A
G
A
C
9.6"/12.1" Liquid Crystal Display
Building 72 Yunbei Road Nanxiang Town
Shanghai China 20 802
Jiading
02 69
02 69
Television
7
7
999
8
8
User's Manual
MAK-000022
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Regulatory Information
FCC Compliance Statement1
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Additional Information
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
WARNING: The Federal Communications Commission warns that
changes or modifications of the TV not expressly approved by the party
responsible for compliance could void your authority to operate the
equipment.
1. applies only to products purchased in the United States of America
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DOC Compliance Notice1
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This
device complies with Canada ICES-003 Class B.
CE Conformity Statement2
This device complies with the requirements set out in the Council
Directive on the approximation of the Laws of the Member States
relating to Electromagnetic Compatibility (89/336/EEC) and the
Amendment Directive (92/31/EEC), Low-Voltage Directive (73/23/EEC)
and the Amendment Directive (93/68/EEC).
1. applies only to products purchased in Canada
2. applies only to products purchased in the European Union
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Description of Warning Symbols
Before You Proceed
1. Read all Safety Notices in Section 3 of this manual and
instructions in the User’s Manual carefully before either plugging
in or turning the TV on.
2. Keep this User’s Manual in a safe place for future reference.
Keep the box and packaging in case the TV needs to be shipped
in the future.
3. Follow the TV and warning label instructions.
4. Any uses, operations, changes, alterations or modifications of
the TV that do not follow the instructions in this manual will void
this TV’s warranty.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
CAUTION
This symbol is used to alert
users to pay attention to
important descriptions
regarding usage, maintenance
(repair), and additional
important information related
to this TV.
This symbol is used to alert
users to the risk of electric
shocks due to dangerous and
uninsulated components.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Safety Notices
Electric Power Notice
Electric power may cause personal injury and mechanical damage if
misused. Although safety has been taken into consideration during the
design and production of this TV, electric shock or fire can result if the
TV is misused. To prevent potential danger, read and follow the
instructions and warnings contained in this manual when setting up,
operating or cleaning the TV. In addition, please read all “Safety
Notices” contained in this manual carefully before using the TV.
Power Supply Safety Notes
1. To avoid electric shocks, do not use an extended power cord or
an outlet that does not match this TV's plug or leaves the plug
exposed.
2. This TV has a 3-pin grounded plug. The third pin connects to
ground; do not remove it or alter it in anyway.
3. If the power cord or plug is damaged or worn, unplug it
immediately and contact an authorized service technician for
maintenance.
4. To avoid fire or electric shocks, do not overload electric power
outlets.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Safety Notes
Antenna
We suggest that you use an outdoor antenna to get the best signal
possible unless you have cable TV or a centralized indoor antenna
system. You may, however, use an antenna indoors if it is placed in a
location free from interference.
Location
Avoid prolonged exposure to sunlight or other strong sources of heat.
Leave sufficient distance between the TV and the wall to provide
enough space for the emission of heat.
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
Power
To avoid danger of fires or electric shock, only use those adapters
listed below, which are compatible with this TV.
•
•
EDAC POWER ELECTRONICS CO., LTD.: EA1050E-120
LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1
2
3
4
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
5
6
7
8
9
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install
in accordance with manufacturer’s
instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding-type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit into
your outlet, consult an electrician for
Note: Images are
for illustration only
and may vary by
model or region.
replacement of the obsolete outlet.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Protect the power cord from being walked on
or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified
by the manufacturer.
12 Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
These servicing instructions are for use by
qualified service personnel only.To reduce
the risk of electric shock, do not perform any
servicing other than that contained in the
operating instructions unless you are
qualified to do so.
CAUTION
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal Safety
To avoid overloading the power supply, never
plug too many electrical devices into an outlet,
power strip, or extension cable.
Dangerous high-voltage electric power
components are located inside the TV. To avoid
electric shock, do not disassemble the TV in any
way.
Do not place or drop metals, small objects, or
flammable materials into the vent of the TV.
If the TV is dropped, falls down, or is otherwise
damaged, unplug the power cord immediately
and contact an authorized service technician.
If any fluid is sprayed or dropped into the TV,
contact an authorized service technician.
The screen of the TV is made of glass. Avoid
hitting or scraping it. If the screen is broken, do
not touch the broken glass.
Do not allow children to use the TV unattended.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Do not place the TV in locations where there is
excessive steam or dust.
Avoid blocking the TV's vents, do not place the
TV on a bed, sofa, carpet, or in a sealed cabinet.
Install the outdoor antenna (not included) away
from power transmission lines to avoid possible
danger.
Unplug the power cord and antenna connector
when there is a storm or when the TV is not in
use for long periods to avoid electric shock from
lightning.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
This TV is designed for home power sources as
labeled on the casing. Avoid using any other
power accessories to avoid electric shock or
other damage.
V
The plug can be inserted into an outlet in only
one direction as shown to the left. Do not alter
the plug. Contact an authorized service
technician if you cannot plug it in correctly.
Note: Images are
for illustration only
and may vary by
model or region.
If there is any problem that cannot be resolved
according to the instructions given in this
manual, contact an authorized service technician
immediately. Do not attempt any methods not
covered in this manual.
Maintenance
Do not attempt to repair the TV by yourself.
Contact an authorized service technician. Ask
the service technician to complete a safety
inspection before switching the power on after
completing any maintenance.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Preface
Thank you for purchasing a Hannspree Liquid Crystal Display Television
(LCD TV). Your new TV will allow you to enjoy superior audio and video
while enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using
or operating your TV. To ensure the safe and correct installation and
operations of the TV, it is important that the safety and operation
instructions in this manual are followed.
This instruction manual is designed to assist you in setting up and using
the TV. The information in this manual has been carefully checked for
accuracy; however, no guarantee is given to the correctness of the
contents. The information in this manual is subject to change without
notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”)
shall not be liable for direct, indirect, special, exemplary, incidental or
consequential damages arising from any defect or omission in this
manual, even if advised of the possibility of such damages in advance.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright
© Copyright 2005 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and
distributed under licenses restricting its use, copying and distribution.
No part of this manual may be reproduced in any form by any means
without the prior written authorization of Hannspree. The TV described
in this manual may include copyrighted software of Hannspree (or other
third parties). Hannspree (or other third parties) preserves the exclusive
rights for copyrighted software, such as the right to distribute or
reproduce the copyrighted software. Accordingly, and to the extent
allowed by applicable law, any copyrighted software contained in the
product described herein shall not be distributed, modified, reverse
engineered, or reproduced in any manner without the prior written
authorization of Hannspree (or of other third parties).
The Hannspree logos presented herein are trademarks of Hannspree.
All other product names, trademarks or logos mentioned herein are
used for identification purpose only, and may be the trademarks or
registered trademarks of their respective owners.
The purchase of the product described herein shall not be deemed to
grant, either directly or by implication, estoppel or otherwise, any
license under the copyrights, patents, patent applications or trademarks
of Hannspree, except for the normal, non-exclusive use that arises by
operation of law in the sale of a product.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Introducing the TV
Thank you for purchasing this LCD TV. Your LCD TV is designed to be safe,
versatile, and easy to use. The design makes it a fun addition to any room.
You can watch broadcast or cable television channels, and easily connect a
VCR, VCD, DVD player or a game device to the standard RCA and S-Video
input jacks that are included in the 4-IN-1 A/V cable.
Convenient control buttons located on the TV and a handy remote control let
you change channels, adjust the volume, and change display settings
through an easy-to-use on-screen display menu system. The built-in stereo
speakers provide full rich sound and a convenient audio output port lets you
connect to an external audio system or headphones.
Features
•
•
•
•
Built-in TV tuner
4-IN-1 A/V cable
On-Screen Display (OSD) menu system
Built-in stereo speakers
15
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Checking Package Contents
Make sure the following components are included in the box. Please contact
Hannspree Customer Service immediately if anything is missing or
damaged.
•
•
•
•
•
•
•
•
•
•
TV
User’s manual
Quick start guide
Warranty and service manual
Power cord
Power adapter
4-IN-1 A/V cable
Remote control and battery/batteries
RCA jack x 3 (selected models only)
Antenna cable (Hong Kong only)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Getting Started
Control Panel
Description
Icon
Function
/POWER
Power
Turns the TV on and off.
Indicates power status.
Power LED
Selects the input source to be
displayed:
(TV, AV1, AV2 or AV2s) /
(TV, AV or AVs)
Note: If S-Video is connected,
the TV autodetects it and AV and
AV2 display as AVs and AV2s.
SOURCE
Source
Menu
Turns the On-Screen Display
(OSD) menu on and off.
MENU
channel up
(ꢀ / ꢁ / ꢂ / + / ꢃ /
Changes channels. Press
channel up to increase the
channel number. Press channel
down to decrease the channel
number.
)
⌃
Select
channel
channel down
(ꢄ / ꢅ / ꢆ / – / ꢇ /
⌃
)
volume up
Press volume up to increase the
audio volume. Press volume
down to decrease the audio
volume.
( + / ꢀ / ꢃ /
)
Adjust
volume
volume down
( – / ꢄ / ꢇ /
)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Input and Output Jacks
Description
Connector
Function
Use the included 4-IN-1 A/V
cable to connect external
devices, such as a VCR, VCD,
DVD player, CVBS RCA
cables or a game device.
4-IN-1
(AV / AV2)
Audio Input: AV connector
audio (white and red) cables.
Video Input: AV connector
video (yellow) or S-Video
cable.
Use the AV1 input to connect
an external device, such as a
VCR, VCD, or DVD player.
Audio Input: AV connector
audio (white and red) cables.
R/L/VIDEO (AV1)
(selected models
only)
Video Input: AV connector
video (yellow) cable.
Connects to an antenna or
CATV cable television line.
ANT
Connects to the included
power adapter.
DC-IN (DC-12V)
Connects to headphones or
external speakers with built-in
amplifier.
Headphone /
Speakers jack
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Description
Icon
Function
Press this button to activate the OSD
menu system and to adjust various
settings and personal preferences.
MENU
ENTER
Menu
Arrow
MENU
/
/
Pressꢀ / ꢁ / ꢂ and ꢃ to scroll
through the on-screen display
menus.
Favorite channels can be selected
using the ꢂ and ꢃ buttons on the
remote control.
ꢀ / ꢁ / ꢂ / ꢃ /
< / >
1
4
2
5
3
6
Use to select a channel directly.
Press 0-9 to enter the channel
number (press 1 and 0 for channel
10).
Number
Recall/Last
MPX
7
8
0
9
Press this button to return to the last
channel selected.
RECALL / LAST
MTS
Press this button to enable the
bilingual function when the program
has stereo/ I/II /MONO capabilities.
This option may not be available in
your local area.
Power
Turns the TV power on or off.
-VOL VOL+
VOL VOL
Press volume up to increase the
audio volume. Press volume down to
decrease the audio volume.
Adjust volume
Press this button to eliminate sound.
Press mute again or press the
volume adjust buttons to restore
sound.
MUTE
Mute
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Icon
Function
Changes channels. Press channel
up to increase the channel number.
Press channel down to decrease the
channel number. In AV mode, press
either button to return to TV mode.
Select channel
Press this button to cycle the video
input sources. The source is
displayed on the screen.
SOURCE
AUTO
Source
Press this button to automatically
adjust the screen parameters in PC
mode. Only available with 15-inch
TVs.
Auto (selected
models only)
Press this button to show messages
on the screen, such as the channel
number. Press this button again to
close the displayed message.
Display (selected
models only)
DISPLAY
RESET
Reset (selected
models only)
Press this button to reset the TV.
Press this button repeatedly to set
the TV timer (30, 60, 90, or 120
minutes). A timer appears on the top
right corner of the screen to show
the time remaining.
Cancel the timer by pressing the
button until the displayed time
disappears.
Sleep
(selected models
only)
Sleep
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Remote Control Battery/Batteries
1
Open the battery compartment cover at the back of the remote control (A).
2 For AAA batteries: Insert the batteries paying attention to the
polarity markings inside the battery compartment (B).
For lithium batteries: Insert the battery / batteries with the positive
side (+) facing up (B). Remember to slide the battery / batteries
underneath the metal contacts. Press downward to set the battery /
batteries in place.
3 Replace the battery compartment cover (C) / (D).
A
A
A
B
C
B
B
C
C
D
AAA batteries Lithium batteries 1 Lithium batteries 2
Note
Your remote control may have either AAA type batteries or
CR2032 / CR2025 lithium battery/batteries.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
•
•
•
If the remote control is not used for a long period, remove the batteries
and store them separately.
Handle damaged or leaking batteries carefully, and wash hands after
such handling.
If your remote control has two batteries, do not mix new and old
batteries because the life of the new batteries will be shortened.
Chemical fluids may leak from the old batteries.
•
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
•
•
Refer to your local recycling or waste disposal rules and contact a local
waste disposal vendor to dispose of used batteries.
The remote control may have a magnet in it, so do not place magnetic
sensitive items such as watches, credit cards, or flash media close to
the cover.
•
Do not use force when pulling the remote control cover open; you may
damage the hinge.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Making Connections
Connecting to an Antenna or Cable TV
1
Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT
Jack (VHF/UHF IN Jack) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the antenna socket or CATV cable.
Antenna
ANT
ANT jack
(VHF/UHF IN jack)
Antenna/CATV
socket
Antenna/CATV
coaxial cable
Note
If you cannot receive channels after connecting to an antenna or cable TV
line, try scanning for channels. See “Auto Program” on page 43.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to AV Devices
Connect external devices such as a VCR, VCD, DVD player, or video game
console to the TV using the supplied 4-IN-1 A/V cable.
Connecting to a VCR/VCD/DVD Player
The illustration presented here shows how to connect the TV to a VCR,
VCD or DVD player. Actual connections may vary according to the make
and model of the device. Refer to the user’s manual included with the device
for more detailed instructions.
VCR
DVD
VCD
4-IN-1
4-IN-1 A/V jack
B
R W Y
S-Video
connector
AV
connectors
4-IN-1 A/V cable
Note
•
The cables are color-coded (black, red, white, yellow). Connect each
color-coded cable to the appropriate connector on your device.
•
When connecting the S-Video connector and AV connector at the same
time, the priority is given to the S-Video connector.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Video Camera
The instructions presented here are a general guide to connecting the TV to
a camcorder or other type of digital camera. Actual connections may vary
according to the make and model of the device. Refer to the user’s manual
included with the camcorder or camera for more detailed instructions.
S
WB
4-IN-1
4-IN-1 A/V jack
S-Video
connector
B
R
W
4-IN-1 A/V cable
Y
AV connectors
Note
The cables are color-coded (black, red, white, yellow). Connect each color-
coded cable to the appropriate connector on your device.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Video Game Console
The instructions presented here are a general guide to connecting the TV to
a game console using the RCA Jacks (some game devices may require a
unique adapter that is not provided). Actual connections may vary according
to the make and model of the game device. Refer to the user’s manual
included with the game console for more detailed instructions.
4-IN-1
4-IN-1 A/V jack
AV
B R W Y
connectors
S-Video
connector
4-IN-1 A/V cable
Notes
•
Connect the 4-IN-1 A/V cable connectors to the corresponding
connectors on your game device adapter.
•
If the 4-IN-1 A/V cable does not fit the game device, then insert RCA jack
between the 4-IN-1 A/V cable and game device.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Speakers or Headphones
External speakers or headphones may be used to listen to the TV rather
than using the built-in speakers. Connect external speakers with built-in
amplifier to the speaker line out port or headphones to the headphone port
as illustrated.
Headphones
HEADPHONE
Headphone/
Speakers jack
Speakers
Notes
•
External speakers or headphones are not included with the TV.
•
The internal TV speakers will not output sound when headphones are
plugged in.
•
Use external speakers with built-in amplifiers only.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Power Adapter
1
Connect the power cord to the power adapter as illustrated.
2 Plug the power adapter connector into the DC-IN input jack on the
rear panel of the TV.
3 Insert the three-pronged plug at the other end of the power cord into
a power outlet.
Three-pronged
plug
Power outlet
DC-IN
DC-IN
Power cord
Power adapter
Note
Images are for illustration only and may vary by model or region.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Using the TV
Using the Remote Control
For best results, use the remote control within a distance of 16 feet
(5 meters) from the front of the TV. Do not exceed an angle of 30 degrees
when pointing at the TV.
Notes
•
The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
•
Aim the transmitter on the remote control at the signal sensor and
ensure that there are no obstacles between them.
Turning the TV On and Off
1
Press power
TV.
on the remote control or control panel to turn on the
2 Press power
again; the TV is in off mode.
Selecting Channels
Press channel up or channel down on the control panel to select the
channel or enter the specific channel number by pressing the number
buttons on the remote control.
Switching Source Signals
Press source to select the incoming source signal.
The current source setting (TV, AV or AVs) or (TV, AV1, AV2 or AV2s)
appears on the upper left corner of the screen.
Adjusting the Volume
Press volume up to increase the volume. Press volume down to decrease
the volume. The volume level is displayed on the screen.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple
method to adjust your TV’s settings. This chapter describes how to change
each of the available settings.
TV & Remote Control Buttons
You may adjust the setting from your remote control or the buttons located
on the TV's front control panel.
Control Panel
Remote Control
– Menu
– M
Menu/Enter
CH UP / Arrow
CH UP
(ꢁ/ +) / ꢁ / ꢀ /
(ꢃ / ꢄ / ꢀ / + / ꢁ /
)
⌃
CH DOWN
CH DOWN / Arrow
⌃
(ꢅ / ꢆ / ꢇ / – / ꢂ /
)
(ꢂ/ –) / ꢂ / ꢇ /
VOL UP / Arrow
VOL UP
(+ /ꢁ) / ꢁ / ꢀ /
VOL DOWN / Arrow
( + / ꢃ / ꢁ /
)
VOL DOWN
(– /ꢂ) / ꢂ / ꢇ /
( – / ꢅ / ꢂ /
)
Note
Follow the instructions indicated on the bottom of the OSD Function Menu.
In the example shown here, press VOL UP or the ꢀ arrow key to enter your
setting, CH UP/DOWN or ꢁ/ꢂ arrow keys to navigate through the items,
or MENU to exit the OSD menu.
Adjust :
Return :
Select :
30
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Function Menu
The following illustration helps you become acquainted with OSD menu
items.
Current Menu: displays
the title of the currently
selected menu.
Adjustable Items: displays
the setting or value of
adjustable items.
Picture
Video Mode
Contrast
Brightness
Saturation
Hue
User
40
47
40
25
04
Main Menu:
displays the
available
Sharpness
Color Temp
NR
Neutral
Off
menus. The
selected
Preset
menu is
Adjust :
Return :
Select :
shown in a
different color.
Instructions: displays
instructions for adjusting
settings.
The following menus can be set using different adjustment methods, which
are described in the instructions.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Setting
Picture
Press menu to enter the OSD
menus.
Video Mode
Contrast
Brightness
Saturation
Hue
User
40
47
40
25
04
1
Press CH UP or CH DOWN to
Sharpness
Color Temp
NR
select Picture Setting.
Neutral
Off
2 Press VOL UP to enter the
Preset
Picture Setting menu.
Adjust :
Return :
Select :
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Mode
1
Press VOL UP or VOL DOWN to
switch between Video Mode options:
User: Enables you to set user
defined values.
Picture
Video Mode
Contrast
Brightness
Saturation
Hue
User
40
47
40
25
04
Sharpness
Color Temp
NR
Neutral
Off
Dynamic: Sets the display for
enhanced picture contrast and
sharpness (default).
Preset
Adjust :
Return :
Select :
Standard: Sets the display for
normal viewing (default).
Movie: Sets the display to emulate a
movie display (default).
2 In User mode, press CH UP or
CH DOWN to select Contrast,
Brightness, Saturation, Hue (does
not apply to PAL system), or
Sharpness.
3 Press VOL UP or VOL DOWN to
change the values. A slide bar
appears for each option.
4 Press VOL UP to increase the
chosen option’s value. Press
VOL DOWN to decrease the value.
5 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Temperature
1
Press CH UP or CH DOWN to select
Picture
Video Mode
Contrast
Brightness
Saturation
Hue
User
Color Temp.
40
47
40
25
04
2 Press VOL UP or VOL DOWN to
switch between Color Temp options:
The following three color
Sharpness
Color Temp
NR
Neutral
Off
Preset
Adjust :
Return :
Select :
temperatures are available.
Neutral: Gives white colors a neutral tint.
Warm: Gives white colors a reddish tint.
Cold: Gives white colors a bluish tint.
3 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
Noise Reduction
Noise reduction enables you to reduce the amount of interference in the
signal.
1
Press CH UP or CH DOWN to select
Picture
Video Mode
Contrast
Brightness
Saturation
Hue
User
noise reduction (NR).
40
47
40
25
04
2 Press VOL UP or VOL DOWN to
Sharpness
Color Temp
NR
switch between NR options:
Neutral
Off
Preset
Off
Adjust :
Return :
Select :
Low
High
3 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset
Preset erases all customized picture settings and returns all values to
factory defaults.
1
Press CH UP or CH DOWN to select
Picture
Video Mode
Contrast
Brightness
Saturation
Hue
User
Preset.
40
47
40
25
04
2 Press VOL UP to reset all picture
settings to factory defaults.
Sharpness
Color Temp
NR
Neutral
Off
Preset
“OK” appears on the screen.
Adjust :
Return :
Select :
3 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Setting
Audio
Press menu to enter the OSD
menus.
Equalizer
100Hz
User
+07
+07
+07
+07
+07
0
330Hz
1
Press CH UP or CH DOWN to
1KHz
3.3KHz
6.6KHz
Balance
Surround
Preset
select Audio Setting.
Off
2 Press VOL UP to enter the
Audio Setting menu.
Adjust :
Return :
Select :
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Equalizer
1
Press VOL UP or VOL DOWN to
switch between Equalizer options:
User: Enables you to set user
defined values.
Audio
Equalizer
User
100Hz
330Hz
1KHz
+07
+07
+07
+07
+07
0
3.3KHz
6.6KHz
Balance
Surround
Preset
Off
Movie: Sets the audio to
accommodate movies (default).
Music: Sets the audio to
accommodate music (default).
Hall: Sets the audio to accommodate
a hall environment (default).
Flat: Sets all frequency values to
zero (default).
Adjust :
Return :
Select :
Selecting User enables you to set
the Equalizer manually (only User
used).
2 In User mode, press CH UP or
CH DOWN to select one of the
frequency bars shown.
3 Press VOL UP to increase the
frequency for the chosen bar. Press
VOL DOWN to decrease the
frequency.
4 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Balance
1
Press CH UP or CH DOWN to select
Audio
Equalizer
User
Balance.
100Hz
330Hz
1KHz
+07
+07
+07
+07
+07
0
2 Press VOL UP or VOL DOWN to
adjust the balance between left and
right audio channels.
3.3KHz
6.6KHz
Balance
Surround
Preset
Off
Adjust :
Return :
Select :
3 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
Surround
1
Press CH UP or CH DOWN to select
Audio
Equalizer
100Hz
User
Surround.
+07
+07
+07
+07
+07
0
330Hz
1KHz
2 Press VOL UP or VOL DOWN to turn
the surround sound feature on and
off.
3.3KHz
6.6KHz
Balance
Surround
Preset
Off
Adjust :
Return :
Select :
3 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset
Select this item to erase all customized audio settings and return all
values to factory defaults.
1
Press CH UP or CH DOWN to select
Audio
Equalizer
100Hz
User
Preset.
+07
+07
+07
+07
+07
0
330Hz
1KHz
2 Press VOL UP to reset all audio
settings to factory defaults.
3.3KHz
6.6KHz
Balance
Surround
Preset
Off
“OK” appears on the screen.
Adjust :
Return :
Select :
3 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Skip
1
Press CH UP or CH DOWN to select
TV
System
B/G
CH Skip.
CH Skip
Auto Program
Fine Tune
Fav. CH
2 Press VOL UP to enter the CH Skip
submenu.
3 Press CH UP or CH DOWN to select
Channel.
Enter :
Return :
Select :
4 Press VOL UP or VOL DOWN to
select the channel you want to
modify.
TV
CH Skip
Channel
Skip
1
Off
5 Press CH UP or CH DOWN to select
Skip.
6 Press VOL UP or VOL DOWN to turn
channel skip on or off:
Adjust :
Return :
Select :
On: the channel is skipped when
pressing CH UP or CH DOWN.
Off: the channel is not skipped when
pressing CH UP or CH DOWN.
7 Press menu to confirm the setting.
Note
You can still access the erased channel
by entering the channel number using the
number keys on the remote control.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Program
1
Press CH UP or CH DOWN to select
TV
System
B/G
Auto Program.
CH Skip
Auto Program
Fine Tune
Fav. CH
2 Press VOL UP to begin auto
programming.
3 The TV will search for all available
channels and add them to the
channel list.
Enter :
Return :
Select :
TV
4 Press menu to confirm the setting.
Auto-Programming
093.84 MHz
1
6%
Return :
Note
The new setting is confirmed
automatically when the OSD times out.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine Tune
1
Press CH UP or CH DOWN to select
TV
System
CH Skip
B/G
Fine Tune.
Auto Program
Fine Tune
Fav. CH
2 Press VOL UP to enter the Fine
Tune submenu.
3 Press CH UP or CH DOWN to select
Channel.
Enter :
Return :
Select :
4 Press VOL UP or VOL DOWN to
select the channel you want to
modify.
TV
Fine Tune
Channel
1
Frequency
055.25 MHz
5 Press CH UP or CH DOWN to select
Frequency.
6 Press VOL UP or VOL DOWN to
adjust the frequency for the channel
until the picture is clear.
Adjust :
Return :
Select :
7 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite Channel
1
Press CH UP or CH DOWN to select
TV
System
B/G
Fav. CH.
CH Skip
Auto Program
Fine Tune
Fav. CH
2 Press VOL UP to enter the Fav. CH
Setting submenu.
3 Press CH UP or CH DOWN to select
the Favorite channel you want to
modify (1 ~ 4).
Enter :
Return :
Select :
TV
4 Press VOL UP or VOL DOWN to
select the channel you want to set as
the favorite channel for that number.
5 Press menu to confirm the setting.
Fav. CH Setting
Favorite 1
1
1
1
1
Favorite 2
Favorite 3
Favorite 4
Adjust :
Return :
Select :
Note
The new setting is confirmed
automatically when the OSD times out.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Customize Setting
Customize
Press menu to enter the OSD
menus.
Sleep Timer
OSD Timeout
Language
Off
10 sec
English
1
Press CH UP or CH DOWN to
select Customize.
2 Press VOL UP to enter the
Customize Setting menu.
Adjust :
Return :
Select :
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Timer
1
Press CH UP or CH DOWN to select
Customize
Sleep Timer
OSD Timeout
Language
Off
10 sec
English
Sleep Timer.
2 Press VOL UP or VOL DOWN to
select a sleep timer value:
Off
Adjust :
Return :
Select :
30/60/90/120 minutes
The TV will turn off after the
specified number of minutes.
3 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
OSD Timeout
1
Press CH UP or CH DOWN to select
Customize
Sleep Timer
OSD Timeout
Language
30min
10 sec
English
OSD Timeout.
2 Press VOL UP or VOL DOWN to
select an OSD timeout value:
10/20/30/40/60 seconds
Adjust :
Return :
Select :
The OSD will time out after the
specified number of seconds.
3 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Language
1
Press CH UP or CH DOWN to select
Customize
Sleep Timer
30min
10 sec
English
Language.
OSD Timeout
Language
2 Press VOL UP or VOL DOWN to
select an OSD language:
English
Adjust :
Return :
Select :
3 Press menu to confirm the setting.
Note
The new setting is confirmed
automatically when the OSD times out.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Taking Care of Your TV & Remote
Control
Turn the power off before you begin cleaning the
TV.
For best results, use a clean lens cloth to
remove dust and fingerprints from the screen.
Do not wipe the shell of the TV with alcohol,
methanol, gasoline or oil products to avoid
GAS
OIL
damaging the finish. Wipe the shell with a dry
soft cloth and use neutral cleaning fluids.
If your model has leather components, wipe the
leather parts with a dry cloth and keep the area
dry. Place the TV far from sources of steam to
avoid making the leather wet.
Be careful to disconnect the power plug
correctly. Hold the plug. Do not attempt to
disconnect the plug by pulling on the power cord.
Arrange and store the power cord neatly as
shown to the left to avoid knotting or bending
which may cause fire due to damage or electric
leakage.
Note
Protect the remote control from shock or vibration to avoid damage.
Do not place the remote control in hot or humid locations.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Troubleshooting
Situation
Solution
•
•
•
Connect the power cord properly.
Check if the power LED is on or not.
Press power on the control panel or remote
control.
•
Press source to cycle through connected
video sources.
No picture and sound.
•
•
Press channel up or channel down to
switch to other TV stations.
Make sure all cables are connected
properly.
•
•
Check the antenna and cable connections.
Adjust the brightness in the OSD menus.
No picture, or poor picture, sound is OK.
Picture is not in color.
•
•
Adjust the saturation in the OSD menus.
Make sure all the cables are connected
properly.
•
•
Make sure the source device is functioning
properly.
Make sure the audio cable is connected
securely.
Picture is OK, no sound.
•
•
Turn the mute off.
Press volume up on the control panel or
remote control.
•
•
Adjust the balance in the OSD menus. See
Make sure the audio cable is connected
securely.
One of the speakers has no sound.
•
Try the Auto Program function in the OSD
“TV Setting” menu. See “Auto Program” on
Cannot receive some TV channels using
cable TV.
•
•
Use the Reset function in the OSD menu.
Want to reset TV settings.
Cannot operate menus.
If OSD items are colored in light blue, the
system is in a state such that those settings
are not available.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Situation
Solution
•
Make sure the video signal cable is
connected properly.
Screen image turns over.
•
•
Adjust the location of the antenna, placing it
far from roads or sources of interference.
Check the antenna and the video signal line
connections.
Snow appears on the screen.
Blurred or overlapped images.
•
•
•
Readjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or
change the video signal cable.
•
•
•
•
Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged in.
Make sure the path between the remote
control and the sensor is clear.
Remote control doesn’t work.
•
Try operating the remote control at a closer
distance to the TV. Refer to “Using the
51
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Specifications
9.6 / 12.1–inch LCD TV
LCD Panel Size
Aspect Ratio
9.6 / 12.1–inch TFT
4:3
9.6-inch: 800 (horizontal) x 600 (vertical)
12.1-inch: 640 (horizontal) x 480 (vertical)
Display Resolution
TV System
PAL
S-Video Input and Composite Video Input
(through the 4-IN-1 A/V cable) / Composite
Video Input (through the RCA jacks)
Video System
Audio System
4-IN-1 A/V cable L/R RCA jacks
3.5 mm headphone port /
L/R RCA jacks
Built-in Speakers
Power Supply
2W + 2W / 3W + 3W
100-240V, 50/60 Hz, 12V DC
40 W Maximum
Power Consumption
Optional Accessories
External Speakers
53
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Glossary
Aspect Ratio: The ratio of width to height of a film, image or display
screen.
Color Temperature: Adjusting the color temperature enables you to
set the intensity of white light. Color temperature is measured in
Kelvin (K). Higher color temperatures result in a blue tint. Lower
temperatures result in a red tint.
Hue: Colors in a color system are measured by hue, saturation and
luminance. Hue indicates the predominant color.
LCD (Liquid Crystal Display): A display technology that uses rod-
shaped molecules (liquid crystals) that flow like liquid and bend light.
OSD (On-Screen Display): A control panel on the television screen that
allows you to select viewing options.
Saturation: Chromatic purity indicating the amount of white contained
in a color. Fully saturated colors are pure colors; less saturated colors
appear as pastel shades.
Stereo: is the default audio signal belonging to a particular channel.
S-Video: Separate video, a video cabling standard used to transmit
video by keeping brightness (Y) and color information (C) on
separate channels. Most often used with camcorders, VCRs, and
quality receivers and amplifiers to provide sharper pictures.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
|