HP Hewlett Packard Network Router HP 30 Coax User Manual

DYNAMIX HP-30 COAX  
128 Mbps  
HPNA 3.0 over Coax Ethernet Bridge  
User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HARDWARE INSTALLATION  
Parts Names and Functions  
LED Indicators on the Front Panel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ports on the Rear Panel  
Essential Hardwares  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware Connections  
1. Select a convenient location for the bridge near the PC or Ethernet device to which it will be  
connected. The bridge should be kept away from excessive heat.  
2. Using one coaxial cable to connect the HCNA port to F-Type connector on the wall. Using  
another coaxial cable to connect the other F-type TV port to TV set.  
3. Connect the LAN1/LAN2 port to your Ethernet equipped device.  
4. Connect the power adapter to the DC5V port into a wall outlet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The figure above shows how to connect an xDSL modem to a home coaxial cable network. Follow  
the same steps to connect any Ethernet device such as a HUB or printer, to a coaxial cable network.  
Now you should have connected the LAN port, HCNA port and the DC5V port to the appropriate  
devices or lines. LED will be as:  
POWER ON  
LAN Link/Act ON  
HCNA Link/Act ON  
HCNA SyncMode ON  
For more information on LEDs, see section  
"LED Indicators on the Front Panel"  
TROUBLESHOOTING  
The bridge has been designed to be a reliable and easy to use connection device. Please refer to the  
list below to aid in troubleshooting.  
The Power (green) LED is off.  
Make sure the power adapter is properly plugged into a live electrical outlet.  
The LAN(Ethernet) or HCNA Link/Act LED is off.  
Make sure the connection to these two ports is secure.  
The Ethernet or HCNA device to which you are connected should be powered on and properly  
configured  
.
The HCNA SyncMode LED is off.  
The LED should be always ON after power on.  
The Ethernet or HCNA device to which you are connected should be powered on and properly  
configured.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Standards  
IEEE 802.3 10BaseT Ethernet compliant  
IEEE 802.3u 100BaseT Fast Ethernet compliant  
HomePNA 3.0 over Coax (HCNA) compliant  
Data Rates  
HCNA: 128 Mbps  
Ethernet: 10/100 Mbps  
Distances  
HCNA : 1200 meter maximum between the two farthest nodes on LAN  
Ethernet: 100 meter maximum  
Power Consumption:  
5V DC IN, Less than 4 watt  
Certifications  
CE, FCC Part 15  
LEDs  
Power  
Ethernet Link/Activity  
HCNA Link/Activity; SyncMode  
Connectors  
Two F-Type connectors, one for connecting with HCNA device, and one for TV  
Two RJ-45 for 10/100M Ethernet  
Cables  
HCNA Network: F-Type RG-59U coaxial cable  
Fast Ethernet: CAT5 or better UTP  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Thermostat 308791E User Manual
Grizzly Dust Collector Model G8027 User Manual
Grizzly Window 1551 User Manual
Haier Dishwasher DW12 PFE2 User Manual
Hamilton Beach Can Opener 76370 User Manual
Hans Grohe Plumbing Product 31701001 User Manual
Harbor Freight Tools Kitchen Utensil 46749 User Manual
Hasbro Games The National American User Manual
Hoshizaki Ice Maker KM 1601MRH 3 User Manual
HP Hewlett Packard Stereo System HP 8671B User Manual