MAK-000050
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
2.1.1
Connecting the Power Cord and
2.2.2
Connecting an Amplifier
2.2.3
2.2.4
2.2.5
2.2.6
Connecting an Amplifier
Connecting a VCR/STB/DVD Player
Connecting a VCR/STB/DVD Player
Connecting a VCR/STB/DVD Player Using
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
2.5 Using the E-CARD Function
3.7 Setting Parental Controls
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
FCC Compliance Statement1
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Additional Information
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Warning: The Federal Communications Commission warns that
changes or modifications of the TV not expressly approved by the party
responsible for compliance could void your authority to operate the
equipment.
1. applies only to products purchased in the United States of America
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DOC Compliance Notice1
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This
device complies with Canada ICES-003 Class B.
CE Conformity Statement2
This device complies with the requirements set out in the Council
Directive on the approximation of the laws of the Member States relating
to Electromagnetic Compatibility (89/336/EEC) and the Amendment
Directive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the
Amendment Directive (93/68/EEC).
1. applies only to products purchased in Canada
2. applies only to products purchased in the European Union
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of Warning Symbols
Before You Proceed
1. Read all Safety Notices and instructions in this User’s Manual
carefully before either plugging in or turning the TV on.
2. Keep this User’s Manual in a safe place for future reference.
Keep the box and packaging in case the TV needs to be shipped
in the future.
3. Follow the TV and warning label instructions.
4. Any uses, operations, changes, alterations or modifications of
the TV that do not follow the instructions in this manual will void
this TV’s warranty.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
CAUTION
This symbol is used to alert
users to pay attention to
important descriptions
regarding usage, maintenance
(repair), and additional
important information related
to this TV.
This symbol is used to alert
users to the risk of electric
shocks due to dangerous and
uninsulated components.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Notices
Installation Safety Notes
Antenna
We suggest that you use an outdoor antenna to get the best signal
possible unless you have cable TV or a centralized indoor antenna
system. You may, however, use an antenna indoors if it is placed in a
location free from interference.
Location
Avoid allowing the TV to get prolonged exposure to sunlight or other
strong sources of heat. Leave sufficient distance between the TV and
the wall to provide enough space for the emission of heat.
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
Power
The packaged power cord is used for 110V power source. To
reduce the risk of fire, do not plug the power cord into an outlet with
voltage over 110V.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1
2
3
4
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
5
6
7
8
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install
in accordance with manufacturer’s
instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding-type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
NOTE: Applies to US only.
10 Protect the power cord from being walked on
or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified
by the manufacturer.
12 Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning
storms or when unused for long periods of
time.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
These servicing instructions are for use by
qualified service personnel only.To reduce
the risk of electric shock, do not perform any
servicing other than that contained in the
operating instructions unless you are
qualified to do so.
CAUTION
Notes:
•
The LCD TV is for entertainment use only and visual display tasks
are excluded.
•
This device uses a VGA connector to connect to a PC. To reduce the
influence of mains frequency on the source signal, use a VGA
monitor cable with ferrite shield.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal Safety
1. To avoid overloading the power supply, never plug too many
electrical devices into an outlet, power strip, or extension cable.
2. Dangerous high-voltage electric power components are located
inside the TV. To avoid electric shock, do not disassemble the
casing.
3. Do not place or drop metals, small objects, or flammable materials
in the vent of the TV.
4. If the TV is dropped, falls down, or is otherwise damaged, unplug
the power cord immediately and contact an authorized service
technician.
5. If any fluid is sprayed or dropped into the TV, contact an
authorized service technician.
6. The screen of the TV is made of glass. Avoid hitting or scraping it.
If the screen is broken, do not touch the broken glass.
7. Do not allow children to use the TV unattended.
8. Be careful when disconnecting the power plug. Hold the plug. Do not
attempt to disconnect the plug by pulling on the power cord.
Installation
1. Do not place the TV in locations where there is excessive steam or
dust.
2. Avoid blocking the TV's vents, do not place the TV on a bed, sofa,
carpet, or in a sealed cabinet.
3. Install the outdoor antenna away from power transmission lines to
avoid possible danger.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Thank you for purchasing a Hannspree Liquid Crystal Display Television
(LCD TV). Your new TV will allow you to enjoy superior audio and video
while enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using
or operating your TV. To ensure the safe and correct installation and
operations of the TV, it is important that the safety and operation
instructions in this manual are followed.
This instruction manual is designed to assist you in setting up and using
the TV. The information in this manual has been carefully checked for
accuracy; however, no guarantee is given to the correctness of the
contents. The information in this manual is subject to change without
notice.
To the extent allowed by applicable law, Hannspree Inc. (“Hannspree”)
shall not be liable for direct, indirect, special, exemplary, incidental or
consequential damages arising from any defect or omission in this
manual, even if advised of the possibility of such damages in advance.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright
© Copyright 2005 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and
distributed under licenses restricting its use, copying and distribution.
No part of this manual may be reproduced in any form by any means
without the prior written authorization of Hannspree. The TV described
in this manual may include copyrighted software of Hannspree (or other
third parties). Hannspree (or other third parties) preserves the exclusive
rights for copyrighted software, such as the right to distribute or
reproduce the copyrighted software. Accordingly, and to the extent
allowed by applicable law, any copyrighted software contained in the
product described herein shall not be distributed, modified, reverse
engineered, or reproduced in any manner without the prior written
authorization of Hannspree (or of other third parties).
The Hannspree logos presented herein are trademarks of Hannspree.
All other product names, trademarks or logos mentioned herein are
used for identification purpose only, and may be the trademarks or
registered trademarks of their respective owners.
The purchase of the product described herein shall not be deemed to
grant, either directly or by implication, estoppel or otherwise, any
license under the copyrights, patents, patent applications or trademarks
of Hannspree, except for the normal, non-exclusive use that arises by
operation of law in the sale of a product.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BBE, SRS, HDMI License Statements
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under one or more of
the following US patents: 5510752, 5736897. BBE
and BBE symbol are registered trademarks of BBE Sound, Inc.
BBE ViVA HD3D (High Definition 3D) Sound provides musically
accurate natural 3D images with Hi-Fi sound. The clarity of the sound is
improved by BBE while the width, depth and height of sound image are
expanded by BBE's proprietary 3D sound process. BBE ViVA HD3D
Sound is compatible with all TV programs including news, music,
dramas, movies, sports and electronic games.
is a trademark of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from SRS
Labs, Inc.
Hannspree products incorporate High-Definition
Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Getting Started
1.1 Package Contents
Make sure the following components are included in the box. Please contact
Hannspree Customer Service immediately if anything is missing or
damaged.
•
•
•
•
•
•
•
TV
User’s manual
Quick start guide
Warranty and service manual
Power cord
Remote control and batteries
A/V cable kit
14
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Introducing the TV
You can watch NTSC broadcast or cable television channels, and easily
connect a VCR, STB or DVD player to the standard CVBS and S-Video
input ports located at the rear and/or side of the unit. You can also use the
TV as a monitor for your PC by connecting it through the D-sub port.
Convenient control buttons located on the TV and a handy remote control let
you change channels, adjust the volume, and change display settings
through an easy-to-use on-screen display menu system. The built-in stereo
speakers provide full rich sound and a convenient audio output port lets you
connect to an external audio system or earphones.
1.2.1 Features
•
•
Built-in analog and digital (for
US and Canada only) TV tuner
•
Multi-channel Television Sound
(MTS) with SAP
Audio/Video support:
– Stereo audio inputs
– Composite video inputs
– Component video inputs
– S-Video inputs
– 3.5 mm stereo headphone
output
– VGA input
•
•
Built-in stereo speakers
Image Enhancement
Technology
– 3:2 pull down
– 3D Comb Filter
•
•
•
•
Noise Reduction
Advanced de-interlacing
Edge Enhancement
– HDMI input
– SPDIF (optical) out
– R/L/Subwoofer (2.1ch) out
Memory card reader (support
CF, MD, SM, SD, MMC, and
MS-Pro cards)
•
On-Screen Display (OSD) menu
system
Note:
The supporting devices mentioned in this manual may vary on different
models. For more information, please refer to the manufacturer’s user
manual or the Quick Start Guide of your TV model.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2.2 Control Panel
Description
Icon
Function
Power/ Power
LED
Turns the TV on and off.
Indicates power status.
POWER
Selects the input source to be
displayed (TV, DTV, AV1, AV2, AV3,
AV4, AV5, AV6(PC), AV7(HDMI), AV8
(E-CARD)).
SOURCE
Source
Notes:
•
DTV is available for U.S. and
Canada only.
•
AV8 is available on selected
models only.
Turns the On-Screen Display (OSD)
menu on and off.
MENU
Menu
CH
Change channels. Press
to
increase the channel number.
CH
CH
CH
Select channel
Press
to decrease the channel
number.
VOL+
Press
to increase the audio
to decrease the audio
volume.
VOL
VOL+
Adjust volume
VOL
Press
volume.
Insert a Compact Flash (CF), Micro
drive (MD), Smart Media (SM),
Secure Digital (SD), Multi Media Card
(MMC), or Memory Stick (MS-Pro)
card into this slot to view the contents
of the memory card. Use the E-CARD
mode to view the contents.
Memory card
slots
16
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2.3 Input and Output Jacks
Description
Connector
Function
Use the AV1 input to connect
an external device, such as a
VCR, STB, or a DVD player
with a composite output.
Audio Input (R/L): red and
white audio cables.
AV1
(R/L/V)
Video Input (V): yellow
(video) cable.
Use the AV2 input to connect
an external device, such as a
VCR, STB, or a DVD player.
Audio Input (L/R): white and
red audio cables.
AV2
(S/V/L/R)
Video Input (S-Video or
Video): S-Video cable or
yellow (video).
Use the AV3 input to connect
an external device, such as a
VCR, STB, or a DVD player.
Audio Input (R/L): red and
white audio cables.
AV3
(R/L/S)
Video Input (S): S-Video
cable.
Use the AV4 / AV5 inputs to
connect an external device,
such as a VCR, STB, or a DVD
player with a component
output.
AV4 / AV5
(R/L/Y/Pb/Pr)
Audio Input (R/L): red and
white audio cables.
Video Input (Y/PB/PR): video
cables.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Connector
Function
ANT (Antenna/
Cable TV line in)
Connects to an antenna or
CATV cable television line.
Connects to an ATSC antenna
such as a digital TV cable
system.
ANT (RF-in
digital)
Connects to the included
power cord.
AC IN
AV6 (PC)
Connects to a PC’s VGA port.
Connects to devices such as a
DVD player or set-top box.
AV7 (HDMI)
Connects to a PC's line/audio
out port.
LINE IN
Connects to external audio
amplifier.
LINE OUT (R/L)
SUBWOOFER
OUT
Connects to a subwoofer
speaker with audio amplifier.
EARPHONE OUT
RS-232
Connects to earphones.
For factory use only. Not
available for users.
Use the optical digital out
connector to connect an audio
decoder or audio/video
processor.
OPTICAL OUT
18
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2.4 Remote Control
Description
Icon
Function
Press this button to turn the On-
Screen Display (OSD) menu on and
off.
Menu
Menu
Press S / T / W / X to scroll
through the on-screen display
menus. In memory card mode, press
the arrow buttons to navigate menus,
or to pan a picture when zooming in
on a photo in Photo mode.
Arrow
Use to select a channel directly.
Press 0-9 to enter the channel
number (press 1 and 0 for channel
10). You can key in the alphabet in
channel name editing function.
Numbers 0 ~ 9
Press this button to return to the last
channel selected. In memory card
mode, press this button to start and
end the slideshow.
Recall
Press this button to enable the
closed captions/subtitles (Only
available in the United States of
America). In memory card mode,
press this button to rotate a picture
when in Photo mode.
CC
CC
Press this button to turn the TV
power on or off.
Power
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Icon
Function
Press VOL + to increase the audio
volume. Press VOL - to decrease the
audio volume.
Adjust volume
Press this button to eliminate sound.
Press mute again or press the
volume adjust buttons to restore
sound.
Mute
Changes channels. Press CH S to
increase the channel number. Press
CH T to decrease the channel
number.
Select channel
MTS
Press this button to change the multi
sound selection of the TV channel.
Press this button to switch between
wide screen and other modes (4:3 –
16:9 – Zoom). (Panoramic mode is
available only for selected models.)
In memory card mode, press this
button to stop proceeding operation.
Wide
Wide
Hold
Press this button to hold. In memory
card mode, press this button to go to
the next track or picture.
Hold
Press these buttons to select or
store your favorite channels. (e.g. To
set Ch. 33 as FAV1, go to Ch. 33 and
Hold
Favorite
press
, and then press
to
save your settings.)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Icon
Function
Press this button to select TV source
mode. Press this button again to
enter DTV mode (available only for
selected models).
TV
Press this button to display the AV
source list on the screen.
Source
Press this button to execute the
selection or setting and return to the
last menu when using on screen
display menus. In memory card
mode, press this button to confirm a
selection or play/pause the file
playback.
OK
Press this button repeatedly to set
the length of time until the TV turns
off. Cancel the timer by pressing
until the displayed time disappears.
In memory card mode, press this
button to zoom in a picture
(magnification varies by input
format).
Sleep
Press this button to show messages
on the screen, such as the channel
number, mode and others. Press this
button again to close the displayed
message.
Display
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Icon
Function
Press this button to view the
electronic program guide (EPG)
(available only for selected models).
In memory card mode, press this
button to toggle between the EQ
mode for music or the slideshow
mode for photo.
EPG
Electronic
Program Guide
Press this button to display
information about the current
channel (available only for selected
models). In memory card mode,
press this button to repeat the
playing operation.
Info
Twin
Swap
DTV Information
Twin Mode
Swap
Press this button to activate the
picture by picture mode (available
only for selected models). In memory
card mode, press this button to
return to the previous file.
Press this button to swap the
activation of the primary and
secondary sources for Twin mode
(available only for selected models).
In memory card mode, press this
button to fast rewind.
In memory card mode, press this
button to fast forward.
Fast Forward
Note:
The four color buttons (red, green, yellow, and blue) act as favorite
channel function when the TV standard is set to NTSC.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2.5 Inserting the Remote Control Batteries
1
Open the battery compartment
cover at the back of the remote
control (A).
2 Insert the batteries paying
attention to the polarity
markings inside the battery
compartment (B).
3 Replace the battery
compartment cover (C).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
•
•
•
If the remote control is not used for a long period, remove the batteries
and store them properly.
Handle damaged or leaking batteries carefully, and wash hands with
soap if they come in contact with leaked chemical fluids.
If your remote control has two batteries, do not mix new and old
batteries or the life of the new batteries will be shortened. Chemical
fluids may leak from the old batteries.
•
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
•
•
Refer to your local recycling or waste disposal rules and contact a local
waste disposal vendor to dispose of used batteries.
The remote control cover may have a magnet in it, so do not place
magnetic sensitive items such as watches, credit cards, or flash media
close to the cover.
•
Do not use force when pulling the remote control cover open; you may
damage the hinge.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Setting up your TV
2.1 Basic Connections
The following sections provide users with some basic instructions to use the
TV. Please read them carefully before you start utilizing the functions.
2.1.1 Connecting the Power Cord and Turning On
1
Connect the power cord to AC IN input jack on the rear panel of the
TV.
2 Insert the plug at the other end of the power cord into a power outlet.
3 Move the Main Power Switch to the ON position to supply power to
the TV.
Note:
If the TV is not going to be used for a long period, turn off the main power
switch.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1.2 Connecting an Antenna or Cable TV
1
Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT
Jack (RF-in Analog) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the antenna socket or CATV socket.
Antenna
ANT jack
(TV/CATV RF)
Ground
Clamp
Antenna/CATV
socket
Ground
coaxial cable
Notes:
•
If you cannot receive channels after connecting to an antenna or cable
•
RF-in digital input is available for built-in DTV models only.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Connecting External Devices
Connect external devices such as VCRs, STBs, or DVD players to the TV
using the AV1, AV2, AV3, AV4, and AV5 ports on the back or side of the TV.
2.2.1 Connecting External Earphones
External earphones may be used to listen to the TV rather than using the
built-in speakers. Connect external headphones to the earphone line out
port as illustrated.
Headphones
Speakers
Headphone
jack ( )
OR
Notes:
•
•
External earphones are not included with the TV.
The built-in TV speakers do not output sound when earphones are
plugged in.
•
Location of the connectors varies according to the TV model. For
more information, please refer to manufacturer’s user manual or the
the Quick Start Guide of your TV model.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.2 Connecting an Amplifier Using Analog Audio
Connect an external amplifier of speakers to the line out port to provide
better sound quality. Refer to the following illustration.
Subwoofer with
built-in amplifier
Amplifier and speakers
SUBWOOFER
IN
R
L
Audio cable
Cables and connectors are color-coded (red, white).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.3 Connecting an Amplifier Using Digital Audio
(Digital output is available for built-in DTV models only.)
Use the optical digital out connector to connect an audio decoder or
audio/video processor when using a Digital TV (ATSC) receiver.
Refer to the following illustration to connect optical digital out.
LINE
OUT
L-AUDIO-R
LINE
IN
Optical digital cable
Note:
The supporting devices mentioned in this manual may vary on different
models. For more information, please refer to the manufacturer’s user
manual or the Quick Start Guide of your TV model.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.4 Connecting a VCR/STB/DVD Player Using
Component Video
The illustration presented here shows how to connect your TV to a VCR /
STB / DVD player using the AV4/AV5 component video ports. Actual
connections may vary according to the make and model of your
device.
VCR
STB
DVD
Y
P
B
P
R
R
L
Video cable
Audio cable
Cables and connectors are
color-coded (red, white,
green, blue, red).
30
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.5 Connecting a VCR/STB/DVD Player Using
S-Video
The following illustration shows how to connect the TV to a VCR / STB /
DVD player using the AV3 S-Video port. Actual connections may vary
according to the make and model of the device.
Audio
S-Video
connectors
connector
S-VIDEO
R
L
Audio cable
Video cable
Cables and connectors are color-coded
(red, white, black).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.6 Connecting a VCR/STB/DVD Player Using
Composite Video
The illustration presented here shows how to connect your TV to a VCR /
STB / DVD player using the AV1 composite video port. Actual connections
may vary according to the make and model of your device.
VCR
STB
DVD
VIDEO
R
L
A/V cable
Cables and connectors are color-coded
(red, white, yellow).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.7 Connecting a Video Game Console
The following illustration shows how to connect the TV to a video game
console using the AV2 port. Actual connections may vary according to the
make and model of the device.
Audio/Video
connectors
S-VIDEO
VIDEO R
L
Audio/Video cable
Notes:
•
When connecting the S-Video connector and AV connectors at the
same time, the priority is given to the S-Video connector.
•
Location of the connectors varies according to the TV model. For
more information, please refer to the manufacturer’s user manual
or the Quick Start Guide of your TV model.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.8 Connecting a PC
Connect the TV to your PC to use it as the monitor using the D-Sub port as
shown. Connect the D-Sub port of the TV to the D-Sub output of the PC.
Connect the line out port of the PC to the line in port of your TV to listen to
audio from the PC.
PC
Audio cable
VGA cable
Notes:
•
•
Location of the connectors varies according to the TV model.
For more information, please refer to the manufacturer’s user manual or
the Quick Start Guide of your TV model.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.9 Connecting HDMI
HDMI (High Definition Multimedia Interface) with HDCP (High Definition
Copy Protection) assures that the best video signal is always sent from
source (HDTV signal, DVD player) to the TV.
Refer to the following illustration to connect an HDMI device to the TV.
DVD player
HDMI
output
R
L
Audio cable
HDMI cable
Note:
When the HDMI cable is connected, connecting the audio cable is not
necessary. However, it is necessary to do so if the HDMI-DVI-D adapter
cable is connected.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.10 Connecting Digital TV
1
Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT
Jack (RF-in Digital) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the antenna socket of the digital TV device.
DTV
Notes:
•
If you cannot receive channels after connecting to an antenna or cable
•
RF-in digital input is available for DTV built-in models only.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3 Inserting a Memory Card
1
Insert the memory card(s) into the appropriate card reader slot(s) on
the control panel of the TV as shown.
CF
I
/II
SD
/
MS
SM
2 Push the card(s) gently until they stop. Make sure the card(s) are
inserted in the correct way.
3 When inserted, the memory card(s) will protrude as shown.
CF
I
/II
SD
/
MS
SM
4 To remove a card, pull it from the card slot.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
•
To prevent data loss, end tasks that retrieve data from the memory card
before removing it from the card slot.
•
•
•
•
Use only certified memory cards.
Supports memory cards with a capacity of up to 1GB.
E-CARD related functions and file names are only shown in English.
Be careful when removing memory cards; removing them too quickly
may result in damage to the card and possible data loss.
•
Please refer the flash card website below:
SM CARD: http://www.ssfdc.or.jp/english/index.htm
SD CARD: http://www.sdcard.org/
CF CARD: http://www.compactflash.org/
MS CARD: http://www.memorystick.com/en/
MMC CARD: http://www.mmccard.org/
•
Supports play format: JPEG/MPEG, MPEGI/II, MP3, MPEG4.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 Using the TV
2.4.1 Using the Remote Control
For best results, use the remote control within a proper distance from the
front of the TV. Do not exceed an angle of 30 degrees when pointing at the
TV.
Notes:
•
The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
•
Aim the transmitter on the remote control at the signal sensor and
ensure that there are no obstacles between them.
2.4.2 Turning the TV On and Off
POWER
1
Press
on the remote control or
on the control panel. The
power LED indicator on the front of the TV changes from red to green,
indicating that the power is on.
POWER
2
Press
or
again. The power LED changes from green to red,
indicating that the TV is off
.
2.4.3 Selecting Channels
CH
•
Press CHS on the remote control or
on the control panel to
CH
increase the channel number by one. Press CHT or
to
decrease the channel number by one.
•
Enter the specific channel number by pressing the number buttons
on the remote control. The channel number is displayed on the
screen.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4.4 Switching Source Signals
SOURCE
Press
on the control panel or
on the remote control to select the
incoming source signal. A screen appears with all sources listed. (Some of
the sources are available only for selected models.)
Select Source
TV
DTV
AV1(Video)
AV2(F V/S-V)
AV3(S-Video)
AV4(HDTV1)
AV5(HDTV2)
AV6(PC)
AV7(HDMI)
AV8(E-card)
CH
CH
1
Press
S
or
T
on the remote control or
or
on the control
panel to select the source you wish to use.
SOURCE
2 Press
on the remote control or
on the control panel to
confirm the setting.
Menu
MENU
3 Press
on the remote control or
on the control panel to exit.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4.5 Adjusting the Volume
1
2
3
Press VOL+ to increase the volume.
Press VOL- to decrease the volume.
Press
to eliminate sound. A mute icon appears on the top left
corner of the screen and sound is turned off.
4
Press
volume.
again or press the volume buttons to restore the original
41
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5 Using the E-CARD Function (For built-in E-CARD
only)
The E-CARD function enables you to view photos, watch movies, and listen
to MP3 files on the memory card inserted in the card slot. The device
supports Compact Flash (CF), Micro drive (MD), Smart Media (SM), Secure
Digital (SD), Multi Media Card (MMC), and Memory Stick (MS-Pro) cards.
Use the E-CARD mode (AV8) to view the contents.
The following describes the E-CARD function:
1
Insert a memory card into the appropriate card slot. Refer to “Inserting
2 Press
on the remote control to display all available sources. Use
the S / T button on the remote control to switch source to AV8 (E-
CARD).
3 If more than one memory card is inserted to the card slots, a screen
displaying the inserted cards is displayed. Use the S / T button on
the remote control to select the memory card and press
the contents.
to view
SELECT ONE AND ENTER:
COMPACT FLASH
CF
SECURE DIGITAL
42
Download from Www.Somanuals.com. All Manuals Search And Download.
4 The E-CARD main screen appears. You can choose to view photos,
listen to music, watch videos, or look at the contents of the memory
card.
SELECT ONE AND ENTER:
PHOTO
MUSIC
VIDEO
FILE
E-CARD main screen
43
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.1
Remote Control Keys in E-CARD Mode
The following table lists the remote control buttons used to operate the E-
CARD feature.
Button
Description
Function
Press these buttons to navigate
the E-CARD menus.In Photo
mode, use these buttons to pan
a picture when zooming in.
Cursor up /
down / left /
right
Press this button to confirm a
selection or to play/pause a
music/video file.
Play / Pause
Stop
Press this button to return to the
E-CARD main screen. In Music
or Video mode, press to stop
playing back a file.
Wide
Press this button to start and
stop the slide show.
Slide Show
Zoom
Press this button to zoom in on
a picture. (Magnification varies
by input format).
CC
Press this button to rotate a
picture when in Photo mode.
Rotate
Press this button to play the
previous file on the memory
card.
Twin
Previous
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Description
Function
Hold
Press this button to play the
next file on the memory card.
Next
Press this button to toggle
between the EQ mode for music
or photo slideshow mode.
EPG
Effect
Info
Press this button to repeat the
playing operation.
Repeat
Swap
Fast rewind
Fast forward
Press this button to fast rewind.
Press this button to fast forward.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.2
Viewing Photos
1 When the E-CARD main screen appears, use the W / X button on the
remote control to select PHOTO.
SD
PAGE
01/01
2 Press
to display the thumbnails of images on the memory card.
3
Use the S / T / W / X button to select a thumbnail image.
4 Press
to expand the selected thumbnail to full screen mode.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Hold
5 Press the X / T /
button to go to the next picture. Press the W /
Twin
S /
button to go to the previous picture.
Note:
If the image is not in the standard size/resolution (i.e. 800x600, 1024x768),
it may appear deformed or with a blue/black background.
Zooming and Panning
The E-CARD function enables you to zoom in on images and pan the view.
Follow these instructions.
1
View an image in full screen mode as described in the previous
section.
2 Press
on the remote control to zoom in on the image.
(Magnification varies by input format).
When zooming in on an image, press the S / T / W / X button on the
remote control to pan the image.
Rotating Images
Follow these instructions to rotate images when in Photo mode.
1
View an image in full screen mode as described in the previous
section.
CC
2 Press
on the remote control.
3 The image is rotated 90 degrees (90°) in a clockwise direction.
Note:
You cannot rotate an image when the image is being zoomed.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing a Slide Show
The E-CARD function has a slide show feature that enables you to view all
the images by order.
1
Press
on the remote control to start the slide show.
The files are viewed sequentially, and files in your music library are
also played in sequence.
2 Press
again to stop the slide show.
To pause a slide show, press
on the remote control.
Info
3 Press
on the remote control to turn the repeat function on/off.
Folder Repeat mode has the following options:
– ON: runs the slide show again in the selected folder.
– OFF: turns the folder repeat mode off.
EPG
4 Transition: Press
on the remote control to choose different
transition effects when playing the slide show.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Transition Table
Transition
Description
Image appears full screen.
1
FULL SCREEN
2 ROLL: TOP TO
Image rolls in from top to bottom.
Image rolls in from bottom to top.
BOTTOM
3 ROLL: BOTTOM
TO TOP
4 ROLL:
Image rolls in from top and bottom to center.
TOP/BOTTOM TO
CENTER
5 ROLL: CENTER
Image rolls in from center to top and bottom.
Image rolls in blinds from top to bottom.
Image rolls in from left to right.
TO TOP/BOTTOM
6 BLIND: TOP TO
BOTTOM
7 ROLL: LEFT TO
RIGHT
8 ROLL: RIGHT TO
Image rolls in from right to left.
LEFT
9 ROLL:
Image rolls in from left and right to center.
LEFT/RIGHT TO
CENTER
10ROLL: CENTER
Image rolls in from center to left and right.
Image closes into center point.
TO LEFT/RIGHT
11 ROLL: IMPLODE
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Transition
Description
12BLIND: LEFT TO
Image rolls in blinds from left to right.
Image fades in and out.
RIGHT
13CROSS FADE
14SLIDE MODE:
Transition effects are chosen randomly.
RANDOM
50
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.3
Listening to Music
1 When the E-CARD main screen appears, use the W / X button on the
remote control to select MUSIC.
M U S I C L I B R A R Y
01.LE PAPILLON
3:08
4:37
2:52
3:29
4:27
4:32
1:45
2:30
02.
A
B
C
A
HOPE AND MEMORY
WE WILL ROCK YOU
Repeat: One
Page: 01/01
2 Press
. A screen appears displaying a list of the music stored on
your memory card.
3 Use the S / T / W / X button to select a music file. The selected file
starts playing. When the file finishes playing, the next file in the list is
played.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press
to display the Music Equalizer screen. This screen
enables you to view information about the file you are playing.
M U S I C E Q U A L I Z E R
Name: 02.MUSIC 2
Artist:
Time: 4:29
Type: MP3 128Kbps
Repeat: One
EQ:standard
Song:000/028
Repeat mode
Info
Press
to switch among the following repeat modes:
– ONE: repeats one file
– ALL: repeats all files in sequence
– OFF: turns repeat mode off
EQ mode
EPG
Press
to toggle EQ mode:
– Choose from Jazz / Rock / Pops / Ballad / Dance / Standard / Classic
52
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.4
Watching Videos
1 When the E-CARD main screen appears, use the W / X button on the
remote control to select VIDEO.
SD
PAGE
01/01
2 Press
. A screen appears displaying thumbnails of the videos on
your memory card.
3 Use the S / T / W / X button on the remote control to select a video
file.
4 Press
. The selected video file begins playing.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.5 Viewing Memory Card Files
1 When the E-CARD main screen appears, use the W / X button on the
remote control to select FILE.
F I L E L I B R A R Y
01.MUSIC 1
MP3
File size : 4212KBytes
Date :
MP3
MP3
02.MUSIC 2
03.MUSIC 3
04.CRIM0001
05.CRIM0002
06.CRIM0003
07.CRIM0004
08.CRIM0005
2006/01/01
Time :
4:29
Channels : Stereo
Bitrate : 128kbps
Folder : ROOT
SD
000/028
2 Press
. A screen appears displaying a list of the files on your
memory card. The file type is denoted by the icons, and the file size,
creation date, and thumbnail view of the file provides additional
information.
3 Use the S / T / W / X button to select a file and press
. The
selected file is displayed or played.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
2.6 Using the Digital TV (For built-in DTV only)
The built-in DTV function provides viewers to enjoy TV in many ways
through enhanced and interactive services that add to the viewing
experience.
2.6.1 Switching Signal Source
SOURCE
Press
on the control panel or
on the remote control to select the
incoming source signal. A screen appears with all sources listed. (Some of
the sources are available only for selected models.)
Select Source
TV
DTV
AV1(Video)
AV2(F V/S-V)
AV3(S-Video)
AV4(HDTV1)
AV5(HDTV2)
AV6(PC)
AV7(HDMI)
AV8(E-card)
CH
CH
1
Press
panel to select DTV.
S
or
T
on the remote control or
or
on the control
2 Press
on the remote control or
on the control panel to
confirm the setting.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
MENU
3 Press
on the remote control or
on the control panel to exit.
Note:
Use the Auto Search function to scan all available digital TV channels
before viewing digital TV programs for the first time.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
2.6.2 Searching for Digital Channels
Before you start viewing the digital TV programs, you must perform Auto
Search to scan for all available ATSC and cable channels on DTV source
signals.
Menu
Press
to enter the OSD Main Menu screen.
TV
Channel No
Edit Name
Skip
2
Off
Fine Tuning
Air/Cable
Auto Search
Preset
0
Cable
OK
CH
Select TV Menu
Select :
Enter :
Return :
SOURCE
VOL
1
Press
or the
button to enter the TV Menu.
or CHS/CHT button to select Auto Search.
2 Press the
57
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press
to start searching for all the available channels.
A banner appears on the screen showing the number of available
channels scanned.
ATSC
707
2
4 After searching all the channels, the last available channel
scanned is displayed on the screen. The Channel Banner
appears showing information of the current program.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Banner
The Channel Banner located at the bottom of the screen provides viewers
with basic information of the chosen channel and the currently broadcast
Info
program. Press
in normal viewing mode to display the Channel Banner.
7
1
2
9:00 AM
HD Programs or HD Demo material
6
5
9-1 KQED-HD
i
12:00AM - 2:00 AM Frontier House
Signal Quality
83
2:39 PM Mon 29 Apr 02
3
4
No. Item
Description
Up/Down
arrows
Appear when there is more than one channel
on the list.
1
The first two digits stand for the number of
available channels on the list. The two digits
after the dash stand for its order on the list.
2
3
Channel no.
Date/Time
Indicates current time.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
No. Item
Description
4
5
Next on
Indicates the next program and its schedule.
Quality
indicator
Indicates the signal quality. The better the
signal, the longer the bar.
Indicates additional information about the
program.
6
7
Icon
Displays the name and the staring time of the
program. The bar extending to the right shows
the elapsed time.
Current
program
Note:
The content in the channel banner is sent by the broadcaster. Information
that is displayed may vary from broadcaster to broadcaster.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
The following table describes the definition of the icons displayed in the
Channel Banner.
Icon
Description
Indicates that the channel has been set as one
of the favorite channels. The color of the face
mark corresponds to the color of the favorite
key on the remote control.
Indicates that the program is under parental
rating.
Indicates that extended information is available
for the program.
Indicates that the channel is digital standard.
Indicates that the channel is digital high
definition.
Indicates that AC3 is available for the program.
Indicates that alternative soundtracks are
available for the program.
Indicates that closed captions are available for
the current program.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
2.6.3 Digital Customize Settings
Menu
Press
to enter the OSD Main Menu screen.
CUSTOMIZE
Menu Language
Menu Background
Sleep Timer
English
Transparent
Off
Closed Caption
Audio Language
Time Zone
CS1
English
Central,Summer
Advanced C.C.
Preset
OK
CH
Select Customize Menu
Select :
Enter :
Return :
VOL
SOURCE
1
2
Press
Press
or
or
to enter the CUSTOMIZE Menu.
or CH CH button to select an option.
to change the mode setting.
S/
T
3 Press
4 Press
to select the changed setting and return to the
CUSTOMIZE Menu.
Menu
5 Press
to exit the CUSTOMIZE menu.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
The Customize Mode menu includes the following options.
Option
Description
S
•
•
elect from the following language options:
English
Español
Français
Menu Language
•
Note:
OSD language may vary from region to region.
Menu
Background
Enables you to set the OSD background to be
transparent or solid.
Enables you to set the TV to turn off after a set
time. Select from the following sleep timer
options.
•
•
•
•
•
120 minutes
90 minutes
60 minutes
30 minutes
Off
Sleep Timer
You can also press
on the remote control to
again to reset the
enable sleep mode. Press
timer.
Enables closed captions. Select from the
following options:
Closed Caption
Audio Language
•
CS1 ~ CS6
S
•
•
•
•
elect from the following audio language options:
English
Spanish
French
German
Italian
•
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
Enables you to select the specific time zone for
your area.
Time Zone
Enables you to configure settings for font type,
size, style, color, opacity, edge, edge color,
background color, and background opacity of
closed caption.
CUSTOMIZE
C.C.Font Type
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
C.C.Font Size
C.C. Font Style
C.C. Font Color
C.C. Font Opacity
C.C. Font Edge
Advanced C.C.
C.C. Font Edge Color
C.C. Background Color
C.C. Background Opacity
OK
CH
Select Customize Menu
Select :
Enter :
Return :
VOL
SOURCE
Note: This function is only available when Closed
Caption value is set to CS1 ~ CS6.
Erases all customized settings and return all
values to factory defaults.
Preset
64
Download from Www.Somanuals.com. All Manuals Search And Download.
2.6.4 Using the Electronic Program Guide (EPG)
The Electronic Program Guide (EPG) provides viewers a quick glance at the
program schedule and information for all available channels. The Navigator
displays the channel list on the left column and the programs broadcast on
the current channel for the day and the six following ones.
ALL CHANNELS
WHAT IS ON TODAY?
2:41 PM Mon 29 Apr 02
HD Programs or HD demo material
9-1 KQED-HD
9-2 KQED-SD
2:00 AM - 6:00 AM
Frontier House
i
12:00 AM - 2:00 AM
CH+
Last
Page:
24h-
24h+
Channels:
Exit:
CH-
Program list
Channel list
EPG
1
Press
to display the Navigator window.
or button to select a specific channel from the channel
2 Use
list.
3 Press
to enter the program list of the selected channel.The
program currently being broadcast on the selected channel is
highlighted.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press
or
button to select programs from the list. And press
to display extended information of the selected program.
5 Press
to exit EPG and return to the broadcast program screen.
Notes:
•
Data displayed in EPG is updated in real time. Current broadcast
program disappears from the list when the program has ended.
•
EPG information will vary from region to region depending on the
broadcasters and/or CATV system in your area.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control in Navigator
Button
Description
Press to tune to selected channels.
EPG
Press to toggle between Navigator and the
normal viewing mode.
Press to change the soundtrack.
CC
Press to turn the closed caption on and off.
Press to display the Program Info window.
Info
Press to shift focus up/down and tune the
highlighted channel.
Press to switch between program list and
channel list.
Press to return to normal viewing mode.
Press to change the day.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Program Information
Info
Press
to view program information for the selected program. A window
pops up to display a brief introduction of the chosen program and its
broadcast schedule.
CC
1
HD Signal Quality
83
2:39 PM Mon 29 Apr 02
Info
•
If the information exceeds one page, press
again to go to the
next page of the Program Information window. In the last page, press
Info
closes the Program Information window.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Press
to exit the Program Information window and return to the
normal viewing mode.
Extended Info
No program info available
No program info available
CC
1
HD Signal Quality
83
2:39 PM Mon 29 Apr 02
Note:
The message “No information is available for the selected program” is
displayed in the center of the window if no program information is
broadcast for the chosen program.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple
method to adjust the TV settings. This chapter describes how to change
each of the available settings. The OSD menu can be accessed through the
buttons either on the front control panel or the remote control.
Function
OSD Menu
Up
TV Control Panel
MENU
Remote Control
Menu
CH S
S / CH S
Down
CH T
T / CH T
Add/Enter
Decrease
Return
VOL+
X / VOL+
VOL-
W / VOL-
SOURCE
OK / Source
3.1 OSD Setting Menus
Menu Icon Description
Enables you to make adjustments to picture settings such as
brightness, contrast, saturation, sharpness, hue, and create
custom configurations.
VIDEO
AUDIO
PC
Enables you to adjust audio characteristics such as bass
and treble, and also enables enhanced audio options
such as Surround.
In PC mode, enables you to set characteristics such as
phase and clock.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Enables you to choose TV or CATV, autoscan for
channels, add and delete channels, and edit channel
names.
TV
Enables you to set the OSD language, set the sleep timer
and enable closed captions.
CUSTOMIZE
Enables you to set parental controls to prevent
unauthorized access to certain TV content (available in
the US and Canada only).
PARENTAL
Notes:
Menu
MENU
•
•
Press
/
to exit the menus at any time.
You can control the OSD with either the remote control or the TV
control panel.
•
The new setting is confirmed automatically when the OSD times out.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Adjusting Video Settings
Menu
Press
to enter the OSD Main Menu screen.
VIDEO
Video Mode
Brightness
Contrast
Standard
50
50
50
50
0
Saturation
Sharpness
Hue
Noise Reduce
Color Temperature
Back Light
Preset
Off
Neutral
High
CH
MENU
Select Video Menu
Select :
Enter :
Return :
VOL
1
Press
Press
or
to enter the VIDEO Menu.
or CHS/CH button to select an option.
to change the mode setting.
2
T
3 Press
or
4 Press
to select the changed setting and return to the VIDEO
to exit the VIDEO menu.
Menu.
Menu
5 Press
72
Download from Www.Somanuals.com. All Manuals Search And Download.
The Video Mode menu includes the following options.
Option
Description
Enables you to customize the video display. The
following options are available:
Vivid
Sets the display for enhanced picture
contrast and saturation.
Video Mode
Standard Sets the display for normal viewing
(default).
Custom
Enables you to set user defined
values.
Brightness
Contrast
Brightens or darkens the picture.
Increases or decreases the contrast. Increasing
the contrast makes the colors deeper. Decreasing
the contrast makes the colors softer.
Saturation
Sharpness
Hue
Adjusts the intensity of the color.
Sharpens or softens picture clarity. Decrease this
value to make the pictures softer.
Increases or decreases the red tint.
Noise reduction enables you to reduce the
amount of interference in the signal. The following
options are available:
•
•
•
•
High
Middle
Low
Noise Reduce
Off
Note:
Noise reduction only works in TV and AV1 ~ AV3
modes.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
Color temperature refers to the warm or cool
feeling of a color, rather than actual temperature.
The following options are available:
Color
Temperature
Cold
Neutral
Warm
Gives white colors a bluish tint.
Gives white colors a neutral tint.
Gives white colors a reddish tint.
Sets the LCD backlight. Set this to low to
conserve power.
Back Light
Preset
Erases all customized picture settings and returns
all values to factory defaults.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Adjusting Audio Settings
Menu
Press
to enter the OSD Main Menu screen.
AUDIO
0
Balance
Sound Effect
Equalizer
120Hz
OFF
OFF
0
0
0
0
0
0
0
200Hz
500KHz
1.2KHz
3KHz
7.5KHz
12KHz
Preset
CH
MENU
Select Audio Menu
Select :
Enter :
Return :
VOL
1
Press
Press
or
to enter the AUDIO Menu.
or CHS/CH button to select an option.
button to change the mode setting.
2
T
3 Press
or
4 Press
to select the changed setting and return to the AUDIO
Menu.
Menu
5 Press
to exit the AUDIO menu.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
The Audio Mode menu includes the following options.
Option
Description
Changes the balance between the left and right
speakers.
Balance
Toggles between the TruSurround XT and BBE
ViVA HD3D sound features.
Sound Effect
Equalizer
Preset
Enables you to adjust equalizer settings. Select
Custom to adjust individual equalizer frequencies.
•
•
•
•
LIVE
POP
ROCK
CUSTOM
Erases all customized audio settings and return
all values to factory defaults.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Adjusting PC Settings
If a PC is connected, the PC mode menu items become available.The PC
Mode menu includes the following options.
Menu
Press
to enter the OSD Main Menu screen.
PC
H Position
V Position
Phase
50
50
50
50
Clock
Auto Adjust
Preset
CH
MENU
Select PC Menu
Select :
Enter :
Return :
VOL
1
Press
Press
or
to enter the PC Menu.
or CHS/CH button to select an option.
button to change the mode setting.
2
T
3 Press
or
4 Press
to select the changed setting and return to the PC
Menu.
Menu
5 Press
to exit the PC menu.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
The PC Settings menu includes the following options:
Option
Description
Press
or
to adjust the horizontal
H Position
position of the display.
Press
of the display.
or
to adjust the vertical position
V Position
Phase
Clock
Press
Press
Press
or
or
to adjust the phase timing.
to adjust the clock timing.
to allow the TV to adjust the display
Auto Adjust
Preset
automatically for best results.
Press
to erase all customized PC settings
and return all values to factory defaults.
Note:
The display resolution is based on the PC input signal.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Adjusting TV Settings
Menu
Press
to enter the OSD Main Menu screen.
TV
Channel No
Edit Name
Skip
2
On
Fine Tuning
Air/Cable
Auto Search
Preset
0
Cable
CH
MENU
Select TV Menu
Select :
Enter :
Return :
VOL
1
Press
Press
or
to enter the TV Menu.
or CHS/CH button to select an option.
to change the mode setting.
2
T
3 Press
or
4 Press
to select the changed setting and return to the TV
Menu.
Menu
5 Press
to exit the TV menu.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
The TV Mode menu includes the following options.
Option
Description
Channel No
Use to select a channel to adjust its settings.
Use the alphanumeric keypad on the remote
control to enter a name for the channel.
Edit Name
You can use up to five alphanumeric characters for
the name.
Select ON to remove the selected channel number
from the channel list. Select OFF to add the
selected channel number to the channel list.
Skip
Select this item and press
or
to fine tune
Fine Tuning
a channel for better picture quality.
Enables you to select the TV source signal. The
following options are available:
Air/Cable
Air
Selects the antenna.
Selects cable TV.
Cable
Press
to have the TV automatically scan
through all the available channels and assign
channel numbers to them.
Auto Search
Preset
157.25
20
Select this to erase all customized TV settings and
return all values to factory defaults.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 Making Customize Settings
Menu
Press
to enter the OSD Main Menu screen.
CUSTOMIZE
Menu Language
Menu Background
Sleep Timer
English
Transparent
OFF
Closed Caption
Preset
OFF
CH
MENU
Select Customize Menu
Select :
Enter :
Return :
VOL
1
2
Press
Press
or
or
to enter the CUSTOMIZE Menu.
or CHS/CH button to select an option.
to change the mode setting.
T
3 Press
4 Press
to select the changed setting and return to the
CUSTOMIZE Menu.
Menu
5 Press
to exit the CUSTOMIZE menu.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
The Customize Mode menu includes the following options.
Option
Description
S
elect from the following language options:
•
•
English
Español
Menu Language
•
•
Français
繁體中文
Note:
OSD language may vary from region to region.
Menu
Background
Enables you to set the OSD background to be
transparent or solid.
Enables you to set the TV to turn off after a set
time. Select from the following sleep timer
options.
•
•
•
•
•
120 minutes
90 minutes
60 minutes
30 minutes
Off
Sleep Timer
You can also press
on the remote control to
again to reset the
enable sleep mode. Press
timer.
Enables closed captions. Select from the
following options:
Closed Caption
(available in the
US only)
•
•
CC1 ~ CC4
TEXT1 ~ TEXT4
Erases all customized settings and return all
values to factory defaults.
Preset
82
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7 Setting Parental Controls (Available in the US
and Canada only)
Menu
Press
to enter the OSD Main Menu screen.
PARENTAL
Password:
CH
MENU
Select Parental Menu
Select :
Enter :
Return :
VOL
1
Press
or
to enter the PARENTAL Menu. You are
prompted for the password:
2 Enter the password using the numeric keys on the remote control.
The default password is 0000.
3 Press
to confirm if the password is correct.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press
or CHS/CH
T
button to select an option.
PARENTAL
Rating
OFF
Unrated Program Block
TV Rating
View
Movie Rating
Cdn. English Rating
Cdn. French Rating
Change Password
Preset
OK
CH
Select Parental Menu
Select :
Enter :
Return :
VOL
SOURCE
5 Press
6 Press
or
to change the mode setting.
to select the changed setting and return to the
PARENTAL Menu.
Menu
7 Press
to exit the PARENTAL menu.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
The Parental Control Function (V-CHIP) is used to block program viewing
based on the ratings sent by the broadcast stations1. The United States has
two rating systems for viewing contents, TV Parental Guidelines, and movie
ratings. The TV Parental Guidelines work in conjunction with the V-CHIP to
help parents screen out inappropriate television programs from their
children.
Movie ratings are used for original movies rated by the Motion Picture
Association of America (MPAA) as watched on cable TV and not edited for
television. The V-CHIP can also be set to block MPAA-rated movies.
The Parental menu includes the following options.
Option
Description
Enables you to select a rating setting. Select
Custom to customize all other settings.
•
•
•
•
•
OFF
Child
Youth
Youth Adult
Custom
Rating
Unrated
Program Block
Enables you to block or allow viewing of selected
unrated content.
1. Parental functions are only available in the United States of America and
Canada and are contingent upon the availability of the TV network
programming.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
Enables you to block or allow viewing of rated
television content.
PARENTAL
Rating
TV-Y
ALL
V
FV
V
V
S
L
D
TV-Y7
TV-G
V
V
TV Rating
TV-PG
TV-14
TV-MA
V
V
V
V
V
V
V
V
V
V
V
V
V
V
OK
SOURCE
CH
Select Parental Menu
Select :
Enter :
Return :
VOL
Enables you to block or allow viewing of rated
movie content.
PARENTAL
G
V
V
V
V
V
PG
PG-13
R
Movie Rating
NC-17
V
X
OK
CH
Select Parental Menu
Select :
Enter :
Return :
VOL
MENU
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
Enables you to block or allow viewing of content
rated according to Canadian English standards.
PARENTAL
C
V
V
B
B
B
B
C8+
G
Cdn. English
Rating
PG
14+
18+
OK
CH
Select Parental Menu
Select :
Enter :
Return :
VOL
MENU
Enables you to block or allow viewing of content
rated according to Canadian French standards.
PARENTAL
G
V
V
V
V
V
8 ans +
13 ans +
16 ans +
18 ans +
Cdn. French
Rating
OK
CH
Select Parental Menu
Select :
Enter :
Return :
VOL
MENU
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
Enables you to change the password. Enter the
old password followed by the new password to
change it.
PARENTAL
Old Password:
New Password:
New Password Again:
Change
Password
OK
SOURCE
CH
Select Parental Menu
Select :
Enter :
Return :
VOL
Erases all customized PARENTAL settings and
return all values to factory defaults.
Preset
Note:
The French and English ratings are for the US and Canada only.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Refer to the following table for TV rating information:
D
FV
Fantasy
Violence
S
L
V
Sexually
Suggestive
Dialog
TV RATINGS
Sexual
Situations
Adult
Language
Violence
TV-Y
(All children)
;
:
;
;
;
;
;
;
;
;
TV-Y7
(Directed to
older children)
TV-G
(General
audience)
–
–
;
:
;
:
;
:
;
:
TV-PG
(Parental
guidance
suggested)
TV-14
(Parents
strongly
cautioned)
–
:
:
:
:
TV-MA
(Mature
audience only)
–
:
:
:
:
:
:
:
:
Block Content
;:The content rating can be set, but this rating is not normally broadcast by
TV stations.
::The content rating can be set.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Refer to the following table for movie rating information.
MPAA RATINGS
G
GENERAL AUDIENCES
Suitable for all ages.
PARENTAL GUIDANCE
SUGGESTED
Some material may not be suitable for
children.
PG
PARENTS STRONGLY
CAUTIONED
Some material may be inappropriate for
children under 13.
PG-13
Under 17 requires accompanying parent
or guardian.
R
RESTRICTED
NC-17
X
NO ONE 17 OR UNDER ADMITTED
NO ONE UNDER 18 ADMITTED.
X is an older rating that may be used in some older movies.
More information about the rating systems can be found by visiting these
websites:
http://www.mpaa.org
http://www.tvguidelines.org
90
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Troubleshooting
Situation
Solution
•
•
•
Connect the power cord properly.
Check if the power LED is on or not.
Press power on the control panel or remote
control.
•
•
•
•
Press source to cycle through connected
video sources.
Press channel up or channel down to
switch to other TV stations.
Check the Air/Cable OSD settings. See
No picture and sound.
Make sure all cables are connected
properly.
•
•
Check the antenna and cable connections.
Adjust the brightness in the OSD menus.
No picture, or poor picture, sound is OK.
Picture is not in color.
•
Adjust the saturation in the OSD menus.
•
•
Make sure the source device is functioning
properly.
Make sure the audio cable is connected
securely.
Picture is OK, no sound.
•
•
Turn the mute off.
Press volume up on the control panel or
remote control.
•
•
Adjust the balance in the OSD menus. See
One of the speakers has no sound.
Try the Auto Program function in the OSD
“TV Setting” menu. See “Auto Search” on
Cannot receive some TV channels using
cable TV.
Want to reset TV settings.
Cannot operate menus.
•
•
Use the Reset function in the OSD menu.
If OSD items are colored in light blue, the
system is in a state such that those settings
are not available.
Forgot parental control password.
•
Use the master password 0928
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Situation
Solution
•
Make sure the video signal cable is
connected properly.
Screen image turns over.
•
•
Adjust the location of the antenna, placing it
far from roads or sources of interference.
Check the antenna and the video signal line
connections.
Snow appears on the screen.
Blurred or overlapped images.
•
•
•
Readjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or
change the video signal cable.
•
•
•
•
Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged in.
Make sure the path between the remote
control and the sensor is clear.
Remote control doesn’t work.
•
Try operating the remote control at a closer
distance to the TV. Refer to “Using the
92
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Specifications
LCD Panel Size
Aspect Ratio
26/32/37 inch TFT
16:9
Best Resolution
1366 (horizontal) x 768 (vertical)
Built-In analog and digital (for US and Canada Only)
TV Tuner
TV System
AV1: Composite Video (CVBS)
AV2: Composite Video (CVBS + S-Video)
AV3: Composite Video (S-Video)
AV4/AV5:Component Video (YPBPR)
VGA: PC in
Video System
HDMI Ver. 1.1
E-CARD (Selected models only)
AV1, AV2, AV3, AV4, AV5, HDMI: L/R RCA jacks
(audio input)
3.5 mm earphone out
Audio System
PC Audio-in
R/L/Subwoofer (2.1 ch out)
Optical out (For built-in DTV only)
E-CARD (Selected models only)
Built-in Stereo Speakers Output
Power Supply
26”/32” - 8 W x 2, 37” - 15 W x 2
100-240V, 50/60 Hz
Power Consumption
Component Format
26"/32" - 200W (max.), 37" - 250W (max.)
480i, 480p, 576i, 576p, 720p, 1080i
94
Download from Www.Somanuals.com. All Manuals Search And Download.
6.1 PC Mode Support Timing
Pixel
Format
Hor. Freq. Hor.
(kHz)
Ver. Freq. Vertical
Polarity (Hz) Polarity
Standard
1
640*480
640*480
640*480
640*480
800*600
800*600
800*600
800*600
800*600
1024*768
1024*768
1024*768
1280*1024
640*400
720*400
31.47
–
–
60
72
75
85
56
60
72
75
85
60
70
75
60
70
70
–
–
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
2
37.861
37.5
3
–
–
4
NA
NA
+
NA
+
5
35.156
37.879
48.077
46.875
NA
6
+
+
7
+
+
8
+
+
9
NA
–
NA
–
10
11
12
13
14
15
48.363
56.476
60.023
NA
–
–
+
+
NA
NA
NA
NA
NA
NA
NA
NA
95
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Glossary
Broadcast TV: Broadcasting video signals using high-frequency
electromagnetic waves to distribute television channels to viewers (standard
TV broadcast).
CATV: Community Antenna Television, the original name for cable TV. A
television distribution system that uses coaxial cable instead of the
traditional radio broadcasting (over-the-air) method to deliver television, FM
radio, and other services to consumers.
Color Temperature: Adjusting the color temperature enables you to set the
intensity of white light. Color temperature is measured in Kelvin (K). Higher
color temperatures result in a blue tint. Lower temperatures result in a red
tint.
Hue: Colors in a color system are measured by hue, saturation and
luminance. Hue indicates the predominant color.
LCD (Liquid Crystal Display): A display technology that uses
rod-shaped molecules (liquid crystals) that flow like liquid and bend light.
Saturation: Chromatic purity indicating the amount of white contained in a
color. Fully saturated colors are pure colors; less saturated colors appear as
pastel shades.
Stereo: The default audio signal belonging to a particular channel.
S-Video: Separate video, a video cabling standard used to transmit video
by keeping brightness (Y) and color information (C) on separate channels.
Most often used with camcorders.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
|