12” (30cm)
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright and License
Product notice
© Copyright 2012 Hewlett-Packard
Development Company, L.P.
This guide describes features that are common
to most models. Some features may not be
available on your computer.
The information contained herein is subject to
change without notice. The only warranties for
HP products and services are set forth in the
express warranty statements accompanying
such products and services. Nothing herein
should be construed as constituting an
additional warranty. HP shall not be liable for
technical or editorial errors or omissions
contained herein.
Warranty Print on Demand Statement
You can find the expressly provided HP Limited
Warranty applicable to your product located with
the user guides on your computer and/or on the
CD/DVD provided in the box. In some countries/
regions, HP may provide a printed HP Limited
Warranty in the box. For some countries/regions
where the warranty is not provided in printed
format, you may request a printed copy from
hp.com/go/orderdocuments or write to:
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
North America: Hewlett-Packard, MS POD,
11311 Chinden Blvd., Boise, ID 83714, USA
Europe, Middle East, Africa: Hewlett-Packard,
POD, Via G. Di Vittorio, 9, 20063 Cernusco s/
Naviglio (MI), Italy
Asia Pacific: Hewlett-Packard, POD, P.O. Box
200, Alexandra Post Office, Singapore 911507
Microsoft and Windows are trademarks of
Microsoft Corporation in the U.S. and other
countries.
When you request a printed copy of your
warranty, please include your product number,
warranty period (found on your service label),
name, and postal address.
HP supports lawful use of technology and does
not endorse or encourage the use of our
products for purposes other than those
permitted by copyright law.
IMPORTANT!ꢀDo NOT return your HP product
to the addresses above. For U.S. products, go
worldwide support, go to
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Getting information
Type of information
Where to find
●
Set up your computer.
Quick Setup (this Guide)
Quick Setup (this Guide)
●
●
Use the computer.
Connect to the Internet.
●
Recover factory settings.
Troubleshooting and Maintenance Guide on your computer. Select the HP
Support Assistant app on the Start screen, select My computer, and
then select User guides.
●
See how-to videos about
using the features of your
computer.
●
●
Learn how to use the
Microsoft Windows operating
system.
Help and Support
From the Start screen, type h, and then select Help and Support. For
Find Windows password
information.
Windows troubleshooting tools
●
●
Find links to driver updates.
1. From the Start screen, type c, and then select Control Panel.
Read frequently asked
questions.
2. Select System and Security, and then under Action Center, select
Troubleshoot common computer problems.
●
Troubleshoot the most
common computer hardware
and software issues.
Troubleshooting and Maintenance Guide on your computer. Select the HP
Support Assistant app on the Start screen, select My computer, and
then select User guides.
●
●
Find electronic user guides
and specifications for your
computer model.
HP Support website: http://www.hp.com/go/contactHP
Order parts and find
additional troubleshooting
help.
●
●
Upgrade or replace
components of your
computer.
Upgrading and Servicing Guide
HP Support website: http://www.hp.com/go/contactHP
Find computer warranty
information.
HP Worldwide Limited Warranty and Technical Support included with your
computer.
Select the HP Support Assistant app on the Start screen, select My
computer, and then select User guides.
●
Get up-to-date information
and help from the Windows
community.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Type of information
Where to find
●
Connect to a TV.
Watching and Recording TV
Select the HP Support Assistant app on the Start screen, select My
computer, and then select User guides.
●
Maintain your computer.
HP Support Assistant — Maintains your computer performance and
resolves problems faster by using automated updates, on-board
diagnostics, and guided assistance.
Select the HP Support Assistant app on the Start screen.
Troubleshooting and Maintenance Guide
Select the HP Support Assistant app on the Start screen, select My
computer, and then select User guides.
Maintaining Your Computer (this Guide)
●
●
Find safety and regulatory
notices.
Regulatory, Safety and Environmental Notices
Select the HP Support Assistant app on the Start screen, select My
Find ergonomic information.
Safety & Comfort Guide
Select the HP Support Assistant app on the Start screen, select My
2
Chapter 1 Getting information
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Setting up your computer
WARNING! To reduce the risk of electrical shock or damage to your
equipment:
• Place the computer in a location away from water, dust, moisture, and
soot. These can increase the inside temperature, or can cause fire or
electrocution.
• Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
• Plug the power cord in a grounded (earthed) outlet that is easily
accessible at all times.
• Disconnect power from the equipment by unplugging the power cord
from the electrical outlet. To prevent direct exposure to laser beam, do
not try to open the enclosure of the CD or DVD drives.
• The power supply is preset for the country/region in which you
purchased your computer. If you move, check the voltage requirements
for your new location before plugging the computer into an AC power
outlet.
The computer may be heavy; be sure to use ergonomically correct lifting
procedures when moving the computer.
To reduce the risk of serious injury read the Safety & Comfort Guide. The
guide is located on the web at http://www.hp.com/ergo.
1. Place the computer so that all ventilation openings are unobstructed
and cabling is not in a walkway or where it can be stepped on or
damaged by placing furniture on it.
2. Connect all power cords from the monitor, computer, and
accessories to a power surge protection device that is specifically
labeled as having surge protection, an uninterruptible power supply
(UPS), or a similar device. If the computer has a television tuner, or
a modem or telephone connection, protect the computer by using
surge protection with these signal inputs as well. Connect the
television cable or the telephone line cord to the surge protection
device, and then connect the device to the computer.
3. Download and install operating system updates.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
a. Find out what operating system and version your computer is
currently running.
(From the Start screen, type c, select Control Panel, select
System and Security, and then select System. The operating
system and version are shown under Specifications.)
c. Select your country and language, if necessary, and click
Support & Drivers.
d. Select Download drivers and software (and firmware), type
your computer model name and number in the product field,
and press Enter.
e. If necessary, select your computer model from Product search
results.
f. Select your computer operating system.
g. Click Download next to each update you wish to download.
h. Follow the on-screen instructions to install each downloaded
update.
4. Look in the computer box for additional printed details or updates.
5. Read the Regulatory, Safety and Environmental Notices included
with your computer. Select the HP Support Assistant app on the
Start screen, select My computer, and then select User guides.
6. Read the Safety & Comfort Guide for proper workstation setup,
posture, health and work habits, and electrical and mechanical
safety information. Select the HP Support Assistant app on the
Start screen, select My computer, and then select User guides or
After you complete the initial computer setup, you might want to install
additional software programs or hardware devices. Check the operating
system, memory, and other requirements listed before purchasing new
software or hardware for your computer. Follow the software
manufacturer's directions to install the new software.
4
Chapter 2 Setting up your computer
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: Use only licensed original software. Installing copied software
could result in an unstable installation, infect the computer with a virus, or
be illegal.
Security solutions can deter theft, mishandling, and software attacks, but
cannot prevent them.
Connecting to the Internet
Steps to connect to the Internet:
1. Connect the hardware as shown on the setup view.
2. Get Internet service.
Sign up with an Internet Service Provider (ISP). If you already have
an account with an ISP, skip this step and follow the instructions
provided by the ISP.
3. Using your Internet connection through your ISP, open a web
browser and browse the Internet.
NOTE: If you have issues connecting to the Internet, see Internet
access on page 15.
Connecting to the Internet
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Setting up additional features
Using Beats Audio™ (select models only)
Your HP TouchSmart PC features audio connectors (headphone and
Audio Out ) that are optimized for Beats Audio™ headphones and
external audio systems (purchased separately). Select HP TouchSmart
PC models also include four Beats-optimized internal speakers and a
Beats toggle button on the keyboard.
Your computer comes ready for you to experience music with Beats
enabled. To disable Beats, press the Beats toggle button; the Beats off
icon appears on the screen. To turn Beats on, press the Beats toggle
button again. If your keyboard does not contain the Beats toggle button,
press Fn+B to enable and disable Beats. To view the Beats user
interface, from the Start screen, type b, and then select HP Beats Audio.
All you need to do is plug the Beats Audio headphones into the side
headphone connector to experience crisp and clear sound separation. To
experience the full capability of BEATS audio using the internal
speakers, HP recommends connecting a matching HP subwoofer to the
Sub connector on the back panel. If you are using an external audio
system, plug it into the Audio Out connector on the back panel.
6
Chapter 3 Setting up additional features
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the HDMI port controls (select models only)
The right side of your computer may contain an HDMI port and volume
control buttons. Unless a device is plugged into the HDMI port, the
volume controls have no functionality. The HDMI controls are only
intended to control the settings of the device plugged into that port, and
do not control any other media devices on the system.
To use the HDMI port controls, plug a device into the HDMI port. Press
the menu button (the top button displayed). A new on-screen menu
displays. Using the +/- buttons, select brightness, volume, contrast, or
color balance.
When a device is plugged into the HDMI port, the volume on the
computer is muted. Pressing the +/- buttons on the side panel does not
change the volume of the computer.
Using the HDMI port controls (select models only)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Maintaining your computer
Cleaning procedures
Keeping your computer system free of dust, dirt, and heat will prolong its life.
●
●
●
Dust, pet hair, and other particles can build up, creating a blanket effect; as a result, components can
overheat or, in the case of the keyboard and mouse, not work smoothly and effectively.
Check your system once a month for visible signs of dust and debris, and clean it about once every three
months.
Cleaning the computer
vents
Air vents keep the computer cool. Keep these vents clean by using a small,
battery-powered vacuum cleaner. (A battery-powered vacuum cleaner eliminates
the risk of electric shock.)
1. Vacuum the vents on the computer case.
2. Remove any debris that has accumulated in and around the computer
connectors (for example, the Ethernet and USB connectors).
8
Chapter 4 Maintaining your computer
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the keyboard and When cleaning the keyboard keys, use a low setting on a battery-powered vacuum
mouse
cleaner, to avoid removing key caps and springs.
1. Vacuum between the keys of the keyboard and along the grooves.
2. Use a clean, dry cloth and isopropyl (rubbing) alcohol to clean buildup on the
keyboard keys and along its edges.
3. Wipe the body of the mouse and the mouse cord by using cleaning wipes.
If you have a roller-ball mouse, clean the ball and rollers inside:
1. Turn the mouse upside down, and rotate the ball-cover ring counterclockwise
to remove the ring and release the roller ball.
2. Rinse the roller ball with soap and warm water.
3. Clean the rollers inside the mouse with a cotton swab dampened with
isopropyl (rubbing) alcohol.
4. After the roller ball and rollers are completely dry, replace the ball and ball-
cover ring.
Cleaning the screen (AiO
models only)
Follow these steps to clean the screen:
1. Turn off the computer. From the Start screen, move your cursor to the lower-
right corner of the screen to display the charms toolbar, and then select
Settings. Select the Power icon, and then select Shut down.
2. Disconnect the power cord from the wall.
3. Spray a small amount of mild glass cleaner on a soft cloth to clean the
screen.
4. Wipe the surface and left and right side of the screen to remove any dirt,
fingerprints, or other debris.
CAUTION: Do not spray or place the cleaner directly on the screen; spray the
cleaner into the cloth, and then wipe the sides and surface of the screen.
Do not use an abrasive cleaner or cloth when cleaning the sides or the surface of
the screen, because this could cause damage to the screen.
Cleaning procedures
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Troubleshooting
Refer to the documentation provided by the product manufacturer for
information about peripheral-specific problems, such as issues with a
monitor or a printer. The following tables present some issues you might
encounter while installing, starting up, or using your computer and
possible solutions.
For more information or for additional troubleshooting options, see
Getting information on page 1.
Computer does not start
Symptom
Possible solution
Error message:
Hard disk drive
error.
Restart the computer.
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Select the Power icon, and then select Restart.
Or, press and hold the Power button on the computer for 5 or more seconds to turn off
the computer, and then press the Power button to restart the computer.
3. If Windows opens, immediately back up all important data to a backup hard disk drive.
4. Contact Support, whether it was possible or not to start up Windows.
Either the hard disk drive or the system board may need to be replaced.
Computer will
not turn on or
start.
Ensure that the cables connecting the computer to the external power source are plugged in
properly. When the cables connecting the computer to the external power source are plugged
in properly, and the wall outlet is functioning, the green power supply light on the back of the
computer should be on; if it is not, contact Support.
Test the wall outlet by connecting a different electrical device to it.
10
Chapter 5 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible solution
Computer
seems to be
locked up and is
not responding.
Use the Task Manager to close any programs not responding, or restart the computer:
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Select Task Manager.
3. Select the program that is not responding, and then select End task.
If closing programs does not work, restart the computer:
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Select the Power icon, and then select Restart.
Or, press and hold the Power button on the computer for 5 or more seconds to turn off
the computer, and then press the Power button to restart the computer.
Error message:
Invalid system
disk or Non-
When drive activity stops, remove the disc and press the spacebar on the keyboard. The
computer should start up.
System disk or
Disk error.
Computer does not start
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Power
Symptom
Possible solution
Computer does
not turn off
Press and hold the Power button until the computer turns off. Check Power Settings.
when the Power
button is
pressed.
Computer shuts
down
automatically.
●
●
The computer might be in an exceedingly hot environment. Let it cool down.
Ensure that computer air vents are not blocked and that the internal fan is running —
see Cleaning procedures on page 8. (Your computer might not have an internal fan.)
Display (monitor)
Symptom
Possible solution
Screen is blank.
Press the space bar on the keyboard or move the mouse to make the screen display
visible again.
Press the Sleep button (select models only), or Esc on the keyboard, to resume from
Sleep mode.
Press the Power button to turn on the computer.
12
Chapter 5 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard and mouse (general)
Symptom
Possible solution
Keyboard
Use the mouse to turn off the computer, unplug and reconnect the keyboard to the back
of your computer, and then restart your computer.
commands and
typing are not
recognized by the
computer.
Mouse (with cable)
does not work or is
not detected.
Unplug and reconnect the mouse cable to your computer.
If the mouse is still not detected, turn off the computer, unplug and reconnect the mouse
cable, and then restart the computer.
Cursor does not
move using the
arrow keys on the
number keypad.
Press Num Lock on the keyboard to turn off Num Lock, so that the arrow keys on the
number keypad can be used.
Cursor does not
respond to mouse
movement.
Use the keyboard to save changes in all open programs, and then restart your computer:
1. Press the Alt+Tab keys simultaneously to navigate to an open program.
2. Press Ctrl+S simultaneously to save your changes in the selected program (Ctrl+S
is the keyboard shortcut for Save on most—not all—programs).
3. Repeat step 1 and step 2 to save changes in all open programs.
4. After saving changes in all open programs, press the Power button to turn off the
computer.
5. After the shutdown is complete, unplug and reconnect the mouse connector to the
back of your computer, and then restart your computer.
Keyboard and mouse (general)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard and mouse (wireless)
Symptom
Possible solution
Wireless keyboard
or mouse does not
work or is not
●
●
Ensure that you are using the wireless keyboard or wireless mouse within range of
the receiver, approximately 3 meters (10 feet) for normal use, and within 30 cm (12
inches) during initial setup or for re-synchronization.
detected.
Ensure that the mouse is not in Suspend mode, which occurs after 20 minutes of
inactivity. Click the left mouse button to reactivate it.
●
●
Replace the batteries in the keyboard and mouse.
Re-synchronize the keyboard and mouse to the receiver using the following steps.
The receiver, wireless keyboard, and wireless mouse shown in the following illustrations
are examples; your models might vary. IMPORTANT: During these steps, place the
wireless keyboard and wireless mouse on the same level as the receiver, within 30 cm
(12 inches) of the receiver, and away from interference from other devices.
1. Unplug the receiver from a USB connector on the computer, and then reconnect it.
Your computer model might have a connector dedicated to the receiver. If you have
a choice, use a USB connector on the front of the computer.
2. Check that the mouse is on (A), and push and hold the Connect button (B) on the
underside of the mouse for 5 to 10 seconds until the LED on the receiver lights or
stops flashing. The receiver connection session times out after 60 seconds. To
ensure that the connection was established, and that the receiver did not time out
instead, move the mouse and check for response on the screen.
B
Off
Connect
On
A
3. After the mouse connection is established, continue by using the steps that follow to
repeat the procedure for the keyboard.
4. Push and hold the Connect button (C) on the underside of the keyboard for 5 to 10
seconds until the LED on the receiver lights or stops flashing.
C
14
Chapter 5 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Speakers and sound
Symptom
Possible solution
No sound is
produced.
1. From the Start screen, type c, select Control Panel, and then select System and
Security.
2. Under Action Center, select Troubleshoot common computer problems, and
then select Troubleshoot audio playback.
If you are using built-in monitor speakers, use the monitor front-panel Volume button to
adjust volume. Use the front-panel buttons to enter the on-screen display (OSD) and
ensure that audio is enabled and that the volume is set appropriately.
Ensure that you connected powered (active) speakers and that they are turned on.
Turn off your computer, and then unplug and reconnect the speakers. Ensure that the
speakers are connected to an audio connector, not a Line In or headphone connector.
To resume from Sleep mode, press the Sleep button (select models only), or press Esc.
Unplug headphones if they are connected to your computer (or speaker system).
Volume is very low
or unsatisfactory.
Ensure that you connected the speakers to the Audio Out (lime green) connector on the
back of the computer. (Additional audio connectors are used for multiple-channel
speakers.) Detached non-powered speakers (speakers without a separate power source,
such as batteries or a power cord) do not produce satisfactory sound. Replace the non-
powered speakers with powered speakers.
Internet access
Symptom
Possible solution
Log in to your ISP, and start the desired program.
Internet programs
do not start
automatically.
Speakers and sound
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible solution
I cannot connect to
the Internet.
1. From the Start screen, type c, and then select Control Panel.
2. Under Network and Internet, select Connect to the Internet.
Verify that you are using the proper cables for your Internet connection type. Your
computer might have a dial-up modem and an Ethernet network adapter (also called a
network interface card, or NIC). A modem uses a standard telephone cable, whereas the
network adapter uses a network cable, to connect to a local area network (LAN). Do not
connect a telephone cable to the network adapter, and do not plug a network cable into a
telephone service line; doing so might damage the network adapter.
Run the wireless setup wizard:
1. From the Start screen, type c, select Control Panel, select Network and Internet,
and then select Network and Sharing Center.
2. In the Network and Sharing Center window, select Set up a new connection or
network to open the wizard, and then follow the on-screen instructions.
If your system has an external antenna, try to move the antenna to a better position. If the
antenna is internal, try to move the computer.
Try to connect again later, or contact your Internet service provider (ISP) for assistance.
16
Chapter 5 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Software troubleshooting
To repair
software
●
Turn the computer off completely and then turn it on again. This is the easiest (and
sometimes the best) way.
problems, try
these methods:
●
●
Update the drivers (see Updating device drivers, following).
Use Microsoft System Restore Software program and hardware driver reinstallation (see
Microsoft System Restore, later in this table). — Restores your computer to a
configuration that was in use before the software was installed.
●
●
Reinstall the software program or hardware driver (see Software program and hardware
driver reinstallation, later in this table). — Restores the software (if it came with the
product) or hardware driver to factory defaults.
System Recovery (see Troubleshooting and Maintenance Guide on your computer.
Select the HP Support Assistant app on the Start screen, select My computer, and
then select User guides). — Erase and reformat the hard disk drive, and then reinstall
the operating system, programs, and drivers. This erases all data files you have
created.
Updating device Complete the following procedure to update a driver, or to revert to an earlier version of the
drivers
driver if the new one does not solve your problem:
1. From the Start screen, type c and then select Control Panel.
2. Select System and Security, and then in the System area, select Device Manager.
3. Select the arrow to expand the type of device you want to update or roll back. (For
example, DVD/CD-ROM drives).
4. Double-click the specific item (for example, HP DVD Writer 640b).
5. Select the Driver tab.
6. To update a driver, select Update Driver, and then follow the on-screen instructions.
Or, to revert to an earlier version of a driver, select Roll Back Driver, and then follow
the on-screen instructions.
Microsoft
If you have a problem that might be due to software that was installed on your computer, use
System Restore System Restore to return the computer to a previous restore point. You can also set restore
points manually.
NOTE: Always use this System Restore procedure before you use the System Recovery
program.
To start a system restore or to add restore points manually:
1. Close all open programs.
2. From the Start screen, type c, and then select Control Panel.
3. Select System and Security, select System, and then select System protection.
4. Select the System protection tab on the System Properties screen.
5. Follow the on-screen instructions.
Software troubleshooting
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Software
If any of your factory-installed software programs or hardware drivers are damaged, you can
reinstall them by using the Recovery Manager program (select models only).
program and
hardware driver
reinstallation
NOTE: Do not use the Recovery Manager program to reinstall software programs that
came on CDs or DVDs included in the computer box. Reinstall these programs directly from
the CDs or DVDs.
Before you uninstall a program, be sure you have a way to reinstall it. Check to be sure that it
is still available from where you initially installed it (for example, discs or the Internet). Or
check to be sure that the program is in the list of programs you can reinstall from the
Recovery Manager.
To check the list of installable programs in the Recovery Manager:
1. From the Start screen, type r, and then select Recovery Manager. If prompted, select
Yes to allow the program to continue.
2. Under I need help immediately, select Software Program Reinstallation.
3. Select Next at the Welcome screen. A list of programs opens. Check whether your
program is there.
To reinstall a program using the Recovery Manager:
1. From the Start screen, type r, and then select Recovery Manager.
2. Select Software Program Reinstallation, and then select Next at the Welcome
screen.
3. Choose the program you want to install, select Next, and follow the on-screen
instructions.
4. When you have finished reinstalling, restart the computer. Do not skip this last step.
You must restart the computer after recovering software programs or hardware drivers.
To uninstall a program:
1. Close all software programs and folders.
2. From the Start screen, type c, and then select Control Panel.
3. Under Programs, select Uninstall a program.
4. Select the program you want to remove, and then select Uninstall.
18
Chapter 5 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Support information
Ways to get help
Easy to reach. Easy to use. Award-winning HP Customer Support is our
promise to help you get the most from your computer. Whether with tools
located on your computer, from information on the web, by phone, or
through your local retailer, you’ll find what you need.
Before contacting the HP Customer Care Center, it’s important to have
the following information handy.
●
●
●
●
●
●
Model number
Product number
Serial number
Software build number
Operating system
Purchase date
Please take a moment to write down your product information for future
reference.
The first four items on the list (model number, product number, serial
number, and software build number) can be viewed using HP Support
Information. From the Start screen, type s, and then select HP Support
Information.
Don’t forget to register!
Ways to get help
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Where to get help
1. Use Windows Help and Support for help with hardware and software
questions. From the Start screen, type h, and then select Help and
Support.
2. Use Support Assistant. From the Start screen, type h, and then
select HP Support Assistant. The HP Support Assistant provides
useful troubleshooting and diagnostics information and includes the
following:
●
●
●
E-mail support
HP Real Time Chat with qualified support specialists
Support phone numbers
3. For help online, go to the HP Customer Care Center website at
Phone assistance to get you up and running is covered for thirty (30)
days from the time you purchased your computer. After thirty (30) days,
there may be a charge, but the helpful support is still available.
20
Chapter 6 Support information
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer support for repairs
If your computer needs to be repaired or to have parts replaced, you
have two choices:
●
You can easily replace many of your computer parts that are
considered consumer replaceable. This is the fastest method of
repair, as many times we can send the part directly to your home or
business in a few days. (This option may not be available in all
countries/regions.)
●
If a repair is necessary, the HP Customer Care Center will make
arrangements to fix your computer.
These services are covered during the warranty period.
There are a few limitations and exclusions to the warranty (as well as
some important details), which are described in the HP Worldwide
Limited Warranty and Technical Support guide.
Before upgrading your hardware
Any hardware upgrades that you intend to do should only be done after
you have completely set up your new computer. Refer to the setup
instructions in the beginning of this Guide for help with setting up. If you
have any problems setting up your system and turning it on, immediately
contact the HP Customer Care Center listed earlier in this guide, and an
HP Customer Representative will assist you. This must be done first
before attempting to upgrade your system.
By breaking the security seal on the back of the computer, you are
confirming that the computer was working properly before you attempted
to upgrade your system. Once the security seal has been broken, your
computer is then, to the extent allowed by local law, covered under the
terms and conditions listed in the HP Worldwide Limited Warranty and
Technical Support guide.
Customer support for repairs
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
The power to make a change
Thank you for your purchase. HP is dedicated to producing the highest quality, best performing, and easiest to
use computers in the world. HP also designed this product with the environment in mind.
But to reduce its impact even further, we need your help.
Let’s work together to make a change.
How you can help
What we do
Recycle your old computer.
We design with the environment in mind.
Disposing of electronic waste responsibly has been While we want you to enjoy this computer for many
an HP priority for more than 20 years. If this
computer is a replacement for an older computer
you no longer need, go to
can help you dispose of your old computer with
minimum impact on the planet.
years to come, we recognize that you will eventually
dispose of it. We have designed it so it can be easily
dismantled and recycled as much as possible. The
packaging that came with your computer is also
designed for maximum recyclability.
Don't use a screen saver.
We design to be more energy efficient.
Screen savers can prevent your HP computer from
going to sleep and thereby waste power. Screen
savers can also reduce the life of your monitor by
This computer has HP Power Management Technology,
which can reduce computer energy use up to 45%
compared to computers without power management.
increasing the number of hours the LCD backlight is HP computers keep energy needs to a minimum, saving
on.
you money and reducing your carbon footprint.
Don't disable the power settings.
We design our products to use better and fewer
materials.
The power management tools on this computer are
set to minimize energy use without impacting
performance. Please do not disable them.
Ensuring the health of you, your family, and our planet
is a key priority at HP. We are committed to using the
safest materials in the production of this and all our other
products.
Printed in
*700608-001*
700608-001
Download from Www.Somanuals.com. All Manuals Search And Download.
|