COLOUR
TELEVISION
32” LCD TV
GULCD32HDT
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
MAINS OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
WHAT ARE THE FUNCTIONS OF YOUR TV SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
ANTENNA CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
VIDEO, COMPUTER AND DECODER CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
CONNECTION TO EXTERNAL EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
CONNECTION TO EXTERNAL EQUIPMENT (PC AND HDMI) . . . . . . . . . . . . . . . . . . . . . . . . . .15
SWITCHING ON AND OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
TV FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
TV FUNCTIONS (MENUS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
TELETEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
BEFORE CALLING THE SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINS OPERATION
MAINS SUPPLY 230- 240 V ~ 50 Hz
MAINS PLUG
1. Two-Wire Power/Mains Lead Label
2. Three-Wire Power/Mains Lead Label
IMPORTANT
IMPORTANT
The wires in the mains lead are coloured in accordance with the The wires in the mains lead are coloured in accordance with the
following code:
Blue - Neutral
Brown - Live
following code:
Blue - Neutral
Brown - Live
Yellow/Green - Earth
As the colours in the mains lead of this
As the colours in the mains lead of this
GREEN
&
YELLOW
(Earth)
FUSE
FUSE
BLUE
(Neutral)
BROWN
(Live)
BLUE
(NEUTRAL)
BROWN
(LIVE)
appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be
connected to the terminal which is marked with the letter E, or
by the earth symbol, or coloured green or green and yellow.
The wire which is coloured blue or black must be connected to
the terminal which is marked with the letter N or coloured Black
The wire which is coloured brown or Red must be connected to
the terminal which is marked with the letter L or coloured Red..
If a 13 Amp (BS 1363) Plug is used, fit an ASTA approved 3, 5, or
13 amp fuse as required.
appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
No connection is to be made to the Earth terminal of the plug.
The wire which is coloured blue or black must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown or red must be connected to the
terminal which is marked with the letter L or coloured red.
If a 13 Amp (BS 1363) Plug is used, fit an ASTA approved 3, 5, or
13 amp fuse as required.
If your product is fitted with a moulded plug which requires
replacement please cut off and dispose of safely, then rewire as
shown above.
If your product is fitted with a moulded plug which requires
replacement please cut off and dispose of safely, then rewire as
shown above.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
Mains supply
This unit is designed to operate from a 230 Volt, 50Hz AC mains supply. Other power sources may damage it.
Check that the rating on the back of the unit says 230V AC ( ~ ) before you plug it in for the first time.
Mains plug
We have fitted this unit with a standard mains plug.
• If the mains lead gets damaged it must be replaced by a qualified service agent with an approved lead of the same type.
• If you cut off the mains plug, for example to fit a different type, please destroy the old plug as it would be dangerous if inserted
into a live power outlet. Carefully follow the wiring instructions supplied with the new plug.
• Remove the fuse from UK standard (BS 1363) plugs before disposal.
• Never use a mains plug without the fuse cover.
Mains plug wiring for the UK
• The colours of the wires in the mains lead of this unit may not match the coloured markings of the mains plug terminals. You can
identify the correct terminals as follows.
• The wire that is coloured BROWN is connected to the terminal that is marked with the letter L or coloured red.
• The wire that is coloured BLUE is connected to the terminal that is marked with the letter N or coloured back.
• Make sure the lead is firmly secured under the cord clamp.
• Do not connect anything to the earth terminal which is marked E or
or coloured green or green and yellow.
Mains fuse for the UK
UK standard (BS 1363) plugs must have a 3 amp (BS 1362 type) fuse fitted. For any other type of plug or connection, you
must fit a fuse rated between 3 and 5 amps in the mains plug or adapter, or at the fuse box feeding this unit.
Symbols
Dangerous voltage constituting a risk of electric
shock is present inside this unit.
This unit is double insulated and an earth
connection is not required
There are important operating and maintanence
instructions in the literature accompanying this unit.
This unit complies with European safety and
electrical interference directives.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT TO DO FOR SAFETY OF YOUR TV SET
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
VENTILATION
POWER SOURCE
The slots and openings on the TV are for ventilation.
Please ensure that there is enough space to allow for adequate
ventilation around the TV (at least 10cm).
You should only plug this TV into a 230-240V AC 50Hz
mains supply.
MAINS AND OTHER LEADS
Position the mains supply lead and other leads so that they
are not likely to be walked on, pinched by things or placed
on or against them. Pay particular attention to leads where
they enter a power socket and at the point where they come
out of the TV.
Do not block or cover these holes as overheating could occur.
CLIMATE
The intended environment of the TV set is detailed below. Do
not exceed these limits otherwise a Electric Shock Hazard may
exist.
Temperature-
0
MOISTURE AND WATER
15 - 35
Do not use the TV in a humid or damp area. The equipment
must not be exposed to dripping or splashing, as this may be
extremely dangerous. Objects filled with liquids, such as vases,
must not be placed on this equipment.
NO NAKED FLAMES
Do not place naked flame sources such as lighted candles on top
of the TV set.
Relative Humidity- 75% maximum
Climate Classification Moderate
Also under specification for the Sound output should be 2 x 7W.
REPLACEMENT PARTS
The person carrying out the job must use parts that are specified
by the manufacturer or have the same specifications as the
original parts. The use of other parts may cause fire, electric
shock or other hazards.
CLEANING
Always unplug the TV before cleaning it. Do not use liquid or
aerosol cleaners. Clean your TV with a soft damp cloth.
BATTERY DISPOSAL
You must dispose of the battery within the IR remote control in
accordance with your national law requirements. Some
countries prohibit the disposal of batteries with household
waste.
SERVICING
Ensure the person carrying out repairs to your TV is qualified to
do so. Please refer to separate service information supplied with
this product. Never remove the cover yourself, there are
dangerous voltages inside and you could receive an electric
shock.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION (continued)
GENERAL
• Do not connect or adjust cables while the TV is plugged into
the mains supply.
• Do not leave your TV in a hot, cold or humid area.
• Batteries in remote handsets can leak. Please check the
batteries regularly if they have not been replaced recently
• Never let anyone, especially children, push objects into holes
and ventilation slots.
• Don't continue to use your unit if you have spilt liquids in it, if
it is damaged in any way or if it does not work normally.
Immediately unplug the unit and get expert advice.
• This product is only designed for household or similar general
use. Any other use may invalidate the guarantee and might be
dangerous.
• We are proud to offer this high quality product. To keep this
equipment at this level of quality, this equipment should only be
serviced at your authorised service centre.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT ARE THE FUNCTIONS OF YOUR TV SET
Front
Rear
2.
3.
4.
5.
6.
7.
8.
9.
Remote control receiver and LED display
1.
ON/OFF switch
10. Aerial in
11. SCART connectors. (For connecting DVD, Video, Set
Top Boxes and similar equipment.)
12. S-VIDEO and S-AUDIO in
13. YPbPr in
14. YPbPr Audio in
15. PC in (Optional)
Speaker
V+ / V –
Audio up and down buttons
TV + / TV – Program up and down buttons
MENU button
AV selector button
Standby button
Side AV in / Headphone in
16. PC Audio in
17. HDMI in (Optional)
18. AV out (For Video and Audio transmission)
MENU
AV
6
7
5
TV–
TV+
V–
V+
4
8
9
3
3
2
14
12 13 18
16
15
10
11
17
1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
1. ON/OF (Stand-by) button
2. Direct program selection buttons
3. Zoom button (in the Cinema format)
4. Mute button
5. Menu selection button
6. Swap button
7. Increasing / decreasing program number in TV, or page number in teletext mode,
upward or downward scroll button in menus
8. Sound +/-, and menu setting buttons
9. Approval or cancellation button in menus
10. PIP button (in some models)
11. Permanent normalization button
12. Audio selection button DUAL A, DUAL B, Stereo, Mono
(DUAL A, DUAL B, ST/MONO)
13. AV button
14. Mosaic screen button ( available in some models)
15. Red button (circulates the PIP picture on the corners of the screen for PIP models, in
TV setting, it is used to leave HDMI and PC mode)
16. Green button (used to expand or reduce the PIP picture in PIP models, in TV mode
shifts to PC mode)
17. Yellow button (to shift to HDMI mode in TV mode)
18. Blue button (Picture Freezing button)
19. Picture format selection
20. Provides information on the current channel
To use the other button functions described in the menus, please check the remote
controller picture described in the TELETEXT section
10
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Note : The Remote Control will operate the TV up to 7 metre
a way and at an angle of 30 degrees.
Never drop your Remote Control.
Do not attempt to open your Remote Control.
.
.
BATTERY INSERTION (1,5V AAA x 2 pieces)
Do not press any 2 buttons on Remote Control • Remove battery cover
simultaneously.
• Place the batteries ensuring that the polarity is correct.
If you do not plan to use your Remote Control. for a long
time, remove the batteries.
• Close the cover.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
AERIAL CONNECTION
Aerial Connection......
First select the antenna. The following antennas are
suitable for your TV set.
* VHF antenna
* VHF / UHF combined antenna
* UHF antenna
When connecting one of these aerial to your TV set,
you should use 75 Ohm round “coaxial” cable and
unplug your TV set
Plug the external aerial in the aerial socket as show
oposite. An indoor aerial is not recommended. As
motor vehicles emulate energy and communication
lines emulate noise signals, please take care to install
your antenna far from these and metal surfaces. Do not
extend your aerial cable longer than required or roll it.
As the aerial and cable may be impaired by prolonged
exposure to rain, wind and smoke, we recommend that
they are periodically checked by a professional aerial
fitter. A poor aerial or cable often results by a "snowy"
picture.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO AND DECODER CONNECTIONS
1. Video tape connection (through coaxial cable)
3. Decoder Connection
* Connect antenna cable plug into the antenna input of your * Connect the antenna cable plug to the antenna inlet of the
video cassette equipment. (This is typically marked RF in)
decoder
* Connect the RF outpuut of your cassette equipment to the * Connect the antenna outlet of the Decoder (RF outlet) to the
antenna input of your TV set. You must use co-axial cable for antenna inlet of the TV set through coaxial cable
this.
* Ensure the decoder is switched on.
* Insert a video cassette and press play.
* Choose the channel to be used to view your video cassette
equipments output.
Note: If the display or volume are impaired, take the video tape
away from the TV set
DECODER
VIDEO
4. Decoder Connection (through scart cable)
* Connect the antenna plug to the antenna inlet of the TV set
* Connect the scart socket of the decoder to the scart socket of
the TV set through EURO scart cable
2. Video tape connection (through scart cable)
* Connect the antenna cable plug into the antenna inlet of the
video set
* Press “AV” button until scart is selected.
* Connect the SCART socket of the video tape and scart socket
of the TV set through EURO scart cable
* Press “AV” button until Scart is selected.
DECODER
VIDEO
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO EXTERNAL DEVICES
5. Receiver connection (Satellite Receiver)
c. With SVHS Socket
Connect the cable from the satellite dish to the “LNB-IN” inlet of
the Satellite Receiver.
* Connect the SVHS socket of the Receiver and that of your TV
set, through the SVHS cable. This provides a display
transmission
a. With Scart Socket
* For the volume, connect the Receiver’s (L, R) Left and Right
chinch volume outlets to the (L,R) Left and Right inlets of the TV
using double sided chinch socket cable.
* Connect the Satellite Receiver’s scart socket and your TV’s
scart socket using EURO scart cable.
* Press the “AV” button until scart is selected.
While the Receiver is on, press the AV button of the TV set until
the Receiver Display comes to the screen.
RECEIVER
OUT
DISH
LNB
TV
SVSH
V
L
R
DECODER SCART
TV SCART
AERIAL
RECEIVER
OUT
DISH
LNB
TV
SVSH
V
L
R
DECODER SCART
TV SCART
AERIAL
b. Connecting from the side AV Inlets (Optional)
* Connect the chinch sockets on the Receiver or Camera (Video,
Left Audio, Right Audio) to the sockets to the side of the TV
* Press the “AV” button on the RC until the Side AV position is
selected.
d) AV Out (Not available in some models)
• Use the AV outlets on theTV (Video, Left Audio, Right Audio)
to transmit the video and audio of the TV set to another
equipment.
RECEIVER
R
L
OUT
DISH
LNB
TV
SVSH
V
L
R
DECODER SCART
TV SCART
AERIAL
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO EXTERNAL DEVICES (PCI AND HDMI)
e) Component YPbPr In
*Video: Connect the DVD YPbPr sockets to the TV YPbPr
connectors using a 3 way AV cable.
g) DVD Connection (Optional)
The HDMI socket can also be used to connect a DVD to the TV.
* Sound: Connect the left and right (L,R) sound output
connectors on the DVD to the left and right sound input
connectors on the TV using AV cables.
Press the AV button on the TV RC until the signal from the DVD
is selected.
DVD
DVI
The resolutions which support PC & HDMI
OUT
AUDIO OUT
DISH
LNB
TV
SVSH
V
L
R
L
R
DECODER SCART
TV SCART
AERIAL
-
-
-
-
VGA
SVGA
XGA
640*480
800*600
1024*768
60 Hz/ 70 Hz/ 75 Hz
60 Hz/ 70 Hz/ 75 Hz
60 Hz/ 70 Hz/ 75 Hz
60 Hz/ 70 Hz/ 75 Hz
f) Computer Connection (Optional)
To use the TV as a monitor connect the computer VGA (Monitor)
output to the TV PC socket. The HDMI socket can also be used.
SXGA 1280*1024
PC
PC
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING ON AND OFF
Note: RC is an abbreviation for the Remote Control
b. Standby Mode
To turn off the TV for a short time period, press the
Standby button on the RC or TV
1. Turning On
If you are not going to use the set for a long time, press
the ON/OFF button on the TV set.
a. Turning on the TV
Set the mains switch at the rear of the TV to ON. (Move
the switch so that it "rocks" to wards the front of the TV.)
This places the TV in standby.
1. Selecting Program Number
• Using the P+- buttons on the TV control panel or RC,
you can select any program.
5
6
b. STAND BY MODE
Turn on the TV by pressing the
stand by button on
the RC, the stand by button on the front of the TV or the
P+/P- buttons on the TV.
•When you want to select a program between 1 and 9,
press the number on the RC
1
8
OK
2. Turning Off
a. Turning off the TV
•To select a number between 10 and 99, the program
number is pressed on the RC quickly on the RC.
Set the mains switch to OFF.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS
Example:
5. S/M/D button:
To shift to program No. 99, first press 9. In
For stereo broadcasting, you can change
the volume as Mono, Stereo or DUAL A, DUAL B.
that case a message "9" appears on the right corner of
the screen. Quickly press 9 again, the set changes to the
program no. 99
6. AV :
To shift to AV mode, press AV button on the RC.
The AV menu will appear on the screen. You can select
suitable AV modes using P+/P- buttons and confirm by
pressing OK. In the AV mode, you can pass to TV
mode using the numerical keyboard. If you are in
HDMI and PC mode, press red button to shift to TV
mode. As long as there is a menu on the screen, you
cannot shift your TV set to AV mode. Programs menu is
not available in the AV mode.
9
99
0
2. MUTE
To mute the sound, press MUTE button on the RC.
Pressing this button again will restore the sound at its
former level.
7. Automatic shutting down:
The TV set will
automatically change to stand by mode 5 minutes after
the broadcasting is over.
3. 16:9 button:
Auto, 16:9, 14:9, Cinema, Zoom and 4:3 picture
formats are available.
This is used to change the picture size.
Note: If you leave the TV in AV mode, it will not shift to
Standby mode after 5 minutes even there is no
broadcasting
Manual Zoom:
while in cinema mode to activate Manual Zoom.
Pressing V+/V- buttons will adjust vertical zoom.
Press the (
) Zoom button on the RC
8. OK Button:
This provides shift from the main menu
to submenu vice versa
4. PP:
Pressing this button will load the audio and
picture values in the memory. Pressing PP button for
about 2 seconds will memorize current TV audio and
pictures values as "User Settings" an on-screen message
confirms the settings have been stored.
9. Info Button (‹):
information on the current channel
Press this button to see the
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS
Swap:
You can return to the previous channel by
pressing this.
Note:
it.
If there is a menu on the screen, you cannot use
Mosaic:
This is not functional
Mosaic function is available in some models.
Note:
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS (MENUS)
Scrolling in the Menus
PICTURE
COLOR TEMP.
PICTURE PRESET
BRIGHTNESS
CONTRAST
When you press Menu button, the Main (Display) menu
appears on the screen. You can scroll in the main menu
options by pressing the left and right arrow buttons on
the remote and access to submenus by pressing OK to
make changes.
COLOUR
SHARPNESS
In the submenus, you can scroll up and down the
options by pressing the up and down buttons on the
remote and select values to change by pressing OK.
You can increase or decrease values by pressing the left
and right arrow buttons.
4. Press V+ 3 times to move to the INSTALLATION
menu. Press OK to access in the menu.
1. Installation (Automatic Search, Finding and
Memorizing)
INSTALLATION
Below is the automatic programming procedure for
your set. A more detailed explanation on the settings
and menus are given in the following pages.
AUTO TUNING
MANUAL TUNING
PROGRAMME TABLE
1. Connect your set and switch on
2. Press "Menu" button on the RC
The First (Display Menu) will appear on the screen.
3. Access to "INSTALLATION" menu by pressing the
arrow right button.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS (MENUS)
5. Press P+/P- buttons to access AUTO TUNING option 7. Access the SEARCH option pressing P- button
and confirm pressing OK
AUTO TUNING
COUNTRY SELECTION
SEARCH
UK
TO START
INSTALLATION
AUTO TUNING
MANUAL TUNING
PROGRAMME TABLE
8. Start an AUTO TUNING pressing “V+” button. An
OSD bar will appear on the screen to show that search
has been started.
6. Select suitable COUNTRY SELECTION pressing V+
button (if your country is not listed, press OTHERS)
AUTO TUNING
AUTO TUNING
_ _ _ _ _
PR. 3
10 %
COUNTRY SELECTION
SEARCH
UK
TO START
PRESS MENU TO STOP
Do not do anything until search is complete. Your TV
will find and memorize the channels automatically.
When the search is over, the PROGRAM TABLE menu
will appear on the screen.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS (MENUS)
Programme :
You can enter the program number to set,
using the numerical keyboard on the RC.
1 -------
2 -------
3 -------
4 -------
5 -------
6 -------
7 -------
8 -------
9 -------
10 -------
11 -------
12 -------
13 -------
14 -------
15 -------
16 -------
MANUAL TUNING
17 -------
18 -------
19 -------
20 -------
PROGRAMMESYSTEM
SYSTEM
1
EURO
NAME
SEARCH
FINE TUNE
PROGRAMLOCK
000 MHz
OFF
0
DELETE
SKIP
MOVE
OK : SELECT
Naming, program deletion, transfer and channel skip
in the “PROGRAM TABLE” are explained in the
following pages.
STORE : OK
System: You should select FRANCE for France, or
EURO for other European countries
MANUAL TUNING
For a manual setting, you can use the MANUAL
TUNING submenu in the “INSTALLATION” menu
Name:
You can name the channel. Access to the first
digit pressing V+ button and find the letter you want to
find using P+/P- buttons. Repeat the same process until
writing fully (5 characters)
INSTALLATION
AUTO TUNING
MANUAL TUNING
PROGRAMME TABLE
Search:
You can change the frequency pressing V+/V-
buttons to find your channel or directly enter the
channel number through numerical keyboard.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS (MENUS)
Fine:
PROGRAMME TABLE
Press V+/V- buttons to fine to the channel you
have adjusted.
MANUAL TUNING
INSTALLATION
PROGRAMME
SYSTEM
1
EURO
AUTO TUNING
NAME
SEARCH
FINE
PROGRAMLOCK
MANUAL TUNING
PROGRAMME TABLE
000 MHz
OFF
0
STORE : OK
Child Lock:
You can turn on or off the channel for
which you set a program lock, pressing V+ button.
PROGRAMME TABLE
Note:
You can also access to the locked channels
1 -------
2 -------
3 -------
4 -------
5 -------
6 -------
11 -------
12 -------
13 -------
14 -------
15 -------
16 -------
17 -------
18 -------
19 -------
20 -------
through the RC but you cannot access it using the P+-
7 -------
8 -------
9 -------
10 -------
buttons on the TV set.
MANUAL TUNING
PROGRAMME
SYSTEM
NAME
SEARCH
FINE
1
EURO
000 MHz
OFF
0
DELETE
SKIP
MOVE
OK : SELECT
PROGRAMLOCK
Delete (Red Button):
STORE : OK
While you are on the program which you want to
delete, press red button to delete.
You can memorize the settings in the "Channel Settings"
menu pressing OK.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS (MENUS)
Move (Green Button):
PICTURE Menu
1. Select the Program you want to move, using the
V+/V -, P+/P- buttons
2. Press green button, the program is highlighted.
3. Move the highlighted program to the desired row
pressing V+/V -, P+/P- buttons.
PICTURE
COLOR TEMP.
PICTURE PRESET
BRIGHTNESS
CONTRAST
4. Press the green button again, move process is over
COLOUR
SHARPNESS
Skip (Blue Button):
You can select the programs which you do not want to
be seen in the channel transitions which take place by
P+- button presses. While the cursor is on the related
program, it is sufficient to press the blue button.
In this menu, you can adjust the picture related
parameters.
OK Button:
Color Temperature:
You can select the required color
While in the Program Table, select the program by
pressing OK. Just press OK while you are on the
program which you want to be shown in the
background.
value pressing V+/V- buttons.
COLOR TEMP.
PICTURE PRESET
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
NORMAL
USER
60
90
50
75
23
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS (MENUS)
Picture Preset:
SOUND MENU
You can select the required picture
setting pressing V+/V- buttons. When you select "User",
you can change the below defined settings according to
your requirement.
SOUND
VOLUME
SOUND PRESET
SURROUND
AVL
BALANCE
BASS
TREBLE
COLOR TEMP.
PICTURE PRESET
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
NORMAL
USER
60
90
50
75
Volume
Set suitable sound value pressing V+/V-
Brightness:
You can set suitable Brightness pressing
SOUND
V+/V- buttons
VOLUME
SOUND PRESET
10
FLAT
OFF
OFF
Contrast:
buttons
You can set suitable Contrast pressing V+/V-
SURROUND
AVL
0
50
55
BALANCE
BASS
TREBLE
Colour:
V+/V-
You can adjust suitable Colour value pressing
Sharpness:
Adjust suitable value pressing V+/V-
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS (MENUS)
Bass:
Adjust "Bass" value pressing V+/V-
SOUND
VOLUME
Treble:
Adjust "Pitch" value pressing V+/V-
10
FLAT
OFF
OFF
SOUND PRESET
SURROUND
AVL
0
50
55
BALANCE
BASS
TREBLE
Sound Preset:
You can select predetermined sound
values pressing V+/V- buttons. Select PERSONAL to set
your own values (Bass, High Pitch)
Surround:
You can activate or de-activate the surround
sound effect pressing V+/V- buttons
AVL:
You can activate or de-activate the AVL feature
pressing V+/V- buttons. AVL keeps the sound level at
the same level.
Balance:
You can adjust the balance of sound between
the left and right speakers using the V+/V- buttons.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS (MENUS)
FEATURES MENU
Language:
buttons
Select the menu language pressing V+/V-
Transparency:
pressing V+/V- buttons
You can set the menu transparency
FEATURES
LANGUAGE
TRANSPARENCY
RESET
TIME
Reset:
You can restore the settings to default values
pressing V+/V- buttons
Time:
You can set time and time set program change in
the menu.
You can use this menu to Features menu and time.
FEATURES
LANGUAGE
TRANSPARENCY
RESET
ENGLISH
TO START
0
FEATURES
TIME
LANGUAGE
TRANSPARENCY
RESET
ENGLISH
TO START
0
TIME
26
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS (MENUS)
Clock:
keyboard
You can enter time data using numerical P- button
7. Press V+ button and enter the number of the channel
you want to be switched on
TIME
8. Press V+ button and enter sound level using
numerical keyboard
9. You can return to Features menu pressing OK button
CLOCK
OFF TIME
ON TIME
00 : 00
00 : 00
00 : 00
PR.
OFF
OFF
1
VOL
10
AUTO SHUT OFF
OFF
TIME
CLOCK
OFF TIME
ON TIME
00 : 00
00 : 00
00 : 00
PR.
OFF
OFF
1
VOL
10
AUTO SHUT OFF
OFF
Off time:
You can set the time when you want the TV
set to switch off. To activate the function, enter the
switching off time and access "Off Time" using V+
button and turn it to "OPEN" using P- button. The TV set
will switch of at the specified time.
On time
While in the Time Menu
1. Press P- button to select "On Time"
2. Press V+ button and access to time section
3. Enter the time for switching on using numerical
buttons
4. Press V+ button to select minute section
5. Enter minute using numerical keyboard
6. Press V+ button and select On Time to activate using
27
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS (MENUS)
All menus appear in the PC and AV Modes. The In this menu, there are "Red, Green and Blue" colour
additional menus in PC monitor use are as follows:
options for PC Monitor. You can set the colour values
according to your request pressing V+/V- buttons.
PC Monitor Picture Menu
PICTURE
SCREEN
COLOR TEMP.
BRIGHTNESS
CONTRAST
RED
GREEN
BLUE
NORMAL
66
50
50
50
COLOR TEMP.
BRIGHTNESS
CONTRAST
RED
GREEN
BLUE
28
Download from Www.Somanuals.com. All Manuals Search And Download.
TV FUNCTIONS (MENUS)
PICTURE MENU
Horizontal position:
You can slide the PC display on the
screen to right or left horizontally, pressing V+/V-
buttons.
(This menu is only available when a
PC signal is present.)
PICTURE
AUTOCONFIGURATION
HORIZONTAL POS.
VERTICAL POS.
CLOCK
Vertical position:
screen to up or down vertically, pressing V+/V- buttons.
You can slide the PC display on the
Clock:
You can set the time pressing V+/V-. Changing of
PHASE
this value will provide enlarging or narrowing of the
picture on the right side.
1024x768
75Hz
Phase:
Set the phase pressing V+/V- buttons.
Auto Configuration:
On this option, pressing the V+
button will automatically carry out the PC monitor
settings.
PICTURE
AUTOCONFIGURATIONYATAY P
TO START
71
60
HORIZONTAL POS.
VERTICAL POS.
CLOCK
1369
70
PHASE
1024x768
75Hz
29
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT
1. Teletext button
2. Reveal / Conceal:
Press the button to reveal
2. Reveal / Conceal (Reply)
button
answers to quiz or games page. Press again to conceal
to answers.
3. Teletext timer button
4. Cancel (updating) button
5. Size (page enlargement)
button
3. Teletext timer:
While watching a TV programme
press this button to display the time at the upper right of
the screen. The time will be displayed for about 4
seconds. If the program being watched does not have
Teletext transmission the time will not be displayed.
6. Mix (Combined TV and
Teletext watching) button
7. Hold (Lower page holding)
button
4. Cancel:
Pressing this button in the Teletext
mode causes the current TV programme to be
displayed in some TV models.
8. Index (Main page) button
9. Color (Red, Green, Yellow,
Blue) buttons
But teletext is still active, and if a new page number is
entered, page search continues. When the requested
page is found, a message showing the page number
appears on the screen. Pressing this button again
displays the new teletext page.
TELETEXT MODE
If the current channel has a teletext broadcast, you can
change to teletext mode as described below.
5. Size :
Press once to display the upper half of
the page at double text height. Press again to display
the lower half of the page at double text height. Press
again to display the full page at normal height.
1. Teletext :
teletext. Press again to revert to TV.
Press the teletext button to select
30
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT
EXAMPLE:
6. Mix: (Combined TV and Teletext broadcasting):
Press to superimpose Teletext over the TV programme.
Press again to display the Teletext page alone.
Press RED
button to
receive TV
Guide
Press GREEN
button to
Press YELLOW
button to
Press BLUE
button to
receive sports
information
receive news
receive weather
information
7. Hold:
If a teletext page has subpages, such
pages are displayed at certain time intervals. In such a
case, press this button to keep a specific page
permanently on the screen. When the page is held
pressing "HOLD", the Hold icon appears on the upper
left corner of the teletext page. Pressing this button
again leaves from the hold setting.
TV GUIDE
SPORTS
NEWS
WEATHER
(The above information are for example purposes, such
information may change depending on the selected
page)
8. Index (Main Page):
This button provides direct
access to the index page of teletext.
Fastext
9. Colour Buttons (RED / GREEN / YELLOW / BLUE)
You can easily scan the teletext data by pressing these
four coloured text buttons. While this mode is active,
pressing MENU button changes colour options and you
can access any option of your request easier using the
colour buttons
This Tv supports the Fastext system. When a page is
requested the system automatically stores the adjacent
pages. These can be selected by using P+ to select the
next Teletext page and P- to select the previous Teletext
page.
Fastext Buttons (Red, Green, Yellow and Blue). Pages
related to the current page are also stored in memory
can be quickly reached by pressing the appropriate
coloured button.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE CALLING SERVICE
Caution:
When the TV set is operated at ambient temperatures of 5 degree Celsius or lower, there will be a focus disorder and colorization problem
(pinking) at the first switching on. Your set provides normal display in 10 to 15 minutes. Operating the set in such adverse ambient
conditions will reduce its life. So, do not operate it at low ambient temperatures (5 degree Celsius or lower).
If you have a problem with your TV please check the Symptom and Recommendation. If this fails to cure the problem you will need to
contact an authorised service company. If the problem persists, please apply to an authorized service.
Symptom
Recommendation
No picture
• Plug your TV to an operating outlet
There is no light on the screen
No sound
• Press ON/OFF button on the TV
• If the standby indicator lights, press program numbers on the RC or P buttons on the TV
• Check the antenna
• Check the brightness, color or contrast
• Check the video inlet
No or weak picture
There is no light on the screen
Normal sound
• Check the VGA cable in case of monitor use
• If the Mute symbol
appears on the screen, press
Mute button on the RC once more
Picture is normal
No sound
• Raise the sound level on the TV set or RC
• Check the color setting
• Fine tune for a more clear display
There is no color on the color
broadcast or the colors are not normal
• Fine tune
• Check the aerial
Picture is snowy or there are noises
There are dotted lines or lines
• This might be caused by internal noises (For example motor vehicles, neons, hair dryers etc.)
Set the aerial direction to minimum noise
• Also the adjacent buildings may have some reflections. You can correct the display by raising the
aerial
Double picture or shadows
Check if the set is in correct mode. Check the external DVI or VGA cable
There is no display on the DVI or PC
mode
32
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
Screen size
32"
Standard nominal value (cm)
Power consumption (Watt)
Operating voltage
TV System
66 cm
150 W
230 V (AC) 50 Hz
MULTI SYSTEM / NTSC PLAYBACK
VHF I Channel 2-4
VHF III Channel 5-12
UHF Channel 21 - 69
S Channel S1 - S41
75 Ohm standard aerial socket
99 + AV
Channel Band
Antenna inlet
Program capacity
Picture Panel
TFT LCD Panel 1280 x 768 resolution
2 x 8 W
Audio output (rms 10% THD)
CAUTION
There might be incompatibilities between this manual and the set.
Manufacturer Company reserves its right to alter specifications of its products.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
MODEL NO: GRUNDIG GULCD32HDT
Download from Www.Somanuals.com. All Manuals Search And Download.
065 001 055 330
Download from Www.Somanuals.com. All Manuals Search And Download.
|