HP Hewlett Packard Computer Hardware bc1000 User Manual

QuickSpecs

Overview

HP bc1000 blade PC

At a Glance

1.0-GHz Transmeta Efficeon TM8000

40-GB Ultra ATA/100 5400 rpm hard drive

512-MB DDR SDRAM PC2700 (333-MHz) expandable to 1024 MB (2 SODIMM slots)

(NOTE: 32 MB of system RAM is reserved for processor usage.)

Two Broadcom 5705F 10/100 Integrated Network Controllers. NIC 1 is compliant with PXE (Pre-boot execution Environment)

Connector for graphics diagnostics card

Blade PCs protected by HP Services, including a limited three-year parts warranty with optional service uplifts available

Download from Www.Somanuals.com. All Manuals Search And Download.

DA - 11903

North America — Version 5 — May 20, 2005

Page 1

QuickSpecs

Standard Features

HP bc1000 blade PC

Processor

One Transmeta Efficeon TM8000 1.0-GHz processor, integrated North Bridge with 400-MHz Hyper

Transport South Bridge interface

Cache Memory

Chipset

1024K L2

ALi M1563M South Bridge

NOTE: For more information regarding Acer Labs Inc, please see the following URL:

http://www.ali.com.tw/.

Memory

Standard

Maximum

512-MB DDR SDRAM PC2700 (333-MHz) (1x512 MB SODIMM)

(NOTE: 32 MB of system RAM is reserved for processor usage.)

1024 MB (2 SODIMM slots total)

Network Controller

Internal Storage

Two 5705F 10/100 Integrated Network Controllers. NIC 1is compliant with PXE

One 40-GB Ultra ATA/100 5400 rpm hard drive

Industry Standard

Compliance

ACPI 1.0b; ANSI C63.4 - 1992; C.I.S.P.R. Pub 22; CFR 47, Part 15; EN 55022; EN 55024;

EN 60950: 2000; ICES-003; IEC 61000-4, Section 2-6, 8, 11; IEC 730-1; IEC 801, Part 2;

IPC-A-610; PC2700; PCI 2.3; PXE 2.1; SPD 1.2B; UL 94; UL 796; USB 1.1

Manageability

HP Systems Insight Manager

ROM Based Setup Utility (RBSU)

Automatic System Recovery (ASR)

System Software Manager (SSM)

DOS-based replicated setup utility (REPSET)

Unit ID LED

High Availability

Robust boot block recovery ROM

F5 auto roll over to new blade

Dual network communication paths

Security

Administrator's password

OS Support

Microsoft® Windows® XP Pro with Service Pack 1a

Download from Www.Somanuals.com. All Manuals Search And Download.

DA - 11903

North America — Version 5 — May 20, 2005

Page 3

QuickSpecs

Standard Features

HP bc1000 blade PC

HP e-Class Blade PC Enclosure (sold separately)

Rack Capability

Mounts in HP 10000 and 9000 series, HP System-E, as well as third-party, and Telco racks. Rack

mounting hardware for HP and third-party racks ships standard with each blade enclosure. Telco rack-

mounting hardware is a separately available option kit.

Rack Airflow

Requirements

The increasing power of new high-performance processor technology requires increased cooling

efficiency for rack-mounted blade PCs. The HP 10000 Series Racks provide enhanced airflow for

maximum cooling, allowing these racks to be fully loaded with blade PCs using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure

adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U rack includes closing front and rear doors, you must allow

5,350 square cm (830 square inches) of hole evenly distributed from top to bottom to permit

adequate airflow (equivalent to the required 64 percent open area for ventilation).

Side: The clearance between the installed rack component and the side panels of the rack must be

a minimum of 7 cm (2.75 inches).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This

arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling

that can lead to thermal damage.

NOTE: Please consult the Setup & Installation Guide for the blade PC for additional details.

Enclosure includes

3U high rack-mountable chassis with 20 blade PC bays

Rack mounting hardware for HP, Compaq-branded and third-party racks

Rear bay for Interconnect Switch for network cable management

Two (2) Diagnostic Adapters (see features following) for connecting keyboard, video, mouse and other

devices locally to individual blade PCs

ProLiant Essentials Foundation Pack licenses for 20 Blade PCs (see features following), includes the HP

Systems Insight Manager and ProLiant Essentials Rapid Deployment Pack CD

Four hot-plug fans

Dual hot-plug power supplies (600 watts each), power cords

Blade PC blanks (to fill 19 of the 20 blade PC bays)

Null-modem cable for serial connection to the Integrated Administrator serial "Console" connector

HP Documentation CD

Diagnostic Adapter

Interfaces

NOTE: Two Diagnostic Adapters are included with every enclosure.

Blade PC LEDs (6)

PS/2 Mouse

PS/2 Keyboard

VGA monitor (functional only when graphics diagnostics card installed)

Serial RS-232 port

USB 1.1 ports (2)

Download from Www.Somanuals.com. All Manuals Search And Download.

DA - 11903

North America — Version 5 — May 20, 2005

Page 4

QuickSpecs

Standard Features

HP bc1000 blade PC

ProLiant Essentials

Foundation Pack Software Manager

HP Systems Insight

Systems Insight Manager helps maximize system uptime and performance

and reduces the cost of maintaining the IT infrastructure by providing

proactive notification of problems before those problems result in costly

downtime and reduced productivity. Insight Manager is easy to set up and

provides rapid access to inventory information.

http://www.hp.com/go/hpsim/.

ProLiant Essentials Rapid An automated solution for deployment and provisioning, enabling

Deployment Pack

companies to quickly and easily adapt to changing business demands.

NOTE: For more information regarding ProLiant Essentials Software, please

see the following URL: http://www.hp.com/servers/proliantessentials.

Interconnect Switch

Full featured web-based interface, menu-driven console interface, SNMP-

Management System and based scripting utility and example scripts, SNMP and RMON MIBs, and

Utilities TFTP utilities for management of interconnect switch.

C-GbE Interconnect Switch Features (sold separately)

Provides up to a 40-to-1 reduction in network cables for each blade enclosure using a pair of non-blocking layer 2 switch

modules

Four RJ-45 10/100/1000T Gigabit Ethernet uplinks

Forty 10/100T Ethernet ports dedicated to blade-to-interconnect switch network communications

Communicate with all 40 blade PC network controllers through any one uplink connector and the management connector

Includes Integrated Administrator module (see features following)

Spanning tree protocol for loop-free path redundancy

Browser, scriptable CLI, and console-based interfaces for local and remote interconnect switch management

Manage entire interconnect switch through the Integrated Administrator connectors or any uplink connector

Telnet, RMON and SNMP support; SNMP-based scripting utility with example scripts

IGMP (internet group management protocol) multicasting and quality of service (QoS) packet prioritization

TFTP support for rapid deployment of multiple interconnect switches and to provide backup and restore capabilities

Industry-standard design compatible with industry-standard network components from leading network manufacturers

Fully pre-configured for rapid deployment and immediate operation in HP e-Class Blade PC Enclosure

For more information on the C-GbE Interconnect Switch, please visit the Web site at:

http://h18000.www1.hp.com/products/servers/proliant-bl/e-class/interconnect-switch.html.

Download from Www.Somanuals.com. All Manuals Search And Download.

DA - 11903

North America — Version 5 — May 20, 2005

Page 5

QuickSpecs

Standard Features

HP bc1000 blade PC

HP Integrated Administrator Features

Out-of-band local console and remote network access to the blade enclosure and all 20 blade PCs via (one) RJ-45

10/100BaseT Fast Ethernet and (one) RS-232 management connectors

Provides local and remote access to the C-GbE Interconnect Switch command console

Remotely power on/off/reboot blade PCs and enclosures

Remotely toggle on/off unit identification (UID) LEDs of blade PCs and enclosures

Monitors and controls the enclosure fans, temperature sensors, power supplies, interconnect switch and blade PC status

Connect to each blade PC's serial text console for enabling full control over blade PC's Power-On Self Test (POST) and boot

process, including the ROM-Based Setup Utility (RBSU).

User administration for up to 25 users. Blade PC bay privileges can be set on a per-user basis

Virtual NMI button generates non-maskable interrupt for crash debug and analysis

More than 100 scriptable commands enable automated management

Selective enabling of all protocols, such as Telnet

Logging of operating system console, blade PC and enclosure hardware events, user actions and invalid login attempts

Administrator notification that a blade is warm

Enclosure controller blade shutdown (graceful Windows shutdown) if blade overheats

Emergency blade shutdown in the event of a critical temperature fault

Enclosure Link (2) connectors reserved for future use.

CAUTION: The enclosure link (RJ-45) connectors on the interconnect tray are not to be used. Connecting an external device to

these enclosure link (RJ-45) connecters may damage your external device.

For more information on the Integrated Administrator, please visit the Web site at:

http://h18000.www1.hp.com/products/servers/proliant-bl/e-class/integrated-admin.html.

Service and Support

HP Services provides a wide range of service offerings, including a three-year, limited parts warranty on

the HP bc1000 blade PC.

CAUTION: Do not ship the blade PCs and enclosure while inside the rack without first installing the e-

Class Enclosure Shipping Bracket (part number PH555A). Failure to use the shipping bracket may cause

damage to the blade PC and/or enclosure, thereby voiding the warranty.

The HP e-Class Blade PC Enclosure has a three-year, limited warranty on parts, labor and on-site

support.

Warranties are fully supported by a network of resellers and service providers in over 160 countries. HP

warranty assistance is available 7x24, toll free in the United States and Canada. Other additional

support services may be covered under warranty or available for an additional fee.

A full range of HP Care Pack packaged hardware and software services:

Add labor or on-site service for the blade PC

Installation and start up

Extended coverage hours and enhanced response times

System management and performance services

Availability and recovery services

NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack.

NOTE: Certain restrictions and exclusions apply. Consult the Customer Support Center at 1-800-567-

1616 for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

DA - 11903

North America — Version 5 — May 20, 2005

Page 6

QuickSpecs

Models

HP bc1000 blade PC

bc1000 blade PC

DS658A (1 pack)

Processor

1.0-GHz Transmeta Efficeon TM8000

1024K L2

Cache Memory

Memory

512-MB DDR SDRAM PC2700 (333-MHz)

Two Broadcom 5705F 10/100 Integrated NICs

40-GB Ultra ATA/100 5400 rpm

Network Controller

Hard Drive

Form Factor

Plugs vertically into HP e-Class Blade PC Enclosure

bc1000 blade PC

DS659A (10 pack)

Processor

1.0-GHz Transmeta Efficeon TM8000

1024K L2

Cache Memory

Memory

512-MB DDR SDRAM PC2700 (333-MHz)

Two Broadcom 5705F 10/100 Integrated NICs

40-GB Ultra ATA/100 5400 rpm

Network Controller

Hard Drive

Form Factor

Plugs vertically into HP e-Class Blade PC Enclosure

Download from Www.Somanuals.com. All Manuals Search And Download.

DA - 11903

North America — Version 5 — May 20, 2005

Page 7

QuickSpecs

Options

HP bc1000 blade PC

Enclosure and Switch

HP e-Class Blade PC Enclosure (includes 20 licenses for ProLiant Essentials Rapid

DW366A

Deployment Pack at 50% of the standard per-node license list price)

Enclosure Shipping Bracket Kit

NOTE: When shipping an enclosure in a rack, shipping brackets must be installed to

the rack.

C-GbE Interconnect Switch (includes Integrated Administrator module)

DW367A

PA715A

Memory

512-MB DDR SDRAM PC2700 (333-MHz) Option Kit (1 x 512 MB)

Miscellaneous

PS/2 Mouse

DD440B

DT527A

PS/2 Keyboard

TFT5600 Rackmount Keyboard and Monitor

TFT721OR 17-inch Rackmount Monitor

Integrated Keyboard and Drawer

External USB MultiBay Caddy

Third-party Rail Kit for HP Input Devices

Telco Rail Kit for HP Input Devices

MultiBay 24X CD-ROM

221546-001

348373-B21

257054-001

DC373A#ABA

287139-B21

287138-B21

217396-930

DV300C

Graphics Diagnostics Card (5 pack)

UPS and PDU Power

Cord Matrix

Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and

specifications for UPS and PDU units:

ftp://ftp.compaq.com/pub/products/servers/ProLiantstorage/power-protection/powercordmatrix.pdf.

Uninterruptible Power

Systems – Rack

HP UPS R1500 XR (1440VA, 1340 Watt), Low Voltage

HP UPS R3000 XR (2880VA, 2700 Watt), Low Voltage

HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage

204404-001

192186-001

192186-002

347207-001

Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage

NOTE: The UPS R6000 has a hardwired input.

UPS R12000 XR N+ x (200-240V) (hardwired)

207552-B22

NOTE: The UPS R12000 XR has a hardwired input and output.

Download from Www.Somanuals.com. All Manuals Search And Download.

DA - 11903

North America — Version 5 — May 20, 2005

Page 8

QuickSpecs

Options

HP bc1000 blade PC

UPS Options

SNMP Serial Port Card

NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA.

192189-B21

Six Port Card

192185-B21

388643-B21

NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA.

High to Low Voltage Transformer (250VA)

NOTE: Supports R6000 UPS series only. 2.5 amps @ 125 Volts max output across

two NEMA 5-15.

Extended Runtime Module, R1500 XR

NOTE: 2U each, two ERM maximum.

218971-B21

192188-B21

326564-B21

347224-B21

217800-B21

325361-001

325361-B21

347225-B21

123508-B21

123509-B21

Extended Runtime Module, R3000 XR

NOTE: 2U each, one ERM maximum.

Extended Runtime Module, R5500 XR

NOTE: 3U each, two ERM maximum.

Extended Runtime Module, R6000

NOTE: 3U each, two ERM maximum.

Extended Runtime Module, R12000 XR, 4U

NOTE: 4U each, two ERM maximum.

R12000 XR BackPlate Receptacle Kit, (2) L6-30R

NOTE: The R12000 XR BackPlate Kit has a hardwired input.

R12000 XR BackPlate Receptacle Kit, (2) IEC-309R

NOTE: The R12000 XR BackPlate Kit has a hardwired input.

SNMP-EN Adapter

NOTE: Supports R6000 UPS series only.

Multi-Server UPS Card

NOTE: Supports R6000 UPS series only.

Scalable UPS Card

NOTE: Supports R6000 UPS series only.

Rack-Mountable PDUs – HP Power Distribution Unit-16A (200 to 240V)

1U/0U (Up to 12 outlets) NOTE: The 16A PDU also connects to the high volt models of the UPS R3000 XR

207590-B21

207590-B23

NOTE: 0U mounting

(need cable PN 340653-001) and the UPS R6000 models. Cable PN 340653-001

brackets shipped with the required if connecting to UPS R3000 XR (192186-002-High Volt model only).

unit (separate option kit

for 1U mounting).

HP Power Distribution Unit-40A (200 to 240V)

NOTE: Please see the following Power Distribution Unit (Zero-U/1U PDU)

QuickSpecs for additional options, including cables:

http://h18000.www1.hp.com/products/quickspecs/10838_na/10838_na.HTML

Download from Www.Somanuals.com. All Manuals Search And Download.

DA - 11903

North America — Version 5 — May 20, 2005

Page 9

QuickSpecs

Options

HP bc1000 blade PC

Modular PDUs 1U/0U

(Up to 32 outlets)

Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC)

NOTE: This model has a detachable input power cord and is adaptable to country

252663-B24

specific requirements. The 16A PDU also connects to the high volt models of the UPS

R3000 XR and R6000 models. Cable P/N 340653-001 required if connecting to UPS

R3000 XR (192186-002-High Volt model only).

Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC)

Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127 VAC)

252663-D72

252663-D71

252663-B21

Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240 VAC)

NOTE: This mPDU (252663-B21), 40A model has a hardwired input.

NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U

Modular PDUs) QuickSpecs for additional options including shorter jumper cables

and country specific power cords:

http://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.HTML

PDU Options

Third Party PDU Mounting Kit

310777-B21

NOTE: This kit allows you to mount the Modular PDUs in racks other than the

9000/10000 Series racks (any racks using the standard 19" rail). For more details

please refer the Modular PDU QuickSpecs.

Enterprise Configurator

Please see the CO for configuration assistance at: http://www.hp.com/products/configurator.

HP Rack 10000 Series

(Graphite Metallic)

S10614 (14U) Rack Cabinet – Shock Pallet

HP Rack 10647 (47U) – Pallet

292302-B22

245160-B21

245160-B23

245161-B21

245161-B22

245161-B23

245162-B21

245162-B22

245162-B23

245163-B21

245163-B22

245163-B23

257415-B21

257415-B22

HP Rack 10647 (47U) – Crated

HP Rack 10642 (42U) – Pallet

HP Rack 10642 (42U) – Shock Pallet

HP Rack 10642 (42U) – Crated

HP Rack 10636 (36U) – Pallet

HP Rack 10636 (36U) – Shock Pallet

HP Rack 10636 (36U) – Crated

HP Rack 10622 (22U) – Pallet

HP Rack 10622 (22U) – Shock Pallet

HP Rack 10622 (22U) – Crated

HP Rack 10842 (42U) – 800 mm wide – Pallet

HP Rack 10842 (42U) – Crated

NOTE: -B21 (pallet) used to ship empty racks shipped on a truck

-B22 (shock pallet) used to ship racks with equipment installed (by custom systems,

VARs and Channels)

-B23 (crated) used for air shipments of empty racks

NOTE: Not all HP equipment is qualified to be shipped in the Rack 10000 series.

NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as

height, width, depth, weight, and color:

http://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.HTML

For additional information regarding Rack Cabinets, please see the following URL:

http://h18000.www1.hp.com/products/servers/proliantstorage/racks/index.html.

D^DA^ow-^nl1^oa1^d9^f0^ro3^{m Ww}N^w.o^Sort^mh^aA^num^ae^lsr^.cic^oa^m.—^AllV^Me^arⁿs^uio^aln^{s S}5^ea—^rchM^Aa^ndy ^D2^o0^w,ⁿ2^lo0^a0^d.5

Page 10

QuickSpecs

Options

HP bc1000 blade PC

Rack Options for HP Rack Rack Blanking Panels – Graphite (Multi)

253214-B26

253214-B21

253214-B22

253214-B23

253214-B24

253214-B25

10000 Series

NOTE: Contains one each of 1U, 2U, 4U and 8U.

Rack Blanking Panels – Graphite (1U)

NOTE: The Rack Blanking Panels Kit contains 10 each of (1U).

Rack Blanking Panels – Graphite (2U)

NOTE: The Rack Blanking Panels Kit contains 10 each of (2U).

Rack Blanking Panels – Graphite (3U)

NOTE: The Rack Blanking Panels Kit contains 10 each of (3U).

Rack Blanking Panels – Graphite (4U)

NOTE: The Rack Blanking Panels Kit contains 10 each of (4U).

Rack Blanking Panels – Graphite (5U)

NOTE: The Rack Blanking Panels Kit contains 10 each of (5U).

600mm Stabilizer Kit – Graphite

246107-B21

248929-B21

246099-B21

257413-B21

Baying Kit for Rack 10000 series (Carbon)

42U Side Panel – Graphite Metallic

110V Fan Kit (Graphite)

NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 5-15P.

220V Fan Kit (Graphite)

257414-B21

NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 6-15P.

36U Side Panel – Graphite Metallic

47U Side Panel – Graphite Metallic

9000/10000 Series Offset Baying Kit (42U)

246102-B21

255486-B21

248931-B21

NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U

height together. Kit contents include hardware for connecting racks and a panel to

cover the 100mm gap at the rear of the two racks.

Cable Management

FC Cable Routing Spool – box of 12

Rail-to-Rail FC Cable Routing

293357-B21

293358-B21

293359-B21

292407-B21

168233-B21

Side Rail FC Routing – box of 6

Compaq Networking Cable Management Kit

Cable Management D-Rings Kit

Rack Options for Rack

10000 Series

Monitor Utility Shelf

303606-B21

120672-B21

234672-B21

120675-B21

260457-B21

234672-B21

Ballast Option Kit

100kg Sliding Shelf

Rack Rail Adapter Kit (25" depth)

9000/10000 Grounding Kit

100-kg Shelf Kit

NOTE: This 100Kg Shelf Kit (PN 234672-B21) supports the Rack 10000 and 9000

series only.

D^DA^ow-^nl1^oa1^d9^f0^ro3^{m Ww}N^w.o^Sort^mh^aA^num^ae^lsr^.cic^oa^m.—^AllV^Me^arⁿs^uio^aln^{s S}5^ea—^rchM^Aa^ndy ^D2^o0^w,ⁿ2^lo0^a0^d.5

Page 11

QuickSpecs

Options

HP bc1000 blade PC

Rack Options for HP,

Third Party and Telco

racks

Telco rack-mounting hardware kit for HP e-Class Blade PC Enclosure

Enclosure Shipping Bracket Kit

NOTE: When shipping an enclosure in a rack shipping brackets must be installed to

the rack.

266076-B21

293119-B21

NOTE: For more information on rack and rack options, please visit the following url:

http://h18000.www1.hp.com/products/servers/proliantstorage/rack-

options/index.html.

D^DA^ow-^nl1^oa1^d9^f0^ro3^{m Ww}N^w.o^Sort^mh^aA^num^ae^lsr^.cic^oa^m.—^AllV^Me^arⁿs^uio^aln^{s S}5^ea—^rchM^Aa^ndy ^D2^o0^w,ⁿ2^lo0^a0^d.5

Page 12

QuickSpecs

Memory

HP bc1000 blade PC

Standard Memory

512-MB 333-MHz DDR SDRAM (1x512 MB SODIMM) installed. (NOTE: 32 MB of system RAM is reserved for processor usage.)

Standard Memory Plus Optional Memory

Up to 1024 MB of DDR SDRAM is available with the installation of optional DDR SDRAM memory expansion kits (sold separately).

Memory

Slot

Standard

Maximum

512 MB

1024 MB

Empty

512 MB

D^DA^ow-^nl1^oa1^d9^f0^ro3^{m Ww}N^w.o^Sort^mh^aA^num^ae^lsr^.cic^oa^m.—^AllV^Me^arⁿs^uio^aln^{s S}5^ea—^rchM^Aa^ndy ^D2^o0^w,ⁿ2^lo0^a0^d.5

Page 13

QuickSpecs

Technical Specifications

HP bc1000 blade PC

Dimensions

Height

4.7 in (11.94 cm)

0.8 in (2.03 cm)

15.5 in (39.37 cm)

2.2 lb (1.0 kg)

Width

Depth

Weight

Maximum

Operating

Temperature

50° to 95° F (10° to 35° C)

Non-operating shipping -40° to 140° F (-40° to 60° C)

Non-operating storage

Operating

-4° to 140° F (-20° to 60° C)

10% to 90%

Relative humidity

(noncondensing)

Non-operating shipping 10% to 90%

Non-operating storage

Unit identification

10% to 95%

LEDs (Top to bottom)

Off = off

Steady blue = blade identified

Blinking blue = being accessed remotely

Off = off

Health

Green = health good

Amber = degraded or power up prohibited by

the Integrated Administrator

Blinking or steady red = critical

Off = off

NIC 1

NIC 2

Green = linked to network

Blinking green = Activity on network

Off = off

Green = linked to network

Blinking green = activity on network

Off = No drive activity

Drive activity

Power

Blinking green = drive activity

Off = no AC power to blade or enclosure

Amber = Enclosure on and in good health

Green = blade power on

NOTE 1: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Storage

maximum humidity of 95% is based on a maximum temperature of 112° F (45° C). Minimum pressure for storage is 70 KPa.

40-GB Ultra ATA/100

Hard Drive

Capacity

Interface

40 GB

Ultra ATA 100

Transfer rate synchronous 100 MB/s

(maximum)

Seek time (typical reads, Single track

1.5 ms

12 ms

22 ms

including settling)

Average

Maximum

Rotational speed

5400 rpm

D^DA^ow-^nl1^oa1^d9^f0^ro3^{m Ww}N^w.o^Sort^mh^aA^num^ae^lsr^.cic^oa^m.—^AllV^Me^arⁿs^uio^aln^{s S}5^ea—^rchM^Aa^ndy ^D2^o0^w,ⁿ2^lo0^a0^d.5

Page 14

QuickSpecs

Technical Specifications

HP bc1000 blade PC

Broadcom 5705F 10/100

Integrated NIC

Network interface

10Base-T/100Base-TX

Compatibility

IEEE 802.3/802.3u compliant

32-bit bus-master PCI

Data transfer method

Features

NIC 1 WOL enabled and PXE compliant

Network transfer rate

10Base-T (half-duplex)

10Base-T (full-duplex)

10 Mb/s

20 Mb/s

100Base-TX (half-duplex) 100 Mb/s

100Base-TX (full-duplex) 200 Mb/s

Mates into enclosure center wall assembly

Connector

Cable support

10Base-T

Categories 3, 5, or 6 UTP; up to 328 ft (100 m)

Category 5 or 6 UTP; up to 328 ft (100 m)

100Base-TX

Enclosure

Dimensions

Height (3U)

Width

5.25 in (13.34 cm)

19 in (48.26 cm)

27 in (68.58 cm)

59 lb (26.76 kg)

103 lb (46.7 kg)

Depth

Weight (with interconnect No blade PCs

tray)

20 blade PCs

Rated input (autosensing) Voltage

Minimum: 90 VAC

Maximum: 264 VAC

Nominal: 100 to 120 VAC or 200 to 240 VAC

Frequency

Current

47 to 63 Hz

11.7 A at 90 VAC

8.5 A at 120 VAC

4.3 A at 240 VAC

Power

1000 W

BTUs

Per hour

3416

Temperature

Operating

50° to 95° F (10° to 35° C)

-40° to 140° F (-40° to 60° C)

10% to 90%

Shipping, 72 hours

Operating

Relative humidity

(noncondensing)

Non-operating

10% to 95%

Management

Enclosure self recovery

Health logs

Redundant power supply utility

Automatic System Recovery (ASR)

High availability

Redundant hot-plug power supplies

Redundant hot-plug fans

NOTE 1: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Storage

maximum humidity of 95% is based on a maximum temperature of 112° F (45° C). Minimum pressure for storage is 70 KPa.

D^DA^ow-^nl1^oa1^d9^f0^ro3^{m Ww}N^w.o^Sort^mh^aA^num^ae^lsr^.cic^oa^m.—^AllV^Me^arⁿs^uio^aln^{s S}5^ea—^rchM^Aa^ndy ^D2^o0^w,ⁿ2^lo0^a0^d.5

Page 15

QuickSpecs

Technical Specifications

HP bc1000 blade PC

Enclosure Hot-Plug Power

Supply

Dimensions

Height

3.579 in (9.14 cm)

10.24 in (28.45 cm)

4.47 in (11.43 cm)

Depth

Width

Weight

6.5 lb (2.95 kg)

Voltage (autosensing)

Frequency

Rated input

100 to 127 VAC (200 to 240 VAC)

47 to 63 Hz

Current

8.5 A at 120 VAC (4.3 A at 240 VAC)

1000 W

Power

Maximum peak power

Voltage/current

1167 W

Rated output

5.01 V - 0.5 A ~ 34 A

3.33 V - 0.5 A ~ 36 A

12.1 V - 0.5 A ~ 38 A

5 Vaux - 0.2 A ~ 8 A

600 W

Power RMS

Maximum peak power

Operating

700 W for 2 minutes

5° to 55° F (10° to 35° C)

Temperature

Non-operating, shipping -40° to 85° F (-40° to 60° C)

Relative humidity

(noncondensing)

Operating

10% to 90%

Non-operating

Input to output

Input to ground

10% to 95%

Dieletric voltage

withstand

2000 VAC minimum

1500 VAC minimum

NOTE 1: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Storage

maximum humidity of 95% is based on a maximum temperature of 112° F (45° C). Minimum pressure for storage is 70 KPa.

C-GbE Interconnect

Switch

General

Two 24-port Managed Layer 2 Ethernet switches for network cable

reduction; fully pre-configured for immediate operation

Performance

4.0 Gbps Switching bandwidth

12 million pps aggregate throughput (64-byte packets)

Full-wire speed for all connections

Store and forward

Forwarding mode

MAC addresses

16,382; MAC address based filtering and MAC address packet priority

configuring

Memory

64 MB Main

12 MB Flash

32 MB Packet Buffer

D^DA^ow-^nl1^oa1^d9^f0^ro3^{m Ww}N^w.o^Sort^mh^aA^num^ae^lsr^.cic^oa^m.—^AllV^Me^arⁿs^uio^aln^{s S}5^ea—^rchM^Aa^ndy ^D2^o0^w,ⁿ2^lo0^a0^d.5

Page 16

QuickSpecs

Technical Specifications

HP bc1000 blade PC

Ports

Four RJ-45 10/100/1000 T/TX/T Gigabit Ethernet uplink ports for customer

use

Forty 10/100 T/TX fast Ethernet downlink ports dedicated to blade PC to

interconnect switch network connections

Two 10/100 T/TX Fast Ethernet ports dedicated to inter-switch module

communications

One RS-232 DB-9 port (console connector for Integrated Administrator)

One 10/100 T/TX Fast Ethernet port (Network management connector for

Integrated Administrator)

Auto-negotiation and auto-sensing with full-duplex

Web-based interface with graphical user interface

Console menu driven Interface via local RS-232 and Telnet

Scriptable command line interface (CLI)

Management

SNMP v1 (RFC 1157) with scripting tool and example scripts

RMON v1 (RFC 1757) groups 1, 2, 3, and 9

Telnet (RFC 854)

MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233),

801.1Q MIB (RFC 2684), RMON1 MIB (RFC 1757) groups 1, 2, 3, and 9,

Ethernet MIB (RFC1643) and HP-specific switch MIBs

XML human read/write configuration file

TFTP client (RFC 783) for backup and remote download of configuration

and history log files

IGMP (Internet Group Management Protocol) multicasting

Uplink port speed and link activity LEDs

Simple network time protocol (SNTP)

Broadcast, multicast, and DA-unknown packet storm control

BootP and DHCP client support

Port mirroring

HP Interconnect Switch Management System and Utilities

High availability

Security

Dual network communication paths using redundant, non-blocking layer 2

switch modules with redundant inter-module communication links

Two redundant uplink ports per each interconnect switch module

Spanning tree protocol for loop-free path redundancy

Multilevel user names and passwords with configurable time out period

setting, IP address restriction

IEEE standards

compliance

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Ethernet

IEEE 802.3ab 1000Base-T Ethernet

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1p Quality of Service (QoS) Packet Prioritization

IEEE 802.3x Flow Control

Form factor

Removable interconnect tray that plugs into the rear of the server blade

enclosure

D^DA^ow-^nl1^oa1^d9^f0^ro3^{m Ww}N^w.o^Sort^mh^aA^num^ae^lsr^.cic^oa^m.—^AllV^Me^arⁿs^uio^aln^{s S}5^ea—^rchM^Aa^ndy ^D2^o0^w,ⁿ2^lo0^a0^d.5

Page 17

QuickSpecs

Technical Specifications

HP bc1000 blade PC

Network transfer rate

10Base-T (half-duplex)

10Base-T (full-duplex)

10 Mb/s

20 Mb/s

100Base-TX (half-duplex) 100 Mb/s

100Base-TX (full-duplex) 200 Mb/s

1000Base-T (full-duplex, 2000 Mb/s

uplink ports only)

Cable support

10Base-T

Categories 3, 5, or 6 UTP; up to 328 ft (100 m)

Category 5 or 6 UTP; up to 328 ft (100 m)

100Base-TX

1000Base-T (uplink ports Category 5 or 6 UTP; up to 328 ft (100 m)

only)

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial

errors or omissions contained herein.

D^DA^ow-^nl1^oa1^d9^f0^ro3^{m Ww}N^w.o^Sort^mh^aA^num^ae^lsr^.cic^oa^m.—^AllV^Me^arⁿs^uio^aln^{s S}5^ea—^rchM^Aa^ndy ^D2^o0^w,ⁿ2^lo0^a0^d.5

Page 18

Greenheck Fan Gas Heater DGX User Manual
Grizzly Cordless Saw G0736 User Manual
Hans Grohe Indoor Furnishings 10020XX User Manual
Hans Grohe Plumbing Product 41435XX1 User Manual
Hearth and Home Technologies Stove CASTILE CSB User Manual
HP Hewlett Packard Video Game Console 10529A User Manual
Husqvarna Snow Blower 5524ST User Manual
Husqvarna Snow Blower Attachment 16530SB XLS User Manual
IBM Computer Accessories Version 52 User Manual
Image Home Gym IMBE53901 User Manual