Grundig Electric Shaver MT 6740 User Manual

4 IN 1 MULTI  
HAIR TRIMMER  
MT 6740  
Download from Www.Somanuals.com. All Manuals Search And Download.  
_________________________________________________________  
DEUTSCH  
ENGLISH  
FRANÇAIS  
PORTUGUÊS  
ESPAÑOL  
POLSKI  
4- 17  
18 - 29  
30 - 41  
42 - 53  
54 - 65  
66 - 77  
78 - 89  
90 - 101  
102 - 113  
ČESKY  
TÜRKÇE  
ΕΛΛΗΝΙΚA  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
_______________________________________________  
SAFETY  
7
Please note the following instructions  
when using the appliance:  
Always disconnect the power  
supply unit if the appliance is  
not being charged or used.  
7
The appliance is designed for  
7
domestic use only.  
If not already present, for addi-  
tional protection it is recommend  
to install a residual-current-oper-  
ated protective device (RCD)  
with a rated residual operating  
current not exceeding 30 mA in  
the electrical circuit of your bath-  
room. Ask your electrician for  
advice.  
7
Observe these instructions in  
order to prevent damage to the  
appliance or danger arising  
from improper use. Keep them  
in a safe place.  
7
Never use the appliance in the  
bath, shower or over a wash  
basin filled with water; nor  
should it be operated with wet  
hands.  
7
7
7
Never use the appliance if it is  
visibly damaged.  
Keep the appliance away from  
children.  
Do not open the appliance  
under any circumstances. No  
warranty claims are accepted  
for damage caused by incorrect  
handling.  
7
Do not immerse the appliance in  
water or let it come into contact  
with water, even during  
cleaning.  
7
Do not drop the appliance.  
ENGLISH  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
__________________________________________  
OVERVIEW  
See the illustrations on page 2.  
H
Extendable plug-in comb  
system suitable for both cutting  
widths, with precise trimming  
grade display for hair lengths  
of 2, 4, 6, 8, 10, 12, 14 and  
16 mm.  
Controls  
A
Professional cutting head  
made from industrial ceramic  
(width 38 mm).  
B
Side catches for removing  
attachments.  
I
Thinning comb for 2 mm  
cutting length.  
C
On/off switch.  
J
Shaving attachment with single  
blade foil for a smooth shave.  
D
Charging display (LED). Lights  
up red when charging and  
green when it is fully charged.  
K
Power supply unit.  
Other accessories  
E
F
Socket for plugging into the  
charging unit or connecting the  
power supply unit.  
1 x two combs.  
1 x cleaning brush.  
1 x oil for cutting head.  
Charging unit.  
Accessories  
G
Beard trimming attachment  
(width 30 mm).  
ENGLISH  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
___________________________________  
POWER SUPPLY  
7
Charging time is approx. 12  
hours when the appliance is  
switched off. If you switch on the  
appliance while it is charging,  
charging will stop.  
Rechargeable battery  
operation  
When operating the appliance with  
the built-in nickel metal hydride  
battery, only use the power unit  
supplied for charging.  
D
– The charging display  
pears.  
disap-  
Check if the mains voltage on the  
type plate of the power supply unit  
supplied corresponds to your local  
mains supply.  
7
7
The ambient temperature should  
be between 5 °C and 40 °C.  
When fully charged, the appliance  
works for around 60 minutes.  
It is not advisable to charge the  
batteries after every use, especially  
if you do not use the appliance for  
the full 60 minutes. Only charge  
the batteries when they are  
completely discharged. This  
increases their service life. Do not  
charge it every day.  
1 Plug the power cord into the  
E
appliance socket  
and the  
power supply unit into the wall  
socket.  
Notes  
7
Charge up the batteries comp-  
letely before you use them for the  
first time or if you have not used  
them for a long time (approx. 12  
hours’ timer-controlled charging).  
D
– The charging display  
lights  
up red when charging and  
changes to green when it is  
fully charged.  
ENGLISH  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
___________________________________  
POWER SUPPLY  
Using the charging unit  
E
Mains operation  
(with the power supply  
1 Put the socket  
of the  
unit)  
appliance into the charging unit.  
2 Plug the power cord into the  
Check if the mains voltage on the  
type plate of the power supply unit  
supplied corresponds to your local  
mains supply.  
socket on the charging unit.  
3 Plug the power supply unit into  
the wall socket.  
The only way to disconnect the  
device from the mains is to unplug  
the power supply unit.  
1 Plug the power supply unit into  
E
the socket  
on the appliance.  
2 Plug the power supply unit into  
the wall socket.  
Caution  
7
When in the bathroom or beside  
a water connection, you must  
only use the appliance in battery  
mode; never run it from the  
mains.  
ENGLISH  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
________________________________________  
Function 1  
OPERATION  
Special features  
This appliance has four separate  
functions:  
Trimming hair ...  
... using the ceramic cutting head  
– Function 1: precise hair trimming  
at a width of 38 mm.  
A
(width 38 mm).  
– Function 2: precise beard  
trimming at a width of 30 mm.  
– Function 3: hair or beard  
trimming with various cutting  
lengths (2, 4, 6, 8, 10, 12, 14,  
16 mm) at widths of 38 mm or  
30 mm.  
– Function 4: close shaving.  
1 If necessary, remove the attach-  
ment by pressing in both side  
B
Switching on and off  
catches  
and lifting off.  
A
2 Insert ceramic cutting head  
C
1 Press the button  
to switch on  
carefully at the top and press  
down until it clicks into place.  
the appliance.  
C
2 Press the button  
to switch off  
3 Place a towel around the neck  
and shoulder of the person  
the appliance.  
whose hair you are trimming.  
ENGLISH  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
________________________________________  
OPERATION  
4 Make sure the person is seated  
Function 2  
so that their head is roughly at  
your eye level. Before trimming, Beard trimming ...  
comb the hair so that it falls  
naturally and you can see the  
direction in which it grows.  
... using the beard trimming attach-  
G
ment  
(width 30 mm).  
1 If necessary, remove the attach-  
ment by pressing in both side  
B
catches  
and lifting off.  
2 Insert beard trimming  
G
attachment  
carefully at the  
top and press down until it clicks  
into place.  
3 Loosen the beard hair by comb-  
ing the beard in the direction the  
hair grows.  
ENGLISH  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
________________________________________  
OPERATION  
Function 3  
3 Push the extendable attachment  
H
carefully and firmly onto the  
Trimming hair or beards  
at certain cutting  
lengths ...  
rounded rear half of the cutting  
head from above and let it click  
into place.  
4 Adjust the cutting length (2, 4,  
6, 8 or 10 mm) by pressing on  
the lock next to the cutting  
length display and then move  
the comb to the setting you  
want.  
... using the extendable attachment  
.
H
5 After use, remove extendable  
H
attachment  
by pressing the  
locking tab at the back.  
1 If necessary, remove the attach-  
ment by pressing in both side  
B
catches  
and lifting off.  
A
2 Insert attachment  
(width  
(width 30 mm)  
G
38 mm) or  
carefully at the top and press  
down until it clicks into place.  
ENGLISH  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
________________________________________  
Note  
OPERATION  
Function 4  
7
You can remove the single blade  
foil of the shaving attachment. To  
do this, press both side catches  
on the shaving attachment. Clean  
the blade head with the cleaning  
brush supplied.  
Close shaving ...  
... using the shaving attachment  
J
.
1 If necessary, remove the attach-  
ment by pressing in both side  
B
catches  
and lifting off.  
J
2 Insert shaving attachment  
carefully at the top and press  
down until it clicks into place.  
Note  
7
Do not apply a lot of pressure  
when shaving, as this could  
damage the single blade foil.  
ENGLISH  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
________________________________________  
OPERATION  
I
Function 5  
3 Push the thinning comb  
care-  
fully and firmly onto the rounded  
rear half of the cutting head  
from above and let it click into  
place.  
Thinning out hair ...  
... using the thinning comb  
(thinning at a length of 2 mm).  
I
4 After use, remove thinning comb  
I
by pressing the locking tab  
at the back.  
1 If necessary, remove the attach-  
ment by pressing in both side  
B
catches  
and lifting off.  
A
2 Insert attachment  
(width  
(width 30 mm)  
G
38 mm) or  
carefully at the top and press  
down until it clicks into place.  
ENGLISH  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
___________________________  
CLEANING AND CARE  
3 Use a soft, dry cloth or the brush  
supplied to clean the appliance  
housing and the charging unit.  
Cleaning and care  
1 Switch off the appliance and  
unplug it from the mains.  
Caution  
2 Remove the attachment and  
clean the blade head with the  
brush supplied.  
7
Never put the appliance, charging  
unit or power supply unit in water  
or any other liquid.  
Caution  
If cleaning with the brush is not  
sufficient, you can also rinse the  
attachment under running water.  
However, only do this once the  
4 Before using the appliance  
again, dry all the attachments  
properly using a soft towel.  
7
5 Do not use any cleaning agents.  
attachment has been removed.  
Note  
7
Remove any clippings after each  
use.  
7
The cutting head on the attachment  
does not normally need to be  
oiled. If you clean the attachment  
under running water regularly but  
you also want to maintain the  
original condition of the cutting  
head for as long as possible, it is  
worth oiling it at regular intervals  
with the oil provided.  
ENGLISH  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
___________________________  
Environmental note  
CLEANING AND CARE  
Storage  
If you do not want to use the appli-  
ance for a long period of time,  
please store it carefully.  
This product has been made from  
high-quality parts and materials  
which can be re-used and recycled.  
1 Make sure it is unplugged, has  
completely cooled down and all  
the accessories are completely  
dry.  
Therefore, do not throw the product  
away with normal household waste  
at the end of its service life. Take it  
to a collection point for recycling  
electrical and electronic devices.  
This is indicated by this symbol on  
the product, in the operating  
2 Store the parts in the original  
box in a cool, dry place.  
3 Make sure the appliance is kept  
manual and on the packaging.  
out of reach of children.  
Please find out about collection  
points operated by your local  
authority.  
Help protect the environment by  
recycling used products.  
ENGLISH  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
____________________________________  
INFORMATION  
Technical data  
This product fulfils the  
European directives  
2004/108/EC and  
2006/95/EC.  
Power supply  
Batteries: Nickel metal hydride  
Power supply unit  
Ni-MH  
Technical and design modifications reserved.  
ENGLISH  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Grundig Multimedia B.V.  
Atrium, Strawinskylaan 3105 NL-1077 ZX Amsterdam http://www.grundig.com  
72011 903 8000  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Paint Sprayer T23092 User Manual
Harman Kardon DVD Player 38 User Manual
Hasbro Games 59917 User Manual
Heath Zenith Door 3106978 AC 6196 User Manual
Honeywell Thermostat CM921 User Manual
HP Hewlett Packard Personal Computer BL465C G7 User Manual
HP Hewlett Packard Switch SB Series User Manual
Hubbell Switch LXi 1300 User Manual
Husqvarna Brush Cutter TS 500 M User Manual
IBM Computer Drive 71P7279 User Manual