Grundig Home Theater System DR 3400 DD User Manual
HOME CINEMA  
SYSTEM  
Cinemo  
DR 3400 DD  
DEUTSCH  
ENGLISH  
FRANÇAIS  
ITALIANO  
PORTUGUÊS  
ESPAÑOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
____________________________________________  
29-30  
Disc features  
29  
Disc formats  
29  
DVD features  
29-30  
30  
VCD/S-VCD features  
MP3/WMA CD features  
Audio CD features  
30  
30  
JPEG/Kodak picture CD features  
31-38  
Disc mode  
31  
Playback functions  
31  
32  
32-33  
33  
Selecting titles or chapters  
Selecting titles or chapters (in DVD mode)  
PBC playback (in Video CD mode)  
Picture settings  
33-34  
34-36  
36-37  
37  
Displaying information  
Additional playback functions  
Zero setting (GO TO)  
Repeat functions  
38  
Creating a track memory – playing back titles or tracks in selected order  
39-41  
39-40  
41  
Other modes  
Tuner mode  
Sleep timer mode  
42-44  
42-43  
43  
43  
44  
Information  
Technical data  
General instructions for laser devices  
Cleaning discs  
Rectifying minor problems  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CINEMO DR 3400 DD  
________________________  
Special features of your home cinema system  
Your DVD receiver provides you with perfect digital video playback  
in studio quality.  
It also provides superb cinema-quality audio playback – in stereo or  
with digital multi-channel sound – depending on the type of DVD or  
CD used.  
In addition to DVDs, you can also play S-Video CDs, MP3/WMA  
CDs and audio CDs. Additionally, the DVD receiver can read home-  
made DVD Rs and DVD RWs with video data and CD Rs and  
CD RWs with audio or image data (JPEG/Kodak pictures).  
Packing contents  
1
2
3
4
Cinemo DR 3400 DD DVD receiver  
Remote control  
1
2 Batteries, 1.5 V, type AA  
D
i
g
i
t
a
l
H
o
m
e
C
i
n
e
m
a
S
y
s
t
e
m
C
i
n
e
m
o
V
OLUME  
5
ON  
/
OFF  
FUNCTION  
2 front loudspeakers, 1 centre loudspeaker,  
2 surround loudspeakers  
D
S
P
MODE  
4
5
6
7
8
9
Passive subwoofer  
6 loudspeaker cables  
FM wire antenna  
6
7
9
DVD  
AUX  
AM  
8
FM  
1
4
7
2
5
8
0
3
FM  
MODE  
6
DISPL  
10  
2
3
9
A
-B  
C
L
M
RGB/  
SV  
PROG  
C
S
D
I
RDS  
/
INFO/NEWS  
PTY  
PTY  
TOP  
MENU  
P
T
Y
E
R
AM frame antenna  
Euro/AV (Scart) cable  
DSP  
SPK  
LEVEL  
T
e
l
e
P
i
l
o
t
6
0
A
10 Operating manual  
Dolby Pro Logic II, Dolby Digital and DTS  
With its Dolby Pro Logic II decoder, the DVD receiver has the latest  
surround decoder technology. It generates surround sound from the  
stereo signal. However, the rear channel consists of two separate  
stereo channels, whose frequency range is not restricted. This  
means Pro Logic II produces a sound zone with a completely new  
sense of space, location and stability.  
1 DOLBY  
S
U
R
R
O
U
N
D
P
R
O
L
O
G
I
C
I
I
Dolby Digital, on the other hand, is a digital sound system designed  
for completely independent multi-channel audio playback. It carries  
five full audio channels and a low frequency effects (LFE) channel. In  
general, Dolby Digital signals can also consist of fewer than 5 chan-  
nels (for example 2.0 or 3.0).  
DTS Digital Surround is a digital sound system for differentiated 5.1  
multi-channel audio reproduction which creates three-dimensional  
surround sound effects.  
S U R R O U N D  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SET-UP AND SAFETY___________________________  
Please note the following information when setting up the home cinema sys-  
tem:  
°C  
°C  
2h  
The DVD receiver and loudspeakers are designed for playing back video  
and audio signals at home. Any other use is expressly prohibited.  
D
i
g
i
t
a
l
H
o
m
e
C
i
n
e
m
a
S
y
s
t
e
m
C
i
n
e
m
o
V
OLUME  
ON  
/
OFF  
FUNCTION  
D
S
P
M
O
D
E
V
OLUME  
FUNCTION  
If you want to set up the DVD receiver on wall shelves or in cupboards,  
please ensure that the device is adequately ventilated. There must be at least  
10 cm of space at the side, above and behind the device.  
Please note when setting up the DVD receiver that furniture surfaces are  
coated with various types of paint and plastic, which often contain chemical  
additives. These additives may cause corrosion to the feet of the unit. This  
may leave stains on the surface of the furniture which can be difficult or  
impossible to remove.  
an  
alk  
B
im  
g
D
i
g
i
t
a
l
H
o
m
e
C
i
n
e
m
a
S
y
s
t
e
m
C
i
n
e
m
o
V
OLUME  
ON  
/
OFF  
FUNCTION  
D
S
P
MODE  
If the DVD and loudspeakers are subjected to sudden changes in tempera-  
ture, for example if they are brought in from the cold to a warm room, let  
them stand for at least two hours without inserting a disc. Do not connect  
them to the mains supply during this time.  
D
i
g
i
t
a
l
H
o
m
e
C
i
n
e
m
a
S
y
s
t
e
m
C
i
n
e
m
o
V
O
L
U
M
E
The DVD receiver and loudspeakers are designed for use in dry rooms. You  
must make sure that they are protected from moisture such as rain or water  
splashes.  
ON  
/
OFF  
FUNCTION  
D
S
P
M
O
D
E
Place the DVD receiver on a hard, level surface. Do not place any objects  
such as newspapers on the DVD receiver, or any cloth or similar articles  
underneath it.  
The laser lens is sensitive to temperature. Therefore, do not place the DVD  
receiver near heating units or in direct sunlight, as this will impair cooling.  
D
i
g
i
t
a
l
H
o
m
e
C
i
n
e
m
a
S
y
s
t
e
m
C
i
n
e
m
o
V
OLUME  
ON  
/
OFF  
FUNCTION  
D
S
P
M
ODE  
Do not insert foreign objects in the disc compartment of the DVD receiver.  
Never open the casing of the DVD receiver and loudspeakers. No warranty  
claims are accepted for damage resulting from improper handling.  
Do not place any vessels such as vases containing fluid on the DVD receiver  
and loudspeakers. These may be knocked over and spill fluid on the electri-  
cal components, thus presenting a safety risk. Do not place any objects such  
as burning candles on the DVD receiver or loudspeakers.  
SPEAKER  
SW  
C
RS  
LS  
R
L
IN  
OUT  
IN  
OUT  
~AC IN  
OPTICAL  
VIDEO  
S-VIDEO  
SCART  
L
FM 75  
Ω
R
AM  
LOOP  
RESET  
4-8  
Ω
8-16  
IMPEDANCE  
Ω
IN  
OUT  
AUDIO  
Thunderstorms are a danger to all electrical devices. Even if the DVD re-  
ceiver is switched off, it can be damaged by a lightning strike to the mains.  
Always disconnect the mains and antenna plugs of the DVD receiver during  
a storm.  
If the DVD receiver cannot scan DVDs or CDs perfectly, use a commercially  
available cleaning CD. Other cleaning methods may damage the laser  
optics. Always keep the disc compartment closed to prevent dust from col-  
lecting on the laser optics.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW____________________________________________  
The front of the DVD receiver  
i
g
i
t
a
l
o
m
e
i
n
e
m
a
y
s
t
e
m
D
H
C
S
i
n
e
m
o
C
VOLUME  
ON  
/
OFF  
FUNCTION  
DSP MODE  
S
U
R
R
O
U
N
D
ON/OFF  
Switches the device to standby mode and back on again,  
using the last signal source selected.  
The device is only fully disconnected from the mains after  
the plug has been pulled out.  
Standby indicator. Lights up when the DVD receiver is in  
standby mode.  
•
ə
Opens and closes the disc compartment.  
Starts and pauses disc playback.  
Ends disc playback.  
II  
ı
7
In disc mode – press briefly during playback to select the  
previous section or title. Hold down during playback to  
start a reverse search.  
5a  
Q
In tuner mode – selects the previous preset station (stored  
radio station).  
In disc mode – press briefly during playback to select the  
next section or title. Hold down during playback to start a  
reverse search.  
W
s6  
In tuner mode – selects the next preset station (stored  
radio station).  
DSP MODE  
Depending on the type of disc, selects the sound effects  
LIVE HOUSE, HALL, CONCERT, STADIUM and THEATRE or  
DSP OFF.  
y
Headphone jack for connecting a stereo headphone set  
with a jack plug (ø 3.5 mm).  
The loudspeakers are switched off automatically. The  
sound is reproduced in stereo two-channel sound with no  
surround sound effects.  
VOLUME  
Control dial for volume control.  
FUNCTION  
Switches between DVD, TUNER FM/AM AV IN, SCART IN  
and DIGITAL IN functions.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW____________________________________________  
The displays of the DVD receiver  
8
II TITLE TRK TUNED CHP PROG RDS REPEAT 1 A-B  
/
s
ij
ij
ProLogic II  
DIGITAL  
KHz  
MHz  
CD  
STEREO VCD MP3 00 00000  
: :  
00 0:00:00 Displays various function conditions and settings, as well  
as the name or frequency of the radio station.  
KHz  
In combination with the frequency display for AM (medium  
wave) reception.  
MHz  
In combination with the frequency display for FM recep-  
tion.  
L C R  
LS S RS  
Indicates whether the source signal consists of two or more  
channels.  
/
A DVD is inserted.  
ijDIGITAL  
Dolby Digital indicator.  
ijPro Logic II Dolby Pro Logic II indicator.  
CD  
An audio CD inserted.  
DTS indicator.  
STEREO  
VCD  
In tuner mode – two-channel stereo reception.  
A VCD or S-VCD is inserted.  
An MP3 CD is inserted.  
MP3  
II  
The disc has been paused during playback.  
Disc playback.  
s
TITLE  
TRK  
Displays the title number.  
Displays the track number.  
TUNED  
CHP  
A radio station is optimally tuned.  
Displays the chapter number.  
In disc mode – lights up when playing a track memory.  
In tuner mode – an RDS station is being received.  
The repeat function is activated.  
A selected section is repeated.  
The sleep timer is activated.  
PROG  
RDS  
REPEAT 1  
A-B  
8
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW____________________________________________  
The back of the DVD receiver  
SPEAKER  
SW  
C
RS  
LS  
R
L
IN  
OUT  
IN OUT  
VIDEO  
~AC IN  
S-VIDEO  
OPTICAL  
SCART  
L
FM 75 Ω  
R
AM  
LOOP  
RESET  
4-8 Ω  
8-16 Ω  
IMPEDANCE  
IN  
OUT  
AUDIO  
~AC IN  
Power cord.  
SPEAKER  
SW C RS LS R L  
Terminals for connecting the supplied  
loudspeaker cables for the subwoofer, centre  
speaker, right surround speaker, left surround  
speaker, right front speaker and left front speaker.  
OPTICAL IN  
Digital (optical) audio signal input for connecting an  
external device.  
OPTICAL OUT  
Digital (optical) audio signal output for connecting  
an external device.  
VIDEO IN  
Video signal input for connecting an external device.  
VIDEO OUT  
Alternative video signal output for connecting the  
television using a conventional cinch cable.  
S-VIDEO  
Alternative video signal output for connecting the  
television using a conventional Y/C cable.  
SCART  
Euro AV (Scart) socket for connecting the television  
using the Euro-AV cable supplied.  
AUDIO IN L R  
AUDIO OUT L R  
Audio signal inputs for connecting an analogue  
playback device.  
Audio signal outputs for connecting an analogue  
recording device.  
FM 75Ω  
Connection socket for the FM antenna.  
AM LOOP  
Connection socket for the AM frame antenna  
supplied.  
RESET  
Resets the DVD receiver in case the operating  
electronics are blocked.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW____________________________________________  
The remote control  
9
Switches the DVD receiver to standby mode and from  
standby mode using the last signal source selected.  
AUX  
DVD  
AM  
FM  
ə
Opens and closes the disc compartment.  
Selects the DISC input source.  
2
5
8
0
FM  
1
4
3
6
MODE  
DVD  
AUX  
DISPL  
Selects the AV IN, SCART IN and DIGITAL IN (Aux)  
input sources.  
7
9
A
-B  
CL  
M
RGB/  
SV  
PROG  
AM FM  
1 ... 0  
Selects the TUNER input source and switches between  
FM and AM wavebands.  
CD  
S/I  
RDS  
INFO/NEWS  
Numerical buttons for various inputs.  
In disc mode – select titles or chapters.  
In tuner mode – to directly entering the preset number  
or frequency.  
PTY  
PTY  
TOP  
MENU  
PTY SEARCH  
ɧ
Selects the “GO TO” function (for selecting the starting  
point for playback, or a particular title, chapter or  
track).  
DSP  
SPK  
LEVEL  
FM MODE  
Switches between stereo and mono reception in FM  
tuner mode.  
b
In DVD mode – for repeating a chapter or the entire  
DVD.  
Tele Pilot 60 A  
In CD mode – for repeating a title, a file (MP3), all  
titles or all files (MP3).  
DISPL  
A-B  
Switches the screen display in disc mode between various  
information on chapters, titles and playing time.  
In disc mode – marks a section, which is then  
constantly repeated.  
O
Press once to activate the brightness setting for the  
display. Press twice to activate the sleep timer setting.  
PROG  
CL  
Opens the menu for creating a track memory.  
Deletes a track memory.  
M
Activates the memory function for storing radio  
stations in preset positions.  
Starts and pauses the automatic station search (ASP).  
RGB/SV  
Selects the video output format (RGB or S-Video).  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW____________________________________________  
n
y
d
Selects various camera angles for certain scenes  
or passages on the DVD during playback.  
For selecting and displaying subtitles on the DVD  
during playback.  
AUX  
DVD  
AM  
FM  
Switches between the original and dubbed  
language during DVD playback  
2
5
8
0
FM  
1
4
3
6
MODE  
DISPL  
v
Enlarges scenes during playback (zoom).  
7
9
A
-B  
CL  
M
RGB/  
SV  
PROG  
CD S/I  
In CD mode – for playing back tracks or files in  
random order (S = shuffle); for playing the intro-  
ductions of tracks or files (I = intro).  
CD  
S/I  
RDS  
INFO/NEWS  
– z +  
Adjusts the volume of the home cinema system.  
In tuner mode – calls up RDS information.  
RDS  
PTY  
PTY  
TOP  
i
Opens the set-up menu in disc mode when the  
disc is not playing, regulates the brightness and  
focus during playback.  
MENU  
PTY SEARCH  
x
.
For quitting screen menus.  
DSP  
SPK  
LEVEL  
Opens the DVD title menu during playback;  
switches playback control (PBC) of VCDs and  
S-VCDs off and on.  
In MP3 mode: switches between playback of a  
file, an album and the entire disc.  
Tele Pilot 60 A  
TOP MENU  
OK  
Opens the disc menu.  
Activates the selected setting and confirms  
entries.  
A INFO/NEWS Moves the cursor up in the set-up or disc menu  
(on the TV screen).  
S PTY SEARCH Moves the cursor down in the set-up or disc  
menu (on the TV screen).  
In tuner mode – activates the PTY search func-  
tion.  
PTY – a  
s PTY +  
Moves the cursor left in the set-up or disc menu  
(on the TV screen).  
In tuner mode – selects programme types.  
Moves the cursor right in the set-up or disc menu  
(on the TV screen).  
In tuner mode – selects programme types.  
s
I
Switches to slow motion search at various speeds  
during DVD playback.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW____________________________________________  
II  
Press once to pause playback (freeze frame). Press  
repeatedly to move forward frame by frame.  
7
Press once to interrupt disc playback (resume), press  
twice to end playback (stop).  
AUX  
DVD  
AM  
FM  
Starts playback.  
ı
5
2
5
8
0
FM  
1
4
3
6
MODE  
DISPL  
6
During disc playback, selects the previous or next title  
or section.  
In tuner mode – for selecting the previous or next  
preset radio station.  
7
9
A
-B  
CL  
M
RGB/  
SV  
PROG  
m
,
In tuner mode – switches the frequency up or down in  
50 kHz increments. Starts the forward or reverse  
frequency search.  
CD  
S/I  
RDS  
INFO/NEWS  
In disc mode – starts the fast forward and reverse  
search.  
PTY  
PTY  
TOP  
MENU  
DSP  
Selects the sound effects LIVE HOUSE, HALL, CONCERT,  
STADIUM and THEATRE or DSP OFF (not for MP3).  
PTY SEARCH  
K
Selects the sound effects Pro-Logic II Music and Pro-  
Logic II Movie or Pro-Logic II Off (2-channel stereo)  
(not for MP3).  
DSP  
SPK  
LEVEL  
SPK LEVEL  
For setting the output level of the loudspeakers.  
d
Switches the home cinema system to and from mute  
mode.  
Tele Pilot 60 A  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION AND PREPARATION_________  
Connection diagram for the loudspeakers  
Surround  
left  
Surround  
right  
Subwoofer  
Centre  
INPUT  
SPEAKER  
SW  
C
RS  
LS  
R
L
IN  
OUT  
IN OUT  
VIDEO  
~AC IN  
S-VIDEO  
OPTICAL  
SCART  
L
Front left  
Front right  
FM 75  
Ω
R
AM  
LOOP  
RESET  
4-8  
Ω
8-16  
IMPEDANCE  
Ω
IN  
OUT  
AUDIO  
Setting up the loudspeakers  
If possible, set up the front loudspeakers in line with the TV set,  
angled slightly towards the listener. The listener and the speakers  
should form an equilateral triangle. This creates the best stereo  
effect.  
Surround L  
Surround R  
The surround loudspeakers should be angled slightly towards each  
other at a sufficient distance to the left and right behind the listener.  
They should be positioned at ear height, even when wall-mounted.  
Subwoofer  
Front L  
Set up the central loudspeaker at the midpoint between the two front  
speakers, for example above or below the TV set. The best height  
for the centre loudspeaker is at head height of the seated listener.  
Front R  
Centre  
To achieve the best possible bass sound, we recommend that you set  
up the subwoofer to the left or right of the front loudspeakers, in  
such a way that the sound crosses the room diagonally.  
When you are in the middle of the room, you may not be able to  
hear the bass tone of the subwoofer sufficiently. This is caused by  
what are known as standing waves, which occur between parallel  
walls. In this case, simply position the subwoofer at an angle to the  
wall.  
Avoid placing the loudspeakers in a corner, because this over-  
amplifies the bass tones.  
Objects in front of the loudspeakers significantly impair the treble  
tones and the stereo effect.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION AND PREPARATION_________  
Connecting the loudspeakers  
Note:  
To connect the loudspeakers, switch off the DVD receiver and dis-  
connect the mains.  
Loudspeakersy  
x
When you connect the loudspeaker cables, do not let frayed ends  
protrude, as this can cause short circuits.  
Front left  
Front right  
Surround left  
Surround right Black  
Centre  
Black  
Black  
Black  
White  
Red  
Green  
Brown  
Yellow  
Blue  
Note:  
Connect the coloured loudspeaker cable to the coloured terminals,  
and the black cable to the black terminals.  
Black  
Black  
Subwoofer  
Connecting the front loudspeakers  
SW  
C
RS  
LS  
R
L
~AC IN  
1
Connect the cables for the right and left front loudspeakers to  
the »SPEAKER R« and »SPEAKER L« terminals on the DVD  
receiver and the appropriate terminals on the loudspeakers.  
4-8 Ω  
8-16 Ω  
IMPEDANCE  
Connecting the surround loudspeakers  
SW  
C
RS  
LS  
R
L
1
Connect the cables for the right and left surround loudspeakers  
to the »SPEAKER RS« and »SPEAKER LS« terminals on the  
DVD receiver and the appropriate terminals on the loudspeak-  
ers.  
~AC IN  
4-8 Ω  
8-16 Ω  
IMPEDANCE  
Connecting the central loudspeaker  
SW  
C
RS  
LS  
R
L
~AC IN  
1
Connect the cables for the central loudspeaker to the terminals  
on the DVD receiver and the appropriate terminals on the loud-  
speaker.  
4-8 Ω  
8-16 Ω  
IMPEDANCE  
Connecting the subwoofer  
SW  
C
RS  
LS  
R
L
~AC IN  
1
Connect the cables for the subwoofer to the »SPEAKER SW«  
terminals on the DVD receiver and the appropriate terminals on  
the subwoofer.  
4-8 Ω  
8-16 Ω  
IMPEDANCE  
Connecting a television, flat screen or projector  
You have three options, depending on the sockets you have on your  
television or projector:  
– Connecting to the Euro-AV (Scart) socket using the Euro-AV cable  
supplied is the best option, because the video, audio and format  
switching signals are all on the same connection.  
– If your television has no Euro-AV socket, you can still achieve a  
good picture quality by connecting it via the S-VIDEO OUT sockets.  
– Alternatively, you can connect it using cinch cables to the VIDEO  
OUT sockets for standard picture quality.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION AND PREPARATION_________  
Connection using a EURO-AV (Scart) cable  
1
Plug the EURO-AV cable supplied into the »SCART« socket of  
the DVD receiver and into the corresponding socket on the tele-  
vision, flat screen or projector.  
OUT  
CAL  
IN  
OUT  
S-
VIDEO  
L
FM 75 Ω  
R
AM  
LOOP  
IN  
AUDIO  
OUT  
RESET  
Connection using a Y/C (S-Video) cable  
1
Plug a standard Y/C cable into the »S-VIDEO« socket on the  
DVD receiver and the corresponding socket (S-VIDEO IN) on  
the television, flat screen or projector.  
OUT  
AL  
IN  
OUT  
IDEO  
VIDEO  
SCART  
L
FM 75 Ω  
R
AM  
LOOP  
IN  
AUDIO  
OUT  
RESET  
Connecting using a video cinch cable  
1
Plug a standard video cinch cable into the »VIDEO OUT«  
socket on the DVD receiver and the corresponding socket  
(VIDEO IN) on the television, flat screen or projector.  
OUT  
AL  
IN  
OUT  
S-VIDEO  
VIDEO  
SCART  
L
FM 75 Ω  
R
AM  
LOOP  
IN  
OUT  
RESET  
AUDIO  
Connecting digital external devices  
You can connect external devices, such as a digital recorder, for  
disc mode. An optical output »OPTICAL OUT« is available for this  
purpose. The digital output must be activated and set in the set-up  
menu (see page 21).  
You can connect digital audio sources using the optical input  
»OPTICAL IN«.  
1
Connect the input socket of the external device to the corres-  
ponding output socket on the DVD receiver.  
I
T  
IN  
OUT  
S-VIDEO  
L  
VIDEO  
L
FM 75 Ω  
R
2
Connect the output socket of the external device to the corre-  
sponding input socket on the DVD receiver.  
AM  
LOO  
IN  
OUT  
RESET  
AUDIO  
Connecting analogue external devices  
1
Use cinch cables to connect the audio input sockets of the  
external device to the »AUDIO OUT L R« sockets on the DVD  
receiver.  
OUT  
CAL  
IN  
OUT  
S-VIDEO  
VIDEO  
SCART  
L
FM 75 Ω  
RESET  
R
AM  
LOOP  
IN  
AUDIO  
OUT  
2
Use a cinch cable to connect the video input socket of the  
external device to the »VIDEO OUT« socket on the DVD  
receiver;  
OUT  
ICAL  
IN  
OUT  
VIDEO  
S-VIDEO  
SCART  
and/or  
L
FM 75 Ω  
R
AM  
LOOP  
1
2
Use cinch cables to connect the audio output sockets of the  
external device to the »AUDIO IN L R« sockets on the DVD  
receiver.  
IN  
T  
RESET  
AUDIO  
Use a cinch cable to connect the video output socket of the  
external device to the »VIDEO IN« socket on the DVD receiver.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION AND PREPARATION_________  
Connecting the antennas  
1
Plug the cable of the rooftop antenna into the FM antenna  
socket »FM 75Ω«.  
S-VIDEO  
SCART  
R
TV  
Note:  
FM 75 Ω  
AM  
If no rooftop antenna is available, use the auxiliary antenna  
supplied. This antenna provides reasonably good reception of  
local FM (VHF) stations. Do not shorten the auxiliary antenna.  
LOOP  
RESET  
2
For medium wave reception, plug the cable of the supplied MW  
frame antenna into the »AM LOOP« socket.  
S-VIDEO  
SCART  
AM  
FM 75 Ω  
RESET  
Note:  
M
A
P
LOOP  
A N  
N E T N A  
O O  
L
In order to prevent interference, place the MW frame antenna  
as far as possible from the home cinema system or other  
sources of interference.  
Connecting the power cord  
1
Plug the power cord (»~AC IN«) into the wall socket.  
SPEAKER  
SW  
C
RS  
LS  
R
Note:  
~AC IN  
If the DVD receiver does not react when the buttons are  
pressed, this may be caused by electrostatic discharge in the  
area. In this case pull out the mains plug and insert it into the  
socket again after a few seconds.  
4-8 Ω  
8-16 Ω  
IMPEDANCE  
Inserting batteries in the remote control  
1
2
3
Open the battery compartment by pressing the marked area  
and pulling down the cover.  
When inserting the batteries (2 x 1.5 V, LR 06/UM 3/AA),  
observe the polarity marked on the battery compartment.  
Close the battery compartment.  
Note:  
If the DVD receiver no longer reacts properly to remote control  
commands, the batteries may be flat. Be sure to remove used  
batteries. The manufacturer accepts no liability for damage  
resulting from leaking batteries.  
Environmental note:  
Batteries, including those which contain no heavy metal, may  
not be disposed of with household waste. Please dispose of  
used batteries in an environmentally sound manner. Find out  
about the legal regulations which apply in your area.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION AND PREPARATION_________  
Additional information for units sold in the UK.  
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains  
supply.  
The range of multi-system receivers is built to work in most European coun-  
tries. However, the mains plug and socket system for the UK differs from  
many European countries.  
This appliance has been supplied with a fitted, non-removable, approved  
converter plug for use in the UK. This converter plug is fitted with a 5A rated  
fuse.  
In case this appliance is supplied with a moulded 2-pin Euro plug only,  
which is unsuitable for UK operation, this must be cut off and immediately  
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a  
qualified electrician.  
Note:  
The severed Euro plug must be destroyed to avoid a possible shock  
hazard should it be inserted into a socket elsewhere.  
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is  
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any  
other type of plug is used it must be protected by a 5A fuse either in the  
plug, or at the distribution board. If this type of plug becomes defective,  
ensure that the fuse is removed before disposal, to eliminate potential shock  
hazard.  
If it is necessary to change the fuse in the non-rewireable plug, the correct  
type and rating (5A ASTA or BSI approved BS1362) must be used and the  
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and  
plug must not be used until a replacement is obtained. Replacement fuse  
covers should be obtained from your dealer.  
Important:  
The wires in the mains lead are colour coded in accordance with the follo-  
wing code:  
BLUE – NEUTRAL  
BROWN – LIVE  
As the colours of the wires in the mains lead of your appliance may not cor-  
respond with the coloured marking identifying terminals in your plug, pro-  
ceed as follows:  
Connect the BLUE coloured wire to plug terminal marked with the letter “N”  
or coloured black.  
Connect the BROWN coloured wire to the plug terminal marked with the let-  
ter “L” or coloured red.  
In no circumstance must any of the wires be connected to the terminal mar-  
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-  
low.  
Replacement mains lead sets can be obtained from your local dealer, or by  
contacting Grundig Consumer Relations (01788 570088)  
Moulded 3-pin lead set, suitable for UK use:  
Ref: Leadset UK  
8290-991-224  
Moulded 2-pin Euro lead set, not suitable for UK use:  
Ref: Leadset Euro  
8290-991-316  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
______________________________________________  
General information  
You can make the settings required for operating the system in the  
set-up menu which appears on the television screen. To do this,  
switch on the television and switch it to the channel on which the  
DVD is set. You can only make settings with the remote control in  
disc mode when the device is stopped.  
Switching on  
1
Press »DVD« to switch on the DVD receiver from standby  
mode.  
Selecting the menu language  
The set-up menu is available in English, German, French and Spa-  
nish. The default setting is English.  
1
2
Press »i« to open the set-up menu.  
Language  
Video  
Audio  
Rating  
Select the »Language« menu item with » « or » « and press  
»OK« to confirm.  
a
s
OSD Menu  
Subtitle  
English  
English  
English  
English  
English  
Deutsch  
Français  
Español  
3
4
5
Select »OSD Menu« with » « or » « and press »OK« to  
A
S
Audio  
confirm.  
DVD Menu  
Select your language using » « or » « and press »OK« to  
A
S
confirm.  
Press »i« to quit the set-up menu.  
Navigating in the set-up menu  
Move through the set-up menu with » « or » « and select the  
main menu item. The selected menu item is shown on a light blue  
background.  
a
s
Language  
Video  
Audio  
Rating  
TV Shape  
4:3 Pan Scan  
PAL  
TV System  
When you press »OK« to confirm your selection, a sub-menu with  
two columns appears. Here too, you can navigate with » « and  
A
»
« and select the item you require in the right column. The select-  
S
ed line is shown on a light blue background.  
When you press »OK« to confirm your selection, a third column  
Language  
Video  
Audio  
Rating  
usually appears, where you can make the setting by pressing »  
«
A
or » «. The selected setting is shown on a light blue background.  
When you press »OK« to confirm the setting, the third column dis-  
S
TV Shape  
4:3 Pan Scan  
PAL  
4:3 Letter Box  
4:3 Pan Scan  
16:9 Wide  
TV System  
appears. You can now quit the set-up menu by pressing »i« or press  
» « to return to the main menu and make other settings.  
A
Some sub-menus have no third column. In this case, you make the  
setting in the second column by repeatedly pressing »OK«. You can  
then quit the set-up menu by pressing »i« or press » « to return to  
A
the main menu and make other settings.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
______________________________________________  
Setting the video functions  
Setting the picture format  
1
2
3
Select the »Video« menu item with » « or » « and press  
»OK« to confirm.  
a
s
Language  
Video  
Audio  
Rating  
Select »TV Shape« by pressing » « or » « and press »OK«  
A
S
to confirm.  
TV Shape  
4:3 Pan Scan  
PAL  
4:3 Letter Box  
4:3 Pan Scan  
16:9 Wide  
TV System  
In the third column, press » « or » « to make the setting  
A
S
and press »OK« to confirm:  
– »4:3 Letter Box« for a normal 4:3 television.  
– »4:3 Pan Scan« for a normal 4:3 television. Wide-screen pic-  
tures are cropped to the left and right. »Pan Scan« is the  
default setting.  
– »16:9 Wide« for a 16:9 wide-screen television.  
Setting the colour norm for the television  
1
2
3
Select the »Video« menu item with » « or » « and press  
»OK« to confirm.  
a
s
Language  
Video  
Audio  
Rating  
Select »TV System« by pressing » « or » « and press  
A
S
»OK« to confirm.  
TV Shape  
4:3 Pan Scan  
PAL  
TV System  
NTSC  
PAL  
In the third column, press » « or » « to make the setting  
A
S
and press »OK« to confirm:  
Auto  
– »NTSC«: PAL video signals are converted to NTSC signals.  
– »PAL«: NTSC video signals are converted to PAL signals.  
»PAL« is the default setting.  
– »Auto«: PAL or NTSC video signal output is selected automat-  
ically in the multi-system.  
Selecting the video format for the Euro-AV (Scart)  
output  
1
In the Stop position, press »RGB/SV« to switch between two  
video formats:  
– »RGB« or »RGB« on the device: the video output of the Euro-  
AV socket provides RGB video signals. The S-Video socket is  
switched off. This is the default setting.  
– »S-Video« or »S-VIDEO« on the device: the video output of  
the Euro-AV and S-Video socket provides S-Video signals.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
______________________________________________  
Setting the loudspeaker configuration  
Switching on  
1
Switch on the DVD receiver from standby by pressing »9« on  
the remote control or »ON/OFF« on the device.  
Setting the distance to the listening position  
Ideally, all the speakers in a home cinema system, should be set up  
at equal distances from the listener. The central speaker should also  
be positioned in line with the front speakers. If these preconditions  
are met, you do not need to set a time delay for the sound, because  
the default setting is »0ms«.  
However, central and front loudspeakers are often set up closer to  
the listener. In this case, the sound must be electronically delayed by  
a fraction of a second. This is done using the sound time delay func-  
tion.  
If the central speaker is no more than 50 cm from the line between  
the front speakers, the setting is not necessary. If the distance is  
greater, you must find out the difference between the distances from  
the listener to the front speakers and from the listener to the central  
speaker. Enter the travel time of the sound in milliseconds (ms)  
(»0ms« to »5ms«). One metre roughly corresponds to 3 milli-  
seconds.  
When using surround speakers, you must also find out the differ-  
ence between the distances from the listener to the front speakers  
and from the listener to the surround speakers. Enter the travel time  
of the sound from »0ms«, »3ms« to »12ms«, »15ms«. One metre  
roughly corresponds to 3 milliseconds.  
1
2
3
4
5
Select the »Audio« menu item with » « or » « and press  
»OK« to confirm.  
a
s
Language  
AC3  
DTS  
MP3/WMA  
Others  
Pink Noise  
DRC  
CNTR CTRL  
REAR CTRL  
Video  
Audio  
Rating  
Select »CNTR CTRL« with » « or » « and press »OK« to  
A
S
PCM  
PCM  
PCM  
PCM  
Off  
Off  
0ms  
0ms  
confirm.  
5ms  
4ms  
3ms  
2ms  
1ms  
0ms  
In the third column, press » « or » « to make the setting  
A
S
and press »OK« to confirm.  
Select »REAR CTRL« with » « or » « and press »OK« to  
A
S
confirm.  
In the third column, press » « or » « to make the setting  
A
S
and press »OK« to confirm.  
Checking the volume with a test tone  
A test tone can be created for each connected speaker to check the  
volume level. »Off« is the default value.  
1
Select the »Sound« menu item with » « or » « and press  
»OK« to confirm.  
a
s
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
______________________________________________  
Language  
AC3  
DTS  
MP3/WMA  
Others  
Pink Noise  
DRC  
CNTR CTRL  
REAR CTRL  
Video  
Audio  
Rating  
2
Select »Pink noise« with » « or » « and press »OK« to con-  
firm.  
A
S
PCM  
PCM  
PCM  
PCM  
Off  
Off  
0ms  
0ms  
3
In the third column, select »On« with » « or » « and press  
A
S
»OK« to confirm.  
Off  
On  
– The test tone sounds in turn from the left front speaker, the  
central speaker, the right speaker, the surround speakers and  
the subwoofer (see the loudspeaker indicator on the DVD  
receiver).  
4
5
Use »– z +« to adjust the volume of the test tone to a clear-  
ly audible level.  
– If you want to adjust the volume level of all the loudspeakers,  
please read the section entitled “Setting the volume level on  
all channels”.  
To stop the test tone, press » « or » « to select »Off« in the  
A
S
third column and press »OK« to confirm.  
Setting the volume level on all channels  
Depending on the current operating mode (see the loudspeaker  
indicator on the DVD receiver), you can adjust the loudspeaker  
volumes according to your preference. You can make this setting  
either with or without the test tone. The volume impression should be  
about the same for all channels. The individual volumes can be  
adjusted within a range of -5 to +5 dB.  
When entering the settings, if no button is pushed for more than  
5 seconds, the DVD receiver quits the menu automatically. However,  
altered settings are saved.  
1
2
3
4
Press »SPK LEVEL« to open the menu for setting the level.  
– Display: »SOUND«.  
SOUND  
Press » « to open the first setting.  
A
– Display: e.g. »L-CH 0«.  
L-CH 0  
L-CH +4  
Set the volume of the front speaker using » « or » «.  
a
s
– Display: e.g. »L-CH +4«.  
To set the central speaker (»C-CH 0«), the right front speaker  
(»R-CH 0«), the surround speakers (»SL-CH 0« and »SR-CH  
0«) or the subwoofer (»SW-CH 0«), repeat steps 2 and 3.  
– The DVD receiver quits the menu automatically after five  
seconds. All settings are retained.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
______________________________________________  
Setting the audio functions  
Setting digital audio signal output  
You can make the setting for the optical output for connection to an  
external device here.  
Language  
AC3  
DTS  
MP3/WMA  
Others  
Pink Noise  
DRC  
CNTR CTRL  
REAR CTRL  
Video  
Audio  
Rating  
1
2
3
Select the »Audio« menu item with » « or » « and press  
»OK« to confirm.  
a
s
PCM  
PCM  
PCM  
PCM  
Off  
Off  
0ms  
0ms  
Select the output format (»AC3«, »DTS«, »MP3/WMA« or  
»Others«) using » « or » «.  
A
S
Press »OK« repeatedly to make the setting.  
– »PCM«: The digital output converts into PCM audio format for  
digital recorders. »PCM« is the default value.  
– »Original«: The digital output provides the original audio  
format.  
– »Off«: The digital output does not process any signals.  
Setting the dynamic range  
Dolby Digital and DTS soundtracks have a very large dynamic  
volume range, hence there is a great difference between quiet and  
loud sounds. When played at full volume this can be a fascinating  
experience, but it can cause disturbance late at night. Simply re-  
ducing the volume does not produce satisfactory results, since the  
dialogue can be hard to understand.  
You can turn down the louder sounds and turn up the quieter pas-  
sages, while retaining the volume of the dialogue. This function is  
called the dynamic range.  
Language  
Video  
Audio  
Rating  
1
Select the »Audio« menu item with » « or » « and press  
»OK« to confirm.  
a
s
AC3  
DTS  
MP3/WMA  
Others  
Pink Noise  
DRC  
PCM  
PCM  
PCM  
PCM  
Off  
Off  
0ms  
0ms  
2
3
Select »DRC« with » « or » « and press »OK« to confirm.  
a
s
Make the setting with » « or » « and press »OK« to con-  
A
S
Off  
On  
firm:  
CNTR CTRL  
REAR CTRL  
– »Off« or »On«. »Off« (the default setting) means uncom-  
pressed dynamics (during the day), »On« means compressed  
dynamics (late at night).  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
______________________________________________  
Language settings  
The default for all language settings is »English«.  
Setting the preferred subtitle language  
1
2
3
Select the »Language« menu item with » « or » « and press  
»OK« to confirm.  
a
s
Language  
Video  
Audio  
Rating  
English  
English  
English  
English  
OSD Menu  
Subtitle  
Select »Subtitle« with » « or » « and press »OK« to con-  
A
S
English  
Audio  
Deutsch  
Français  
Español  
Auto  
firm.  
DVD Menu  
In the third column, press » « or » « to select the language  
A
S
or the »Auto« or »Off« setting, and press »OK« to confirm.  
Off  
Setting the preferred dubbing language  
1
Select the »Language« menu item with » « or » « and press  
»OK« to confirm.  
Language  
Video  
Audio  
Rating  
a
s
OSD Menu  
Subtitle  
English  
English  
2
3
Select »Audio« with » « or » « and press »OK« to confirm.  
A
S
Audio  
Deutsch  
English  
English  
Deutsch  
Français  
Español  
DVD Menu  
In the third column, press » « or » « to select the language  
A
S
and press »OK« to confirm.  
Setting the preferred disc menu language  
1
2
3
Select the »Language« menu item with » « or » « and press  
»OK« to confirm.  
a
s
Language  
Video  
Audio  
Rating  
OSD Menu  
Subtitle  
English  
English  
Deutsch  
English  
Select »DVD Menu« with » « or » « and press »OK« to  
A
S
Audio  
confirm.  
DVD Menu  
English  
Deutsch  
Français  
Español  
In the third column, press » « or » « to select the language  
A
S
and press »OK« to confirm.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
______________________________________________  
Setting the parental lock  
Age restrictions for viewing can be set on some DVDs. The parental  
lock allows you to define age limits on several levels in the setup  
menu. »Off« is the default setting. If the DVD is not suitable for an  
age group you have defined, then the DVD receiver will not play the  
DVD. You can enable and disable the parental lock using a per-  
sonal code.  
Language  
Video  
Audio  
Rating  
1
Select the »Rating« menu item with » « or » « and press  
a
s
»OK« to confirm.  
– »Password« is shown on a blue background.  
Password  
Rating  
F
* * * *  
3.  
Load Factory  
Reset  
2
Enter your four-digit personal code number with »1 ... 0« and  
press »OK« to confirm.  
– The lock symbol opens.  
3
4
Select »Rating« by pressing » «.  
S
Language  
Video  
Audio  
Rating  
Press »OK« repeatedly to change the setting.  
The following settings are available:  
– Off.: Parental lock off.  
Password  
Rating  
– – – –  
7.  
F
– 1.: Suitable for all ages.  
Load Factory  
Reset  
– 2.: Only with parental guidance.  
– 3.: Not suitable for children under 13, from ages 13 to 18  
only under parental guidance.  
– 4.: May contain violence or sex scenes, can only be viewed  
by children under 18 under with parental guidance.  
– 5.: Level 5  
– 6.: Only for adults, not for those under 17.  
– 7.: Only for adults.  
Language  
Video  
Audio  
Rating  
Password  
Rating  
– – – –  
7.  
D
5
6
Press » « to return to the »Password« item.  
A
Load Factpry  
Reset  
Enter your four-digit personal code number with »1 ... 0« and  
press »OK« to confirm.  
– The lock symbol closes.  
Note:  
If you have forgotten or lost your personal code number, use the  
master code listed in the troubleshooting section on page 44.  
Once you have disabled the parental lock using the master  
code, you can then enter any personal code you choose.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
______________________________________________  
Tuning and storing radio stations ...  
You can store up to 30 FM radio stations and 30 AM radio stations.  
You can see the displays for this in the DVD receiver.  
... using the automatic station search (ASP)  
1
2
3
Switch on the DVD receiver from standby by pressing »9« on  
the remote control or »ON/OFF« on the device.  
– The DVD receiver switches on with the last input source selected.  
Press »AM FM« on the remote control or »FUNCTION« on  
the DVD receiver to select the TUNER input source.  
– Display on the DVD receiver: e.g. »FM 87.50MHz«.  
FM 87.50MHz  
To start the automatic station search, press »M« on the remote  
control until »AUTO SAVE« appears in the display.  
– The automatic station search begins. The receiver searches for  
up to 30 stations with the strongest signals in the FM range  
and another 30 in the AM range.  
FM03 92.50 MHz  
– After the search has finished, you will hear the station stored  
at position 1.  
Note:  
You can stop the search by pressing »M« on the remote control  
(display: »SAVE STOP«).  
... manually  
1
Press »AM FM« on the remote control or »FUNCTION« on  
the DVD receiver to select the waveband (FM or AM).  
2
To start the search, press »m« or »,« until the frequency in  
the search changes.  
– The search stops when a radio station is found.  
– Display: e.g. »FM 100.60MHz«.  
FM 100.60MHz  
Note:  
To change the frequency in steps, briefly press »m« or »,«  
several times.  
– Display: the frequency in 50 kHz increments  
or  
Enter the frequency directly with »1 ... 0« and press »OK« to  
confirm.  
– Display: e.g. »FM  
8«, then e.g.  
FM  
8
- - - -  
- - - -  
»FM  
88.60«.  
-
– The radio station is then played.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
______________________________________________  
3
4
5
Press »M« on the remote control to select the memory function.  
– Display: »SAVE TO  
«, » « for the preset position.  
-- --  
SAVE TO  
--  
Note:  
If no button is pressed within 5 seconds, the DVD receiver auto-  
matically quits the memory function.  
Select the preset position by pressing »5« or »6« on the  
remote control.  
SAVE TO 03  
Note:  
You can enter the preset position directly using the numerical  
keys »1 ... 0« on the remote control.  
Store the radio station by pressing »OK« on the remote control  
within five seconds.  
– Display: briefly »SAVED«, then for example  
»FM03100.60MHz«.  
FM03 100.60MHz  
Restoring all default settings  
Language  
Video  
Audio  
Rating  
You can return all settings to their default values with this function.  
1
In the set-up menu, select »Rating« by pressing » « or »  
and then press »OK« to confirm.  
«
s
a
Password  
Rating  
– – – –  
7.  
D
Load Factory  
Reset  
2
Select »Load Factory« with » « or » « and then press  
A
S
»OK« to confirm.  
– All the default settings are restored.  
Resetting the DVD receiver  
In the unlikely event of the electronic controls of the DVD receiver  
becoming blocked (for example due to static electricity from the car-  
pet or because of electrical storms), you can reset the device to its  
original state.  
1
Use a pointed object such as a paper clip to press »RESET« (on  
the back of the device) for two seconds  
or  
pull out the mains plugs and plug it back in after two minutes.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL FUNCTIONS________________________  
Switching on and off  
1
Switch on the home cinema system from standby by pressing  
»9« on the remote control or »ON/OFF« on the device.  
– DVD receiver display: briefly »WELCOME«.  
– The system switches on with the most recently selected input  
source.  
WELCOME  
2
Switch the home cinema system to standby by pressing »9«  
on the remote control or »ON/OFF« on the device.  
– Display: briefly »GOOD-BYE«, the display on the DVD receiv-  
er goes out.  
GOOD-BYE  
Selecting the input source  
1
Select the input source (DVD, TUNER FM/AM, AUX) by press-  
ing »FUNCTION« on the DVD receiver or »DVD«, »AM  
FM« or »AUX« on the remote control.  
– Display on the DVD receiver: »DVD«, »TUNER FM«/»TUNER  
AM«, »AV IN«, »SCART IN« or »DIGITAL IN«.  
DVD  
Preparing for disc playback  
1
2
3
Switch on the television and select the preset channel for the  
DVD receiver.  
Switch on the DVD receiver from standby by pressing »9« on  
the remote control or »ON/OFF« on the device.  
Select the DISC input source.  
– Display on the DVD receiver: briefly »DVD«, followed by  
»LOADING« and then »NO DISC«.  
NO DISC  
Inserting a disc  
1
Press »ə«.  
– The disc compartment opens.  
– Display on the DVD receiver: »OPEN«.  
OPEN  
2
3
Insert the disc in the disc compartment with its label facing  
upwards.  
Press »ə«.  
– The disc compartment closes again (display: »CLOSE«).  
The disc is scanned.  
CLOSE  
– Display on the DVD receiver: information on the disc.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL FUNCTIONS________________________  
Removing discs  
1
Press »ə« to open the disc compartment.  
2
Remove the disc.  
Adjusting the volume  
1
Alter the volume of the whole system by pressing »VOLUME«  
on the DVD receiver or »– z +« on the remote control.  
– Display on the DVD receiver: briefly »VOLUME« and the  
selected level (scale from »MIN«, »01« to »62«, »MAX«).  
VOLUME 23  
Note:  
In Aux mode, the volume of the television set should be set to a  
minimum, as the sound is transmitted through the DVD receiver.  
Muting  
The DVD receiver mutes the connected loudspeakers using this func-  
tion.  
1
Press »d« on the remote control to mute.  
– Display on the DVD receiver: the loudspeaker indicator flashes.  
O
2
Briefly press »d« on the remote control again to cancel the  
muting.  
– Display on the DVD receiver: the loudspeaker indicator  
remains on.  
Selecting sound effects  
You can choose between five different sound effects (LIVE HOUSE,  
HALL, CONCERT, STADIUM, THEATRE and DSP OFF).  
1
2
Press »DSP« to call up the current sound effect.  
– Display on the DVD receiver: »LIVE HOUSE«, »HALL«,  
»CONCERT«, »STADIUM«, »THEATRE« or »DSP OFF«.  
THEATRE  
Keep pressing »DSP« on the remote control to select the sound  
effect you want.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL FUNCTIONS________________________  
Switching between two-channel and  
multi-channel mode  
The DVD receiver has a Dolby Pro Logic II Decoder, which changes  
the stereo signal into a Dolby surround signal during disc playback,  
thus providing a high quality surround sound effect.  
Pro Logic II has two playback modes, namely music and movie. In  
music mode, there is a shelf filter, which acts gently on high fre-  
quencies on the surround channels. It provides a natural, convincing  
sound effect, because surround sound information is normally sub-  
ject to slight treble attenuation due to reflection and absorption.  
Movie mode, on the other hand, does not use a surround filter, but  
stereo surround outputs instead.  
The loudspeaker configuration (two-channel or multi-channel)  
appears in the loudspeaker display on the DVD receiver.  
1
To switch between two-channel and multi-channel mode, press  
»K« on the remote control repeatedly.  
PLII MOVIE  
– Display during switching: briefly »PLII OFF«, »PLII  
MUSIC« or »PL II MOVIE«.  
»
– Dijisplay on the DVD receiver in Dolby Pro Logic II mode:  
ProLogic II«.  
ijProLogic II  
Adjusting the brightness of the DVD receiver  
display  
You can change the brightness of the display in three levels.  
1
To activate the function, press »O« on the remote control.  
– Display: »DIMMER MAX«, »DIMMER MID« or »DIMMER  
MIN«.  
DIMMER MAX  
2
To set the brightness level, press » « or » « repeatedly and  
a
s
press »OK« to confirm.  
– Display: briefly »OK«.  
– The brightness is set.  
OK  
General information on disc playback  
If the symbol »-« appears on the television screen and  
»INVALID« appears on the DVD receiver display after certain key  
commands, the disc manufacturer has restricted the functions, or the  
function is not available in the current operating mode.  
INVALID  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC FEATURES  
____________________________________  
Disc formats  
Your DVD receiver can play DVD R/DVD RW in DVD video format and  
CD R and CD RW in CD-DA Format or MP3/WMA format.  
Due to difference in quality of the recording media and the quality of the  
recording itself, it can occasionally happen that a home-made DVD R/DVD  
RW or CD R and CD RW with audio data cannot be read. This does not  
indicate a malfunction of the DVD receiver. The causes for this can be faulty  
software or hardware settings, or even the CD itself. Should such problems  
arise, contact the customer services of your CD burner or software manufac-  
turer or search for information about this, for example online.  
If you make a DVD R/DVD RW or CD R/CD RW, please observe the legal  
regulations and do not infringe the copyright of third parties. Recordings  
you make yourself (DVD R/DVD RW, CD R and CD RW) have to be  
finalised.  
When MP3/WMA CDs are played back, individual tracks may be skipped  
or incorrectly played back. This can be due to the disc configuration, the  
encoder software or the hardware used for the recording.  
Audio CDs (CD-DA) meet the specification and bear the corresponding  
logo. Copy-protected CDs do not meet this specification in some circum-  
stances and do not bear the corresponding logo. These CDs can cause play-  
back errors.  
DVD features  
You can recognise a DVD by the logo on the label. Depending on the con-  
tent of the DVD, the discs contain one or more titles. Each title may contain  
one or more chapters. Titles and chapters can be selected easily and conve-  
niently.  
You can control and direct playback of a DVD using the menu of the DVD  
receiver on the television screen.  
Many DVDs have audio tracks recorded in up to eight languages. This  
enables you to select the language you prefer. Also, many DVDs are record-  
ed by the manufacturer with subtitles in several languages. You can select  
subtitles from up to 32 different languages.  
Your DVD receiver has been given region code 2. DVDs with other regional  
codes cannot be played.  
VCD/S-VCD features  
You can tell VCDs/S-VCDs (video CDs) by the logo on the label. Depending  
on the contents of the VCD/S-VCD (films, music videos etc.), the discs may  
carry one or more titles. Like audio CDs, VCDs/S-VCD have a track struc-  
ture.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC FEATURES  
____________________________________  
You can control and direct playback of the VCD/S-VCD using the menu of  
the DVD receiver on the television screen.  
S-VCDs can contain different dubbed languages and subtitles.  
PBC (playback control)  
VCDs/S-VCDs can be created using the PBC (playback control) system for  
track navigation. PBC switches between the playlist structure (the menu on  
the VCD/S-VCD) and manual selection by the user.  
PBC is activated after the VCD/S-VCD has been scanned. This function  
allows interactive playback of the VCD/S-VCD if you follow the menu on the  
television screen.  
MP3/WMA CD features  
MP3 stands for MPEG-1 Audio Layer 3, WMA for Windows Media Audio.  
Both formats enable audio files to be saved on a computer with a sound  
quality similar to that of a CD. The standard encoding bit rate for MP3 files  
is 128 kbps. The fundamental rule applies: the higher the bit rate of a file,  
the better the sound quality.  
Most MP3 files on the Internet are encoded at 128 or 160 kbps. 160 kbps is  
considered CD quality. MP3/WMA files can be downloaded from the Inter-  
net and then burned onto a CD ROM disc using suitable PC software.  
In MP3/WMA mode, the terms “album” and “file” are very important.  
“Album” corresponds to a folder on a PC, “File” to a file on a PC or a CD-  
DA track (title).  
Audio CD features  
An audio CD (CD-DA) is identified by this logo. Audio CDs contain only  
sound recordings. They can be played in the normal manner on an audio  
system. The individual tracks are stored in a sequence. There are no folders.  
As well as audio CDs, the DVD receiver can also read CD R and CD RW  
with audio data.  
JPEG/Kodak picture CD features  
JPEG stands for Joint Picture Experts Group. This process was designed to  
compress picture files.  
The files on a JPEG CD can be organised in directories. This structure is sim-  
ilar to that of an MP3 CD. JPEG CDs only contain data in the compressed  
JPEG format. This is mostly data from digital cameras or from imaging pro-  
grams. The data (images) can be displayed individually or in sequence in a  
slide show.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC MODE___________________________________________  
Playback functions  
In DVD mode, playback starts automatically after the disc has been  
scanned. A menu may also appear on the screen where you can  
start disc playback.  
A menu also appears on the screen with VCDs/S-VCDs where you  
can control the playback of the disc interactively if you activate the  
PBC function (see page 32).  
ı
II  
Playing back the disc  
1
2
3
4
Start playback in stop mode by pressing » «.  
ı
To pause playback (freeze-frame in video mode), press »II«.  
ı
Press » « to resume playback.  
ı
7
To end playback, press » «.  
7
Pausing and resuming playback  
7
7
ı
1
2
3
To pause playback, press » « once.  
Press » « to resume playback.  
ı
ı
7
To end playback, press » « twice.  
Selecting titles or chapters ...  
... step-by-step  
1
Select the next chapter, file or title by pressing » « briefly  
during playback.  
6
9
8
2
Press » « to switch to the start of the current chapter, file or  
5
title.  
– Playback begins at the start of the current chapter, file or title.  
3
Press » « again.  
– Playback starts with the previous chapter, file or title.  
5
... directly with the numerical keys  
1
During playback, select the title by pressing »1 … 0« on the  
remote control.  
– Playback starts with the selected chapter, file or title.  
Notes:  
These functions are not available in Aux mode.  
Direct selection using the numerical keys is not possible with  
every disc function.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC MODE____________________________________________  
Selecting titles or chapters (in DVD mode) ...  
... using the title or DVD menu  
If a DVD contains several titles or chapters, you can select these in  
the title or DVD menu, if the DVD itself offers this function.  
.
1
Press » « on the remote control to open the title or DVD  
menu.  
– The title or DVD menu appears on the screen.  
2
Select the title or chapter with » « or » « or with » « or  
A
S
a
» « and press »OK« to confirm.  
s
– Playback of the selected title or chapter begins.  
Note:  
Depending on the DVD, you can also select the title or chapter  
directly using the numerical keys »1 ... 0« on the remote con-  
trol. Press »OK« to confirm.  
... using the DVD main menu  
Some DVDs offer a main menu which shows the titles and chapters.  
1
Press »TOP MENU« on the remote control to open the main  
menu.  
– The main menu appears on the screen.  
2
Select the title or chapter with » « or » « or with » « or  
A
S
a
» « and press »OK« to confirm.  
s
– Playback of the selected title or chapter begins.  
Notes:  
Depending on the DVD, you can also select the title or chapter  
directly using the numerical keys »1 ... 0« on the remote con-  
trol. Press »OK« to confirm. On certain DVDs, if you press  
»TOP MENU«, the whole disc is repeated from the beginning.  
PBC playback (in Video CD mode)  
After the VCD or S-VCD is scanned, the PBC function is activated,  
provided the disc supports this function (»PBC ON« briefly  
appears).  
PBC ON  
1
Press » II« to start playback.  
– The DVD receiver automatically switches to PBC playback  
mode.  
ı
2
3
4
Select the menu option with » « or » « or with » « or  
A
S
a
»
« and press »OK« to confirm.  
s
Follow the instructions in the menu to use the interactive func-  
tions.  
Press »x« on the remote control to quit the menu or to return  
to the previous menu.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC MODE____________________________________________  
.
5
To deactivate the PBC function, press » « on the remote con-  
trol during playback.  
– »PBC OFF« appears briefly on the television screen.  
– Normal playback starts automatically.  
PBC OFF  
Note:  
.
In MP3 mode, » « switches between playback of a file, an  
album and the entire disc.  
Picture settings  
1
2
3
4
Press »i« during playback.  
Video Enhance  
Brightness  
Edges  
– Display: the »Video Enhance« menu.  
15  
11  
Select »Brightness« with » « or » « and adjust the picture  
A
S
brightness with » « or » «.  
a
s
Select »Edges« with » « or » « and adjust the picture  
A
S
sharpness with » « or » «.  
a
s
Press »i« to quit the menu.  
Displaying information ...  
... in DVD mode  
1
Press »DISPL« to see the Info line.  
– Display:  
00:00:05  
01:31:55  
Playing time  
Remaining playing time  
2
To call up further information press »DISPL« again.  
– Display:  
DVD  
Title 1/2  
Chapter 13/20  
Angle  
Audio b1/3  
1 ch English  
Type of disc  
Current and available titles  
Current and available chapters  
Camera positions (in the example 4)  
Current sound language is English  
1/4  
=
Subtitle  
Off  
Subtitles are off  
Bitrate 6400Mbps Bit rate  
3
Press »DISPL« to hide the Info line.  
... in video CD mode  
1
Press »DISPL« repeatedly on the remote control.  
– You will receive information concerning:  
– The elapsed playing time  
VCD1.1 00:01:26 00:50:51  
Track 1/1  
– The remaining playing time  
– The type of VCD/S-VCD  
– The current track on the VCD/S-VCD  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC MODE___________________________________________  
... in MP3 mode  
1
Press »DISPL« repeatedly on the remote control.  
– You will receive information concerning:  
– The elapsed playing time of the current file  
– The remaining playing time of the file  
... in audio CD mode  
1
Press »DISPL« repeatedly on the remote control.  
– You will receive information concerning:  
– The elapsed playing time of the current track  
– The remaining playing time of the track  
– The current track  
CDDA 00:02:42 00:00:34  
Track 5/19  
– The total number of tracks on the CD  
Additional playback functions  
During the fast search and slow motion functions, the sound is  
muted or the volume is reduced (CD-DA). Some of the functions are  
not available depending on the disc.  
Fast search  
1
During playback, press »m« or »,« on the remote control.  
– The fast search starts either forwards or backwards.  
$
$
x 2  
x 4  
Note:  
By repeatedly pressing »m« or »,« you can alter the for-  
ward or backward search speed during the search. The maxi-  
mum speed varies according to the medium.  
2
Press » « at the desired position.  
– Normal playback starts.  
ı
ı
Note:  
In video CD mode, the search stops at the end of a track. When  
the next track begins, normal playback starts automatically.  
Slow motion  
You can choose between three different forward playback speeds.  
The maximum speed varies according to the medium.  
1
2
During playback, press » s« on the remote control.  
I
Select the forward slow motion speed by repeatedly pressing  
» s«.  
I
s1/6  
I
3
Press » « to return to normal playback.  
ı
ı
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC MODE___________________________________________  
Selecting the camera angle for particular scenes  
or passages  
Many DVDs contain scenes or passages which were filmed by  
various cameras from different angles. You can choose from among  
these different angles.  
On DVDs which offer this function, the multi-angle symbol appears  
on the television screen, for example »n 1/4«.  
1
To select the camera angle function, press »n « during play-  
back.  
n 2/4  
– Display: camera angle »n 2/4«, in the example 2 of 4.  
2
To select another camera angle, press »n « repeatedly.  
Enlarging the picture (zoom)  
This function allows you to enlarge various picture sections. The  
zoom factors can be selected in the order v1 – v2 – vOff.  
1
During playback, pause or slow motion, press »v« on the  
remote control.  
1
v
– Display: »v1«, part of the picture is enlarged.  
2
3
Press » « or » «, or » « or » « to move the enlarged  
image around the screen.  
A
S
a
s
To quit the function, press »v« to switch to »vOff«.  
Off  
v
Switching the dubbed language or the audio  
format  
Use this setting to change from the preset dubbed language if the  
DVD offers alternatives.  
b2/3 =1 ch German  
b1/3 =1 ch English  
1
Press »d« during playback.  
– Display: the current dubbed language.  
2
Keep pressing »d« to select the dubbed language.  
Note:  
Switching the dubbed language can be suppressed by the  
structure of the DVD itself. In this case the setting is usually  
made in the DVD menu.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC MODE___________________________________________  
Selecting and displaying subtitles  
If the DVD provides subtitles, they can be displayed on your TV  
screen.  
When subtitles are available in several languages, you can select  
your preferred language.  
1
Press »y« during playback.  
– Display: for example, »o 1/21 English« is briefly dis-  
played, and the current subtitle is displayed.  
o1/21 English  
2
Keep pressing »y« to select the subtitle language.  
Notes:  
To switch off the subtitles, keep pressing »y« until »o Off«  
appears in the display. Switching the subtitles can be sup-  
pressed by the structure of the DVD itself. In this case the setting  
is usually made in the DVD menu.  
oOff  
Playing back tracks or files in random order (in  
CD mode)  
1
Press »CD S/I« to call up the function.  
– Display: »Normal«.  
Normal  
Shuffle  
2
Press »CD S/I« again.  
– Display: »Shuffle«.  
– The tracks or files are played back in random order.  
3
To quit the function, press »CD S/I« twice.  
– Display: briefly »Normal«.  
Normal  
Playing the introductions of tracks or files  
1
To call up this function, press »CD S/I« three times.  
– Display: »Intro«.  
Intro  
– The first ten seconds of each track or file are played. Playback  
begins with the first track or file.  
2
Press »CD S/I« twice to quit the function at the point you want.  
– Display: »Normal«  
Normal  
or  
7
Press » « to quit the function.  
Zero setting (GO TO)  
This function allows you to choose the playback position on the  
DVD, video CD or audio CD to the precise second.  
Search  
Time  
Title/chapter --- /---  
1
Press »a« on the remote control to call up the function.  
– The zero setting menu is displayed.  
--:--:--  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC MODE___________________________________________  
2
Select the title or chapter number display with » « or » « on  
the remote control.  
A
S
3
Using the numerical buttons »1 … 0« on the remote control,  
enter the title or chapter number and press »OK« to confirm.  
– Playback of the selected title or chapter begins.  
or  
2
3
Press » « or » « on the remote control to select the time dis-  
play.  
A
S
Enter the time with »1 … 0« and press »OK« to confirm.  
– Playback starts at exactly the position you entered.  
Repeat functions  
Repeating a selected section (A-B Repeat)  
You can mark a section within a chapter, file or title to be repeated.  
1
2
3
Briefly press »A-B« during playback to mark the start of the  
section.  
– Display: »Rep A-«.  
Rep A-  
Briefly press »A-B« again to mark the end of the section.  
– Display: »Rep A-B«, the scene marked is now constantly  
repeated.  
Rep A-B  
Press »A-B« again to quit the function.  
– Display: briefly »Rep Off«.  
Rep Off  
Repeating a chapter, file, title or all chapters,  
files, or titles on a disc  
1
2
3
During playback, press »b« on the remote control.  
– Display: briefly, e.g. »Repeat Chapter«; a chapter, file or title  
is repeated.  
Repeat Chapter  
Repeat Title  
Press »b« on the remote control again.  
– Display: briefly e.g. »Repeat Title«; all chapters, files or titles  
are repeated.  
Press »b« on the remote control a third time to quit the func-  
tion.  
– Display: briefly »Off«.  
Off  
Notes:  
These functions are not available in Aux mode.  
The PBC function must be switched off in video CD mode.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC MODE___________________________________________  
Creating a track memory – playing back titles  
or tracks in selected order  
You can store and then play back up to 12 titles or tracks in a par-  
ticular order from the disc. A track may be stored more than once.  
The DVD receiver must be in the stop position. When entering the  
settings, if no button is pushed for more than 5 seconds, the DVD  
receiver ends the process automatically. You then have to start  
again.  
1
Open the »Program Input« function by pressing »PROG« on  
the remote control.  
Program Input  
Title/Chapter  
– Depending on the type of disc in use the program menu  
appears, and a bookmark is displayed on item 1.  
_ _  
1 – – 4 – – – – 7 – – – – 10 – – – –  
2 – – – – 5 – – – – 8 – – – – 11 – – – –  
3 – – – – 6 – – – – 9 – – – – 12 – – – –  
2
3
Enter the number of the title, chapter or track with »1 … 0«  
and press »OK« to confirm.  
Select the next item using » «, » «, » « or » « and repeat  
a
s
A
S
Play Program  
Clear All  
the entry.  
Playing back a track memory  
Program Input  
Title/Chapter  
1
To play back the track memory, select »Play Program« with  
«, » «, » « or » « and press »OK« to confirm.  
»
a
s
A
S
– Playback of the track memory starts.  
1 3 – – – 4 10 – – 7 – – – – 10 – – – –  
2 8 – – – 5 14 – – 8 – – – – 11 – – – –  
3 6 – – – 6 – – – – 9 – – – – 12 – – – –  
7
2
End playback of the track memory by pressing » « (twice).  
Play Program  
Program Input  
Clear All  
Deleting a track memory  
1
Call up the »Program Input« menu in stop mode by pressing  
»PROG«.  
Title/Chapter  
2
Select »Clear All« with » «, » «, » « or » « and press  
»OK« to confirm  
a
s
A
S
1 3 – – – 4 10 – – 7 – – – – 10 – – – –  
2 8 – – – 5 14 – – 8 – – – – 11 – – – –  
3 6 – – – 6 – – – – 9 – – – – 12 – – – –  
or  
Press » « to open the disc compartment.  
– The track memory is deleted  
ə
Play Program  
Clear All  
or  
Switch the DVD receiver to standby by pressing »9« on the  
remote control or »ON/OFF« on the device.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER MODES_____________________________________  
Tuner mode  
Selecting the tuner input source  
1
Select the input source by pressing »AM FM« on the remote  
control or »FUNCTION« on the DVD receiver.  
– The most recently selected radio station is played (Last Station  
Memory).  
FM 100.60MHz  
– Display on the DVD receiver: frequency band and frequency,  
or station name.  
Selecting the waveband  
1
Select the wavebands FM (VHF) or AM (medium wave) by  
pressing »AM FM« on the remote control or »FUNCTION«  
on the DVD receiver.  
AM 1404KHz  
– Display on the DVD receiver: »FM« or »AM« and the frequen-  
cy or briefly »TUNER FM« or »TUNER AM«.  
Calling up stored radio stations  
1
Select the preset position by pressing »1 ... 0« and »OK« on  
the remote control.  
FM06100.06  
MHz  
– Display on the DVD receiver: briefly, e.g.  
»FM06 100. 60MHz«  
or  
Press »5« or »6« on the remote control to select preset posi-  
tion one at a time.  
– Display on the DVD receiver: briefly e.g. »STATION 08«,  
then the frequency or station name.  
STATION 08  
Switching between stereo and mono reception  
When the DVD receiver receives FM stereo stations, »STEREO«  
appears in the display. If the signal from the FM stereo station is  
weak, you can improve the sound quality by switching to mono  
reception.  
1
Press »FM MODE« on the remote control to switch to mono  
reception.  
STEREO  
STEREO  
– Display: briefly »MONO«, »STEREO« disappears.  
2
To switch back to FM stereo, press »FM MODE« on the remote  
control.  
– Display: briefly »STEREO«, »STEREO« remains on.  
RDS station service  
RDS (Radio Data System) is an additional information system pro-  
vided by most FM stations. When the DVD receiver is receiving an  
RDS station, »RDS« and the station name appear in the display.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER MODES_____________________________________  
Searching for RDS stations  
1
To search for an RDS station, press »m« or »,« repeatedly  
until »RDS« appears in the display indicating that an RDS  
station is being received.  
RDS  
ENERGY  
– After a short time the station name sometimes appears if the  
reception is sufficiently strong.  
Note:  
It may take some time before all the RDS information is avail-  
able.  
Calling up RDS information  
If an RDS station is being received, various station information can  
be called up in the display.  
1
Press »RDS« repeatedly.  
– The display shows the waveband with the preset position and  
frequency, station type, radio ticker text, the station name,  
and then the waveband again with the preset position and  
frequency.  
Searching for station types (PTY)  
1
Press »  
PTY SEARCH« to call up the PTY search function.  
S
– Display: »PTY SEARCH«.  
PTY SEARCH  
– If no station type code is transmitted, »NO PTY« appears in  
the display.  
2
3
Select other station types by pressing »a  
»s PTY +«.  
PTY –« or  
Press »OK« to start the PTY search.  
– If the station type cannot be found, the following ticker text  
message appears: »NOT FOUND«.  
NOT FOUND  
– If the station type is found, the frequency appears in the dis-  
play and the desired station type can be heard.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER MODES_____________________________________  
Sleep timer mode  
Setting the sleep timer  
The sleep timer switches the system off at the set time.  
1
To activate the function, keep pressing »O« on the remote  
control until »SLEEP OFF« appears in the display.  
SLEEP OFF  
2
To set the switch-off time (»10«, »20«, »30«, »60« to »150«)  
press » « or » « repeatedly and then press »OK« to confirm.  
– Display: briefly »OK«, then »8«.  
8
8
a
s
OK  
– The system switches off after the selected time.  
3
To see the remaining time until the device switches off, press  
»O« on the remote control until »SLEEP -19« (for exam-  
ple) appears in the display.  
SLEEP -19  
Deactivating the sleep timer  
1
To activate the function, keep pressing »O« on the remote  
control until the remaining time, e.g. »SLEEP -8«, appears in  
the display.  
2
Keep pressing » « or » « until »SLEEP OFF« appears in the  
a
s
display, then press »OK« to confirm.  
– Display: briefly, »SLEEP -19«, then »8« disappears.  
– The system stays on.  
SLEEP OFF  
or  
1
Press »ON/OFF« to switch the DVD receiver to standby mode.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION_____________________________________  
Technical data  
This device is noise-suppressed according to the applicable EU directives.  
This product fulfils the European directives 89/336/EEC, 73/23/EEC and  
93/68/EEC.  
This device conforms to the safety regulation DIN EN 60065 (VDE 0860)  
and therefore the international safety regulation IEC 60065.  
Never open up the DVD receiver. No warranty claims are accepted for  
damage resulting from improper handling.  
“Dolby”, “Pro Logic” and the double-D symbol “  
Manufactured with permission from Dolby Laborijatories.  
” are trademarks of Dolby Laboratories.  
“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.  
Technical and design modifications reserved.  
General information  
Disc unit  
Mains voltage:  
230 V~, 50 Hz  
Playback standard:  
PAL, 50 Hz, 625 lines  
NTSC, 60 Hz, 525 lines  
Rated power consumption:  
Operating: ≤ 140 W  
Picture format:  
Standby: ≤ 1 W (DVD receiver)  
4:3, 16:9  
Ambient temperature:  
Playback system:  
+10 °C to +35 °C  
DVD-video, video-CD 1.1 and 2.0, S-video-CD,  
MP3/WMA-CD, audio-CD (CD-DA)  
CD-R, CD-RW, DVD R, DVD RW  
Amplifier  
CD ROM (MP3), sampling frequency 44.1 kHz  
Output:  
Nominal:  
Radio  
5 x 25 W (5 x 8 Ω), 1 x 50 W passive  
Music:  
Sensitivity:  
5 x 50 W (5 x 4 Ω)  
Mono (S/N=26 dB), 4 µV  
Stereo (S/N=46 dB), 30 µV  
Input sensitivity/impedance  
(audio analogue):  
400 mV / 22 kOhm  
Non-linear distortion factor:  
Mono (1 kHz, 40 kHz dev.), 0.3 %  
Stereo (1 kHz, 40 kHz dev.), 0.6 %  
Frequency range:  
10 ... 24,000 Hz  
Frequency range:  
(
3 dB) 20 ... 14,000 Hz  
Non-linear distortion factor:  
-1 dB, 8 Ω, 1 kHz, ≤ 0.3 %  
Noise voltage ratio:  
22.5 kHz dev., DIN A, Mono, ≥ 60 dB  
40 kHz dev., DIN A, Stereo, ≥ 63 dB  
FM and AM frequency bands:  
FM 87.5 ... 108 MHz  
AM 522 ... 1629 kHz  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION_____________________________________  
Dimensions and weight  
Loudspeakers  
DVD receiver  
W x H x L: 360 x 80 x 380 mm  
6.4 kg  
Music/rated load:  
Nominal:  
5 x 25 W (4 Ω), 1 x 50 W (Subwoofer)  
Front loudspeakers  
W x H x L: 90 x 130 x 120 mm  
0.6 kg  
Frequency range:  
Front and surround loudspeakers:  
150 ... 20,000 Hz  
Subwoofer:  
Centre loudspeaker  
W x H x L: 90 x 130 x 120 mm  
0.6 kg  
40 ... 150 Hz  
System:  
5 x broadband (front and centre magnetically  
shielded)  
subwoofer: Bass reflex system  
Surround loudspeakers  
W x H x L: 90 x 130 x 120 mm  
0.47 kg  
Subwoofer  
W x H x L: 165 x 330 x 335 mm  
4 kg  
General instructions for laser devices  
Your system is a CLASS 1 LASER PRODUCT. This means that the laser is  
designed in such a way as to ensure that the maximum permissible emission  
value cannot be exceeded under any circumstances.  
CLASS 1  
LASER PRODUCT  
Caution:  
If operating devices or methods other than those specified here are  
employed, it may lead to dangerous exposure to emissions.  
This device emits laser radiation. Because of the danger of eye injuries, the  
unit may only be opened or serviced by trained personnel.  
If settings other than those specified here are employed or other procedures  
are carried out, this may lead to dangerous radiation exposure.  
Cleaning discs  
Wipe the dirty disc with a cloth from the centre outwards in a straight line.  
Do not use any solvents such as benzene, thinners, conventional cleaner or  
anti-static spray for vinyl records.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION_____________________________________  
Rectifying minor problems  
Not every picture or sound problem is caused by a defect in your DVD receiver. Defects can also be  
caused by leads having been accidentally pulled out, damaged discs and worn out batteries in the  
remote control. If the following measures do not rectify the problem, consult your authorised dealer.  
Due to the difference in quality of the recording media and the quality of the recording itself, it can  
occasionally happen that a home-made disc cannot be read. This does not indicate a malfunction of  
the DVD receiver.  
Fault  
Possible cause/remedy  
The DVD receiver will not switch on.  
No electrical supply:  
Check the connection to the mains cable.  
The DVD receiver does not respond to Obstacles, used batteries:  
the remote control.  
Remove all obstacles which could disturb the signal of the  
remote control.  
Test or replace the batteries of the remote control.  
No picture or sound.  
Wrong cable connection, the video or audio connection  
cable is faulty:  
Check the connections on the DVD player and on the tele-  
vision.  
Wrong video dignal selected:  
Check the RGB/S-video-switiching (see page 18)  
The MUTE function has been activated:  
Deactivate this function as described on page 27.  
No sound from some loudspeakers,  
e.g. centre, surround or subwoofer.  
Activate the test tone (see page 19). If you hear a signal  
from all the loudspeakers, then the loudspeaker setting  
and cabling are correct. In this case the multi-channel  
mode is set incorrectly or the inserted disc does not pro-  
duce multi-channel sound.  
Check the multi-channel settings on the DVD receiver.  
Check the loud speaker settings in the set-up menu.  
No sound or insufficient bass tone  
coming from the subwoofer.  
The subwoofer has been connected incorrectly:  
Check to make sure the subwoofer has been connected  
properly.  
The inserted disc does not play.  
Make sure the printed side of the disc is facing upwards.  
Clean the disc. The DVD receiver cannot read the inserted  
disc format. Check to see if the inserted DVD has the  
regional code 2.  
The parental lock settings prevent the playback of the disc:  
Alter the parental lock settings (see page 23).  
Search, slow motion, playback repeat, The relevant functions are not available with the inserted  
programmed playback etc. do not  
work.  
disc.  
Insufficient MP3 playback or none at  
all.  
The sampling frequency 44.1 kHz has not been observed:  
Burn a new MP3 CD observing the sampling frequency.  
CD-Rs or CD-RWs are not played  
Faulty software or hardware settings during burning or  
back, or are played back incorrectly. the CD itself:  
Check the components of your CD burner/software or  
change the CD being used.  
Distorted audio signal during FM  
reception.  
Poor stereo reception:  
Correct the frequency manually or switch to mono (see  
page 39).  
Faulty antenna connection:  
Check the antenna connection.  
You have forgotten the personal access Enter the master code »8888«.  
code for the parental lock.  
You cannot operate the DVD receiver. Press »RESET« (on the back of the device) or pull out the  
mains plug for around two minutes.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Automobile Parts 308169J User Manual
Grizzly Car Seat H6166 User Manual
Hamilton Electronics Convection Oven 8534 01 User Manual
Hasbro MP3 Player 02015 User Manual
Hearth and Home Technologies Indoor Fireplace CASTILE GAS CSB User Manual
Honeywell Thermostat V4944 User Manual
Hotpoint Freezer RZS150G User Manual
HP Hewlett Packard Computer Drive 345524 B21 User Manual
HP Hewlett Packard Laptop ZV5000 User Manual
IKEA Plumbing Product AA 99076 6 User Manual