HANNspree Flat Panel Television LT01 10A1 User Manual

9.6" Liquid Crystal Display  
2F, No.362, Jui-Kuang Rd., Neihu District,  
Taipei City 114, Taiwan, R.O.C.  
TEL: 886-2-87520000  
Television  
LT01-10A1  
User's Manual  
FAX: 886-2-87527092  
NTSCTVTWEN1203  
MAC-001144  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Input and Output Ports ............................................. 19  
Connecting to an Antenna/Cable TV ......................... 20  
Using the Remote Control ........................................ 25  
Adjusting the Volume ............................................... 27  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Warranty and Service  
The instructions on this manual are for the model(s) listed on the front  
cover. Before you start reading, check your product number by looking  
at the rear of your TV.  
Thank you for purchasing our Liquid Crystal Display Television (LCD  
TV). With this product, you will be able to enjoy superior audio and  
video while enriching your lifestyle with advanced technology.  
The Hannspree TV is warranted for one year limited service from the  
date the product is received (as shown on the Warranty and Service  
Manual); please refer to the “Warranty and Service Manual” for the  
detailed warranty information.  
Hannspree provides complete service information in the included “War-  
ranty and Service Manual”, or directly from Hannspree global customer  
service center. Our service representatives will be very happy to serve  
you to your satisfaction.  
Hannspree global customer service center telephone number:  
From Taiwan please call 0800-008-800  
The Hannspree e-mail address:  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
Preface  
This manual is designed to assist users in setting up and using the  
LCD TV. Information in this document has been carefully checked  
for accuracy; however, no guarantee is given to the correctness of  
the contents. The information in this document is subject to change  
without notice.  
Copyright  
© Copyright 2003 Hannspree, Inc.  
All rights reserved. This product and related documentation are pro-  
tected by copyright and are distributed under licenses restricting their  
use, copying, and distribution. No part of this documentation may be  
reproduced in any form by any means without prior written authorization  
of Hannspree, Inc., and its licensors, if any.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Description of Warning Symbols  
Warning  
Caution  
This symbol is used to remind  
users to pay attention to  
important descriptions regard-  
ing usage and maintenance  
(repair) or additional impor-  
tant information related to this  
product.  
This symbol is used to remind  
users to pay attention to the  
danger of electric shocks due  
to dangerous internal non-  
insulated components.  
Electric Power Notice  
Electric power may cause personal injury and mechanical damage if it is  
misused. Although safety has been taken into consideration during the  
design and production of this product, electric shock or fire can result  
when the product is misused. To prevent potential danger, follow the  
instructions below when installing, operating and cleaning the product.  
In addition, read the following “Safety Notices” carefully before using the  
product to ensure that your TV is safe and long-lasting.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4
Safety Notices  
Power Supply Safety Notes  
1. To avoid electric shocks, do not use an extended power cord or  
an outlet that does not match this product's plug or leaves the  
plug exposed.  
2. This product has a 3-pin grounded plug. The third pin connects  
to ground; do not remove it.  
3. If the power cord or plug is damaged or worn, unplug it immedi-  
ately and contact a qualified service technician for mainte-  
nance.  
4. To avoid fire or electric shocks, do not overload electric power  
outlets.  
Installation Safety Notes  
Antenna  
We suggest that you use an outdoor antenna to get the best signal  
possible unless you have cable TV or a centralized indoor antenna  
system. You may, however, use an antenna indoors if it is placed in  
a location free from interference.  
Location  
Avoid allowing the TV to get prolonged exposure to sunlight or  
other strong sources of heat. Leave sufficient distance between the  
TV and the wall to provide enough space for the emission of heat.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Before You Proceed  
1. Read the Safety Notices and the User’s Manual carefully  
before turning the product on.  
2. Keep your User’s Manual in a safe place for future reference.  
Keep the box and packaging in case the product needs to be  
shipped in the future.  
3. Follow the product and warning label instructions.  
4. Any changes or modifications that do not follow the instructions  
in this manual will void this product's warranty.  
Warning  
To reduce the risk of fire or electric shock, do not expose this  
product to rain or moisture.  
Power  
To avoid danger of fires or electric shock, make sure that you use a  
proper adapter. The TV is compatible with the following adapters:  
• EDAC POWER ELECTRONICS CO., LTD.: EA 1050E-120  
• LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optimal Viewing Distance  
102 cm  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any ventilation openings. Install  
in accordance with the manufacturer’s  
instructions.  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
9. Do not defeat the safety purpose of the  
polarized or grounding-type plug: A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your  
safety. If the provided plug does not fit into  
your outlet, consult an electrician for  
replacement of the obsolete outlet.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Protect the power cord from being walked on  
or pinched particularly at the plug, conve-  
nience receptacles, and the point where they  
exit from the apparatus.  
11. Use only with a cart, stand, tripod, bracket,  
or table specified by the manufacturer, or  
sold with the apparatus. When a cart is used,  
use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
12. Only use attachments/accessories specified  
by the manufacturer.  
13. Unplug this apparatus during lightning  
storms or when unused for long periods of  
time.  
14. Refer all servicing to qualified service per-  
sonnel. Servicing is required when the appa-  
ratus has been damaged in any way, such as  
if the power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been  
exposed to rain or moisture, does not oper-  
ate normally, or has been dropped.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Personal Safety  
To avoid overloading the power supply, do not  
plug too many electrical devices into an outlet or  
extension cable.  
Dangerous high-voltage electric power compo-  
nents are located inside the TV. To avoid electric  
shock, do not disassemble the casing.  
Do not place or drop metals, small objects, or  
flammable materials in the vent to avoid an elec-  
tric shock or a fire.  
If the TV is dropped, falls down, or is otherwise  
damaged, unplug the power cord immediately  
and notify a qualified service technician.  
If any fluid is sprayed or dropped into the TV,  
remove the power plug immediately and notify a  
qualified service technician.  
The screen of the TV is made of glass, be care-  
ful to avoid hitting or scraping it. If the screen is  
broken, avoid cutting yourself on the broken  
glass.  
Do not allow children to use the TV unattended  
to avoid accidents caused by improper opera-  
tion.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
To avoid damage to power circuits, do not place  
the TV in locations where there is excessive  
steam or dust.  
Do not place the TV on a bed, sofa, carpet, or in  
a sealed cabinet to avoid blocking the product's  
vents.  
Install the outdoor antenna far from power trans-  
mission lines to avoid possible danger.  
Remove the power cord and antenna connector  
when there is a storm or when the TV is not in  
use for a long period to avoid electric shock from  
lightning.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
This product is designed for power sources as  
labeled on the casing. Avoid using any other  
power accessories to avoid electric shock or  
other damage.  
V
The plug can be inserted into an outlet in only  
one direction. Notify a qualified service techni-  
cian if you cannot plug it in correctly.  
If there is any problem that cannot be resolved  
according to the instructions given in this man-  
ual, notify a qualified service technician immedi-  
ately. Do not attempt any methods not covered in  
this manual.  
Maintenance  
Do not attempt to repair the TV by yourself.  
Notify a qualified service technician. Ask the ser-  
vice technician to complete a safety inspection  
before switching the power on after completing  
any maintenance.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Regulatory Information  
FCC Compliance Statement1  
This device complies with part 15 of the FCC Rules. Operation is sub-  
ject to the following two conditions: (1) This device may not cause harm-  
ful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These lim-  
its are designed to provide reasonable protection against harmful inter-  
ference in a residential installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be deter-  
mined by turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
Warning: A shielded-type power cord is required in order to meet FCC  
emission limits and also to prevent interference to nearby radio and tele-  
vision reception. It is essential that only the supplied power cord be  
used. Use only shielded cables to connect I/O devices to this equip-  
ment. You are cautioned that changes or modifications not expressly  
approved by the party responsible for compliance could void your  
authority to operate the equipment.  
1. applies only to products purchased in the United States of America  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DOC Compliance Notice1  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the Radio Interference  
Regulations of the Canadian Department of Communications.This  
device complies with Canada ICES-003 Class B.  
CE Conformity Statement2  
This device complies with the requirements set out in the Council Direc-  
tive on the approximation of the Laws of the Member States relating to  
Electromagnetic Compatibility (89/336/EEC) and the Amendment Direc-  
tive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the Amend-  
ment Directive (93/68/EEC).  
1. applies only to products purchased in Canada  
2. applies only to products purchased in the European Union  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Introducing the TV  
Thank you for purchasing this Liquid  
Crystal Display TV. Your LCD TV is  
designed to be safe, versatile, and  
easy to use. The design of the product  
is based on snail, which makes it a fun  
addition to any room.  
You can watch broadcast or cable  
television channels, and easily connect  
a VCR, VCD or DVD player to the  
standard RCA and S-Video input ports  
located at the rear of the unit.  
Convenient control buttons located on  
the top of the TV let you change chan-  
nels, adjust the volume, and change display settings through an  
easy-to-use on-screen menu system. The built-in stereo speakers  
provide full rich sound and a convenient audio output port lets you  
connect to an external audio system or headphones.  
Features  
• 9.6-inch color TFT LCD TV  
• Safe, sturdy construction  
• Built-in TV tuner  
• Audio/video support:  
– Stereo audio inputs  
– Composite video inputs  
– S-Video input  
– 3.5 mm stereo headphone output  
• On-Screen Display (OSD) menu system  
• MTS bilingual channel support  
• Built-in 2W+2W speakers  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7
Checking Package Contents  
Make sure the following components are included in the box. Contact  
your vendor immediately if anything is missing or damaged.  
TV  
Warranty and Service  
User’s Manual  
Quick Start Guide  
Manual  
U
ser's M  
Quick Start  
Guide  
anual  
W
a
rranty an  
m
d servic  
e
a
nua  
l
Wire Material Package  
Power Cord  
Power Adapter  
G
RCA Jack x 3  
S Jack x 1  
4-IN-1 Cable  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8
Getting to Know Your TV  
Front View  
7
TV  
2
3
4
5
6
1
Description  
Function  
Signal sensor/  
Power LED  
1
2
Receives signals from the remote control.  
Press VOL+ to increase the volume.  
Press VOL – to decrease the volume.  
Adjust volume  
Select channel  
Changes the channel. Press CH Z to  
increase the channel number. Press CH Y  
to decrease the channel number.  
3
Turns the On-Screen Display (OSD)  
menus on and off.  
4
5
Menu  
Selects the input source to be displayed  
(TV, AV1, or AV2).  
TV/AV  
6
7
Power  
Turns the TV on and off.  
Play audio content.  
Stereo Speakers  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Input and Output Ports  
4
4
1
2
3
4
5
6
Description  
Function  
Connects to headphones or other  
audio device.  
1
2
Headphone line out  
Connects to VCR/VCD/DVD player  
CVBS RCA left and right audio  
cables (white and red).  
Left and right audio in  
(AV1)  
Connects to VCR/VCD/DVD player  
CVBS RCA video cable (yellow).  
3
4
5
6
Video in (AV1)  
AV2  
Connects to the included 4-IN-1  
cable.  
Connects to the included power  
adapter.  
DC-IN  
Antenna/cable TV  
line in  
Connects to an antenna or CATV  
cable television line.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
9
Getting Started  
Connecting to an Antenna/Cable TV  
1. Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT  
Jack (VHF/UHF IN Jack) on the back of the TV.  
2. Connect the other end of the VHF/UHF (Antenna) or CATV cable to  
the Antenna socket or CATV cable.  
Antenna  
4
4
Antenna/CATV socket  
ANT jack  
(VHF/UHF IN jack)  
Antenna/CATV  
coaxial cable  
Note  
If you cannot receive channels after connecting an antenna or cable TV  
line, try scanning for channels. See “Auto Program” on page 44.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to AV Devices  
Connect external devices such as VCD/DVD players or VCRs to the  
TV using the AV1 and AV2 ports on the back of the TV.  
Connecting to a VCR, VCD or DVD Player  
The illustration presented here shows how to connect your TV to a  
VCR, VCD or DVD player. Actual connections vary according to the  
make and model of the device.  
VCR  
VCD  
4
DVD  
4
S-Video  
connector  
AV  
B
R W Y  
connectors  
AV2  
4-IN-1 cable  
Note  
The cables are color-coded (black, red, white, yellow). Connect each color-  
coded cable to the appropriate connector on your device.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to a Video Camera  
The illustration presented here shows how to connect your TV to a  
camcorder or other type of digital camera. Actual connections vary  
according to the make and model of the device.  
S
WB  
4
4
S-Video  
connector  
AV2  
B
R
W
Y
4-IN-1 cable  
AV connectors  
Note  
The cables are color-coded (black, red, white, yellow). Connect each color-  
coded cable to the appropriate connector on your device.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting External Speakers and Headphones  
Headphones or external speakers may be used to listen to the TV  
instead of the built-in speakers. Connect your headphones to the  
speaker/headphone line out port as illustrated.  
Headphones  
4
4
Speakers  
Speaker/Headphone  
line out  
Notes  
External speakers or headphones are not included with the product.  
The internal TV speakers will not output sound when headphones are  
plugged in.  
Use external speakers with amplifiers only.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the Power Adapter  
1. Connect the power cord to the power adapter as illustrated.  
2. Plug the power adapter connector into the DC-IN on the rear panel of  
the TV.  
3. Insert the three-pronged plug at the other end of the power cord into  
a power outlet.  
Power outlet  
Three-pronged plug  
4
4
Power cord  
DC-IN  
AC power adapter  
Refer to the “Power Supply Safety Notes” on page 6.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10  
Using the TV  
Using the Remote Control  
For best results, use the remote control within a distance of 5 meters  
from the front of the TV’s signal sensor. Do not exceed an angle of 30  
degrees when pointing at the signal sensor. Refer to the following  
illustration.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Turning the TV On and Off  
Power button  
1. Press the POWER button; the  
power indicator LED turns off,  
indicating the power has been  
turned on.  
TV  
2. Press the POWER button again;  
the power indicator LED shows  
red, indicating the TV is in  
standby (off) mode.  
Selecting Channels  
Channel down  
Channel up  
Press CH UP and CH DOWN on  
the control panel to select the  
channel or enter the specific  
channel number by pressing the  
number buttons on the remote  
control.  
TV  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Switching Source Signals  
Press the SOURCE button on the  
remote control or the TV button on  
the control panel to select the  
incoming source signal.  
Current source setting  
TV  
TV  
The current source setting CH xx  
appears on the top left corner of the  
screen; TV or AV appears on the  
bottom right corner of the screen.  
CH 40  
AV  
TV/AV  
Note:  
The TV supports S-Video input in addition to normal video and audio sig-  
nals. The TV detects the signal type automatically and gives priority to S-  
video when two signals are detected at the same time. This auto detection  
function is only available for AV2.  
Adjusting the Volume  
Volume down  
Volume up  
Press the VOL UP button to increase  
the volume. Press the VOL DOWN  
button to decrease the volume. The  
TV  
volume level is displayed on the TV.  
Press the MUTE button on the  
remote control to turn the sound off.  
The word “Mute” appears on the top  
left corner of the screen and sound  
is temporarily turned off.  
Mute  
Press the MUTE button on the  
remote control or press VOL UP  
button or VOL DOWN button to  
restore the original volume.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting On-Screen Display (OSD)  
Settings  
11  
The On-Screen Display (OSD) menu system provides a quick and  
simple method to adjust your TV’s settings. This chapter describes  
how to change each of the available settings.  
The OSD can be used with either the remote control or the front con-  
trol panel.  
Button Descriptions  
Control Panel  
Menu  
CH UP  
MENU  
CH Z  
CH Y  
MENU  
CH DOWN  
Enter  
The following sections explain how to adjust settings in the OSD  
menus with the control panel.  
OSD Setting Menus  
Main Menu  
ETC  
Brightness  
30  
Press the MENU button to enter  
The Main Menu appears.  
OSD Main Menu screen.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Brightness  
1. Press MENU to enter the OSD  
Main Menu  
menus.  
ETC  
2. Press the CH UP button or CH DOWN  
Brightness  
button to select Brightness.  
3. Press MENU. The brightness slide  
bar is highlighted.  
30  
4. Press the CH UP button to increase  
the brightness.  
60  
5. Press the CH DOWN button to  
0
decrease the brightness.  
6. Press MENU to confirm the setting  
and return to the Main menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
BRIGHTNESS  
60  
30  
0
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Contrast  
1. Press MENU to enter the OSD  
Main Menu  
menus.  
ETC  
2. Press the CH UP button or CH DOWN  
Contrast  
button to select Contrast.  
3. Press MENU. The contrast slide bar  
is highlighted.  
30  
4. Press the CH UP button to increase  
the contrast.  
60  
5. Press the CH DOWN button to  
0
decrease the contrast.  
6. Press MENU to confirm the setting  
and return to the Main menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
CONTRAST  
60  
30  
0
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Video Setting  
Video Setting  
G
R
B
Hue  
G
R
Press the MENU button to enter  
1. Press the CH UP button or CH  
DOWN button to select Video  
Setting.  
the OSD Main Menu screen.  
2. Press MENU to enter the  
Video Setting menu.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Hue  
1. Press the CH UP button or CH DOWN  
Video Setting  
button to select Hue.  
G
B
R
2. Press MENU to enter the Hue sub-  
Hue  
menu.  
G
R
3. Press the CH UP button to increase  
G
G
R
R
green and decrease red.  
4. Press the CH DOWN button to  
decrease green and increase red.  
5. Press MENU to confirm the setting  
and return to the Video Setting menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Saturation  
1. Press the CH UP button or CH DOWN  
Video Setting  
button to select Saturation.  
G
B
R
2. Press MENU to enter the Saturation  
Saturation  
submenu.  
127  
3. Press the CH UP button to increase  
255  
the saturation.  
4. Press the CH DOWN button to  
0
decrease the saturation.  
5. Press MENU to confirm the setting  
and return to the Video Setting menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
SATURATION  
255  
127  
0
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpness  
1. Press the CH UP button or CH DOWN  
Video Setting  
button to select Sharpness.  
G
B
R
2. Press MENU to enter the SHARP-  
Sharpness  
NESS submenu.  
3. Press the CH UP button to increase  
the sharpness.  
4. Press the CH DOWN button to  
decrease the sharpness.  
5. Press MENU to confirm the setting  
and return to the Video Setting menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Color Temperature  
1. Press the CH UP button or CH DOWN  
button to select Color Temp.  
Video Setting  
2. Press MENU to enter the Color Tem-  
perature submenu. There are three  
default color temperatures to choose  
from.  
G
R
B
Color Temp.  
Standard Color  
Color Temp.  
Standard  
Press the CH UP button or CH DOWN  
button to select Standard, then press  
MENU.  
Warm Color  
Color Temp.  
Warm  
Press the CH UP button or CH DOWN  
button to select Warm, then press  
MENU.  
Cold Color  
Color Temp.  
Press the CH UP button or CH DOWN  
button to select Cold, then press  
MENU.  
Cold  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Audio Setting  
Main Menu  
ETC  
Audio Setting  
Press the MENU button to enter  
1. Press the CH UP button or CH  
DOWN button to select Audio  
Setting.  
OSD Main Menu screen.  
2. Press MENU to enter the  
Audio Setting menu.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Treble  
1. Press the CH UP button or CH DOWN  
Audio Setting  
button to select Treble.  
TRE BASS  
2. Press MENU to enter the treble sub-  
Treble  
menu.  
3. Press the CH UP button to increase  
the treble.  
4. Press the CH DOWN button to  
decrease the treble.  
5. Press MENU to confirm the setting  
and return to the Audio Setting menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Bass  
1. Press the CH UP button or CH DOWN  
Audio Setting  
button to select Bass.  
TRE BASS  
2. Press MENU to enter the Bass sub-  
Bass  
menu.  
3. Press the CH UP button to increase  
the bass.  
4. Press the CH DOWN button to  
decrease the bass.  
5. Press MENU to confirm the setting  
and return to the Audio Setting menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Balance  
1. Press the CH UP button or CH DOWN  
Audio Setting  
button to select Balance.  
TRE BASS  
2. Press MENU to enter the Balance  
Balance  
submenu.  
R
L
3. Press the CH DOWN button to shift  
L
L
R
R
the balance to the left speaker.  
4. Press the CH UP button to shift the  
balance to the right speaker.  
5. Press MENU to confirm the setting  
and return to the Audio Setting menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Mute  
1. Press the CH UP button or CH DOWN  
Audio Setting  
button to select Mute.  
TRE BASS  
2. Press MENU to enter the Mute sub-  
Mute  
Off  
menu.  
On  
3. Press the CH UP button to turn the  
Audio Setting  
mute off.  
TRE BASS  
4. Press the CH DOWN button to turn  
Mute  
Off  
the mute on.  
5. Press MENU to confirm the setting  
On  
and return to the Audio Setting menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TV Setting  
Main Menu  
TV Setting  
ETC  
Press the MENU button to enter  
1. Press the CH UP button or CH  
DOWN button to select TV  
Setting.  
OSD Main Menu screen.  
2. Press MENU to enter the TV  
Setting menu.  
Note  
The setting menu is available when the currently selected source is  
TV.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TV/CATV  
1. Press the CH UP button or CH DOWN  
TV Setting  
button to select TV/CATV.  
+
CH  
A
M
-
2. Press MENU to enter the TV/CATV  
TV/CATV  
submenu.  
TV  
CATV(STD HRC IRC)  
Receiving Cable TV  
Press the CH UP button to select CATV,  
TV Setting  
+
CH  
A
M
then press MENU.  
-
TV/CATV  
TV  
CATV(STD HRC IRC)  
Receiving Broadcast TV  
Press the CH DOWN button to select  
TV Setting  
+
CH  
A
M
TV, then press MENU.  
-
TV/CATV  
TV  
CATV(STD HRC IRC)  
Note  
The default TV setting is “CATV”.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MTS  
1. Press the CH UP button or CH DOWN  
TV Setting  
+
button to select MTS.  
CH  
A
M
-
2. Press MENU to enter the MTS sub-  
menu. Select from the following  
options.  
MTS  
MAIN  
SAP  
DUAL  
MAIN  
TV Setting  
+
Press the CH UP button or CH DOWN  
CH  
A
M
button to select MAIN. A green dot  
appears and MAIN is highlighted in yel-  
low. Press MENU again to confirm the  
selection.  
-
MTS  
MAIN  
SAP  
DUAL  
SAP  
TV Setting  
+
Press the CH UP button or CH DOWN  
CH  
A
M
button to select SAP. Press MENU again  
to confirm the selection. If a green dot  
does not appear, then your service pro-  
vider doesn’t support SAP.  
-
MTS  
MAIN  
SAP  
DUAL  
DUAL  
TV Setting  
+
Press the CH UP button or CH DOWN  
CH  
A
M
button to select DUAL. Press MENU  
again to confirm the selection. One  
speaker plays the main audio signal and  
the other speaker plays the alternate  
audio signal.  
-
MTS  
MAIN  
SAP  
DUAL  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Auto Program  
1. Press the CH UP button or CH DOWN  
TV Setting  
button to select Auto Program.  
+
CH  
A
M
-
2. Press MENU to enter the Auto Pro-  
Auto Program  
ON  
gram Setting submenu.  
OFF  
3. Press the CH UP button or CH DOWN  
button to select ON or OFF and press  
MENU.  
TV Setting  
+
CH  
A
M
-
Auto Program  
ON  
OFF  
The screen shows “Auto Program...” and  
the channel indicator increments from 2  
to 69 (ANT connection) or from 1 to 125  
(CATV cable connection).  
Auto Program...  
CH. 12  
The screen displays the first channel  
that is successfully found after scanning  
is complete.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Manual Program  
1. Press the CH UP button or CH DOWN  
TV Setting  
+
button to select “Manual Program”.  
CH  
A
M
-
2. Press MENU to enter the Manual Pro-  
Manual Program  
DOWN  
gram submenu.  
UP  
CH. 4  
3. Press the CH UP button and the CH  
DOWN button to find the channel you  
want to add. Press MENU to select  
the channel.  
TV Setting  
+
CH  
A
M
-
Manual Program  
DOWN  
UP  
4. Press MENU to exit, and then access  
Channel Add/Erase function to add  
a desired channel.  
CH. 10  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Channel Add/Erase  
1. Select the channel you want to add or  
TV Setting  
delete, for example, Channel 28.  
+
CH  
A
M
-
2. Press the CH UP button or CH DOWN  
CH. Add/Erase  
Add  
button to select CH. Add/Erase.  
3. Press MENU to enter the Channel  
Add/Erase submenu. Select from the  
following options.  
Erase  
CH. 7  
Add Channel  
1. Press the CH UP button or CH DOWN  
button to select Add.  
2. Press MENU to add the selected  
channel.  
Erase Channel  
1. Press the CH UP button or CH DOWN  
button to select Erase.  
2. Press MENU to delete the selected  
channel.  
When you return to the normal TV  
screen and use the CH UP button and  
the CH DOWN button buttons to browse  
channels, the deleted channel (for  
example, Channel 28) will be skipped  
automatically.  
Note  
You can still access the deleted channel by  
entering the channel number using the  
number buttons on the remote control.  
Add the channel again if it was erased acci-  
dentally.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Favorite Channels  
1. Press the CH UP button or CH  
DOWN button to select Favorites  
CH. Edit.  
TV Setting  
+
CH  
A
M
-
Favorites CH. Edit  
2. Press MENU to enter the Favorites  
M1  
10  
M2  
10  
M3  
10  
M4  
10  
CH. Edit submenu.  
Exit  
3. The screen displays the four favorite  
TV Setting  
+
channels: M1, M2, M3, and M4.  
CH  
A
M
-
Favorites CH. Edit  
M1  
18  
M2  
10  
M3  
10  
M4  
10  
Exit  
4. Press the CH UP button and the CH  
DOWN button to select the channel  
number you want to set for M1.  
Press MENU to confirm the setting  
and move to the next favorite chan-  
nel, M2.  
TV Setting  
+
CH  
A
M
-
Favorites CH. Edit  
M1  
10  
M2  
61  
M3  
10  
M4  
10  
Exit  
5. Repeat step 4 for M2, M3, and M4.  
Note  
Access your favorite channels in TV  
mode by pressing the CH UP button and  
the CH UP buttons to switch between  
M1, M2, M3, and M4. This function is only  
available when the source is TV.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Miscellaneous Setting  
Main Menu  
ETC  
Miscellaneous  
Press the MENU button to enter  
OSD Main Menu screen.  
1. Press the CH UP button or CH  
DOWN button to select Mis-  
cellaneous Setting.  
2. Press MENU to enter the Mis-  
cellaneous Setting menu.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Language  
1. Press the CH UP button or CH DOWN  
Miscellaneous  
button to select Language.  
CH  
2. Press MENU to enter the Language  
submenu.  
Language  
English  
3. The screen displays the available  
OSD languages: English and  
T-Chinese  
T-Chinese (Traditional Chinese).  
4. Press the CH UP button and the CH  
DOWN button to select a language.  
The OSD language changes as soon  
as you select a language.  
!!!!!!!
ٽ
 
CH  
ߢ
ᙇᖗ  
૎፿  
5. Press MENU to confirm your choice.  
᜗᧯խ֮  
Note  
The default language setting is Traditional  
Chinese.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sleep Timer  
The sleep timer turns the TV off automatically after a set period of  
time.  
1. Press the CH UP button or CH DOWN  
Miscellaneous  
button to select Sleeper.  
CH  
2. Press MENU to enter the Sleeper  
submenu.  
Sleeper  
3. The screen displays the available  
sleep timer setting: Off, 30, 60, 90,  
and 120 minutes.  
off 30 60 90 120  
4. Press the CH UP button and the CH  
DOWN button to select a value.  
Miscellaneous  
CH  
5. Press MENU to confirm your choice.  
Sleeper  
off 30 60 90 120  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
OSD Display  
This setting allows you to set the amount of information that appears  
on the LCD screen when the DISPLAY button is pressed. You can  
choose from three settings: Off, Portion, or All.  
1. Press the CH UP button or CH DOWN  
Miscellaneous  
button to select OSD Display.  
CH  
2. Press MENU to enter the OSD Dis-  
play submenu.  
OSD Display  
Portion  
3. The screen displays the available  
sleep timer settings: All, Portion, or  
Off.  
All  
Off  
4. Press the CH UP button and the CH  
DOWN button to select “All”, “Por-  
tion”, or “Off”.  
5. Press MENU to confirm your choice.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Time Setting  
This section shows you how to change your TV’s clock setting.  
1. Press the CH UP button or CH DOWN  
Miscellaneous  
button to select Time Setting.  
CH  
2. Press MENU to enter the Time Setting  
submenu.  
Time Setting  
22  
:
01  
3. The screen displays the current set-  
Miscellaneous  
ting. The hour is highlighted in yellow.  
CH  
4. Press the CH UP button and the CH  
DOWN button to adjust the hour set-  
ting, then press MENU.  
Time Setting  
18  
:
01  
5. The minutes are highlighted in yellow.  
Press the CH UP button and the CH  
DOWN button to adjust the minute  
setting.  
Miscellaneous  
CH  
Time Setting  
6. Press MENU to confirm the new time  
18  
:
35  
setting.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Reset  
The Reset function returns all of your TV’s user settings to their fac-  
tory defaults.  
Warning:  
The reset function erases all of your custom and favorite channel set-  
tings, and will reset all display settings (such as contrast, brightness,  
etc.) to the factory default values. The reset function cannot be  
reversed once it begins.  
1. Press the CH UP button or CH DOWN  
Miscellaneous  
button to select Reset.  
CH  
2. Press MENU to enter the Reset sub-  
menu.  
Reset  
3. Press the CH UP button and the CH  
DOWN button to select “Yes” or “No”.  
By default, “No” is already selected  
(highlighted in yellow).  
Yes  
No  
4. Press MENU to confirm your choice.  
Exit  
Exit turns off the OSD menus and returns you to TV mode.  
1. Press the CH UP button or CH DOWN  
Main Menu  
button to select Exit.  
ETC  
2. Press MENU to exit the OSD menus.  
Exit  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
12  
Taking Care of Your TV  
Turn the power off before you begin cleaning the  
TV.  
Use a clean lens cloth to remove dust and finger-  
prints from the screen.  
Do not wipe the shell of the TV with alcohol,  
methanol, gasoline or oil products to avoid the  
damaging the finish. Wipe the shell with a dry  
soft cloth and use neutral cleaning fluids.  
GAS  
OIL  
If your model has leather components, wipe the  
leather parts with a dry cloth and keep the area  
dry. Place the TV far from sources of steam to  
avoid making the leather wet.  
Be careful to remove the power plug correctly.  
Hold the plug instead of pulling the power cord.  
Arrange the power cord with other cords to avoid  
knotting or bending which may cause fire due to  
damage or electric leakage.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
13  
Troubleshooting  
Situation  
Solution  
Connect the power cord properly.  
Press the POWER button on the control panel or  
remote control.  
Press the TV button to cycle through connected  
video sources.  
Press CHANNEL UP or CHANNEL DOWN to  
switch to other TV stations.  
Check the TV/CATV OSD settings. See “TV/CATV”  
Make sure all cables are connected properly.  
No picture and sound.  
Check the ANT and cable connections.  
Adjust the brightness in the OSD menus. See  
No picture, or poor picture,  
sound is OK.  
Adjust the saturation in the OSD menus. See “Satu-  
Picture is not in color.  
Press the VOLUME UP button on the control panel  
or remote control.  
Make sure the MTS option is set to Main or Dual.  
Picture is OK, no sound.  
One of the speakers has no  
sound.  
Adjust the balance in the OSD menus. See “Bal-  
Can’t receive some TV chan-  
nels using cable TV.  
Try the Auto Program function in the OSD “TV Set-  
Use the Reset function in the OSD “Miscellaneous”  
Want to reset TV settings.  
Cannot operate menus.  
No image but have sound.  
If OSD items are colored light blue, the system is in  
a state such that those settings are not available.  
For example, video setting is available in TV mode.  
Make sure the video signal cable is connected  
properly.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Make sure the source device is functioning properly.  
Set the volume to a higher level.  
Make sure the audio cable is connected securely.  
Turn the mute off.  
No sound but have image.  
Screen image turns over.  
Snow appears on the screen.  
Make sure the video signal cable is connected  
properly.  
Adjust the location of the ANT, placing it far from  
roads or sources of interference.  
Check the ANT and the video signal line connec-  
tions.  
Readjust the sharpness setting.  
Choose programs with high quality signals.  
Adjust the direction of the ANT or change the video  
signal cable.  
Blurred or overlapped images.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Specifications  
Item  
Specifications  
LT01-10A1  
9.6-inch TFT  
4:3  
LCD Panel Size  
Aspect Ratio  
Best Resolution  
Maximum Display Area  
TV System  
800 (horizontal) x 600(vertical)  
146.8 mm (H) x 195.4 mm (W)  
NTSC  
AV1: CVBS RCA jack  
AV2: S-Video or CVBS: 10-pin mini-DIN  
Video System  
Audio System  
(Input) AV1: RCA left & right jacks  
(Input) AV2: RCA left & right jack on 10-pin mini-DIN  
(Output) 3.5mm ø headphone jack  
Built-in Speakers  
2W + 2W  
Power Supply  
100~240 V,AC, 50/60 Hz adapter 12V DC  
40W (Average)  
Power Consumption  
Power Consumption (Standby)  
Optional Accessories  
Weight (including base)  
Dimensions (including base)  
5W max. (at 110Vac/60Hz)  
External Speakers  
2.87kg  
284.74 mm (H) x 340.56 mm (W) x 147.53 mm (D)  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
15  
Glossary  
Aspect Ratio The ratio of width to height of a film, image or display screen.  
Broadcast TV Broadcasting video signals using high-frequency electromagnetic  
waves to distribute television channels to viewers (standard TV broadcast).  
CATV Community Antenna Television, the original name for cable TV. A television  
distribution system that uses coaxial cable instead of the traditional radio broad-  
casting (over-the-air) method to deliver television, FM radio, and other services to  
consumers.  
Color Temperature Adjusting the color temperature enables you to set the inten-  
sity of white light. Color temperature is measured in Kelvin (K). Higher color tem-  
peratures result in a blue tint. Lower temperatures result in a red tint.  
Hue Colors in a color system are measured by hue, saturation and luminance.  
Hue indicates the predominant color.  
LCD Liquid Crystal Display. A display technology that uses rod-shaped molecules  
(liquid crystals) that flow like liquid and bend light.  
MTS Multi-channel Television Sound. Enables reception of audio other than the  
primary (MAIN) audio signal. DUAL enables reception of a stereo audio signal,  
while SAP (Second Audio Program) enables reception of a separate channel that  
may be a different language or completely different information such as the news.  
RCA connector An RCA or phono connector is a plug and socket for a two-wire  
(signal and ground) coaxial cable that is widely used to connect audio and video  
components. RCA sockets are commonly found at the rear of A/V equipment.  
RCA jack An RCA jack enables you to attach the 4-IN-1 cable to a device socket.  
Refer to “.Checking Package Contents” on page 17.  
SAP Used with SAP and NTSC, enables broadcast of the main broadcast signal on  
one speaker, and the alternate audio speaker on the other speaker.  
Saturation Chromatic purity indicating the amount of white contained in a color.  
Fully saturated colors are pure colors; less saturated colors appear as pastel  
shades.  
S-Video Super-video, a video cabling standard used to transmit video by keeping  
brightness (Y) and color information (C) on separate channels. Most often used with  
camcorders, VCRs, and quality receivers and amplifiers to provide sharper pictures.  
VCD A compact disk format developed in 1993 by Sony and Philips to capture full-  
motion video. A standard Video CD can hold 74 minutes of near VHS-quality video  
and CD-quality sound.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Grizzly Smoker H6255 User Manual
Hamilton Beach Slow Cooker 33966 User Manual
Harman Kardon DVD Player DVD 23 User Manual
Honeywell Switch R182J User Manual
Honeywell Thermostat 69 1815EFS 04 User Manual
Hotpoint Oven BS89EK User Manual
HP Hewlett Packard Toaster 8508A User Manual
IBM Computer Drive 61X User Manual
IBM Computer Hardware 8122 User Manual
Ice O Matic Water Dispenser IFI4C User Manual