Industrial Communications Worldwide
Industrial Ringdown/Autodialer Telephone
SCR Series
Installation & Operation
SCR 11
SCR 41
P005603 Rev. A 060612 5/28/2007 3:58 PM
7552 - 10th Street N.E. Calgary, Alberta, Canada T2E 8W1
Download from Www.Somanuals.com. All Manuals Search And Download.
Guardian Telecom Inc.
Installation and Operation
SCR Series
Overview
SCR Industrial Ringdown/Autodialer Telephone
The SCR is a rugged industrial telephone designed to provide safe, reliable, point to point
communication in harsh environments such as refineries, mills, plants, warehouses or areas with
high humidity.
The SCR Telephone may be supplied with an optional Auto Dialer or dialing may be programmed
through a PABX. If an Auto Dialer is ordered with the SCR refer to the manual for the Auto Dialer for
instructions on programming and for compliances.
Features
Enclosure
•
16 Gauge steel, zinc dichromate plated and powder coated
Epoxy Resin Coating
•
•
encapsulates all parts on main circuit board
resistant to corrosive agents (eg. H2S, SO2, and NH3), and high
humidity
Magnetic Reed Hook Switch
no moving parts
•
Surge Arrestor
•
Protects the user in the event of a high voltage spike on the telephone
line
Fuse
Prevents damage to the electronic circuits in the event of a high
voltage spike on the telephone line
•
Noise Reducing Microphone
•
allows a high level of intelligibility in locations with high background
noise.
Receiver Volume Control
Switch in handset provides 13.5dB of range
•
Heavy Duty Handset Cord (SCR 11)
withstands abusive use
•
Armored Handset Cord (SCR 41)
vandal resistant
•
Hearing-Aid Compatibility
•
compatible with inductively coupled hearing-aid devices
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Guardian Telecom Inc.
Installation and Operation
SCR Series
MAGNETIC REED HOOK SWITCH
MAGNETIC REED HOOK SWITCH
16 GA STEEL - ZINC DICHROMATE
PLATED AND POWDER COATED
16 GA STEEL - ZINC DICHROMATE
PLATED AND POWDER COATED
ID & APPROVALS
ID & APPROVALS
HIGH IMPACT ABS HANDSET
HEARING AID COMPATIBLE EARPIECE
HIGH IMPACT ABS HANDSET
HEARING AID COMPATIBLE EARPIECE
WIRING ACCESS
WIRING ACCESS
HEAVY DUTY HANDSET CORD
ARMORED HANDSET CORD
SCR 11
SCR 41
Figure 1 - Features
5.1" [130mm]
2.2 [56]
2.7" [69mm]
5.0" [127mm]
Figure 2 - Overall Dimensions
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Guardian Telecom Inc.
Installation and Operation
SCR Series
GASKET
FUSE
FACEPLATE
TIP
RING
GROUND
HARNESS
SURGE ARRESTOR
GROUND
TERMINAL STRIP
BEL-Ringer
BR-3-39
2799 #45
MADE IN USA BY
FLOYD BELL INC.
COLUMBUS, OH
Figure 3 - Installation SCR-11
FACEPLATE
HARNESS
TIP
RING
GROUND
B
FUSE
SURGE ARRESTOR
GASKET
GROUND
TERMINAL STRIP
B
BEL-Ringer
BR-3-39
2799 #45
MADE IN USA BY
FLOYD BELL INC.
COLUMBUS, OH
~
Figure 4 - Installation SCR-41
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Guardian Telecom Inc.
Installation and Operation
SCR Series
Installing the SCR
•
•
•
Follow all appropriate electrical codes and use only approved electrical
fittings for the installation.
See: Figure 2 - Overall
Dimensions.
Choose a wall location that is free of obstructions and permits space for
cable or conduit runs.
Ensure mounting can support 4 lbs. (1.8 kg) and any additional foreseeable
load.
•
•
Ensure that none of the electrical connection circuits are live.
Remove the eight (8) cover screws from the front of the unit and carefully
remove the front cover assembly. NOTE that the handset and all
electronics are attached to the front plate. The front cover may be
separated from the back box by disconnecting the harness plugs.
•
•
Use the template provided to locate and drill holes for #8 or M4 mounting
screws.
Tip: Use #8 or M4
screws to secure the unit
to the wall.
Attach the back box to the wall. If weather resistance is important in your
application select washers that will assist in sealing the mounting holes.
Wiring the SCR to the Telephone System
•
Fit an appropriate cable gland, grommet or conduit connector to the 7/8”
opening in the bottom of the enclosure.
See: Figure 3 -
Installation SCR-11 &
Figure 4 - Installation
SCR-41
•
Bring cable into the enclosure through the opening and attach individual
wires from the exchange (Tip/Ring/Ground) to the connector (Tip & Ring are
not polarity sensitive). If a conduit hub is used, ensure that it is grounded to
the ground stud.
•
•
Ensure all connections are tight, then replace and secure the cover.
Connect the telephone into the system.
•
The SCR Telephone may be supplied with an optional Auto Dialer or dialing
may be configured by the PABX. If an Auto Dialer is ordered with the SCR,
refer to the manual for the Auto Dialer for instructions on programming and
for compliances.
•
Test the unit by calling to and from another unit on the exchange.
Operating the SCR
•
The SCR Ringdown/Autodialer phone is designed for automatic calling
simply by removing the handset from the cradle.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guardian Telecom Inc.
Installation and Operation
SCR Series
Field Repairs
Field repairs may only be carried out by qualified technicians using OEM parts.
Substitution of parts voids warranty and may pose a hazard to users of the
equipment.
See: Replacement Parts
•
•
Disconnect the telephone from Tip and Ring power supplied by the PABX
or central office before attempting to make repairs.
See: Figure 3 -
Installation SCR-11 &
Figure 4 - Installation
SCR-41
Carefully remove the front cover assembly and separate from the housing
by disconnecting the harness plugs. NOTE that the electronics are
attached to the front plate.
•
•
Perform the necessary repairs or adjustments.
Carefully replace the front plate and install all eight screws. Do not over
tighten the cover screws, there is a flexible gasket between the cover and
the body. Excessive tightening of the screws deforms the gasket and
reduces the weather resistance of the set.
Fuse Replacement
See: Figure 3 -
Installation SCR-11 &
Figure 4 - Installation
SCR-41
•
Remove the old fuse by pushing in the end cap of the fuse holder and
turning counterclockwise to open. Insert a new 0.25 amp, 250Volt, 3AG
fast blow fuse and close the fuse holder.
WARNING!
•
Replace only with a 0.25 amp 250V 3AG fast blow fuse. Failure to do so
will void the warranty.
•
If, on reconnecting power, the fuse fails, check the telephone system
wiring. The fuse protects the Tip and Ring line from the telephone system.
It is usually powered at 48 volts DC and must not be connected to 120 volts
AC.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guardian Telecom Inc.
Installation and Operation
SCR Series
Engineering Specifications
ELECTRICAL PERFORMANCE
AUDIBLE RANGE FREQUENCY RESPONSE
TRANSMIT OBJECTIVE LOUDNESS RATING (TOLR)
RECEIVER VOLUME ADJUSTMENT
RECEIVE OBJECTIVE LOUDNESS RATING (ROLR)
-AT NOMINAL VOLUME LEVEL
-AT MAXIMUM VOLUME LEVEL
-AT MINIMUM VOLUME LEVEL
SIDE TONE OBJECTIVE LOUDNESS RATING (SOLR)
-AT NOMINAL VOLUME LEVEL
-AT MAXIMUM VOLUME LEVEL
-AT MINIMUM VOLUME LEVEL
RINGER OUTPUT
300 – 3400 HZ
-38 +/- 3 dB
+8.1 / -5.1 dB IN STEPS OF 2.7 dB
50 +/- 3 dB
41.9 +/- 3 dB
55.4 +/- 3 dB
11 +/- 4 dB
7 +/- 4 dB
14 +/- 4 dB
>75 dB
FCC RINGER EQUIVALENCE
0.8B
SET IMPEDANCE
600 OHMS NOMINAL
MAXIMUM LOOP
15,000 FEET (4,600 METERS) OF 22 AWG
COPPER
ELECTRICAL REQUIREMENTS
RINGER SENSITIVITY
LINE VOLTAGE
40 – 100 V, 16 – 25 HZ
24 – 56 VDC
LOOP CURRENT
20 - 120 mA
CONNECTION METHOD
ENVIRONMENTAL
SURGE ARRESTOR / TERMINAL BLOCK
WEATHERPROOF
ENCLOSURE NEMA 3R
TEMPERATURE
-40O TO +60O C (-40O TO +140O F)
MECHANICAL
HOOK SWITCH (CRADLE SWITCH) LIFE
BODY CONSTRUCTION
>1 000 000 OPERATIONS
16 GAUGE STEEL, ZINC DICHROMATE
PLATED AND POWDER COATED
DIMENSIONS (H x W x D)
NET WEIGHT
9 X 5.0 X 5.2 INCHES (229 X 127 X 132 MM)
4 LBS (1.82 KG)
HANDSET MATERIAL
MICROPHONE
HIGH IMPACT ABS
NOISE REDUCING ELECTRET
NOISE CANCELING DYNAMIC
HEARING AID COMPATIBLE
OPTIONAL MICROPHONE
RECEIVER
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Guardian Telecom Inc.
Installation and Operation
SCR Series
STANDARD MOUNTING
CONNECTION FITTINGS
HARDWARE MATERIAL
COMPLIANCES
VERTICAL WALL
7/8” DIAM. OPENING FOR OWNER SUPPLIED FITTING
STAINLESS STEEL
INDUSTRY CANADA
1012 6721 A
FCC
HQHCAN-22517-TE-E
Accessories
•
•
•
•
•
P7224 Potted ring detect relay
P7225 Weather Proof ring detect relay
P7227 Potted off-hook detect relay
P7232 Weather Proof off-hook detect relay
PXXXX External Loud Ringer
Replacement Parts
Description
Part No.
P004026
P006263
P005479
P005477
P002786
P004371
P000028
P004538
P002080
P005391
P005699
P005582
P002782
P005917
P002992
P002991
P002840
P004152
P002787
Faceplate SCR-11
Faceplate SCR-41
Handset Shell C/W Volume Control & 22” Armored Cord
Handset Shell C/W Volume Control & 6’ Curly Cord
Handset Cradle
Handset Retainer – SCR-41 Only
Microphone Cartridge – Noise Reducing
Microphone Cartridge – Noise Canceling
Receiver Cartridge
Handset Assembly – C/W Volume Control & 6’ Curly Cord For SCR-11
Handset Assembly – C/W Volume Control & 22” Armored Cord For SCR-41
Telephone Circuit Board
Ringer – Floyd Bell BR-3-39
Reed Switch
Surge Arrestor – TII 126L1
Fuse – Glass 0.25 Amp 250V
Housing SCR-11
Housing SCR-41
Gasket – Faceplate
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Guardian Telecom Inc.
Installation and Operation
SCR Series
Warranty
Guardian Telecom warrants your product to be free of defects in material and workmanship for a period
of one year. Guardian Telecom will repair or replace any defective unit that is under warranty
This warranty is null and void if any non-authorized modifications have been made to this product, or if
it has been subjected to misuse, neglect, or accident. This warranty covers bench repairs only; such
repairs must be made at Guardian Telecom or an authorized service depot. Guardian Telecom is not
responsible for costs incurred for on-site service calls, freight, or brokerage.
A return authorization must be obtained prior to warranty claims or repairs.
Disclaimer
The products covered by this manual are designed for use in Industrial Environments and/or Hazardous
Locations. Due to the range of possible applications for these instruments the manufacturer will not be
responsible for damages or losses of any kind suffered as a result of the use of this product, including
consequential damages.
Warning
This device may be opened and reassembled by qualified personnel only, for the purposes of installing
the product, making adjustments and replacing components, following the instructions in the product
manual.
High voltages may be present in this product when connected to telephone wiring.
Service Telephone Number
1-800-363-8010
Guardian Telecom provides a customer service telephone number which is toll-free within North
America. If you need assistance when installing or operating this product, please call the toll-free
telephone number between regular business hours (8:00AM-5:00PM), Mountain Standard Time. If you
are calling outside of regular business hours, please leave a detailed message, and a member of
Guardian Telecom’s Service Department will return your call as soon as possible. If your product
requires service, Guardian personnel will supply you with an RMA (return materials authorization)
number over the telephone or through our web site product return page. This number must be included
with your return address and the name of the person to contact.
Guardian Telecom Inc.
7552 - 10th Street N.E.
Calgary, Alberta, Canada T2E 8W1
Toll-free 1-800-363-8010
Ph. (403) 258-3100
Fax. (403) 253-4967
Feedback
Guardian Telecom continually strives to make reliable, durable, and easy to use products. If you, as an
installer or user of our equipment, have any suggestions for improvements to this or any of our products
or documents, including this manual, we would appreciate hearing from you.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Guardian Telecom Inc.
Installation and Operation
SCR Series
Guardian Product Return
Guardian products have been quality tested and are in full working order when shipped from
the factory, given the rugged nature of these products shipping is not expected to damage a
unit. In the unlikely event of a malfunction, Guardian follows the three step procedure below.
Step I - On-Site Correction
•
•
•
The most common source of difficulties with a new product is improper installation in one of
two ways: incorrect wiring connections or connection to an incorrect power source.
Product wiring needs to be properly connected to the on-site wiring. Correct wiring
instructions are shown in the user manual included with the product.
Connecting a telephone to a standard power source, rather than tip & ring, will blow the
telephone’s internal, user-replaceable fuse. In the event of fuse burn-out, disconnect the
telephone from the power source, replace the fuse, and reconnect following the wiring
diagrams provided with the product.
Step II - Return Materials Authorization (RMA)
•
When a product has been installed following user manual instructions, and the unit fails to
operate, the user must contact Guardian Telecom to obtain authorization to return the
product. This can be done by completing a RMA form online at
manual.
•
•
•
After providing information on the product, the owner and the nature of the problem,
Guardian will issue a RMA number, to be shown on documentation returned with the
product.
In addition to the RMA number, shipping documents should include name, address and
telephone number of the owner along with contact information for the person responsible
for the repair and/or the user who identified the malfunction.
(Where a product is being returned for repair from outside of Canada, customs
documentation must show the product’s serial number, date of export [date of purchase],
and a notation that the equipment is: “Canadian goods returning.”)
Step III - Factory Authorized Service
•
Once received, each product is carefully inspected and tested. If the product is under
warranty, repairs are completed and the product returned to the owner, generally within
five working days of receipt by the factory.
•
A product that has been subjected to misuse, neglect or accident or is beyond the warranty
period will be evaluated. The service department will provide the owner’s representative
with a repair cost estimate. Once approved, repairs are completed and the product
returned, generally within five working days.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Guardian Telecom Inc.
7552 - 10th Street N.E.
Calgary, Alberta, Canada T2E 8W1
Toll-free 1-800-363-8010
Ph. (403) 258-3100
Fax. (403) 253-4967
E-mail: mailto:[email protected]
(Click to open message box)
Industrial Communications Worldwide
© Guardian Telecom Inc. 2005
Download from Www.Somanuals.com. All Manuals Search And Download.
|