COLOR
TELEVISION
XENTIA 55
MFS 55-4601/8 TOP
DEUTSCH
ENGLISH
ITALIANO
PORTUGUÊS
POLSKI
ČESKY
Download from Www.Somanuals.com. All Manuals Search And Download.
___________________________
SET-UP AND SAFETY
Please note the following information when setting up your television set.
10
cm
10
cm
20
cm
This television set is designed to receive and display video and audio
signals.
Any other use is expressly prohibited.
The ideal viewing distance is 5 times the screen diagonal.
External light falling on the screen impairs picture quality.
Ensure sufficient clearance between the TV and the wall cabinet.
The television set is designed for use in dry rooms. If you do use it in the
open, please ensure that it is protected from moisture, such as rain or
splashing water. Do not expose the television set to any moisture.
Do not place any vessels such as vases on the television, as they may
spill liquid, thus presenting a safety risk.
Place the television set on a solid, level surface. Do not place any
objects such as newspapers on the television set or cloth or similar items
beneath it.
g
am Golf
Do not place the television set close to heating units or in direct sunlight,
as this will impair cooling.
Heat build-up can be dangerous and shortens the operating life of the
television set. For reasons of safety, have a specialist remove any dirt
deposits in the set from time to time.
Keep the television set away from magnetic fields (loudspeaker boxes,
for example).
VICE !
! SER
Do not open the television set under any circumstances. Warranty
claims are excluded for damage resulting from improper handling.
Ensure that the mains cable is not damaged.
Thunderstorms are a danger to all electrical devices. Even if the tele-
vision set is switched off, it can be damaged by a lightning strike to the
mains or the antenna cable. Always disconnect the mains and antenna
plugs during a storm.
Clean the screen with a soft, damp cloth. Only use plain water.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
__________
CONNECTION/PREPARATION
Connecting the antenna and the mains cable
TV
R
AV
AV
2
1
2
1
1
2
Plug the antenna cable of the rooftop antenna into the »Ä« antenna
socket on the television.
Plug the mains cable into the wall socket.
Inserting batteries in the remote control
1
Open the battery compartment by removing the lid.
2
Insert the batteries (Mignon type, for example UM-3 or
AA, 2x1,5V).
Observe the polarity (marked on the base of the battery
compartment).
3
Close the battery compartment.
Note:
If the television no longer reacts properly to remote
control commands, the batteries may be flat. Be sure to
remove used batteries.
The manufacturer accepts no liability for damage re-
sulting from used batteries.
Environmental note
Batteries, including those which contain no heavy metal,
may not be disposed of with household waste. Please
dispose of used batteries in an environmentally sound
manner. Find out about the legal regulations which apply
in your area.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
____________________________________________
OVERVIEW
The remote control
Ǽ
Switches off the television set (stand-by).
PIP
E
-/--
Key has no function.
PIP
Switches between picture formats.
Switches between single and double-digit preset
channels;
switches to double character size in teletext mode.
z
1...0
Switches the television on from standby mode;
selects channels directly.
d
Sound on/off (mute).
TXT
AV
POS
d
SCAN
PAP
SIZE
i
Opens and closes the info menu;
closes all menus.
VCR
DVD
Z
Zap function.
SAT
P+, P-
Switches the television on from standby;
selects stations step by step;
moves the cursor in the menus up and down.
Tele Pilot 160 C
Ǹ Ƿ
Adjusts the volume;
moves the cursor left/right.
OK
Calls up the preset channels;
activates various functions.
TXT
AV
Switches between teletext and TV modes.
Selects the AV channels and the most recently viewed
television channel.
SCAN
PAP
Reveal answer in teletext mode.
Page stop in teletext mode.
SIZE
POS
Selects the sub-pages in teletext mode.
Updates a page in teletext mode.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
____________________________________________
OVERVIEW
z
Selects various picture settings;
scrolls back a page in teletext mode.
Ȅ
Calls up the TV Guide (information about the current
and next broadcast) and time.
PIP
Moves to the next page in teletext mode.
Ƿ
Selects the desired chapter in teletext mode.
F
Selects various audio settings;
selects the desired topic in teletext mode
z
VCR, SAT Switches to operating a GRUNDIG video
DVD
recorder, a GRUNDIG satellite receiver or
a GRUNDIG DVD player.
TXT
AV
POS
d
Keep the relevant buttons (»VCR«, »SAT«, »DVD«)
pressed down. Then press the button you require.
SCAN
PAP
SIZE
Note:
VCR
DVD
SAT
The functions available to you depend on the model of
the device you are using.
Just try it out.
Tele Pilot 160 C
The front of the television set
Ȃ
Switches the television into and out of
standby mode
+ PR -
Channel selection
Switches the television on from stand-
by
+ VOL -
R AUDIO L
VIDEO
Adjusts the volume
PR
Audio signal input for camcorder
Video signal input for camcorder
VO
L
S-VHS
Video signal input for S-video
camcorders
R
AUDIO
VIDEO
L
y
Headphone jack (3.5 mm ø jack
plug)
S-VHS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________________________
SETTINGS
Setting television channels automatically
The television set is equipped with an automatic channel search
system.
You start the search and can then sort the television channels into
your order of preference.
100 preset positions are provided, to which you can assign televisi-
on channels from the antenna or from the cable connection.
You can also delete television channels from the channel list which
were found more than once or which have poor reception.
1
Switch on the television with »
press »P+« on the remote control.
– The »Language« menu appears when the television is first
switched on.
Ȃ« on the television set, then
Language
English
Deutsch
Francais
Italiano
Español
Portuguesa
Eλληvικα
Türkçe
Svenska
Dansk
Norsk
Suomi
Slovensko
Polski
Magyar
Pycckꢄꢄ
ꢇ¹1ꢈꢈꢈ
Romaneste
Hirvatski
âe‰tina
Slovenãina
Gjuha Shqipe
ꢀꢁꢂꢃapckꢄ
Makeꢅꢆhckꢅꢄ
Srpski
Hint:
If the »Language« menu does not appear on the screen,
then set it in accordance with the chapter on resetting all tele-
vision channels on page 24.
Dutch
Select
OK
İ
2
Select language with »P+«, »P-«, » « or » « and press
»OK« to confirm.
– The »Country Selection« menu appears.
Ǹ
Ƿ
Country Selection
Belgium
Czech Rep.
Danmark
Deutschland
Eλλaδa
Hungary
Ireland
Italia
Netherlands Sverige
Norge
Portugal
Schweiz
Suomi
3
4
Select the country using »P+«, »P-«, » « or » «.
Ǹ
Ƿ
Press »OK« to start the automatic search.
– The automatic search may last a few minutes, depending on
the number of television channels received.
Türkiye
U.K.
...........
España
France
Österreich
Polska
– After performing the search, the menu »Provider Selection« is
displayed, (only if a provider was found). Kabel 1 in Ger-
many, for example.) Press »P+« or »P-« to select the TV
Guide provider and confirm by pressing »OK«.
Start Autoprogramming
OK
İ
i
Exit
●
Changing stored channels
You can delete channels that have been stored more than once
during the automatic search. You can also store channels in a diffe-
rent preset position, change or enter the name of a channel as well
as skip channels.
Selecting the station list
MAIN MENU
1
Press »i« to open the »MAIN MENU«.
Sound
Picture
2
Select »Preset List« with »P+« or »P-« and confirm with »OK«
– The »Preset List« menu appears.
Preset List
Channel settings
Settings
Note:
Further operation is explained in the following sections.
Select
OK
İ
i
Exit
●
7
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________________________
SETTINGS
Deleting channels
1
In the »Preset List« menu, select the station to be deleted by
Preset List
0
1 ARD
2 RTL
3 SAT1
4 ZDF
pressing »P+«, »P-«, » « or » «.
5 PRO 7
6 BR3
7 TELE5
8 WDR
10 VOX
11 SRTL
12
Ǹ
Ƿ
Ƿ
2
Press » « (yellow) to delete the channel.
13
9 KABEL1 14
Note:
To delete other stations, repeat steps 1 and 2.
● Skip
● Move
Delete
Select
OK
İ
●
Sorting television channels
i
Exit
●
● Name
1
In the »Preset List« menu, select the channel to be moved with
»P+«, »P-«, » « or » «.
Ǹ
Ƿ
Preset List
0
5 PRO 7
6 BR3
7 TELE5
8 WDR
10 VOX
11 SRTL
12
2
3
Highlight the channel with »
Ȅ« (green).
1 ARD
2 RTL
3 SAT1
4 ZDF
Select a new channel position by pressing »P+«, »P-«, » « or
Ǹ
13
9 KABEL1 14
»
« and then press »Ȅ« to confirm.
Ƿ
– All of the channels that follow move up one position.
● Skip
● Move
Delete
● Name
Select
OK
İ
Note:
●
i
Exit
●
To sort the other television channels repeat steps 1 to 3.
Entering the channel names
(maximum of 5 characters)
1
In the »Preset List« menu, select the desired channel with »P+«,
»P-«, » « or » «.
Preset List
0
1 ARD
2 RTL
3 SAT1
4 ZDF
Ǹ
Ƿ
5 PRO 7
6 BR3
7 TELE5
8 WDR
10 VOX
11 SRTL
12
F
2
3
Highlight the channel with » « (blue).
13
9 KABEL1 14
Select letters or numbers with »P+« or »P-«, move to the next
position with » « or » « and repeat.
Ǹ
Ƿ
● Skip
● Move
Delete
Select
OK
İ
F
4
Store the channel name with » « (blue).
●
i
Exit
●
● Name
Note:
To enter additional channel names, repeat steps 1 to 4.
Skipping television channels
You can mark television channels which should be skipped during
selection with »P+« or »P-«. A selection with the number keys is
also possible.
1
In the »Preset List« menu, select the desired channel with »P+«,
»P-«, » « or » «.
Preset List
0
1 ARD
2 RTL
3 SAT1
4 ZDF
Ǹ
Ƿ
5 PRO 7
6 BR3
7 TELE5
8 WDR
10 VOX
11 SRTL
12
z
2
Highlight the channel with »
« (red).
13
– The television channel is now displayed against a red back-
9 KABEL1 14
ground.
● Skip
● Move
Delete
● Name
– You can deselect the selected channel by pressing the red
button again.
Select
OK
İ
●
i
Exit
●
Concluding the settings
Press »i« to finish the settings.
1
8
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________________________
SETTINGS
Picture settings
1
2
3
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Picture
Brightness
Contrast
Colour
Sharpness
Color temperature Normal
DNR
Store
Select »Picture« with »P+« or »P-« and confirm with »OK«.
– The »Picture« menu appears.
Off
Select »Brightness«, »Contrast«, »Colour«, »Sharpness« or
»Color temperatur« with »P+« or »P-« and adjust them with
OK
İ
»
« or » «.
Ǹ
Ƿ
● Back
i
Exit
●
Note:
The »DNR« function improves the picture if the antenna signal
is poor.
Picture
Brightness
Contrast
Colour
Sharpness
Color temperature Normal
4
5
Select »Store« with »P+« or »P-« and confirm the setting with
»OK«.
DNR
Store
Off
– The »Stored« message appears.
Note:
OK
İ
The settings are saved as the »User« picture default setting.
● Back
i
Exit
●
Press »i« to finish the settings.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________________________
SETTINGS
Audio settings
1
Press »i« to open the »MENU«.
– The »MENU« appears.
Sound
Volume
Balance
Sound Type
Sound Mode
AVL
Equalizer
Store
Stereo
Normal
Off
2
Select »Sound« with »P+« or »P-« and confirm with »OK«.
– The »Sound« menu appears.
Note:
Further operation is explained in the following sections.
OK
İ
● Back
i
Exit
●
Volume
Sound
The standard volume is set here. This is the volume of the device
after switching on.
Volume
Balance
Sound Type
Sound Mode
AVL
Equalizer
Store
Stereo
Normal
Off
1
Select »Volume« with »P+« or »P-« and adjust the setting with
« or » «.
»
Ǹ
Ƿ
2
Select »Store« with »P+« or »P-« and confirm the setting with
»OK«.
OK
İ
● Back
i
Exit
●
Balance
Sound
Volume
Balance
Sound Type
Sound Mode
AVL
Equalizer
Store
1
Select »Balance« with »P+« or »P-« and adjust the setting with
« or » «.
»
Stereo
Normal
Off
Ǹ
Ƿ
2
Select »Store« with »P+« or »P-« and confirm the setting with
»OK«.
OK
İ
● Back
i
Exit
●
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual II «) and the
dubbed version on sound channel A (display: »Dual I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
Sound
Volume
Balance
Sound Type
Sound Mode
AVL
Equalizer
Store
Stereo
Normal
Off
1
Select »Sound Type« with »P+« or »P-« and adjust the setting
with » « or » «.
Ǹ
Ƿ
OK
İ
2
Select »Store« with »P+« or »P-« and confirm the setting with
»OK«.
● Back
i
Exit
●
10
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________________________
SETTINGS
Stereo width
Sound
Widens the audio output for stereo programmes and improves the
sound with mono reception.
Volume
Balance
Sound Type
Sound Mode
AVL
Equalizer
Store
Stereo
Normal
Off
1
2
3
Select »Sound Mode« with »P+« or »P-«.
Press » « or » « to select the setting.
Ǹ
Ƿ
Select »Store« with »P+« or »P-« and confirm the setting with
»OK«.
OK
İ
● Back
i
Exit
●
Automatic volume
Sound
The television channels broadcast at different volumes. The automa-
tic volume limiting (AVL) function means the volume is kept the same
when you switch between channels.
Volume
Balance
Sound Type
Sound Mode
AVL
Equalizer
Store
Stereo
Normal
Off
1
Select »AVL« with »P+« or »P-« and then select »On« with
« or » «.
»
Ǹ
Ƿ
OK
İ
2
Select »Store« with »P+« or »P-« and confirm the setting with
»OK«.
● Back
i
Exit
●
Equalizer
The equalizer offers you four preset sound settings (Music, Sports,
Cinema and Speech) and one which you can create yourself (User).
Sound
Volume
Balance
1
2
Select »Equalizer« by pressing »P+« or »P-« and press »OK«
to confirm.
– The »Equalizer« menu appears.
Sound Type
Sound Mode
AVL
Equalizer
Store
Stereo
Normal
Off
Select the »User« audio setting using »P+« or »P-« and press
»OK« to confirm.
– The »0.1 kHz« frequency band is activated.
Select
OK
İ
● Back
i
Exit
●
3
4
Set the value using »P+« or »P-« and select the next frequency
Equalizer
Music
Sports
Cinema
Speech
User
band by pressing » « or » «.
Ǹ
Ƿ
Press »OK« to save the setting.
0.1 0.5 1.5
5
10
Concluding the settings
Press »i« to finish the settings.
1
OK
İ
● Back
i
Exit
●
11
Download from Www.Somanuals.com. All Manuals Search And Download.
___________________
TELEVISION OPERATION
Basic functions
Switching on and off
1
Switch on the television by pressing the »
vision set.
Ȃ« button on the tele-
– The device switches to standby mode.
PIP
Switch the television on with »1…0« or »P+« or »P-«.
2
Press the »Ǽ« button to switch the television to standby mode.
Press »1…0« or »P+« or »P-« to switch on the device from
standby mode.
– After switching on, the station preset of the TV Guide provider
is automatically selected. After a short time, the information
about the current and upcoming broadcast is displayed.
z
3
Completely switch the television off by pressing »
television set.
– This saves electricity.
Ȃ« on the
TXT
AV
POS
d
SCAN
PAP
SIZE
Selecting channels
1
Use »1…0« to select channels directly.
Preselect two digit channel positions with »–/––«.
VCR
DVD
SAT
2
Press »P+« or »P-« to move up and down channels.
Selecting AV channel positions
Tele Pilot 160 C
1
Use »AV« to select AV channels directly.
Adjusting the volume
1
Adjust the volume with » « or » «.
Ǹ
Ƿ
Muting
1
Use » « to switch the sound off (mute) and to switch it on
again.
p
Call up TV Guide and time.
After switching the station presets, information about the current
broadcast is displayed (TV Guide).
1
Call up information about the current and next broadcast by
pressing » «.
- The information and the time are briefly displayed.
Ȅ
Note:
If the message »No info« is displayed, switch to the channel
preset of the TV Guide provider by pressing »1…0« or »P+«
or »P-«. After a few minutes the new data will have been loa-
ded.
Displaying information
1
Press »POS« to display the information.
– The display disappears automatically after a short while.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
___________________
TELEVISION OPERATION
Picture settings
1
Select the desired picture setting from »User«, »Natural«,
z
»Rich« or »Soft« with »
«.
– You can alter the »User« picture setting, see the ”Picture
settings” chapter on page 9.
Audio settings
F
1
Press » « to select the audio setting »User«, »Music«,
»Sports«, »Cinema« or »Speech«.
– You can alter the »User« audio setting – see the “equalizer”
chapter on page 11.
Zap function
This function allows you to save the television channel which you
are currently watching and switch to other channels (zapping).
1
Select the channel you want to save in the zap memory with
»1…0« or »P+« »P-«, (e.g. channel 1, BBC 1) and save by
pressing »Z«.
>
– The display »z – P1 BBC1« appears in the screen.
2
3
Change channels with »1…0« or »P+« »P-«.
You can now use »Z« to switch between the saved channel (in
the example, BBC1) and the channel you were watching before.
4
Press »i« to quit the zap function.
– The display disappears.
Changing the picture format
The television automatically switches to the 16:9 format, if this
format is recognised by the Euro-AV socket.
1
Select the picture format with »
format, for example »16:9«, appears on the screen.
– You can choose between the following picture formats:
«. The selected picture
E
»Auto« format
The picture format is automatically switched to »16:9« with 16:9
channels.
For programmes in 4:3 format, the picture automatically fills the
screen.
»4:3« format
For 4:3 programmes, select picture format »4:3«.
»16:9« format
For 16:9 programmes, select picture format »16:9«.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
_______________________________
TELETEXT MODE
TOP text or FLOF text mode
1
Press »TXT« to switch to teletext mode.
2
You can directly select teletext pages with »1...0«.
Return to the overview page 100 with »i«.
PIP
Note:
At the bottom of the screen, you will see an information line
consisting of a red, green and, depending on the station,
yellow and blue text field. Your remote control has buttons with
the corresponding colours.
z
z
3
4
5
6
7
Press »
« (red) to scroll back a page.
Press »
Ȅ
« (green) to scroll to the next page.
TXT
AV
POS
d
Ƿ
Press » « (yellow) to select chapters.
SCAN
PAP
SIZE
F
Press » « (blue) to select topics.
Press »TXT« to switch off teletext mode.
VCR
DVD
SAT
Normal text mode
1
Press »TXT« to switch to teletext mode.
Tele Pilot 160 C
2
You can directly select teletext pages with »1...0«.
Return to the overview page 100 with »i«.
3
4
5
Press »P-« to scroll back a page.
Press »P+« to scroll to the next page.
Press »TXT« to switch off teletext mode.
Additional functions
Waiting
While a page is being searched for, you can switch to the television
channel.
1
Enter the number of the teletext page with »1…0« and then
press »POS«.
– As soon as the page is found, the teletext page number
appears in the top left hand corner of the screen.
2
Switch to the teletext page by pressing »POS«.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
_______________________________
TELETEXT MODE
Increasing character size
If you have difficulty reading the text on the screen, you can double
the character size.
1
To enlarge the character size of a teletext page, press »–/––«
repeatedly.
PIP
Page stop
A multiple page may contain several sub-pages, which are automa-
tically scrolled by the transmitting station.
z
1
2
Stop the sub-pages with »PAP«.
Press »PAP« to quit the function.
TXT
AV
POS
d
Calling up a sub-page directly
SCAN
PAP
SIZE
If the selected teletext page contains additional pages, the number
of the current sub-page as well as the total number of pages is
displayed.
VCR
DVD
SAT
1
2
Call up the sub-pages with »SIZE«.
Enter the four-digit number for the sub-page with »1…0«.
– The selected sub-page is displayed after a short delay.
Tele Pilot 160 C
Reveal answer
Certain teletext pages contain ”hidden answers” or information
which can be called up.
1
2
Display information with »SCAN«.
Conceal information with »SCAN«.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
______________
CONVENIENCE FUNCTIONS
Convenience functions with the »Settings« menu
1
Press »i« to open the »MAIN MENU«.
2
Select »Settings« with »P+« or »P-« and confirm with »OK«.
Note:
Further operation is explained in the following sections.
Changing the menu language
1
Select »Language« with »P+« or »P-« and confirm with
Settings
»OK«.
Language
Timer
– The »Language« menu appears.
TV Guide
2
3
Select the language with »P+«, »P-« and press »OK« to con-
firm.
Select
OK
İ
● Back
i
Exit
●
Press »i« to finish the setting.
Entering the switch-on and alarm times
You can select various timer functions in the »Timer« menu.
»Clock« shows the current time.
»On time«, after this time has elapsed, the television
switches on from standby mode. In »Program« you can enter the TV
station with which the television switches on.
Settings
»Off time«, after this time has elapsed, the television
switches to standby mode.
Language
Timer
TV Guide
»Alarm time«, after this time has elapsed, the television switches on
from standby mode. An alarm tone also sounds.
Select
OK
İ
● Back
1
2
Select »Timer« with »P+« or »P-« and press »OK« to confirm.
i
Exit
●
Select »Clock«, »On Time«, »Off Time«, »Alarm Time« or »Pro-
gram« by pressing »P+« or »P-«.
Timer
Clock
08:24
On Time
Off Time
Alarm Time
Program
––:––
––:––
––:––
P1 ARD
3
4
Enter the switch-on time, switch-off time or alarm time and
TV station with »1…0«.
Press »i« to finish the setting.
Note:
You can switch off the alarm tone by pressing »i«.
0-9
OK
İ
● Back
i
Exit
●
16
Download from Www.Somanuals.com. All Manuals Search And Download.
______________
CONVENIENCE FUNCTIONS
Parental lock
You can block any station. The screen goes black.
1
Press »i« to open the »MAIN MENU«.
Channel Settings
System
Channel
Search
Fine Tune
Prog No
Child Lock
Store
– The »MAIN MENU« appears.
BG
C 06
< >
0
P1
Off
2
3
4
Select »Channel Setting« by pressing »P+« or »P-«.
Select »Child Lock« with »P+« or »P-«.
Autoprogram
Press » « or » « to activate or deactivate the parental lock
Ǹ
Ƿ
(On) or (Off).
Press »i« to finish the setting.
OK
İ
● Back
5
i
Exit
●
TV Guide
TV Guide provides you with information about the current and the
next broadcast.
Who offers TV Guide?
Certain stations – Kabel 1, for example – offer this service for
almost all TV programs.
How TV Guide works
The station information is »loaded« once you have selected the pre-
set for the programme provider.
Transferring all information to the television is somewhat time-con-
suming, but you can call up the most current information in just a
few minutes.
Notes:
Operation with a satellite receiver is not possible with TV Guide.
If you change the station position during the time the device uses for
data transfer, it is possible that not all information will be loaded.
TV Guide settings
1
2
3
Call up the »MAIN MENU« by pressing »i«.
Settings
Language
Timer
Select the line »Settings« and confirm by pressing »OK«.
TV Guide
Select the line »TV Guide« by pressing »P+« or »P-« and con-
firm by pressing »OK«.
Select
OK
İ
● Back
Note:
i
Exit
●
Additional operations are explained in the following sections.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
______________
CONVENIENCE FUNCTIONS
Changing stations
Check to see which television programme (provider) offers service
for TV Guide.
TV Guide
Date
Provider
Station Match
Display Info
10.12.2004
P13 Kabel
ARD
1
2
Select »Provider« by pressing »P+« or »P-«.
On
Select the television station (provider) by pressing » « or »
and confirm by pressing »OK«.
«
Ǹ
Ƿ
OK
İ
● Back
i
Exit
●
3
Exit settings by pressing »i«.
Switching the station, name display on/off
If you switch off the station name display, this information is not
shown when switching the programme presets.
TV Guide
Date
Provider
Station Match
Display Info
1
2
3
Select the line »Display Info« by pressing »P+« or »P-« and
confirm by pressing »OK«.
10.12.2004
P13 Kabel
ARD
On
Activate (On) or deactivate (Off) the function by pressing »
«
Ǹ
or » «.
Ƿ
OK
İ
Exit the setting by pressing »i«.
● Back
i
Exit
●
Assigning television stations (station matching)
You will need to use the station matching function if stations are not
recognised by TV Guide.
In the »Station Match« line these are designated as »None«.
1
Select the program that you would like to assign by pressing
»P+« or »P-«.
Settings
Language
Timer
2
3
4
Call up the »MAIN MENU« by pressing »i«.
TV Guide
Select the line »Settings« and confirm by pressing »OK«.
Select
OK
İ
● Back
Select the line »TV Guide« by pressing »P+« or »P-« and con-
firm by pressing »OK«.
i
Exit
●
TV Guide
Date
Provider
Station Match
Display Info
5
6
Select the line »Station Match« by pressing »P+« or »P-«.
10.12.2004
P13 Kabel
ARD
Select the station ID for the selected television station by
pressing» « or » « .
On
Ǹ
Ƿ
- If the station ID is not available at the selection, the station is
not supported by the provider.
OK
İ
● Back
i
Exit
●
7
Exit the setting by pressing »i«.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
_______________
USING EXTERNAL DEVICES
Decoder or satellite receiver
In order for the television to receive encoded programs from a
privately operated station, a decoder is needed.
Connecting a decoder or satellite receiver
Decoder
AV
AV
2
1
PAY-TV
1
Connect the »AV1« socket on the television set and the appropriate
socket on the decoder using a EURO-AV cable.
Notes:
A satellite receiver can also be connected to this socket.
If you want to use both a satellite receiver and a decoder, the
decoder must be connected to the satellite receiver.
Using a decoder
1
Switch on the television and the decoder.
2
Select the »AV1« preset channel by pressing »AV« repeatedly
until »AV1« appears on the screen.
Headphones
Connecting headphones
1
Insert the headphone jack (3.5 mm ø jack plug) in the head-
phone socket on the television.
R
AUDIO
L
EO
ID
V
S
S-VH
Adjusting the headphone volume
1
Press » « to mute the television sound.
p
2
Press » « or » « to adjust the headphone volume.
Ǹ
Ƿ
19
Download from Www.Somanuals.com. All Manuals Search And Download.
_______________
USING EXTERNAL DEVICES
Video recorder, DVD player or SET-TOP box
Connecting the video recorder, DVD player or
SET-TOP box
AV
2
AUDIO OUT
DIGITAL AUDIO OUT
VIDEO OUT
L
EURO
AV
TV
10-240
50/60Hz 20
V
W
~
S
VIDEO OUT
1
Connect the »AV1« or »AV2« television sockets and the corre-
sponding sockets of the video recorder, DVD player or the SET-
TOP box with a Euro-AV (Scart) cable.
Using a video recorder, DVD player or SET-TOP box
1
Switch on the video recorder, DVD player or SET-TOP box and
select the function you wish to use.
2
Select the »AV1« or »AV2« channel positions with »AV«.
– You can hear and see the video and audio information from
the video recorder or the SET-TOP box on the television set.
Connecting the SVHS video recorder
If you own a SVHS video recorder, you can connect it using a
Euro-AV cable to the »AV2« socket.
Using a SVHS video recorder
1
Switch on the video recorder and select the function you wish
to use.
2
Select the »AV2S« preset channel with »AV«.
– You will see the picture and hear the sound of the video
recorder on the television.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
_______________
USING EXTERNAL DEVICES
Camcorder
1
Connect the yellow socket (VIDEO – picture signal) on the tele-
vision and the corresponding socket on the camcorder (VHS,
Video 8) with a cinch cable;
PR
VO
L
or
R
DIO
EO
U
A
connect the S-VHS socket (S-VIDEO – picture signal) on the
television and the corresponding socket on the camcorder (S-
VHS, Hi 8) with a cinch cable.
L
VID
S-VHS
2
Connect the white and red sockets (L AUDIO R – sound signal)
on the television and the corresponding sockets of the camcor-
der with a cinch cable.
Note:
If a mono camera is connected, connect the white socket (L)
of the television and the corresponding socket of the camera. Sel-
ect »Mono« in the »Sound« menu during mono operation.
Operating with a camcorder
1
Switch on the camcorder, insert a cassette and start playback.
2
Select the preset channel »AV3« (for VHS, Video 8) or »AV3-S«
(for S-VHS, Hi 8), by pressing »AV« repeatedly until »AV3« or
»AV3-S« appears in the screen.
– You will see the picture and hear the sound of the camcorder
on the television.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________
SPECIAL SETTINGS
Setting television channels
This setting is only necessary if a new channel comes on air and you
do not want to change the order of your channels. The television
channel can be set directly or using the search.
MAIN MENU
Setting channels using the search
Sound
1
Press »i« to open the »MAIN MENU«.
Picture
– The »MAIN MENU« appears.
Preset List
Channel Settings
Settings
2
Select »Channel Settings« with »P+« or »P-« and confirm with
»OK«.
– The »Channel Settings« menu appears.
Select
OK
İ
i
Exit
●
3
4
Select »Prog No« with »P+« or »P-« and set the preset channel
with » « or » «.
Ǹ
Ƿ
Channel Settings
Select »Search« with »P+« or »P-« and start the search with
« or » «.
System
Channel
Search
BG
C 06
< >
0
P1
Off
»
Ǹ
Ƿ
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel
you want appears on the screen.
Fine Tune
Prog No
Child Lock
Store
Autoprogram
Note:
The current system is automatically displayed in the »System«
line. Select »System« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with » « or » «.
OK
İ
● Back
i
Exit
●
Ǹ
Ƿ
5
6
Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
Channel Settings
System
Channel
Search
Fine Tune
Prog No
Child Lock
Store
BG
C 06
< >
0
P1
Off
Note:
To set other television stations, repeat steps 3 to 5.
Press »i« to finish the setting.
Autoprogram
Store
OK
İ
● Back
i
Exit
●
22
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________
SPECIAL SETTINGS
Fine tuning television channels
The television automatically tunes itself to the best possible recepti-
on. You may need to carry out manual fine tuning in areas where
there is poor reception.
1
Press »i« to open the »MAIN MENU«.
Channel Settings
System
Channel
Search
Fine Tune
Prog No
Child Lock
Store
– The »MAIN MENU« appears.
BG
C 06
< >
0
P1
Off
2
Select »Channel Settings« with »P+« or »P-« and confirm with
»OK«.
– The »Channel Settings« menu appears.
Autoprogram
3
4
5
Select »Fine Tune« with »P+« or »P-« and set it with »
«
Ǹ
or » «.
Ƿ
OK
İ
● Back
i
Exit
●
Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
Press »i« to finish the setting.
Setting the television channels by entering the
channel numbers
MAIN MENU
Sound
Picture
1
Press »i« to open the »MAIN MENU«.
Preset List
Channel Settings
Settings
– The »MAIN MENU« appears.
2
Select »Channel Settings« with »P+« or »P-« and confirm with
»OK«.
– The »Channel Settings« menu appears.
Select
OK
İ
i
Exit
●
3
Select »Prog No« with »P+« or »P-« and set the
channel with » « or » «.
Ǹ
Ƿ
Channel Settings
4
5
Select »Channel« with »P+« or »P-« and confirm with »OK«.
System
Channel
Search
Fine Tune
Prog No
Child Lock
Store
BG
C 06
< >
0
P1
Off
Press »OK« to choose between »S« (special channel) and »C«
(channel).
6
Press » « or » « to switch up and down channels or use
»1…0« to enter the channel number directly.
Ǹ
Ƿ
Autoprogram
0-9
C/S
Note:
OK
İ
● Back
i
Exit
●
The current system is automatically displayed in the »System«
line. Select »System« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with » « or » «.
Ǹ
Ƿ
Channel Settings
System
Channel
Search
Fine Tune
Prog No
Child Lock
Store
BG
C 06
< >
0
P1
Off
7
8
Select »Store« with »P+« or »P-« and confirm with »OK«.
Note:
To set other television stations, repeat steps 3 to 7.
Autoprogram
Press »i« to finish the setting.
Store
OK
İ
● Back
i
Exit
●
23
Download from Www.Somanuals.com. All Manuals Search And Download.
______________________________
SPECIAL SETTINGS
Re-tuning all television channels
You can re-tune all the television stations, for example if you move
to another town.
1
Press »i« to open the »MAIN MENU«.
Channel Settings
System
Channel
Search
Fine Tune
Prog No
Child Lock
Store
– The »MAIN MENU« appears.
BG
C 06
< >
0
P1
Off
2
Select »Channel Settings« with »P+« or »P-« and confirm with
»OK«.
– The »Channel Settings« menu appears.
Autoprogram
3
4
Select »Prog No« with »P+« or »P-« and using » « or »
«
Ǹ
Ƿ
0-9 -/--
enter the channel numbers from the point they should be saved.
OK
İ
● Back
i
Exit
●
Select »Autoprogram« with »P+« or »P-« and confirm with
»OK«.
– The »Country Selection« menu appears.
Country Selection
Belgium
Czech Rep.
Danmark
Deutschland
Eλλaδa
Hungary
Ireland
Italia
Netherlands Sverige
Norge
Portugal
Schweiz
Suomi
5
Select the country using »P+«, »P-«, » « or » « and confirm
Ǹ
Ƿ
with »OK«.
Türkiye
U.K.
...........
– The automatic search may last a few minutes, depending on
the number of television channels received.
España
France
Österreich
Polska
Note:
Start Autoprogramming
OK
İ
You can interrupt the search by pressing »i«.
● Back
i
Exit
●
24
Download from Www.Somanuals.com. All Manuals Search And Download.
_____________________________________
INFORMATION
Technical data
Mains voltage:
230 V, 50/60 Hz
Power consumption: In standby mode 2 W
Switched on 51 W
Sound output:
2x14 Watts music
Reception ranges:
C01 ... C99, special channels S01 ... S41,
frequency band 1 ... 4
Channel positions: 100 und 4 AV
Service information for dealers:
The product complies with the following EU directives:
73/23/EEC directive for electrical equipment to be used within
defined voltage ranges. 89/336/EEC directive on electromagnetic
compatibility.
The television set complies with the following standards: EN 60065,
EN 55013, EN 55020
Environmental note
This product has been made from high-quality parts and materials
which can be re-used and recycled.
Therefore, do not throw the product away with normal household
waste at the end of its life. Take it to a collection point for recycling
electrical and electronic devices. This is indicated by this symbol on
the product, in the operating manual and on the packaging.
Please find out about collection points operated by your local autho-
rity.
Help protect the environment by recycling used products.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
_____________________________________
INFORMATION
Troubleshooting
If the remedies given below do not work, please consult an authori-
sed GRUNDIG dealer. Please bear in mind that malfunctions can
also be caused by external devices such as video recorders or satel-
lite receivers.
Fault
Possible cause
Remedy
Screen lit (snow), but no
station
Antenna cable
Is the antenna cable
connected?
No television station pro-
grammed
Start the station search
Poor picture contrast
Picture settings incorrectly Adjust the brightness,
set
contrast or colour setting
Test with another channel
Problem at station
Interference to picture
and/or sound
Interference from other
devices
Change the position of the
device
Ghosts, reflection
Channel setting
Automatic or manual chan-
nel setting/fine tuning
Antenna
Have antenna cable or
system checked
No colour
Colour intensity at minimum Turn up the colour
TV standard setting (if Select the correct colour
setting option is available) standard
Problem at station
Test with another channel
Inappropriate colour,
colour spots
Strong magnetic field due, Move the loudspeakers
for example, to loudspea- away from the television.
kers
If colour spots remain,
switch off the television set
at the mains and switch on
again after 10 minutes
Volume set to minimum
Turn up or switch on the
volume
Picture but no sound
Problem at station
Test with another channel
Test another channel for
Television station (has no
teletext) or antenna system fine tuning and ghosts
Teletext missing or faulty
Station signal too weak
No optical connection
Check the antenna system
Point the remote control at
the television set
Remote control does not
work
Remote control batteries
Check the batteries, change
if necessary
Operating condition unde- Switch off the television
fined
with the main power button
for approximately
2 minutes
Parental lock has been
activated
Switch off the parental lock
The picture is unrecognisa-
ble after switching on the
television
26
Download from Www.Somanuals.com. All Manuals Search And Download.
_____________________________________
INFORMATION
Additional Information for units sold in the UK.
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains
supply.
The range of multi-system receivers is built to work in most European coun-
tries. However, the mains plug and socket system for the UK differs from
many European countries.
This appliance has been supplied with a fitted, non-removable, approved
converter plug for use in the UK. This converter plug is fitted with a 5A rated
fuse.
In case this appliance is supplied with a moulded 2-pin Euro plug only,
which is unsuitable for UK operation, this must be cut off and immediately
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a
qualified electrician.
Note:
The severed Euro plug must be destroyed to avoid a possible shock
hazard should it be inserted into a socket elsewhere.
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any
other type of plug is used it must be protected by a 5A fuse either in the
plug, or at the distribution board. If this type of plug becomes defective,
ensure that the fuse is removed before disposal, to eliminate potential shock
hazard.
If it is necessary to change the fuse in the non-rewireable plug, the correct
type and rating (5A ASTA or BSI approved BS1362) must be used and the
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and
plug must not be used until a replacement is obtained. Replacement fuse
covers should be obtained from your dealer.
Important:
The wires in the mains lead are colour coded in accordance with the follo-
wing code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not cor-
respond with the coloured marking identifying terminals in your plug, pro-
ceed as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter “N”
or coloured black.
Connect the BROWN coloured wire to the plug terminal marked with the let-
ter “L” or coloured red.
In no circumstance must any of the wires be connected to the terminal mar-
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-
low.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Grundig Multimedia B.V. • Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam •
Download from Www.Somanuals.com. All Manuals Search And Download.
|