g e tting sta rte d g uid e
hp Linux worksta tion x1100
Ma n u fa ctu r in g Pa r t Nu m ber : A7868-90009
Ed ition E0202
© Copyright 2002 Hewlett-Packard Company.
Download from Www.Somanuals.com. All Manuals Search And Download.
p rinting history
The manual printing date and part number indicate its current edition.
The printing date will change when a new edition is printed. Minor
changes may be made at reprint without changing the printing date. The
manual part number will change when extensive changes are made.
Printed manual updates may be issued between editions to correct errors
or document product changes. Manuals that are published on the HP
often, please visit this web site periodically for the most recent versions.
To ensure that you receive the updated or new editions, you should also
subscribe to the appropriate HP product support service. See your HP
Sales Representative for details.
First Edition: February 2002
Printing Division:
Hewlett-Packard Co.
Technical Computer Division
3404 E. Harmony Rd.
Fort Collins, CO 80525
Printed in the U.S.A.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up your hp workstation x1100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
installation tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
connecting devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
connecting your keyboard and mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
setting the line voltage switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
connecting the power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
selecting a monitor for your workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
component overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
removing and replacing the cover and front bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
removing the workstation cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
removing the front bezel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
replacing the cover and front bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
removing and replacing workstation components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
starting and stopping your Linux workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
starting your workstation for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
initializing your software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
stopping your Linux workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
setting hardware passwords in the hp setup program. . . . . . . . . . . . . . . . . . . . . . . . . . 31
to set a password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
if you forget your user password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
viewing your workstation configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
configuring your workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
starting the hp setup program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
advanced menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
security menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
boot menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
power menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
using power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
software and driver availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
working in comfort and safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
preparing your work environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
your work posture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
additional ergonomic issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
additional system information and help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
5
Download from Www.Somanuals.com. All Manuals Search And Download.
configuring your Linux workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
setting the root password (required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
changing boot/network parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
setting up network authorization parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Xserver parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
system time, timezone and date parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
setting keyboard language (required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Netscape preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
recovering your Linux system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
the Linux rescue mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
booting single user mode directly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
screen is blank because the system failed to boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
solving hardware problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
troubleshooting tips: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
if you lose the key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
need more help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
pre-boot diagnostics audio signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
if you miss the beep code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
hp Diagtools hardware diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
obtaining e-Diagtools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
starting e-Diagtools from the utility partition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
starting e-Diagtools from the CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
running hp e-DiagTools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
producing a support ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
hp customer care center phone numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
A. w a r r a n ty a n d r egu la tor y in for m a tion
regulatory information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
FCC (for USA only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
hp hardware warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
three year limited hardware warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
6
Download from Www.Somanuals.com. All Manuals Search And Download.
limitation of warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
limitation of liability and remedies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
obtaining on-site warranty service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
customer responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
obtaining parts warranty service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
hp telephone support services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
hp software limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Con ten ts
8
Download from Www.Somanuals.com. All Manuals Search And Download.
p re fa c e
This guide describes how to set-up and use your HP Linux workstations
x1100. These workstations feature the Linux operating system.
Linux is a popular open source operating system that gives you the
ability to develop custom tools and applications or select from a growing
number of commercial software and freeware solutions.
im p orta nt wa rning s
a void ing e le c tric a l shoc ks
WARNING
To a void electr ica l sh ock , d o n ot op en th e p ow er su p p ly. Th er e
a r e n o u ser -ser vicea ble p a r ts in sid e.
To a void electr ica l sh ock a n d h a r m to you r eyes by la ser ligh t, d o
n ot op en th e la ser m od u le. Th e la ser m od u le sh ou ld be ser viced
by ser vice p er son n el on ly. Do n ot a ttem p t to m a k e a n y
a d ju stm en t to th e la ser u n it. Refer to th e la bel on th e CD-ROM
for p ow er r equ ir em en ts a n d w a velen gth . Th is p r od u ct is a cla ss I
la ser p r od u ct.
re m oving a nd re p la c ing the c ove r
WARNING
For you r sa fety, n ever r em ove th e Wor k sta tion cover w ith ou t
fir st d iscon n ectin g th e p ow er cor d fr om th e p ow er ou tlet a n d
r em ovin g a n y con n ection to a telecom m u n ica tion s n etw or k . If a
Pow er P r otection Device is fitted to you r Wor k sta tion , you m u st
sh u t d ow n you r com p u ter u sin g its on /off sw itch , th en r em ove
th e p ow er cor d befor e r em ovin g th e Wor k sta tion ’s cover. Rem ove
th e Pow er P r otection Device ca bles befor e a n y ser vicin g
op er a tion . Alw a ys r ep la ce th e cover befor e sw itch in g th e
Wor k sta tion on a ga in .
9
Download from Www.Somanuals.com. All Manuals Search And Download.
sa fe ty inform a tion
WARNING
Th er e is a d a n ger of exp losion if th e ba tter y is in cor r ectly
in sta lled . For you r sa fety, n ever a ttem p t to r ech a r ge,
d isa ssem ble, or bu r n a n old ba tter y. Rep la ce th e ba tter y w ith th e
sa m e or equ iva len t typ e, a s r ecom m en d ed by th e m a n u fa ctu r er.
Th e ba tter y in th is Wor k sta tion is a lith iu m ba tter y th a t d oes n ot
con ta in a n y h ea vy m eta ls. How ever, to p r otect th e en vir on m en t,
d o n ot d isp ose of ba tter ies in h ou seh old w a ste. Retu r n u sed
ba tter ies eith er to th e sh op fr om w h ich you bou gh t th em , to th e
d ea ler fr om w h om you p u r ch a sed you r Wor k sta tion , or to HP so
th a t th ey ca n eith er be r ecycled or d isp osed of in th e cor r ect
w a y. Retu r n ed ba tter ies w ill be a ccep ted fr ee of ch a r ge.
if you ha ve a m od e m
WARNING
Do n ot a ttem p t to con n ect th is p r od u ct to th e p h on e lin e d u r in g
a ligh tn in g stor m . Never in sta ll telep h on e ja ck s in w et loca tion s
u n less th e telep h on e lin e h a s been d iscon n ected a t th e n etw or k
in ter fa ce. Never tou ch u n in su la ted telep h on e w ir es or ter m in a ls
u n less th e telep h on e lin e h a s been d iscon n ected a t th e n etw or k
in ter fa ce. Use ca u tion w h en in sta llin g or m od ifyin g telep h on e
lin es. Avoid u sin g a telep h on e (oth er th a n a cor d less typ e)
d u r in g a ligh tn in g stor m . Th er e m a y be a r isk fr om ligh tn in g.
Never tou ch or r em ove th e com m u n ica tion s boa r d w ith ou t fir st
r em ovin g th e con n ection to th e telep h on e n etw or k .
Use m in im u m Nº 26 AWG w ir e for telep h on e ca ble.
WARNING
Som e p a r ts in sid e th e com p u ter m a y be h ot, w a it a p p r oxim a tely
th r ee to five m in u tes for th em to cool d ow n befor e tou ch in g
th em .
10
Download from Www.Somanuals.com. All Manuals Search And Download.
a void ing sta tic e le c tric ity
CAUTION
Static electricity can damage electronic components. Turn OFF all
equipment before installing an accessory card. Don’t let your clothes
touch the accessory card. To equalize the static electricity, rest the
accessory card bag on top of the Workstation while you are removing the
card from the bag. Handle the card as little as possible and with care.
inform a tion on e rg onom ic issue s
It is strongly recommended that you read the ergonomics information,
available in the Working In Comfort section of this manual, before using
your Workstation.
You can access more extensive ergonomics information from your
re c yc ling your worksta tion
HP has a strong commitment toward the environment. Your HP
Workstation has been designed to respect the environment as much as
possible. HP can also take back your old Workstation for recycling when
it reaches the end of its useful life. HP has a product take-back program
in several countries. The collected equipment is sent to one of HP’s
recycling facilities in Europe or the USA. As many parts as possible are
reused. The remainder is recycled. Special care is taken for batteries and
other potential toxic substances, these are reduced into non-harmful
components through special chemical processes. If you require more
details about HP’s product take-back program, contact your local dealer
or your nearest HP Sales Office.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
find ing inform a tion a nd he lp
If you w a n t...
Refer to...
To set up your
computer
•
•
x1100 Installation Poster — shipped with the
This manual — basic information only.
To troubleshoot
•
•
This manual — basic information only
your Workstation,
install accessories,
find part numbers.
x1100 Technical Reference — complete information
(web accessible, see the section “downloadable
documentation from hp’s web site” in this
Preface) including: system board switches, IRQs,
DMAs, and I/O Addresses, power consumption,
how to configure your network connection, parts
installation and troubleshooting.
Support
information
downloadable documentation, drivers and utilities,
service and support options.
Warranty
information
This manual. See “hardware warranty” or “hp software
limited warranty” in Appendix A.
d ownloa d a b le d oc um e nta tion from hp ’s we b site
contains a wide range of free information, including downloadable
documentation, service and support options, and the latest versions of
drivers and utilities.
To view and print the above guides, you must have Adobe’s Acrobat
Reader installed on your Workstation. You can download Adobe’s Acrobat
Reader free of charge from the Adobe Systems Incorporated web site:
12
Download from Www.Somanuals.com. All Manuals Search And Download.
h p x1100 tech n ica l ch a r a cter istics
Characteristics
HP Workstation x1100
Weight (configuration with one CD-ROM
drive, excluding keyboard and display)
14.8 kg (32.5 pounds)
Dimensions
Width: 20.6cm (8.1in.)
Height: 47.5cm (18.7in.)
Depth: 44.2cm (17.4in.)
Footprint
0.09 m2 (0.97 sq ft).
Power Supply
Input voltage (input current, max.)
100 - 127 VAC, 7.0 A rms
200 - 250 VAC, 3.5 A rms
Input frequency:
50/60Hz
Maximum output power for the power supply: 250 W
1
150W
Measured input power:
Storage Humidity
8% to 85% (relative)
Operating Temperature
+10 ˚C to +35 ˚C (+40 ˚F to +95˚F).
1. The measured input power for this workstation was determined by using
a typical configuration for your workstation. This configuration consists of
a: 2.2GHz, 512kB cache Pentium 4 processor, 18GB SCSI hard disk drive,
nVidia Quadro2 Pro graphics card, 512MB DDR SDRAM and 48× CD
drive.
NOTE
Operating temperature and humidity ranges may vary depending on the
mass storage devices installed. High humidity levels can cause improper
operation of disk drives. Low humidity can aggravate static electricity
problems and cause excessive wear of the disk surface.
Power consumption is valid for a standard configuration. For other
configurations, go to:
13
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
When the computer is turned off by the power button on the front panel,
the power consumption falls below 3W, but is not zero. This on/off
method extends the life of the power supply. To reach zero power
consumption in “off” mode, either unplug the power outlet or use a power
distribution unit with a switch. When the power consumption is zero for
an extended period of time, the life of the internal battery is shortened.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
setting up your hp workstation x1100
se tting up your hp worksta tion x1100
WARNING
If you h a ve a n y d ou bt th a t you ca n lift th e w or k sta tion or
m on itor sa fely, d o n ot tr y to m ove th em w ith ou t h elp .
1. Check the materials list shipped with your workstation to verify that
you have all of the components necessary for setting up your
workstation.
2. Place the workstation in an area with easily accessible power outlets
and enough space for the keyboard, mouse, and any other
accessories.
3. Position the workstation so that its rear connectors are easily
accessible.
insta lla tion tools
No tools are required to set up your workstation. However, if you plan to
install or replace an accessory inside your workstation, you will need a
T-10 and T-15 Torx screwdriver and a flat-blade screwdriver.
c onne c ting d e vic e s
Before connecting any cords or cables to your workstation, please read
the Warning Notices in the Preface of this manual.
If you purchased a graphics card that was not installed in your
workstation at the factory, you must install that card now. To install,
refer to the instructions that came with the card or see the x1100
16
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
setting up your hp workstation x1100
Figu r e 1-1
Loca tion of Rea r Pa n el Con n ector s
Cover lock
Line Voltage Switch
Power Connector
Keyboard connector
Mouse connector
Serial port A
Serial port B
Line Out (headphone) connector
Line In connector
Parallel port
Microphone connector
LAN connector
Dual USB connectors
Monitor connector
Match the color-codes of the connectors. The connectors are shaped to go
in one way only. Figure 1-2 shows typical connectors.
Figu r e 1-2
Typ ica l Con n ector s
Mouse (green)
Keyboard (purple)
25-pin Parallel connector
(burgundy):
Refer to the manual that came
with the printer.
Two 9-pin Serial connectors
(turquoise)
LAN:
Audio connectors:
You must use the network card
connector to connect to a LAN.
Microphone (pink)
Audio In (blue)
Audio Out (lime green)
Note: plugging in the audio
out connector disables the
internal speaker
Monitor connector:
Refer to the manual that came
with the monitor. You must use
the graphics card connector to
connect your monitor.
Two USB connectors (black)
Chapter 1
17
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
setting up your hp workstation x1100
c onne c ting your ke yb oa rd a nd m ouse
WARNING
Im p r op er a n d p r olon ged u se of k eyboa r d s a n d in p u t d evices ca n
be a ssocia ted w ith r ep etitive str a in in ju r y (RSI) to soft tissu es in
th e h a n d s a n d a r m s. If you d o exp er ien ce d iscom for t or p a in
w h ile u sin g a n y com p u tin g equ ip m en t, d iscon tin u e u se
im m ed ia tely a n d con su lt you r p h ysicia n a s soon a s p ossible.
You r com for t a n d sa fety a r e ou r p r im a r y con cer n . Con sequ en tly,
in for m a tion befor e u sin g you r w or k sta tion . For d eta iled
in for m a tion , visit HP ’s Wor k in g in Com for t Web Site a t:
A su m m a r y is p r ovid ed in th e “w or k in g in com for t a n d sa fety” on
p a ge 37.
connect your keyboard and mouse, follow these steps:
1. Connect your HP keyboard to the workstation. The connector is
color-coded for easy matching. See Figure 1-3.
2. Connect your HP mouse to the workstation. The connector is
color-coded for easy matching. See Figure 1-3.
Figu r e 1-3
Con n ectin g th e Keyboa r d a n d Mou se
18
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
setting up your hp workstation x1100
se tting the line volta g e switc h
CAUTION
Care must be taken to ensure that the line voltage switch is set correctly.
Failure to do this could destroy the power supply if the line voltage
switch is set to 115V and AC line voltage is 230V. If the line voltage
switch is set to 230V and the AC line voltage is 115V, your system will
fail to boot.
Before you connect your power cord to the workstation, you need to
ensure that the line voltage switch on the back of your workstation is set
switch, follow these steps:
1. Place the workstation so that you are looking at the back of it.
2. Use a small thin bladed screwdriver to slide the workstation’s line
voltage switch to the left until you see 115 in the right opening of the
switch or 230 in the left opening. See Figure 1-4.
Figu r e 1-4
Settin g th e Wor k sta tion ’s Lin e Volta ge Sw itch
Slide switch to left to get 115V
Slide switch to right to get 230V
Line
Voltage
Switch
Power Plug
Connector
Chapter 1
19
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
setting up your hp workstation x1100
c onne c ting the p owe r c ord
WARNING
For you r sa fety a lw a ys con n ect equ ip m en t to a gr ou n d ed w a ll
ou tlet. Alw a ys u se a p ow er cor d w ith a p r op er ly gr ou n d ed p lu g,
su ch a s th e on e p r ovid ed w ith th e equ ip m en t, or on e in
com p lia n ce w ith you r n a tion a l sa fety sta n d a r d s. Th is equ ip m en t
ca n be d iscon n ected fr om th e p ow er by r em ovin g th e p ow er cor d
fr om th e p ow er ou tlet. Th is m ea n s th e equ ip m en t m u st be
loca ted close to a n ea sily a ccessible p ow er ou tlet.
1. Connect the power cords to the rear of the monitor and the computer.
(The connectors are shaped to go in one way only.)
2. Connect the monitor’s power cord and the computer’s power cord to a
grounded outlet.
20
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
selecting a monitor for your workstation
se le c ting a m onitor for your worksta tion
Table 1-1 provides a list of display resolutions and frequencies for the
graphics cards supported by your workstation. Using these resolutions
your graphics card. Note that frequencies of 85Hz and higher provide
ergonomic flicker-free viewing.
If the monitor you select is DDC-2B or DDC-2B+ compliant, the graphics
card will automatically limit itself to those resolutions and frequencies
supported by that monitor. In this case, you do not need to use Table 1-1
to select your monitor.
CAUTION
To prevent possible damage to your monitor, make sure you select a
monitor that supports the resolutions and frequencies you wish to use.
Ta ble 1-1
Gr a p h ics Ca r d Resolu tion s a n d Fr equ en cies
Disp la y
2
Gr a p h ics Ca r d
Ver tica l Fr equ en cy (Hz)
1
Resolu tion
Matrox G450
640×480
60, 70, 72, 75, 85, 100, 120, 160, 200
60, 70, 72, 75, 85, 100, 120, 160, 200
60, 70, 72, 75, 85, 100, 120, 160
60, 70, 72, 75, 85, 100, 120
60, 70, 72, 75, 85, 100
800×600
1024×768
1280×1024
1600×1200
1920×1200
2048×1536
60, 70, 72, 75, 85, 100
60, 70, 72, 75, 85
nVidia Quadro2 EX
640×480
60, 70, 72, 75, 85, 100, 120, 140, 144, 150, 170, 200, 240
60, 70, 72, 75, 85, 100, 120, 140, 144, 150, 170, 200, 240
60, 70, 72, 75, 85, 100, 120, 140, 144, 150, 170, 200, 240
60, 70, 72, 75, 85, 100, 120, 140, 144, 150, 170
60, 70, 72, 75, 85, 100, 120
800×600
1024×768
1280×1024
1600×1200
1920×1200
2048×1536
60, 70, 72, 75, 85, 100
60, 70, 72, 75
Chapter 1
21
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
selecting a monitor for your workstation
Ta ble 1-1
Gr a p h ics Ca r d Resolu tion s a n d Fr equ en cies (Con tin u ed )
Disp la y
2
Gr a p h ics Ca r d
nVidia Quadro2 Pro
Ver tica l Fr equ en cy (Hz)
1
Resolu tion
640×480
800×600
1024×768
1280×1024
1600×1200
1920×1200
2048×1536
60, 70, 72, 75, 85, 100, 120, 140, 144, 150, 170, 200, 240
60, 70, 72, 75, 85, 100, 120, 140, 144, 150, 170, 200, 240
60, 70, 72, 75, 85, 100, 120, 140, 144, 150, 170, 200, 240
60, 70, 72, 75, 85, 100, 120, 140, 144, 150, 170
60, 70, 72, 75, 85, 100, 120
60, 70, 72, 75, 85, 100
60, 70, 72, 75
1. Only common resolutions are listed. Other intermediate resolutions are possible.
2. The maximum frequency may not be available at all color depths.
22
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
component overview
c om p one nt ove rvie w
This section provides information about locating accessories and
hardware parts in your HP workstation x1100.
Figu r e 1-5
Wor k sta tion
Front access shelves:
Power Supply Unit
Chassis Beam
Intrusion Switch
One 3.5-inch shelf
including a 1.44 MB floppy
disk drive
Three 5.25-inch drive
shelves (can be used for
optical drives)
CPU and Turbo Fan
Main Fan
Primary Hard Disk
Drive Shelf
Secondary Hard Disk
Drive Shelf
Two Memory Card
Slots
Four I/O Card Slots
Contact your dealer for an up-to-date list of supported devices or check
Chapter 1
23
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
removing and replacing the cover and front bezel
Figu r e 1-6
HP Wor k sta tion x1100 System Boa r d
Memory module sockets supporting
two DDR modules
Processor connector
(heatsink and
processor not shown)
Primary IDE
Connector
AGP Card Slot
Secondary IDE
Connector
Three PCI Card
Slots
Floppy Disk Drive
Connector
re m oving a nd re p la c ing the c ove r a nd front b e ze l
WARNING
For you r sa fety, n ever r em ove th e w or k sta tion cover w ith ou t
fir st d iscon n ectin g th e p ow er cor d fr om th e p ow er ou tlet a n d
r em ovin g a n y con n ection to a telecom m u n ica tion s n etw or k . If a
Pow er P r otection Device is fitted to you r w or k sta tion , you m u st
sh u t d ow n you r com p u ter u sin g its on /off sw itch , th en r em ove its
p ow er cor d befor e r em ovin g th e w or k sta tion ’s cover. Rem ove th e
Pow er P r otection Device ca bles befor e a n y ser vicin g op er a tion .
Alw a ys r ep la ce th e cover befor e sw itch in g th e w or k sta tion on
a ga in .
24
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
removing and replacing the cover and front bezel
re m oving the worksta tion c ove r
1. Switch off the display and computer. Disconnect all power cables and
any LAN or telecommunications cables.
2. Unlock the cover lock at the back of the workstation, if required. See
Figure 1-1.
3. Pull outward on the cover latch, grasp the edges of the cover and lift
the cover upward to remove it. See Figure 1-7.
Figu r e 1-7
Rem ovin g th e Cover
Cover Latch
Workstation
Cover
WARNING
Pa r ts in sid e th e com p u ter m a y be h ot, w a it for th em to cool
befor e tou ch in g th em .
Chapter 1
25
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
removing and replacing the cover and front bezel
re m oving the front b e ze l
The front bezel is divided into two sections:
•
The upper bezel gives access to three 5.25-inch shelves and one
3.5-inch shelf.
•
The lower bezel gives access to the Firewire connector and two USB
connectors. The lower bezel cannot be removed.
To remove the upper bezel:
1. Unclip the two bezel latches located on the left-hand side of the bezel.
See Figure 1-8.
2. Open the bezel slightly and then gently push it outward. See Figure
1-8.
Figu r e 1-8
Rem ovin g th e Bezels
Bezel
Bezel
Latches
26
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
removing and replacing the cover and front bezel
re p la c ing the c ove r a nd front b e ze l
routed.
2. Ensure that the bezel is correctly oriented, align the two plastic bezel
hinges with their bezel slots on the right-hand side of the chassis,
and swing the bezel closed. Confirm that the bezel latches as shown
in Figure 1-8 are seated flat against the chassis.
Figu r e 1-9
In ser tin g th e Bezel Hin ges in to th eir Slots on th e Wor k sta tion
Bezel Hinge
Slots
Bezel Hinges
Chapter 1
27
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
removing and replacing workstation components
3. Insert the flanges located on the bottom edge of the cover into their
slots on the bottom left edge of the workstation. See Figure 1-10.
Next rotate the cover into place as shown by the arrow. You will hear
the cover snap into place when the cover is securely closed.
Figu r e 1-10
Rep la cin g th e Cover
Cover Flanges
Cover Slots
4. Lock the cover using the key provided, if required. Reconnect all the
power and telecommunication cables.
re m oving a nd re p la c ing worksta tion c om p one nts
Instructions for removing and replacing workstation components, such
as the power supply, can be found in the x1100 Technical Reference
located at this web site:
This web site contains a wide range of free information, including
downloadable documentation, service and support options, and the latest
versions of drivers and utilities.
28
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
starting and stopping your Linux workstation
sta rting a nd stop p ing your Linux worksta tion
sta rting your worksta tion for the first tim e
Your Linux workstation has pre-installed Red Hat® Linux and HP
software. It is initialized the first time you start the workstation. The
software initialization process takes a few minutes. Upon start-up, you
will see the screen depicted below. Fill-in the information requested.
For more information on system start-up, configuration and recovery see
the chapter “Linux system setup and recovery.”
Chapter 1
29
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
starting and stopping your Linux workstation
initia lizing your softwa re
NOTE
Do NOT switch OFF the workstation while the software is being
initialized—this could cause unexpected results.
To initialize your software:
1. Turn on the display first, and then turn on the Linux workstation.
2. When the workstation is switched on, it performs a
Power-On-Self-Test (POST). Press Esc if you want to view the POST
details in the HP Summary Screen.
If there is an error in the POST, the error will automatically be
displayed. For details, see the section “if a POST error message is
displayed” in the chapter “troubleshooting your Linux workstation.”
3. If you have set a password in the workstation’s Set-up program, the
password prompt displays after the POST has completed. If the
Password prompt is displayed, type your password and press Enter to
be able to use the workstation.
stop p ing your Linux worksta tion
To stop the workstation (when running an operating system), make sure
that you have exited all application programs and then use the operating
system’s Shutdown command. Then press the On/Off button on the
control panel. If you stop the workstation without following these
instructions, data loss or a damaged file system may result.
30
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
setting hardware passwords in the hp setup program
se tting ha rd wa re p a ssword s in the hp se tup
p rog ra m
You can set hardware passwords to provide different levels of protection
for your workstation: the Administrator password and the User
password. You set these passwords using the Security menu in the Setup
program.
The Administrator can access and change all settings in the Setup
program, while the User can only access and modify certain items in the
Main menu.
to se t a p a ssword
1. Turn on the display and then the workstation. If the workstation is
already turned on, save your data and exit all programs, then restart
the workstation.
2. Press F2 while F2 Setup is displayed at the bottom of the screen. If
you fail to press F2 in time and the start-up process continues, you
will need to restart your workstation so you can press F2.
3. Select the Security menu.
4. Select the Administrator or User password submenu.
5. Choose the Set Administrator or User Password setup item. You
must enter your password twice.
6. To save your changes and exit the Setup program, press Esc or select
Exit Menu, then Exit Saving Changes.
To remove the password, follow the same procedure as to set a password.
You will be asked to enter the existing password first. Then, for the new
password, leave the password field blank and press Enter. To confirm
your choice, press Enter a second time.
Chapter 1
31
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
setting hardware passwords in the hp setup program
if you forg e t your use r p a ssword
1. Switch off the Workstation.
2. Re-start the Workstation. If you are prompted for a password, enter
the Administration password.
3. When Press F2 to Enter Setup appears, press the F2 key.
4. Enter the Administrator password to access the Setup program.
5. Go to the Security menu.
6. Go to the Set User Password field and set a new User Password. This
will replace the old password which you had forgotten.
7. Press Esc or select Exit Menu to save the new password. and exit
Setup.
32
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
viewing your workstation configuration
vie wing your worksta tion c onfig ura tion
The Summary Screen gives you a summary of the current configuration
of your workstation (for example: BIOS version, CPU speed, memory
module size, and installed mass storage devices).
You should check the configuration of your workstation when you first
use it and each time after you install, remove, or upgrade accessories. To
check the configuration:
1. Turn on the display and then the workstation. If the workstation is
already turned on, save your data and exit all programs, then restart
the workstation. Consult your operating system documentation for
any special instructions concerning turning off and restarting your
workstation.
2. Press Esc when the start-up logo appears on your display. This takes
you to the Summary Screen. (To go immediately into the Setup
program, and bypass the Summary Screen, press F2 instead of Esc).
The Summary Screen is displayed for only a short time. Press the
Pause/Break key on the keyboard to retain the Summary Screen
until another key is pressed.
Chapter 1
33
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
configuring your workstation
c onfig uring your worksta tion
Use the Setup program to configure your workstation (for example:
setting up system and user passwords, installing and upgrading mass
storage devices), and to solve configuration problems.
It is recommended that you take note of any changes to the system setup.
sta rting the hp se tup p rog ra m
1. Turn on the display and then the workstation. If the workstation is
already turned on, save your data and exit all programs, then restart
the workstation.
2. Press F2 while F2 Setup is displayed at the bottom of the screen. If
you fail to press F2 in time and the start-up process continues, you
will need to restart your workstation so you can press F2.
The opening screen of the workstation’s Setup program is displayed. The
Main Menu presents a list of fields, for example, the installed BIOS
version or Date and Time.
A band along the top of the screen offers a list of menus. Select a menu
by using either the left or right arrow keys.
m a in m e nu
The Main Menu presents a list of fields, including:
•
•
•
•
•
•
•
•
The installed BIOS version
Reset Configuration Data
System Time
System Date
Key Click
Key Auto-Repeat Speed
Delay Before Auto-Repeat
NumLock at Power-on
By default, “Reset Configuration Data” is set to No. Select Yes to clear the
system configuration data and return to the default settings.
34
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
configuring your workstation
a d va nc e d m e nu
The Advanced Menu offers a list of sub-menus allowing you to:
•
Configure memory caching, USB ports, Integrated I/O Ports and
Integrated Audio Devices
•
•
Enable floppy disk drives, IDE devices (Primary and Secondary)
Configure PCI Devices.
Sub-menus are presented for changing the characteristics and values of
the System Administrator Password, User Password, Power-on
Password, Fixed Disk Boot Sector and for preventing unauthorized
start-up from the Floppy, CD-ROM and IDE-HDD drives (refer to
“setting hardware passwords in the hp setup program” on page 31).
b oot m e nu
Select the order of the devices from which you want the BIOS to attempt
to boot the operating system. The QuickBoot mode option allows the
system to skip certain tests while booting. This decreases the time
needed to boot the system.
p owe r m e nu
The Network Interface option enables the system to return to normal
speed when a specific command is received by the network interface.
Setup changes system behavior by modifying the power-on initialization
parameters. Setting incorrect values may cause system boot failure.
Should this occur, press F9 to load the Setup default values to recover.
Chapter 1
35
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
using power management
using p owe r m a na g e m e nt
Power management enables you to reduce the workstation’s overall
power consumption by slowing down the workstation’s activity when it is
idle. For more information on power consumption data, refer to the
x1100 Technical Reference on HP’s web site at:
Operating systems differ in their power management capabilities. Refer
to your operating system documentation for more information.
softwa re a nd d rive r a va ila b ility
In the “Software and Drivers” section of the HP support site
drivers and BIOS for your workstation.
You can also register to obtain information on new driver availability
automatically.
Contact your dealer for an up-to-date list of supported devices or check
36
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
working in comfort and safety
working in c om fort a nd sa fe ty
p re p a ring your work e nvironm e nt
When using HP computing equipment, it is important that your work
environment contributes to your comfort and productivity:
Figu r e 1-11
You r Wor k En vir on m en t
Document holder
Keyboard
Slope
<15˚
Thigh
Clearance
>6cm
Keyboard Height
64-76 cm
•
•
Work Surface Height. Your work surface should be height adjustable.
To ensure that your work surface is at the correct height, first adjust
the height of your chair so that your feet are firmly on the floor or on
an angled foot rest, then adjust the work surface height until your
forearms are parallel to the floor when you have your fingers on the
keyboard or other input devices.
Chair. Your chair should provide a comfortable sitting position
including features such as a height and tilt adjustment feature,
curved seat edge, a stable base (for example, five legs and castors,
adjustable back support, a freely rotating swivel, fully adjustable
padded arm rests).
•
•
Monitor. Place your monitor so that the top of the screen is at, or
slightly below, eye level (up to 15 degrees).
Work Surface Arrangement. Make sure that all elements of your HP
workstation system for example, monitor, document holder,
keyboard, mice and other input devices, and headphones and
speakers- are optimally arranged and adjusted to meet your personal
Chapter 1
37
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
working in comfort and safety
requirements. For example, if you are primarily using the keyboard,
place it directly in front of you, not to the side. If your work involves
extensive use of a mouse or other pointing device, place that device
directly in front of your left or right arm. If you are using both a
mouse and keyboard, place them both at the same work surface
height and close together. If a palm rest is used, the height should be
flush with the front edge of the keyboard. Other items, such as your
telephone or notepad, should also be considered.
CAUTION
Various aspects of using mice, keyboards and other input devices may
increase your risk of discomfort or injury. Optimize your comfort and
safety by positioning these devices properly.
your work p osture
Sitting in one position for long periods can be uncomfortable. To
minimize the potential risk for physical discomfort or injury, it’s
important that you maintain a proper posture.
•
•
•
Head. When viewing your monitor, your head should not be tilted
more than 15 degrees forward, and do not turn your head toward
either side.
Back. While sitting at your work surface, make sure your back is
supported by the chair's backrest in an erect position or angled
slightly backwards.
Arms. Make sure your arms and elbows are relaxed and loose, with
your upper arms perpendicular to the floor or tilted downward not
more than 15 degrees. Keep your forearms and hands approximately
parallel with the floor with elbows bent between 70 and 115 degrees.
Keep your elbows close to your sides (less than 20 degrees away from
your body).
•
•
Hands, Wrists, Forearms. Try to keep your hands wrists and
forearms in a relaxed neutral position when using your mouse
keyboard or other input devices. For example, while using your
keyboard and mouse, rest your forearms (flat) on your desktop.
Legs. Your thighs should be horizontal or angled slightly downward.
Your lower legs should be near a right angle to your thighs. Make
sure there is sufficient room under the work surface for your legs.
38
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
working in comfort and safety
•
Feet. If after adjusting your chair you cannot rest your feet
comfortably on the floor, use a footrest, preferably one that can be
adjusted in height and angle.
a d d itiona l e rg onom ic issue s
•
Look away from the screen from time-to-time to help reduce
eyestrain. Focus on distant objects briefly, and blink periodically to
lubricate your eyes. You also should have your eyes checked on a
regular basis and ensure your eyeglass prescription is suitable for
working on a computer monitor.
•
Remember to occasionally shift position and move your body.
Keeping your body in one position for long periods is unnatural and
stressful. When prolonged work is required, take frequent short
breaks. As a rule of thumb, a five or ten minute break every hour is a
good idea. Short frequent breaks are more beneficial than longer less
frequent breaks. Data show that people who work for long periods of
time without a break may be more prone to ergonomic injury.
•
•
Changing tasks frequently will help prevent muscle stiffness.
Examples: alternating between keyboarding, reading, writing, filing,
and moving around in your work environment, helps you maintain a
relaxed posture. Occasionally stretch the muscles in your hands,
arms, shoulders, neck and back. You should stretch at least as often
as you take brief task breaks — at least once every hour.
Discomfort may be alleviated by using alternative ergonomic designs
and accessories such as ergonomically personalized chairs, palm
rests, keyboard trays, alternative input devices, prescription
eyeglasses, anti-glare screens, and more. Seek additional information
from the sources available to you, including your employer, doctor,
local office supply store, and the Information Sources listed in the
online version of Working in Comfort, preloaded on the hard disk of
your HP computing equipment or available on the HP web site:
Chapter 1
39
Download from Www.Somanuals.com. All Manuals Search And Download.
setting up and using your workstation
additional system information and help
a d d itiona l syste m inform a tion a nd he lp
After completing the Set-up program and rebooting you workstation, you
can launch the Netscape web browser by clicking on its icon at the
bottom of your display. Your browser will display a “Welcome” web page
(see above) that provides access to several on-line documents and
manuals. This web page will also guide you to additional information
regarding the Red Hat® and HP software.
40
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
c onfig uring your Linux worksta tion
Make sure there are no disks in the 3.5-inch floppy drive or the CD-ROM
drive, then turn on the power switch. As the workstation boots, it
describes what is happening with messages on the screen. You do not
need to respond to any messages you see. The start-up process is
completely automatic.
The Linux Setup Tool is run the first time the workstation is booted. It
allows you to set up important functionality of your workstation before
you login. These areas of functionality are: networking, the X Server,
timezone, system time, root password, and keyboard language. These
areas will be discussed in more detail below.
NOTE
You cannot re-run the Linux Setup Tool.
After a few minutes, the start-up process ends and the Linux Setup Tool
window, shown below, appears. You can choose from the tabs at the top of
the screen to select the various areas of functionality.
42
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
se tting the root p a ssword (re q uire d )
By default, the root user has the password “hplinux.” Before you exit, you
must set your own root password. The Linux Setup Tool enforces this.
Click on the “Root Password” tab at the top of the Setup Tool window.
This brings up the window shown below.
Choose a password, according to the directions in the window, and type it
in the “Enter root password” box. Asterisks appear in the box, instead of
what you type. Type your password again in the “Enter password again”
box. Once you have completed setting the functionality for this tab, you
can go to the next tab.
CAUTION
NOTE
Do not click on the Save button until you have setup all workstation
functionality as this will exit you from the Linux Setup Tool.
Write your password down and keep it in a secure place. If you forget it,
you will not be able to log in to your workstation.
Chapter 2
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
c ha ng ing b oot/ ne twork p a ra m e te rs
Choose the “Boot/Network” tab and the window below appears.
There are three kinds of booting protocols that setparms can set up for
you: Static, DHCP, and BOOTP. Choose the appropriate protocol based
on the following descriptions:
1. Static boot protocol
If you choose Static booting, you will have to set several networking
parameters. Some of these are described below.
You will also need to provide an IP address for your workstation, a
hostname, the IP address of the network gateway for your system,
the netmask (255.255.248.0 for example), and a network domain
name (for example, company_name.com).
Press the “DNS Parameters” tab to set up your DNS Configuration.
Refer to the section “DNS Parameters Configuration” in this chapter
for an example of the screen interface and instructions.
After setting up DNS, click on the “Authorization Parameters” tab
and follow the instructions in the section “setting up network
authorization parameters.”
44
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
Files that are modified with these network changes are:
/etc/resolv.conf
/etc/sysconfig/network
/etc/sysconfig/network-scripts/ifcfg-eth0
2. DHCP boot protocol
If you choose DHCP booting, your IP address, hostname, gateway,
netmask, domain name, and DNS server information are all set up
for you at boot time. It should also set up your NIS information.
However, the current DHCP client-side implementation from Red
Hat does not request this from the server, so you will have to set that
up yourself if you use it. See the Sections “Setting Up Network
Authorization Parameters” and “DNS Parameters Configuration” in
this Chapter.
The file /etc/sysconfig/network-scripts/ifcfg-eth0 is modified
when you select DHCP.
3. BOOTP boot protocol
BOOTP is a subset of DHCP and will not be fully described here. It
gets your IP address, hostname, gateway and netmask, but does not
set up your DNS server information or NIS authentication, so you
will have to do that yourself.
The file /etc/sysconfig/network-scripts/ifcfg-eth0 is modified
when you select BOOTP.
Choose the Boot Protocol that is appropriate for your system. If you do
not know which protocol to choose, ask your system administrator. The
following instructions assume you are using the Static protocol.
Once you have completed setting the functionality for this tab, you can
go to the next tab.
CAUTION
Do not click on the Save button until you have setup all workstation
functionality as this will exit you from the Linux Setup Tool.
Chapter 2
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
se tting up ne twork a uthoriza tion p a ra m e te rs
After typing your workstation’s IP Address, Hostname, network
Gateway, Netmask addresses and the Domain Name in the appropriate
spaces, click on the tab “Authorization Parameters.”
Here is where you enable Network Information Service (NIS), set up its
parameters and other authentication parameters. If you choose to enable
NIS, you will need to enter its domain name (see your network admin for
more help), and optionally enter its server IP address or request it via
broadcast.
Check the “Use Shadow Passwords” and “Enable MD5 Passwords” boxes
if appropriate. Once you have completed setting the functionality for this
tab, you can go to the next tab.
CAUTION
Do not click on the Save button until you have setup all workstation
functionality as this will exit you from the Linux Setup Tool.
Click “Cancel” if you want to skip this step.
46
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
The files:
/etc/yp.conf
/etc/shadow
/etc/pam.d/passwd
are modified with this step.
Xse rve r p a ra m e te rs
To set Monitor and Video parameters, use the “Xserver” tab at the top of
the Setup Tool window. The Xserver window (see below) allows you to
choose monitor manufacturer/type, video modes and which Default
Window Manager to use.
Follow the directions on the screen. Once you have completed setting the
functionality for this tab, you can go to the next tab.
CAUTION
Do not click on the Save button until you have setup all workstation
functionality as this will exit you from the Linux Setup Tool.
Chapter 2
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
d om a in na m e se rve r (DNS) p a ra m e te rs c onfig ura tion
In the “Boot/Network Parameters” tab, choose the “DNS Parameters” tab
to configure your DNS connections
The window contains two smaller windows DNS Servers (IP Address)
and DNS Search Domains. Below the left window, in the “Server:” box,
type the network Domain Name Server address. Click the Add button
below the small window to place this address in the larger window. If
there is more than one domain name server, you may keep adding
addresses until you have added them all. The first one will be your
primary DNS. Below the right window, in the “Domain:” box, type the
domain name and click the Add button below that window. If there is
more than one, enter them all.
To change or remove an address, click on it to select it, and click on the
Modify or Remove button below it.
Once you have completed setting the functionality for the “Boot/Network
Parameters” tab, you can go to the next tab.
48
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
CAUTION
Do not click on the Save button until you have setup all workstation
functionality as this will exit you from the Linux Setup Tool.
syste m tim e , tim e zone a nd d a te p a ra m e te rs
The “Time/Timezone” tab at the top of the Setup Tool screen will display
the window shown below which is used for setting your system time and
date. In the “Time:” box, you may type the current time using the
24-hour clock. In the “Day:” box, you may type the current day of the
month. Pull down the “Month:” menu to select the current month. In the
“Year:” box, you may type the year.
tim e zone
Click the “Geographical Location” button at the top of the window to
select your location, if it is not “U.S.” Use the scroll bar to show your
city/time zone, then click on it.
This step creates
a
symbolic link from /etc/localtime to
/usr/share/zoneinfo/<timezone>.
Chapter 2
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
Selecting the “Set time on Save” option causes the Linux Setup Tool to
set and save the system clock and the hardware clock with the time and
date specified in the “Time” and date fields. If you do not select that
option, they will remain set to their current value.
Once you have completed setting the functionality for this tab, you can
go to the next tab.
CAUTION
Do not click on the Save button until you have setup all workstation
functionality as this will exit you from the Linux Setup Tool.
se tting ke yb oa rd la ng ua g e (re q uire d )
The “Keyboard Mapping” functionality currently supports five keyboard
languages: U.S., U.K., French, German and Spanish. U.S. is the default.
As soon as you click “Set Now” in this window, the keyboard language is
set and the keyboard is re-mapped, but only for the time you are in Linux
Setup Tool.
50
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
This step modifies the files:
/etc/sysconfig/keyboard
/etc/sysconfig/i18n
Once you have completed setting the functionality for this tab, you can
go to the next tab.
CAUTION
Do not click on the Save button until you have setup all workstation
functionality as this will exit you from the Linux Setup Tool.
Chapter 2
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
Ne tsc a p e p re fe re nc e s
The “Netscape” tab at the top of the Setup Tool window allows you to
set-up your Netscape Proxy Configuration parameters, home page URL
and whether you want direct connection to the Internet (see below).
Fill-in the required information. Once you have completed setting the
functionality for this tab, you can go to the next tab.
CAUTION
Do not click on the Save button until you have setup all workstation
functionality as this will exit you from the Linux Setup Tool.
52
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
configuring your Linux workstation
sum m a ry
This completes the miscellaneous parameters you can set from the Linux
Setup Tool window. If you want to erase the changes you have made and
keep the current configuration settings, click on the “Reset
Configuration” button. To see the parameters you have chosen, click on
the “Show Summary” button.
The “Show Summary” window, shown below, contains all the information
you entered. Click the OK button to exit the “Show Summary” window.
If you need to make changes to any of the parameters listed in the “Show
Summary” window, click on the appropriate functionality tab for that
parameter and make the changes. Once you have all the parameters set
to the values you need, you can click on the Save button to complete the
setting of these changes.
NOTE
The system will not let you exit until you have set the root password.
Chapter 2
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
recovering your Linux system
re c ove ring your Linux syste m
This section will provide information on how to recover your Linux
system should it be required.
the Linux re sc ue m od e
The Linux Rescue Mode is a Linux environment that lets you access files
on your HP Visualize Linux workstation when you cannot actually run
Linux. You may be unable to run Linux because it will not boot or you
have had a hardware or software failure.
Linux may not boot if you have installed another operating system. Some
operating systems assume that you have no other operating systems on
your computer. When such an operating system is installed, it overwrites
the Master Boot Record that contained the Linux LILO bootloader. If this
happens, Linux will not boot.
Any computer can experience a hardware or software failure for many
reasons. With the HP Visualize Linux workstation, it might happen
because of problems with a hard drive or because LILO was not run after
building a new kernel.
Rescue Mode can give you access to the system so you can try to solve the
problem or, at least, make copies of important files.
b ooting your syste m in re sc ue m od e
To boot your system in Rescue Mode, enter the following parameter at
the installation boot prompt:
boot: linux rescue
You can get to the installation boot prompt in one of these ways:
1. By booting your system from the diskette or CD-ROM that came with
your Red Hat Linux boxed set.
2. By booting from a network or PCMCIA boot diskette. These methods
assume your network connection is working and require you to
identify the network host and transfer type.
Once you have your system in rescue mode, a prompt appears:
bash#
54
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
recovering your Linux system
From this prompt, you can use the following commands:
Ta ble 2-1
Lin u x Com m a n d s
ps
anaconda
badblocks
bash
gzip
mke2fs.ext2
mknod
head
python
python1.5
raidstart
raidstop
rcp
hwclock
ifconfig
init
mkraid
mkswap
mlabel
mmd
cat
chatter
chmod
chroot
clock
collage
cp
insmod
less
mmount
mmove
rlogin
rm
ln
loader
ls
rmmod
route
rpm
modprobe
mount
cpio
lsattr
lsmod
mattrib
mpartition
mrd
dd
rsh
ddcprobe
depmode
df
mread
sed
mbadblocks mren
sh
mcd
mshowfat
sync
e2fsck
fdisk
fsck
mcopy
mdel
mt
tac
mtools
mtype
mv
tail
mdeltree
mdir
tar
fsck.ext2
ftp
touch
traceroute
umount
uncpio
uniq
mdu
mzip
open
pico
ping
genhdlist
mformat
gnome-pty-helper minfo
grep mkdir
Chapter 2
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux system setup and recovery
recovering your Linux system
Ta ble 2-1
Lin u x Com m a n d s (Con tin u ed )
probe
zcat
gunzip
mke2fs
NOTE
The mancommand is not available in rescue mode. Make sure you know
how to use all the above commands before you use rescue mode.
If your root file system is undamaged, you can mount it and then run any
standard Linux utility. For example, suppose your root file system is in
/dev/hda5. Here is how to mount this partition:
mount -t ext2 /dev/hda5 /foo
Where /foois a directory that you have created.
Now you can run man and other utilities. At this point, you are running
Linux in single-user mode.
If you do not know the names of your Linux partitions, you can guess;
mounting non-existent partitions will do no harm.
b ooting sing le use r m od e d ire c tly
You may be able to boot single-user mode directly. If your system boots,
but does not allow you to login when it has completed booting, try
rebooting and specifying one of these options at the LILO boot prompt:
LILO boot: linux single
LILO boot: linux emergency
In single-user mode, you computer boots to run level 1. Your local file
systems will be mounted but your network will not be activated. You get
a usable system maintenance shell.
In emergency mode, you are booted into the most minimal environment
possible. The root file system will be mounted read-only and almost
nothing will be set up. The main advantage of this over Linux single user
is that your initfiles are not loaded. If initis corrupted or not working,
you can still mount file systems to recover data that could be lost during
a re-installation.
56
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your workstation
screen is blank because the system failed to boot
sc re e n is b la nk b e c a use the syste m fa ile d to b oot
Your workstation’s operating system will fail to boot if the line voltage
switch is set to 230V and AC line voltage is 115V.
To solve this problem:
1. Place the workstation so that you are looking at the back of it.
2. Use a small thin bladed screwdriver to slide the workstation’s line
voltage switch to the left until you see 115 in the right opening of the
switch. See Figure 3-1.
Figu r e 3-1
Settin g th e Wor k sta tion ’s Lin e Volta ge Sw itch
Slide switch to left to get 115V
Slide switch to right to get 230V
Line
Voltage
Switch
Power Plug
Connector
CAUTION
Care must be taken to ensure that the line voltage switch is set correctly.
Failure to do this could destroy the power supply if the line voltage
switch is set to 115V and AC line voltage is 230V.
58
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your workstation
solving hardware problems
solving ha rd wa re p rob le m s
This table gives basic troubleshooting tips. For more in-depth
information, see the section “hp Diagtools hardware diagnostics” in this
manual.
Ta ble 3-1
You r Wor k sta tion Does Not Sta r t P r op er ly
Th e Wor k sta tion d oesn ’t p ow er on .
Make sure...
How
The workstation’s power cord is
properly connected.
Connect the power cord to a
working power outlet and to the
rear of the workstation.
Th er e is a bu zzin g n oise.
A beep code when the workstation starts up means that there is a
configuration problem.
Make sure...
How
This is the pre-boot diagnostics
capability feature. It detects
after the buzzer (refer to the
section “pre-boot diagnostics
audio signal” in this chapter).
2. Contact HP Support (refer to
page 68).
If you still have a problem, run HP e-Diagtools or Diagtools (refer to
page 65).
There is no image during boot and the screen is blank.
Make sure...
How
The line voltage switch, located
on the back of your workstation,
is set to 115.
See the section “screen is blank
because the system failed to boot”
in this chapter.
If the Workstation starts and you still have a problem, run HP
e-Diagtools (refer to page 65).
Chapter 3
59
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your workstation
solving hardware problems
Ta ble 3-2
You r Wor k sta tion Ha s a Ha r d w a r e P r oblem
Th e k eyboa r d d oesn ’t w or k .
Make sure...
How
The keyboard cable is correctly
connected.
Plug the cable into the correct
connector on the back of the
workstation. Color coding is used
for easy matching.
The keyboard is free of debris.
Check all keys are at the same
height, and none are stuck down.
The keyboard itself is not
defective.
Either replace the keyboard by a
known working unit or try the
keyboard with another
workstation.
You are using the correct driver.
The correct driver is pre-installed
on all Linux systems. For other
operating systems, refer to your
operating system’s
Download the latest driver from
HP’s Web at:
documentation.
You are using the latest BIOS.
Download the latest BIOS from
HP’s Web at:
Th e m on itor d oesn ’t w or k .
The workstation’s power indicator light works but the monitor
remains blank
Make sure...
How
The monitor is switched ON (LED Refer to the monitor manual for
is on).
an explanation of the LED
signals (green, orange, or
blinking).
The monitor’s power cord is
correctly connected.
Connect the power cord – ensure
it is plugged into a working
grounded power outlet and into
the monitor.
60
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your workstation
solving hardware problems
Ta ble 3-2
You r Wor k sta tion Ha s a Ha r d w a r e P r oblem (Con tin u ed )
The graphics card is installed and
the monitor (video) cable is
correctly connected.
Connect the monitor (video) cable
– ensure it is properly connected
to both the workstation and the
monitor. Ensure that the cable is
connected to the graphics card’s
connector.
The monitor’s brightness and
Check the settings using the
contrast settings are correctly set. monitor’s OSD (on-screen
display) or using controls on the
front of the monitor.
There is an image during boot but then the screen goes blank.
Make sure...
How
The monitor settings in your
Workstation are compatible with
your monitor.
Switch to a text console by
pressing Ctrl-Alt-F1. Log in as
root and check that the “Monitor”
section of your X server
configuration file
(/etc/X11/XF86Config-4) properly
matches the specifications of your
monitor.
If the Workstation starts and you still have a problem, run HP
e-Diagtools (refer to page 65).
Th e m ou se d oesn ’t w or k .
Make sure...
How
1. Switch off the workstation
The mouse cable is correctly
connected.
(not necessary with a USB
mouse).
2. Plug the cable into the correct
connector on the back of the
workstation (color coding is
used for easy matching).
3. Switch on the workstation.
Chapter 3
61
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your workstation
solving hardware problems
Ta ble 3-2
You r Wor k sta tion Ha s a Ha r d w a r e P r oblem (Con tin u ed )
You are using the correct driver. If Download the latest driver from
you are using HP’s enhanced
mouse, ensure that the correct
driver is installed. This driver is
provided with all Linux systems.
HP’s Web at:
You are using the latest BIOS
Download the latest BIOS from
HP’s Web at:
The mouse is clean.
Clean the mouse ball as shown
below.
The mouse itself is not defective.
Replace the mouse with a unit
that is known to work or try the
mouse with another workstation.
If the workstation starts but you still have a problem, run HP
e-Diagtools (refer to page 65).
You r Wor k sta tion h a s n o sou n d .
Check that...
How
The lime green
Either disconnect the lime green
connector to activate the internal
speaker or plug-in headphones or
speaker into the keyboard.
Speaker/Headphone connector is
plugged into the multi-media
keyboard.
62
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your workstation
solving hardware problems
troub le shooting tip s:
•
•
Restart your workstation and see if the problem recurs.
Run HP e-Diagtools. You can create a hardware profile of your
Workstation (Support Ticket) that can be faxed or mailed to support.
Refer to this section for more information on using e-Diagtools.
•
•
see if you are experiencing a known problem.
Update your Workstation’s BIOS. The latest BIOS for your
Workstation and instructions on updating the BIOS are available
•
•
•
•
Record the details of the problem so that you can describe it
accurately.
Think of anything you may have done recently before you first
experienced the problem.
If possible, have your system up and running and close by when you
call HP Support.
We recommend you contact your HP dealer, or contact HP Support
outside of peak times (mid-morning and week day in the early
evenings).
if you lose the ke y
If you lose the key to the workstation, you must order a replacement lock
(HP Part Number 5064-9154) from the HP dealer or HP Sales and
Service Office. The new lock is delivered with two keys. Contact your HP
dealer for installing the new lock.
ne e d m ore he lp ?
For more detailed help refer to the x1100 Technical Reference which is
available on HP’s support web site at:
Chapter 3
63
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your workstation
pre-boot diagnostics audio signal
p re -b oot d ia g nostic s a ud io sig na l
When your workstation starts up, the BIOS performs Pre-Boot
Diagnostics to test your hardware configuration for any problems. If a
problem is detected during pre-boot, the Pre-Boot Diagnostics will emit
an audio signal through the workstation’s internal speaker.
The Pre-Boot Diagnostics emits an audio sequence with two kinds of
sounds. The first is an unusual series of tones that indicate an anomaly
has been detected. This series of sounds also contains an electronic
signal that can be sent through a telephone line to an authorized help
desk or HP Support, if necessary. This signal cannot be interpreted by
the human ear. However, it can be decoded by help desk equipment to
extract the workstation model and serial number.
The second type of sound is a series of long beeps that indicate a
particular error. If you hear a series of beeps, you should count them as
this will help you detect the cause of the problem.
Nu m ber
of Beep s
Mea n in g
1
2
3
4
5
6
7
Processor absent, not correctly connected or ZIF socket not closed
Power supply is in protected mode
No memory, bad memory modules, incompatible memory module
Graphics card problem
PnP/Workstation initialization problem
Corrupted BIOS. You need to activate crisis recovery procedure
Defective system board
Please note that Memory (code 3), Video Card (code 4), and
PnP/workstation (code 5) errors will only be heard after a 15-second
delay.
if you m iss the b e e p c od e
If you miss the beep code, turn off the workstation by pressing the on/off
power button for five seconds or more, then listen for the signal again.
64
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your workstation
hp Diagtools hardware diagnostics
hp Dia g tools ha rd wa re d ia g nostic s
NOTE
Run e-Diagtools before contacting HP for Warranty service. This is to
obtain information that will be requested by a Support Agent.
Your hard disk includes a hardware diagnostic partition containing
either HP Diagtools or HP e-Diagtools hardware diagnostic utilities.
These may be used to diagnose hardware-related problems on your HP
workstation. Do NOT delete this partition.
With this utility you can:
•
Check the hardware configuration and verify that it is functioning
correctly.
•
•
•
•
Test individual hardware components.
Diagnose hardware-related problems.
Obtain a complete hardware configuration.
Provide precise information to an HP support agent so they can solve
problems quickly and effectively.
For more information about this utility, refer to the x1100 Technical
Reference, available on the HP web site at:
ob ta ining e -Dia g tools
HP e-Diagtools is supplied on the following:
•
The Utility Partition pre-installed on your hard disk drive
(recommended)
•
The CD-ROM that came with your Workstation:
— Recovery CD-ROM for x1100 Workstations
•
Chapter 3
65
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your workstation
hp Diagtools hardware diagnostics
sta rting e -Dia g tools from the utility p a rtition
NOTE
This method will only work if the diagnostics partition on your hard disk
drive is intact.
1. Restart your workstation and select “diagtools” from the “LILO
menu.”
2. In the menu, select the option to run e-Diagtools hardware
diagnostics.
sta rting e -Dia g tools from the CD-ROM
1. Insert the e-Diagtools CD-ROM in the CD-ROM drive.
2. Restart the workstation.
3. Select the option to run the hardware diagnostics.
NOTE
If you are unable to boot from your CD-ROM drive, restart your
workstation and press F2 to enter HP’s Setup program. Check the Boot
device settings to ensure that your workstation can boot from the
CD-ROM.
running hp e -Dia g Tools
Make sure:
•
The workstation model must match the CD-ROM (the CD-ROM is
locked to a specific workstation model).
•
CD-ROM drive has been configured to boot before the hard disk
drive.
66
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your workstation
hp Diagtools hardware diagnostics
p rod uc ing a sup p ort tic ke t
To produce a complete record of your system’s configuration and test
results, you will need to create a Support Ticket. This is a simple text file
that contains essential information and is designed to assist your local or
HP Support Agent.
If you are using HP e-Diagtools from the hard disk drive and your
workstation is connected to a LAN using TCP/IP (Internet) protocols, you
have the option of e-mailing your Support Ticket from within
e-Diagtools.
If you are using HP e-Diagtools from a CD-ROM, you can create the
Support Ticket file on either the hard disk drive or floppy disk drive.
You can also view the Support Ticket file using the “Support Ticket
Viewer” program.
The Support Ticket file can be easily sent, via e-mail or fax.
Chapter 3
67
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your workstation
hp customer care center phone numbers
hp c ustom e r c a re c e nte r p hone num b e rs
HP Customer Care Centers can help you solve issues related to HP
products and, if necessary, initiate appropriate service procedures. In the
U.S.A, telephone support is available 24 hours a day, 7 days a week.
Elsewhere, it is available during normal office hours. Here is the URL for
HP Customer Care Center phone numbers:
68
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
Decla r a tion of Con for m ity
according to ISO/IEC Guide 22 and EN 45014
Ma n u fa ctu r er :
Hewlett-Packard Company
3404 East Harmony Rd.
Fort Collins, CO 80528
USA
Decla r es th a t th e:
P r od u ct Na m e:
HP Workstation
Mod el Nu m ber s:
System Nu m ber :
Mod el Nu m ber s:
System Nu m ber :
Ba se P r od u ct Nu m ber :
P r od u ct Op tion s:
A7777A, A7778A, A7779A, A7780A, A7882A, A7883A, A7884A
x1000 is the System Number for the previous seven Model Numbers
A7863A, A7864A, A7865A, A7866A, A7867A
x1100 is the System Number for the previous five Model Numbers
x1000 and 5X150
all
con for m s to th e follow in g sp ecifica tion s:
Safety
IEC 950:1991+A1+A2+A3+A4+A11/EN 60950:1992+A1+A2+A3+A4
IEC 60825-1:1993/EN60825-1:1994+A11 Class 1 for LEDs
USA 21CFR Subpart J – for FC Laser module
China GB4943-1995
Russia GOST R 50377-92
EMC
CISPR 22: 1997 / EN 55022: 1998 Class A
CISPR 24: 1997 / EN 55024: 1998
IEC 61000-3-2: 2000 / EN 61000-3-2: 1995
IEC 61000-3-3: 1994 / EN 61000-3-2: 1995
U.S. FCC Part 15, Class A
Japan VCCI Class A
Australia/New Zealand AS/NZS 2046.1/2:1992, AS/NZS 3548:1995
China GB9254-1988
Taiwan CNS 13438 Class A
Russia GOST R 51318.22-99
a n d is cer tified by:
UL Listed to UL1950, 2nd edition, File E146385
cUL Listed to CSA 22.2 No. 950-M93
TUV Certified to EN60950 2nd edition with A1+A2+A3+A4
HP Fort Collins CCQD HTC
su p p lem en ta r y in for m a tion :
The product herewith complies with the requirements of the following Directives and carries the CE marking
accordingly:
- the EMC directive 89/336/EEC and 92/31/EEC and 93/68/EEC
- the Low Voltage Directive 73/23/EEC and 93/68/EEC
This product was tested in a typical Hewlett-Packard workstation configuration.
For Compliance Information ONLY, contact: European Contact: Your local Hewlett-Packard Sales and Service
Office or Hewlett-Packard GmbH, Dept. HQ-TRE Standards Europe, Herrenberger Strasse 130 Boeblingen
(FAX: +49-7031-14-3143)
Americas Contact: Hewlett-Packard, Fort Collins Site Quality Mgr., Mail Stop 64, 3404 E. Harmony Road,
Fort Collins, CO 80528, U.S.A.
70
Appendix A
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
regulatory information
re g ula tory inform a tion
FCC (for USA only)
Federal Communications Commission Radio Frequency Interference Statement
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules and the
Canadian Department of Communications. These limits are designed to
provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
Hewlett-Packard’s FCC Compliance Tests were conducted with
HP-supported peripheral devices and HP shielded cables, such as those
you receive with your system. Changes or modifications not expressly
approved by Hewlett-Packard could void the user’s authority to operate
the equipment.
notic e for Ca na d a
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la Class A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
sa fe ty wa rning for the USA a nd Ca na d a
If the power cord is not supplied with the computer, select the proper
power cord according to your local national electric code.
USA: use a UL listed type SVT detachable power cord.
Canada: use a CSA certified detachable power cord.
For your safety, never remove the Workstation’s cover without first
removing the power cord and any connection to a telecommunication
network. Always replace the cover before switching on again.
Appendix A
71
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
regulatory information
Si le cordon secteur n’est pas livré avec votre ordinateur, utiliser un
cordon secteur en accord avec votre code electrique national.
USA: utiliser un cordon secteur “UL listed,” de type SVT.
Canada: utiliser un cordon secteur certifié CSA.
Pour votre sécurité, ne jamais retirer le capot de l’ordinateur sans avoir
préalablement débranché le cordon secteur et toute connection à un
réseau de télecommunication. N’oubliez pas de replacer le capot avant de
rebrancher le cordon secteur.
notic e for the Ne the rla nd s
Bij dit apparaat zijn batterijen geleverd. Wanneer deze leeg zijn, moet U
ze niet weggooien maar inleveren als KCA.
notic e for Ge rm a ny
Wenn die Batterie nicht korrekt eingebaut wird, besteht
Explosionsgefahr. Zu ihrer eigenen Sicherheit sollten Sie nicht
versuchen, die Batterie wiederaufzuladen, zu zerlegen oder die alte
Batterie zu verbrennen. Tauschen Sie die Batterie nur gegen den
gleichen oder ähnlichen Typ aus, der vom Hersteller empfohlen wird. Bei
der in diesem PC intergrierten Batterie handelts sich um eine
Lithium-Batterie, die keine Schwermetalle enthält. Batterien und
Akkumulatoren gehören nicht in den Hausmüll. Sie verden vom
Hersteller,
Händler
oder
deren
Beauftragten
kostenlos
zurückgenommen, um sie einer Verwertung bzw. Entsorgung
zuzuführen.
noise d e c la ra tion for Ge rm a ny
Lärmangabe nach Maschinenlärmverordnung - 3 GSGV (Deutschland)
LpA < 70 db am Arbeitsplatz normaler Betrieb nach EN27779: 11.92.
notic e for Ja p a n (Cla ss A)
72
Appendix A
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
regulatory information
notic e for Kore a
notic e for Tra d itiona l Chine se
Appendix A
73
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
hp hardware warranty
hp ha rd wa re wa rra nty
Important: This is your hardware product warranty statement. Please,
read it carefully.
Warranty terms may be different in your country. If so, your Authorized
HP Dealer or Hewlett-Packard Sales and Service Office can give you
details.
HP products may contain remanufactured parts equivalent to new in
performance or may have been subject to incidental use.
HP products external to the system processor unit —such as external
storage subsystems, displays, printers, and other peripherals— are
covered by the applicable warranties for those products; HP software is
covered by the HP Software Product Limited Warranty
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW
ZEALAND: THE WARRANTY TERMS CONTAINED IN THIS
STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED,
DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION
TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE
SALE OF THIS PRODUCT TO YOU.
thre e ye a r lim ite d ha rd wa re wa rra nty
Hewlett-Packard (HP) warrants this hardware product against defects in
materials and workmanship for a period of three years from receipt by
the original end-user purchaser.
The three year warranty includes on-site service during the first year of
use (free parts and labor), and parts service provided by an HP Service
Center or a participating Authorized HP Computer Dealer Repair
Center, during the second and third years of use.
If HP receives notice of above defined defects during the warranty period,
HP will either, at its option, repair or replace products, which prove to be
defective.
Should HP be unable to repair or replace the product within a reasonable
amount of time, the customer's alternate exclusive remedy shall be a
refund of the purchase price upon return of the product.
74
Appendix A
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
hp hardware warranty
The system processor unit, keyboard, mouse, and Hewlett-Packard
accessories inside the system processor unit —such as video adapters,
mass storage devices, and interface controllers— are covered by this
warranty.
This warranty is extended worldwide under certain conditions (please
check with your local HP office) to products purchased from HP or an
Authorized HP Computer Dealer which are reshipped by the original
purchaser either for use by the original purchaser or provided as an
incidental part of systems integrated by the original purchaser. When
available in the country of use, service is provided in the same manner as
if the product was purchased in that country and can only be provided in
countries where the product is designed to operate. If the product is not
normally sold by HP in the country of use, it must be returned to the
country of purchase for service. Response time for on-site service, and
parts delivery turn-around time for parts service, are subject to changes
from standard conditions based upon non-local parts availability.
lim ita tion of wa rra nty
The above warranty shall not apply to defects resulting from: misuse;
unauthorized modification; operation or storage outside the
environmental specifications for the product; in-transit damage;
improper maintenance; or defects resulting from use of non-HP software,
accessories, media, supplies, consumables, or such items not designed for
use with the product.
Reloading the bundled or pre-loaded software on your Workstation is not
covered by the HP warranty.
HP MAKES NO OTHER EXPRESS WARRANTY, WHETHER
WRITTEN OR ORAL, WITH RESPECT TO THIS PRODUCT. ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS IS
LIMITED TO THE THREE-YEAR DURATION OF THIS WRITTEN
WARRANTY. SOME STATES OR PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU.
This warranty gives you specific legal rights, and you may also have
other rights, which vary, from state to state, or province to province.
Appendix A
75
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
hp hardware warranty
lim ita tion of lia b ility a nd re m e d ie s
THE REMEDIES PROVIDED ABOVE ARE THE CUSTOMER'S SOLE
AND EXCLUSIVE REMEDIES. IN NO EVENT SHALL HP BE LIABLE
FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, WHETHER BASED ON WARRANTY,
CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.
The foregoing limitation of liability shall not apply in the event that any
HP product sold hereunder is determined by a court of competent
jurisdiction to be defective and to have directly caused bodily injury,
death, or property damage; provided, that in no event shall HP's liability
for property damage exceed the greater of $50,000 or the purchase price
of the specific product that caused such damage.
Some states or provinces do not allow the exclusion or limitation of
incidental or consequential damages —including lost profit— so the
above limitation or exclusion may not apply to you.
ob ta ining on-site wa rra nty se rvic e
To obtain on-site warranty service, the customer must contact an HP
Sales and Service Office (in the US, call the HP Customer Support
Center at (970) 635-1000) or a participating Authorized HP Computer
Dealer Repair Center. The customer must be prepared to supply proof of
the purchase date.
The system processor unit, keyboard, mouse, and Hewlett-Packard
accessories inside the system processor unit —such as video adapters,
mass storage devices, and interface controllers— are covered by this
warranty.
During the on-site warranty period, customer-replaceable components
may be serviced through expedited part shipment. In this event, HP will
prepay shipping charges, duty, and taxes; provide telephone assistance
on replacement of the component when necessary; and pay shipping
charges, duty, and taxes for any part that HP asks to be returned.
On-site visits caused by non-Hewlett-Packard products —whether
internal or external to the system processor unit— are subject to
standard per-incident travel and labor charges.
76
Appendix A
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
hp hardware warranty
On-site service for this product is restricted or unavailable in certain
locations. In HP Excluded Travel Areas— areas where geographical
obstacles, undeveloped roads, or unsuitable public transportation
prohibit routine travel— service is provided on a negotiated basis at
extra charge.
Response time for HP on-site service in an HP Service Travel Area is
normally next business day (excluding HP holidays) for HP Travel Zones
1-3 (generally 100 miles or 160 Km from the HP office). Response time is
second business day for Zones 4 and 5 (200 miles, 320 Km); third
business day for Zone 6 (300 miles, 480 Km); and negotiated beyond Zone
6. Worldwide Customer Support Travel information is available from any
HP Sales and Service Office.
Travel restrictions and response time for dealer or distributor service are
defined by the participating dealer or distributor.
Service contracts which provide after-hour or weekend coverage, faster
response time, or service in an Excluded Travel Area are often available
from HP, an authorized dealer, or authorized distributor at additional
charge.
c ustom e r re sp onsib ilitie s
The customer may be required to run HP-supplied diagnostic programs
before an on-site visit or replacement part will be dispatched.
The customer is responsible for the security of its proprietary and
confidential information and for maintaining a procedure external to the
products for reconstruction of lost or altered files, data, or programs.
The customer must provide: access to the product; adequate working
space and facilities within a reasonable distance of the product; access to
and use of all information and facilities determined necessary by HP to
service the product; and operating supplies and consumables such as the
customer would use during normal operation.
A representative of the customer must be present at all times. The
customer must state if the product is being used in an environment
which poses a potential health hazard to repair personnel; HP or the
servicing dealer may require that the product be maintained by customer
personnel under direct HP or dealer supervision.
Appendix A
77
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
hp hardware warranty
ob ta ining p a rts wa rra nty se rvic e
When parts warranty service applies, the customer may be required to
run HP-supplied diagnostic programs before a replacement part will be
dispatched. The customer must be prepared to supply proof of purchase.
The customer shall return some defective parts upon HP demand. In
that case, HP will prepay shipping charges for parts returned to the HP
parts service center.
hp te le p hone sup p ort se rvic e s
HP free telephone support for your Workstation is available during the
first year from date of purchase. This service will also provide technical
assistance with the basic configuration and setup of your HP
Workstation and for the bundled or pre-loaded operating system.
HP does NOT provide telephone support for Workstations configured as
network servers. We recommend HP NetServers for your network server
requirements.
(Rev. 17/03/98)
78
Appendix A
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
hp software limited warranty
hp softwa re lim ite d wa rra nty
THIS HP SOFTWARE LIMITED WARRANTY SHALL COVER ALL
SOFTWARE, INCLUDING OPERATING SYSTEM SOFTWARE, THAT
IS PROVIDED TO YOU AS PART OF THE HP PRODUCT. IN CASE OF
CONFLICT BETWEEN HP AND NON-HP WARRANTY TERMS,
THESE HP WARRANTY TERMS SHALL PREVAIL.
softwa re
hp softwa re wa rra nty
HP warrants for a period of ninety (90) days from the date of purchase
that all pre-installed HP software will execute their programming
instructions when all files are properly installed. HP does not warrant
that the software will be uninterrupted or error free. In case of software
failure to execute its programming instructions during the warranty
period, customer’s remedy will be the replacement of software provided
by HP or a refund upon return of the product and all copies of software,
installation instructions and remote assistance (by phone and/or by
E-mail).
othe r softwa re (if sup p lie d ): All other software is warranted by the
software vendor and is not warranted by HP.
op e ra ting syste m
Linux op e ra ting syste m s a nd softwa re
HP warrants for a one (1) year period from the date of the purchase the
installation and configuration of the pre-installed version of the
operating system and software. HP does not warrant that the
functionality of the operating system and software will be uninterrupted
or error free. During the warranty period, in the event of a software
failure to execute its programming instructions during the installation
and/or configuration, HP will provide customers with remote assistance
(by phone and/or by mail) for re-installation and configuration.
a ll othe r op e ra ting syste m s: Other Operating Systems are warranted by
the Operating System vendor and are not warranted by HP.
Appendix A
79
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
hp software limited warranty
re m ova b le m e d ia (if sup p lie d )
HP warrants the removable media, if supplied, upon which this product
is recorded to be free from defects in materials and workmanship under
normal use for a period of ninety (90) days from the date of purchase.
Customer’s remedy in case of defect will be the replacement of media
provided by HP or a refund upon return of the product and destruction of
all other non-removable media copies of the software.
hp se rvic e p roc e d ure s
notice of warranty claims: Customer must notify HP in writing of any
warranty claim not later than thirty (30) days after the expiration of the
warranty period.
lim ita tion of wa rra nty: HP makes no other express warranty, whether
written or oral with respect to this product. Any implied warranty of
merchantability or fitness for a particular purpose is limited to the
90-day duration of this written warranty. HP is not liable in case of
misuse, unauthorized modification, improper maintenance, or defects
resulting from unauthorized use with non HP equipment.
lim ita tion of lia b ility a nd re m e d ie s: THE REMEDIES PROVIDED
ABOVE ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES. IN
NO EVENT SHALL HP BE LIABLE FOR ANY DIRECT, INDIRECT,
SPECIAL,
INCIDENTAL
OR
CONSEQUENTIAL
DAMAGES
(INCLUDING LOST PROFIT) WHETHER BASED ON WARRANTY,
CONTRACT, TORT OR ANY OTHER LEGAL THEORY.
This warranty in no way effects Customer’s right under statutory law.
ob ta ining wa rra nty se rvic e : Warranty Service may be obtained from the
nearest HP Sales office or in other locations indicated on HP’s Web Site.
hp softwa re lic e nse a g re e m e nt
Your HP product contains software programs.
CAREFULLY READ THIS LICENSE AGREEMENT AND LIMITED
WARRANTY STATEMENT BEFORE PROCEEDING TO OPERATE
THIS EQUIPMENT. RIGHTS IN THE SOFTWARE ARE OFFERED
ONLY ON THE CONDITION THAT THE CUSTOMER AGREES TO
ALL TERMS AND CONDITIONS OF THE LICENSE AGREEMENT.
PROCEEDING TO OPERATE THE EQUIPMENT INDICATES YOUR
ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO
NOT AGREE WITH THE TERMS OF THE LICENSE AGREEMENT,
YOU MUST NOW EITHER REMOVE THE SOFTWARE FROM YOUR
80
Appendix A
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
hp software limited warranty
HARD DISK DRIVE AND DESTROY THE MASTER DISKETTES, OR
RETURN THE COMPLETE HP PRODUCT AND SOFTWARE FOR A
FULL REFUND. PROCEEDING WITH CONFIGURATION SIGNIFIES
YOUR ACCEPTANCE OF THE LICENSE TERMS.
Linux components are licensed to you under the Red Hat License
Agreement contained in the Red Hat documentation or displayed on your
screen when Red Hat Software Products are launched. Other non-HP
Software and Operating Systems are covered by the appropriate vendor
license. The following License Terms govern the use of the HP software:
owne rship . Customer agrees that he/she does not have any title or
ownership of the software, other than ownership of the physical media.
Customer acknowledges and agrees that some of the installed software
components are open source, and licensing for these software
components is governed by GNU General Public License (GPL) while
other components are copyrighted and protected under the copyright
laws. Customer acknowledges and agrees to abide by the licensing
agreements applicable to each of the various components that are
installed on the system.
p rod uc t re c ove ry CD-ROM. If your HP product was shipped with a
product recovery CD-ROM: (i) The product recovery CD-ROM and/or
support utility software may be used for restoring the hard disk of the
HP product with which the product recovery CD-ROM was originally
provided. (ii) Use of the recovery CD-ROM on systems other than those
shipped with the CD will void any applicable HP warranties. (iii) The use
of any operating system software from Red Hat contained in any such
product recovery CD-ROM shall be governed by the Red Hat and GPL
License Agreements.
sup p ort p olic y for sup p ort p a c k of op e ra ting syste m s. HP provides end
user support for HP Workstations that use Linux Operating Systems.
Appendix A
81
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty and regulatory information
hp software limited warranty
82
Appendix A
Download from Www.Somanuals.com. All Manuals Search And Download.
|