Partial, scrolling
or incorrectly
displayed
image(For PC
(Windows 95/98/
2000/XP))
•
•
Press "RESYNC" on the remote control.
For an incorrectly displayed image:
•
Open "My Computer," open the "Control
Panel," and then double-click the "Display"
icon.
•
•
Select the "Settings" tab.
Verify that your display resolution setting is
lower than or equal to SXGA (1280 x 1024)
(X1160) or SXGA+ (1400 x 1050) (X1260).
Click the "Advanced Properties" button.
•
If the problem still appears, change the monitor display
you are using and follow the steps below:
•
Verify that the resolution setting is lower than
or equal to SXGA (1280 x 1024)(X1160) or
SXGA+ (1400 x 1050)(X1260).
•
•
Click the "Change" button under the
"Monitor" tab.
Click "Show all devices". Next, select "Standard
monitor types" under the SP box, and choose
the resolution mode you need under the
"Models" box.
•
Verify that the resolution setting of the
monitor display is lower than or equal to SXGA
(1280 x 1024)(X1160) or SXGA+ (1400 x
1050)(X1260).
Download from Www.Somanuals.com. All Manuals Search And Download.
24
3
Partial, scrolling
or incorrectly
displayed image
(For notebooks)
•
•
Press "RESYNC" on the remote control.
For an incorrectly displayed image:
•
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•
Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP
[Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5 ]
•
•
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
®
®
4
The screen of the
notebook
computer is not
displaying your
presentation
If you are using a Microsoft Windows based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
®
®
•
If you are using an Apple Mac OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On".
5
6
Image is unstable
or flickering
•
•
Adjust the "Tracking" to correct it. Refer to the
"Image Setting" section for more information.
Change the display color depth settings on your
computer.
Image has vertical
flickering bar
•
•
Use "Frequency" to make an adjustment. Refer to
the "Image Setting" section for more information.
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
7
8
Image is out of
focus
•
•
•
Make sure the lens cap is removed.
Adjusts the focus ring on the projector lens.
Make sure the projection screen is within the
required distance of 3.3 to 39.4 feet (1.0 to 12.0
meters) from the projector. Refer to the "How to
Get a Preferred Image Size by Adjusting Distance
and Zoom" section for more information.
Image is stretched
when displaying a
"widescreen"
DVD title
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•
If you play an Letterbox(LBX) format DVD title,
please change the format to Letterbox(LBX) in the
projector OSD.
•
•
If you play a 4:3 format DVD title, please change the
format to 4:3 in the projector OSD.
If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
9
Image is too small
or too large
•
•
•
Adjust the zoom lever on the front of the projector.
(X1260 series)
Move the projector closer to or further from the
screen.
Press "MENU" on the remote control. Go to "Image
setting --> Aspect Ratio" and try different settings or
press"Aspect Ratio" on the remote control to adjust
directly.
10
11
Image has slanted
sides
•
•
If possible, reposition the projector so that it is
centered on the screen.
Press the "Keystone
/
" buttonon the remote
control until the sides are vertical.
Image is reversed
•
Select "Image --> Projection" on the OSD and adjust
the projection direction.
Problems with the Projector
#
Condition
Solution
1
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
2
Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp"
section.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
OSD Messages
#
Condition
Message
Message Reminder
1
Fan Fail - the system fan is not working.
Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed to
cool down before it may be used.
Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
LED & Alarm Definition Listing
LED Messages
Power LED
Message
Red
Blue
Input Power Plug
Standby
Flash ON to OFF 100ms
--
V
--
Power button ON
Lamp retry
--
V
--
Quick Flashing
Power off (Cooling state)
Quick Flashing
V
--
--
Power button OFF:
Cooling completed;
Standby Mode
Error (Thermal Failure)
Error (Fan lock)
Quick Flashing RED and Steady BLUE by returns
Quick Flashing RED and Steady BLUE by returns
Quick Flashing BLUE and Steady RED by returns
Quick Flashing BLUE and Steady RED by returns
Error (Lamp breakdown)
Error (Color Wheel fail)
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Replacing the Lamp
Use a screwdriver to remove the screw(s) from the cover, and then pull out the
lamp.
The projector will detect the lamp life. You will be shown a warning message
"Lamp is approaching the end of its useful life in full power operation.
Replacement Suggested!" When you see this message, change the lamp as soon
as possible. Make sure the projector has been cooling down for at least 30
minutes before changing the lamp.
Warning: The lamp compartment is hot! Allow it to cool down
before changing the lamp.
1
2
3
4
To Change the Lamp
1
2
3
4
5
6
Turn off the projector by pressing the power button.
Allow the projector at least 30 mins to cool down.
Disconnect the power cord.
Use a screwdriver to remove the screw from the cover. (Illustration #1)
Push up and remove the cover.
Remove the two screws that secure the lamp module (Illustration #2) and
pull up the lamp bar.(Illustration #3)
7
Pull out the lamp module by force. (Illustration #4)
To replace the lamp module, reverse the previous step.
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Ceiling Mount Installation
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
1
Drill four holes into a solid, structurally sound part of the ceiling, and
secure the mount base.
Note: Screws are not included. Please obtain the appropriate
screws for your type of ceiling.
2
Secure the ceiling rod using the appropriate type of four-cylinder screws.
Ceiling Mount Base
- Attach to ceiling
Ceiling Mount Base
Long Rod
Extension Rod
Long Cylinder Cap
Allen Key
- For tightening/looseni
Screw Type A
50 mm length / 8 mm diameter -
Tightening Screw
Medium Rod
Download from Www.Somanuals.com. All Manuals Search And Download.
30
3
Use the appropriate number of screws for the projector size to attach the
projector to the ceiling mount bracket.
Screw Type B
Smaller Washer
Large Washer
Projector Bracket
Supports projector and allows -
for adjustments
Spacer
- For heat dissipation
Note: It is recommended that you keep a reasonable space
between the bracket and the projector to allow for proper heat
distribution. Use two washers for extra support, if deemed
necessary.
4
Attach the ceiling bracket to the ceiling rod.
Large cylinder cap
Allen Key
- For tightening/loosening
Screw Type A
50 mm length -
Tightening Screw
08 mm diameter
Download from Www.Somanuals.com. All Manuals Search And Download.
31
5
Adjust the angle and positioning as necessary.
Tightening Screw
Allen Key
Allen Key
Tightening Screw
Note: The appropriate type of screw and washer for each model is
listed in the table below. 3 mm diameter screws are enclosed in
the screw pack.
Models
Screw Type B
Diameter (mm)
Washer Type
Length (mm)
20
Large
V
Small
V
X1160/X1260
3
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Specifications
The specifications listed below are subject to change without notice. For final
specs, please refer to Acer's published marketing specifications.
®
Projection system
Resolution
DLP
X1160: Native: SVGA (800 x 600) , Maximum: SXGA
(1280 x 1024), WXGA+ (1440 x 900)
X1260: Native: XGA (1024 x 768), Maximum: SXGA+
(1400 x 1050), WXGA+ (1440 x 900)
Computer compatibility
Video compatibility
IBM PC and compatibles, Apple Macintosh, iMac and
VESA standards: SXGA, XGA, VGA, SVGA, SXGA+,
WXGA, WXGA+
NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/
K/K1/L), HDTV (720p, 1080i), EDTV (480p, 576p), SDTV
(480i, 576i)
Aspect ratio
4:3 (native), 16:9
2000:1
Contrast ratio
Displayable colors
Noise level
16.7 million colors
33 dBA (standard)
Projection lens
X1160: F/ 2.41, f = 21.79mm, Manual Focus
X1260: F/ 2.41 - 2.55, f = 21.79 mm - 23.99 mm, 1.1X
manual zoom lens
Projection screen size (diagonal) X1160: 25" (0.64 m) - 303" (7.70 m)
X1260: 23" (0.58 m) - 303" (7.70 m)
Projection distance
Throw ratio
3.3' (1.0 m) - 39.4' (12.0 m)
50"@2m (1.95 - 2.15:1)
Horizontal scan rate
X1160: 31k - 69 kHz
X1260: 31k - 80 kHz
Vertical refresh scan rate
Lamp type
50 - 85 Hz
160 W user-replaceable lamp
Lamp life
4000 hours
Keystone correction
Audio
+/- 40 degrees
Internal speaker with 2 W output (X1260 series)
2.3 Kg (5 lbs.)
Weight
Dimensions (W x D x H)
Digital Zoom
Power supply
Power consumption
267 mm x 187 mm x 80 mm (10.5" x 7.4" x 3.1")
2X
AC input 100 - 240 V auto-switching power supply
225 W
Operating temperature
Uniformity
5ºC to 35ºC / 41ºF to 95ºF
85%
Download from Www.Somanuals.com. All Manuals Search And Download.
33
I/O connectors
•
•
•
•
•
Power socket x1
VGA input x1
Composite video x1
S-Video x1
USB x1: for remote computer control
Below items are for X1260 series only:
•
•
•
RS232 x 1
VGA output x 1
3.5 mm audio jack input x 1
Standard package contents
•
•
•
•
•
•
•
•
AC power cord x1
VGA cable x1
Composite video cable x1
Remote control x1
Battery x 1 (for remote control)
User's guide (CD-ROM) x 1
Quick start guide x 1
Security card x 1
* Design and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Compatibility modes
A. VGA Analog
1
VGA Analog - PC Signal
Modes
VGA
Resolution
V.Frequency [Hz] H.Frequency [KHz]
640x480
640x480
60
72
31.50
37.90
37.50
43.30
31.50
37.90
35.20
37.90
48.10
46.90
53.70
49.725
48.40
56.50
60.00
68.70
63.80
67.50
77.10
63.98
76.97
79.98
59.70
75.23
63.98
34.93
37.90
48.40
68.68
75.00
31.35
34.93
37.90
640x480
75
640x480
85
720x400
70
720x400
85
SVGA
800x600
56
800x600
60
800x600
72
800x600
75
800x600
85
832x624
75
XGA
1024x768
1024x768
1024x768
1024x768
1152x864
1152x864
*1152x864
1280X1024
*1280X1024
*1280X1024
1280x960
*1280x960
*1400x1050
640x480
60
70
75
85
SXGA
70
75
85
60
72
75
QuadVGA
60
75
SXGA+
60
Power Mac G4
66.6(67)
60
800x600
1024x768
1152x870
*1280x960
640x480
60
75
75
PowerBook G4
60
640x480
66.6(67)
60
800x600
Note: "*" X1260 series
Download from Www.Somanuals.com. All Manuals Search And Download.
35
1024x768
1152x870
*1280x960
1024x768
60
75
75
75
48.40
68.68
75.00
60.00
i Mac DV (G3)
2
VGA Analog - Extended Wide Timing
Modes
WXGA
Resolution
1280x768
1280x768
*1280x768
1280x720
1280x800
1440x900
V.Frequency [Hz] H.Frequency [KHz]
60
75
85
60
60
60
48.36
57.60
68.630
45.00
49.702
55.935
Note: "*" X1260 series
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this projector.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Canada — Low-power license-exempt radio
communication devices (RSS-210)
a
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
Declaration of Conformity for EU countries
Hereby, Acer, declares that this projector series is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
documents.)
Compliant with Russian regulatory certification
Radio device regulatory notice
Note: Below regulatory information is for models with wireless
LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules). Below information is for products
with such devices.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
European Union (EU)
R&TTE Directive 1999/5/EC as attested by conformity with the following
harmonized standard:
•
•
•
Article 3.1(a) Health and Safety
•
•
EN60950-1:2001
EN50371:2002
Article 3.1(b) EMC
•
•
EN301 489-1 V1.4.1:2002
EN301 489-17 V1.2.1:2002
Article 3.2 Spectrum Usages
•
EN300 328 V1.5.1:2004
List of applicable countries
EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece, Spain, France,
Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland, Sweden, United
Kingdom Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic, Slovak Republic,
Slovenia, Cyprus and Malta. Usage allowed in the countries of European Union, as well as
Norway, Switzerland, Iceland and Liechtenstein. This device must be used in strict
accordance with the regulations and constraints in the country of use. For further
information, please contact local office in the country of use.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Acer America Corporation
333 West San Carlos St., San Jose
CA 95110, U. S. A.
Tel : 254-298-4000
Fax : 254-298-4147
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product:
DLP Projector
Model Number:
DSV0705/DNX0708
X1160/X1260 series
Acer America Corporation
Machine Type:
Name of Responsible Party:
Address of Responsible Party:
333 West San Carlos St.
San Jose, CA 95110
U. S. A.
Contact Person:
Phone No.:
Fax No.:
Acer Representative
254-298-4000
254-298-4147
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Acer Computer (Shanghai) Limited
3F, No. 168 Xizang medium road, Huangpu District,
Shanghai, China
Declaration of Conformity
We,
Acer Computer (Shanghai) Limited
3F, No. 168 Xizang medium road, Huangpu District,
Shanghai, China
Contact Person: Mr. Easy Lai
Tel: 886-2-8691-3089 Fax: 886-2-8691-3000
E-mail: [email protected]
Hereby declare that:
Product:
DLP Projector
Acer
Trade Name:
Model Number: DSV0705/DNX0708
Machine Type:
X1160/X1260 series
Is compliant with the essential requirements and other relevant provisions of the following EC directives,
and that all the necessary steps have been taken and are in force to assure that production units of the
same product will continue comply with the requirements.
EMC Directive 89/336/EEC, amended by 92/31/EEC and 93/68/EEC as attested by
conformity with the following harmonized standards:
-. EN55022:1998 + A1:2000 + A2:2003, AS/NZS CISPR22:2002, Class B
-. EN55024:1998 + A1:2001 + A2:2003
-. EN61000-3-2:2000, Class A
-. EN61000-3-3:1995 + A1:2001
Low Voltage Directive 73/23/EEC as attested by conformity with the following
harmonized standard:
-. EN60950-1:2001
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous
Substances in Electrical and Electronic Equipment
_______________________________
Easy Lai / Director
Acer Computer (Shanghai) Limited
Jun. 06, 2007
Date
-
Download from Www.Somanuals.com. All Manuals Search And Download.
|