Grundig CRT Television VISION 7 37 7952 T User Manual

COLOR TELEVISION

VISION 7 37-7952 T

VISION 7 42-7952 T

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS_{------------------------------------------------------------------------------------------------}

USING EXTERNAL DEVICES

DVD player, DVD recorder, video recorder or set-top box

High deﬁnition – HD ready

Connecting a DVD player, DVD recorder, video recorder or set-top box

Headphones

Decoder or satellite receiver

Camcorder

Hi-ﬁ system/AV receiver

PC MONITOR MODE

Connecting a PC

Selecting the channel position for the PC

Settings for the PC

OPERATION WITH COMMON INTERFACE

Inserting the CA module

Access control for CA module and smart card

SPECIAL SETTINGS

Tuning digital television stations

Tuning analogue television stations

Changing stored channels for analogue stations

INFORMATION

Displaying signal information

Updating software

Dismantling the stand of the unit

Technical data

Service information for dealers

Environmental note

Troubleshooting

Additional Information for units sold in the UK.

Download from Www.Somanuals.com. All Manuals Search And Download.

SET-UP AND SAFETY_{------------------------------------------------------------}

Please note the following information when setting up your television

set.

This television set is designed to receive and display video and audio

signals.

Any other use is expressly prohibited.

External light falling on the screen impairs picture quality.

To assure suﬃcient ventilation make sure there is enough space

around it in the wall unit.

The television set is designed for use in dry rooms. If you do use it in

the open, please ensure that it is protected from moisture, such as

rain or splashing water. Do not expose the television set to any mois-

ture.

Do not place any vessels such as vases on the television, as they may

spill liquid, thus presenting a safety risk.

Place the television set on a solid, level surface. Do not place any

objects such as newspapers on the television set or cloth or similar

items beneath it.

Do not place the television set close to heating units or in direct sun-

light, as this will impair cooling.

Heat build-up can be dangerous and shortens the operating life of

the television set. For reasons of safety, have a specialist remove any

dirt deposits in the set from time to time.

Do not open the television set under any circumstances. Warranty

claims are excluded for damage resulting from improper handling.

Make sure the power cord or the power supply unit (if provided) are

not damaged.

The television set may only be operated with the mains cable/

adapter supplied.

Thunderstorms are a danger to all electrical devices. Even if the

television set is switched oﬀ, it can be damaged by a lightning strike

to the mains or the antenna cable. Always disconnect the mains and

antenna plugs during a storm.

Clean the screen with a soft, damp cloth. Only use plain water.

Only clean the television housing with the cloth provided. Only use

plain water.

Please note when deciding where to put the device that furniture

surfaces are covered by various types of lacquer and plastic, most

of which contain chemical additives. These may cause corrosion to

the feet of the device, thus resulting in stains on the surface of the

furniture which can be diﬃcult or impossible to remove.

Download from Www.Somanuals.com. All Manuals Search And Download.

SET-UP AND SAFETY_{------------------------------------------------------------}

The screen of your LCD television meets the highest quality

standards and has been checked for pixel faults.

Despite the great care taken in manufacturing, technological

reasons make it impossible to completely discount the possibility that

some pixels may be faulty.

Provided they are within the thresholds speciﬁed by the DIN norm,

pixel faults of this kind cannot be regarded as a defect as deﬁned by

the warranty.

Notes:

Do not connect any other equipment while the device is switched

on. Switch oﬀ the other equipment as well before connecting it.

Only plug the device into the mains socket after you have con-

nected the external devices and the antenna.

Make sure the power plug is freely accessible.

Caution:

If you want to use a wall bracket for your television, make sure

you read the assembly instructions for the wall bracket carefully

or have your specialist dealer mount it for you.

When buying the wall bracket, make sure that all the fastening

points needed on the television are there on the wall bracket and

that they are all used when it is mounted.

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL INFORMATION_{----------------------------------------}

Special features of your television

Your television set enables you to receive and watch digital stations

(via DVB-T), including in High Deﬁnition (HD).

At present, reception for these digital television stations in High Deﬁ-

nition is only possible in some countries in Europe.

This television can receive and process all analogue and all

unencrypted digital stations. This television set has an integrated

digital and analogue receiver. The digital receiver unit converts the

signals from digital stations to provide outstanding audio and picture

quality.

The TV guide (only for digital stations) tells you of any schedule

changes at short notice, and provides an overview of all the stations’

schedules for the next few days.

Detailed information on the individual stations – if it is provided by

the broadcaster – is also available in the electronic programme

guide.

You can connect various data media, for example, an external hard

drive, a USM memory stick or a digital camera to the USB socket.

Using the ﬁle browser, you can then select and play the ﬁle formats

you want (for example, MP4, MP3 or JPEG data).

Receiving digital stations

To receive digital stations you need a digital rooftop or indoor an-

tenna (passive or active indoor antenna with its own power supply).

Unlike analogue broadcasting, not every station has its own trans-

mission frequency. Instead, several stations are grouped into what

are known as bouquets on a regional or national level.

You can ﬁnd the current transmission information on teletext from var-

ious broadcasters, or look in a TV guide or on the Internet.

What is Common Interface?

Common Interface (CI) is an interface for DVB receivers.

Encoded stations can only be viewed with a CA module suitable for

the encoding system and the corresponding smart card.

The television set is equipped with a Common Interface slot into

which CA modules from various providers can be inserted.

You can insert the provider’s smart card into the CA module in order

to enable the encrypted stations you want to see.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTION/PREPARATION _{----------------------}

Connecting the antenna and the mains cable

1 Plug the cable of the rooftop or indoor antenna (passive or

active indoor antenna with its own power supply for digital tele-

vision stations) into the antenna socket »ANT IN« on the tele-

vision set;

plug the rooftop antenna cable (for analogue television stations)

into the »ANT IN« socket on the television.

Note:

When connecting an indoor antenna you may have to try it out

at diﬀerent positions until you get the best reception.

2 Plug the mains cable supplied into the »AC IN« mains socket of

Vision 37

Vision 42

the television.

3 Plug the mains cable into the wall socket.

Note:

Only plug the device into the mains socket after you have

connected the external devices and the antenna.

Only connect the television using the power cord supplied to a

suitable earthed safety socket.

Do not use an adapter plug or extension lead which does not

meet the applicable safety standards. Do not tamper with the

power cord.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTION/PREPARATION _{----------------------}

Inserting batteries in the remote control

1 Open the battery compartment by removing the lid.

2 Insert the batteries (3 x 1.5 V micro for example R03 or AAA).

Observe the polarity (marked on the base of the battery com-

partment).

3 Close the battery compartment.

Note:

If the television no longer reacts properly to remote control

commands, the batteries may be ﬂat. Be sure to remove used

batteries.

The manufacturer accepts no liability for damage resulting from

used batteries.

Environmental note

Batteries, including those which contain no heavy metal, may not

be disposed of with household waste. Please dispose of used

batteries in an environmentally sound manner. Find out about the

legal regulations which apply in your area.

Download from Www.Somanuals.com. All Manuals Search And Download.

OVERVIEW _{----------------------------------------------------------------------------------------------}

Connections on the television

USB

USB socket for external data media.

Audio signal input for camcorder.

L R

S-VHS

Video

Video signal input for S-Video camcorder.

Video signal input for camcorder.

Headphone connection (3.5 mm jack plug).

Common Interface slot.

HDMI3

HDMI2

HDMI1

HDMI socket, audio/video signal input (HDMI).

COMPONENT

INPUT

Y Pb Pr

Video signal input (YUV signal).

Audio signal input (YUV signal).

AUDIO IN LR

SPDIF OUT

Audio output sockets (coaxial) for PCM/AC3

signals. For connecting to a digital multi-channel

audio/video ampliﬁer or AV receiver.

PC-IN VGA

PC AUDIO IN

ANT IN

VGA socket, video signal input for PC.

Audio signal input for PC.

Antenna socket.

SCART

Euro/AV socket (FBAS signal, RGB signal).

Socket for the mains cable.

AC IN

Download from Www.Somanuals.com. All Manuals Search And Download.

OVERVIEW _{----------------------------------------------------------------------------------------------}

Controls on the television

Note:

The sensor button »8« is always lit. The symbols of the other sensor buttons

light up brieﬂy if you brush your hand over the control panel. To operate,

brieﬂy tap the respective button symbol.

Adjust the volume;

select menu functions.

Opens the pre-selection for AV channels.

Press »

Λ« or »V« in the menu,

conﬁrm with » « or » «.

Opens the main menu.

Select the menu item with »

Λ« or »V«;

activate the function with » « or » «;

set the function with » « or » «;

switch oﬀ the menu with »M«.

Λ V

Switch on the television from standby;

select the station in steps;

select a function in the menu.

Switches the television on and back into standby mode.

The only way to disconnect the television from the mains is

to pull out the plug.

Download from Www.Somanuals.com. All Manuals Search And Download.

OVERVIEW _{----------------------------------------------------------------------------------------------}

The remote control

Switches oﬀ the television set (stand-by).

1...0

Switches the television on from standby mode

Selects channels directly.

Opens the pre-selection for AV channels and the

USB input.

Then select with »V« or »Λ«.

Displays the number and name of a station;

reveals answers in teletext mode.

PIP

Updates the page in teletext mode.

Switches between picture formats.

Sound on/oﬀ (mute).

Opens the menu.

Zapping function;

switches the menus back one menu level.

Λ V

Switches the television on from standby;

selects stations step by step;

moves the cursor in the menus up and down.

Calls up the channel list;

activates various functions.

(OK)

– +

Adjusts the volume;

moves the cursor left/right.

TXT

TV-G

Switches between teletext and TV modes

Opens the electronic TV guide.

Selects various picture settings;

selects a page in teletext mode.

Displays the time;

selects a page in teletext mode.

Freeze-frame;

selects a page in teletext mode.

Selects diﬀerent sound settings (in analogue TV

operation);

selects diﬀerent languages (in digital TV opera-

tion);

selects desired topic in teletext mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

OVERVIEW _{----------------------------------------------------------------------------------------------}

SCAN

Enlarges the picture;

switches to double character size in teletext mode.

PAT

Selects the split screen function in teletext mode.

Selects diﬀerent subtitles (in digital TV operation);

selects subpages in teletext mode.

Selects channel lists (»All Channels«, »RADIO«,

»FAV1« to »FAV4«);

page hold in teletext mode.

Switches to operation of a GRUNDIG

digital receiver, GRUNDIG digital receiver with

hard disk (PDR), GRUNDIG DVD player,

GRUNDIG DVD recorder or GRUNDIG

AV receiver.

Press »M« until the »DR«, »DVD« or »AMP«

display lights up.

Then select the one you want.

If you do not press a button within 10 seconds,

the remote control returns to television mode

(»TV«).

Note:

»DR« has been programmed for operating a

GRUNDIG digital receiver (remote control

level 1).

»DVD« has been programmed for operating a

GRUNDIG DVD player.

»AMP« has been programmed for operating a

GRUNDIG AV receiver.

The functions available depend on the model of

the device you are using.

Just try it out.

You can change this programming:

Press and hold down »M« and press three

number buttons to enter the code:

»1«, »2«, »3« for a GRUNDIG DVD player.

»4«, »5«, »6« for a GRUNDIG DVD recorder.

»1«, »4«, »7« for a GRUNDIG digital receiver

(remote control level 1).

»2«, »5«, »8« for a GRUNDIG digital receiver

(remote control level 2).

»3«, »6«, »9« for a GRUNDIG digital receiver

with a hard disc (PDR).

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS_{----------------------------------------------------------------------------------------------------}

Searching for television stations

The television has an automatic tuning function, which ﬁrst searches

for digital TV channels and then analogue ones.

You start the search and can then sort the television stations into your

order of preference.

There are 400 presets for digital channels and 99 for analogue

channels, to which you can assign TV stations from the antenna or

from the cable connection (analogue channels).

1 Press »8«, »1…0« or »V« or »Λ« to switch on the television from

Installation

standby mode.

Menüsprache

Deutsch

Aus

– The »Installation Guide« menu appears when the device is ﬁrst

switched on.

Aktivantenne

Programmsuchlauf

2 Press » « or » « to select the language.

–

Auswählen

Ende

Help:

If the »Installation Guide« menu does not appear on the screen,

make the setting by following the instructions on returning the tel-

evision to its factory condition on page 26.

Note

The antenna power supply may only be switched on if the an-

tenna is actually an active indoor antenna with a signal ampliﬁer

and it is not already supplied with a voltage via a mains plug

(or similar supply).

Otherwise you may cause a short circuit and irreparably damage

your antenna.

Installation Guide

Language Settings

English

Off

Active Antenna Power

Auto Tuning

3 Select the »Active Antenna Power« with »

V« or »Λ«.

Press » « or » « to switch on the antenna voltage (»On«).

–

Select

Exit

4 Select »Auto Tuning« with »

V« or »Λ« and conﬁrm with »G«.

– »Country Selection« is active.

5 Press » « or » « to select the country.

–

Please select country and scan type, then press OK to start tuning

Country Selection

Scan Type

Deutschland

ATV & DTV

6 Select the »Scan Type« with »

V« or »Λ«.

Press » « or » « to select whether you want to search for only

–

Time Zone

Berlin GMT+1

digital television stations (DTV), only analogue television stations

(ATV) or both (ATV & DTV).

7 Select »Time zone« with »

V« or »Λ«.

Searching...

Press » « or » « to select time zone.

–

GGGGGGGGGGGGGGGG

57 %

ZDF

UHF

CH49

DTV

8 Press »G« to start the search.

DTV

ZDFinfokanal

SAT.1

– The »Searching...« menu appears, and the search for TV

stations begins. This may take several minutes depending on

the number of television stations received.

N24

ProSieben

kabel eins

– The search is ended when the »Programme Table« appears.

Skip

Exit

Note:

The search can be ended prematurely with »i«.

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS_{----------------------------------------------------------------------------------------------------}

Changing stored channels for digital stations

You can change the order of the channels found as required, delete

channels you do not need and block access to certain presets

(parental control).

Press » « (blue) to switch between »Programme Table – ALL TYPE«,

»Programme Table – DTV«, »Programme Table – RADIO« and »Pro-

gramme Table – ATV«.

Press » « (red) to display the channels assigned to a network.

Press »P« to switch the channel list to the next page, press »S« to

switch it back to the previous page.

Opening the channel list

1 Open the menu with »i«.

CHANNEL SETUP

– The »PICTURE« menu is displayed.

Auto Tuning

Digital Manual Tuning

Analogue Manual Tuning

Programme Table

Signal Information

CA - Module

2 Select the »CHANNEL SETUP« menu with » « or » «.

–

3 Select »Programme Table« with »

with »G«.

V« or »Λ« and conﬁrm

Not Inserted

– The »Programme Table« menu is displayed.

Active Antenna Power

Back

Exit

Select

Moving channels to diﬀerent presets

1 In the »Programme Table« menu, press »V« or »Λ« to se-

Programme Table

ALL TYPE

All Networks

lect the channel to be moved.

Service Type

Network

CHANNEL SETUP

CA FAV1 FAV2 FAV3 FAV4

2 Press »¥« (green) to highlight the channel.

DTV

1 Das Erste

DTV

2 ZDF

3 Enter the new presets with one, two or three digits using

»1…0«.

DTV

3 RTL Television

DTV

4 SAT.1

DTV

New position

5 ProSieben

6 VOX

4 Press »G« to conﬁrm the entry.

7 RTL2

Notes:

8 kabel eins

9 Super RTL

To sort the other television channels, repeat steps 1 to 4.

New position

Back

Exit

Stations that are assigned to ﬁxed preset numbers (such as

French stations with LCN coding) cannot be moved.

Select

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS_{----------------------------------------------------------------------------------------------------}

Creating a list of favourites

You can select your favourite channels and save them in up to

four lists (FAV1 to FAV4).

Programme Table

ALL TYPE

All Networks

Service Type

Network

CHANNEL SETUP

CA FAV1 FAV2 FAV3 FAV4

1 In the »Programme Table« menu, select the television

channel with » « or » «.

DTV

Das Erste

ꢀ

DTV

2 ZDF

DTV

3 SAT 1

2 “Push” the television channel with » « or » « into the

–

DTV

4 ProSieben

DTV

5 3sat

favourites list 1 to 4 and save it with »G«.

DTV

6 kabel eins

– The position in the favourites list is marked with »ꢀ«.

– You can enter the same channel in more than one

favourites list.

DTV

7 WDR 3

DTV

8 N24

DTV

9 Doku

Network

Delete

Move

Back

Exit

Note:

Service Type

Select

Prev. Page

You can delete channels from the favourites list. Press »

V«

oder »Λ« and » « or » « to select the channel and »G«

–

to delete it.

Deleting channels

1 In the »Programme Table« menu, press »V« or »Λ« to

Programme Table

ALL TYPE

All Networks

select the channel to be deleted and press »3« (yellow) to

Service Type

Network

conﬁrm.

CHANNEL SETUP

CA FAV1 FAV2 FAV3 FAV4

DTV

1 Das Erste

DTV

2 ZDF

2 Press »¥« (green) to conﬁrm the deletion.

DTV

3 SAT 1

DTV

Notes:

4 ProSieben

DTV

5 3sat

Press » « (red) to delete all the channels.

DTV

6 kabel eins

DTV

7 WDR 3

Presets whose channels have been deleted are no longer

shown in the »Programme Table«.

DTV

8 N24

DTV

9 Doku

Network

Delete

Move

Back

Exit

Service Type

Select

Prev. Page

Skipping television stations

You can highlight television stations to be skipped when you se-

Programme Table

ALL TYPE

All Networks

lect with »

V« or »Λ«. It is still possible to select using the num-

Service Type

Network

CHANNEL SETUP

ber buttons.

CA FAV1 FAV2 FAV3 FAV4

DTV

1 Das Erste

1 In the »Programme Table« menu, select the television chan-

nel with » « or » «.

DTV

2 ZDF

DTV

3 SAT 1

DTV

4 ProSieben

DTV

2 Press » « to switch to the »-« symbol and press »G« to

5 3sat

DTV

6 kabel eins

highlight the television channel.

DTV

7 WDR 3

– The channel is marked with »^-«.

DTV

8 N24

DTV

9 Doku

Note:

Network

Delete

Move

Back

Exit

Channels can be enabled again. Press »V« or »Λ« to

Service Type

Select

Prev. Page

select the channel, press » « to switch to the symbol »-«

and press »G« to enable the channel again.

Ending the settings

1 Press »i« to ﬁnish the settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS_{----------------------------------------------------------------------------------------------------}

Picture settings

1 Open the menu with »i«.

– The »PICTURE« menu is displayed.

2 Select »Picture Mode«, »Brightness«, »Contrast«, »Colour«,

PICTURE

»Sharpness« or »Colour Temperature« with »V« or »Λ«.

Picture Mode

Brightness

Contrast

Vivid

GGGGGGGG

Select the value with » « or » « and conﬁrm with »G«.

–

GGGGGGGGGGGGGG

GGGGGGGGGG

GGGGGGGGG

Notes:

Colour

Other settings can be found on the second page of the

»PICTURE« menu.

Sharpness

Colour Temperature

Medium

3 Switch to the second menu page with »

»Advanced Picture Settings« with »G«.

V« and conﬁrm

Back

Exit

Select

4 Select »DNR«, »Mpeg NR«, »Vibrant colour«, »Perfect Clear«,

»Dynamic Contrast«, »Dynamic Backlight« or »Backlight« with

V« or »Λ«.

PICTURE

Select the value with » « or » « and conﬁrm with »G«.

–

DNR

Auto

Mpeg NR

Off

Notes:

Vibrant Colour

Perfect Clear

Dynamic Contrast

Dynamic Backlight

Backlight

You can only select the »Mpeg NR« function on digital and AV

presets.

»Mpeg NR« reduces any interference from artefacts (pixel

blocks) from digital stations with MPEG compression (such as

from DVB-T receivers or DVD players).

GGGGGGGGGGGGGGGGG

100

Back

Exit

Select

»Dynamic Contrast« the contrast adjusts according to the picture

content to ensure optimum contrast.

»Dynamic Backlight« backlighting adjusts according to the pic-

ture content to ensure optimum contrast.

You can only change the backlighting if the »Dynamic Backlight«

function is switched oﬀ.

5 Press »i« to end the setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS_{----------------------------------------------------------------------------------------------------}

Audio settings

1 Open the menu with »i«.

SOUND

– The »PICTURE« menu is displayed.

GGGG

Volume

2 Select the »SOUND« menu with » « or » « and conﬁrm with

GGGGGGGGGGGGGGGGGG

–

Balance

AVL

Off

»G«.

Sound Type

Sound Mode

Equalizer

Headphone

Stereo

Normal

Note:

Additional operations are explained in the following sections.

GGG

Volume

Back

Exit

Select

1 Select »Volume« with »

« or » «.

V« or »Λ« and adjust the setting with

–

Balance

1 Select »Balance« with »

« or » «.

V« or »Λ« and adjust the setting with

–

Automatic volume

SOUND

The television channels broadcast at diﬀerent volumes. The automatic

volume limiting (AVL) function means the volume is kept the same

when you switch between channels.

GGGG

Volume

GGGGGGGGGGGGGGGGGG

Balance

AVL

Off

Sound Type

Sound Mode

Equalizer

Headphone

Stereo

Normal

1 Select »AVL« with »

V« or »Λ« and then select »On« with » « or

–

«.

GGG

Note:

Back

Exit

If the »SRS« setting has been selected in the »Sound Mode« line,

the AVL line cannot be selected.

Select

Stereo / two channel, mono

If the device receives two channel programmes, e.g. a ﬁlm with the

original sound on sound channel B (display: »Dual II«) and the

dubbed version on sound channel A (display: »Dual I«), you can

select the sound channel you desire.

If the device receives stereo or Nicam programmes, it switches

automatically to stereo sound (display: »Stereo«).

You can switch the sound to »Mono« if the stereo reception

quality is poor.

SOUND

GGGG

Volume

GGGGGGGGGGGGGGGGGG

Balance

AVL

Off

Sound Type

Sound Mode

Equalizer

Headphone

Stereo

Normal

1 Select »Sound Type« with »

V« or »Λ« and adjust the setting with

« or » «.

–

GGG

Stereo width

Widens the audio output for stereo programmes and improves the

sound with mono reception.

Back

Exit

Select

1 Select »Sound Mode« with »

V« or »Λ«.

2 Press » « or » « to select the setting »Spatial«.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS_{----------------------------------------------------------------------------------------------------}

SRS TruSurround XT*

SOUND

SRS TruSurround XT is a patented audio technology, which is inte-

grated in the television set and only requires the built-in speakers to

produce a Surround Sound eﬀect.

GGGG

Volume

GGGGGGGGGGGGGGGGGG

Balance

AVL

Off

Sound Type

Sound Mode

Equalizer

Headphone

Stereo

Normal

1 Select the »Sound Mode« line with »V« or »Λ«.

GGG

2 Select the setting »SRS« with » « or » «.

–

Back

Exit

Equaliser

Select

The equaliser oﬀers you four preset sound settings (Music, Sports,

Movie and Speech) and one which you can create yourself (User).

SOUND

1 Select »Equalizer« with »V« or »Λ« and conﬁrm with »G«.

GGGG

Volume

– The »EQUALIZER« menu appears.

GGGGGGGGGGGGGGGGGG

Balance

AVL

Off

Note:

Sound Type

Sound Mode

Equalizer

Headphone

Stereo

Normal

If the »SRS« setting has been selected in the »Sound Mode« line,

the »Equalizer« line cannot be selected.

GGG

2 Select the audio setting »User« with » « or » « and conﬁrm with

–

»V«.

Back

Exit

Select

– The frequency band »120 Hz« is activated.

3 Set the desired value with » « or » « and select the next

frequency band with » « or » «.

–

4 Press »Z« to save the setting.

Audio description (audio subtitles)

Audio description is an additional audio channel for people who

are visually impaired. The activities, surroundings, scene changes or

the appearance, the gestures and facial expressions of the actors

are described.

This sound is transmitted at the same time as the normal sound with

digital television stations. This depends on the programme being

broadcast.

SOUND

1 Select »o« with »V« or »Λ«.

Audio Description

Volume

Off

GGG

2 Select »Audio Description« with »V« or »Λ« and press »G« to

conﬁrm.

3 Select »On« with » « or » «.

–

4 Select the »Volume« with »

V« or »Λ« and adjust with » « or

–

Back

Exit

Select

«.

* Under licence from SRS Labs, Inc.

TruSurround XT, SRS and the

symbol are trademarks of SRS Labs, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS_{----------------------------------------------------------------------------------------------------}

TruBass and Dialog Clarity

The »TruBass« setting gives you an increased bass eﬀect.

»Dialog Clarity« recognises dialogue sections in audio recordings

and improves dialogue reproduction.

The two functions can be found on the second page of the

»SOUND« menu.

Note:

SOUND

The »SRS« setting must be selected in the »Sound Mode« line.

Audio Description

TruBass

Off

1 Select »TruBass« or »Dialog Clarity« with »V« or »Λ«.

Dialog Clarity

2 Select the setting with » « or » «.

–

3 Press »Z« to end the setting.

Back

Exit

Concluding the settings

Select

1 Press »i« to ﬁnish the settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

TELEVISION OPERATION _{------------------------------------------}

Basic functions

Switching on and oﬀ

1 Press »8«, »1…0« or »V« or »Λ« to switch on the device from

standby mode.

2 Press the »8« button to switch the television to standby mode.

Selecting channels

1 Use »1…0« to select channels directly.

2 Press »

3 Open the channel list by pressing »G«, select the station with »

or » « and press »G« to switch oﬀ the channel list.

V« or »Λ« to move up and down channels.

V«

Selecting stations from lists

You can select stations from various lists, (e.g. All Channels, FAV1).

1 Press »P« to call up the overview of channel lists.

– The overview is displayed.

2 Press »

« or »

« to select the channel list and »G« to conﬁrm.

« to select the channel and »G« to conﬁrm.

3 Press »

« or »

Selecting AV channels

1 Call up the »INPUT SOURCE« menu with »AV«.

2 Select the desired AV channel position with »

press »G« to conﬁrm.

V« or »Λ« and

3 Switch back to the television channel with »1…0«.

Switching between digital and analogue channels

1 Open the »INPUT SOURCE« menu by pressing »AV«.

2 Press »V« or »Λ« to select »DTV« (digital presets) or »ATV«

(analogue presets) and press »G« to conﬁrm.

Adjusting the volume

1 Adjust the volume with » « or » «.

–

Muting

1 Use » « to switch the sound oﬀ (mute) and to switch it on again.

Displaying time

1 You can display the time by pressing the »¥« button.

Download from Www.Somanuals.com. All Manuals Search And Download.

TELEVISION OPERATION _{------------------------------------------}

Displaying information

1 Press »?« to display the information.

– The display disappears automatically after a short while.

Freeze-frame

If you wish to view a particular scene for longer, you can freeze the

frame of the current programme.

1 Press »3« (yellow).

2 To quit this function, press »3« again.

Picture settings

You can select diﬀerent picture settings.

1 Select the desired picture setting from »User«, »Sports«, »Movie«,

»Natural« or »Vivid« with » «.

– You can alter the »User« picture setting, see the ”Picture

settings” chapter on page 16.

Sound settings

You can select various audio settings when watching analogue

channels.

1 Select »User«, »Speech«, »Movie«, »Sports«, »Music« or by

pressing » « (blue).

– You can modify the »User« audio setting – see the “Equaliser”

chapter on page 18.

Audio language

You can select various languages when watching digital channels.

This depends on the programme being broadcast.

1 Press » « (blue) to open the selection menu.

2 Select your language using »V« or »Λ« and press »G« to

conﬁrm.

Subtitles

You can select various subtitles when watching digital channels.

This depends on the programme being broadcast.

1 Open the selection menu with »S«.

2 Select your language using »V« or »Λ« and press »G« to

conﬁrm.

Zoom function

With this function, you can enlarge the picture on the television or

computer.

1 Activate the zoom function by pressing and holding down

»SCAN«.

Download from Www.Somanuals.com. All Manuals Search And Download.

TELEVISION OPERATION _{------------------------------------------}

Zap function

This function allows you to save the television channel which you are

currently watching and switch to other channels (zapping).

1 Select the channel you want to save in the zap memory with

»1…0« or »

Λ« »V«, (e.g. channel 1, BBC 1) and save by pres-

sing »Z«.

2 Change channels with »1…0« or »Λ« »V«.

3 You can now use »Z« to switch between the saved channel (in the

example, BBC1) and the channel you were watching before.

4 Press »i« to quit the zap function.

– The display disappears.

Electronic TV guide

The electronic program guide oﬀers an overview of all programmes

that will be broadcast in the next week (for digital stations only).

1 Press »TV-G« to see programme information.

Notes:

Not all stations supply provide a detailed TV guide.

Many broadcasters supply the daily programme but no detailed

descriptions.

There are broadcasters which do not provide any information at

all.

2 Select the television station with »V« or »Λ«.

– The programmes being shown on the selected television

channel for today are displayed.

In addition, information about the programme currently being

transmitted is displayed with detailed information.

3 Press » « to switch to today’s programme.

Note:

You can open and switch oﬀ extensive programme information

with » «.

4 Press »V« to select information on the next programme and, »Λ«

to return to the information for the current programme.

5 Press »¥« (green) to select the next days, and » « (red) to

return to today.

6 Switch back to the station selection by pressing » «.

–

Note:

Press » « (blue) and »G« to transfer the selected programme into

the memory timer.

7 Press »i« to quit the electronic programme guide.

Download from Www.Somanuals.com. All Manuals Search And Download.

TELEVISION OPERATION _{------------------------------------------}

Changing the picture format

The television automatically switches to the 16:9 format if this

format is detected via the Euro-AV socket.

1 Select the picture format with » «. The selected picture

format, for example »16:9«, appears on the screen.

– You can choose between the following picture formats:

»AUTOMATIC« format

The picture format is automatically switched to »16:9« for 16:9

programmes.

The picture format is automatically switched to »4:3« for 4:3

programmes.

»16:9« and »14:9« formats

During programmes in 4:3 format, the picture is stretched horizon-

tally if »16:9« or »14:9« is selected.

The picture geometry is stretched horizontally.

With actual 16:9 signal sources (from a set-top box on the Euro-AV

socket) the picture ﬁlls the screen completely and with the correct

geometry.

»4:3« format

The picture is shown in 4:3 format.

»LetterBox« format

The letterbox setting is especially suitable for programmes in 16:9

format.

The black borders which are usually at the top and bottom of the

screen are eliminated, 4:3 pictures ﬁll the screen.

The transmitted pictures are enlarged, but are slightly cropped at the

top and bottom. The picture geometry remains unchanged.

»Subtitle« format

If you cannot read the subtitles which appear on the bottom of the

screen, then select »Subtitle«.

»Panorama« format

This setting is suited to ﬁlms with a large width/height ratio.

During programmes in 4:3 format the picture is stretched horizon-

tally if the »Panorama« function is selected. The picture geometry is

stretched horizontally.

Download from Www.Somanuals.com. All Manuals Search And Download.

TELETEXT MODE _{----------------------------------------------------------------------------}

TOP text or FLOF text mode

1 Press »TXT« to switch to teletext mode.

2 You can directly select teletext pages with »1...0«.

To return to page 100, press »i«.

Note:

At the bottom of the screen, you will see an information line con-

sisting of a red, green and, depending on the station, yellow and

blue text ﬁeld. Your remote control has buttons with the corre-

sponding colours.

3 Press » « (red) to scroll back a page.

Press »¥« (green) to scroll to the next page.

5 Press »3« (yellow) to select chapters.

6 Press » « (blue) to select topics.

7 Press »TXT« to switch oﬀ teletext mode.

Normal text mode

1 Press »TXT« to switch to teletext mode.

2 You can directly select teletext pages with »1...0«.

To return to page 100, press »i«.

3 Press »

4 Press »

« to scroll back a page.

« to scroll to the next page.

5 Press »TXT« to switch oﬀ teletext mode.

Additional functions

Skipping the waiting time

While a page is being searched for, you can switch to the television

channel.

1 Enter the teletext page number using »1…0« and then press

»PIP«.

– As soon as the page is found, the page number is displayed.

2 Press »PIP« to switch to the teletext page.

Increasing character size

If you have diﬃculty reading the text on the screen, you can double

the character size.

1 To enlarge the character size of a teletext page, press »SCAN«

repeatedly.

Download from Www.Somanuals.com. All Manuals Search And Download.

TELETEXT MODE _{----------------------------------------------------------------------------}

Page stop

A multiple page may contain several sub-pages, which are auto-

matically scrolled by the transmitting station.

1 Stop the sub-pages with »P«.

2 Press »P« to quit the function.

Calling up a sub-page directly

If the selected teletext page contains further pages, the number

of the current sub-page as well as the total number of pages is

displayed.

1 Call up the sub-pages with »S«.

2 Press »1…0« to enter the sub-menu.

3 Press »S« to quit the function.

Reveal answer

Certain teletext pages contain ”hidden answers” or information

which can be called up.

1 Display information with »?«.

2 Conceal information with »?«.

Split screen (Split Screen)

With this function you can see the television channel on the left and

the teletext page on the right.

1 To activate the split screen function, press »PAT«.

– The television channel and the teletext page appear next to

each other on the screen.

2 To deactivate the split screen function, press »PAT«.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONVENIENCE FUNCTIONS _{------------------------------}

Convenience functions

1 Open the menu with »i«.

OPTIONS

– The »PICTURE« menu is displayed.

Language Settings

Restore Factory Defaults

2 Select »OPTIONS« with » « or » « and press »G« to conﬁrm.

–

Country

Deutschland

Note:

Game Mode

Off

Additional operations are explained in the following sections.

Software Update

SPDIF Output

PCM

Changing the menu language

Back

Exit

Select

1 Select »Language Settings« with »

« oder »

Λ« and press »G«

to conﬁrm.

2 Select »Language Settings« with »

V« oder »

Λ.

3 Select the language with » « or » «.

–

4 Press »i« to ﬁnish the setting.

Language settings

(only for digital television channels)

You can alter the appearance of subtitles or disable them, select the

subtitle language, select a second subtitle language, and select the

audio language and a second audio language.

1 Select »Language Settings« with »V« or »Λ« and press »G« to

OPTIONS

conﬁrm.

Language Settings

Audio Languages

Subtitle Languages

Hard of Hearing

English

Off

2 Select »Audio Languages«, »Subtitle Languages«, »Hard of Hear-

ing«) with » « or » « and press »G« to conﬁrm.

3 Select »Primary« or »Secondary« with »

»G« to conﬁrm.

V« or »Λ« and press

4 Press » « or » « to make the setting.

Back

Exit

–

Select

5 Select »Close« with »V« or »Λ« and press »G« to conﬁrm.

6 Press »i« to end the setting.

Resetting the television to its original state

This function enables you to delete the station lists and all custom

settings.

OPTIONS

Language Settings

1 Select »Restore Factory Defaults« with »

»G« to conﬁrm.

V« oder »Λ« and press

Restore Factory Defaults

Country

Deutschland

Off

Game Mode

2 Select the »Yes « button with » « or » « and conﬁrm the reset

–

Software Update

SPDIF Output

function with »G«.

PCM

– The »Installation Guide« menu is displayed.

Back

Exit

Select

3 Continue the settings as described in the chapter on searching

for television stations on page 13.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONVENIENCE FUNCTIONS _{------------------------------}

Game mode

This function is only available for preset channels »HDMI1«,

»HDMI2«, »HDMI3«, »YPBPR« or »PC«.

Use this function to adjust the screen settings of the television set for

games. Connect the games console using the »HDMI1«, »HDMI2«,

»HDMI3«, »COMPONENT INPUT VIDEO IN Y Pb Pr« or

»PC-IN VGA« sockets.

OPTIONS

Language Settings

Restore Factory Defaults

Country

Deutschland

Game Mode

Off

You can no longer make settings in the »PICTURE« menu.

Software Update

SPDIF Output

1 Select »Game Mode« with »V« or »Λ«

PCM

2 Press » « or » « to switch the function on or oﬀ.

–

Back

Exit

Select

3 Press »i« to end the setting.

Selecting the audio signal for digital output

Here you select whether the audio signal is emitted from the »SPDIF

OUT« socket in PCM data format or in AC3 format.

OPTIONS

Language Settings

Restore Factory Defaults

Country

Deutschland

1 Select »SPDIF Output« by pressing »V« or »Λ«.

Game Mode

Off

2 Select the signal type (»PCM« or »Dolby* D«) by pressing »

–

Software Update

SPDIF Output

or » «.

PCM

Back

Exit

3 Quit the setting by pressing »i«.

Select

Parental control

1 Open the menu with »i«.

PARENTAL CONTROL

– The »PICTURE« menu is displayed.

Lock System

Off

2 Select the »PARENTAL CONTROL« menu with » « or » « and

–

Set PIN

Block Programme

Parental Guidance

Panel Lock

press »G« to conﬁrm.

3 Enter the PIN code »0000« with »1 ... 0«.

Note:

Off

Additional operations are explained in the following sections.

Back

Exit

Select

Lock the system

Using this function, you can lock the television menus so that they

can only be accessed by entering a PIN code.

PARENTAL CONTROL

Lock System

Off

1 Select »Lock System« with »V« or »Λ«.

Set PIN

Block Programme

Parental Guidance

Panel Lock

2 Activate the lock with » « or » «.

–

Off

3 Press »i« to end the setting.

Back

Exit

Select

* “Dolby”and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license from Dolby Laboratories.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONVENIENCE FUNCTIONS _{------------------------------}

Changing the PIN code

Instead of the default code »0000«, you can enter a personal code.

PARENTAL CONTROL

Lock System

Off

Please take note of your personal code.

Set PIN

Block Programme

Parental Guidance

Panel Lock

1 Select »Set PIN« with »V« or »Λ« and press »G« to conﬁrm.

Off

2 Enter your new personal PIN code with »1 ... 0« in four digits.

3 Enter your personal PIN code again with »1 ... 0« and press

»G« to conﬁrm.

Back

Exit

Select

4 Press »i« to end the setting.

Block a television channel

You can block individual television channels which are not suitable

for children using a personal PIN code.

1 Select »Block Programme« with »

conﬁrm.

V« or »Λ« and press »G« to

PARENTAL CONTROL

Lock System

Off

Set PIN

– The channel list is displayed.

Block Programme

Parental Guidance

Panel Lock

2 Select the television channel in the »Programme Table« with »

V«

Off

or » « and press »¥« (green) to conﬁrm.

– The »D« symbol is displayed in front of the channel in the Pro-

gramme Table.

Back

Exit

Select

3 Press »i« to end the setting.

Note:

Press »V« or »Λ« to release the channel and switch oﬀ the block

by pressing »¥« (green).

Authorise channels

There are movies which contain contents or scenes which are not

suitable for children.

PARENTAL CONTROL

Lock System

Off

Set PIN

Certain programmes contain information which identiﬁes these

contents or scenes and have been given an access level from 4 to

18. You can select one of the access levels and thus authorise the

playback.

Block Programme

Parental Guidance

Panel Lock

Off

1 Select »Parental Guidance« with »

V« or »Λ«.

Back

Exit

Select

2 Select the access level with » « or » «.

–

3 Press »i« to end the setting.

PARENTAL CONTROL

Blocking the control panel (parental control)

If the control panel block is activated, the buttons on the television do

not work.

Lock System

Off

Set PIN

Block Programme

Parental Guidance

Panel Lock

Off

1 Select »Panel Lock« with »

V« or »Λ«.

2 Activate (On) or deactivate (Oﬀ) the panel block with » « or

–

Back

Exit

«.

Select

3 Press »i« to end the setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONVENIENCE FUNCTIONS _{------------------------------}

Timer functions

1 Open the menu with »i«.

TIMER

– The »PICTURE« menu is displayed.

Clock

19 /Jun 2008 14:35

2 Select the »TIMER« menu with » « or » « and press »G« to

–

Off Time

Off

On Time

Off

conﬁrm.

Sleep Timer

Auto Sleep

Time Zone

Off

Notes:

Berlin GMT+1

The correct time is shown in »Clock«.

Additional operations are explained in the following sections.

Back

Exit

Select

Switch-oﬀ timer

In the »Oﬀ Time« menu, you can enter a switch-oﬀ time for the tele-

vision. The television switches oﬀ after the entered time has elapsed

in stand-by.

TIMER

1 Select »Oﬀ Time« with »

« or »

« and press »G« to conﬁrm.

Clock

19 /Jun 2008 14:35

Off Time

Off

2 Select »Repeat« with »

« or »

« and select the mode with »

–

On Time

Off

or » «.

Sleep Timer

Auto Sleep

Time Zone

Off

3 Select »Hour« with »

« or »

« and enter the time with »1…0«.

« and enter the time with

Berlin GMT+1

4 Select »Minute« with »

»1…0«.

« or »Λ

Back

Exit

Select

5 Select »Close« with »V« or »Λ« and press »G« to conﬁrm.

6 Press »i« to end the setting.

Switch-on timer

In the »On Time« menu, you can enter a switch-on time for the tele-

vision.

The television switches on with the preset volume and the desired

channel after the set time in stand-by mode has elapsed.

TIMER

1 Select »On Time« with »

2 Select »Activate« with »

choose when the television should switch on.

3 Select »Hour« with » « or » « and enter the time with »1…0«.

« or » « and enter the time with

« or »

« and press »G« to conﬁrm.

Clock

19 /Jun 2008 14:35

« or »

« and press » « or » « to

–

Off Time

Off

On Time

Off

Sleep Timer

Auto Sleep

Time Zone

Off

Berlin GMT+1

4 Select »Minute« with »

»1…0«.

Back

Exit

Select

5 Select »Volume« with »

V« or »Λ« and set the volume by pressing

« or » «.

–

6 Select »Mode« with »

« or »

« and press » « or » « to select

–

»DTV« or »ATV«. This entry is only possible if you have already

entered a switch-on time.

7 Select »Program« with »

V« or »Λ« and enter the television

channel by pressing » « or » «.

–

8 Select »Close« with »

V« or »Λ« and press »G« to conﬁrm.

9 Press »i« to end the setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONVENIENCE FUNCTIONS _{------------------------------}

Enter the switch-oﬀ time (Sleep Timer)

In the »Sleep Timer« menu you can enter a time for the television to

switch oﬀ. After this time has elapsed, the television switches to

standby mode.

TIMER

Clock

19 /Jun 2008 14:35

Off Time

Off

On Time

Off

1 Select »Sleep Timer« with »

V« or »Λ«.

Sleep Timer

Auto Sleep

Time Zone

Off

2 Select the switch-oﬀ time with » « or » «.

–

Berlin GMT+1

Note:

Back

Exit

Switch oﬀ the function by pressing » « or » « to set it to »Oﬀ«.

–

Select

3 Press »i« to end the setting.

Automatic switch-oﬀ (Auto Timer)

If this function is activated, the television switches oﬀ after 5 minutes

on stand-by if no video signal is transmitted.

TIMER

Clock

19 /Jun 2008 14:35

Off Time

Off

1 Select »Auto Sleep« with »

V« or »Λ«.

On Time

Off

Sleep Timer

Auto Sleep

Time Zone

2 Press » « or » « to switch the function »On«.

–

Note:

Off

Berlin GMT+1

Switch oﬀ the function by pressing » « or » « to set it to »Oﬀ«.

–

Back

Exit

Select

3 Press »i« to end the setting.

Setting the time zone

The television automatically detects the local diﬀerence to Green-

wich Mean Time (the selected channel provides a time signal). You

can set the local time diﬀerence yourself if the time is not detected or

is not the same as your local time.

TIMER

Clock

19 /Jun 2008 14:35

Off Time

Off

On Time

Off

Sleep Timer

Auto Sleep

Time Zone

1 Select »Time Zone« with »V« or »Λ«

Off

Berlin GMT+1

2 Set the time zone with » « or » « (in Germany: + 1.00 hour).

–

Back

Exit

3 Press »i« to end the setting.

Select

Download from Www.Somanuals.com. All Manuals Search And Download.

USB-MODE _{----------------------------------------------------------------------------------------------}

The ﬁle formats

Your television can be operated via the USB input with the following

ﬁle formats:

MP4 video data

The MP4 process was designed to compress video ﬁles.

An MP4 video is an encoder/decoder, based on the MPEG-4 com-

pression system, which is used to decrypt and display compressed

video data.

This enables the televsion to play back videos compressed in the

MPEG 4 SP format.

MPEG 4 SP ﬁles are “packaged” with the audio data – which have

been compressed using MP3, AAC or Dolby Digital^©– in this “.AVI”

or “.MP4” ﬁle.

MP3/WMA audio data

MP3 stands for MPEG-1 Audio Layer 3 and comes from the Motion

Picture Expert Group (MPEG) standard, which was developed for

compressing audio and video data.

WMA is a compression standard for audio data (Windows Media

Audio).

These formats enable audio ﬁles to be saved on a computer with a

sound quality similar to that of a CD.

MP3 ﬁles can be organised into folders and subfolders similar to

ﬁles on a computer.

JPEG picture data

JPEG stands for Joint Picture Experts Group. This process was de-

signed to compress picture ﬁles.

JPEG ﬁles can be saved onto a data medium along with other ﬁle

types.

The ﬁles can be compiled in folders. This structure is similar to that of

an MP3 CD.

Download from Www.Somanuals.com. All Manuals Search And Download.

USB-MODE _{----------------------------------------------------------------------------------------------}

Connecting external data media

Before connecting the data medium, switch the television to stand-by

with »8«. Connect the device and then switch the television on again.

Before connecting the data medium, the television must ﬁrst be

switched to standby, otherwise ﬁles can be damaged.

1 Connect the USB interface »USB« of the television and the

corresponding socket on the data device (external hard drive,

digital camera, card reader or MP3 player) using a USB cable;

plug the memory stick into the USB interface »USB« of the tele-

vision.

Note:

A bi-directional data transfer as deﬁned for ITE (Information

Technology Equipment) devices in EN 55022/EN 55024 is not

possible.

USB transfer is not in itself an operating mode. It is only an addi-

tional function.

Download from Www.Somanuals.com. All Manuals Search And Download.

USB-MODE _{----------------------------------------------------------------------------------------------}

The ﬁle browser

The ﬁle browser displays the data (AVI., JPEG, MP3, MP4 or WMA

data) that the external data medium oﬀers.

If a data medium contains diﬀerent ﬁle formats, you can deactivate

data you do not need for the playback using a ﬁlter function (All

Supported, Text, Movie, Music, Photo).

The main menu of the ﬁle browser

All Supported

16GB/20GB Free

PMP

C:\

Bilder

Musik 1

Musik 2

Filme

Back

1/1

1 Selected data format.

2 Name of the data medium.

3 Total folders on the data medium.

4 Total memory and available memory of external data medium.

5 Inset picture of a selected JPEG picture.

6 Status information for the selected ﬁle.

7 Menu navigation.

Download from Www.Somanuals.com. All Manuals Search And Download.

USB-MODE _{----------------------------------------------------------------------------------------------}

Settings in the USB setup menu

Opening the USB setup menu

1 Open the menu with »i«.

– The »PICTURE« menu is displayed.

2 Select the »USB SETUP« menu with » « or » «.

–

Note:

Additional operations are explained in the following sections.

Switching on automatic preview

If the automatic preview is switched on, you can see the selected

JPEG picture in the main menu of the ﬁle browser.

USB SETUP

Auto Preview

Off

Slide Show Interval

View Mode

1 Select »Auto Preview« with »

V« or »Λ«

Original

2 Press » « or » « to switch on the (on) function.

–

3 Press »i« to end the setting.

Selecting the display duration of the slideshow

1 Select »Slide Show Interval« with »V« or »Λ«.

Back

Exit

Select

2 Select the time (3, 5, 10 seconds) with » « or » «.

–

3 Press »i« to end the setting.

Selecting the display mode

1 Select »View Mode« with »

V« or »Λ«.

2 Press » « or » « to select the function.

–

3 Press »i« to end the setting.

Playback – Basic functions

1 Press »AV« to select data medium, press »

« or »Λ« to select

»USB« and press »G« to conﬁrm.

– The ﬁle browser (the “Contents”) of the data medium is dis-

played.

2 Select ﬁle format (All Supported, Text, Movie, Music, Photo) with

–

« or » «.

3 Switch to the ﬁle overview with »G«.

4 Select the ﬁle you want with »V« or »Λ« and press »G« to

conﬁrm.

– A list of sub-directories appears.

Note:

Switch back to the main folder with »Z«.

Download from Www.Somanuals.com. All Manuals Search And Download.

USB-MODE _{----------------------------------------------------------------------------------------------}

5 Select the track or picture with »V« or »Λ« and start play by

pressing » «.

– You can view information on the ﬁlm by pressing » « (red).

– For playing MP3 or WMA data, information on the album,

track and singer is displayed at the right of the menu.

– When playing picture data, information about the resolution

and the size is displayed at the right of the menu.

Note:

The ﬁle browser is switched oﬀ when playing picture data. Press

»⁷« to switch back to the ﬁle browser.

6 Press »!« to pause playback.

7 Press » « to resume normal playback.

8 Press »7« to end playback.

– The ﬁle browser appears.

Note:

To return to the main folder, press »

Λ« to select the folder icon

..« and then press »G«.

Additional playback functions

Depending on the ﬁle formats used, the following additional

functions are possible.

If the »^-« symbol appears on the television screen, then the selected

function is not possible with this ﬁle.

Play selected tracks

Only play the marked tracks.

1 Select the track with »

V« or »

Λ« and highlight using »G«.

2 Select the next track with »

3 Start playback with » «.

« or »Λ

« and highlight with »G«.

4 Press »7« to end playback.

Note:

To remove the highlighting, select the track with »V« or »Λ« and

switch oﬀ the marking with »G«.

Selecting a track or picture in steps (SKIP)

1 During playback, select the next track/picture you want with

»⁶«.

2 Select the previous track/picture with »5«.

– Playback begins with the track or picture you selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

USB-MODE _{----------------------------------------------------------------------------------------------}

Forward search (only MP4 video ﬁles)

You can select diﬀerent speeds (2-fold, 4-fold, 8-fold and 16-fold

forwards and backwards).

1 Select the playback speed during playback by pressing »m« or

»^,«.

2 Press » « to resume playback.

Enlarge/reduce picture

(only JPEG/MP4 video ﬁles)

This function allows you to enlarge or reduce various picture sections.

1 Press »G« during pause or playback.

Turn the picture display

(only JPEG ﬁles)

The pictures can be rotated by 90°.

1 During playback, press » « or » « to rotate the pictures by 90°.

–

Repeat functions

Options:

–»

«, the selected track is repeated once;

–»

«, all tracks are played repeatedly.

1 Before playback, select the repeat function with »PIP«.

2 Start playback with » «.

3 Deactivate the repeat function with »PIP«.

– The display changes to »

«.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING EXTERNAL DEVICES_{----------------------------------}

DVD player, DVD recorder, video recorder or

set-top box

Note:

Which television socket(s) you connect your external devices to

depends on the sockets the external device is equipped with and

the signals which are available.

Note that with many external devices the resolution of the video

signal must be adapted to the input sockets on the television

(check the external device’s instruction manual). You can ﬁnd out

which values you need to set by referring to the guidelines in the

section about connection options.

Note:

Do not connect any other equipment while the device is switched

on. Switch oﬀ the other equipment as well before connecting it.

Only plug the device into the mains socket after you have

connected the external devices.

High deﬁnition – HD ready

Your television can playback high-deﬁnition television signals

(HDTV).

You can connect the input sources (HDTV set-top box or High

Deﬁnition DVD player) to the »HDMI« socket (digital HDTV signal).

This ensures that you can view digital HDTV programmes, even if

they are copy-protected (HDCP High Bandwidth Digital Content Pro-

tection).

Connecting a DVD player, DVD recorder,

video recorder or set-top box

With a digital audio/video signal

Video signal: digital video; resolution: standard 576p; HDTV 720p,

1080i, 1080p.

Audio signal: digital audio (stereo, multi-channel compression,

uncompressed).

Channel position »HDMI1«, »HDMI2« or »HDMI3«.

1 Connect the »HDMI1«, »HDMI2« or »HDMI3« socket on the

television and the corresponding HDMI socket on the external

device using a standard HDMI cable (digital video and audio

signal).

Download from Www.Somanuals.com. All Manuals Search And Download.

USING EXTERNAL DEVICES_{----------------------------------}

With an analogue video signal (progressive)

Video signal: YUV; resolution: standard 576p; HDTV 720p, 1080i.

Audio signal: stereo, analogue.

Channel position »YPBPR«.

1 Connect the »COMPONENT INPUT Y Pb Pr« sockets on the

television and the corresponding sockets on the external device

using cinch cables (video signal).

2 Connect the »COMPONENT INPUT AUDIO IN L R« sockets

on the television to the corresponding sockets on the external

device using cinch cables (audio signal).

Using the Euro/AV socket

Video signal: FBAS/RGB.

Audio signal: stereo, analogue.

Channel position »SCART«.

1 Connect the »SCART« socket on the television and the corre-

sponding socket on the external device using a EURO-AV cable

(video and audio signal).

With S-Video signal

Video signal: Y/C.

Audio signal: stereo, analogue.

Channel position »S-Video«.

1 Connect the »S-VHS« socket on the television and the corre-

sponding socket on the external device using an S-Video cable

(video signal).

2 Connect the »L R« sockets on the television to the corresponding

sockets on the external device using cinch cables (audio signal).

With an analog TV signal

Video signal: FBAS.

Audio signal: stereo, analogue.

Channel position »AV«.

1 Connect the »Video« cinch socket on the television and the

corresponding socket on the external device using cinch cables

(video signal).

2 Connect the »L R« sockets on the television to the corresponding

sockets on the external device using cinch cables (audio signal).

Download from Www.Somanuals.com. All Manuals Search And Download.

USING EXTERNAL DEVICES_{----------------------------------}

Using a video recorder, DVD player or

set-top box

1 Switch on the video recorder, DVD player or set-top box and se-

lect the function you wish to use.

2 Press »AV«, select the input signal channel with »

(»SCART«, »AV«, »S-Video«, »HDMI1«, »HDMI2«,

»HDMI3« or »YPBPR«) and press »G« to conﬁrm.

Λ« or

V«

Headphones

Connecting the headphones

1 Plug the headphone jack (3.5 mm ø jack plug) into the head-

phone socket on the right side of the television.

Selecting audio settings for the headphones

1 Open the menu with »i«.

– The »PICTURE« menu is displayed.

2 Select the »SOUND« menu with » « or » « and conﬁrm with

–

»G«.

3 Select the »Headphone« with »

« or »Λ«.

SOUND

4 Adjust the volume with » « or » «.

–

GGGG

Volume

5 Press »i« to end the setting.

GGGGGGGGGGGGGGGGGG

Balance

AVL

Off

Sound Type

Sound Mode

Equalizer

Headphone

Stereo

Normal

GGG

Back

Exit

Select

Download from Www.Somanuals.com. All Manuals Search And Download.

USING EXTERNAL DEVICES_{----------------------------------}

Decoder or satellite receiver

In order for the television to receive encoded programs from a

privately operated station, a decoder is needed.

Connecting a decoder or satellite receiver

Decoder

1 Connect the »SCART« socket on the television set and the ap-

propriate socket on the decoder using a EURO-AV cable.

Using a decoder or satellite receiver

1 Switch on the television and the decoder or the satellite receiver.

2 Press »AV«, select the channel »SCART« with »

press »G« to conﬁrm.

V« or »Λ« and

Activating the preset for a decoder

If this function is activated, the decoder (connected to the »SCART«

socket) provides a decoded audio/video signal.

1 Open the menu with »i«.

OPTIONS

– The »PICTURE« menu is displayed.

Language Settings

Restore Factory Defaults

2 Select »OPTIONS« with » « or » « and press »G« to conﬁrm.

–

Country

Deutschland

Game Mode

Decoder Settings

Off

3 Select the »Decoder Settings« with »

V« or »Λ«.

4 Press » « or » « to switch the function (»On«).

–

SPDIF Output

Select

PCM

5 Press »i« to end the setting.

Back

Exit

Download from Www.Somanuals.com. All Manuals Search And Download.

USING EXTERNAL DEVICES_{----------------------------------}

Camcorder

Connecting the camcorder

1 Connect the yellow socket »Video« on the television and the

corresponding socket on the camcorder (VHS, Video 8) with a

cinch cable (picture signal);

connect the »S-VHS« socket (picture signal) on the television and

the corresponding socket on the camcorder (S-VHS, Hi 8) with a

S-Video cable.

2 Connect the white and red sockets »L R« on the television and the

corresponding sockets on the camcorder with a cinch cable

(audio signal).

Note:

There must not be video signals at »Video« and »S-VHS«

sockets at the same time. This could lead to picture disturbances.

Operating with a camcorder

1 Switch on the camcorder, insert a cassette and start playback.

2 Press »AV«, select the »AV« or »S-Video« channel with »

« and press »G« to conﬁrm.

V« or

Hi-ﬁ system/AV receiver

Connecting the hi-ﬁ system/AV receiver

1 Connect the socket »SPDIF OUT« on the television to the corre-

sponding socket on the AV receiver using a cinch cable (digital

audio signal).

Download from Www.Somanuals.com. All Manuals Search And Download.

PC MONITOR MODE _{----------------------------------------------------------}

Connecting a PC

1 Connect the socket »PC-IN VGA« on the television to the corre-

sponding socket on the PC using a VGA cable.

2 Connect the socket »PC AUDIO IN« on the television to the

corresponding socket on the PC using a cinch cable (audio

signal).

Note:

Adjust your PC to the monitor (for example, picture resolution

1280 x 768, picture frequency 60 Hz).

Selecting the channel position for the PC

1 Press »AV«, select the »PC« channel with »

V« or »Λ« and press

»G« to conﬁrm.

Settings for the PC

1 Open the menu with »i«.

– The »PICTURE« menu is displayed.

2 Select the »PC SETUP« menu with » « or » « and conﬁrm with

–

»G«.

3 Select the function or setting you want with »

« or »Λ« and press

PC SETUP

« or » « to execute it.

–

Auto Adjust

Horizontal Position

Vertical Position

Size

GGGGGGGG

GGGGGGGGGG

GGGGGGGGG

– Options:

»Auto Adjust«

For automatic PC conﬁguration;

»Horizontal Position« Adjust the picture position horizon-

tally;

Phase

»Vertical Position«

»Size«

»Phase«

Adjust the picture position vertically;

Set the cycle frequency;

Remove horizontal ﬂicker, blurring

and horizontal lines.

Back

Exit

Select

4 Press »i« to ﬁnish the settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION WITH COMMON INTERFACE

Inserting the CA module

Note:

Switch oﬀ the appliance before inserting the CA module in the

»CI« slot.

1 Insert the smart card into the CA module.

2 Insert the CA module with the smart card into the »CI« slot on the

television.

Note:

To see which CA module is in the Common Interface slot, go to

the »CA - Module« submenu.

Access control for CA module and smart card

1 Open the menu with »i«.

CHANNEL SETUP

– The »PICTURE« menu is displayed.

Auto Tuning

Digital Manual Tuning

Analogue Manual Tuning

Programme Table

Signal Information

CA - Module

2 Select the »CHANNEL SETUP« menu with » « or » « and con-

–

ﬁrm with »G«.

3 Select »CA–Module« with »V« or »Λ« and press »G« to

IRDETO ACCESS

conﬁrm.

Active Antenna Power

Back

Exit

Notes:

Select

This menu give operating instructions and – after you enter your

PIN code – access to channels of the PAY-TV provider.

The remaining settings are described in the manuals for your CA

module and smart card.

4 Press »i« to ﬁnish the settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL SETTINGS_{------------------------------------------------------------------}

Tuning digital television stations

This search deletes all television stations included in the channel list!

Tuning all digital television stations using the

1 Open the menu with »i«.

CHANNEL SETUP

– The »PICTURE« menu appears.

Auto Tuning

Digital Manual Tuning

Analogue Manual Tuning

Programme Table

Signal Information

CA - Module

2 Select the »CHANNEL SETUP« menu with » « or » «.

–

3 Select »Auto Tuning« with »

4 Select »Country Selection« by pressing »

« or » « to make the setting.

« or »

« and conﬁrm with »G«.

Not Inserted

« or » « and press

Active Antenna Power

–

Back

Exit

Select

5 Select the »Scan Type« with »

V«.

Press » « or » « to select the »DTV« display and start the search

–

with »G«.

– The »Searching...« menu appears, and the search for digital

TV stations begins. This may take several minutes depending

on the number of television stations received.

Searching...

GGGGGGGGGGGGGGGG

57 %

ZDF

UHF

CH49

DTV

– The search is ended when the »Programme Table« appears.

DTV

ZDFinfokanal

SAT.1

Note:

N24

ProSieben

kabel eins

You can stop the search by pressing »i«.

6 Press »i« to end the setting.

Skip

Exit

Tuning the digital television stations by entering

the channel numbers

1 Open the menu with »i«.

– The »PICTURE« menu appears.

2 Select the »CHANNEL SETUP« menu with » « or » «.

–

Digital Manual Tuning

3 Select »Digital Manual Tuning« with »

V« or »Λ

« and press »G«

UHF CH

to conﬁrm.

Frequency

578 MHz

– The »Digital Manual Tuning« menu appears.

Poor

Normal

Good

GGGGGGGGGGGGGGGG

4 Enter channel number directlywith »1 ... 0« and press »G« to

conﬁrm.

– The search is ﬁnished when the channels found appear in the

list.

–

Back

Exit

Select

5 Press »i« to end the setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL SETTINGS_{------------------------------------------------------------------}

Tuning analogue television stations

This setting is only necessary if you cannot receive any digital stations

and you have not carried out an analogue search during initial setup.

The television station can be set directly or using the search.

Switching the television to analogue channels

1 Open the »INPUT SOURCE« menu by pressing »AV«.

2 Select input source »ATV« with »V« or »Λ« and press »G« to

conﬁrm.

Note:

Additional operations are explained in the following sections.

Re-tuning all analogue television channels

These settings are only necessary if you can not receive any digital

stations or if you want to re-tune all analogue channels.

The analogue television stations are listed in the channel list after the

digital television stations.

Note:

Plug the rooftop antenna cable (for analogue television stations)

into the »ANT IN« socket on the television.

1 Open the menu with »i«.

CHANNEL SETUP

– The »PICTURE« menu appears.

Auto Tuning

2 Select the »CHANNEL SETUP« menu with » « or » «.

Digital Manual Tuning

Analogue Manual Tuning

Programme Table

Signal Information

CA - Module

–

3 Select »Auto Tuning« with »

4 Select »Country Selection« by pressing »

« or » « to make the setting.

« or »

« and conﬁrm with »G«.

Not Inserted

« or » « and press

Active Antenna Power

–

Back

Exit

5 Select the »Scan Type« with »

V«.

Select

Press » « or » « to select the »ATV« display and start the search

–

with »G«.

– The »Searching...« menu appears, and the search for analogue

TV stations begins. This may take several minutes depending

on the number of television stations received.

Searching...

GGGGGGGGGGGGGGGG

14%...

161.25 MHz

ATV

– The search is ended when the »Programme Table« appears.

ATV

1 ARD

2 ZDF

3 BR3

4 3 SAT

Note:

You can stop the search by pressing »i«.

6 Press »i« to end the setting.

Skip

Exit

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL SETTINGS_{------------------------------------------------------------------}

Tuning the analogue television channels by

entering the channel numbers

1 Open the menu with »i«.

Analogue Manual Tuning

– The »PICTURE« menu appears.

System

2 Select the »CHANNEL SETUP« menu with » « or » «.

–

Current Channel

S 21

Fine Tuning

Programme No

Skip

+ 00

3 Select »Analogue Manual Tuning« with »

»G« to conﬁrm.

« or »

« and press

Yes

Frequency

443.25 MHz

4 Select the »Programme No« by pressing »

V« or »

Λ« and press

« or » « to set the preset.

Save

–

Select

Back

Exit

5 Select »Current Channel« with »V« or »Λ«.

6 Press »G« to choose between »S« (special channel) or »C«

(channel).

Analogue Manual Tuning

7 Enter the channel number with » « or » « step by step or with

–

System

»1…0« directly.

Current Channel

S 21

Fine Tuning

+ 00

Note:

The current system is displayed in the »System« line. If the colour

and/or sound is not functioning correctly, select »System« with

Programme No

Skip

Yes

Frequency

443.25 MHz

»V

« or »

Λ«.

Save

Select the necessary settings with » « or » «.

–

Select

Back

Exit

8 Press » « (red) to ﬁnish the setting.

Note:

To set other television stations, repeat steps 4 to 8.

9 Press »i« to end the setting.

Fine tuning analogue television stations

The television automatically tunes itself to the best possible recep-

tion. You may need to ﬁne tune it manually in areas where the re-

ception is poor.

1 Select stations with »1 ... 0« directly or step by step with »

«.

V« or

»Λ

Analogue Manual Tuning

2 Open the menu with »i«.

System

Current Channel

S 21

– The »PICTURE« menu appears.

Fine Tuning

Programme No

Skip

+ 00

3 Select the »CHANNEL SETUP« menu with » « or » «.

–

Yes

4 Select »Analogue Manual Tuning« with »

»G« to conﬁrm.

V« or »Λ« and press

Frequency

443.25 MHz

Save

Select

Back

Exit

5 Select »Fine Tuning« with »V« or »Λ« and set with » « or » «.

–

6 Press » « (red) to ﬁnish the setting.

7 Press »i« to end the setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL SETTINGS_{------------------------------------------------------------------}

Changing stored channels for analogue stations

If channels were stored with the automatic channel search during

the tuning of the television channels, you can delete them. You can

also store stations in a diﬀerent preset, change or enter the name of

a stations as well as skip channels.

Select channel lists

1 Open the menu with »i«.

CHANNEL SETUP

– The »PICTURE« menu is displayed.

Auto Tuning

2 Select the »CHANNEL SETUP« menu with » « or » « and con-

–

Digital Manual Tuning

Analogue Manual Tuning

Programme Table

Signal Information

CA - Module

ﬁrm with »G«.

3 Select »Programme Table« with »V« or »Λ« and press »G« to

Not Inserted

conﬁrm.

Active Antenna Power

Note:

Back

Exit

Select

Additional operations are explained in the following sections.

Deleting channels

1 In the »Programme Table« menu, press »V« or »Λ« to select the

channel to be deleted and press »3« (yellow) to conﬁrm.

2 Press »¥« (green) to conﬁrm the deletion.

Note:

Press » « (red) to delete all the channels.

Sorting television channels

1 In the »Programme Table« menu, select the channel to be moved

with with »V«, »Λ«, » « or » «.

–

2 Highlight the channel with »¥« (green).

3 Select a new channel position by pressing »Λ«, »V«, » « or

–

« and then press »G« to conﬁrm.

– All of the channels that follow move up one position.

Note:

To sort the other television channels repeat steps 1 to 3.

Entering the channel names

(maximum of 5 characters)

1 In the »Programme Table« menu, select the desired channel with

«, »

2 Highlight the channel with » « (red).

3 Select letters or numbers with » « or »

position with » « or » « and repeat.

V«, » « or » «.

–

V«, move to the next

–

4 Store the channel name with »G«.

Note:

To enter additional channel names, repeat steps 1 to 4.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL SETTINGS_{------------------------------------------------------------------}

Skipping television channels

You can highlight television stations to be skipped when you select

with »Λ« or »V«. It is still possible to select using the number buttons.

1 In the »Programme Table« menu, select the desired channel with

«, » «, » « or » «.

»Λ

–

2 Press » « to switch to the »-« symbol and press »G« to highlight

the television channel.

– The channel is marked with »^-«.

Note:

Channels can be enabled again. Press »V« or »Λ« to select the

channel, press » « to switch to the symbol »-« and press »G«

to enable the channel again.

Creating a list of favourites

You can select your favourite channels and save them in up to four

lists (FAV1 to FAV4).

1 In the »Programme Table« menu, select the television

channel with »V« or »Λ«.

2 “Push” the television channel with » « or » « into the favourites

–

list 1 to 4 and save it with »G«.

– The position in the favourites list is marked with »ꢀ«.

– You can enter the same channel in more than one favourites

list.

Note:

You can delete channels from the favourites list. Press »

V« oder

« and » « or » « to select the channel and »G« to delete it.

–

Concluding the settings

1 Press »i« to ﬁnish the settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION _{------------------------------------------------------------------------------}

Displaying signal information

(only for digital television channels)

1 Open the menu with »i«.

CHANNEL SETUP

– The »PICTURE« menu appears.

Auto Tuning

2 Select the menu »CHANNEL SETUP« with » « or » «.

Digital Manual Tuning

Analogue Manual Tuning

Programme Table

Signal Information

CA - Module

–

3 Select »Signal Information« with »V« or »Λ« and press »G« to

conﬁrm.

Not Inserted

– You will see information on the channel, modulation, quality

and signal strength.

Active Antenna Power

Back

Exit

Select

Notes:

The lower section of the menu shows the signal properties. The

further the bar for »Quality« and »Signal Strength« extends to

the right, the better the reception signal.

The signal level not only depends on your receiver system, but

also on the channel which is currently active. Remember this when

aligning your antenna using the signal level display.

4 Press »i« to end the display.

Updating software

(only for digital television channels)

1 Open the menu with »i«.

OPTIONS

– The »PICTURE« menu appears.

Language Settings

2 Select the »OPTIONS« menu with » « or » «.

–

Restore Factory Defaults

Country

Deutschland

Off

3 Select the »Software Update« menu by pressing »

V« or »Λ«.

Game Mode

4 Press »G« to start the software update.

Software Update

SPDIF Output

– The software is updated automatically, if possible.

PCM

Back

Exit

5 Press »i« to end the setting.

Select

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION _{------------------------------------------------------------------------------}

Dismantling the stand of the unit

If you want to attach your television to the wall with a wall bracket,

you need to dismantle the stand.

1 Place the television carefully front down on a table on top of a

suitable base, such as foam.

2 Unscrew the four screws (A).

3 Remove the stand (B).

4 Attach the cover (C) provided and fasten with two screws.

Caution:

Follow the assembly instructions for the wall bracket carefully or

have a specialist assemble it for you.

When purchasing the wall bracket, make sure that all the fasten-

ing points (D) on the television are also on the wall bracket and

that they are all used when mounting it.

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION _{------------------------------------------------------------------------------}

Technical data

Operating voltage:

230V, 50 Hz

Power consumption:

in operation 170 W (Vision 37)

in operation 210 W (Vision 42)

in standby < 1.2 W

Sound output:

2 x 20 watts music (2 x 10 sine wave)

Reception ranges:

Analogue: C01 ... C80,

special channels

S01 ... S41

Digital: VHF/UHF

Bandwidth 7 MHz and 8 MHz

COFDM modes: 2k and 8k

Constellation: 16QAM,

64QAM, QPSK

Preset channels:

Screen size:

400 (digital), 99 (analogue) and

8 AV, 1 USB

94 cm/37“ (Vision 37)

107 cm/42“ (Vision 42)

Max. resolution:

Weight:

WUXGA 1920 x 1080

approx 18.5 kg (Vision 37)

approx 23.2 kg (Vision 42)

Service information for dealers

The television set may only be operated with the mains adapter sup-

plied.

The product complies with the following EU directives:

2006/95/EG directive for electrical equipment to be used within

deﬁned voltage ranges. 2004/108/EG directive on electromag-

netic compatibility.

The device complies with the following standards: EN 60065,

EN 55013, EN 55020, EN 55022, EN 55024.

Environmental note

This product has been made from high-quality parts and materials

which can be re-used and recycled.

Therefore, do not throw the product away with normal household

waste at the end of its life. Take it to a collection point for recycling

electrical and electronic devices. This is indicated by this symbol on

the product, in the operating manual and on the packaging.

Please ﬁnd out about collection points operated by your local

authority.

Help protect the environment by recycling used products.

Technical changes and errors reserved.

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION _{------------------------------------------------------------------------------}

Troubleshooting

If the remedies given below do not work, please consult an autho-

rised GRUNDIG dealer. Please bear in mind that malfunctions can

also be caused by external devices such as video recorders or satel-

lite receivers.

Fault

Possible cause

Remedy

Screen lit (snow), but no station Antenna cable

Is the antenna cable connected?

Start the station search

No television station pro-

grammed

Poor picture contrast

Picture settings incorrectly set

Adjust the brightness, contrast

or colour setting

Problem at station

Test with another channel

Interference to picture and/or

sound

Interference from other devices Change the position of the

device

Ghosts, reﬂection

Channel setting

Automatic or manual channel

setting/ﬁne tuning

Antenna

Have antenna cable or system

checked

No colour

Colour intensity at minimum

Turn up the colour

TV standard setting (if setting

option is available)

Select the correct colour stan-

dard

Problem at station

Volume set to minimum

Problem at station

Test with another channel

Turn up or switch on the volume

Test with another channel

Picture but no sound

Teletext missing or faulty

Television station (has no tele-

text) or antenna system

Test another channel for ﬁne

tuning and ghosts

Station signal too weak

No optical connection

Check the antenna system

Remote control does not work

Picture is dark in PC mode

Point the remote control at the

television set

Remote control batteries

Check the batteries, change if

necessary

Operating condition undeﬁned Switch oﬀ the television with the

main power button for approxi-

mately 2 minutes

Incorrect setting for picure reso- Change the setting on the PC

lution and picture frequency on (for example, picture resolution

the PC

1280 x 768, picture frequency

60Hz)

NOTE:

This is a Class A product. During operation the device can cause

radio interference. In this case the user may have to remedy this.

Please contact your specialist dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION _{------------------------------------------------------------------------------}

Additional Information for units sold in the UK.

Units sold in the UK are suitable for operation from a 240V ac, 50Hz

mains supply.

The range of multi-system receivers is built to work in most European

countries. However, the mains plug and socket system for the UK diﬀers

from many European countries.

This appliance has been supplied with a ﬁtted, non-removable, approved

converter plug for use in the UK. This converter plug is ﬁtted with a 5A

rated fuse.

In case this appliance is supplied with a moulded 2-pin Euro plug only,

which is unsuitable for UK operation, this must be cut oﬀ and immediately

disposed of. An approved 13A, 3-pin UK plug should then be ﬁtted by a

qualiﬁed electrician.

Note:

The severed Euro plug must be destroyed to avoid a possible

shock hazard should it be inserted into a socket elsewhere.

If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug

is used, it must be ﬁtted with a 5A ASTA or BSI approved BS1362 fuse. If

any other type of plug is used it must be protected by a 5A fuse either in

the plug, or at the distribution board. If this type of plug becomes defec-

tive, ensure that the fuse is removed before disposal, to eliminate poten-

tial shock hazard.

If it is necessary to change the fuse in the non-rewireable plug, the cor-

rect type and rating (5A ASTA or BSI approved BS1362) must be used

and the fuse cover must be reﬁtted. If the fuse cover is lost or damaged,

the lead and plug must not be used until a replacement is obtained. Re-

placement fuse covers should be obtained from your dealer.

Important:

The wires in the mains lead are colour coded in accordance with the fol-

lowing code:

BLUE – NEUTRAL

BROWN – LIVE

As the colours of the wires in the mains lead of your appliance may not

correspond with the coloured marking identifying terminals in your plug,

proceed as follows:

Connect the BLUE coloured wire to plug terminal marked with the letter

“N” or coloured black.

Connect the BROWN coloured wire to the plug terminal marked with the

letter “L” or coloured red.

In no circumstance must any of the wires be connected to the terminal

marked with the letter “E”, earth symbol “V”, coloured green, or green &

yellow.

Download from Www.Somanuals.com. All Manuals Search And Download.

Grundig Multimedia B.V.

Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www.grundig.com

09/14

Download from Www.Somanuals.com. All Manuals Search And Download.

Grizzly Power Roller G7149 User Manual
Grizzly Saw G0503 User Manual
Haier Refrigerator HC17SF15RW User Manual
HannsG Computer Monitor HQ171DP User Manual
Harbor Freight Tools Grinder 33171 User Manual
Honeywell Dehumidifier DH90 User Manual
Honeywell Scanner VoyagerGS 9590 Series User Manual
Hotpoint Microwave Oven RVM1625 User Manual
HP Hewlett Packard Computer Monitor 15 inchhp55 User Manual
HTC Cell Phone Thunderbolt User Manual