Contents
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright
© Copyright 2011 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying
and distribution. No part of this manual may be reproduced in any form by any means without the prior written
authorization of Hannspree. The TV described in this manual may include copyrighted software of Hannspree (or
other third parties). Hannspree (or other third parties) preserves the exclusive rights for copyrighted software, such
as the right to distribute or reproduce the copyrighted software. Accordingly, and to the extent allowed by applicable
law, any copyrighted software contained in the product described herein shall not be distributed, modified, reverse
engineered, or reproduced in any manner without the prior written authorization of Hannspree (or of other third
parties).
The Hannspree logos presented herein are trademarks of Hannspree. All other product names, trademarks or logos
mentioned herein are used for identification purpose only, and may be the trademarks or registered trademarks of
their respective owners.
The purchase of the product described herein shall not be deemed to grant, either directly or by implication, estoppel
or otherwise, any license under the copyrights, patents, patent applications or trademarks of Hannspree, except for
the normal, non-exclusive use that arises by operation of law in the sale of a product.
RECYCLING INFORMATION
We, the Hannspree care very much about our environment protection strategy and firmly believe that it helps us have
healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels.
On the contrary, other material can be classified to hazardous and poisoned substances. We strongly encourage you
to contact the provided information to recycle this product.
For more information, please visit
According to WEEE regulation, this TV can’t be handled as normal trash in Europe when it is out of usage.
Please refer to the recycle information from our website to handle it.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
• The LED TV is for entertainment use only and visual display tasks are excluded.
•
This device uses a VGA connector to connect to a PC. To reduce the influence of main frequency on the source
signal, use a VGA monitor cable with ferrite shield.
Preface
Thank you for purchasing a Hannspree LED TV. Your new TV will allow you to enjoy superior audio and video while
enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using or operating your TV. To ensure the safe and
correct installation and operations of the TV, it is important that the safety and operation instructions in this manual
are followed.
This instruction manual is designed to assist you in setting up and using the TV. The information in this manual
has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The
information in this manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not be liable for direct, indirect, special,
exemplary, incidental or consequential damages arising from any defect or omission in this manual, even if advised
of the possibility of such damages in advance.
Warranty and Service / Repair
For complete warranty service information, please refer to the “Warranty Card” enclosed with your TV.
Service and Repair Information for United Kingdom:
Should the need for service arise, please contact HANNspree Technical Service Center and refer to the warranty
card for the Terms and Conditions.
Please visit HANNspree Europe Website:
and go to the “Service” – “Repair Service” section.
Packing Material Disposal:
Please refer to your local laws and directives to ensure an environmentally safe disposal.
Keep this manual for later use.
Cleaning
Instruction for cleaning the TV
1 Clean your TV frequently with a soft cloth to remove dust and dirt. More persistent dirt can be removed with a moist
cloth with soft soap.
2 Do not use detergents or any other aggressive cleaning. This might damage the housing or screen surface.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Getting Started
Package Contents
Make sure the following components are included in the box. Please contact Hannspree Customer
Service immediately if anything is missing or damaged.
Quick Start
Guide
W
arranty Card
User's Manual
TV
User’s manual
Quick start guide
Warranty card
Remote control
and batteries
SCART adapter
TV stand
Screws
Simple screwdriver
Introducing the TV
You can watch DVB-T, DVB-C broadcast, cable, or digital television channels, and easily connect a
VCR, STB or DVD player to the SCART, HDTV (Component), and HDMI input ports (location of these
ports depends on model). You can also use the TV as a monitor for your PC by connecting it through
the VGA port.
Convenient control buttons located on the TV and a handy remote control let you change channels,
adjust the volume, and change display settings through an easy-to-use on-screen display menu system.
The built-in stereo speakers provide full rich sound and a convenient audio output port lets you connect
to an external audio system or earphones.
Features
•
TV Tuner: Built-in TV Tuner (analog, DVB-T,
DVB-C)
•
Teletext (TV RF+SCART) 1.5v. with 1000
pages memory
•
Audio/ Video support:
– SCART input
– VGA (PC) input
•
•
Built-in stereo speakers
Image Enhancement Technology
– 3:2/2:2 pull down (24P)
– 3D Comb Filter
– HDMI inputs
– HDTV (Component) input
– R/L audio inputs
– VGA(PC) audio input
– 3.5 mm stereo earphone output
– SPDIF output
•
•
•
•
•
Noise Reduction
Advanced 3D de-interlacing
Edge Enhancement
HDTV (32”)
PVR and Time Shift functions
•
On-Screen Display (OSD) menu system
Note:
• The supporting devices mentioned in this manual may vary on different models. For more information, please
refer to the manufacturer’s user manual or the Quick Start Guide of your TV model.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Foot Stand Installation
1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
n
n
Install only with another person’s assistance.
Make sure to distinguish between the front and back of the stand when assembling them.
2 Attach the foot stand and secure it with the included screws. Please fasten with a cross screw driver.
Disconnecting the Stand
1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2 Remove the screws and detach the stand from the TV.
Installing the LED TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. Hannspree bears no
responsibility for improper mounting or mounting that results in accident or injury. You can ask a
qualified service personnel about using an optional bracket to mount the TV to the wall.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on
installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician
for assistance when installing the wall mounted bracket. Hannspree is not responsible for any damage
to the product or injury to yourself or others if you select to install the TV on your own.
n
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.
VESA-compatible wall bracket
(WxH)
Mount holes
number
Screw type
Maximum loading
100x100 mm
4
Metric 4 x 12 mm
60 kg
1 Purchase a VESA compatible wall bracket (please refer
to the table above).
2 Locate your ideal TV position on the wall.
3 Fix the wall bracket firmly on the wall.
4 Secure the TV to the bracket using the 4 mount holes on
the back and center of the TV.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper
ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the
internal temperature of the product. Install the product so that the required distances shown in the figure
are kept.
n
When using a stand or wall-mount, use parts provided by Hannspree only.
When installing the product with a stand
When installing the product with a wall-mount
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Note:
•
Please read the instructions of your specific wall bracket to properly wall mount the TV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel
1
2
3
4
5
6
No. Description
Button Function
Press to increase the program number or move upward to
the previous item on the OSD menu.
During standby mode, press to turn the TV on.
P
P
1
Program select
Press to decrease the program number or move downward
to the next item on the OSD menu.
During standby mode, press to turn the TV on.
Press to increase the volume or move to the right on the
OSD menu.
VOL +
VOL -
2
Volume adjust
Press to decrease the volume or move to the left on the OSD
menu.
3
4
Menu
Input
MENU Press to turn the on-screen display (OSD) menu on / off.
INPUT Press to confirm the selection on the OSD menu.
5
Power
Press to turn the TV on or off.
Used to detect the current level of visible light in the
surrounding environment.
Light sensor and Remote IR
sensor
6
Receive incoming remote control commands.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Input and Output Jacks
Please refer to the front cover illustration for the Input & Output location.
No. Description
Connector
Function
Connect to a digital audio output device such as
a home theater.
1
2
SPDIF
Connect to earphones or external speakers with
built-in amplifier.
Earphone Output
CI SLOT
3
CI
Connect to a CI device (the CI slot as CI+).
HDMI
1
Connect an HDMI equipment or an HDMI-DVI
adapter cable to devices such as a DVD player
or set-top box.
HDMI 1/HDMI 2/
HDMI 3 Input
4
2
3
USB
Connect to a USB device such as a USB flash
5
6
7
USB
drive or USB hard disk drive.
VGA (PC IN)
Cable/Antenna
Connect to a PC’s VGA port.
Connect to an antenna or cable TV.
Connect to an external device, such as a VCR,
STB, or a DVD player using the included SCART
adapter cable.
8
9
SCART Adapter
PC Audio Input
Connect to a PC’s line / audio port.
Connect to an external device, such as a VCR,
STB, or a DVD player.
10 Component Inputs
VIDEO Pr
Pb
Y
R-AUDIO-L
COMPONENT
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
1 Source
press to select a subtitle
language available for
selected digital TV program.
Press to select the input
signal type selections.
1
2
12
12 Power
Press to turn the TV on or off.
2 Keypad
Press to select a program
directly. Press 0-9 to enter
the program numbers (press
1 and 0 for program 10).
13 Guide
Press to display detailed
programming information for
channels (only for DTV).
3
4
13
14
3 ECO
14 Exit
Press to toggle ECO
dynamic backlight setting.
5
Press to exit the menu screen
or Teletext.
15
16
6
7
4 Menu
15 OK
Press to access the main
menu, return to the previous
menu, or exit the menu
screen.
Press to enter a submenu or
activate a setting; to freeze/
unfreeze the picture in digital
TV mode.
8
17
9
10
11
18
19
5 Arrows
20
16 Return
pqTo navigate in the
main menu, to select menu
options, to switch to the
previous or next photo, song,
or video in USB mode.
Press to return to the
previous channel; to return
to the previous menu in USB
function.
17 Select program
tu(*Zoom +-) To navigate
in the main menu; to set
functions and change values.
ucan also be used to open
the corresponding submenu.
* To select the picture format.
Press P
program number. Press
to decrease the program
number.
to increase the
8 Volume adjust
Press + to increase audio
P
volume. Press - to decrease
audio volume.
18 List
To display channel list.
9 Mute
6 Option
Press to toggle the sound off
and back on again.
Press to display the Quick
Access menu: Picture preset,
Sound preset, Time shift,
PVR, Schedule list, and
USB.
19 TV
Press to access conventional
analogue TV mode.
10 Teletext mode
Press to toggle teletext on or
off.
20 Color buttons
Press the colored buttons to
perform specific tasks in the
OSD menu or teletext mode.
Blue (Lang): To select a
sound type available for
selected analog TV program,
to select an audio language
available for selected digital
TV program.
11 Subtitle
7 Info
With an ATV source, if teletext
mode is activated and the
teletext has a subtitle page,
press to display the subtitle
page. With a DTV source,
Press to display program
information (if available).
Inserting Batteries (Battery size: AAA)
Notes:
• For best results, use the remote control within a proper distance
from the front of the TV. Do not exceed an angle of 30 degrees
when pointing at TV.
• The operational distance may be shortened when the signal
sensor is directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and
ensure that there are no obstacles between them.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Setting up your TV
Power Connection
Insert the plug at the end of the power cord into a power outlet.
Rear Connections
See the illustration and table below for device connection instructions.
* Typical Layout
SPDIF
Connection Order
HDMI is the best way to connect a device. If it’s not
available, move down the list in order until you find a
connection that’s available on each device.
CI SLOT
HDMI
1
HDMI
Component
1
3
2
2
3
SCART
USB
VIDEO Pr
Pb
Y
R-AUDIO-L
AUDIO
ADAPTER
SCART
CABLE/ANTENNA
DTV/TV
VGA
COMPONENT
PC IN
PC IN
1
2
HDMI
Component
HDMI
1
VIDEO Pr
Pb
Y
R-AUDIO-L
AUDIO
A
COMPONENT
PC IN
S
HDMI
2
3
Use HDMI to connect
external devices when
available. If not available, use
Component.
Use COMPONENT to
connect with the AV
devices.
USB
Pr/Cr
Pb/Cb
Y
R
L
3
SCART
Antenna/Cable
Use this connection when you need to connect directly to
an antenna or cable system instead of using a cable box.
Y
R-AUDIO-L
AUDIO
ADAPTER
SCART
CABL
ONENT
PC IN
D
Use SCART to
connect with the
AV devices that are
equipped with the
SCART connectors
using the included
SCART adapter
cable.
AUDIO
ADAPTER
SCART
CABLE/ANTENNA
DTV/TV
VGA
PC IN
PC IN
Be careful not
to bend the
copper wire.
RF Coaxial Wire (75 Ω)
SCART
Cable TV
Antenna
Or
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV
Turning the TV On and Off
1 Press
2 Press
on the control panel or remote control to turn the TV on.
again. The power LED turns red, indicating that the TV is off.
Running Setup Wizard
The Setup Wizard is displayed on the screen when you turn on your LED TV for the first time.
Note:
• Press p/qon the remote control to move through the menu. Press OK to select.
1 The Wizard appears to guide you through
the initial setup. Press OK to start.
2 Select your language for the on-screen
display (OSD) menu.
Initial Setup
Welcome
Initial Setup
Language
Please select your language:
English
Welcome to use the Wizard for Initial Setup !!
Please press [OK] to start the wizard.
Hrvatski
Dansk
Exit
Back
Select
Next
Exit
4 Select your tuner mode.
3 Select your country.
Initial Setup
Tuner Mode
Initial Setup
Country
Please select your tuner mode:
Please select your country:
Air
Spain
Finland
Cable
France
United Kingdom
Italy
Exit
Back
Select
Next
Exit
Exit
Back
Select
Next
Exit
5 Select Scan and press OK for channel
6 The channel scan may take a while to
scan.
complete.
Initial Setup
Channel Scan
Initial Setup
Channel Scan
First, please connect antenna.
Start channel scan now?
The channel scan may take a while to complete.
Status: Scanning.
Analog channels: 0
Digital channels:0
If you skip this step, the channel scan could be performed in Menu.
Scan
Skip Scan
8%
Exit
Exit
Back
Select
Next
Exit
Cancel
12
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Once the automatic search ends, select
8 Press OK when initial setup is completed.
your location.
Initial Setup
Location
Initial Setup
Complete
Please select your location:
Home
Shop
Congratulations !!
Completed Initial Setup.
Please press [OK] to exit.
Exit
Back
Select
Next
Exit
Back
Note:
• In Home mode, TV will be powered off
automatically if there is no operations in 4 hours.
Source
Selecting Your Content Source
TV
You can watch cable or broadcast TV, play DVD or connect to your PC.
To select the source signal:
• Press Source on the remote control. The Input Source menu
appears.
CMP
AV
No label
No label
No label
No label
No label
No label
VGA
HDMI1
HDMI2
HDMI3
• Press p/qto highlight the desired source, then press OK to
confirm.
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1 Press MENU on the control panel or press Menu on the remote control to enter the TV menu.
2 Select Tuner mode.
3 Select Channel install > Automatic search.
4 Select Country and press OK.
5 Select the signal type.
6 Press OK/uon the remote control to run the channel search.
Setting Up Your Favorite Channels
1 Press LIST.
2 Press the yellow button to enter Channel list selection. Press p/qto select the favorite list you
want to set up your favorite channels. Then press OK to enter the selected list.
3 Press the blue button to start to edit your favorite list. Press p/qto scroll through the channel list
and press OK to select it.
n
Repeat this procedure to setup other favorite channels.
4 Press LIST/Exit to exit.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the ECO Dynamic Backlight
1 Press Menu on the remote control to display the main menu.
2 Select Picture > ECO Dynamic back light.
3 Press t/uto select the desired setting. At this time, the Picture preset option under Picture will be
set at Personal synchronically.
4 Press Exit to close the menu.
Focus window position indicator
Using the PAP Function
1 Press Menu on the remote control to display the
main menu.
2 Select Setup > PAP and press OK/uto enter its
submenu.
3 To activate the PAP function, press t/uto select
On.
4 Press t/uto set the position of the TV window.
5 Press t/uto toggle the focus window.
6 When focus is on TV window, the digit buttons and P
/P
work in TV. When focus is on other
windows, P /P can change available extension sources.
Customizing the Input Settings
1 Press Menu on the remote control to display the main menu.
2 Select TV > Input settings and press OK/uto enter its submenu.
3 Press p/qto select a connector your equipment is connected to.
4 Press t/uto select the device type that is attached to this connector.
5 Press Menu to return to the TV menu.
Note:
•
After configuring the above setting, the selected source label will be displayed after the name selected in the
source list.
Changing Your Location
1 Press Menu on the remote control to display the main menu.
2 Select Setup > Location.
3 Press t/uto select your location (Shop or Home).
4 Press Exit to close the menu.
Resetting to Factory Default Settings
1 Press Menu on the remote control to display the main menu.
2 Select TV > Reset and press OK/uto enter its submenu.
3 Use the digit buttons to enter the password.
4 Press ◄/► to select OK and press OK to confirm.
5 The Initial setup menu appears. Follow the on-screen instructions.
Note:
• The default password is 1234.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV
settings. The OSD menu can be accessed conveniently through the buttons on the remote control.
Before going into details of each OSD option, you may get acquainted with the placement of the OSD
system:
Main Menus:
Display the main menus.
Picture
Picture
Sound
TV
Setup
Parental
Picture preset
Brightness
Contrast
Personal
52
90
55
4
Saturation
Sharpness
OK
Enter
Select
Exit
ECO Dynamic back light
Color temperature
Screen mode
Auto
Cool
Menu
Exit
16:9 format
On
Exit
Auto format
Instructions:
Adjustable Options:
Quick instructions for adjusting the
settings.
Display the setting/value of the adjustable
options.
Function
TV Control Panel
Remote Control
Menu
OSD Menu
Up
MENU
P
Arrow p
Arrow q
Down
P
Select/ Increase
Select/ Decrease
Return
VOL +
VOL -
MENU
Arrow u
Arrow t
Menu
15
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Menus Selection
Follow the instructions indicated on the left side of the OSD Function Menu.
•
•
•
•
Press P
/P
on the control panel or p/qarrow keys to scroll through the menus.
Press VOL + on the control panel or the uarrow key to enter a correspond submenu.
Press VOL +/VOL - on the control panel or the t/uarrow keys to adjust the desired setting.
Press MENU on the control panel repeatedly or Exit to exit the OSD menu.
Picture
Option
Description
Select a preset view option optimized for different viewing
conditions (ECO/Vivid/Studio/Personal/Movie).
Picture preset
Brightness
Contrast
Adjust the base level of the signal in the picture (0~100).
Adjust the gradient of the video signal (0~100).
Adjust the color intensity (0~100).
Saturation
Tint
Adjust the balance of the red, green, and blue colors of the
display (-32~32).
(only shown on NTSC system)
Sharpness
Adjust the sharpness or softness of the display (0~7).
Select the ECO Dynamic back light setting
(Auto/Low/Middle/High).
Eco Dynamic back light
Select the color temperature in the display
(Normal/Warm/Cool).
Color temperature
Screen mode
Select the aspect ratio of the display
(Cinerama/ 14:9 Zoom/16:9 Zoom/16:9 Zoom up/
16:9 format/ 4:3 format/Wide Zoom/Zoom 2/Wide Zoom 2/
Stretch Zoom).
Cinerama
16:9 Zoom
14:9 Zoom
16:9 Zoom
up
16:9 format
Wide Zoom
4:3 format
Zoom 2
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen mode
Wide
Zoom 2
Stretch
Zoom
Enable/disable the aspect ratio selection automatically
(On/Off).
Auto format
Advanced video
Reduce the noise level
Noise reduction
(High/Off/Low).
Enable/disable the light sensor to
detect the current level of visible light in
the surrounding environment
Light sensor
(On/Off).
VGA
Auto adjust (Sychronize the display automatically).
(only shown on VGA source)
Adjust the position of the image left and
right (0~100).
H. Position
V. Position
Phase
Adjust the position of the image up and
down (0~100).
Adjust to reduce horizontal noise
(0~31).
Clock
Adjust to reduce vertical noise (0~255).
Enable/disable Active Contrast function (Automatic backlight
control function based on average luminance of input pattern)
(On/Off).
Active Contrast
* If Active Contrast was set as On, the ECO Dynamic back light &
Light sensor function will be disabled.
Note: The options available on the OSD may vary depending on the input signal source.
Sound
Option
Description
Select a preset audio option optimized for different sounding
conditions (Rock/Pop/Live/Dance/Techno/Classic/Soft/Personal/
Off).
Sound preset
Adjust the sound balance between the left and right speakers
(-50~50).
Balance
Adjust the audio delay setting in millisecond (0~1000).
* This option is only available for digital channels.
Audio delay
Wide stereo
Enable/disable the wide stereo feature (On/Off).
Select to automatically adjust the volume.
* This option will only appear when the input source is TV.
Auto volume control
Sound type
Type
Select the sound type setting (Stereo/Dual1/Dual2/Mono).
Select the sound type mode (Normal/Visually impaired).
Visually impaired
(only available when Type is set
to Visually impaired)
Speaker
Turn on or off the speaker (On/Off).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Visually impaired
(only available when Type is set
to Visually impaired)
Turn on or off the headphones
(On/Off).
Headphones
Volume
Adjust the volume level (0~100).
Note: The options available on the OSD may vary depending on the input signal source.
TV
Option
Description
Language
Menu language
Set the on-screen display language.
Set the audio language.
Preferred audio
language
Preferred audio
language 2nd
Set the second audio language.
Country
Select your country.
Tuner mode
Air/Cable
Select the tuner mode type.
Channel install
Automatic search
Scan the channel search automatically
based on the selected tuner mode.
Automatic update
Update the channel search
automatically if you are receiving TV
channels with an antenna.
* only on Air mode
Analog manual scan
Air manual installation
Scan the analog channel search
manually.
Scan the channel search manually if
you are receiving TV channels with an
antenna.
* only on Air mode
Cable manual
installation
Scan the channel search manually if
you are receiving TV channels with a
cable.
* only on Cable mode
Clean channel list
Channel skip
Reset all scanned channels.
Skip viewing the selected TV channel.
Sort the TV channel list.
Organiser
Channel sort
Channel edit
Edit the TV channel list.
Input settings
Set the device name
CMP Name
AV Name
(No label/DVD/Blu-ray/HDD/DVDR/HD
rec./Game/VCR/PC/Digital STB/HD dig
STB/Camera/Recorder/Other).
Select the AV input type
(Auto/S-Video/RGB/CVBS).
AV video input
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Input settings
Set the device name
VGA Name
(No label/DVD/Blu-ray/HDD/DVDR/HD
rec./Game/VCR/PC/Digital STB/HD dig
STB/Camera/Recorder/Other).
HDMI1 Name
HDMI2 Name
HDMI3 Name
Decode
Decode analog channels.
Display the diagnostics information about the TV.
* Only available for digital channels.
Diagnostics
Time Shift
Enable/Disable the time shift feature (On/Off).
Reset all LED TV operational settings to the factory default
settings (OK/Cancel).
* Restores all settings to factory defaults, including Picture,
Sound, Password, Country, Language, and TV program settings.
Reset
Note: The options available on the OSD may vary depending on the input signal source.
Setup
Option
Description
PAP
Enable/Disable the PAP feature (On/
Off).
PAP
TV position
(only available when
PAP is set to On)
Set the TV window position
(Left/Right).
Subtitle
Enable/Disable the subtitle
(On/Off).
Subtitle
Digital subtitle language Set the subtitle language for digital
broadcast.
Digital subtitle language
2nd
Subtitle
Subtitle type
Select the subtitle type mode (Normal/
Hearing impaired).
Set the decoding page language for teletext display (Arabic/
Byelorussian/West EUR/East EUR/Russian/Russian-2/Greek/
Turkish/Arabic/Hebrew/Farsi).
Decoding page language
Digital teletext language
SPDIF type
Set the teletext language for digital broadcast.
Select the SPDIF type mode (PCM/Off/Dolby D).
SPDIF Delay
(only available when SPDIF type
is set to PCM)
Adjust the SPDIF delay time to synchronize the sound with the
picture (0~1000).
To search for CEC devices connected to the HDMI sockets of the
TV and enable one-touch play and one-touch standby between
CEC devices (On/Off).
T-Link
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Access common interface services.
* This menu option is only available if the common interface
module is correctly inserted and activated. The on-screen
applications and content are provided by your digital TV service
operator.
Common interface (the CI slot as
CI+)
Location
Set your current location (Home/Shop).
Software update
Timer
Enable you to install the latest version of the software if available.
Time zone
Clock
Set the time zone.
Set the clock settings.
- Auto synchronization (On/Off)
- Power on timer (Off/Daily/Once)
- Power on channel
(only available when Power on time
is set to Daily/Once)
- Power off timer (Off/Daily/Once)
Sleep timer
Set the timer to turn the TV off at the
preset time.
Parental
Option
Description
Block any channels that you do not want to watch or that you do
not want your children to watch.
Channel lock
Parental rating
Input lock
Prevent children from watching certain
Age rating
TV programs, according to the ratings
limit set (None/4~18).
Select the input source that you want to block (TV/CMP/AV/VGA/
HDMI1/HDMI2/HDMI3).
Front panel lock
Installation lock
Enable/Disable the front panel lock feature (On/Off).
Enable/Disable the Installation lock (On/Off).
Set the maximum volume (0~100).
Max volume
Change password
New password
Set the new password.
Enter the new password again to
confirmation.
Confirm password
Reset all parental settings to the factory default settings (OK/
Cancel).
Clean all
Note:
•
•
The default password is 1234.
The Channel lock is only accessible in TV mode.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Center Menu
Your TV is equipped with a USB connector that enables you to view photos, listen to music, or watch
videos stored on a USB storage device.
2
3
USB
USB
Device
File Format
USB 2.0 device
File System
Photo file format
USB memory, USB card reader
FAT/FAT 32/NTFS
JPEG (*.JPG)
MPEG1 (*.MP3) Bitrate: 32k, 64k, 96k, 128k, 196k, 256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
Music format
MPEG1/2 (*.AVI, *.MPG, *.MPEG, *.TS)
MPEG4 (*.AVI, *.MP4)
Video file format
H.264 (*.AVI, *.MP4, *.TS)
Plug a USB device to the USB connector on
the TV. When this USB device is detected, it
enters the Media Center menu directly.
Media Center
Photo
Music
Video
OK
Exit
Select
Enter
Exit
Viewing Photos
1 Select Media Center > Photo, then press OK to enter the main file content browser.
2 In the main file content browser, use p/q/t/u to select a photo or an inner file folder.
n
Select an inner file folder, press OK to enter a sub file content browser.
n
Press Menu to display the photo menu in the folder mode.
- Sort: Sort folders and photos by Date or Name.
- Edit: Copy, Paste, or Delete a selected photo.
- Parser: Select Recursive to display photos from all sub file folders.
3 Select a photo, press OK to view in full screen, and a slide show begins from the selected photo.
n
Press Menu to display the photo menu in the browser mode. You can play, pause or rotate the
photo, and set other related slide show settings.
4 Press OK to pause the slide show.
Press p/q to view the previous or next photo.
n
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Music
1 Select Media Center > Music, then press OK to enter the main file content browser.
2 In the main file content browser, use p/q/t/uto select a song or an inner file folder.
n
Select an inner file folder, press OK to enter a sub file content browser.
n
Press Menu to display the music menu in the folder mode.
- Sort: Sort folders and songs by Name, Genre, Artist, or Album.
- Edit: Copy, Paste, or Delete a selected song.
- Parser: Select Recursive to display songs from all sub file folders.
3 Select a song, press OK to play, and an automatic playback begins from the selected song.
n
Press Menu to display the music menu in the browser mode. You can play or pause the song,
select different play mode, and set other related playback settings.
4 Press the related buttons on the remote control to perform the available functions shown on the
function bar at the bottom of the TV screen.
Watching Videos
1 Select Media Center > Video, then press OK to enter the main file content browser.
2 In the main file content browser, use p/q/t/uto select a video or an inner file folder.
n
Select an inner file folder, press OK to enter a sub file content browser.
n
Press Menu to display the video menu in the folder mode.
- Sort: Sort folders and videos by Type, Date, or Name.
- Edit: Copy, Paste, or Delete a selected video.
- Parser: Select Recursive to display videos from all sub file folders.
3 Select a video, press OK to play, and an automatic playback begins from the selected video.
n
Press Menu to display the video menu in the browser mode. You can play or pause the video,
select different play mode, and set other related playback settings.
4 Press the related buttons on the remote control to perform the available functions shown on the
function bar at the bottom of the TV screen.
Time Shift Function
Allows you to record the TV program so that you won’t miss the favorite part even if you go out. Before
you use the function, connect a USB device to the TV first. For the first time, you should do the disk
setup for the USB device.
1 Press Menu on the remote control and select TV > Time shift.
2 Press t/uto select On to switch on the time shift function, then
Quick Access
press Exit to close the menu.
Picture Preset
Sound Preset
3 Press Option on the remote control and select Time shift, then
Time shift
press OK to confirm.
PVR
4 Follow the directions on the screen to do the setup.
Schedule List
USB
5 After the disk setup is done, press Option and select Time shift.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Press OK to display the time shift menu.
n
n
n
Press the red button to pause the picture and begin the time shift.
Press the red button to play the recorded part.
When the time shift menu disappears and only the timing of the time shift remains on the screen,
you can press the red button or OK to call out the time shift menu.
n
n
Press the green button to fast backward or the yellow button to fast forward.
Press the blue button to quit the time shift function.
Notes:
• Before you plug the USB device to TV, make sure you have backed up the data in the device to avoid the
unusual performance make your important data lost.
•
•
We recommend you use a USB device with the free file size bigger than 1Gb and disk speed faster than 5.0M/
sec.
The bigger file size for the time shift, the longer you can record the program.
• If changing channel in time shifting, a message prompts to let you select Yes or No. You can select Yes to exit
the time shift function and execute the channel change.
PVR (Personal Video Record)
This function allows you to record your favorite TV program to a USB device.
1 Plug a USB device to the USB connector on the TV.
Quick Access
Picture Preset
2 Press Option on the remote control and select Quick access >
Sound Preset
PVR.
Time shift
3 Press OK/uto enter.
PVR
Schedule List
4 Press the red button to start recording. A PVR mini panel appears
USB
on the screen to indicate the recording progress.
n
n
Use p/q/t/uto adjust the recording duration.
Press the green button to stop recording manually. Otherwise, the recording will stop
automatically when the recording duration is complete.
n
The recorded file is saved into a PVR folder in Media Center > Video > pvr.
5 To watch the recorded program, exit the PVR mode first and switch to USB mode. Go to Media
Center > Video and select the desired recorded file in the PVR folder. Press OK to play.
Notes:
• When CI+ card is used, this function will be disabled.
• This function is only available for digital channels.
• This function only supports USB device of FAT32 format.
• Before you plug the USB device to the TV, make sure that you have backed up the data in the device to avoid
the unusual performance that might cause data lost.
• The bigger storage size of the USB device for PVR function, the longer you can record the program.
• If you want to switch the channel or signal source during recording, it will prompt you whether to stop recording,
select OK if you want to save the recorded data. Then switch to a new channel or signal source.
•
The TV can not play files normally if the file parameters exceed the system limitations, the file format is not
supported, the file is damaged, or the file can not be decoded.
•
Do not unplug the USB device when the system is recording data or reading a file. This may cause system or
device malfunction.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Troubleshooting
Situation
Solution
•
•
Connect the power cord properly.
Check if the power LED is on or not.
•
•
Press
on the control panel or remote control.
Press Source on the remote control to select the
connected video sources.
No picture and sound.
•
•
Press P
or P
on the remote control or the control
panel to switch to other TV programs.
Make sure all cables are connected properly.
No picture, or poor picture, sound
is OK.
•
•
Check the antenna and cable connections.
Adjust the Brightness in the Picture menu.
Picture is not in color.
•
Try the Picture preset function in the Picture menu.
•
•
•
Make sure the source device is functioning properly.
Make sure the audio cable is connected securely.
Turn the mute off.
Picture is OK, no sound.
•
Press VOL + on the control panel or
+ on the remote
control.
One of the speakers has no sound.
•
•
Adjust the Balance in the Sound menu.
Try the Automatic search function in the TV menu.
Use the Reset function in the TV menu.
Cannot receive some TV channels
using cable TV.
Want to reset TV settings.
Cannot operate menus.
Screen image turns over.
•
•
If OSD items are colored in gray, the system is in a state
such that those settings are not available.
•
•
Make sure the video signal cable is connected properly.
Adjust the location of the antenna, placing it far from roads
or sources of interference.
Check the antenna and the video signal line connections.
Snow appears on the screen.
Blurred or overlapped images.
•
•
•
•
Adjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or replace the video
signal cable.
•
•
•
•
Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged in.
Make sure the path between the remote control and the
sensor is clear.
Remote control doesn’t work.
•
Try operating the remote control at a closer distance to the
TV.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Support Timing
PC Mode Support Timing
Video Mode Support Timing
Resolution (active dot) HDMI/Component
Resolution
Frequency
640 x 480
60Hz
480i
576i
V
V
640 x 480
800 x 600
75Hz
60Hz
480p
V
800 x 600
1024 x 768
1024 x 768
1360 x 768
75Hz
60Hz
75Hz
60Hz
576p
720p
V
V
V
V
1080i
1080p
6. Specifications
Model No.
AD32U
DISPLAY
Screen Size
Aspect Ratio
Resolution
81.2 cm / 32 inches
16:9
1366 x 768
OSD Language
English, Spanish, French, German, Italy, Czech, Croatian,
Danish, Hungarian, Dutch, Norwegian, Polish, Portuguese,
Romanian, Slovak, Slovenian, Serbian, Finnish, Swedish,
Turkish, Greek, Bulgarian, Russian, Latvian, Lithuanian,
Estonian, Ukrainian
ENHANCEMENT
Sound Output (RMS Watts)
Sound Mode
5W + 5W
Rock, Pop, Live, Dance, Techno, Classic, Soft, Personal, Off
Picture Format
Cinerama, 14:9 Zoom, 16:9 Zoom, 16:9 Zoom up, 16:9 format,
4:3 format, Wide Zoom, Zoom 2, Wide Zoom 2, Stretch Zoom
Picture Mode
ECO, Vivid, Studio, Personal, Movie
CONNECTION
Rear Connectors
Side Connectors
- Tuner Input (75 Ω)
- PC IN: D-SUB and PC Audio
- SPDIF Output
- Earphone Output
- Common Interface
- Component Input
- SCART
- HDMI 2
- HDMI 3
- USB
- HDMI 1
WEIGHT & DIMENSIONS
734.7 x 488.4 x 183
Product
Dimensions
With Stand
(W x H x D mm)
Without Stand
734.7 x 441.3 x 68.7
Net Weight
With Stand
Without Stand
8.2kg
6.6kg
POWER
Main power - Operation (Max.)
Standby
70W
< 0.5 W
Main Power
Ambient Temperature
220-240V~ 50Hz
5ºC ~ 35ºC
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|
