Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
7. Checking Package Contents ........................................ 17
Connecting to AV Devices ........................................ 23
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Warranty and Service
The instructions on this manual are for the model(s) listed on the front
cover. Before you start reading, check your product number by looking
at the rear of your TV.
Thank you for purchasing our Liquid Crystal Display Television (LCD
TV). With this product, you will be able to enjoy superior audio and
video while enriching your lifestyle with advanced technology.
The Hannspree TV is warranted for one year limited service from the
date the product is received (as shown on the Warranty and Service
Manual); please refer to the "Warranty and Service Manual" for the
detailed warranty information.
Hannspree provides complete service information in the included "War-
ranty and Service Manual", or directly from Hannspree global customer
service center. Our service representatives will be very happy to serve
you to your satisfaction.
Hannspree global customer service center telephone number:
From Taiwan please call 0800-008-800
The Hannspree e-mail address:
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Preface
This manual is designed to assist users in setting up and using the LCD
TV. Information in this document has been carefully checked for accu-
racy; however, no guarantee is given to the correctness of the contents.
The information in this document is subject to change without notice.
Copyright
© Copyright 2003 Hannspree, Inc.
All rights reserved. This product and related documentation are pro-
tected by copyright and are distributed under licenses restricting their
use, copying, and distribution. No part of this documentation may be
reproduced in any form by any means without prior written authorization
of Hannspree, Inc., and its licensors, if any.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Description of Warning Symbols
Warning
Caution
This symbol is used to remind
users to pay attention to
important descriptions regard-
ing usage and maintenance
(repair) or additional impor-
tant information related to this
product.
This symbol is used to remind
users to pay attention to the
danger of electric shocks due
to dangerous internal non-
insulated components.
Electric Power Notice
Electric power may cause personal injury and mechanical damage if it is
misused. Although safety has been taken into consideration during the
design and production of this product, electric shock or fire can result
when the product is misused. To prevent potential danger, follow the
instructions below when installing, operating and cleaning the product.
In addition, read the following “Safety Notices” carefully before using the
product to ensure that your TV is safe and long-lasting.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Safety Notices
Power Supply Safety Notes
1. To avoid electric shocks, do not use an extended power cord or
an outlet that does not match this product's plug or leaves the
plug exposed.
2. This product has a 3-pin grounded plug. The third pin connects
to ground; do not remove it.
3. If the power cord or plug is damaged or worn, unplug it immedi-
ately and contact a qualified service technician for mainte-
nance.
4. To avoid fire or electric shocks, do not overload electric power
outlets.
Installation Safety Notes
Antenna
We suggest that you use an outdoor antenna to get the best signal
possible unless you have cable TV or a centralized indoor antenna
system. You may, however, use an antenna indoors if it is placed in
a location free from interference.
Location
Avoid allowing the TV to get prolonged exposure to sunlight or
other strong sources of heat. Leave sufficient distance between the
TV and the wall to provide enough space for the emission of heat.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Proceed
1. Read the Safety Notices and the User’s Manual carefully
before turning the product on.
2. Keep your User’s Manual in a safe place for future reference.
Keep the box and packaging in case the product needs to be
shipped in the future.
3. Follow the product and warning label instructions.
4. Any changes or modifications that do not follow the instructions
in this manual will void this product's warranty.
Warning
To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
Power
To avoid danger of fires or electric shock, make sure that you use a
proper adapter. The TV is compatible with the following adapters:
• EDAC POWER ELECTRONICS CO., LTD.: EA1050E-120
• LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Optimal Viewing Area
RCE
SOU
U
MEN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug: A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Protect the power cord from being walked on
or pinched particularly at the plug, conve-
nience receptacles, and the point where they
exit from the apparatus.
11. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
12. Only use attachments/accessories specified
by the manufacturer.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service per-
sonnel. Servicing is required when the appa-
ratus has been damaged in any way, such as
if the power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not oper-
ate normally, or has been dropped.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal Safety
To avoid overloading the power supply, do not
plug too many electrical devices into an outlet or
extension cable.
Dangerous high-voltage electric power compo-
nents are located inside the TV. To avoid electric
shock, do not disassemble the casing.
Do not place or drop metals, small objects, or
flammable materials in the vent to avoid an elec-
tric shock or a fire.
If the TV is dropped, falls down, or is otherwise
damaged, unplug the power cord immediately
and notify a qualified service technician.
If any fluid is sprayed or dropped into the TV,
remove the power plug immediately and notify a
qualified service technician.
The screen of the TV is made of glass, be care-
ful to avoid hitting or scraping it. If the screen is
broken, avoid cutting yourself on the broken
glass.
Do not allow children to use the TV unattended
to avoid accidents caused by improper opera-
tion.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
To avoid damage to power circuits, do not place
the TV in locations where there is excessive
steam or dust.
Do not place the TV on a bed, sofa, carpet, or in
a sealed cabinet to avoid blocking the product's
vents.
Install the outdoor antenna far from power trans-
mission lines to avoid possible danger.
Remove the power cord and antenna connector
when there is a storm or when the TV is not in
use for a long period to avoid electric shock from
lightning.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
This product is designed for power sources as
labeled on the casing. Avoid using any other
power accessories to avoid electric shock or
other damage.
V
The plug can be inserted into an outlet in only
one direction. Notify a qualified service techni-
cian if you cannot plug it in correctly.
If there is any problem that cannot be resolved
according to the instructions given in this man-
ual, notify a qualified service technician immedi-
ately. Do not attempt any methods not covered in
this manual.
Maintenance
Do not attempt to repair the TV by yourself.
Notify a qualified service technician. Ask the ser-
vice technician to complete a safety inspection
before switching the power on after completing
any maintenance.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Regulatory Information
FCC Compliance Statement1
This device complies with part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions: (1) This device may not cause harm-
ful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These lim-
its are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Warning: A shielded-type power cord is required in order to meet FCC
emission limits and also to prevent interference to nearby radio and tele-
vision reception. It is essential that only the supplied power cord be
used. Use only shielded cables to connect I/O devices to this equip-
ment. You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.
1. applies only to products purchased in the United States of America
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DOC Compliance Notice1
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This
device complies with Canada ICES-003 Class B.
CE Conformity Statement2
This device complies with the requirements set out in the Council Direc-
tive on the approximation of the Laws of the Member States relating to
Electromagnetic Compatibility (89/336/EEC) and the Amendment Direc-
tive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the Amend-
ment Directive (93/68/EEC).
1. applies only to products purchased in Canada
2. applies only to products purchased in the European Union
15
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Introducing the TV
Thank you for purchasing this Liquid
Crystal Display TV. Your TV is designed to
be safe, versatile, and easy to use.
The Hydra design makes it a fun addition
to any room.
You can watch standard NTSC television
channels, and easily connect a VCR, VCD,
or DVD player to the standard CVBS and
S-Video input ports located at the rear of
the unit.
E
C
R
U
O
S
NU
E
M
Convenient control buttons located on the
front panel let you change channels, adjust
the volume, and change display settings through an easy-to-use on-screen
menu system. The TV speakers provide full, rich stereo sound and a
convenient audio output port lets you connect to an external audio system or
headphones.
Features
•
•
•
•
9.6-inch color TFT LCD TV
Safe, sturdy construction
Built-in TV tuner
Audio/video support:
– Stereo audio inputs
– Composite video inputs
– S-Video input
•
•
•
On-screen display (OSD) menu system
Multi-channel Television Sounds (MTS) Stereo with SAP
Built-in 2W+2W stereo audio amplifier
16
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Checking Package Contents
Make sure the following components are included in the box. Contact your
vendor immediately if anything is missing or damaged.
TV
MENU
SOURCE
User’s Manual
Quick Start Guide
Warranty and Service
Manual
User's Man
ual
Quick S
tart
G
uide
W
arranty an
d service
manual
Wire Material Package
Power Cord
Power Adapter
4-IN-1 Cable
G
17
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Getting to Know Your TV
Front View
Signal sensor
MENU
SOURCE
6
6
MENU
SOURCE
5
1
2
3
4
Description
Menu
Function
Turns the on-screen display (OSD)
menus on and off.
1
2
Selects the input source to be displayed
(TV, AV1, or AV2).
Source
Channel up (S): Increases the channel
number. Channel down (T): Decreases
the channel number.
3
4
Select channel
Volume up (+): Increases the volume.
Volume down (–): Decreases the
volume.
Adjust volume
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Power
Function
Turns the TV on and off.
Green LED indicates power on.
5
6
Power LED
Speakers
Output audio content.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Input and Output Ports
AV2
R
L
VIDEO
DC-IN
ANT
AV1
L
AV2
R
VIDEO
DC-IN
ANT
1
3
4
2
Description
Function
Use the included 4-in-1 Audio/Video
cable to connect external devices, such
as a VCR, VCD, or DVD player.
Audio Input: AV connectors white and
red audio cables.
1
AV2
Video Input: AV connector video
(yellow) or S-Video cables.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
AV1
Function
Use the AV1 input to connect an external
device, such as a VCR, or a VCD, or
DVD player.
Audio Input: AV connector white and
red audio cables.
2
Video Input: AV connector video
(yellow) cable.
1
2
DC-IN
Connects to the included power adapter.
Antenna/cable TV
line in
Connects to an antenna or CATV cable
television line.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Getting Started
Connecting to an Antenna or Cable TV
1
Connect one end of the VHF/UHF (Antenna) or CATV cable to the
ANT Jack (VHF/UHF IN Jack) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the Antenna or CATV socket.
Antenna
AV2
R
L
VIDEO
DC-IN
ANT
AV1
L
AV2
R
VIDEO
DC-IN
ANT
socket
Antenna/CATV
ANT jack
(VHF/UHF IN jack)
Antenna/CATV
coaxial cable
Note
If you cannot receive channels after connecting to an antenna or cable TV
line, try scanning for channels. See “Auto Program” on page 47.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to AV Devices
Connect external devices such as VCD/DVD players or VCRs to the TV
using the AV1 and AV2 ports on the back of the TV.
Connecting to a VCR, VCD or DVD Player
The illustration presented here shows you how to connect your TV to a
VCR, VCD or DVD player. Actual connections may vary according to the
make and model of your device. Refer to the user’s manual included with
the AV device for more detailed instructions.
VCR
VCD
DVD
AV2
R
L
VIDEO
DC-IN
ANT
AV1
L
AV2
R
VIDEO
DC-IN
ANT
B
R
W
Y
AV
connectors
S-Video
connector
AV2
Cables and connectors are color-coded
(black, red, white, yellow).
4-IN-1 cable
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Video Camera
The following illustration shows you how to connect the TV to a camcorder.
Actual connections may vary according to the make and model of the
device. Refer to the user’s manual included with the camcorder for more
detailed instructions.
S
WB
AV2
R
L
VIDEO
DC-IN
ANT
AV1
L
AV2
R
VIDEO
DC-IN
ANT
S-Video
connector
AV2
B
R
W
Y
4-in-1 cable
AV connectors
Note: When connecting the
S-Video connector and AV
connectors at the same time,
the priority is given to the S-
Video connector.
Cables and connectors are color-
coded (black, red, white, yellow).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Headphones
Headphones may be used to listen to the TV instead of using the built-in
speakers. Connect headphones to the headphone line out port as
illustrated.
Headphones
AV2
R
L
VIDEO
DC-IN
ANT
Headphone
line out port
AV1
L
AV2
R
VIDEO
DC-IN
ANT
Notes
•
•
Headphones are not included with the product.
The internal TV speakers will not output sound when headphones are
plugged in.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Power Adapter
1
Connect the power cord to the power adapter as illustrated.
2 Plug the power adapter connector into the DC-IN on the rear panel of
the TV.
3 Plug the three-pronged plug at the other end of the power cord into a
power outlet.
Power outlet
Three-pronged
plug
AV2
R
L
VIDEO
DC-IN
ANT
Power cord
AV1
L
AV2
R
VIDEO
DC-IN
ANT
DC-IN
Power adapter
26
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Using the TV
Using the Remote Control
For best results, use the remote control within a distance of 5 meters (16
feet) from the front of the TV’s signal sensor. Do not exceed an angle of 30
degrees when pointing at the signal sensor. Refer to the following
illustration.
RCE
SOU
U
MEN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the TV On and Off
1
Press the POWER
button on the
remote control or on the TV control
panel. The power LED indicator on
the front of the TV changes from red
to green, indicating that the power is
on.
MENU
SOURCE
2 Press the POWER
button again.
The power LED changes from green
to red, indicating that the TV is in
standby (off) mode.
Power button
/Power LED
Selecting Channels
1
Press the CH UP button to increase
the channel number by one.
2 Press the CH DOWN button to
decrease the channel number by
one.
3 Enter the specific channel number
by pressing the number buttons on
the remote control. The channel is
displayed on the LCD panel.
MENU
SOURCE
Channel down
Channel up
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching Source Signals
Press the SOURCE button to select
different source signals.
CH, AV1, and AV2 appear on the top
right corner of the screen in that order.
Note
The TV supports S-Video input in addi-
tion to normal video and audio signals.
The TV detects the signal type automati-
cally and gives priority to S-video when
two signals are detected at the same
time.
MENU
SOURCE
Source
Adjusting the Volume
1
Press the VOL UP button to
increase the volume.
2 Press the VOL DOWN button to
decrease the volume.
3 Press the MUTE button. The word
“MUTE” appears on the top right
corner of the screen and sound is
turned off.
MENU
SOURCE
4 Press the MUTE button again to
restore the original volume.
Volume up
Volume down
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting On-Screen Display (OSD)
Settings
11
The On-Screen Display (OSD) menu system provides a quick and simple
method to adjust your TV's settings. This chapter describes how to change
each of the available settings. The OSD can be used with either the front
control panel or remote control.
Button Descriptions
Front Panel Control
Menu
MENU
CH UP
S
T
+
CH DOWN
VOL UP
VOL DOWN
–
The following sections explain how to adjust settings in the OSD menus
using the front panel control.You can also use the arrow buttons on the
remote control to adjust settings.
OSD Setting Menus
MAIN MENU
PICTURE
AUDIO
TV
CUSTOMIZE
MENU
MENU
SEL
ENTER
Press MENU to enter the OSD
The Main Menu appears.
Main Menu screen.
Note
Press the menu button to exit the OSD menus and submenus at any time.
Repeatedly press the MENU button to exit the OSD menus and submenus
and return to TV mode.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Setting
MAIN MENU
PICTURE
AUDIO
TV
CUSTOMIZE
MENU
MENU
SEL
ENTER
Press MENU to enter the OSD
Press the VOL UP button to enter
Main Menu screen.
the PICTURE Menu.
Note
You can operate the OSD with either the remote control or the front panel
control.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Brightness
1 Press the VOL UP button. The
PICTURE MENU
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
brightness slide bar appears.
0
30
0
0
0
SATURATION
COLOR
PRESET
NEUTRAL
MENU
SEL
ENTER
2 Press the VOL UP button to
increase the brightness.
BRIGHTNESS
+12
3 Press the VOL DOWN button to
decrease the brightness.
BRIGHTNESS
-12
4 Press MENU to confirm the setting
and return to the Picture Menu.
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
BRIGHTNESS
+12
0
-12
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Contrast
1
Press the CH DOWN button to select
PICTURE MENU
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
CONTRAST.
0
30
2 Press the VOL UP button. The
0
0
0
contrast slide bar appears.
SATURATION
COLOR
PRESET
NEUTRAL
MENU
SEL
ENTER
3 Press the VOL UP button to
increase the contrast.
CONTRAST
30
4 Press the VOL DOWN button to
decrease the contrast.
CONTRAST
5 Press MENU to confirm the setting
and return to the Picture Menu.
15
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
CONTRAST
30
15
1
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharpness
1
Press the CH DOWN button to select
PICTURE MENU
SHARPNESS.
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
0
30
2 Press the VOL UP button. The
0
0
0
sharpness slide bar appears.
SATURATION
COLOR
NEUTRAL
PRESET
MENU
SEL
ENTER
3 Press the VOL UP button to
increase the sharpness.
SHARPNESS
+8
4 Press the VOL DOWN button to
decrease the sharpness.
SHARPNESS
5 Press MENU to confirm the setting
and return to the Picture Menu.
-8
Note
The new setting is confirmed automati-
cally when the OSD times out.
MAX
MID
MIN
SHARPNESS
+8
0
-8
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Hue
1
Press the CH DOWN button to select
PICTURE MENU
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
0
30
HUE.
2 Press the VOL UP button. The hue
0
0
0
slide bar appears.
SATURATION
COLOR
PRESET
NEUTRAL
MENU
SEL
ENTER
3 Press the VOL UP button to
increase the hue toward the green
end of the spectrum. The image
becomes more green.
HUE
+24
4 Press the VOL DOWN button to
decrease the hue toward the red end
of the spectrum. The image
HUE
-24
becomes more red.
5 Press MENU to confirm the setting
and return to the Picture Menu.
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
HUE
+24
0
-24
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Saturation
1
Press the CH DOWN button to select
PICTURE MENU
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
0
30
SATURATION.
2 Press the VOL UP button. The
0
0
0
saturation slide bar appears.
SATURATION
COLOR
PRESET
NEUTRAL
MENU
SEL
ENTER
3 Press the VOL UP button to
increase the saturation.
SATURAATION
+24
4 Press the VOL DOWN button to
decrease the saturation.
SATURAATION
-24
5 Press MENU to confirm the setting
and return to the Picture Menu.
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
SATURATION
+24
0
-24
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Color
1
Press the CH DOWN button to
PICTURE MENU
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
0
30
0
0
0
select COLOR.
2 Press the VOL UP button. The
current setting appears blinking in
the brackets.
SATURATION
COLOR
PRESET
NEUTRAL
MENU
ADJ
Neutral Color
Press the VOL UP button to select
NEUTRAL, then press MENU.
PICTURE MENU
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
0
30
0
0
0
“NEUTRAL” appears in the brackets.
SATURATION
COLOR
PRESET
NEUTRAL
MENU
ADJ
Warm Color
PICTURE MENU
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
0
30
0
Press the VOL UP button to select
WARM, then press MENU. “WARM”
appears in the brackets.
0
SATURATION
COLOR
PRESET
0
WARM
MENU
ADJ
Cold Color
PICTURE MENU
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
0
30
0
Press the VOL UP button to select
COLD, then press MENU. “COLD”
appears in the brackets.
0
SATURATION
COLOR
PRESET
0
COLD
MENU
SEL
ENTER
Note
The default color temperature is
NEUTRAL.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset
1
Press the CH DOWN button to
PICTURE MENU
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
0
30
select PRESET.
0
2 Press the VOL UP button. “OK”
appears in the brackets. All picture
settings are returned to the factory-
set default values.
0
SATURATION
0
NEUTRAL
OK
COLOR
PRESET
MENU
SEL
ENTER
Note
The preset function erases all of your
custom picture settings.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Setting
MAIN MENU
PICTURE
AUDIO
TV
CUSTOMIZE
MENU
MENU
SEL
ENTER
1
Press the CH UP / DOWN
button to select AUDIO.
Press MENU to enter the OSD
Main Menu screen.
2 Press the VOL UP button to
enter the Audio Menu.
Note
You can operate the OSD with either the remote control or the front panel
control.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Treble
1 Press the VOL UP button. The
AUDIO MENU
treble slide bar appears.
TREBLE
BASS
0
0
BALANCE
ENHANCE
PRESET
0
ON
MENU
SEL
ENTER
2 Press the VOL UP button to
increase the treble.
TREBLE
+24
3 Press the VOL DOWN button to
decrease the treble.
TREBLE
-24
4 Press MENU to confirm the setting
and return to the Audio Menu.
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
Treble
+24
0
-24
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Bass
1
Press the CH DOWN button to select
BASS.
AUDIO MENU
TREBLE
BASS
BALANCE
ENHANCE
PRESET
0
0
0
ON
2 Press the VOL UP button. The bass
slide bar appears.
MENU
SEL
ENTER
3 Press the VOL UP button to
increase the bass.
BASS
+24
4 Press the VOL DOWN button to
decrease the bass.
BASS
5 Press MENU to confirm the setting
and return to the Audio Menu.
-24
Note
The new setting is confirmed automatically
when the OSD times out.
MAX
MID
MIN
Bass
+24
0
-24
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Balance
1
Press the CH DOWN button to select
AUDIO MENU
BALANCE.
TREBLE
BASS
BALANCE
ENHANCE
PRESET
0
0
0
ON
2 Press the VOL UP button. The
balance slide bar appears.
MENU
SEL
ENTER
3 Press the VOL DOWN button to shift
the balance to the left speaker.
BALANCE
-24
4 Press the VOL UP button to shift the
balance to the right speaker.
BALANCE
5 Press MENU to confirm the setting
and return to the Audio Menu.
+24
Note
The new setting is confirmed automatically
when the OSD times out.
LEFT
MID
RIGHT
Balance
-24
0
+24
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhance
1
Press the CH DOWN button to select
ENHANCE.
AUDIO MENU
TREBLE
BASS
BALANCE
ENHANCE
PRESET
0
0
0
ON
2 Press the VOL UP button to enter the
setting field.
3 Press the VOL UP button to turn
enhance on or off.
MENU
SEL
ENTER
4 Press MENU to confirm your choice.
Note
Turning Enhance on boosts the volume;
however, if the input signal is over
specification, audio distortion may occur.
Preset
1
Press the CH DOWN button to
AUDIO MENU
select PRESET.
TREBLE
BASS
0
0
2 Press the VOL UP button. “OK”
appears in the brackets. All audio
settings are returned to the factory-
set default values.
BALANCE
ENHANCE
PRESET
0
ON
MENU
SEL
ENTER
Note
The preset function erases all of your
custom audio settings.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setting
MAIN MENU
PICTURE
AUDIO
TV
CUSTOMIZE
MENU
MENU
SEL
ENTER
1
Press the CH UP
/
DOWN
button to select TV.
Press MENU to enter the OSD
Main Menu screen.
2 Press the VOL UP button to
enter the TV Menu.
Note
You can operate the OSD with either the remote control or the front panel
control.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
TV/CATV
Press the VOL UP button. The current
setting appears flashing in the
brackets.
TV MENU
TV/CATV
CATV
CH ADD/ERASE
AUTO PROGRAM
MENU
SEL
ENTER
Receiving Cable TV
TV MENU
TV/CATV
Press the VOL UP button to select
CATV, then press MENU. “CATV”
appears in the brackets.
CATV
CH ADD/ERASE
AUTO PROGRAM
MENU
+ADJ
Receiving Broadcast TV
TV MENU
Press the VOL UP button to select TV,
then press MENU. “TV” appears in the
brackets.
TV/CATV
CH ADD/ERASE
AUTO PROGRAM
TV
MENU
+ADJ
Note
The default TV setting is “CATV”.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Add/Erase
1 Press the CH DOWN button to
select CH ADD/ERASE.
TV MENU
TV/CATV
CH ADD/ERASE
AUTO PROGRAM
CATV
2 Press the VOL UP button. The OSD
menu display switches to the
following screen.
MENU
SEL
ENTER
3 Press the CH UP/ CH DOWN button
on the front panel to select a channel.
TV
43
CH UP/DOWN
-ERASE ADD+
MENU
Add Channel
Then press the VOL UP on the front
panel button to add the selected
channel. The channel number changes
from yellow into green after adding the
channel.
Erase Channel
Then press the VOL DOWN button on
the front panel to erase the selected
channel. The channel number changes
from green into yellow after erasing the
channel.
Note
You can still access the erased channel
by entering the channel number using
the number buttons on the remote
control. Add the channel again if it was
erased accidentally.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Program
1
Press the CH DOWN button to
TV MENU
select AUTO PROGRAM.
TV/CATV
CATV
CH ADD/ERASE
AUTO PROGRAM
MENU
SEL
ENTER
2 Press the VOL UP button to begin
auto programming. The screen
displays channels incrementally as
the TV scans for available
channels.
AUTO PROGRAM
TV 44
Note
The screen displays the first channel that
is successfully found after scanning is
completed.
.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Customize Setting
MAIN MENU
PICTURE
AUDIO
TV
CUSTOMIZE
MENU
MENU
SEL
ENTER
Press MENU to enter the OSD
1
Press the CH UP / DOWN
Main Menu screen.
button to select CUSTOMIZE.
2 Press the VOL UP button to
enter the Customize Menu.
Note
You can operate the OSD with either the remote control or the front panel
control
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Timer
The sleep timer turns the TV off automatically after a set time.
1 Press the VOL UP button to select
CUSTOMIZE MENU
SLEEP TIMER
a value: OFF, 30, 60, 90, or 120
minutes.
OFF
OSD TIMEOUT 20 SEC
LANGUAGE
ENGLISH
MENU
SEL
ENTER
2 Press MENU to confirm your
CUSTOMIZE MENU
SLEEP TIMER
OSD TIMEOUT 20 SEC
choice.
MIN
30
LANGUAGE
ENGLISH
MENU
+ADJ
30SLEEP
60SLEEP
90SLEEP
120SLEEP
You can also press SLEEP on the
remote control to select 30, 60, 90 or
120 minutes. The setting appears on
the TV screen.
The remaining time is updated every
10 minutes on the display. During the
last minute, the sleep timer flashes.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Timeout
This setting allows you to set the length of time the OSD menus appear on
the screen when a button is not pressed.
1
Press the CH DOWN button to select
CUSTOMIZE MENU
SLEEP TIMER
OSD TIMEOUT.
OFF
OSD TIMEOUT 20 SEC
2 Press the VOL UP button. The
current setting appears flashing in
the brackets.
LANGUAGE
ENGLISH
MENU
+ADJ
3 Press the VOL UP button to select a
value: 20, 40, or 60 seconds.
4 Press MENU to confirm your choice.
Language
1
Press the CH DOWN button to select
CUSTOMIZE MENU
SLEEP TIMER
LANGUAGE.
OFF
OSD TIMEOUT 20 SEC
2 Press the VOL UP button. The
current setting appears flashing in
the brackets.
LANGUAGE
ENGLISH
MENU
SEL
ENTER
3 Press the VOL UP button to select
ENGLISH or CHINESE.
4 Press MENU to confirm your choice.
MENU
Note
The default language setting is Traditional
Chinese.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Taking Care of Your TV
Turn the power off before you begin cleaning the
TV.
For best results, use a clean lens cloth to
remove dust and fingerprints from the screen.
Do not wipe the shell of the TV with alcohol,
methanol, gasoline or oil products to avoid
damaging the finish. Wipe the shell with a dry
soft cloth and use neutral cleaning fluids.
GAS
OIL
If your model has leather components, wipe the
leather parts with a dry cloth and keep the area
dry. Place the TV far from sources of steam to
avoid making the leather wet.
Be careful to remove the power plug correctly.
Hold the plug instead of pulling the power cord.
Arrange the power cord with other cords to avoid
knotting or bending which may cause fire due to
damage or electric leakage.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Troubleshooting
Situation
Solution
•
•
Connect the power cord properly.
Press the POWER button on the con-
trol panel or remote control.
Press the SOURCE button to cycle
through connected video sources.
Press the Channel up or Channel
down button to switch to other TV
stations.
•
•
No picture and sound.
•
•
Check the TV/CATV OSD settings.
Make sure all cables are connected
properly.
•
•
Check the antenna and cable connec-
tions.
Adjust the brightness in the OSD
menus. See “Brightness” on page 32.
No picture, or poor picture,
sound is OK.
•
Adjust the saturation in the OSD
Picture is not in color.
•
•
Press the Volume up button on the
control panel or remote control.
Make sure the MTS option is set to
MAIN or MONO.
Picture is OK, no sound.
One of the speakers has no
sound.
•
•
Adjust the balance in the OSD
menus. See “Balance” on page 42.
Try the Auto Program function in the
OSD “TV Setting” menu. See “Auto
Can’t receive some TV chan-
nels using cable TV.
•
Use the Preset function in the OSD
Picture and Audio menu.
Want to reset TV settings.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Situation
Solution
•
If OSD items are colored light blue,
the system is in a state such that
those settings are not available. For
example, video setting is available in
TV mode.
Cannot operate menus.
•
•
Make sure the video signal cable is
connected properly.
No image but have sound.
No sound but have image.
Make sure the source device is func-
tioning properly.
Set the volume to a higher level.
Make sure the audio cable is con-
nected securely.
•
•
•
•
Turn the mute off.
Make sure the video signal cable is
Screen image turns over.
connected
properly.
•
•
Adjust the location of the antenna,
placing it far from roads or sources of
interference.
Check the antenna and the video sig-
nal line connections.
Snow appears on the screen.
•
•
Readjust the sharpness setting.
Choose programs with high quality
signals.
Adjust the direction of the antenna or
change the video signal cable.
Blurred or overlapped
images.
•
53
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Specifications
ST49-10A1
LCD Panel Size
Aspect Ratio
9.6-inch TFT
4:3
Best Resolution
Maximum Display Area
TV System
800 (horizontal) x 600 (vertical)
194.4 mm (H) x 145.8 mm (V)
NTSC
AV1: Composite Video (RCA jack; yellow)
AV2: mini-DIN 10-pin (Composite + S-
Video)
Video System
AV1: L/R RCA jacks (audio input)
AV2: mini-DIN 10-pin L/R RCA jacks (audio
input)
Audio System
3.5 mm headphone jacks (audio output)
2W + 2W
Built-in stereo audio
amplifier
Power Supply
100~240V, 50/60 Hz, 12V DC
30W (Max.)
Power Consumption
Weight (including base)
1.9 KG
Dimensions (including
base)
255 mm (H) x 266 mm (W) x 123 mm (D)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Glossary
Aspect Ratio The ratio of width to height of a film, image or display screen.
Broadcast TV Broadcasting video signals using high-frequency electromagnetic
waves to distribute television channels to viewers (standard TV broadcast).
CATV Community Antenna Television, the original name for cable TV. A television
distribution system that uses coaxial cable instead of the traditional radio broad-
casting (over-the-air) method to deliver television, FM radio, and other services to
consumers.
Color Temperature Adjusting the color temperature enables you to set the inten-
sity of white light. Color temperature is measured in Kelvin (K). Higher color tem-
peratures result in a blue tint. Lower temperatures result in a red tint.
Hue Colors in a color system are measured by hue, saturation and luminance.
Hue indicates the predominant color.
LCD Liquid Crystal Display. A display technology that uses rod-shaped molecules
(liquid crystals) that flow like liquid and bend light.
MAIN is the default audio signal belonging to a particular channel.
MTS Multi-channel Television Sound. Enables reception of audio other than the
primary (MAIN) audio signal. SAP (Second Audio Program) enables reception of a
separate channel that may be a different language or completely different informa-
tion such as the news.
RCA connector An RCA or phono connector is a plug and socket for a two-wire
(signal and ground) coaxial cable that is widely used to connect audio and video
components. RCA sockets are commonly found at the rear of A/V equipment.
Saturation Chromatic purity indicating the amount of white contained in a color.
Fully saturated colors are pure colors; less saturated colors appear as pastel
shades.
S-Video Super-video, a video cabling standard used to transmit video by keeping
brightness (Y) and color information (C) on separate channels. Most often used
with camcorders, VCRs, and quality receivers and amplifiers to provide sharper pic-
tures.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
|