2500C
Professional Series Color Printer
HP
QUICK REFERENCE GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
2500C
Contents
HP
Identifying Printer Parts
Control Panel
1
1
Navigating the Menu System
To Check the Printer's Configuration
To Print a Menu Map
1
1
2
To Print a Diagnostic Page
Common Printer Messages
2
2
Loading Paper
5
Loading Commonly-Used Media in Tray 2
Loading Commonly-Used Media in Tray 3
Loading Paper in Tray 1
6
8
9
10
11
11
11
12
14
14
15
Loading Paper in the Rear Manual Feed
Maintaining the Printer
Clean Printheads
Align Printheads
Removing Paper Jams
Resetting the Printer
Supported Paper Sizes
For More Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying Printer Parts
HP 2500C
Top Cover
Printhead Latch
Printhead
Access Cover
Ink Cartridge
Door
Paper
Knob
Back Panel
Tray 1/
Output Tray
Power
Button
Rear Access
Door
Tray 2
Extended
Tray Cover
Tray 3
2500C
HP
Control Panel
Navigating the Menu System
1. Press [Menu] until the desired menu appears.
2. Press [Item] until the desired item appears.
3. Press [Value] to enter the desired values.
To scroll through the values, you may press
and hold the [Value] key.
Menu Button
Item Button
Value Button
Select Button
4. Press [Select] to save or activate your
selection.
5. Press to exit the menu without changing
the settings or to get the printer online.
LCD Panel
To Check the Printer's Configuration
From the printer, you can print the following
information:
Cancel Job
Button
•
Menu Map - The Menu Map gives an
overview of the different settings that can be
configured as well as diagnostics that can
be performed through the key panel.
Diagnostic Page - The Diagnostic Page
shows general printer information and
current network parameters.
Attention (Red)
Ready (Green)
(Go)
•
1
Download from Www.Somanuals.com. All Manuals Search And Download.
To Print a Menu Map
1. Press [Menu] until SELF TEST MENU appears.
2. Press [Item] until PRINT MENU MAP appears.
3. Press [Select] to print the menu map.
For more information on the Menu Map items, please refer
to the User's Guide.
To Print a Diagnostic Page
1. Press [Menu] until SELF TEST MENU appears.
2. Press [Item] until PRINT DIAGNOSTIC
PAGE appears.
3. Press [Select] to print the diagnostic page.
For more information on the Diagnostic Page, please
refer to the User's Guide.
Common Printer Messages
Note: Brackets [ ] in the Message column indicate variables
MESSAGE
EXPLANATION
The printer is offline.
SOLUTION
OFFLINE
Press to set the printer online.
CANCELING JOB The printer is canceling
current print job.
[COLOR] INK OUT, One of the ink cartridges
Replace the appropriate
cartridge.
REPLACE CART
(black, cyan, magenta
or yellow) is out of ink.
[COLOR] CART
One of the ink cartridges
Replace the appropriate
cartridge.
FAULTY, REPLACE (black, cyan, magenta
or yellow) is faulty.
[COLOR] CART
One of the ink cartridges
Insert the appropriate
cartridge.
MISSING, INSERT (black, cyan, magenta or
yellow) is missing.
[COLOR] PRNT-HD One of the printheads
FAULTY, REPLACE (black, cyan, magenta
or yellow) is faulty.
Replace the appropriate
printhead.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
[COLOR] PRNT-HD One of the printheads
Insert the appropriate
printhead.
MISSING, INSERT
(black, cyan, magenta
or yellow) is missing.
PRNT-HD ACCESS The Printhead Access
COVER OPEN Cover is open.
Close the cover to resume
printing.
TOP COVER OPEN The Top Cover is open.
Close the cover and press
to resume printing.
PAPER JAM, OPEN There is paper jammed
Open the Top Cover to
remove paper. When
finished, close the Top
Cover and press to
resume printing.
TOP COVER
in the printer.
CARRIAGE JAM,
OPEN TOP COVER
The Carriage is jammed.
Open the Top Cover to
clear obstruction. When
finished, close the Top
Cover and press to
resume printing.
CARRIAGE JAM,
OPEN ACC COVER
The Carriage is jammed.
Open the Printhead Access
Cover to remove obstruction.
When finished, close the
Printhead Access Cover
and align printheads.
LEFT BACK PANEL The left side of the Back
Open the Rear Access
Cover and ensure that
the left side of the panel
is properly installed.
OUT
Panel has not been
inserted properly.
RIGHT BACK
PANEL OUT
The right side of the
Back Panel has not
been inserted properly.
Open the Rear Access
Cover and ensure that
the right side of the
panel is properly installed.
TRAY 2 PAPER
GUIDE REMOVED
One of the Paper
Guides in Tray 2 has
been removed.
Insert the Paper Guide
back into Tray 2.
TRAY 3 OPEN OR
GUIDE REMOVED
Tray 3 is either open or
one of its Paper Guides
has been removed.
Ensure that both the Paper
Guides are properly
installed and that Tray 3
is inserted into the printer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MNL FEED LOAD You have chosen to print
Load the paper type and
size as specified in the LCD
panel and press to
continue printing.
[TYPE] [SIZE]
through the Rear Manual
Feed.
TRAY [NUMBER]
EMPTY, LOAD &
PRESS
The specified tray is empty.
Load the paper size and type type which this tray
which this tray has been set
up for.
Load the paper size and
has been set up for.
If you wish to change the
paper size setting of this
tray, please refer to
section on Loading Paper.
PRESS TO
CONTINUE
To continue your present
task, press the button.
MEDIA IN TRAY 1, There is media in Tray 1 which Remove the media in Tray 1
REMOVE
may not be the type or size
that is specified in your
and press the button
to resume printing.
current print job.
If you wish to print
through Tray 1, set your
driver to pick from Tray 1
and send the print job
before putting media in
Tray 1.
WRONG MEDIA
TYPE, [ACTION]
The media type which the
printer has detected is not
the type specified in your
print settings.
You may wish to either
load in the right media, or
choose to print on existing
media. You may also cancel
the current print job by
pressing the [Cancel Print]
button.
UNEXPECTED
PAPER SIZE
The specified paper size
is different from the
Reload the correct media
into the tray and print again.
paper size in the selected
input tray. The output was
truncated to fit the paper
in the printer. Some output
may have been lost.
PRINT-HDS NOT The printheads have not
Align the printheads.
ALIGNED
been aligned. For best
print quality, align the
printheads before the
next print job.
See below for instructions
on how to align printheads.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
NON HP [COLOR] A non-HP color cartridge has
Use original HP ink
cartridges instead.
CART
been detected. HP does not
guarantee non-HP cartridges.
The use of incompatible
cartridges may disrupt the
intricate printing system,
potentially resulting in
reduced print quality and
even printer damage.
[COLOR] CART
NEAR EXPIRY
One of the ink cartridges (black, Be prepared to replace
cyan, magenta or yellow) is near the mentioned color
expiry. To obtain optimum
print quality, it is recommended
that you do not use expired
ink cartridges.
cartridge.
[COLOR] INK LOW One of the ink cartridges (black, Be prepared to replace
cyan, magenta or yellow) is low the mentioned color
on ink. You may still continue
to print with this cartridge until
the ink has totally run out.
cartridge.
2500C
HP
Loading Paper
The HP 2500C Series printer has 3 paper
trays and 1 rear feed for superior paper
handling capabilities.
Tray 1 - This tray acts as a by-pass tray. It
holds up to 10 sheets of paper. This tray
should be used for media types and sizes
that are seldom used.
Tray 2 - This tray holds up to 150 sheets of
paper. It is recommended that you use this
tray to hold paper that is commonly used.
Tray 3 - This tray holds up to 250 sheets of
paper. It is recommended that you use this
tray to hold paper that is commonly used.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Manual Feed - The Rear Manual Feed is
designed to provide a straight paper path for
printing on thicker media (up to 0.3mm) such as
cardstock or labels without bending. This paper
path allows you to print only 1 sheet at a time.
Loading Commonly-Used Media in Tray 2
Note:
•
Tray 2 is a fixed tray. Tray 1 has to be removed
before Tray 2 can be accessed.
•
Tray 2 is designed to hold up to 150 sheets of paper
and can accommodate paper sizes such as Letter,
A4, Legal, B4, A3, 11"x17", 13"x19" and 330x483mm.
1. Remove Tray 1 and set it aside.
1
2. If you wish to change the paper size setting
that has been set in the tray, go to step 3. If
you wish to load paper using the existing
tray setting, go to step 5.
2
3. Snap the Paper Length and Width Guides
into the slots. Paper size markings are
indicated beside their respective slots.
3
3
2
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. If you are loading paper sizes such as B4,
A3, 11"x17", 13"x19" and 330x483mm, unlock
the tray lock, extend the tray and re-lock the
tray lock.
4
If you are loading paper sizes such as Letter,
A4 and Legal, check that the tray is not
extended. If it is, unlock the tray lock, push
in the tray and re-lock the tray lock.
5. Insert paper, print side down into the printer.
6. Tap the left side of the stack of paper to
ensure that it is flushed to the right side of
the tray.
5
6
7. Replace Tray 1.
7
8. If Tray 2 is extended, place the Extended
Tray Cover over the tray.
8
9. On the control panel, press [Menu]
until PAPER HANDLING MENU appears.
10.Press [Item] to select TRAY 2 TYPE=
11. Press [Value] to select the media type you
have loaded into the tray and press [Select].
For more information, please refer to the User's Guide.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Commonly-Used Media in Tray 3
1. Grasp the sides of Tray 3 and pull it
out of the printer.
1
2
2. If you wish to change the paper size that has
been set in the tray, go to step
3. If you wish to load paper into tray using
the existing setting, go to step 5.
3. Snap the Paper Length and Width Guides
into the slots. Paper size markings are
indicated beside their respective slots.
3
3
A3
3
4. If you are loading paper sizes such as B4,
A3, 11"x17", 13"x19" and 330x483mm, unlock
the tray lock, extend the tray and re-lock the
tray lock.
4
If you are loading paper sizes such as Letter,
A4 and Legal, check that the tray is not
extended. If it is, unlock the tray lock, push
in the tray and re-lock the tray lock.
5. Load paper by aligning the paper edge to
the Paper Length guide first.
6. Tap the left side of the stack of paper to
ensure that it is flushed to the right side of
the tray.
5
6
A3
3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Re-insert Tray 3 into the printer.
7
8. If Tray 3 is extended, place the Extended
Tray Cover over the tray.
8
9. On the control panel, press [Menu]
until PAPER HANDLING MENU appears.
10.Press [Item] to select TRAY 3 TYPE=
11. Press [Value] to select the media type you
have loaded into the tray and press [Select].
For more information, please refer to the User's Guide.
Loading Paper in Tray 1
1. Set your driver to pick paper from Tray 1
and print your document. For more
information on how to set your print
settings, please refer to the Toolbox in
your computer.
1
2. After sending your print job to the printer,
the LCD panel will display the message
"TRAY 1 LOAD [TYPE] [SIZE]" where [TYPE]
and [SIZE] is the media type and size as
specified in your printer driver respectively.
3. Slide the paper width guide to its outermost
position.
4. Insert up to 10 sheets of paper along the
right side of Tray 1, print side down, until it
stops.
5. Slide the paper width guide in until it stops
at the edge of the paper.
6. Press the button to print.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Paper in the Rear Manual Feed
1. Set your driver to pick from the Rear
Manual Feed and print your document. For
more information on how to set your print
settings, please refer to the Toolbox in
your computer.
1
2. After sending your print job to the printer,
the LCD panel will display the message
"MNL FEED LOAD [TYPE] [SIZE]" where
[TYPE] and [SIZE] is the media type and
size as specified in your printer driver
respectively.
3. Insert the media into the Rear Manual Feed
at the back of the printer, making sure that
the edge of the sheet is aligned with the
alignment mark on the left side of the slot.
Wait for the printer to grip the media
before releasing it.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2500C
Maintaining The Printer
HP
Clean Printheads
Whenever print quality noticeably decreases
it is a good idea to perform the cleaning
procedure. You may “Clean Printhead” utility
either through the Toolbox in your computer
or from the Control Panel. Click on the
Maintenance Tab of the Toolbox if you wish
to clean the printheads from the Toolbox.
The “Clean Printhead” utility consists of 3
levels of cleaning. Each level of cleaning uses
some ink to clear the printheads. It is
recommended that you start with Level 1 before
proceeding to subsequent levels.
Note that Level 3 takes the longest and uses
the most ink.
To run the “Clean Printhead” utility through
the Control Panel:
1. Press [Menu] until DIAGNOSTICS MENU
appears.
2. Press [Item] to either CLEAN PRNT-HDS
LEVEL 1, 2 or 3.
3. Press [Select] to clean printheads.
Align Printheads
Although you may not notice misalignment,
it is recommended that you run the “Align
Printheads” utility whenever the LCD displays
the message "PRNT-HDS NOT ALIGNED".
This ensures that you have the best possible
print quality.
You may align the printheads either through
the Toolbox or from the Control Panel. Please
refer to the Maintenance Tab of the Toolbox if
you wish to align the printheads from the
Toolbox.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To run the “Align Printheads” utility through
the Control Panel:
1. Press [Menu] until DIAGNOSTICS MENU
appears.
2. Press [Item] until ALIGN PRNT-HDS
appears.
3. Press [Select].
4. The printer will print a page with 5 sets of
alignment patterns.
5. In each set (A, B, C, D or E) select the most
aligned (straightest) pair of lines (1, 2, 3, 4 or 5).
6. Enter the corresponding numbers in the
Control Panel by pressing [Value].
7. When you have entered a value for a set,
press [Item] to move to the next.
8. When you have finished entering the
values press [Select].
9. The printer will print a confirmation page
consisting of 2 squares and a cross.
10.Check the confirmation page to see if the
lines on the squares and the cross are
aligned.
11. Re-align the printheads if the confirmation
page is not satisfactory.
2500C
Removing Paper Jams
HP
If paper is jammed in the printer, follow these
instructions to clear the jam:
1
1. Remove all media from trays 1, 2 and 3.
Pull out any paper that is visibly stuck.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Lift the Top Cover and pull out any paper
that may be stuck.
2
3
3. If you are unable to free the jammed paper,
pull out the handle of the Paper Knob,
pull the knob away from the printer and
rotate to remove the paper.
3
4. If the LCD still reports a paper jam, go to
the back of the printer and lower the Rear
Access Door by lifting the two rear door
latches.
4
5
5. Remove the Back Panel by pressing the
two catches inwards.
6. Pull out any paper that may be stuck inside.
7. Replace the Back Panel and make sure it
fits securely.
8. Close the Rear Access Door and turn on
the printer.
6
7
8
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2500C
Resetting The Printer
HP
You can reset the printer by selecting the
reset items in the Resets Menu.
Use this menu with caution. You can lose
buffered page data or printer configuration
settings when you select these items. Only
reset the printer under the following
circumstances:
• You want to restore the printer's default settings;
• Communication between the printer and
computer has been interrupted.
2500C
Supported Paper Sizes
HP
The HP 2500C Professional Series Color
Printer is able to print on the following
paper sizes:
Tray 1 and Rear Media Feed:
All media sizes from 4” x 6” to 13” x 19” or
10.2cm x 15.3cm to 33cm x 48.3 cm
Tray 2 and Tray 3:
Letter (8.5” x 11”)
Legal (8.5” x 14”)
Tabloid (11” x 17”)
Super B (13” x 19”)
A4 (210mm x 297mm)
A3 (297mm x 420mm)
330mm x 483mm
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2500C
For More Information
HP
Please check on the following documentation
for more information:
Getting Started Guide – Information on how
to set up the printer.
User’s Guide - For printer specifications and
troubleshooting information.
Network Guide - For instructions on how to
share the printer over a network.
Toolbox - Provides “how-to” information and
troubleshooting instructions as well as access
to printer maintenance functions and HP
information.
or http://www.hp.com provides a link to the
HP Web site for the latest printer software,
product and support information.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
©Copyright 1998
Hewlett-Packard Company
450 Alexandra Road
Singapore 119960
Singapore.
Download from Www.Somanuals.com. All Manuals Search And Download.
|