Grundig Flat Panel Television 32 VLD 8130 SL User Manual

LCD TV

32 VLE 8130 SL

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents_{--------------------------------------------------------------------------------------------------------------------------------------}

57- operAtion-usinG-externAl-

DeviCes

57 DIGI LINK

57 The DIGI LINK functions on your television

58 Device operation

59 High definition HD ready

59 Connection options

60 Connecting external devices

61 Using a DVD player, DVD recorder,

video recorder

or set-top box

61 Headphones

62 Hi-fi System

64- operAtion-As-A-pC-monitor

64 Connecting a PC

64 Selecting presets for the PC

64 Settings for PC mode

65- operAtion-witH-A-Common-

interFACe

65 What is a Common Interface?

65 Inserting the CA module

65 Access control for CI module and

smart card

66- speCiAl-settinGs

66 Searching for digital television channels

from a satellite automatically

67 Searching for digital television

channels from a satellite manually

67 LNB settings

68 Settings for motorised antennas

(DiSEqC 1.2)

71 Searching for digital terrestrial

TV channels automatically

72 Searching for digital terrestrial

TV channels manually

73 Tuning analogue television channels

74 Changing stored analogue channels

76- inFormAtion

76 Displaying signal information

77 Technical data

78 Service information for dealers

78 Environmental note

79 Troubleshooting

-3

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

setup-AnD-sAFetY_{-------------------------------------------------------------------------------------------------------}

Please note the following instructions when

setting up the television set:

Make sure the power cord or the power sup-

ply unit (if provided) are not damaged.

This television is designed to receive and dis-

Only operate the television with the power

supply/power cord provided.

play video and audio signals.

All other uses are expressly prohibited.

Thunderstorms are a danger to all electrical

devices. Even when the television is switched

off, it can be damaged by a lightning strike to

the mains or the antenna. Always disconnect

the mains and antenna plugs during a storm.

The ideal viewing distance is five times the

diagonal screen size.

Light falling on the screen impairs picture

quality.

Use a damp, soft cloth to clean the screen.

Do not use water with soap or detergent.

To ensure the device is always adequately

ventilated, make sure there is sufficient space

between the television set and nearby furni-

ture.

Only clean the housing of your television set

with the cloth provided. Do not use water with

soap or detergent.

The television is designed for use in dry rooms.

If you do use it outdoors, make sure it is pro-

tected from moisture such as rain or splashing

water.

When deciding where to put the device, re-

member that furniture is often coated with

various types of varnish and plastic. Many of

these contain chemicals which can corrode

the feet of the device, leaving marks on the

surface of the furniture which can be difficult

or impossible to remove.

Never expose the television set to moisture.

Do not place any vessels such as vases on the

television, as they may spill liquid, thus present-

ing a safety risk.

The screen of your LCD/LED television meets

the highest quality standards and has been

checked for pixel faults.

Despite the great care taken in manufacturing,

technological reasons make it impossible to

completely discount the possibility that some

pixels may be faulty.

Provided they are within the thresholds speci-

fied by the DIN norm, pixel faults of this kind

cannot be regarded as a defect as defined by

the warranty.

Place the television on a hard, level surface.

Do not place any objects such as newspapers

on the television or put cloth or similar items

under it.

Do not place the television close to heating

units or in direct sunlight, as this will impair

cooling.

Heat build-up can be dangerous and shortens

the service life of the television. For reasons of

safety, have a repairman remove any dirt in

the television from time to time.

To ensure fires do not occur,

always keep candles and

other open flames away from

the device.

Never open the television under any circum-

stances. Warranty claims are excluded for

damage resulting from improper handling.

-4

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

setup-AnD-sAFetY_{-------------------------------------------------------------------------------------------------------}

Do not connect any other equipment while the

device is switched on. Also switch off other

equipment before connecting it.

Do not plug in the power cord of the device

until you have connected the external equip-

ment and the antenna.

Make sure the mains plug is freely accessible.

Do not expose the batteries to excessive heat

such as direct sunlight, fire, etc.

Do not use old and unused batteries together.

Only replace the exhausted batteries with

those having the same model, value and prop-

erties.

By ensuring proper disposal of these batteries,

you will have contributed in prevention of po-

tential hazards on the environment and human

health that may arise from inappropriate dis-

posal of the batteries.

Caution:

If you plan on using a wall bracket for your

television, make sure you read the assembly

manual for the wall bracket or have a spe-

cialist assemble it.

When purchasing the wall bracket, make

sure that all the fastening points on the televi-

sion are also on the wall bracket and that

they are all used when mounting it.

-5

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

GenerAl-inFormAtion_{----------------------------------------------------------------------------------}

You can record any digital TV channels you

special-features-of-your-

choose.

-television-set

The TV channels are converted by the televi-

You can receive and watch digital TV chan-

nels using your television set (via DVB-S, DVB-T

sion and saved on an external data medium

which is connected to the USB socket.

and DVB-C) – including High Definition pro-

The saved programmes can be called up and

grammes (HD). However, the reception of digi-

played from the archive on the external data

tal TV channels in HD is currently limited to a

medium at any time.

few countries in Europe.

You can also play a programme from the

archive while recording another.

More information on recording and playing

TV programmes can be found from page 38.

Although this television set complies with the

current DVB-S, DVB-T and DVB-C standards

(status: August 2010), the compatibility with

future DVB-S satellite transmissions as well

as terrestrial DVB-T and DVB-C cable pro-

grammes cannot be guaranteed.

Smart Inter@ctive TV feature provides your TV

with the Internet services and pages when it is

connected to the Internet. You can visit popu-

lar video and photo sharing sites as well as

social networks. And you can watch TV and

listen to radio on web.

Your television set can receive and process

all analogue and non-encrypted digi-

tal TV channels. The television set is also

equipped with digital and analogue receivers.

DLNA feature allows you to use a wired or

wireless local network to access your content

that were recorded with DLNA compatible de-

vices we use at our daily lives such as a PC,

mobile phone or NAS (Network Attached

Storage) which are operated as DMS (Digital

Medial Server). Thanks to DMR feature, when

DLNA application has been started, you can

automatically start and stop media playing on

devices with DMC feature.

The electronic TV guide (for digital channels

only) informs you about any schedule changes

at short notice, and provides an overview of

all the broadcasters' schedules for the next few

days. Detailed information on the individual

television programmes are – when provided

by the broadcasting station – are also avail-

able in the electronic TV guide.

You can connect various data media, such as

an external hard drive, a USB memory stick or

a digital camera, to the USB socket. Using the

file browser, you can then select and play the

file formats of your choice (for example, MP4,

MP3 or JPEG data).

Devices that contain and serve video, music

or image files are called Server. This television

receives video, music and image files from the

server through home network, allowing you to

access and play such media even when your

television is located in a different room then

the server. A DLNA compatible device such as

a PC, mobile phone, NAS or a NAS-like (Net-

work attached storage) device which operates

as a DMS (Digital Media Server) is required

in order to use home network.

Using the time shift function, you can quickly

and easily pause a programme using the re-

mote control and resume it at a later stage.

The programme is recorded in an external

data medium.

-6

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

GenerAl-inFormAtion_{----------------------------------------------------------------------------------}

As switching off the television set does not

receiving-digital-channels

completely disconnect it from the mains, pull

You require a satellite antenna to receive

out the plug to disconnect it from the mains

digital satellite channels (DVB-S).

completely.

Your TV supports SCR system (Satellite Chan-

nel Router). If your antenna installation is

equipped with an Single Cable Distribution

multiswitch, all television sets which are con-

nected on this antenna can receive the televi-

sion channels stand-alone.

If the device is equipped with a power switch,

switching it off using this switch will be suffi-

cient. The energy consumed by the television

set is reduced to virtually 0 W.

In standby mode, the television set uses very

little energy. However, it may be necessary

to leave the television set in standby mode

for certain functions (for example automatic

switch-on and switch-off and for timer func-

tions).

You require a digital roof antenna or indoor

antenna (passive or active indoor antenna

with its own power supply) to receive digital

television channels (DVB-T).

If you wish to receive digital television chan-

nels via your cable system (DVB-C), the an-

tenna cable for your cable operator must be

connected to the television set.

The television set uses less energy when the

brightness is reduced.

notes-on-still-images

Unlike analogue broadcasting, not every

channel has its own transmission frequency.

Instead, several channels are grouped into

what are known as bouquets on a regional or

national level. You can find the current trans-

mission information on teletext from various

broadcasters, or by consulting a current TV

guide or the Internet.

Watching the same image for a long time on the

screen may cause a still image remains feebly on

the background. Feeble image(s) on the back-

ground is originated from LCD/LED technology

and does not require any action under guaran-

tee. To avoid such cases and/or minimize the

impact, you may observe the tips below.

Various digital television channels from private

broadcasters are encrypted (DVB-S, DVB-T

and DVB-C). Watching these channels and

the recording and playback functions are only

possible with the appropriate CI module and

a SmartCard. Ask your specialist dealer.

The range of channels available from the pub-

lic broadcasting institutions (ARD with EinsEx-

tra, EinsFestival or ZDF with ZDF Info and all

third party broadcasters) are not encrypted

and can be received without a SmartCard.

Do not allow the same TV channel to stay on

the screen for a very long time. Channel logos

may cause this situation.

Do not allow the images, which are not full

screen, to constantly stay on the screen; if not

streamed in full screen format by the broad-

caster, you can convert the images to full

screen by changing picture formats.

Higher brightness and/or contrast values will

lead this impact to appear faster; therefore,

you are recommended to watch your TV in the

lowest brightness and contrast levels.

important-notes-on-

environmental-protection

The following information will help you to save

resources – and money as well.

If you are not using your television set for

several days, you should pull out the mains

plug for environmental and safety reasons.

This way the television does not consume any

electricity.

-7

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

ConneCtion-AnD-prepArAtion_{------------------------------------------------}

Connecting-the-antenna-and-power-cord

To receive digital satellite channels (DVB-S),

connect the satellite antenna cable to the

antenna socket »sAtellite« on the televi-

sion set.

note:

When connecting an indoor antenna you

may have to try it out at different positions

until you get the best reception.

Plug the power cord into a wall socket.

And/or:

note:

2a To receive terrestrial digital broadcasters

(DVB-T) connect the cable for the rooftop

or indoor antenna (passive or active indoor

antenna with its own power supply) to the an-

tenna socket »Ant-in« on the television set;

Do not plug in the power cord of the device

until you have connected the external equip-

ment and the antenna.

Only use the power cord supplied to connect

the television set to a suitable earthed safety

socket.

2b To receive digital cable channels (DVB-C)

connect the cable for the rooftop antenna

to the antenna socket »Ant- in« on the

television set;

Do not use an adapter plug or extension

lead which does not meet the applicable

safety standards. Do not tamper with the

power cord.

2c To receive analogue TV channels, connect

the cable for the rooftop antenna to the an-

tenna socket »Ant-in« on the television set

-8

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

ConneCtion-AnD-prepArAtion_{------------------------------------------------}

environmental-note

inserting-batteries-into-the-

-remote-control

This symbol on recharge-

able batteries/batteries or

on the packaging indicates

that the rechargeable bat-

tery/battery may not be disposed of with

regular household rubbish. For certain

rechargeable batteries/batteries, this sym-

bol may be supplemented by a chemical

symbol. Symbols for mercury (Hg) or lead

(Pb) are provided if the rechargeable batter-

ies/batteries contain more than 0.0005%

mercury or more than 0.004% lead.

Rechargeable batteries/batteries, including

those which do not contain heavy metal,

may not be disposed of with household

waste. Always dispose of used batteries

in accordance with local environmental

regulations. Make enquiries about the appli-

cable disposal regulations where you live.

Open the battery compartment by removing

the lid.

Insert the batteries (2 x 1.5 V micro, for

example R03 or AAA). Observe the po-

larity marked in the bottom of the battery

compartment.

Close the battery compartment.

note:-

If the television no longer reacts properly

to remote control commands, the batteries

may be flat. Always remove used batteries.

The manufacturer accepts no liability for

damage caused by leaking batteries.

-9

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

overview_{-------------------------------------------------------------------------------------------------------------------------------------}

Connections-on-the-television-set

Av1-/-s-vHs

SCART socket (CVBS signal,

RGB signal);

Video and sound socket for

S-Video camcorder.

AuDio-out-l-r Sockets for audio output.

Audio

Socket for audio

input for a PC.

pC-in

VGA socket, video input

for PC.

Component

---Y-pb-pr

Sockets for video input

(YUV signal).

Sockets for audio input

(YUV signal).

sAtellite

Ant-in

Antenna socket for the

satellite antenna (DVB-S).

l--r

Antenna socket for a DVB-T,

DVB-C and analogue

antenna.

optic-out

Socket for audio output

(optical) for PCM/AC3

signals.

For connecting digital AV

amplifiers or AV receivers.

-10

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

overview_{-------------------------------------------------------------------------------------------------------------------------------------}

HDmi2-(ArC) HDMI socket,

Controls-on-the-television-set

audio/video input.

8/i-

Switches the television on and

back into standby mode.

HDmi3

HDMI socket,

audio/video input.

v–--v+

menu-

Adjusts the volume;

selects menu functions.

HDmi4

HDMI socket,

audio/video input.

-Opens the menu.

usB2-(HDD)-

-USB socket for external

data media and

PVR function.

Select a menu option with

»p+« or »p–«.

Activate the function with

»v+«.

lAn

Network cable connection

socket.

Confirm the function with

»v+« or »v–«..

Press »menu« to quit the menu.

Headphone jack (3.5 mm

jack plug);

Sockets for audio output.

sourCe- Opens the pre-selection for

AV channels.

In the menu, press »p+« or »p–«

to select and press »sourCe« to

confirm.

Av2

---video-

-Video socket for

camcorder

p–--p+

Switches the television on from

standby;

selects channels in steps;

selects function in the menu.

l--r-

Audio socket for

camcorder.

usB1

-USB socket for external

data media without a power

supply of their own and

PVR function.

HDmi1

Ci- -

HDMI socket,

audio/video input.

-Common Interface Slot.

-11

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

overview_{-------------------------------------------------------------------------------------------------------------------------------------}

the-remote-control-–-main-functions

Switches on and off

(Standby).

Switches on from standby;

Selects channel – directly.

Switches between

Selects the channel list

teletext and TV mode;

opens/closes the control

menu when playing a file in

DLNA menu.

(»All«, »FAV 1« to »FAV 4«).

Key has no function.

Opens the Smart inter@ctive

menu.

Displays information.

Opens the main menu.

Opens the channel list.

-Zapping function;

switches back one menu

level in the menus.

Opens the electronic

TV guide.

Opens the TOOLS menu.

Adjusts the volume.

Opens menu for AV channels

and USB input.

Then select using »

v«, » «,

» « or » « and press »oK«

to confirm.

Muting

Switches on from standby;

Selects channel – in steps.

Record, play, pause and

stop (only digital television

channels) on/from an exter-

nal data medium.

Opens the »PRnP« menu.

navigation-in-the-menus

Moves the cursor up

and down in the menus.

right in the menus.

-Activates various functions and

save functions/settings.

-12

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

overview_{-------------------------------------------------------------------------------------------------------------------------------------}

Freeze frame, if no external data

medium is connected;

the-remote-control-–--

All-functions

Playback pause;

Opens the Smart inter@ctive menu.

Time shift mode (only for digital

television channels and when

an external data medium is con-

nected);

Pauses the file being played in

DLNA and vTuner menu.

-

Selects pages in teletext;

Selects/activates various functions

in the menus.

(red)



(green)

(yellow)

(blue)





Selects different audio settings;

Switches to double character size

in teletext;

Ends playback of a programme

from an external data medium;

Ends a recording or

playback in time shift mode;

Splits the screen in teletext;

Ends playing in DLNA and vTuner

menu.

Selects the next title/next picture in

the file browser.

Selects different picture settings;

Refreshes a teletext page;

Selects the previous track/previous

picture in the file browser.

Selects different audio languages

(only for digital television chan-

nels)

Stops scrolling through pages in

teletext;

Starts a fast reverse search in the

file browser.

Selects different subtitles

(only for digital television chan-

nels)

Selects the channel list ( »All«,

»FAV 1« to »FAV 4«);

note:-

Your TV supports remote control feature

for Apple iPhones and Android phones.

Depending on the features of your TV,

you may control your TV by your phone

after downloading the free »GRUNDIG

TV Remote« application from Apple App.

Store or Android Market and install it on the

Apple iPhone/Android phone.

Reveals answers in teletext;

Starts a fast forward search in the

file browser.

Starts the recording (

tal television channels

only for digi-

, the record-



ing is made on an external data

medium).

Starts playing a programme from

an external data medium;

Repeats a recorded programme;

Starts playing in DLNA and vTuner

menu.

-13

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

settinGs_{------------------------------------------------------------------------------------------------------------------------------------------}

selecting-language,-country-and-

operating-mode

initial-set-up-and-tuning-

-television-channels

The television set is equipped with automatic

channel search, which searches for satellite

channels (DVB-S), terrestrial channels (DVB-T),

cable channels (DVB-C) and analogue channels.

Switch on the television set from standby with

»8«, »1…0« or »p+« or »p-«.

– During initial set-up, the »Installation Guide«

will be displayed.

You start the search and the television channels

will be stored into the Program Table. Following,

you can sort the television channels in the Pro-

gram Table.

Help:-

If this menu is not displayed, restore the

television set to its default settings (see

page 56).

For DVB-S channels there are 6000 presets

available, for DVB-T and DVB-C channels 1000

presets, and 99 presets for analogue channels.

2- Select the menu language with » «, » «,

»v

« or »

Λ« and press »oK« to confirm.

3- Select the mode with » « or » « and press

»oK« to confirm.

the-various-settings

– The settings used in »Home Mode« help to

save energy.

– Alternatively, the menu item »Shop Mode«

can be selected which the retailer can use

for demonstrating the device functions.

Depending on the type of antenna connected,

you can decide which channels you would like

the television to search for.

Tunes digital television channels from the satel-

lite, from page 15.

note:

You have two options for this search:

– the basic installation which presets a stand-

ard selection, e.g. the satellite Astra 19.2°

East; you need only start the search;

– the professional installation, which allows

you to make all required settings and set pa-

rameters for your receiver system.

End the »Shop Mode« by restoring the televi-

sion set to its default settings (see page 56).

4- Select the country in which the television set

is operated with » «, » «, »v« or »Λ« and

press »oK« to confirm.

– The »Source Setup« menu appears with the

»Connection Type« line marked.

Tunes digital terrestrial television channels, on

page 17.

note:

You can find a description of how to tune

Tunes digital television channels from the

cable provider, on page 17.

the television channel of your choice – de-

pending on the antenna connected – in the

following chapters.

Tunes analogue television channels, in the

chapter “Special functions”, starting on

page 73.

Further settings for digital television chan-

nels after the initial set-up can also be found

in the chapter “Special Settings”, starting on

page 66.

note:-

Make the language and country selection for

all types, then continue reading the respective

chapter.

-14

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

settinGs_{------------------------------------------------------------------------------------------------------------------------------------------}

Advanced-installation

tuning-the-television-channels-

from-satellite-(DvB-s)

You have two options for tuning digital satellite

channels.

In the »Source Setup« menu, in the »Connec-

tion Type« line, select the option »Satellite«

with » « or » «.

Select the line »Advanced Installation« with

The easy installation,

which pre-configures all antenna settings for

the satellite channels on Astra 19.2° East.

v« or »Λ« and press »oK« to confirm.

– The menu appears.

20.07.2011

15:46

The advanced installation

INSTALLATION

ANTENNA SETTINGS

can be used if you wish to receive satellite

channels from various satellites. To do so,

you must make the antenna settings (Satel-

lite, LNB Power, LNB Type, DISEqC Mode,

LNB Selection) for the satellites chosen.

Satellite

ASTRA 2A°,E

10714

Off

Transponder

LNB Power

LNB Type

easy-installation

Universal

Off

In the »Source Setup« menu, in the »Connec-

tion Type« line, select the option »Satellite«

with » « or » «.

DISEqC Mode

LNB Selection

Off

Select the line »Easy Installation« with »

or » « and press »oK« to confirm.

v«

Low

Normal

Good

Quality

– Other menu options will be displayed,

the satellite Astra 19.2° East is preset.

Signal strength

Exit

Auto Tuning

Back

Start the scan with » « (green).



Manual Tuning

– The »Search results« menu appears, and

the scan for TV channels begins.

– Depending on the number of television

channels received, this can easily take a

few minutes.

Select the line »Satellite« with »

v« or »Λ«

and press »oK« to confirm.

– The »SELECT SATELLITE« menu appears.

Select the satellites with »v«, »Λ«, » « or

– The scan is complete as soon as the »PRO-

GRAM TABLE« appears.

» « and press »oK« to confirm.

note:

The setting in the line »Transponder« is not

required for this automatic scan.

You can abort the scan by pressing

»menu«.

Select the line »LNB Power« with »

v« or

Λ«.

Depending on the type of LNB, set the LNB

power supply to »13/18 V« or »14/19 V«

with » « or » «.

Select the line »LNB Type« with »v« or »Λ«.

Select the type of LNB installed with » «

or » «.

-15

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

settinGs_{------------------------------------------------------------------------------------------------------------------------------------------}

6- Select the line »DISEqC Mode« with »

11 Start the scan with » « (red).



or »Λ«.

– The »Results« menu appears, and the scan

for TV channels begins.

Select »DiSEqC 1.0« or »DiSEqC 1.1« in

accordance with the existing antenna system

with » « or » «.

– Depending on the number of television

channels received, this can easily take a

few minutes.

– The scan is complete as soon as the »PRO-

GRAM TABLE« appears.

– DiSEqC 1.0 allows up to four satellites to

be received simultaneously.

– DiSEqC 1.1 allows up to 16 satellites to be

received simultaneously.

note:

7- Select the line »LNB Selection« with »

«.

v« or

You can abort the scan by pressing

»menu«.

»Λ

Select the setting for the respective satellites

with » « or » «.

12 Press »menu« to end the setting.

note:

8- Once the settings for the satellite have been

made, switch to the »AUTOMATIC CHAN-

NEL SEARCH« menu with »« (red).

If other television channels are to be tuned

from a second satellite, proceed as follows:

Open the menu with »menu«, select the

20.09.2010

SOURCE SETUP

15:46

line »SOURCE SETUP« with »v« or »Λ«

AUTOMATIC CHANNEL SEARCH

and press »oK« to confirm. Then select the

»Automatic Channel Search« with » « or

« and press »oK« to confirm. Confirm

the line »Select Satellite« with »oK« and

select the preferred satellite with » «, » «,

»Λ

Connection Type

Select Satellite

Scan Mode

Satellite

ASTRA 2A , E

Free + Scramble

» « or » «. Start the scan with » « (red).



Continue the adjustment by step 7 of the

Service Type

All

chapter.

Network Search

Off

note:

Before recording HD channels, please

check signal quality and Strength, see

chapter "Displaying signal information" on

page 76. If the level is displayed in green,

you can record HD channels without any

problems.

Exit

Back

Start Search

Select the line »Scan Mode« with »

or » «.

Select the scan mode with » « or » «

(for unencrypted channels, for encrypted

channels only, or for both).

v«

10 Select the line »Service Type« with »

or » «.

Use » « or » « to select whether you

v«

want to search for television channels only

(TV), radio stations only (Radio) or both

(Radio + TV).

-16

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

settinGs_{------------------------------------------------------------------------------------------------------------------------------------------}

tuning-terrestrial-television-

channels-(DvB-t)

tuning-television-channels-from-

the-cable-provider-(DvB-C)

In the »Source Setup« menu, in the »Connec-

tion Type« line, select the option »Cable«

with » « or » «.

In the »Source Setup« menu, in the »Connec-

tion Type« line, select the option »Air« with

» « or » «.

Select the line »Scan Type« with »v« or »Λ«.

Select the line »Scan Type« with »

«.

Use » « or » « to set the required scan

v« or

Use » « or » « to set the required scan type:

»Λ

– »DTV«, scan for digital television channels;

– »ATV«, scan for analogue television channels;

type:

–

»ATV & DTV«, scan for analogue and

digital television channels.

– »DTV«, scan for digital television channels;

– »ATV«, scan for analogue television

channels;

Select the line »Cabel Scan Type« with »

or » «. Select the preferred option (»Quick«

or »Full«) with » « or » «.

– The search function »Quick« sets up the

channels according to the information pro-

vided by your cable provider in the trans-

mission signal.

v«

–

»ATV & DTV«, scan for analogue and

digital television channels.

Caution:

The antenna power supply (5V ) may only

be switched on if the antenna is an active

indoor antenna with a signal amplifier and it

is not already supplied with a voltage via a

mains plug (or similar supply). Otherwise

you may cause a short circuit and irrepara-

bly damage your antenna.

– If the option »Full« is selected, the entire

frequency range will be scanned. The

search can take a long time with this op-

tion. This option is recommended if your

cable provider does not support the scan

type

»Quick«.

Select the line »Active Antenna Power« with

note:

»v«

or »Λ«.

You can accelerate the search. To do this,

you need information about the frequency

and network ID. You are usually able to get

this data from your cable operator or find it

in forums on the Internet.

Switch on the antenna power supply for the

antenna with » « or » « (»On«).

Start the scan with » « (green).



– The »Search Results« menu appears, and

the search for TV channels begins.

– Depending on the number of television

channels received, this can easily take a

few minutes.

Start the scan with » « (green).



–

The »Search Results« menu appears, and

the search for TV channels begins.

– Depending on the number of television

channels received, this can easily take a

few minutes.

– The scan is complete as soon as the »PRO-

GRAM TABLE« appears.

– The scan is complete as soon as the »PRO-

GRAM TABLE« appears.

note:

You can abort the scan by pressing

»menu«.

note:

You can abort the scan by pressing

»menu«.

Press »menu« to end the setting.

note:

Press »menu« to end the setting.

note:

Before recording HD channels, please check

signal quality and Strength, see chapter

"Displaying signal information" on page 76.

If the level is displayed in green, you can

record HD channels without any problems.

Before recording HD channels, please

check signal quality and Strength, see

chapter "Displaying signal information" on

page 76. If the level is displayed in green,

you can record HD channels without any

problems.

-17

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

settinGs_{------------------------------------------------------------------------------------------------------------------------------------------}

selecting-channel-lists

Changing-the-program-table-for-

the-digital-channels

Open the menu with »menu«.

Channels which are found using the scan are

saved in the »PROGRAM TABLE«.

Select the »SOURCE SETUP« menu with »v«

or »Λ« and press »oK« to confirm.

– The »SOURCE SETUP« menu appears.

You can delete channels which are not required

from the programe table, you can change the

order of channels within the programe table and

lock individual channels (Parental control).

Select the line »Programe Table« with »v«

or »Λ« and press »oK« to confirm.

– The menu »PROGRAM TABLE« appears.

You can also add channels to the favourites list;

in addition, you can change the order of chan-

nels within the favourites list.

important:

Programe table and favourites lists are

saved separately according to the different

input sources (satellite, cable, air).

With » « (green) you can display the channels



which belong to one network.

When opening the programme table, the

respective channel list for the current input

signal appears.

Switch to the next page in the programe table

with »p+« and to the previous page with »p-«.

note:

If in the Program Table

to the name of the channel, you need a

CI module and a Smart-Card for watching

these channels.

With »

« (yellow) you can open the »LIST



appears added

MANAGEMENT« within the programe table.

In this List Management you can create your

own favourites lists.

With »

« (blue) you can sort the channels ac-



cording different criteria.

INSTALLATION

PROGRAM TABLE

Network ALL

Das Erste HD

Service

ALL

2 ZDF HD

3 arte HD

4 N24

5 Einsfestival

DTV

1 Das Erste HD

DTV

6 EinsPlus

7 arte

8 Phoenix

9 Test-R

10 ANIXE HD

DTV

11 HD 1

12 Life

13 Film

14 Promo

15 Sport1

DTV

16 TV Sport

17 Sat.8

18 SKY

19 TV6

20 TV5

DTV

Edit

Network

Add To Fav.

Sort

Exit

Back

Select Favorite

-18

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

settinGs_{------------------------------------------------------------------------------------------------------------------------------------------}

Deleting-channels

skipping-channels

In the »PROGRAM TABLE« menu, select the

Edit mode by pressing » « (red)

You can mark television channels which should

be skipped when selecting with »Λ« or »v«.



It is still possible to select them using the number

buttons.

Select the television channel to be deleted

with

«, »

» « or » « and press



In the »PROGRAM TABLE« menu, switch

(yellow) to delete.

over to the list view with » « (yellow).



note:

Select the preferred channel with »

v«

You can delete all channels with »

(blue).



or »Λ«.

Select the column »Skip« with » « or » «

Confirm the deletion process with »



and use »oK« to mark the channel.

(green);

– The channel is marked by »✔«.

cancel the deletion process with » « (red);



Quit the program table with »menu«.

note:

Channels can also be reactivated. Select the

channel with » « or » «, then select the

column »Skip« and reactivate the channel

with »oK«

Change-the-order-of-the-channels-in-

the-program-table

In the »PROGRAM TABLE« menu, select the

Edit mode by pressing » « (red)



Creating-lists-of-favourites

You can save your favourite channels in up to

four favourites lists (FAV 1 to FAV 4).

2- Select the channel which should be moved

with » «, » «, » « or » « and mark it with

» « (red).



notes:

Move the channel to its new position with

v«, »

«, » « or » « and press »oK« to

Favourites lists must be created separately

for all input sources (satellite, cable, air).

confirm.

note:

You can select the favourites list by pressing

»FAv«.

Repeat steps 2 and 3 if you would like to

change other channels.

In the »PROGRAM TABLE« menu, switch

over to the list view with » « (yellow).



Quit the program table with »menu«.

Select the channel of your choice with »

or »Λ«.

v«

sorting-channels-in-the-program-

table

You can sort the order of the channels in the pro-

gram table according different criteria: in order

of Satellite, alphabetical or in order of encryp-

tied/free channels.

“Push” the channel into the favourites

lists 1 to 4 with » « or » « and press »oK«

to confirm.

– The position in the favourites list is marked

with »✔«.

In the »PROGRAM TABLE« menu, select the

Sort mode by pressing « (blue)

– You can enter the same channel in more

than one favourite list.



2- Select the sort criteria with » « (red), »



– Each favourite list can store up to 255

channels.



(green) or

« (yellow).



Quit the program table with »menu«.

-19

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

settinGs_{------------------------------------------------------------------------------------------------------------------------------------------}

note:

enter-own-names-for-the-favourites-

lists-(max.-6-characters)

You can enter own names for all favourites lists.

Channels can also be deleted from the

favourites lists. Select the channel to be

deleted with » «, » «, » « or » « and

press »oK« to delete it.

In the »PROGRAM TABLE« menu, switch over

● ● ●

to the list view with » « (yellow).

When deleting a channel from the favourites

list, the order within the favourites list will be

updated.

Select the desired favourites list with »1« till

»4«.

– The Favorite Name screen is displayed.

Quit the program table with »menu«.

Delete the „old“ name (FAV1), for this

sorting-channels-in-the-favourite-list

You can change the order of channels in the

favourites list.

purpose select with »v«, »Λ«, » « and

» « the push button »x« and delete the

character with »oK«.

In the »PROGRAM TABLE« menu, select the

favourites list »1« to »4«.

Select the required character/numeric with

»oK«.

«, »

Λ«, » « and » « and confirm with

2- Select the channel which should be moved

with » «, » «, » « or » « and mark it with

» « (red).

Repeat the procedure for further characters/

numerics.



– Select »ABC« for uppercase and »abc«

for lower case and confirm with »oK«.

– Select »?@123« for numbers and

symbols and confirm with »oK«.

Move the channel to its new position with

v«, »Λ«, » « or » « and press »oK« to

confirm.

notes:

Confirm the new name, select the push

Repeat steps 2 and 3 if you would like to

change other channels within the same

favourites list.

button »submit« with »

v«, »Λ«, » « or

» « and confirm with »oK«.

Press »menu« to end the seting.

Repeat steps 1 to 3 if you would like to

change channels in a different favourites list.

Exit the current favourites list with »

(blue).

– The entire programe table will appear

again.



Quit the program table with »menu«.

-20

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

settinGs_{------------------------------------------------------------------------------------------------------------------------------------------}

notes:

picture-settings-

You can only select the »Mpeg NR« function

Open the menu with »menu«.

on digital and AV presets.

Select the menu item »PICTURE SETTINGS«

»Mpeg NR« reduces any interference

from artefacts (pixel blocks) from digital

programmes due to MPEG compression

(such as from DVB-T receivers or

DVD players).

The »Film Mode« detects and processes

feature films automatically for all channel

sources. This means you will always receive

an optimal picture.

This functions in the modi 480i, 576i and

1080i in TV playback and for other channel

sources.

If the »Film mode« is switched on for

programmes without a feature film signal,

minor problems such as picture freeze,

defective subtitles or fine lines in the picture

could occur.

The function »Dynamic Contrast« adapts the

contrast dynamically and optimally for the

respective picture content.

With »Dynamic Backlight«, the device

optimally adapts the background lighting to

the picture content.

The »Backlight« can only be set manually

when the function »Dynamic Backlight« is

deactivated.

»MEMC« will only appear in menus of LCD

products with 200 Hz PPR Feature and LED

products with 400 Hz PPR feature..

with »v« or »Λ« and press »oK« to confirm.

– The »PICTURE SETTINGS« menu appears.

20.09.2010

15:46

PICTURE SETTINGS

Picture Mode

Brightness

Contrast

User

100

Sharpness

Colour

Colour Temperature

Normal

Advanced Tuning

DNR

Off

MPEG NR

Exit

Back

Select the line »Picture Mode«, »Bright-

ness«, »Contrast«, »Sharpness«, »Colour«, or

»Colour Temperature« with »v« or »Λ«.

Select the value with » « or » « and press

»oK« to confirm.

notes:

When changing the values with » « or » «,

the screen will be split. You can see the

current picture value on the left side, the

new setting on the right side.

Press »menu« to end the setting.

In the »PICTURE SETTINGS« menu you can

also find other additional settings.

Select the line »DNR«, »Mpeg NR«, »Vibrant

Colour«, »Perfect Clear«, »Film Mode«,

»Gamma«, »Dynamic Contrast«, »Dynamic

Backlight«, »Backlight« or »MEMC« with

v« or »Λ«.

Select the value with » « or » « and press

»oK« to confirm.

-21

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

settinGs_{------------------------------------------------------------------------------------------------------------------------------------------}

Automatic-volume

sound-settings-

Television stations broadcast at different vol-

umes. The automatic volume limiting (AVL) func-

tion means the volume is kept the same when

you switch between channels.

Open the menu with »menu«.

Select the menu item »SOUND SETTINGS«

with »v« or »Λ« and press »oK« to confirm.

– The »SOUND SETTINGS« menu appears.

Select the line »AVL« with »

v« or »Λ« and

20.09.2010

15:46

select the option »On« with » « or » «.

SOUND SETTINGS

note:

If the »SRS TS HD« setting has been selected

in the »Audio Mode« line, the AVL line

cannot be selected.

Volume

Balance

Sound Type

Sound Mode

Stereo

SRS TS HD

Speech

stereo/two-channel-sound,-mono

If the device receives two-channel-sound pro-

grammes, e.g. a film with the original soundtrack

on audio channel B (display: »Dual II«) and

the dubbed version on sound channel A (dis-

play: »Dual I«), you can select the audio channel

you prefer.

SRS Sound Preset

External

Headphone

Audio Output Setup

Accessibility Settings

If the device receives stereo or Nicam pro-

grammes, it switches automatically to stereo

sound (display: »Stereo«).

End

Back

You can switch the sound to »Mono« if the stereo

sound quality is poor.

note:

Select the line »Audio Type« with »

v« or

Additional operations are explained in the

following sections.

»Λ

« and adjust the setting with » « or » «.

stereo-width

volume

This broadens the sound output for stereo pro-

grammes and improves the sound with mono

reception.

Select the line »Volume« with »

« or »

and change the setting with » « or » «.

Balance

Select the line »Audio Mode« with »

or » «.

v«

Select the line »Balance« with »

« or »

and change the setting with » « or » «.

Select the option »Spatial« with » « or » «.

-22

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

settinGs_{------------------------------------------------------------------------------------------------------------------------------------------}

soundeffects

equalizer

This menu offers three preset sound effects

(Music, Natural and Speech) and one setting to

be created by you (User).

Equalizer offers a sound setting ”User” that you

can create.

Equaliser appears in the menu when »Sound

mode« is selected as »Spatial« or »Normal«,

and »Sound Medium« as »User«.

Select the line »Sound Preset« with »

v« or

Λ«.

Select »Equalizer« with »v« or »Λ« and

Select the sound effect »Music«, »Natural«

or »Speech« by pressing » « or » «.

press »oK« to confirm.

The »EQUALIZER« menu appears.

note:

»User« option is active when »Sound mode«

setting is selected as »Normal or »Spatial«.

If the »SRS TS HD« setting has been selected

in the »Sound Mode« line, the »Equalizer«

line will not indicate.

srs-trusurround-HD

SRS TruSurround HD is a patented audio tech-

nology which is integrated into the television set

and only requires the built-in speakers to gener-

ate a Surround Sound effect.

Select the frequency bandwidth »120Hz«

with »v« or »Λ«.

Set the preferred value with » « or » «.

Set the next frequency bandwidth with »

or » « and repeat the setting.

v«

Select the line »Sound Mode« with »

or » «.

v«

Press » « to save the setting.

Select the option »SRS TS HD« with » « or

Audio-description-(Audio-subtitles)

» «.

Audio description is an additional audio channel

for visually-impaired persons. Descriptions are

provided of activities, surroundings, changes of

scene, gestures and actors' facial expressions.

Select the line »SRS Sound Preset« with »

v«

or »Λ«.

Select the sound effect »Music«, »Natural«

or »Speech« with » « or » «.

This audio channel is transmitted simultaneously

with the normal sound on digital channels. Avail-

ability depends on the respective channel and

broadcaster.

Select the line »Audio Description« with »

or »Λ

« and select the option »On« with » «

or » «.

Select the line »Volume« with »

« or »

and change the volume with » « or » «.

exiting-the-setting

Press »menu« to end the setting.

* Under licence from SRS Labs, Inc. TruSurround HD,

SRS and the

symbol are trademarks of

SRS Labs, Inc.

-23

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

television---operAtion_{--------------------------------------------------------------------------------}

Displaying-information

Basic-functions

1- Display information, press »?« repeatedly.

– The display disappears automatically after

a short while.

switching-on-and-off

Press »8«, »1…0« or »p+« or »p-« to switch

on the television from standby mode.

Freeze-frame

Press »8« to switch the television to standby.

If you wish to view a particular scene for longer,

you can “freeze” the frame of the current pro-

gramme.

selecting-channels

Press »1…0« to select presets directly.

Activate the freeze-frame function with »$«.

End the freeze-frame function with »$«.

note:

Select channels step by step with »p+« or

»p-«.

3- Open the channel list with »oK«, select the

preferred television channel with » «, » «,

» « or » « and press »oK« to confirm.

If an external data medium is connected

to the television, the time shift function is

activated with »$«. The time shift function is

described on page 41.

Exit the channel list with »menu«.

selecting-channels-from-lists

You can select channels from various lists (e.g.

all channels, FAV 1 to FAV 4).

picture-settings

Various picture settings are available.

Press »FAv« to open an overview of pro-

grame tables.

Open the Tools menu with »tools«.

Select the menu item »Picture Mode« with

– The overview is displayed.

»v« or »Λ«.

Select a channel list with »

Λ« or »v« and

3- Select »User«, »Eco TV«, »Vivid«, »Natural«,

»Movie«, »Sports« or »Game« by pressing

» « or » «.

open it with »oK«

Select a television channel with »

«, »Λ«,

» « or » « and press »oK« to confirm.

– You can change the »User« picture setting;

see “Picture settings” on page 21.

Press »menu« to exit the channel list.

note:

selecting-a-preset-Av-channel

Picture setting »Game« can only be selected

in »HDMI«, »Component« and »PC« modes.

Open the »Select Source« menu with »

Select an AV preset with » «, »

» « and press »oK« to confirm.

«.

Λ«, » « or

Use »1…0« to switch back to the television

channel.

Adjusting-the-volume

Adjust the volume with »

«.

- -–

switching-sound-on/off

Press » « to mute the sound or switch it

on again.

-24

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

television---operAtion_{--------------------------------------------------------------------------------}

Audio-settings

Various audio settings are available.

Zoom-function

This function allows you to enlarge the picture

as required.

Open the Tools menu with »tools«.

Select the menu item »Sound Preset« with

»v« or »Λ«.

Select the menu item »Zoom« with »v« or

»Λ«.

Select the audio setting »User«, »Music«,

»Natural« or »Speech« by pressing » « or

3- Press- »oK« repeatedly to enlarge the

» «.

display in three steps.

– You can change the »User« audio setting

– see the “Soundeffects” chapter on page

23.

eco-mode

This function allows you to reduce the power

consumption.

note:

»User« option is active when »Sound mode«

setting is selected as »Normal or »Spatial«.

Open the Tools menu with »tools«.

Select the menu item »Eco TV« with »v« or

»Λ«.

Audio-language

Various languages are available on digital tele-

vision channels. This depends on the programme

being broadcast.

3- Switch on the Eco mode with » « or » «.

Switch the Eco mode off again with » « or

» «.

Open the selection menu with »

«.

Select the language by pressing »

and press »oK« to confirm.

« or »Λ«

subtitles

Various subtitles are available on digital televi-

sion channels. This depends on the programme

being broadcast.

Open the selection menu with » «.

Select the subtitles with »v« or »Λ« and

press »oK« to confirm.

-25

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

television---operAtion_{--------------------------------------------------------------------------------}

Zapping-function

This function remembers the channel you are

currently watching while you switch over to other

ones (zapping).

electronic-tv-guide

The electronic TV guide provides an overview of

all programmes that will be broadcast in the next

week (for digital channels only).

Press »1…0« or »p+«, »p–« to select the

Press »GuiDe« to display channel informa-

channel to be stored in the zapping memory

tion.

and press » « to confirm.

notes:

Press »1…0« or »

Λ«, »v« to switch to

Not all channels supply provide a detailed

another television channel.

TV guide.

Many broadcasters transmit the current

Press » « to switch between the saved tel-

schedule, but do not offer detailed descrip-

tions.

evision channel and the last television chan-

nel viewed.

There are broadcasters which do not pro-

vide any information at all.

4- End the function with »menu«.

Press »

v« or »Λ« to select a television

channel.

– Today's programmes on the television

channel selected are displayed.

Switch to the information about the current

programme with » «.

notes:

You can open and switch off the extensive

programme information with »?«.

You can can added the selected broadcast

to the memory timer by pressing »oK«

Press »

« to select information on the next

programme and, »

« to return to the infor-

mation for the current programme.

Select programmes on over the coming days

with » « (green), and switch back to the cur-



rent day with » « (red).



Switch back to the channel selection with

» «.

note:

Filter for certain programmes with »



(blue), select the channel type with » «,

» «, »v« or »Λ« and press »oK« to con-

firm. Programmes which match the selected

channel type are displayed.

7- Quit the electronic TV guide with »menu«.

-26

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

television---operAtion_{--------------------------------------------------------------------------------}

»panorama«-format-

Changing-the-picture-format

This setting is suitable for films in an especially

wide format.

The television automatically switches to the 16:9

format if this format is detected via the SCART

socket.

During programmes in 4:3 format, the picture is

stretched horizontally if the »Panorama« function

is selected. The picture geometry is stretched

horizontally.

Open the Tools menu with »tools«.

Select the menu item »Picture Format« with

v« or »Λ« and press »oK« to confirm.

Select the picture format with » « or » « and

»overscan-off«-format

press »oK« to confirm.

In this mode, HD pictures are not cropped by the

HDMI sockets or component sockets, and are

displayed in their original size. This only applies

in HDMI mode and for resolutions of 720p or

above.

– You can choose between the following

picture formats:

»Auto«-format

The picture format is automatically switched to

»16:9« for 16:9 programmes.

The picture format is automatically switched to

»4:3« for 4:3 programmes.

»16:9«-and-»14:9«-formats

For programmes in 4:3 format, the picture is

stretched horizontally if the »16:9« format or

»14:9« format is selected.

The picture geometry is stretched horizontally.

With actual 16:9 input sources (from a set-

top box on the SCART socket) the picture fills

the screen completely and with the correct

geometry.

»4:3«-format

The picture is shown in 4:3 format.

»letterBox«-format-

The letterbox format is especially suitable for

programmes in 16:9 format.

The black borders which are usually at the top

and bottom of the screen are eliminated, 4:3 pic-

tures fill the screen.

The transmitted pictures are enlarged, but are

slightly cropped at the top and bottom. The pic-

ture geometry remains unchanged.

»subtitle«-format

If you cannot see the subtitles at the bottom of

the screen, select »Subtitle«.

-27

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

smArt-inter@Ctive-tv-AnD-Home-networK_-

what-is-smart-inter@ctive-tv

Smart Inter@ctive TV provides your television

with internet services and pages when con-

nected to internet.

wired-network

wired-network-connection

Connect the output of external modem to the

»lAn« socket with Cat 5 cable.

Through Interactive TV feature you can run many

local and global internet applications. These

applications include video, picture and music

applications, social networks, news and sports,

weather applications and doctor or pharmacy

search, recipes and viewing traffic congestions

depending on your local city.

Also, you can listen to online radio.

Your TV supports remote control feature for

Apple iPhones and Android phones. Depending

on the features of your TV, you may control your

TV by your phone after downloading the free

»GRUNDIG TV Remote« application from Apple

App. Store or Android Market and install it on

the Apple iPhone/Android phone.

The availability of the applications and the con-

tent is dependent on the content provider.

note:

Connection cables are not supplied.

network-connection

You can establish a wired or wireless connection

between your television and the local network.

If you want use a wired network connection,

start with the instructions on this page;

if you use a wireless network connection, follow

the instructions in section "Wireless network", on

page 32.

-28

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

smArt-inter@Ctive-tv-AnD-Home-networK_-

Select »Connection Type« with »

« or »

wired-network-settings

There are two ways of making the wired network

settings.

and then select »Wired« with » « or » «.

Select »Network Configuration« with »

« or

»Λ« and then select »AUTO« with » « or » «.

Automatic wired network connection,

all connection settings (»IP Address«, »Net-

mask«, »Gateway« and »DNS«) are ob-

tained from modem automatically.

Start the registration to the home network by

pressing » « (red).



– The mesage »Connecting ... Please Wait«

appears.

Manual wired network connection,

all connection settings (»IP Address«, »Net-

mask«, »Gateway« and »DNS«) must be

configured manually.

Press » « (green) to make sure that the



network connection is established with the

current settings.

– The messages »Testing ... Please Wait«

appears, after successfull announcement

the messages »Connecting To Gateway:

Success« and »Internet Connection:

Success«.

Automatic-wired-network--

connection

Most of the home networks are Dynamic. If

you have a dynamic network, you must use a

DSL modem that supports DHCP. A Television

connected to the same network with a Modem

or IP sharer that support DHCP obtains the

»DNS« values that are required for »IP Address«,

»Netmask«, »Gateway« and internet access

automatically, and thus you are not required to

enter those values manually.

Press »menu« to end the setting.

note:

If you do not have a dynamic network,

follow the instructions in manual connection

section.

Open the menu with »menu«.

Select the line »INTER@CTIVE TV« with »

v«

or »Λ« and press »oK« to confirm.

– The »INTER@CTIVE TV« menu appears.

dd.mm.yyyy

hh:mm

INTER@CTIVE TV

inter@ctive Applications

Network Settings

Wired

Connection Type

AUTO

Network Configuration

IP Address

10.134.151.15

10.134.150.8

255.255.255.0

DNS

Netmask

Gateway

MAC Address

10.134.151.254

E1:DF:BF:92:00:11

Connect

Exit

Test Connection

Back

-29

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

smArt-inter@Ctive-tv-AnD-Home-networK_-

Select »Netmask« with »

Enter the Netmask with »1…0« and press

« (green) to save the value.

v« and press »oK«.

manual-connection

Certain networks require Static IP address. If your

network requires a Static IP address, you must

enter the »IP Address«, »Netmask«, »Gateway«

and »DNS« values manually. You can obtain

your »IP Address«, »Netmask«, »Gateway«

and »DNS« values from your Internet Service

Provider (ISP).



Select »Gateway« with »

Enter the Gateway with »1…0« and press

« (green) to save the value.

v« and press »oK«.



Start the registration to the home network by

pressing » « (red).



Open the menu with »menu«.

– The mesage »Connecting ... Please Wait«

appears.

Select the line »INTER@CTIVE TV« with »

or »Λ« and press »oK« to confirm.

10 Press » « (green) to make sure that the



– The »INTER@CTIVE TV« menu appears.

Select »Connection Type« with » « or »

and then select »Wired« with » « or » «.

network connection is established with the

current settings.

Λ«

– The messages »Testing ... Please Wait«

appears, after successfull announcement

the messages »Connecting To Gateway:

Success« and »Internet Connection:

Success«.

Select »Network Configuration« with »

« or

Λ« and then select »Manual« with » « or

» «.

– »IP Address«, »Netmask«, »Gateway« and

»DNS« options are active.

11 Press »menu« to end the setting.

dd.mm.yyyy

hh:mm

INTER@CTIVE TV

inter@ctive Applications

Network Settings

Wired

Connection Type

Manual

Network Configuration

IP Address

10.134.151.15

10.134.150.8

255.255.255.0

DNS

Netmask

Gateway

MAC Address

10.134.151.254

E1:DF:BF:92:00:11

Connect

Exit

Test Connection

Back

Select»IPAddress«with»v«and press»oK«.

Enter the IP address with »1…0« and press

« (green) to save the value.



Select »DNS« with »

EntertheDNSaddresswith»1…0«andpress

« (green) to save the value.

v« and press »oK«.



-30

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

smArt-inter@Ctive-tv-AnD-Home-networK_-

notes:

wireless-network-connection

The GRUNDIG Wireless WiFi Adapter sup-

ports IEEE 802.11 B/G and N communica-

tion protocols. We recommend you to use

IEEE 802.11N protocol to obtain the best

performance in HD video playback.

If you use a modem that supports IEEE 802.

11B/G, video playback performance may

be poor when compared to a modem that

supports IEEE 802.11N since the data

transfer rate of IEEE 802.11B/G protocol

is lower.

Please note that video playback performance

in a DLNA application on a wireless local net-

work and in a smart Inter@ctive TV applica-

tion on a network with internet connection de-

pends on the number of users on the network

as it is the case in every wireless network.

Television includes a built-in Wireless WiFi

Adapter to connect it to wireless network.

It is recommended to switch off the equip-

ment that are not in use in home network in

order to avoid unnecessary network traffic.

note:

Apart from the built-in WiFi adapter on TV,

external WiFi adapter can be connected to

Placing the modem or wireless network shar-

er on an elevated location will increase the

wireless connection reception strength.

»usB1« and »usB2-(HDD)« inputs.

Wireless connection reception strength may

vary depending on the type of the modem,

the distance between the modem and televi-

sion and the distance between the device

used as a DMS for DLNA application and

the modem.

Modem must be transmitting its SSID in order

to establish a wireless connection. Television

can not connect to a network without SSID.

-31

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

smArt-inter@Ctive-tv-AnD-Home-networK_-

Select »Network Configuration« with »

v« or

wireless-network-settings

There are two ways of making the wireless net-

work settings.

»Λ

« and then select »AUTO« with » « or » «.

Select »Select Access Point« with »

v« or

»Λ

« and confirm with »oK«

Automatic connection,

– »Select Access Point« menu appears and

available wireless networks are scanned

and displayed in the menu

»Apart from Access Point Selection, all data

regarding the connection settings (»IP Ad-

dress«, »Netmask«, »Gateway« and »DNS«)

are obtained from modem automatically.

Select the network that you want to connect

with »

v«, »Λ«, » « or » « and confirm with

Manual connection,

»oK«

all connection settings (»IP Address«,

»Netmask«, »Gateway« and »DNS«) must

be configured manually.

– Wireless connection password screen is

displayed.

Select the required character with »

v«, »Λ«,

Automatic-connection

» « and » « and move to the next character

Most of the home networks are Dynamic. If you

have a dynamic network, you must use a DSL

modem that supports DHCP. Modems and IP

sharers that support DHCP obtain the »DNS«

values that are required for »IP Address«,

»Netmask«, »Gateway« and internet access

automatically, and thus you are not required to

enter those values manually.

with »oK«

– Select »ABC« for uppercase and »abc«

for lower case and confirm with »oK«

– Select »?@123« for numbers and symbols

and confirm with »oK«

– Enter the password, select »Confirm« with

«, » «, » « or » « and confirm with

»oK«

note:

»v

Open the menu with »menu«.

In WEP encryption system, more than one

network password can be assigned for the

network. Your television can only connect to

network with level 1 password.

Select the line »INTER@CTIVE TV« with »

v«

or »Λ« and press »oK« to confirm.

– The »INTER@CTIVE TV« menu appears.

dd.mm.yyyy

hh:mm

Start the registration to the home network by

INTER@CTIVE TV

pressing » « (red).



– The mesage »Connecting ... Please Wait«

appears.

inter@ctive Applications

Press » « (green) to make sure that the



Network Settings

network connection is established with the

current settings.

– The messages »Testing ... Please Wait«

appears, after successfull announcement

the messages »Connecting To Gateway:

Success« and »Internet Connection:

Success«.

Wireless

Connection Type

N/A

Select Access Point

Network Configuration

AUTO

10.134.151.15

10.134.150.8

IP Address

DNS

255.255.255.0

10.134.151.254

Netmask

Gateway

10 Press »menu« to end the setting.

note:

Connect

Exit

Back

If you do not have a dynamic network,

Test Connection

follow the instructions in manual connection

section.

Select »Connection Type« with »

v« or »Λ«

and then select »Wireless« with » « or » «.

-32

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

smArt-inter@Ctive-tv-AnD-Home-networK_-

Select »Network Configuration« with »v« or

manual-connection

Λ« and then select »Manual« with » « or

Certain networks require Static IP address. If

your network requires a Static IP address, you

must enter the »IP Address«, »Netmask«, »Gate-

way« and »DNS« values manually. You can ob-

tain your »IP Address«, »Netmask«, »Gateway«

and »DNS« values from your Internet Service

Provider (ISP).

» «. »IP Address«, »Netmask«, »Gateway«

and »DNS« options are active.

Select»IPAddress«with»

Enter the IP address with »1…0« and press

« (green) to save the value.

v«andpress»oK«.



Select »DNS« with »

EntertheDNSaddresswith»1…0«andpress

« (green) to save the value.

v« and press »oK«.

Open the menu with »menu«.



10 Select »Netmask« with »

Enter the Netmask with »1…0« and press

« (green) to save the value.

Select the line »INTER@CTIVE TV« with »

v«

or »Λ« and press »oK« to confirm.

v« and press »oK«.

– The »INTER@CTIVE TV« menu appears.

Select »Connection Type« with » « or »

Λ«

« or



11 Select »Gateway« with »

Enter the Gateway with »1…0« and press

« (green) to save the value.

and then select »Wireless« with » « or » «.

v« and press »oK«.

Select »Select Access Point« with »

»Λ« and confirm with »oK«.



– »Select Access Point« menu appears and

available wireless networks are scanned

and displayed in the menu

12 Start the registration to the home network by

pressing » « (red).



– The mesage »Connecting ... Please Wait«

appears.

Select the network that you want to connect

with »

v«, »Λ«, » « or » « and confirm with

13 Press » « (green) to make sure that the



»oK«

network connection is established with the

current settings.

– Wireless connection password screen is

displayed.

– The messages »Testing ... Please Wait«

appears, after successfull announcement

the messages »Connecting To Gateway:

Success« and »Internet Connection:

Success«.

Select the required character with »

v«, »Λ«,

» « and » « and move to the next character

with »oK«

– Select »ABC« for uppercase and »abc«

for lower case and confirm with »oK«

– Select »?@123« for numbers and symbols

and confirm with »oK«

– Enter the password, select »Confirm« with

«, » «, » « or » « and confirm with

»oK«

notes:

14 Press »menu« to end the setting.

»v

In WEP encryption system, more than one

network password can be assigned for the

network. Your television can only connect to

network with level 1 password.

For TV to discover the wireless modem on

the network, the network name should

support ASCII characters.

-33

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

smArt-inter@Ctive-tv-AnD-Home-networK_-

selecting-internet-applications

smart-inter@ctive-tv-internet-

applications

Smart Inter@active TV applications provide inter-

net services to your television. These applications

are designed according to your television.

Open the menu »SMART inter@ctive TV«

with »@«.

With the Smart Inter@active TV feature you can

access many local and global internet applica-

tions. These applications include video, picture

and music applications, social networks, news

and sports, weather applications and doctor or

pharmacy search, recipes and viewing traffic

congestions depending on your local city.

KATEGORIE

Selected Application

All

Aplication information

Social&Fun

Health&Life

News&Video

Press OK to Enter

Exit

Back

KATEGORIE

You can listen to online radios and access many

other entertaining information.

Select the application with »v«, »Λ«, » «

and » « and press »oK« to confirm. The

notes:

Availability of Smart Inter@active TV

applications are dependent on the country.

selected application will be started.

notes:

Interactive TV internet applications cannot

You can advise the applications also by

categories, press » « (blue) and select

download and save files, cannot upload

files to a web site and cannot install add-ins

except Login pages of some applications.



v« or »Λ« the categorie and confirm

with »

with »oK«

Under no circumstances, Grundig is

responsible for the content and the quality

of content offered by the content providers.

If you attempt to start an application without

wire or wireless adapter connected, the

related warning is displayed on the screen.

If your wire or wireless adaptor is connected

but you cannot receive IP or internet is

not connected, the applications cannot

be started. In this case, check Network

connection settings. See page 31 or

34.

Grundig has made special agreements

with the application owners which have a

limited duration. Application owners may

update, modify, restrict or entirely remove

those applications with their own decision.

Grundig cannot be held responsible for

such changes.

Grundig reserves the right to make all

changes such as modifications, restrictions,

extensions, transfers and removals on

internet applications provided through your

Smart Inter@ctive TV.

In Login process of some applications,

it may be required to connect to the web

page of the related application. Subject

web pages may contain links not related to

TV may access open web and view contents

that are not supported by your TV. As you

are on open web, your TV cannot control

those unsupported contents or cannot be

held responsible for them.

-34

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

smArt-inter@Ctive-tv-AnD-Home-networK_-

smart-İnter@ctive-browser-main-menu

Application gallery

Selected applications

Description of the

application

KATEGORIE

All

Selected Application

Live picture from the

current TV channel

Aplication information

Social&Fun

Health&Life

News&Video

Submenü for selecting

the different categories.

Press OK to Enter

Exit

KATEGORIE

Back

navigation-in-the-main-menu

playing-and-other-options-in-the-

applications

note:

Select the desired application with »

v«,

»Λ

«, » « and » « and press »oK« to con-

firm.

Some applications do not support all

– The main menu of the application appears

after a short time.

playing options, and playing options may

vary among different applications.

note:

»⁸« starts playback in the applications.

»^!« pauses playback in the applications.

»⁷« stops playback in the applications.

You can advise the applications also by

categories, press »

with »

with »oK«

« (blue) and select



v« or »Λ« the categorie and confirm

Press »3« or »4« during playback, select

different speed backwards and forwards.

The further using is dependent of the struc-

ture from the application. See the notes on

the screen.

Press »5« or »6« during playback, selects

the previous or the next section.

6- Press-»Λ«, »v«, » «, » « to slide the screen

up and down, left and right in the virtual key-

board and applications.

7- Press-»oK« to confirm the selections in

virtual keyboard and applications.

8- Press-»1…0«, » « (red), » « (green),





« (yellow), »

« (blue) to select/





enable various functions in the applications.

Press »@« to end the application.

-35

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

smArt-inter@Ctive-tv-AnD-Home-networK_-

Press »

« (blue) to discover DMS



playback-the-video,-music-and-

image-files-with-home-network-

connection

devices on home network.

– DMS devices that are discovered appears

in the menu.

With DLNA menu of your television, you can

easily access Video, music and photo files on

server; and thanks to DMR feature, you can au-

tomatically start and stop media playing on de-

vices with DMC feature.

note:

If no DMS device appears, check the

network connection. See page 31 or 34.

Select the desired DMC device with »

«, »

«,

» « or » « and display its content with »oK«

notes:

You can share your videos, music or

notes:

photographs via devices such as a PC,

Mobile Phone or NAS (Network Attached

Storage) functioning as a DLNA compatible

DMS (Digital Media Server).

File and folder structure of the DMS device

in menu may vary depending on the Digital

Media Server software in use.

Subtitles are not supported on video files

that are played through the DMS device.

If the DMS device and the television are

connected to the wireless network at the

same time, laggings or freezing can arise

during video playback.

Only the formats with a DLNA certificate

(»MPEG_PS_NTSC«,

»MPEG_PS_PAL«,

»MPEG_TS_SD_EU« and »MPEG_TS_EU_

ISO«) are supported from among the video

files played from DMS device.

TV can also operate with DMS software

installed in the computer, however, a full

compatible operation with software without

DMS certificate is not guaranteed.

With high bitrate videos, distortion can be

seen.

When you are using a PC with Windows

Folders that appear as unknown in DLNA

application cannot be played by the TV.

Installing the codec to your computer can

solve this problem.

OS, you can configure the Windows Media

Player (from version 11) as Digital Media

Server.

The required settings are related to the

software version.

Only the formats with a DLNA certificate

(»AAC_ADTS_320«, »LPCM«, »MP3«,

»WMABASE« and »WMAFULL«) are

supported from among the audio files

played from DMS device.

select-the-Digital-media-server

Open the menu »SMART inter@ctive TV«

with »@«.

Only the formats with a DLNA certificate

(»JPEG_LRG«, »JPEG_MED« and »JPEG_

SM«) are supported from among the picture

files played from DMS device.

Select the option »dlna« with »

v«, »Λ«,

» « or » « and confirm with »oK«

– »dlna« menu is displayed.

Device Found

Page: 1/1

Press BLUE key to search DMS device.

-36

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

smArt-inter@Ctive-tv-AnD-Home-networK_-

start-playback

vtuner-internet-radio

In the content of the DMC device select the

Many radio stations broadcast through the inter-

net. vTuner allows you to access many popular

radio stations on earth. Thanks to the vTuner

function of your television, you can display a

list that contains many radio stations, and select

and listen to the desired stations based on your

tastes.

required folder with »v«, »Λ«, » « or » «

and confirm with »oK«

– All titels appears.

Select the required title with »

«, »

«, » «

or » «.

Start playback with »⁸«.

note:

Internet connection is required to use vTuner

function.

other-playback-functions

Press »!« to pause playback.

Open the menu »SMART inter@ctive TV«

Press »⁸« to resume playback.

with »@«.

Press »5« or »6« repeatedly until the

desired file is reached.

Select »vTuner« with »

«, »

«, » « or » «

and confirm with »oK«

– »Internet Radio« menu is displayed.

Press »⁷« to stop playback.

Press » « to return to the DMS list page.

VTuner

1/6

Favorites

Press »GuiDe« to exit the DLNA function.

Added Stations

Location

note:

Genre

New Stations

Most Popular Stations

This playback functions and others you can

also select with the function menu:

»FAv« opens/closes playback functions menu;

»⁸« starts playback;

Exit

Back

»^!« pause playback;

»⁷« stop playback;

Select the required category with »

« or

Λ« and display its content with oK«.

3« and »4« search for a passage;

« select the repeat function;

« select the playlist;

– »Select radio station with »v« or »Λ« and

press »oK« or »8«.

– Press »⁷« to end playback.

« displaying title informations.

note:

Sequence and the names of files and folders

in vTuner menu is updated by the vTuner

server. Thus, it may vary.

Press » « to return to the previous catego-

ry.

Press »GuiDe« to exit the vTuner function.

-37

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-reCorDinG_{---------------------------------------------------------------------------------------------------------------}

possible-limitations-when-using-

an-external-data-medium

Depending on the broadcaster, you may experi-

ence various restrictions on some of the functions

from some television channels.

information-on-recording-and-

playing-television-programmes

Recording and playback of television pro-

grammes is only possible with digital television

channels (DVB-S, DVB-T and DVB-C).

■

The digital television channels (DVB-S, DVB-T

and DVB-C) you are able to record and play-

back also depends on the broadcaster.

GrunDiG-has-no-influence-on--

these-restrictions.

■

Recording a programme on the external data

■

Recording and playback of programmes,

medium can be disabled by the broadcaster.

If the message »URI* protected! PVR function

is blocked« appears on the screen, then re-

cording or timeshift is restricted (one recording

possible) or disabled (recording not possible)

by the broadcaster.

as well as the time shift function, can only be

carried out using an external data medium

(hard drive or USB stick). The data medium

should have a minimum storage capacity

of 2 GB.

* URI = User right information (Copyright in-

formation).

■

Recordings can be made with most data media

on the market. However, we cannot guarantee

operation for all data media.

■

If you record and save a programme on the

archive of an external data medium, playback

can be restricted.

The broadcaster can allow you to view this

programme one or more times, but it may only

be available for a certain period of time.

■

If a programme was recorded on an external

data medium, it can only be played back on

your television set. The playback of these pro-

grammes is not possible on other devices.

■

If you send your television to be repaired and

■

Programmes not suitable for minors will require

hardware components need to be replaced,

you might not be able to play the recordings

again on the repaired television.

the input of a PIN number immediately before

recording starts. If this authorisation is not

given, the recording may not start.

■

Reception for SKY broadcasting service is cur-

rently only possible in Germany with a suitable

set-top box or suitable CA module.

■

Copying a programme from a digital television

channel onto a video or DVD recorder using

the »Av- 1« socket (analogue picture/

sound signal) can also be restricted by the

broadcaster. Prerequisite is that your device

supports the copying function.

■

Grundig does not accept liability for any loss

of saved data on an external data medium.

-38

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-reCorDinG_{---------------------------------------------------------------------------------------------------------------}

notes:

Connecting-external-data-media-

notes:

The »usB1« socket of the television sup-

plies a maximum power of 500 mA in ac-

cordance with USB specifications. External

hard disks which require more power may

therefore only be connected to the »usB2-

(HDD)« of the television.

Before connecting the data medium, switch

the television to standby with . Connect

»8«

the device and then switch the television on

again.

Before removing the external data medium,

the television must be switched to standby,

so that no data loss occurs.

If you use a network cable for external hard

disks which have been connected to the

»usB2-(HDD)« socket of the television, this

network cable must also be disconnected

from the power supply when the television is

switched off.

Your television features two USB sockets,

»usB1« and »usB2-(HDD)«.

»usB2-(HDD)«isusedtoconnectdatamedia,

which require an additional power supply

– for example, external hard disks.

External data media may not be disconnect-

ed from the television while files on the data

medium are being accessed.

settings-for-usB-recording

selecting-the-menu

Open the menu with »menu«.

Select the line »USB RECORDING« with

v« or »Λ« and press »oK« to confirm.

– The »USB RECORDING« menu appears.

20.09.2010

15:46

USB RECORDING

PRnP

Auto Preview

Connect the »usB2-(HDD)« socket of the

television and the corresponding socket of

the data medium (external hard disk) using

a USB cable;

Manage data medium

Safely Remove Disk

Disk

USB

Partition

Capacity Used

1249

Used (MB)

insert the USB plug of the USB memory stick

into the »usB1« socket of the television.

Total (MB)

38145

Remaining SD recording time

Remaining HD recording time

1,008 min

288 min

Confirm the display »

(green).

– The file browser appears.

« with »



Exit

Back

-39

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-reCorDinG_{---------------------------------------------------------------------------------------------------------------}

switching-on-automatic-preview

testing-the-external-data-medium

If the automatic preview is switched on, a pre-

view of the selected file appears in the file

browser.

You can subject external data media to a test

and establish whether they are suitable for the

chosen functionality.

Select the line »Auto Preview« with »

«.

v« or

Select the line »Disk« with »v« or »Λ«. If

»Λ

several data media are connected, select the

preferred data medium with » « or » «.

Switch on the function with » « or » «

« or »

(»On«).

Select the line »Partition« with »

Λ«.

If several partitions are available, select the

partition you wish to use with » « or » «.

Press »menu« to end the setting.

safely-remove-disk

Select the line »Check Disk« with »

« or

Select the line »Safely Remove Disk« with

« or » « and press »oK« to confirm.

Λ« and press »oK« to confirm.

Information on the data medium is dis-

played.

»v

–

note:

The disk can now be removed from the

socket.

Press »menu« to end the setting.

selecting-external-data-media

If several external data media are connected to

the television, you can select the preferred data

medium.

Select the line »Disk« with »v« or »Λ«

Select the preferred data medium with » «

or » «.

Press »menu« to end the setting.

selecting-a-partition-on-the-external-

data-medium

If the external data medium features several par-

titions, select the partition you would like to use.

Select the line »Partition« with »v« or »Λ«.

Select the partition you wish to use with » «

or » «.

Press »menu« to end the setting.

-40

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-reCorDinG_{---------------------------------------------------------------------------------------------------------------}

″pausing”-time-shift--

programmes

You can pause the programme you are watch-

ing. This is a useful function, for example if the

telephone rings while you are watching a film

and you do not want to miss anything.

recording-programmes

You can record programmes. The data for these

programmes is recorded on an external data

medium and this archive is administered via the

television.

You need 44 MB till 110 MB of memory

capacity on the external data medium for

1 minute recording time.

A freeze-frame display of the last scene appears

on the screen and the programme is recorded

in the time shift memory of the external data

medium.

While recording, you can watch another pro-

gramme from the archive.

In time shift mode you can record a maximum of

20 minutes of the current programme.

You cannot change presets.

one-touch-programme-recording

Press »^!« to pause the current programme.

– The picture is frozen, the time shift and the

remaining recording time are displayed.

Select the television channel to be recorded

with » »1…0« or »p+«, »p–« and press

« to start the recording.

Press »⁸« to resume the programme.

– Information on the recording is displayed:

the recording symbol, the channel name,

the programme, the recording time and the

available memory space.

– After a short time this information disap-

pears.

–

The programme will continue to be

recorded.

note:

The following functions are possible when in

time shift mode:

– Rewind, press »3« several times accord-

ing to speed (the picture freezes while

rewinding);

– Fast forward, press »4« several times

according to speed;

– Select pause with »!«.

End the recording with »⁷«.

Confirm the display with » « (green);



press » « (red) to continue the recording.



notes:

Press »⁷« to quit the time shift function.

– The message »Live programme« appears,

and you will see the current programme

without time shift.

– The scenes in the “time shift memory” are

deleted.

After the recording is complete, the record-

ing will be automatically saved on the exter-

nal data medium.

The »RECORDED FILES« menu, with the ar-

chived programmes, can be opened with

»reC.list«.

If the external data medium is disconnected

from the USB socket during recording, the

recording will be stopped automatically

and will not be saved.

Play your recordings, that you have record-

ed with your FAT32 formatted HDDs, in USB

mode.

-41

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-reCorDinG_{---------------------------------------------------------------------------------------------------------------}

recording-a-programme-from-the-

channel-list

presetting-programmes-to-be-

recorded

Open the »CHANNEL LIST« with »oK«

Select a television channel with » «, »

» « or » « and press »oK« to confirm.

...-using-the-electronic-tv-guide

You can use data from the electronic TV guide

for recording.

Λ«,

Press »menu« to exit the channel list.

25 programmes can be preset for the timer

recording or as a reminder.

Press » « to start recording.

– Information on the recording is displayed:

the recording symbol, the channel name,

the programme, the recording time and the

available memory space.

– After a short time this information disap-

pears.

Press »GuiDe« to display channel informa-

tion.

– The electronic TV guide appears.

Select the preferred channel with »

v«

or »Λ«.

Switch to the information about the current

Press »⁷« to stop recording.

programme with » «.

Confirm the display with » « (green);



Select the programme of your choice with

v« or »Λ«.

press » « (red) to continue the recording.



Confirm the programme with »

«.

– The symbol » « appears after the name

of the programme, and the data has been

added to the timer.

note:

If the data for the recording is to be changed,

use

« (yellow) and



« (blue) to



switch to the »SCHEDULED EVENTS«, press

«(green),changethedataandsaveitwith



« (green)

Press »menu« to exit the menu.

notes:

Before the timer recording begins, a warn-

ing message appears with a 20-second

countdown. You can switch over to the pro-

grammed television channel.

If the timer recording starts during playback,

playback is not interrupted: Recording takes

place automatically in the background as

long as you do not select »Yes« when the

timer countdown message is shown.

-42

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-reCorDinG_{---------------------------------------------------------------------------------------------------------------}

...-by-manual-data-entry

You can preset up to 25 programmes for timer

recording.

editing-recording-data-in-the--

timer-menu

You can edit the data for programmed timer

recordings.

Press »GuiDe« to display channel informa-

tion.

– The electronic TV guide appears.

Select the timer menu by pressing »GuiDe«

 

sion.

« (yellow) and « (blue) in succes-

Open the »MAKE SCHEDULE« menu by

– The »SCHEDULED EVENTS« menu ap-

pears.

pressing » « (yellow) twice.



Select the line »Type« with »v« or »Λ«

Select the title of the programme to be

and select the option »Recording« with » «

changed with »

v« or »Λ« and activate the

or » «.

timer position with

« (green).



Select the line »Channel« with »

« or »

– The input menu is displayed.

and select the channel with » « or » «.

Select the required option with »

« and edit the data with »1…0« and

» « or » «.

v« or

Select the line »Mode« with »v« or »Λ« and

»Λ

select the preferred mode (»Once«, »Every

Day« or »Weekly«) with » « or » «.

4- Save the changes with » « (green).



Select the line »Start« (Start recording) with

« or » « and enter the date/time with

»1…0«.

– The timer has been changed.

Press »menu« to close the menu.

Deleting-recording-data-in-the-timer-

You can delete the data for programmed timer

recordings.

Select the line »End« (Stop recording) with

« or » « and enter the date/time with

»1…0«.

»v

8- Save the data with » « (green).



Select the timer menu by pressing »GuiDe«

 

sion.

– The programme is preset.

« (yellow) and « (blue) in succes-

Press »menu« to exit the menu.

notes:

Before the timer recording begins, a warn-

– The »SCHEDULED EVENTS« menu ap-

pears.

ing message appears with a 20-second

countdown. You can switch over to the pro-

grammed television channel.

Select the title of the programme to be deleted

with »

with

v« or »

Λ« and delete the timer position

« (yellow)



If the timer recording starts during playback,

Press »menu« to close the menu.

playback is not interrupted: recording takes

place automatically in the background as

long as you do not select »Yes« when the

timer countdown message is shown.

-43

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-reCorDinG_{---------------------------------------------------------------------------------------------------------------}

playback

The recorded programmes – whether started

playback-during-a-recording

During a recording, you can either watch the

manually or using the timer function – are stored

programme you are currently recording or watch

on the external data medium. You can open the

a different one that you have already recorded.

archive on the external data medium by pressing

Select the channel to be recorded with

»1…0« or »p+«, »p–« and press »

start the recording.

»reC.list«.

« to

selecting-a-programme-from--

the-archive

Select the »Recorded Event« menu by press-

ing »reC.list«.

Open the »Recorded Event« menu with

»reC.list«

3- Select the programme you want with »

« or

– The menu appears.

« and press »8« to start playback.

Select the programme of your choice with

–

The recording continues in the background.

v« or »Λ« and start playback with »8«.

Press »7« to end playback.

Press »⁷« to end playback.

– The television switches over to the current

television channel.

Press »⁷« to stop recording.

Deleting-programmes-in-the-

recording-list

You can delete programmes from the record-

ing list.

Forward/reverse-picture-search

During playback, select the fast forward

speed (2x, 4x, 8x, 16x or 32x) with »4«;

Open the »Recorded Event« menu with »reC.

list«

during playback, select the rewind speed

(2x, 4x, 8x, 16x or 32x) with »3« (the pic-

ture freezes when rewinding).

– The menu appears.

Select the programme to be deleted with

v« or »Λ«.

repeating-a-scene-(A-B)

You can mark the starting and ending point of a

scene. The scene is then repeated continuously.

Press »« (blue) to delete the programme.

Confirm the security query with



(green)

Mark the starting point A by pressing »⁸« at

the required scene during playback.

–

note:

This scene is marked as the starting

point A.

You cannot delete programmes in the

»Recorded Event« menu which are currently

being recorded or played back.

Mark the end point B by pressing »8«

once again at the required scene during

playback.

Press »menu« to close the menu.

– This scene is marked as the end point B.

– The television repeats the programme be-

tween these two points.

Quit the repeat function with »⁷«.

-44

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-operAtion_{----------------------------------------------------------------------------------------------------------------}

image-data

File-formats

Your television can display pictures in the formats

JPEG, PNG and BMP.

Your television can work with the following file

formats using the USB sockets:

JPEG stands for Joint Picture Experts Group.

It denotes a process for compressing picture files.

PNG and BMP are process used to save image

data with no, or very little, losses.

Picture files can be stored with other types of files

on one medium.

These files can be organised into folders and

subfolders.

video-data

Special codecs for video compression and

decompression provide more memory space

without compromising the picture quality exces-

sively.

Your television plays video files in the formats

DIVS, XVID, H.264/MPEG-4 AVC (L4.1, 4 ref-

erence pictures), MPEG-4, MPEG-2, MPEG-1,

MJPEG and MOV.

The following file name extensions are also sup-

ported: AVI, MKV, MP4, TS, MOV, MPG, DAT,

VOB. These files can also contain audio files

compressed using MP3, AAC or Dolby Digital^©.

Audio-data

Your television can play audio data in the for-

mats MP3, AAC, WMA.

MP3 is the abbreviation for MPEG-1 Level 3 and

is based on the MPEG-1 standard, which was

developed by the MPEG (Motion Picture Expert

Group).

AAC stands for Advanced Audio Coding and

was also developed by MPEG. AAC provides

better sound quality at an identical data rate.

WMA (Windows Media Audio) is a compres-

sion standard for audio data developed by

Microsoft.

These formats allow audio files to be recorded

and played which sound as good as a CD, while

taking up only a fraction of the memory space.

File name extensions which are supported: MP3,

MP2, WMA, M4A, AAC.

MP3 files can be organised into folders and

subfolders, as on the computer.

-45

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-operAtion_{----------------------------------------------------------------------------------------------------------------}

Connecting-external--

data-media-

Before connecting the data medium, switch the

television to standby using »8«. Connect the

device and then switch the television on again.

Before removing the external data medium,

the television set must be switched to standby,

so that no data loss occurs.

notes:

The »usB1« socket of the television set

supplies a maximum power of 500 mA in

accordance with USB specifications. Exter-

nal hard disks which require more power

may therefore only be connected to the

»usB2-(HDD)« of the television set.

Connect the »usB2-(HDD)« socket of the

television and the corresponding socket on

the data device (external hard drive, digital

camera, card reader or MP3 player) using a

USB cable;

If you use a network cable for external hard

disks which are connected to the »usB2-

(HDD)« socket on the television, this net-

work cable must also be disconnected from

the power supply when the television is

switched off.

External data media may not be disconnect-

ed from the television set while files on the

data medium are being accessed.

insert the USB plug of the USB memory stick

into the »usB1« socket of the television set.

Confirm the display »

(green)

– The file browser appears.

« with



A bi-directional data transfer as defined for

ITE (Information Technology Equipment)

devices in EN 55022/EN 55024 is not

possible.

USB transfer is not in itself an operating

mode. It is only an additional function.

-46

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-operAtion_{----------------------------------------------------------------------------------------------------------------}

the-file-browser-

The file browser displays video, audio and

picture files stored on external data media.

settings-in-the-usB-setup-menu

selecting-the-menu

Press »

«, use »v«, »Λ«, » « or » « to

If an external data medium contains files in

different formats, you can, when necessary, filter

out the formats not required.

select the preset »USB« and press »oK« to

confirm.

Open the menu with »menu«.

main-menu-of-the-file-browser

Select the »SOURCE SETUP« menu item with

v« or »Λ« and press »oK« to confirm.

–

The »SOURCE SETUP« menu appears.

note:

Additional functions are explained in the

following sections.

VIDEO FILES

ROOT

Photo

Music

Film

switching-on-automatic-preview

If this function is switched on, a preview of the

selected file then appears in the file browser.

USB DRIVE

Used (MB)

Total (MB)

475

Select the line »Auto Preview« with »

v«

or »Λ«.

Use Control

Buttons

Speed

All

Repeat

Now

Total

Switch on the function with » « or » « (»On«).

Press »menu« to end the setting.

selecting-the-display-mode

Selected data format.

Name of the data medium.

Total number of folders on the data medium.

Select »View Mode« with »v« or »Λ«.

2- Select the preferred option with » « or » «.

Press »menu« to end the setting.

4- Preview of the selected file.

setting-the-display-duration-for-

pictures-in-a-slideshow

5- Information on the external data medium.

Menu navigation.

Select »Slide Show Interval« with »v« or »Λ«.

Selectthedisplayduration(3, 5, 10 seconds)

with » « or » «.

Press »menu« to end the setting.

-47

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-operAtion_{----------------------------------------------------------------------------------------------------------------}

Divx^®-voD

Basic-playback-functions-

You must have your device registered in order to

play the protected video that you will buy from

DivX^®.

Select the data medium by pressing »

«,

use » «, » «, » « or » « to select the option

»USB« and press »oK« to confirm.

– The file browser appears.

Select »DivX^®VOD« with »

confirm with »oK«

– Registration Code appears.

v« or »Λ« and

Select the file format (video files, audio files,

picture files) with » « or » «.

Visit “http://vod.divx.com” and register the

device with the registration code.

Switch to the folder/file list with »oK«.

note:

Press »menu« to end the setting.

USB data medium with several partitions is

connected to the USB sockets, the letter for

the respective drive (e.g. C) appears behind

the folder symbol. Select the letter of the

DivX Certified^®to play DivX^®and DivX

Plus™ HD (H.264/MKV) video up to

1080p HD including premium content.

drive with »

confirm.

v« or »Λ« and press »oK« to

ABOUT DIVX VIDEO: DivX^®is a digital video format created

by DivX, Inc. This is an official DivX Certified^®device that plays

DivX video. Visit divx.com for more information and software

tools to convert your files into DivX video.

Select the folder or file with »v« or »Λ« and

press »oK« to open it.

– A list of subdirectories appears.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified^®de-

vice must be registered in order to play purchased DivX Video-

on-Demand (VOD) movies. To obtain your registration code,

locate the DivX VOD section in your device USB setup menu.

Go to vod.divx.com for more information on how to complete

your registration.

note:

Switch back to the main folder with » «.

Select the track or picture with »

and press »⁸« to start playing.

You can view information on the film data by

pressing »?«.

v« or »Λ«

–

– When playing MP3 or WMA data, infor-

mation on the album, track and singer is

displayed at the left of the menu.

– When playing picture files, you can use

»?« to display information about the reso-

lution and size.

– When playing picture data, press »

?«

twice to enter the DivX Settings menu.

note:

When playing picture data, the file browser

switches off. Press » « to display the file

browser again.

Press »^!« to pause playback.

7- Press »⁸« to resume normal playback.

Press » « to end playback.

The file browser appears.

-48

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-operAtion_{----------------------------------------------------------------------------------------------------------------}

notes:

Additional-playback--

functions

Depending on the file format, the following

additional functions are available:

Use »Λ« to select »Up Folder«, when you

would like to return to the last folder. Use

»Root« (and then press »oK«) to return to

the main folder.

selecting-chapters-on-Divx^®-files

(only video files)

It is possible that files which are actually

supported do not function correctly in USB

mode. This is because certain files are not

recorded with standardised compression

processes, although they feature the “right”

file ending.

During playback, select the next chapter

with » «.

During playback, select the previous

chapter with » «.

If a video file features several audio tracks

(audio streams), you can switch these over

during playback in full screen mode with

note:

You can also select chapters by entering the

chapter number with »1...0«.

«.

When playing music files, you can use other

options in the USB mode at the same time.

This way, you can, for example, enhance a

slideshow with music.

selecting-titles-on-Divx^®-files

(only video files)

During playback, select the next title with

«.

»Λ

For films, only subtitles in the .SRT,

.ASS, .SSA, .SMI format are sup-

ported. The names of the subtitle and

film files must be identical. Otherwise,

no subtitles will be shown.

During playback, select the previous title

with » «.

playing-selected-titles

Only the marked tracks are played.

Select the titles with »

»oK« to mark it.

v« or »

« and press

Select the next title with »

« or » « and

press »oK« to mark it.

Start playback with »⁸«.

Press » « to end playback.

note:

To remove the marking, select the title with

« or » « and press »oK« to remove the

marking.

»v

-49

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

usB-operAtion_{----------------------------------------------------------------------------------------------------------------}

selecting-a-track-or-picture-in-steps- repeat-functions

(sKip)

Options:

– »One Repeat«: the current track will be

During playback, select the next track/

picture with »⁶«.

repeated.

– »All Repeat«: all tracks will be repeated.

During playback, select the previous track/

picture with »⁵«.

Switch off the repeat function before play-

back with »tools«.

– Playback begins with the track or picture

you selected.

Start playback with »⁸«.

Deactivate the repeat function with

»tools«.

– The display changes to »None Repeat«.

selecting-a-certain-passage-for-

playback-

(video files only)

During playback, press »oK«

Enter the passage (time) with »1-...-0« and

press » « (green) or »oK« to confirm.



Fast-forward

(for video and audio files only)

You can select different speeds (2-fold, 4-fold,

8-fold,16-fold and 32-fold forwards and back-

wards).

Select the playback speed during playback

with »3« or »4«.

2- Press »⁸« to resume normal playback.

rotating-pictures-

(picture files only)

You can rotate pictures by 90°.

During playback, press » « or « to rotate

the pictures by 90°.

-50

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

teletext-operAtion_{-----------------------------------------------------------------------------------------------}

enlarging-the-character-height

If you have difficulty reading the text on the

screen, you can increase the character height.

top-text-or-FloF-text-mode

Press »txt« to switch on teletext.

Select teletext pages directly with »1...0«

To enlarge the character height of a teletext

page, keep pressing »⁵«.

or step by step with »v« and »Λ«.

Return to teletext page 100 with »?«.

note:

page-hold

At the bottom of the screen there is an info

A multiple page may contain several sub-pages,

which are automatically scrolled by the broad-

casting station.

bar with red, green and – depending on the

channel – yellow and blue panels. Similarly,

the remote control also features buttons with

different colours with which these pages can

be selected.

Stop the automatic scrolling of the sub-pages

with »3«.

2- Quit the function with »3«.

Go back a page with » « (red).



Go to the next page with » « (green).



opening-a-sub-page-directly

Select a particular chapter with



If the selected teletext page contains additional

pages, the number of the current sub-page and

the total number of pages are displayed.

(yellow)

6- Select a particular subject with »

« (blue).



1- Press » « to open the sub-page function.

2- Use » « or » « to select the sub-page.

Quit teletext with »txt«.

normal-text-mode

3- Quit the function with » «.

Press »txt« to switch on teletext.

revealing-answers

Certain teletext pages contain hidden answers

or information.

Press »1…0« to select teletext pages directly.

Return to teletext page 100 with »?«.

Go back a page with »v«.

Display information with »4«.

Go to the next page with »Λ«.

2- Press »4« to conceal the information.

Quit teletext with »txt«.

split-screen

Additional-functions

This functions allows you to display the televi-

sion channel on the left side, the teletext on the

right side.

skipping-the-waiting-time

While a page search is progressing, you can

switch to the TV programme.

Switch the function on with »7«.

– The television channel and teletext are dis-

played next to each other.

Enter the teletext page number with »1…0«

and then press »⁶«.

Switch the function off with »⁷«.

– As soon as the page is found, the page

number is displayed.

Press »⁶« to switch to the teletext page.

-51

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

interACtive-portAl-(HBBtv)_{---------------------------------------------------------------}

what-is-Hbbtv?

The ARD offering includes, for example, a de-

tailed programme overview, the full offering of

"Das Erste¹Mediathek” as well as graphical re-

structured teletext with high-definition pictures.

The ZDF offering includes the "ZDF mediathek"

and other programme information (as of Septem-

ber 2011).

To put it simply, HbbTV provides next-generation

interactive teletext with modern structured con-

tent, high-definition pictures and video sequenc-

es, and interactivity.

To receive HbbTV, the television must be con-

nected to the internet.

ARD is currently offering this new service with its

"third programmes", as is ZDF.

The HBBTV Service is only available in some

countries.

Das Erste Mediathek

Alle Mediatheken

Impressum

l 15:11 Uhr 08.08.2011

Neueste Clips

Sendungen A - Z

?Sendung verpasst

5 / 5

Heute 08.08.2011

ABC

Alina

ARD-Mittagsmagazin

Tagesschau

01:43

04:47

14:00

14:10

06.08.11

.min 18

ARD-Ratgeber: Auto + Verkehr

ARD-Ratgeber: Bauen + Wohnen

ARD-Ratgeber: Geld

nachtmagazin

ARD-Ratgeber: Gesundheit

ARD-Ratgeber: Heim + Garten

ARD-Ratgeber: Recht

aus:Nachtmagazin

ARD-Ratgeber: Reise

ARD-Sondersendung

Ausblenden

Hilfe

Ausblenden

Programm

Mediathek

Videotext

2- Select your required subject area with »



Hbbtv-operation

When you switch to a TV programme that sup-

ports HbbTV, an information message is dis-

played if HbbTV is available.

(green), » « (yellow) or »



« (blue).



3- In your selected subject area, choose the re-

quired option using »

«, »

Λ«

» « or » «

and confirm with »oK«

Switch on HbbTV with » « (red).



4- Switch on HbbTV with » « (red).



– Information about the service is displayed

on the screen. In addition, the coloured

keys required for navigation are also dis-

played.

Additional-functions-for-video-

sequences

1- Start playback with »8«

note:

2- Pause playback with »!«.

The range of subject areas and the selection

of the individual subject areas is dependent

on the each programme provider.

3- Continue playback with »8«.

4- Rewind with »3« or forward with »4«.

The number buttons »1« to »0« are used for

additional functions.

5- Stop playback with » «.

-52

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

ConvenienCe-FunCtions_{-------------------------------------------------------------------------}

Changing-the-audio-language

(only for digital television channels)

opening-the-settinGs-menu

Open the menu with »menu«.

You can define a primary and a secondary

audio language.

Select the »SETTINGS« menu with »v« or

Λ« and press »oK« to confirm.

– The »SETTINGS« menu appears.

Select the line »Audio« with »v« or »Λ« and

press »oK« to confirm.

20.09.2010

15:46

–

The »Select Audio Language« menu

SETTINGS

appears.

Select the audio language with » «, » «,

Language settings

»v« or »

Λ« and then use » « (red) to set



it as the primary audio language, or use

English

« (green) to set it as the secondary audio



Audio

Subtitle

language.

English

Off

– The primary and secondary language is

display at the top right in the menu.

Subtitle Mode

Date and time settings

Press »menu« to end the setting.

Date & Time

Changing-the-subtitle-language-

and-subtitle-mode

(only for digital television channels)

Time Adjustment

Time Zone

Auto

GMT +1

You can switch the subtitles on and off, select the

subtitle language and allocate a second subtitle

language.

Exit

Back

note:

Select the line »Subtitle« with »v« or »Λ«

and press »oK« to confirm.

Additional operations are explained in the

following sections.

– The »Select Subtitle Language« menu ap-

pears.

language-settings

Select the subtitle language with »

v«,

»Λ

«, » « or » «, then use » « (red) to set



Changing-the-menu-language

it as the primary subtitle language, or use



Select the line »Menu« with »v« or »Λ« and

« (green) to set it as the secondary subti-

press »oK« to confirm.

tle language.

–

The »Select Menu Language« menu

appears.

– The primary and secondary language is

displayed at the top right in the menu.

2- Select the menu language with » «, » «,

To go back one menu level, press » «.

»v« or »Λ« and press »oK« to confirm.

Select the line »Subtitle Mode« with »v« or

Press »menu« to finish the setting.

Λ« and then set the preferred option »Off«,

»Hard of Hearing« or »Basic« with » « or

» «.

Press »menu« to end the setting.

-53

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

ConvenienCe-FunCtions_{-------------------------------------------------------------------------}

setting-the-date-and-time

Automatic-setting

Your television set detects the difference in time to

Greenwich Mean Time (GMT) automatically, as

long as the channel selected transmits a time signal.

timer-settings

entering-the-switch-off-time--

(sleep-timer)

In the »Sleep Timer« menu you can enter a time

for the television to switch off. After this time

has elapsed, the television switches to standby

mode.

Select the line »Date & Time« with »

« and press »oK« to confirm.

« or

Select the line »Sleep Timer« with »

»Λ«.

v« or

Select the line »Auto« with »v« or »Λ

« and

press »oK« to confirm.

– Date and Time will be updated automatically;

Enter the switch-off time with » « or » «.

note:

To switch off the function, use » « or » « to

set the switch-off time to »Off«.

Select the input box with »v« or »Λ«, enter

the data for Date and Time with »1...0«

and press »oK« to confirm.

Press »menu« to end the set-up.

manual-setting

switch-on-timer

You can also set the difference in time manually

– for example, when the correct time is not de-

tected automatically or does not correspond to

local time for other reasons

In the »Auto On« menu you can enter a switch-on

time for the television. After the preset time has

elapsed, the television switches on from standby

– at the preselected volume and the preselected

television channel.

Select the line »Time Adjustment« with »v«,

then select the option »Manual« with » «

Select the line »Auto On« with

»v

« or »

Λ«

or » «.

and press »oK« to confirm

– The lines »Time Zone« and »Daylight Sav-

ing« are active.

Select the line »Mode« with

« or » and

Λ«

use » « or » « to select when the television

Select the line »Time Zone« with »v« and

should switch on.

press »oK« to confirm.

Select the line »Input Source« with

»v« or »Λ«

– The »Select Time Zone« menu appears.

and use » « or » « to select the input source.

3- Select the appropriate time zone with » «,

Select the line »Service Type« with

»v« or »Λ«

» «, »

« or »

« and press »oK« to con-

and use » « or » « to select the preferred op-

firm.

tion (ATV, DTV, Radio or DATA).

Select the line »Channel« with

Select the line »Daylight Saving« with »

v«

»v« or »Λ«

and use » « or » « to set the option »Auto«,

and use » « or » « to select the preferred

»Off« or »On«.

channel.

Press »menu« to finish the setting.

note:

The line »Channel« is only active when the in-

put signal currently in use has been set. If no

entry has been made, then the first channel of

the selected input source will be used.

If the option »Auto« is selected in the line

»Time Adjustment«, the television set auto-

matically adapts the time to the time signal

from the respective broadcaster. However,

different channels may also use time bases

which are different to those of your country;

e.g. foreign broadcasters. In these cases,

reminders and planned recordings may be

annulled due to the time difference.

-54

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

ConvenienCe-FunCtions_{-------------------------------------------------------------------------}

Select the line »Volume« with

« or »

and

parental-control-settings

Authorising-programmes

There are films which may be wholly or partially

unsuitable for children.

use » « or » « to set the volume.

Select the line »Set Hour« with

v« or »Λ«

and enter the time with »1…0«.

8- Save the data with » « (green).



These programmes contain information which

marks the content or scenes with access levels of

4 to 18. You can select one of the access levels,

thereby authorising playback.

note:

You can abort the entry by pressing » « (red)



Press »menu« to end the setting.

Select the line »Parental Guidance« with

« or » « and press »oK« to confirm.

switch-off-timer

»v

In the »Auto Off« menu, you can enter a time

for the television to switch off. After this time

has elapsed, the television switches to standby

mode.

Enter the PIN code »1234« with »1-...-0«.

Select the access level with » « or » «.

Press »menu« to end the setting.

Select the line »Auto Off« with

« or »

Λ«

locking-menus

and press »oK« to confirm

This function allows you to lock the »Automatic

Channel Search«, »Digital Manual Tuning«, »An-

alogue Manual Tuning« and »Program Table«

menus so that they can be only accessed by

entering a PIN code.

Select the line »Mode« with

« or » and

Λ«

use » « or » « to set the preferred mode.

Select the line »Set Hour« with

»v« or »Λ«

and enter the time with »1…0«.

4- Save the data with » « (green).



Select »Menu Lock« with »v« or »Λ«.

note:

Enter the PIN code »1234« with »1-...-0«.

You can abort the entry by pressing » «

(red).



Activate the lock with » « or » « (»On«).

note:

Press »menu« to end the setting.

To switch off the menu lock, use » « or » «

to select the setting (»Off«).

Automatic-switch-off-(Auto-sleep)

If this function is activated, the television switches

automatically to standby after 5 minutes if no

video signal is broadcast or in accordance with

the according to European regulations, the tel-

evision switches automatically to standby after 4

hours provided that none of the buttons on the

remote control or on the television is operated

during this period.

Press »menu« to end the setting.

locking-keys-(parental-lock)

When the key lock is activated, the buttons on

the television set do not function.

Select the line »Keypad Lock« with »

«.

v« or

»Λ

Enter the PIN code »1234« with »1-...-0«.

Select the line »Auto Sleep« with »

v« or

3- Activate (On) or deactivate (Off) the key lock

»Λ«.

with » « or » «.

Activate the function with » « or » «

Press »menu« to end the setting.

(»On«).

note:

To switch off the function, use » « or » « to

select the setting »Off«.

Press »menu« to end the setting.

-55

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

ConvenienCe-FunCtions_{-------------------------------------------------------------------------}

Changing-the-pin-code

updating-software-(oAD)

You can also enter a personal PIN code instead

of the default code »1234«. Please take note of

your own PIN code.

(from satellite, for digital channels only)

In the »SETTINGS« menu, select the line

»Check For OAD Updates updates« with

»v« or »Λ« and press »oK« to confirm.

Select »Set PIN« with »v« or »Λ« and press

»oK« to confirm.

– A search for new software will be made

and – if available – it will be installed.

Enter the current PIN code 1 2 3 4 with

»1-...-0«.

note:

If a search for software updates should be

Enter your new four digit PIN code with

»1-...-0«.

made automatically, select the line »Auto-

matic OAD Update« with »v« or »Λ« and

Enter your new four digit PIN code with

»1-...-0« again.

use » « or » « to select the option »On«.

– The software will be updated automati-

cally as far as possible.

Press »menu« to end the setting.

locking-television-channels-

You can lock individual television channels, for

example channels unsuitable for children, using

a personal PIN code.

updating-software-(online)

(from the internet, for digital channels only)

In the »SETTINGS« menu, select the line

»Check For Online Updates updates« with

Open the menu with »menu«.

Select the »SOURCE SETUP« menu with »

or »Λ« and press »oK« to confirm.

v«

v« or »Λ« and press »oK« to confirm.

– A search for new software will be made

and – if available – it will be installed.

Select the line »Program Table« with »

v« or

»Λ« and press »oK« to confirm.

note:

– The »PROGRAM TABLE« menu is dis-

played.

If a search for software updates should be

made automatically, select the line »Auto-

In the »PROGRAM TABLE« menu, switch

matic Online Update« with »v« or »Λ« and

over to the list view with » « (yellow).



use » « or » « to select the option »On«.

– The software will be updated automati-

cally as far as possible.

Select the channel to be locked with »

or »Λ«.

v«

Press »menu« to end the setting.

Select the column »Lock« with » « or » «

and press »oK« to lock the channel.

restoring-the-television-to-the-

default-settings

Enter the PIN code »1234« with »1-...-0«.

– The channel is marked using »✔«.

This function allows you to delete the channel

lists and all custom settings.

note:

To remove the lock, select the channel again

In the »SETTINGS« menu, select the line

with »v« or »Λ«, press »oK« to confirm

»Restore Factory Defaults« with »v« or »Λ«

and then enter the PIN code 1 2 3 4 using

and press »oK« to confirm.

»1-...-0«.

Press » « (green) to confirm the warning



Press »menu« to end the setting.

message.

– The »Source Setup« menu appears.

Continue the settings with the chapter “Initial

set-up and tuning television channels” on

page 14.

-56

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

operAtion-usinG-externAl-DeviCes_{------------------------------}

searching-for-and-activating--

external-devices

You can connect up to 11 devices with DIGI LINK

functions to your television.

DiGi-linK

Your television is equipped with

the DIGI LINK function.

This function uses the CEC

(Consumer Electronics Control)

protocol.

Open the Tools menu with »tools«.

Select the menu item »CEC« with »v« or

CEC allows external devices which are connect-

ed to the »HDmi« sockets by an HDMI cable

(e.g. DVD player) to be operated with a remote

control.

Prerequisite is that the devices connected support

CEC. Read the operating manual for the external

device to find out how to activate the correspond-

ing function.

Λ« and press »oK« to confirm.

– The »HDMI CEC Device List« appears.

Start the device search with » « (red).

The devices found are displayed in the

menu.



–

3- Select the device for operation with »

v«,

«, » « or » « and press »oK« to mark it.

– If the selected device is connected to a

different input to the current one, a switch

to the respective input will occur auto-

matically.

the-DiGi-linK-functions-on-your-

television

switching-on-the-television--

automatically-from-standby

Press »menu« to end the setting.

If the »Autom. switch-on TV« function is activated

(»On«), then once the external device (e.g.

DVD player) is switched on, the television also

switches on and the appropriate HDMI preset is

selected.

Automatic-selection-of-the-HDmi-

preset-on-the-television

If your television is switched on and you then

switch on the external device (e.g. DVD player),

the appropriate HDMI preset on the television

will be selected.

selecting-the-menu-language

The television menu language is automatically

selected on the external device (e.g. DVD player).

The external device must support this function.

switching-off-the-external-device-

automatically

If you switch your television to standby, the ex-

ternal device (if it is switched on) will also be

switched to standby.

DIGI LINK is always active on your television set.

-57

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

operAtion-usinG-externAl-DeviCes_{------------------------------}

switching-the-device-to-standby

This option switches the external device to

standby.

Device-operation

You can decide whether external devices should

react to your television's remote control.

Press »

«, use »v«, »Λ«, » « or » « to

Press »

«, use »v«, »Λ«, » « or » « to

select the preset »HDMI1« to »HDMI4« and

press »oK« to confirm.

select the preset »HDMI1« to »HDMI4« and

press »oK« to confirm.

Open the menu with »menu«.

Select the menu item »SOURCE SETUP« with

v« or »Λ« and press »oK« to confirm.

– The »SOURCE SETUP« menu appears.

Select »Device Standby« with »v« or »Λ«

20.09.2010

15:46

and press »oK« to confirm.

SOURCE SETUP

– The external device switches itself off.

Source

HDMI1

DIGILINK

GRUNDIG DVD

RC Passthrough

Device Selection

Remote Control

Device Standby

Exit

Back

Select the line »Remote Control« with »

or » «.

v«

5- Select the type of operation (»RC Pass-

through«, »Deck« or »Tuner« with » « or

» «.

notes:

»RC Passthrough« can be used for all devices.

»Deck« and »Tuner« can be selected in ac-

cordance with the external device which

has been connected.

Try out which type of remote control opera-

tion the external device reacts to the best.

Read about the scope of functions of the

DIGILINK-compatible device in the respec-

tive operating manual.

Press »menu« to end the setting.

-58

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

operAtion-usinG-externAl-DeviCes_{------------------------------}

High-definition--HD-ready

Connection-options

Which television socket(s) you connect your

Connect the corre-

external devices to depends on the sockets

the external device is equipped with and the

signals which are available.

sponding input sources

(e.g. HDTV receiver or

HD-DVD player) to the

»HDmi« sockets (for

digital HDTV sources).

Please note: With many external devices,

the resolution of the video signal must be

adjusted to the input sockets of the television

(see the operating manual of the external

device). You can find out which values you

need to set by referring to the guidelines in

the sections about the various connection

options.

This ensures that you can view digital HDTV

programmes, even if they are copy-protected

(HDCP High Bandwidth Digital Content Protec-

tion), without encountering problems.

Do not connect any other equipment while

the device is switched on. Also switch off the

other equipment before connecting it.

Do not plug in the power cord of the device

until you have connected the external equip-

ment and the antenna.

-59

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

operAtion-usinG-externAl-DeviCes_{------------------------------}

...-using-the-sCArt-socket--

(CvBs/rGB-signal)

Connecting-external-devices

...-with-digital-audio/video-signals

Suitable devices: Digital satellite receiver,

Suitable devices: Digital satellite receivers,

DVD player/recorder, set-top box, games con-

sole, video recorder, decoder.

Playstation, BluRay player, DVD player/

recorder, set-top box, notebook, PCs.

Video signal: CVBS/RGB.

Video signal: Digital video; resolution: stand-

Audio signal: stereo, analogue.

ard 576p; HDTV 720p, 1080i, 1080p.

»AV1« preset.

Audio signal: digital audio (stereo, multi-chan-

nel compression, uncompressed).

Connect the »Av1/s-vHs« socket on the

television and the corresponding socket on

the external device using a SCART cable

(video and audio signal).

Presets »HDMI 1«, »HDMI 2«, »HDMI 3« or

»HDMI4«.

Connectthe»HDmi1«,»HDmi2«,»HDmi3«

or »HDmi4« socket on the television and the

corresponding HDMI socket on the external

device using a standard HDMI cable (digital

video and audio signal).

Activating-a-decoder

If a decoder is connected to the »Av1/s-vHs«

socket, this must be activated to provide an

unencrypted video/audio signal.

Open the menu with »menu«.

...-with-analogue-video-signal-

(progressive)

Select »SETTINGS« with »v« or »Λ« and

press »oK« to confirm.

– The »SETTINGS« menu appears.

Suitable devices: DVD recorders/players,

games consoles.

Select the »Decoder« with »

v« or »Λ«.

Video signal: YUV; resolution: standard 576p;

HDTV 720p, 1080i, 1080p.

Activate the function with » « or » «

(»On«).

Press »menu« to end the setting.

Audio signal: stereo, analogue.

»Component« preset.

Connect the »Component- Y- pb- pr«

sockets on the television to the correspond-

ing sockets of the external device with RCA

cables (video signal).

...-with-s-video-signal

Suitable devices: DVD player/recorder, video

recorder, camera recorder, notebook, PC.

Video signal: Y/C.

Connect the »Component-l-r« sockets

on the television to the corresponding sock-

ets of the external device with RCA cables

(audio signal).

Audio signal: stereo, analogue.

»S-VHS« preset.

1- Connect the » Av1/s-vHs« socket on the

television and the corresponding socket on

the external device using an EURO/AV ca-

ble (video and audio signal).

-60

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

operAtion-usinG-externAl-DeviCes_{------------------------------}

...-with-an-analogue-tv-signal

using-a-DvD-player,-

DvD--recorder,-video-recorder--

or-set-top-box

Suitable devices: Digital satellite receiver,

DVD player/recorder, set-top box, camera

recorder.

Switch on the external device and select the

function you wish to use.

Video signal: CVBS.

Audio signal: stereo, analogue.

Press

«, use »v«, »Λ«, » « or » « to

»AV2« preset.

select the preset for the input signal (»AV1«,

»AV2«, »S-VHS«, »HDMI1«, »HDMI2«,

»HDMI3«, »HDMI4« or »Component«)

and press »oK« to confirm.

Connect the »video« socket on the

television to the corresponding socket of the

external device with an RCA cable (video

signal).

Headphones

Connect the »l--r« sockets on the television

to the corresponding sockets of the external

device with RCA cables (audio signal).

Connecting-the-headphones

Plug the headphone jack (3.5 mm ø jack

plug) into the headphone socket on the tel-

evision.

note:

There must not be a video signal at the »Av2«

and »Av1/s-vHs« socket at the same time.

Changing-the-headphone-volume

This could lead to picture disturbances.

Open the menu with »menu«.

Select the menu item »SOUND SETTINGS«

with »v« or »Λ« and press »oK« to confirm.

– The »SOUND SETTINGS« menu appears.

Select the line »Headphone« with » « or

«.

»Λ

Set the preferred volume with » « and » «.

Press »menu« to end the setting.

note:

Prolonged listening with headphones at loud

volumes can damage your hearing.

-61

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

operAtion-usinG-externAl-DeviCes_{------------------------------}

notes:

Hi-fi-system

If the audio system also has a playing

Connecting-digital-multi-channel-

function (e.g. Home theater system, DVD

amplifier/Av-receiver

player), two devices will be listed on the

HDMI CEC list. The first one is the player,

and the second one is the audio playback.

With this connection, you can playback the

audio signal of the television channel via the

HDMI cable sur the multi-channel amplifier or

the AV receiver.

If a Blu-ray Player is connected to the AV

receiver, please remove the Disc from the

Player during the registration.

1- Connect the »HDmi2-(ArC)« (HDMI 1.4

Audio Return Channel) socket to the relevant

socket on the HDMI ARC compliant Digital

multichannel amplifier / AV receiver with a

standard HDMI cable (digital audio signal);

Press »menu« button to exit the HDMI

CEC device list.

Open the menu with »menu« button.

Select the menu item »SOUND SETTINGS«

with »v« or »Λ« and confirm with »oK«.

2- Connect the »optic-out« socket on the

television to the corresponding socket on the

AV receiver using a standard optic digital

cable (digital audio signal).

– The menu appears.

Select the line »Audio Output Setup« with

v« or »Λ« and confirm with »oK«.

– The menu appears.

important:

Do not use a HDMI cable longer than 5 m

for HDMI ARC connection.

Select the line »ARC« with

v« or »Λ«.

10 Select the setting »On« with » « or » «.

Apply-the-device--with-HDmi-ArC-

function-and-activate-HDmi-ArC

notes:

The internal speakers of the television are

switching off automaticaly.

Switch on the the multi-channel amplifier

or the AV receiver. If a Blu-ray Player is

connected on the AV receiver, the player

must be switched on, too.

For switching off the HDMI ARC function

select »Off« with » « or » «.

The ARC function will be deactivated while

switching off the television and the internal

speakers are active again.

Open the Tools menu with »tools«

button.

11 Press »menu« to end the setting.

Select the menu item »CEC« with »

« and confirm with »oK«.

– The »HDMI CEC Device List« appears.

v« or

Start device search with » « (red) button.



– Audio device connected to the »HDmi2-

(ArC)« source shall be displayed in the

list.

“Dolby” and the double-D logo are trademarks of

Dolby Laboratories.

Manufactured under licence from Dolby Laboratories.

-62

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

operAtion-usinG-externAl-DeviCes_{------------------------------}

playing-the-audio-signal-via-the--

HiFi-system

1- Connect the »AuDio-out-l-r« sockets on

the television to the corresponding socket of

the AV receiver with an RCA cable (digital

audio signal).

note:

If this function is not activated, the audio sig-

nal is transmitted to the HiFi system/AV re-

ceiver (connected to »AuDio-out-l-r«).

Open the menu with »menu«.

Select the menu item »SOUND SETTINGS«

with »v« or »Λ« and press »oK« to confirm.

– The »SOUND SETTINGS« menu appears.

Select »Audio Output Setup« with » « or

Λ« and press »oK« to confirm.

– The menu appears.

Select the line »Audio Out« with »v« or »Λ«

and press » « or » « to activate the audio

output (»Line Out«).

Select the line » Audio Out Status« with »

or » « and select the option »Fixed« or »Ad-

justable« with » « or » «.

v«

notes:

If you select »Adjustable«, the volume can

be changed in the menu option » Audio Out

Volume«.

If the audio should only be output via the

HiFi system/AV receiver, select the option

»Off« in the line »TV Speaker with » « or

» «.

Press »menu« to end the setting.

-63

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

operAtion-As-A-pC-monitor_{-----------------------------------------------------------}

Connecting-a-pC

20.09.2010

15:46

SOURCE SETUP

Connect the »pC-in« socket on the television

to the corresponding socket on the PC using

a VGA cable (video signal).

Source

Connect the »Audio« socket on the televi-

sion to the corresponding socket on the PC

using a suitable cable (audio signal).

Auto Ajust

Extended settings

Auto Ajust Mode

50H - 50V

note:

Position

Size

Adjust your PC to the monitor (for example,

picture resolution 1280 x 768, picture fre-

quency 60 Hz).

Phase

selecting-presets-for-the-pC

Exit

Back

Press »

« and use »v«, »Λ«, » « or » «

to select the preset »PC« and press »oK« to

confirm.

Options:

settings-for-pC-mode

–

»Auto Ajust« for automatic PC configura-

tion.

Open the menu with »menu«.

– »Auto Ajust Mode«, select the option

»On« if the configuration should be imple-

mented automatically in PC mode.

– »Position« to configure the horizontal and

vertical picture position.

– »Size« to set the cycle frequency.

– »Phase« to eliminate flicker, unfocused

pictures or horizontal interference.

Select the »SOURCE SETUP« menu item with

v« or »Λ« and press »oK« to confirm.

– The »SOURCE SETUP« menu appears.

3- Select the function or setting with » « or

« or » «, » « to

Λ«, and then use »v«, »Λ

implement it.

Press »menu« to end the setting.

-64

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

operAtion-witH-A-Common-interFACe_{-------------------}

what-is-a-Common-interface?

Access-control-for-Ci-module-and-

smart-card

Common Interface (CI) is an interface for

DVB receivers.

Encrypted channels can only be viewed

Open the menu with »menu«.

Select the line »SOURCE SETUP« with »

or »Λ« and press »oK« to confirm.

v«

with a CA module suitable for the encryp-

tion system and in conjunction with the

corresponding smart card.

The television set is equipped with a Com-

mon Interface slot into which CI modules

from various providers can be inserted.

You can insert the provider’s smart card into

the CA module in order to enable the en-

crypted channels you wish to view.

– The »SOURCE SETUP« menu appears.

Select the line »CA-Module« with » « or

« and press »oK« to confirm.

notes:

This menu provides operating instructions

and – after you enter your PIN code – ac-

cess to the PAY-TV provider's channels.

inserting-the-CA-module

note:

The remaining settings are described in the

operating manuals for your CI module and

smart card.

Switch the device off before you insert a CA

module into the »Ci« slot.

The CA modul is not supported in certain

countries and regions; please consult your

authorised dealer.

Insert the corresponding smart card into the

CI module.

Insert the CI module with the smart card into

the »Ci« slot on the television.

Press »menu« to end the setting.

note:

In the »CA Module« sub-menu you can see

which CA module has been inserted in the

CI slot.

If you are inserting a CA module into the

CI slot of the television for the first time,

you will need to wait a moment until the

CA module is detected.

-65

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

speCiAl-settinGs_{-----------------------------------------------------------------------------------------------------------}

Select the line »Scan Mode« with »

«.

Select the scan mode with » « or » «

(for unencrypted channels, for encrypted

channels only, or both).

v« or

searching-for-digital-television-

channels-from-a-satellite-

automatically

»Λ

Satellite data changes frequently, new channels

are constantly being added. You should

therefore perform an automatic search from time

to time.

Select the line »Service Type« with »

«.

Use » « or » « to select whether you

v« or

»Λ

This searches all transponders for new channels.

want to search for television channels (TV)

only, radio stations only (Radio) or both

(Radio + TV).

Open the menu with »menu«.

Select the line »SOURCE SETUP« with »v«

or »Λ« and press »oK« to confirm.

Select the line »Network Search« with »

or » «.

Select the option »On« with » « or » «

– If the »Network Search« is set to »On«,

the data will be accessed via the new tran-

sponder of the network which has been

set.

v«

– The »SOURCE SETUP« menu appears.

20.09.2010

15:46

SOURCE SETUP

Source

Satellite

Automatic Channel Search

Digital Manual Tuning

Antenna Settings

10 Start the scan with » « (red).



note:

If the previously stored channels should be

retained in the channel list and the new

channels found be added to it, then press

Program Table

Signal Information

« (green).



Automatic Service Update

Off

Not Inserted

If » « (red) is pressed, the saved channels



will be deleted from the current channel list.

– The »Results« menu appears, and the scan

for TV channels begins.

CA -Module

Positioner settings

Exit

Back

– Depending on the number of television

channels received, this can easily take a

few minutes.

– The search is complete as soon as the

»PROGRAM TABLE« appears.

Select the line »Source« with »v« or »Λ«

and press »oK« to confirm.

Select the input source »Satellite« with » «,

note:

» «, »v« or »Λ« and press »oK« to con-

You can abort the search by pressing

»menu«.

firm.

Select the line »Automatic Channel Search«

11 Press »menu« to end the setting.

with »v« or »Λ« and press »oK« to confirm.

– The menu appears.

Select the line »Select Satellites« with »v« or

Λ« and press »oK« to confirm.

– The »SELECT SATELLITE« menu appears.

Select a satellite with »v« or »Λ« and press

»oK« to confirm.

-66

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

speCiAl-settinGs_{-----------------------------------------------------------------------------------------------------------}

searching-for-digital-television--

channels-from-a-satellite-manu-

ally

If you know the parameters of a new television

channel, you can also search for it manually.

Current transponder data can be found in the

teletext, in satellite TV magazines or on the

Internet.

lnB-settings

notes:

The following description about the LNB

settings premise a substantial expertise

about the satellite systems. Ask your

specialist dealer.

Your TV supports SCR system (Satellite

Channel Router). If you are using SCR

satellite system, follow the steps described

Open the menu with »menu«.

in »LNB Type« section.

Select the line »SOURCE SETUP« with »

or »Λ« and press »oK« to confirm.

v«

Open the menu with »menu«.

– The »SOURCE SETUP« menu appears.

Select »Digital Manual Tuning « with » « or

« and press »oK« to confirm.

– The menu appears.

Select the line required for the parameters

with » « or » «.

Select the line »SOURCE SETUP« with »

or » « and press »oK« to confirm.

– The »SOURCE SETUP« menu appears.

»Λ

Select »Antenna Settings« with »v« or »Λ

and press »oK« to confirm.

– The »ANTENNA SETTINGS« menu ap-

pears.

– »Frequency (MHz)«: Enter the five-digit

frequency with »1-...-0« .

Select the line required for the parameters

with »v« or »Λ«.

– »Symbol Rate (kS/s)«: Enter the five-digit

symbol rate with »1-...-0« .

– »Satellite«: »Press oK«, select a satellite

with » «, » «, » « or » « and press

– »Polarization«: Use » « or » « to set the

polarisation to »Horizontal« or »Vertical«.

– »Network Search«: use » « or » « to se-

»oK« to confirm.

– »Transponder«: »Press oK«, select a tran-

sponder with » «, » «, » « or » « and

press »oK« to confirm. Use » « (red) to

lect the option »On« or »Off«.

– »Scan Mode«: Use » « or » « to select



whether you want to search for unencrypt-

ed (Unencrypted) channels only, encrypt-

ed (Encrypted) channels only, or for both

(Unencrypted + Encrypted).

add a transponder, use » « (green) to



delete it, or use » « (yellow) to change



transponder data.

– »LNB Power«: Set the LNB power supply

(depending on the type of LNB) to »Off«

»13/18 V« or »14/19 V« with » « or » «.

– »Service Type«: Use » « or » « to select

whether you want to search for television

channels only (TV), radio stations only

(Radio), or both (Radio + TV).

– »LNB Type«: Select the LNB type used

in the satellite system with » « or » «. If

you are using a satellite antenna with an

Single Cable Distribution multiswitch, select

the setting »Grundig SCR«. After it, please

perform the »User Band«, »KB Frequency«

and »LNB Selection« settings in the

Start the scan with » « (red).

– The »Results« menu appears, and the scan

for TV channels begins.



note:

You can abort the search by pressing

»menu«.

submenus. The necessary parameters you

will get from the operator of the satellite

antenna. Use only this specification!

»User Band«: Select the user band

Press »menu« to end the setting.

number assigned to the user with » «

or » «.

-67

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

speCiAl-settinGs_{-----------------------------------------------------------------------------------------------------------}

»KB Frequency (MHz)«: Enter the user

settings-for-motorised-antennas-

band frequency assigned to the user

(DiseqC-1.2)

band with »1...0« buttons.

Your television set supports motorised satellite

»LNB Selection«: If more than one

satellites are used in the current SCR

system, select »1/2« to»2/2« for the

satellite corresponding to the relevant

positions using » « or » « buttons.

systems in compliance with DiSEqC 1.2. This

function allows the satellite antenna to be oper-

ated via the television set.

Open the menu with »menu«.

Select the line »SOURCE SETUP« with »

v«

notes:

or »Λ« and press »oK« to confirm.

Use installation equipment supported /

suggested by your Multiswitch.

– The »SOURCE SETUP« menu appears.

Select the line »DiSEqC 1.2« with »

Other users / receivers connected to the

system may be affected if the specified user

band number and frequency is changed

during installation.

or »

Λ«. Select the option »On« with » «

or » «

– The line »User Mode« is active.

note:

User band and User band frequency is

specified on the Multiswitch used; and

each user / receiver uses a specified user

band and user band frequency.

Additional operations are explained in the

following sections.

With SCR satellite system, auto search by

several users / receivers at the same time

may cause problems.

– »22 KHz«: Depending on the LNB type,

22 kHz audio is selected. For a univer-

sal LNB, this option is set to »Auto« and

cannot be changed.

– »DISEqC mode« and »LNB selection«:

depending on the type of antenna used,

use » « or » « select the option »Off«,

»DiSEqC 1.0« or »DiSEqC 1.1«.

»Off«: for a satellite system with only

one antenna.

»DiSEqC 1.0«: allows up to four satel-

lites to be received simultaneously.

Under »LNB selection«, use » « or

» « to select the option »1/4«, »2/4«,

»3/4« or »4/4«.

»DiSEqC 1.1«: allows up to 16 satel-

lites to be received simultaneously.

Under »LNB selection«, use » « or

» « to select the option »1/16« to

»16/16«.

Press »menu« to end the setting.

-68

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

speCiAl-settinGs_{-----------------------------------------------------------------------------------------------------------}

user-mode

expert-mode

You can adjust the alignment of the satellite an-

tenna to each individual satellite. These settings

will be saved so that the antenna can later be

easily guided to each saved alignment.

You can restrict the antenna's range or reset

the antenna.

Select the line »Installer Mode« with »

« and press »oK« to confirm.

– The »INSTALLER MODE« menu appears.

v« or

»Λ

Select the line »User mode« with »

v«

or » « and press »oK« to confirm.

Select the preferred option with

or » «.

»v«

– The »USER MODE« menu appears.

Select the preferred option with

– »Limit Position«: Defines the range in

or »

– »Satellite«: »Press oK«, select a satellite

with » «, » «, » « or » « and press

Λ«.

which the antenna may move. Use » «

to set the western limit, use » « to set the

eastern limit.

»oK« to confirm.

– »Move Motor«: Aligns the antenna with

– »Transponder«: »Press oK«, select the

transponder from which the signal is being

the selected satellite. Use » « to align the

antenna to »west«, use » « to align the

received with » «, » «, »

v« or »

Λ« and

antenna to »east«.

press »oK« to confirm.

– »Go To Stored Position«: Press »oK« to

save the current antenna alignment.

– »Store Stored Position«: Aligns the antenna

with the reference point of the positioner.

– »Reset DiSEqC 1.2 Limit«: Resets the limit

position of the antenna.

– »Moving Mode«: Use » « or » « to select

the option »Discrete« or »Continuous«.

– »Discrete«: Moves the antenna in

defined steps to the west and the east.

– »Continuous«: Moves the antenna to the

west or east continuously.

– »Step Size«: Use » « or » « to select the

number of steps with which the antenna

should turn. »Step Size« is only active

when the »Transport Mode« was set to

»Discrete«.

– »Move Motor«: Aligns the antenna with

the selected satellite. Use » « to align it to

»West«, use » « to align it to »East«.

– »Go To Stored Position«: Aligns the antenna

to a saved satellite position. Up to 50 posi-

tions can be saved. »Press oK« and then

select the saved position with » « or » «.

Press » « (green) to confirm – the anten-

na will be aligned with the saved position.



– »Store Stored Position«: The current anten-

na alignment is saved.

Press »menu« to end the setting.

-69

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

speCiAl-settinGs_{-----------------------------------------------------------------------------------------------------------}

note:

searching-for-television-chan-

You can accelerate the search. To do this,

you need information about the frequency

and network ID. You are usually able to get

this data from your cable operator or find it

in forums on the Internet. For example, the

frequency 402MHz and network ID 61441

can be entered for Germany.

nels-from-the-cable-provider-

automatically

Open the menu with »menu«.

Select the line »SOURCE SETUP« with »

or »Λ« and press »oK« to confirm.

– The »SOURCE SETUP« menu appears.

Select the line »Source« with

or » « and press »oK« to confirm.

Select the option »Cable« with » «, » «,

Start the scan with » « (red).

– All channel and favourites lists will be

deleted and compiled anew.



»v

« or »

Select the line »Automatic Channel Search«

with » « or » « and press »oK« to confirm.

– The menu appears.

Λ« and press »oK« to confirm.

note:

After starting the scan, a security query will

appear. Press » « (green) to confirm the



option »Yes«.

– The »Results« menu appears, and the scan

for TV channels begins. Depending on the

number of television channels received,

this can easily take a few minutes.

20.09.2010

15:46

SOURCE SETUP

AUTOMATIC CHANNEL SEARCH

– The scan is complete as soon as the »PRO-

GRAM TABLE« appears.

Connection Type

Cabel

U.K.

Country

note:

ATV & DTV

Quick

Scan Type

You can abort the search by pressing

»menu«.

Cable Scan Type

Frequency (MHz)

Network ID

Auto

Press »menu« to end the setting.

Auto

Exit

Back

Start Search

Select the line »Scan Typ« with »

« or »

and set the option »DTV« with » « or » «.

Select the line »Cable Scan Type« with »

or »

with » « or » «.

v«

Λ« and set the option »Quick« or »Full«

– The search function »Quick« sets the channels

according to the information provided by your

cable provide in the transmission signal.

– If the option »Full« is selected, the entire fre-

quency range will be scanned. The search can

take a long time with this option. This option is

recommended if your cable provider does not

support the search type »Quick«

-70

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

speCiAl-settinGs_{-----------------------------------------------------------------------------------------------------------}

searching-for-television-channels- searching-for-digital-terrestrial-

from-the-cable-provider-manu-

ally

tv-channels-automatically

Open the menu with »menu«.

Select the line »SOURCE SETUP« with »

or »Λ« and press »oK« to confirm.

Select the line »SOURCE SETUP« with »

– The »SOURCE SETUP« menu appears.

Select the line »Source« with

or » « and press »oK« to confirm.

Select the option »Air« with » «, » «, »

or »Λ« and press »oK« to confirm.

– The »SOURCE SETUP« menu appears.

Select the line »Source« with »v« or »

v« or

and press »oK« to confirm.

Λ« and press »oK« to confirm.

Select the option »Cable« with » «, » «,

»v« or »Λ« and press »oK« to confirm.

Caution:

Select » Digital Manual Tuning« with »

« or

The antenna power supply (line »Active

Antenna Power«) may only be switched on

if the antenna is an active indoor antenna

with a signal amplifier and it is not already

supplied with a voltage via a mains plug

(or similar supply). Otherwise you may

cause a short circuit and irreparably dam-

age your antenna.

« and press »oK« to confirm.

– The menu appears.

Enter the four-digit frequency with »1-...-0«

and press »oK« to confirm.

–

The search starts after confirming, the

channels found are displayed in the »Re-

sults« menu.

Select the »Active Antenna Power« with »

or » «. Switch on the antenna power supply

for the antenna with » « or » « (»On«).

v«

Press »menu« to finish the setting.

Select the line »Automatic Channel Search«

with » « or » « and press »oK« to confirm.

– The menu appears.

20.09.2010

15:46

SOURCE SETUP

AUTOMATIC CHANNEL SEARCH

Connection Type

Air

U.K.

Country

DTV & ATV

Scan Type

Exit

Back

Start Search

-71

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

speCiAl-settinGs_{-----------------------------------------------------------------------------------------------------------}

Select the line »Scan Typ« with »

v« or »Λ«

searching-for-digital-terrestrial-

tv-channels-manually

and set the option »DTV« with » « or » «.

Start the scan with » « (red).



Open the menu with »menu«.

– All channel and favourites lists will be

deleted and compiled anew.

Select the line »SOURCE SETUP« with »

or »Λ« and press »oK« to confirm.

note:

– The »SOURCE SETUP« menu appears.

After starting the scan, a security query will

Select the line »Source« with »v« or »

appear. Press » « (green) to confirm the



and press »oK« to confirm.

option »Yes«.

Select the option »Air« with » «, » «, »v« or

– The »Reults« menu appears, and the scan

for TV channels begins. Depending on the

number of television channels received,

this can easily take a few minutes.

– The scan is complete as soon as the

»PROGRAM TABLE« appears.

»Λ

« and press »oK« to confirm.

Caution:

The antenna power supply (line »Active

Antenna Power«) may only be switched on

if the antenna is an active indoor antenna

with a signal amplifier and it is not already

supplied with a voltage via a mains plug

(or similar supply). Otherwise you may

cause a short circuit and irreparably dam-

age your antenna.

note:

You can abort the search by pressing

»menu«.

Press »menu« to end the setting.

Select the »Active Antenna Power«« with

Automatic-service-update-

If this function is activated, possible changes of

network operators are updated automatically.

v« or »Λ«. Switch on the antenna pow-

er supply for the antenna with » « or » «

(»On«).

Select » Digital Manual Tuning« with »

« and press »oK« to confirm.

– The menu appears.

Enter the channel number directly with

1-...-0« and press »oK« to confirm.

The unit must be located in stand-by mode.

v« or

»Λ

Open the menu with »menu«.

Select the line »SOURCE SETUP with »v«

or »Λ« and press »oK« to confirm.

Select the line »Automatic Service Update«

with » « or » «.

–After the search is complete, the channels

found are displayed in the »Results« menu.

Select the automatic update with » « or » «

(»On«).

Press »menu« to finish the setting.

Press »menu« to end setting.

-72

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

speCiAl-settinGs_{-----------------------------------------------------------------------------------------------------------}

Select the line »Automatic Channel Search«

with »

firm.

tuning-analogue-television-

-channels

This setting is only necessary if you cannot re-

ceive any digital channels and you have not car-

ried out an analogue search during initial setup.

The television channels can be set directly or

using the scan.

v« or »

« and press »oK« to con-

20.09.2010

15:46

SOURECE SETUP

Source

Air

Automativ Channel Search

Digital Manual Tuning

Analogue Manual Tuning

Program Table

switching-the-television-to-

-analogue-reception

note:

Analogue channels can be selected if the

option »Air« or »Cable« has been selected.

Signal Information

Open the »Select input source« menu with

«.

Automatic Service Update

CA - Modul

Not inserted

Off

Depending on the antenna system, select the

Active Antenna Power

option »Air« or »Cable« with »v«, »Λ«, » «

or » « as the input source and press »oK«

Exit

Back

to confirm.

note:

Additional operations are explained in the

following sections.

Select the line »Scan Typ« with »

v« or »Λ«

and set the option »ATV« with » « or » «.

Start the scan with » « (red).



setting-all-analogue-television-

channels

Analogue channels are displayed in the channel

list after the digital channels.

note:

After starting the scan, a security query will

appear. Press » « (green) to confirm the



option »Yes«.

note:

– All channel and favourites lists for the ana-

logue channels will be deleted and com-

piled anew.

– The »Results« menu appears, and the scan

for TV channels begins. Depending on the

number of television channels received,

this can easily take a few minutes.

– The search is complete as soon as the »PRO-

GRAM TABLE« appears.

Plug the rooftop antenna cable (for analogue

television channels) into the »Ant-in«

socket on the television.

Open the menu with »menu«.

Select the line »SOURCE SETUP« with »

or »Λ« and press »oK« to confirm.

– The »SOURCE SETUP« menu appears.

Select the line »Source« with »v« or »

note:

and press »oK« to confirm.

You can abort the search by pressing

»menu«.

Select the option »Air« or »Cable« with » «,

» «, »

firm.

v« or »

« and press »oK« to con-

Press »menu« to end the setting.

-73

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

speCiAl-settinGs_{-----------------------------------------------------------------------------------------------------------}

note:

tuning-the-television-channels-by-

entering-the-channel-numbers

If you wish to remedy other television

channels, repeat steps 4 to 7.

Open the menu with »menu«.

8- Press »menu« to end the setting.

Select the line »SOURCE SETUP« with »

v«

or »Λ« and press »oK« to confirm.

Changing-stored-analogue-

-channels

If channels were stored with the automatic chan-

nel search while tuning the television channels,

you can delete them. You can also store chan-

nels in a different preset, change or enter the

name of a channel as well as skip channels.

– The »SOURCE SETUP« menu appears.

Select the line » Analogue Manual Tuning«

with »v« or »Λ« and press »oK« to confirm.

– The menu appears.

INSTALLATION

ANALOGUE MANUAL TUNING

selecting-a-channel-list

Program No

TSystem

Band

Open the menu with »menu«.

Select the line »SOURCE SETUP« with »

v«

or »Λ« and press »oK« to confirm.

Channel

– The »SOURCE SETUP« menu appears.

Fine Tuning

Select the line »Program Table« with » « or

48.25 MHz

Λ« and press »oK« to confirm.

– The »PROGRAME TABLE« menu appears.

note:

Auto Previous

Auto Next

Store

Additional operations are explained in the

following sections.

Select the line »Program No« by pressing »

v«

or » « and use » « or » « to save the preset.

Deleting-channels

Select »Band« by pressing »

« or »

(special channel) or »C« (normal channel).

Select the line »Channel« with » « or » « and

Λ« and

In the »PROGRAME TABLE« menu, select the

television channel to be deleted with «,

«, » « or » « and press » « (red) to con-

use »» « or » « to choose between »S«

»v



firm.

Delete the selected channel by pressing

« (yellow).

enter the channel number with » « or » « step

by step, or use »1…0« to enter the channel



number directly, or

start a automatic scan with

(green) oder



note:

(yellow)



« (blue) allows all television channels



notes:

to be deleted.

The current system is displayed in the

»System« line. If the colour or sound is

not functioning properly, select the line

Press » « (green) to confirm the deletion



process.

»System« with »

v« or »Λ«. Use » « or » «

to select the preferred setting.

If fine tuning is necessary, select the line

»Fine Tuning« with » « or » « and use » «

or » « to make the setting.

Press » « (blue) to save the setting.



-74

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

speCiAl-settinGs_{-----------------------------------------------------------------------------------------------------------}

entering-channel-names-(8-digit-

maximum)

Creating-lists-of-favourites

You can select your favourite channels and save

them in up to four favourites lists (Fav 1 to Fav 4).

In the »PROGRAME TABLE« menu, select the

television channel with » «, » «, » « or

» « and press » « (red) to confirm.

In the »PROGRAME TABLE« menu, switch



over to the list view with » « (yellow).



Open the input keyboard with » « (green).



Select the preferred channel with »

or »Λ«.

v«

note:

If necessary, delete the current channel

Use » « or » « to ”push“ the channel into

name. To do this, select the »

« button

one of the favourites lists 1 to 4 and press

»oK« to confirm.

with » « or » « and delete repeatedly using

»oK«

Select the required letters or numbers with

«, » «, » « or » « and confirm with

»oK«

– The position in the favourites list is marked

with »✔«.

– You can enter the same channel in more

than one favourite list.

– Each favourite list can store up to

255 channels.

Repeat the entry for further letters/numbers.

note:

Use the »ABC« button to switch to upper

Channels can also be deleted from favour-

case letters and use the »?@123« button to

switch to symbols and numbers.

ites lists. Select the channel to be deleted

with »

v«, »Λ«, » « or » « and delete it with

»oK«

Save the channel name by using »v«, »Λ«,

» « or » « to select »Submit« and confirm

exiting-the-settings

with »oK«

Press »menu« to end the setting.

note:

If you wish to enter other channel names,

repeat steps 1 to 4.

skipping-television-channels

You can highlight television channels to be

skipped when you select with »Λ« or »v«.

Selection is still possible using the number

buttons.

In the »PROGRAMETABLE« menu, switch over

to the list view with » « (yellow).



Select the preferred channel with »

v«

or »Λ«.

Select the column »Skip« with » « or » «

and use »oK« to mark the channel.

– The channel is marked using »✔«.

note:

Channels can also be reactivated. Select the

channel with » « or » «, then select the

column »Skip« and reactivate the channel

with »oK«

-75

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

inFormAtion_{----------------------------------------------------------------------------------------------------------------------}

Displaying-signal-information

(for digital channels only)

Open the menu with »menu«.

Select the line »SOURCE SETUP« with »

or »Λ« and press »oK« to confirm.

v«

Select the line »Signal Information« with

« or » « and press »oK« to confirm.

»v

– Information on the channel, network,

modulation, symbol rate, quality and

signal strength is displayed.

notes:

The signal information changes in accord-

ance with the current input source.

The signal properties are displayed in the

lower section of the menu. The further the

bars for »Quality« and »Signal Strenght«

extend to the right, the better the reception

signal.

The signal level not only depends on your

receiver system, but also on the channel

which is currently active. Remember this

when aligning your antenna based upon

the signal level display.

Press »menu« to close the menu.

-76

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

inFormAtion_{----------------------------------------------------------------------------------------------------------------------}

terrestrial-(DvB-t):

VHF/UHF band, Bandwidth 7 MHz

and 8 MHz

GrunDiG-32-vle-8130-sl

technical-data

FFT Size:

2k, 8k

operating-voltage:-

Modulation:

16QAM, 64QAM, QPSK

220–240 V, , 50–60 Hz

Guard Interval: 1/4, 1/8, 1/16, 1/32

power-consumption:

On mode 58 W

Standby <0.50 W

terrestrial-(DvB-t2):

VHF/UHF band, Bandwidth 7 MHz

and 8 MHz

energy-efficiency-class:

FFT Size:

Modulation:

1k, 2k, 4k, 8k, 16k, 32k

16QAM, 64QAM,

256QAM, QPSK

maximum-power-consumption

On mode 110 W

Guard Interval: 1/4, 19/256, 1/8, 19/128,

1/16, 1/32, 1/128

Annual-power-consumption

85 kWh

As this feature is optional, it is not available in

all products.

Audio-output:-

2 x 20 W music power output

2 x 10 W Sine wave power

Analogue-reception-ranges:

C02 ... C80, special channels S01 ... S41

preset-channels:-

rohs-limits: Pb (Lead)/Hg (Mercury)

All Channels 6000 (Satellite – DVB-S),

1000 (Cable – DVB-C) or

99 (Analogue)

Pb meets ROHS directive / 0 mg

peak-luminance-ratio:

65 %

1000 (Terrestrial – DVB-T) or

99 (Analogue)

9 AV, 2 USB

Default-satellite:

screen-(dm²):

28 dm²

screen-size:

80 cm/32 inch

lnB-power-supply:

13/18 V, 14/19 V optional, maximum 450 mA

lnB-switching-signal:

0/22 kHz 650mV +/- 250mVpp

maximum-resolution:

WUXGA, 1920 x 1080

DiseqC:

1.0-operation, 1.1-operation, 1.2-operation

weight:

approx. 13 kg

Digital-reception-ranges

satellite:

Dimensions:

W H D 76,3 cm x 53,5 cm x 4,3 cm

Ku band:

10,700 MHz – 12,750 MHz

Modulation: DVBS QPSK, DVBS2 QPSK,

8 PSK

IF band:

950 MHz – 2,150 MHz

Signal level: -25dBm to -65 dBm

Cable:

Overall band: 110 MHz – 862 MHz

Modulation:

16QAM, 32QAM, 64QAM,

128QAM and 256QAM

Symbol rate: 4.0 Msym/s to 7.4 Msym/s

Technical changes and errors reserved.

-77

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

inFormAtion_{----------------------------------------------------------------------------------------------------------------------}

For-customers-in-russian

1.-srD-with-FHss-modulation

service-information-for-dealers

Only operate the

television with the

power supply/power

cord provided.

Maximum 2.5 mW e.i.r.p.

Maximum 100 mW e.i.r.p. Permitted for use

SRD for outdoor applications without restric-

tion on installation height only for purposes of

gathering telemetry information for automated

monitoring and resources accounting systems.

Permitted to use SRD for other purposes for

outdoor applications only when the installa-

tion height is not exceeding 10 m above the

ground surface.

The product complies with the following EU di-

rectives:

Power consumption values and classes are speci-

fied according to the regulations 2009/642 and

2010/1062 and the standards EN62087 and

EN62301 as per European Union framework di-

rectives 2009/125/EC and 2010/30/EU.

Maximum 100 mW e.i.r.p. Indoor applica-

tions.

With this note, Grundig declares that this appli-

ance is in conformity with the main and other rel-

evant terms of the 1999/5/EC directive.

2.-srD-with-Dsss-and-other-than-FHss-

wideband-modulation-

To obtain a copy of the Declaration of Confor-

mity (Doc), please submit your request by using

the contact information at www.grundig.com/

download/doc

Maximum mean e.i.r.p. density is 2 mW/

MHz. Maximum 100 mW e.i.r.p.

Maximum mean e.i.r.p. density is 20 mW/

MHz. Maximum 100 mW e.i.r.p. Permitted to

use SRD for outdoor applications only for pur-

poses of gathering telemetry information for

automated monitoring and resources account-

ing systems or security systems.

Maximum mean e.i.r.p. density is 10 mW/

MHz. Maximum 100 mW e.i.r.p. Indoor ap-

plications.

This appliance can be operated in the following

European countries.

AT BE BG CH CY CZ DE DK

EE ES FI

IS IT LI

FR GB GR HU IE

LT LU LV MT NL

NO PL PT RO SE SI SK TR

For-customers-in-ukraine

e.i.r.p. ≤100 mW with built-in antenna with am-

plification factor up to 6 dBi.

This appliance can also be operated in countries

outside Europe.

Please observance the restrictions for the follow-

ing countries:

environmental-note

This product has been made

from high-quality parts and

For-customers-in-France

Outdoor use limited to 10 mW e.i.r.p. within the

band 2454-2483.5 MHz. Military Radioloca-

tion use. Refarming of the 2.4 GHz has been

ongoing in recent years to allow current relaxed

regulation. Full implementation planned 2012.

materials which can be re-used

and recycled.

Therefore, do not dispose of the product along

with normal household waste at the end of its

service life. Take it to a collection point for the

recycling of electrical and electronic equipment.

Dispose of the used device at a collection point

for electrical and electronic equipment. The sym-

bol on the product, in the operating manual or on

the packaging indicates that recycling is possible.

Information on collection points is available from

your local authorities.

For-customers-in-italy

For private use, a general authorisation is re-

quired if WAS/RLAN’s are used outside own

premises. For public use, a general authorisation

is required.

For-customers-in-norway

This subsection does not apply for the geograph-

ical area within a radius of 20 km from the cen-

tre of Ny-Ålesund.

Help protect the environment by recycling used

products.

-78

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

inFormAtion_{----------------------------------------------------------------------------------------------------------------------}

troubleshooting

If the information provided below does not help, please consult an authorised GRUNDIG dealer.

Please bear in mind that malfunctions can also be caused by external devices such as video recorders

or satellite receivers.

problem

possible-cause

remedy

Screen lit (snow), but no station

visible

Antenna cable

Is the antenna cable connected?

No TV channel tuned

Start a channel scan

Insuﬃcient contrast in picture

The picture settings are not correct

Adjust the brightness, contrast or colour

setting

Problem at station

Try another channel

Picture and/or sound distorted

Ghosting, reﬂection

Interference from other devices

Place the device in a diﬀerent position

Channel setting

Antenna

Automatic or manual tuning/ﬁne tuning

Have antenna cable or system checked

Turn up the colour

No colour

Colour intensity too low

Adjust TV standard (if setting option is

available)

Select the correct colour standard

Problem at station

Try a diﬀerent channel

Picture but no sound

Volume is set to a minimum

Turn up or switch on the volume

Teletext impaired or absent

Problem at station

Try a diﬀerent channel

Television channel (no teletext)

or antenna system

Try with a diﬀerent TV channel,

carry out ﬁne tuning

Station signal too weak

Check antenna

The remote control does

not work

Obstacle between remote control and

device.

Point remote control at television

Battery problem

Check batteries and replace if

necessary

Operating mode undeﬁned

Switch oﬀ the television at the mains

switch for two minutes

Picture too dark in PC mode

Incorrect setting for picture resolution

and picture frequency on the PC

Change settings on the PC

(e.g. 1280 x 768 resolution,

refresh rate 60 Hz)

DMS device cannot be found DMS device is not switched on or

not started

Make sure that the DMS device is on

and operating.

Network connection settings are not

made.

Check the network settings.

-79

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

inFormAtion_{----------------------------------------------------------------------------------------------------------------------}

problem

possible-cause

remedy

Low image quality (pixel) in

WLAN mode

Signal is lost based on structural

conditions.

Place the modem so that the signal to

the television is not interrupted.

Internet connection speed low.

Low Internet speed is a problem that

is related with the speed of your sub-

scription or a failure in the Internet in-

frastructure. Contact with your service

provided (ISP).

DMS (for example PC) is connected

to the wireless network and away

from the modem

Bring your DMS closer to the modem

Warnings about the connec-

tion problems on the display

Network Cable or wireless USB net-

work device may be disconnected

Check network cable or wireless USB

network device

Modem does not have Internet con-

nection or has problems

Make sure that your modem has In-

ternet connection

Videos in video aplications

are lagging during playback

in wired connection

Internet connection speed low

Low Internet speed is a problem that

is related with the speed of your sub-

scription or a failure in the Internet in-

frastructure. Contact with your service

provided (ISP).

There are connection prob-

lems in inter@ctive applica-

tions

This may occur due to temporary

problems in servers of these applica- again

tions

Try connecting to the applications

note:

This is a Class A product. During operation the device can cause radio interference. In this case

the user may have to remedy this. Please contact your specialist dealer.

-80

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

Hamilton Beach Can Opener 76607 User Manual
Harbor Freight Tools Automobile Accessories 97214 User Manual
Havis Shields Laptop Docking Station DS PAN 411 User Manual
Hotpoint Washer WMYF 842 User Manual
HP Hewlett Packard Stereo System 8660c User Manual
Humminbird Personal Computer HS 7238 User Manual
Husky Indoor Furnishings TREF1736D User Manual
IBM Computer Monitor L190P User Manual
IBM Laptop MT 8747 User Manual
IBM Network Card 501 User Manual