Grundig Blu ray Player GBP 7000 3D User Manual
Blu-ray Player  
GBP 7000 3D  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SET-UP-AND-SAFETY------------------------------------------------------------------------------------------------  
7
Please note the following instructions when set-  
ting up the system:  
Always keep the disc compartment closed to  
prevent dust from collecting on the laser optics.  
7
7
The device is designed for the playback of  
Do not use cleaning agents as they may dam-  
age the housing. Clean the device with a  
clean and dry cloth.  
video and audio signals from compact discs,  
USB and similar data devices. Any other use is  
expressly prohibited.  
Notes:  
7
7
If you want to set up the device on wall shelves  
Do not connect any other equipment while  
or in cupboards, please ensure that it is ad-  
equately ventilated. There must be at least 10  
cm of space at the side, above and behind the  
device.  
the device is switched on. Switch off the oth-  
er devices as well before connecting them.  
7
Only plug the device into the mains socket  
after you have connected the external de-  
vices. Make sure the power plug is freely  
accessible.  
7
Do not cover the device with newspapers,  
table cloths, curtains, etc.  
7
When setting up the device, remember that  
furniture is often coated with various types of  
varnish and plastic, which often contain chemi-  
cal additives. These additives may cause cor-  
rosion to the feet of the unit. This may leave  
stains on the surface of the furniture which can  
be difficult or impossible to remove.  
7
If the device is exposed to sudden changes in  
temperature, for example when taken from the  
cold into a warm room, wait at least two hours  
before using it.  
7
The device is designed for use indoors. If you  
use it outdoors, make sure it is protected from  
moisture such as dripping or splashing water.  
7
Use the device only in a moderate climate.  
7
Do not place the device close to heating units  
or in direct sunlight, as this will impair cooling.  
7
Do not place any vessels containing liquids,  
such as vases, on the device. Do not insert any  
foreign objects in the disc compartment.  
7
Do not place any objects such as burning can-  
dles on the device.  
7
Do not open the device casing under any cir-  
cumstances. Warranty claims are excluded for  
damage resulting from improper handling.  
7
Thunderstorms are a danger to all electrical  
devices. Even if the device is switched off, it  
can be damaged by a lightning strike to the  
mains. Always disconnect the mains plug dur-  
ing a storm.  
3-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GBP-7000-3D--------------------------------------------------------------------------------------------------------------------------  
7
Access to BD-Live functions, with internet con-  
Packing-contents  
nection and an additional memory (if avail-  
able on the Blu-ray Disc).  
Blu-ray disc player  
Remote control  
2 batteries  
(Micro, R03/UM 4/AAA, 2 x 1,5 V)  
User manual  
HDMI cable  
7
The device supports NetFusion. This allows  
you to combine media streaming with control-  
ling a connected media receiver while stream-  
ing content to it from another PC on a network.  
7
7
7
The MP3 and WMA music data formats can  
also be played back via USB input or Audio  
CDs.  
GBP 7000 3D  
BD Player  
It is possible to display digital photograph  
files that have been burned onto a data disc,  
DVD+/-R, DVD+/-R/(W) or a Blu-ray Disc.  
The DIGI LINK  
Two batteries  
Your player is equipped with the DIGI  
LINK function. This function uses the  
CEC (Consumer Electronics Control)  
HDMI cable  
User manual  
Remote Control  
protocol.  
CEC allows external devices which are con-  
nected to the »HDMI« sockets by an HDMI  
cable (e.g. Blu-ray Disc player and LCD/LED-TV)  
to be operated with a remote control.  
Prerequisite is that the devices connected sup-  
port CEC. Read the user manual for the LCD/  
LED-TV to find out how to activate the corre-  
sponding function.  
Special-features  
7
Grundig Blu-ray Disc player provides high def-  
inition video playback at up to 1080 p resolu-  
tion for an amazing viewing experience.  
7
7
3D playback with the latest technology in 3D  
Blu-ray Discs when connected to a 3D compat-  
ible LED/LCD-TV.  
Upconversion of standard definition DVDs for  
enhanced picture quality at up to 1080 p over  
an HDMI connection.  
7
7
Rich multi channel surround sound.  
Easy and simple HDTV connection using a sin-  
gle HDMI cable.  
7
7
Digital and analogue outputs for connecting  
your home theater system or amplifier.  
PIP functionality that lets you display primary  
and secondary video at the same time (if  
available on the Blu-ray Disc).  
7
7
Pop-up menu display without interrupting play-  
back (if available on the Blu-ray Disc).  
HDMI 1080 p /50 fps output (Blu-ray Disc  
only) that provides smooth playback of video  
with a frame rate of 50 frames per second (TV  
must be connected with an HDMI cable and  
be compatible with 1080 p 50 frame).  
4- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GBP-7000-3D--------------------------------------------------------------------------------------------------------------------------  
Notes:  
Disc-type  
Logo  
7
Writable DVD discs (DVD-RW, DVD-R) must  
be finalized; only VR-mode is allowed. Play-  
back may not work for some types of discs,  
or when specific operations, such as angle  
change and aspect ratio adjustment, are be-  
ing performed. Information about the discs  
is written in detail on the box. Please refer to  
this if necessary.  
3D Blu-ray Disc  
Blu-ray Disc  
DVD-video Disc  
(DVD-ROM)  
7
Do not allow the disc to become dirty or  
scratched. Fingerprints, dirt, dust, scratches  
or deposits of cigarette smoke on the record-  
ing surface may make it impossible to use  
the disc for playback.  
DVD-RW  
DVD+RW  
DVD-R  
7
7
CD-R/-RW, DVD-RW/-R recorded with UDF  
or ISO9660 format can be played back.  
Windows Media Audio (WMA) files must  
be written to the disc with a .wma file exten-  
sion in order to be recognized and played  
back properly.  
DVD+R  
WMA  
7
JPEG picture files must be written to the disk  
with an .jpeg or .jpg file extension in order  
to be recognized and played back prop-  
erly.  
JPEG  
MPEG4  
CD-R  
CD-RW  
5-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW-----------------------------------------------------------------------------------------------------------------------------------  
The-Blu-ray-player-controls  
The-front-of-the-device-  
!
9
e
.
GBP 7000 3D  
Disc-compartment-  
IR-sensor  
Display  
Power-indicator  
USB  
Disc-com-  
p- artment  
- -Compartment for BDs/ CDs.  
9
Switches the device on from standby  
mode and off again.  
Infra-red sensor for remote  
control signals.  
-
-
Plays next title, chapter, track or file if  
exists.  
•
Power--  
indicator  
Display of the device.  
Plays previous title, chapter, track or  
file if exists.  
Lights up when the device is at  
standby mode.  
Starts and pauses playback.  
-
USB socket for connecting  
MP3 player, a USB memory  
stick or a card-reading device.  
.
Opens or closes the disc compart-  
ment.  
The-back-of-the-device  
GBP 7000 3D  
BLU-RAY DISC PLAYER  
AC:110-240 50/60 Hz  
V
~
W
POWER:17  
SN  
GLR 5900  
110-240-V-50/60-Hz  
Ethernet HDMI-OUT  
VIDEO-OUT  
COAXIAL  
WLAN-ANTENNA  
AUDIO-OUT-L/R  
110---240-V-  
50/60-Hz  
Power cord.  
VIDEO-OUT  
Video output socket for  
connecting a LED/LCD-  
TV or AV receiver with an  
RCA socket.  
ETHERNET  
Socket for connecting the  
internet.  
COAXIAL  
Audio output socket (coax-  
ial) for connecting a dig-  
ital multi-channel audio/  
video amplifier.  
HDMI-OUT  
Video/audio output socket  
(digital signal) for connect-  
ing LED/LCD-TV.  
Audio output sockets (left/  
right analogue channel)  
for connecting an audio  
system.  
AUDIO- OUT-  
L/R  
WLAN-ANTENNA Antenna for wireless inter-  
net reception.  
6- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW-----------------------------------------------------------------------------------------------------------------------------------  
9
Switches the device on from  
standby mode and off again.  
The-remote-control-  
Opens or closes the disc com-  
partment.  
1---0-  
-Number buttons for various data.  
SEARCH-  
-Press repeatedly to switch be-  
tween search modes: title, chap-  
ter and time. Then use number  
buttons and »ENTER« button to  
select the point you want to play.  
RETURN-  
-Press to return to the previous  
menu during the settings or the  
folder or menus when playing a  
WMA/MP3/JPEG disc.  
OSD  
-Shows current playback status  
and time information.  
SUBTITLE  
-Press to enable/disable subtitles  
during BD/DVD playback. If the  
disk has more than one subtitle  
language, use the cursor buttons  
to select the subtitle languages  
and press »ENTER« to confirm.  
A-B-  
-During playback, press once to  
store a “start point” for repeating  
playback. Press again to select  
an “end point”, then the play-  
back repeats from the beginning  
to the end (not available on all  
disks). The third press cancels  
this function.  
REPEAT-  
-Cycles through the possible re-  
peat modes based on content  
played.  
3 -  
R- ewinds the playback to the be-  
ginning.  
4-  
F- ast forwards the playback to  
the end.  
-
-
Plays previous title, chapter, track  
or file if exists.  
Plays next title, chapter, track or  
file if exists.  
7-  
Stops the playback.  
-
-Starts or pauses playback.  
7-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW-----------------------------------------------------------------------------------------------------------------------------------  
!8-  
-Frame-by-frame playback.  
DISC-MENU- -Immediately stops playback and  
brings up the main or 'top' menu  
of the BD or DVD disc. (Not  
available on all discs). In the  
main menu, you can typically  
choose subtitle language, audio  
track, or different scene etc.  
--On BD discs: to bring up the  
main movie menu (not available  
on all discs).  
POPUP-MENU-  
TITLE-MENU  
aASs -Cursor buttons, select various  
functions in the menus.  
ENTER-  
SETUP  
ANGLE  
-Confirms selected functions in  
the menus.  
-Opens the settings menu of the  
device.  
-Selects various camera angles  
for certain scenes or passages  
on the BD and DVD during play-  
back (not available on all discs).  
-The red, green, yellow and blue  
buttons start disc-specific fea-  
tures on some BD discs (if avail-  
able on the Blu-ray Disc).  
COLOR-  
BUTTONS  
RESOLUTION- At stop mode, sets the video out-  
put resolution (your TV should  
support setting the resolution.  
Please refer to your TV's user  
manual).  
PIP-  
Opens the PIP function.  
--During PIP playback, press to set  
the audio of the second video.  
SECONDARY-  
AUDIO  
MUTE-  
Mutes the sound.  
ZOOM-  
Zooms in on scenes during play-  
back (only DVD).  
–-VOLUME-+- Sets the volume.  
AUDIO- During playback, press to set the  
audio channel.  
8- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION-AND-PREPARATION----------------------------------------  
Notes:  
Connecting-the-LED/LCD-TV-using-  
7
Do not connect any other equipment while  
RCA-cables  
the device is switched on.  
Switch off the other equipment as well be-  
fore connecting it.  
Television  
BD Player  
7
Only plug the device into the mains socket  
after you have connected the external de-  
vices.  
Connecting-the-LED/LCD-TV-using-  
an-HDMI-cable-  
To video input (yellow)  
To audio inputs (red,white)  
Television  
BD Player  
1 Connect a standard cinch cable into the  
»VIDEO-OUT« socket on the back of the  
device and the corresponding socket (VIDEO  
IN) on the LED/LCD TV.  
2 Connect standard cinch cables into the  
»AUDIO-OUT-L/R« sockets on the back of  
the device and the appropriate sockets  
(AUDIO IN) on the LED/LCD TV.  
1 Connect the HDMI cable enclosed into the  
»HDMI« socket on the back of the device and  
Connecting-a-digital-audio--  
system-with-a-coaxial-cable  
the corresponding socket (HDMI) on the LED/  
LCD TV.  
Television  
BD Player  
To Video input  
Amplifier  
To Coaxial-  
digital audio  
input  
Coaxial cable  
1 Connect a coaxial digital cable into the  
digital output »COAXIAL« on the back of the  
device and into the corresponding socket of  
the digital amplifier.  
9-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION-AND-PREPARATION----------------------------------------  
Connecting-an-MP3-player-or-a-  
USB-memory-stick  
Connecting- to- the- internet- with-  
ethernet-cable  
Splitter  
Modem Router  
GBP 7000 3D  
Telephone socket  
BD Player  
1 Connect the Ethernet socket of the modem/  
router to the »ETHERNET« socket of the de-  
vice using a standard network cable (Twisted  
pair, RJ45 plug).  
Note:  
7
The device must be switched off while the  
USB connection is being made. If it is not  
switched off, data can be lost.  
– The data throughput level is 10/100 Mbit.  
1 Switch off the device by pressing »9«.  
Connecting-to-the-internet-with-  
wireless-antenna  
2 Connect the USB interface of the MP3 player  
to the »  
« socket on the device, using a  
standard USB cable;  
or  
insert the USB plug of the USB memory stick in  
the »  
« socket on the device.  
Notes:  
7
To remove the MP3 player or the USB mem-  
ory stick, switch off the device and pull out  
the cable for the data medium.  
7
The USB socket on the device does not sup-  
port a connection for a USB extension cable  
and is not designed for directly connecting  
to a computer.  
1 To activate the »WLAN-ANTENNA«, unplug  
the network cable from the »ETHERNET«  
socket.  
– The leds on the »WLAN-ANTENNA«  
start blinking.  
Note:  
7
-The network configuration and connection  
method may vary depending on the equip-  
ment in use and the network environment.  
The player is equipped with an IEEE 802.11n  
wireless module, which also supports the  
802.11b/g standards. For the best wireless  
performance, you should use IEEE 802.11n  
certifiedWLANnetwork(accesspointorwire-  
less router).  
10- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION-AND-PREPARATION----------------------------------------  
Connecting-to-the-mains-supply  
Notes:  
Putting- batteries- in- the- remote-  
control  
7
Check that the mains voltage on the type  
plate (on the back of the device) corre-  
sponds to your local mains supply. If this is  
not the case, contact your specialist dealer.  
2
7
Before connecting the AC power cord to the  
1
3
wall socket, ensure that all other connec-  
tions have been made.  
1 Open the battery compartment by pressing  
down on the catch and then remove the lid.  
2 Observe the polarity marked on the base of  
the battery compartment when inserting the  
batteries (micro batteries, 2 x 1.5 V, R 03/  
UM 4/AAA).  
1 Plug the power cord into the wall socket.  
Caution:  
7
The device is connected to the mains with  
3 Close the lid of the battery compartment.  
the power cord. Pull out the power plug if  
you want to completely disconnect the de-  
vice from the mains.  
Notes:  
7
Do not expose the batteries to extreme heat,  
7
Make sure the power plug is easily acces-  
caused for example by direct sunlight, heat-  
ers or fire.  
sible during operation and not hindered by  
other objects.  
7
Remove the batteries when they are flat or  
when you know that the device will not be  
used for a long period of time. The manufac-  
turer accepts no liability for damage caused  
by leaking batteries.  
Environmental-note:  
7
Batteries, including those which do not con-  
tain heavy metal, should not be disposed  
of with household waste. Always dispose  
of used batteries in accordance with local  
environmental regulations.  
11-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL-SETUP-----------------------------------------------------------------------------------------------------------------------  
Switching-on-the-Blu-ray-player  
If you connect the device to the mains, it  
switches to standby.  
First-installation-by-using-the-  
Quick-Setup  
Use the »Quick Setup« function to make the ini-  
tial settings.  
1 Plug the power cord into the wall socket.  
If you need more settings, refer to the chapter  
"First installation by using the functions in the  
main menu", see next page.  
– The power indicator turns on.  
2 Press »9«.  
– The power indicator turns off.  
– Display: »HELLO«.  
1 Press »SETUP« to open the main menu.  
2 In the main menu select »Quick Setup« by us-  
ing »A« or »S« and press »ENTER« to con-  
firm.  
– -Display: »Would you like to do Quick Setup?  
Yes - No« appears.  
3 Switch on the LED/LCD-TV, select the input  
setting on the LED/LCD-TV that matches the  
connection method you used to connect the  
Blu-ray player.  
Menu-navigation-  
When you switch on the device, the main menu  
of the device automatically appears on the  
screen.  
3 Select »Yes« by using »a« or »s« and press  
»ENTER« to confirm.  
– -Display: »OSD Language Settings« menu  
appears.  
4 Select your language by using »A« or »S«  
and press »ENTER« to confirm.  
– -Display: »Resolution« menu appears.  
Quick Setup  
Settings  
Media  
5 Depending on the type of the TV connected to  
the device, select resolution by using »A« or  
»S« and press »ENTER« to confirm.  
NetFusion  
NetFusion  
– -Display: »TV Aspect« menu appears.  
6 Depending on the type of the TV connected to  
the device, select TV Aspect by using »A« or  
»S« and press »ENTER« to confirm.  
– -Display: »Quick Setup Complete! Exit« ap-  
pears.  
1 Use the cursor buttons »A«, »S«, »s« or  
»a« to move through the menu.  
2 Confirm your selection by pressing »ENTER«.  
BD-Live  
Language  
Display  
7 Press »ENTER« to exit the Quick Setup.  
OSD  
English  
Auto  
Audio  
Menu  
Audio  
Subtitle  
Auto  
Settings  
Language  
None  
Parental  
System  
Network  
3 Press »RETURN« to return to the main menu.  
12- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL-SETUP-----------------------------------------------------------------------------------------------------------------------  
First-installation-by-using-the-  
System  
Display  
Network  
functions-in-the-main-menu  
HDMI Status  
Connected  
1080P  
BD-Live  
Display  
HDMI preferred Format  
TV Type  
NTSC  
Selecting-the-language-of-the-  
screen-menu-  
1 Press »SETUP« to open the main menu.  
Settings  
Resolution  
HDMI Auto  
16:9 Wide  
Off  
TV Aspect  
Film Mode (1080p24)  
Deep Color  
Audio  
Language  
Parental  
Auto  
Bluray 3D Mode  
Automatic  
2 In the main menu select »Settings« by using  
»A« or »S« and press »ENTER« to con-  
firm.  
3 Choose the setting (»PAL« or »NTSC«) by using  
»A« or »S« and press »ENTER« to con-  
firm.  
3-Select »Language« by using »A« or »S«  
and press »ENTER« to confirm.  
Setting-the-HDMI-resolution  
BD-Live  
Language  
You can select the ideal setting for the con-  
nected LED/LCD-TV. The abbreviation behind  
the number means: »p« = progressive, »i« = in-  
terlace.  
Display  
OSD  
English  
Auto  
Audio  
Menu  
Audio  
Subtitle  
Auto  
Settings  
Language  
None  
Parental  
System  
The function can only be selected once the LED/  
LCD-TV is connected to the »HDMI« socket.  
Network  
1 In the »Display« menu select »Resolution« by  
using »A« or »S« and press »ENTER« to  
confirm.  
4 Select »OSD« by using »A« or »S« and  
press »ENTER« to confirm.  
System  
5 Select your language by using »A« or »S«  
and press »ENTER« to confirm.  
Please choose a new Resolution setting  
Network  
HDMI Audio  
1080p  
BD-Liv
6 Press »RETURN« to return to the »Settings«  
menu.  
1080i  
√
Displa
720p  
576p  
576i  
Audio  
Language  
Parental  
Adapting-the-Blu-ray-player-to-  
the-LED/LCD-TV  
Setting-the-TV-system-(TV-norm)  
Select »PAL« for LED/LCD-TV with the PAL system  
or »NTSC« for those with the NTSC system.  
2 Choose the setting (»HDMI Auto«, »1080p«,  
»1080i«, »720p«, »576p«, »576i« ) by using  
»A« or »S« and press »ENTER« to con-  
firm.  
1 In the »Settings« menu select »Display« by  
using »A« or »S« and press »ENTER« to  
confirm.  
2 Select »TV Type« by using »A« or »S« and  
press »ENTER« to confirm.  
13-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL-SETUP----------------------------------------------------------------------------------------------------------------------  
Note:  
Selecting-the-film-mode  
7
The output resolution is based on the type  
The movies are recorded on film at a rate of 24  
frames per second. However not all televisions  
can display 24 frames per second. Off can be  
selected for 50 frames per second format.  
of LED/LCD-TV connected to the device, as  
described in the table below:  
Correct  
Resolution  
Setting  
Only the HDMI output of the player is capable  
of supporting1080 p video output at any frame  
rate.  
LED/LCD-TV TYPE  
If your TV is a standard-defini-  
tion PAL TV (SD TV)  
If your TV is an enhanced-defini-  
tion TV (EDTV)  
If your TV is a high-definition TV  
(HDTV) capable of 720p only  
If your TV is a high-definition TV  
(HDTV) capable of 1080i only  
576i/480i  
576p/480p  
720p  
1 In the »Display« menu select »Film Mode  
(1080p24)« by using »A« or »S« and  
press »ENTER« to confirm.  
2-Choose the setting (»Auto«, »Off«) by using  
»A« or »S« and press »ENTER« to confirm.  
1080i  
Setting-deep-color  
If your TV is HDMI equipped,  
and if your TV is a high-defi-  
nition TV (HDTV) capable of 1080p  
1080p [any frame rate], and (HDMI)  
you are connected to your TV  
via HDMI,  
If your TV is HDMI equipped,  
and you are connected to  
your TV via HDMI, and you  
wish the BD player to set the  
output based on information  
exchanged between the TV  
and the player over the HDMI  
cable.  
HDMI 1.3 supports 10-bit, 12-bit and 16- bit  
(RGB or YCbCr) color depths while 8-bit was  
supported in previous versions. This expands the  
colors displayed from millions to billions, which  
is much more vivid than the previous.  
1 In the »Display« menu select »Deep color« by  
using »A« or »S« and press »ENTER« to  
confirm.  
2-Select »Auto« or »Off« by using the cursor but-  
tons and press »ENTER« to confirm.  
HDMI auto  
Selecting-the-Blu-ray-mode  
There are two options:  
– Automatic: If you select »Automatic«, 3D Blu-  
ray disc plays in 3D effect or 2D Blu-ray disc  
plays in 2D effect automatically.  
– Forced 2D: If you select »Forced 2D«, disc  
plays in 2D, regardless of whether it is 3D or  
2D.  
Selecting-the-TV-format  
The setting depends on your LED/LCD-TV. If you  
have a LED/LCD-TV with a 4:3 format, select the  
4:3 setting; if you have a LED/LCD-TV with a  
16:9 format, select the 16:9 setting.  
1 In the »Display« menu select »TV Aspect« by  
using »A« or »S« and press »ENTER« to  
confirm.  
1 In the »Display« menu select »Bluray 3D  
Mode« by using »A« or »S« and press  
»ENTER« to confirm.  
2 Choose the setting (»16:9 Wide«, »16:9 Pillar-  
box«, »4:3 Pan and Scan«, »4:3 Letterbox«)  
by using »A« or »S« and press »ENTER«  
to confirm.  
2 Choose the setting (»Automatic«, »Forced  
2D«) by using »A« or »S« and press »EN-  
TER« to confirm.  
End-settings-for-the-LED/LCD-TV  
1 Press »SETUP« to return to the main menu.  
14- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL-SETUP-----------------------------------------------------------------------------------------------------------------------  
6-Select »IP address« by using »A« or »S«  
and press »ENTER«.  
Enter the IP address by using the number but-  
Network-settings-by-using-  
wired-connection  
The device must be connected to a wired router  
with an ethernet cable.  
Please see chapter "CONNECTION AND PREP-  
ARATION".  
tons.  
Select »Ok« by using »S« and press  
»ENTER« to confirm,  
or select »Cancel« by using »s« and press  
1 Press »SETUP« to open the main menu.  
»ENTER« to cancel the setting.  
2 In the main menu select »Settings« by using  
»A« or »S« and press »ENTER« to con-  
firm.  
7-Select »Subnet Mask« by using »A« or »S«  
and press »ENTER«.  
Enter the Subnet Mask by using the number  
3 Select »Network« by using »A« or »S«  
and press »ENTER« to confirm.  
buttons.  
Select »Ok« by using »S« and press  
»ENTER« to confirm,  
or select »Cancel« by using »s« and press  
Language  
Network  
Parental  
Interface  
Wired  
»ENTER« to cancel the setting.  
Link Status  
Link Down  
00:22:84:fb:c 6c:65  
Manual  
System  
Network  
MAC Adress  
IP Mode  
8-Select »Gateway« by using »A« or »S«  
and press »ENTER«.  
Enter the Gateway address by using the  
number buttons.  
Select »Ok« by using »S« and press  
»ENTER« to confirm,  
Settings  
IP Adress  
0.0.0.0  
Subnet Mask  
Gateway  
0.0.0.0  
0.0.0.0  
BD-Live  
Display  
Primary DNS  
Secondary DNS  
Signal Strength  
Network Name (SSID)  
0.0.0.0  
0.0.0.0  
Good  
grinternet  
Audio  
4 Select »IP Mode« by using »A« or »S« and  
press »ENTER« to confirm.  
or select »Cancel« by using »s« and press  
»ENTER« to cancel the setting.  
5 Choose the setting (»Dynamic« or »Manual«)  
by using »A« or »S« and press »ENTER«  
to confirm.  
Note:  
7
-The primary and secondary DNS (Domain  
Name System) in the next setting are the  
network adresses of the server allocated by  
the provider.  
Notes:  
7
The IP Mode option provides two configura-  
tion modes for IP:  
9-Select »Primary DNS« by using »A« or  
»S« and press »ENTER«.  
Enter the Primary DNS by using the number  
– Dynamic – Enables DHCP, the addresses  
are automatically assigned by the router.  
– Manual – Requires user to config-  
ure network settings such as IP ad-  
dress, subnet mask, gateway, etc.  
It is able to show subnet mask, gateway,  
primary DNS, secondary DNS when "IP  
Mode" is set as "Manual".  
buttons.  
Select »Ok« by using »S« and press  
»ENTER« to confirm,  
or select button »Cancel« by using »s« and  
press »ENTER« to cancel the setting.  
7
If you choose the option "Dynamic", go to  
step 11.  
If you choose the option "Manual", continue  
with step 6).  
15-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL-SETUP-----------------------------------------------------------------------------------------------------------------------  
10-S- elect »Secondary DNS« by using »A« or  
»S« and press »ENTER«.  
4 Select »Network List« by using »A« or »S«  
and press »ENTER« to confirm.  
– Display: The list of available wireless net-  
works appears.  
Enter the Secondary DNS by using the  
number buttons.  
Select »Ok« by using »S« and press  
»ENTER« to confirm,  
Language  
Wireless  
Parental  
or select »Cancel« by using »s« and press  
»ENTER« to cancel the setting.  
Sy
Ne
Network List  
Settings  
11--Select »Apply« by using »S« and press  
»ENTER« to confirm the setting;  
or  
BD
Display  
Network Test  
Audio  
select »Cancel« by using »s« and press  
»ENTER« to cancel the setting.  
5 Select the wireless network you like by using  
»A« or »S« and press »ENTER« to confirm.  
12--If the connection is successful, »Network Test«  
appears.  
Note:  
End setting by using »ENTER«.  
7
If the network is encrypted, the wireless  
network password (security code WEP or  
WPA) screen appears.  
Network-settings-by-using-  
wireless-connection  
The device must be connected to a wireless  
router with the WLAN Antenna.  
Please see chapter "CONNECTION AND PREP-  
ARATION".  
6 Press »ENTER«, the keyboard appears.  
Select the first character of the password  
(capital and small letters, numbers, symbols)  
by pressing »A«, »S«, »a« or »s« and  
confirm by pressing »ENTER«. Repeat the pro-  
cedure for all characters.  
After you finish entering all characters, select  
the push button »OK« on the keyboard by  
pressing »A«, »S«, »a« or »s« and press  
»ENTER« to confirm.  
Note:  
7
The red led of the »WLAN Antenna« blinks  
when the antenna is active and the blue led  
blinks when the wireless connection is active.  
1 Press »SETUP« to open the main menu.  
2 In the main menu select »Settings« by using  
»A« or »S« and press »ENTER« to confirm.  
Notes:-  
7
You can choose between numbers, lower and  
upper case letters, and special characters.  
3 Select »Network« by using »A« or »S«  
and press »ENTER« to confirm.  
7
If you make a mistake during entry, press  
»A«, »S«, »a« or »s« to select the  
push button » « and press »ENTER« to  
confirm. The last character is deleted.  
Language  
Wireless  
Parental  
System  
Network  
Network List  
7 Select »Connect« to connect to the wireless  
network by using »A« or »S«,  
or select »Delete« by using »a« or »s« to de-  
lete the wireless network from the list;  
or select »Cancel« by using »a« or »s« to  
cancel the setting;  
Settings  
Manual  
BD-Live  
Display  
IP Settings  
Audio  
or select »Disconnect« by using »a« or »s«  
to disconnect from the wireless network;  
and press »ENTER« to confirm.  
16- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL-SETUP-----------------------------------------------------------------------------------------------------------------------  
5 Select the first character of the network name  
(capital and small letters, numbers, symbols)  
by pressing »A«, »S«, »a« or »s« and  
confirm by pressing »ENTER«.  
Repeat the procedure for all characters.  
After you finish entering all characters, select  
the push button »OK« on the keyboard by  
pressing »A«, »S«, »a« or »s« and press  
»ENTER« to confirm.  
– Display: ”»  
network name), Verifying Internet  
Connection…” appears.  
– Display: » «, if the connection is success-  
ful.  
« Connection to (WLAN  
8 Press »SETUP« to return to the main menu.  
Note:  
7
For the »IP Settings« and »Network test« set-  
tings, see “Network settings by using wired  
connection” section.  
Notes:  
7
-You can choose between numbers, lower  
and upper case letters, and special charac-  
ters by using the push buttons » « and »«  
in the keyboard.  
Manual-settings-in-wireless-  
connection  
1 At step 4 in “Network settings by using wireless  
connection” section, select »Manual« by using  
»A« or »S« and press »ENTER« to confirm.  
– Manual setting menu opens.  
7
-If you make a mistake during entry, press  
»A«, »S«, »a« or »s« to select the  
push button » « and press »ENTER« to  
confirm. The last character is deleted.  
6 Select »Password« by using »A« or »S«  
and press »ENTER« to confirm.  
– The keyboard appears.  
Language  
Manual  
Encryption  
Disabled  
7 Select the first character of the password  
(capital and small letters, numbers, symbols)  
by pressing »A«, »S«, »a« or »s« and  
confirm by pressing »ENTER«. Repeat the pro-  
cedure for all characters.  
Name  
Settings  
Connect Cancel  
Password  
Press ENTER to open keyboard  
!
Name is case-sensitive  
Audio  
After you finish entering all characters, select  
the push button »OK« on the keyboard by  
pressing »A«, »S«, »a« or »s« and press  
»ENTER« to confirm.  
2 Select »Encryption« by using »A« or »S«  
and press »ENTER« to confirm.  
3 Select the encryption from your wireless net-  
work by using »A« or »S« and press  
»ENTER« to confirm.  
8 Select »Connect« by using »S« and press  
»ENTER« to confirm,  
or select »Cancel« by using »s« and press  
4 Select »Name« by using »A« or »S« and  
press »ENTER« to confirm.  
– The keyboard appears.  
»ENTER« to cancel the setting.  
– Display: ”»  
« Connection to (WLAN  
network name), Verifying Internet  
Connection…” appears.  
– Display: » «, if the connection is success-  
ful.  
Language  
Manual  
S
9 Press »SETUP« to return to the main menu.  
IP-Settings  
Please refer to "Network settings by using wired  
connection".  
Audio  
17-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD/DVD-PLAYBACK-------------------------------------------------------------------------------------------------  
This item incorporates  
copyright protection  
technology that is pro-  
tected by U.S. patents  
and other intellectual  
Special-features-of-the-DVD  
You can recognise a  
DVD by the logo on the  
label.  
The discs have one or  
more tracks depending  
property rights. Use of this copyright protection  
technology must be authorized by Rovi Corpora-  
tion, and is intended for home and other limited  
viewing uses only unless otherwise authorized  
by Rovi Corporation. Reverse engineering or dis-  
assembly is prohibited.  
on the content of the DVD.  
Each track can contain one or more chapter. Se-  
lecting the track and chapter is simple and con-  
venient.  
You can control and direct playback of a DVD  
using the menu of the DVD player on the televi-  
sion screen.  
You can recognise a 3D  
Blu-ray disc by the logo  
on the label. The same  
copyright protection for  
Preparation  
1 Switch on the LED/LCD TV, select the input  
setting on the LED/LCD TV that matches the  
connection method you used to connect the  
Blu-ray player.  
Blu-ray Disc logo which  
is described above is also effective for Blu-ray  
3D Discs.  
Special-features-of-Blu-ray-Discs  
2 If an audio system or an AV receiver is con-  
nected to the Blu-ray player, switch it on and  
select the audio input for the Blu-ray player.  
The massive storage capacity of a Blu-ray (BD)  
Disc allows a far higher standard of picture and  
audio quality and a wealth of special effects and  
enhanced features.  
3 Switch on the Blu-ray player.  
– If there is no disc in the compartment,  
»NO DISC« appears after a short time.  
– If a disc has been inserted, it is scanned and  
»LOAD« appears.  
BLU-RAY AND JAVA  
This player features Java support, enabling you  
to get the most out of the latest Blu-ray Discs.  
When a BD disc is loaded, always explore the  
title menu to enjoy these extra features.  
Inserting-the-disc  
BLU-RAY AND HDMI  
1 Press » « to open the disc compartment.  
– Display: »OPEN«.  
HDMI is the only domestic medium capable of  
transmitting the huge volumes of data required  
by the very high picture resolutions and ad-  
vanced digital audio codecs that make Blu-ray  
such an exciting medium.  
2 Insert the disc in the compartment with its label  
facing upwards.  
3 Press » « to close the disc compartment.  
– Display: »CLOSE« and then »LOAD«; the disc  
is scanned and then the total duration of the  
disc is shown.  
PLAYING A BLU-RAY DISC  
Blu-ray Discs play very much like standard DVDs  
but with a very much higher level of interactivity.  
All the standard features of DVD player operate  
exactly the same but there are some differences.  
– The disc menu opens automatically.  
Note:  
7
Some disc menus direct you to set the menu  
language first. If that happens, select the  
language by using cursor buttons and press  
»ENTER«.  
18- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD/DVD-PLAYBACK-------------------------------------------------------------------------------------------------  
Playback  
Additional-playback-functions  
1 Select »Play« if this option is available by using  
the cursor buttons and press »ENTER«;  
or  
press » « to start playback.  
– The playback starts.  
Viewing-information-  
You can view information about the title, chapter,  
playing time and much more on the screen.  
1-Press »OSD« on the on the remote control.  
– Display: The information line appears.  
Note:  
7
If the message »Prohibited« appears on the  
television screen, the selected function is not  
possible with this disc.  
2-Press »OSD« on the on the remote control to  
deactivate the function.  
– Display: The information line disappears.  
2 Press » « to pause playback (freeze frame).  
3 Press » « to resume playback.  
Disc-menu-navigation-  
The disc may contain several titles and chapters  
you can choose from.  
4 Press »7« to interrupt playback.  
1 Press »DISC-MENU« on the remote control.  
– Main menu of the disc opens.  
5 Press » « to resume normal playback.  
6 To stop playback, press »7« twice.  
2 Select the title that you want by using the cur-  
sor buttons and press »ENTER« to confirm.  
Removing-the-disc  
1 Press » « to open the disc compartment.  
2 Remove the disc from the compartment.  
3 Press » « to close the disc compartment.  
3 In the selected title, choose the chapter or part  
that you want by using the cursor buttons and  
press »ENTER« to confirm.  
4 Press »DISC-MENU« on the remote control to  
return to the main menu of the disc.  
Adjusting-the-volume  
1-Adjust the volume by pressing »–-VOLUME-«  
or » VOLUME-+« on the remote control.  
Fast-forward-and-fast-reverse  
1 During playback, press »3« on the remote  
control to fast reverse,  
or press »4« on the remote control to fast  
forward through the disc.  
Muting  
1-Activate the mute with »MUTE« on the remote  
control.  
– Display: » -X Off«.  
Note:  
7
When you repeatedly press the button, each  
2-Deactivate the mute with » MUTE-« on the re-  
mote control.  
– Display: » -On«.  
time the fast forward or fast reverse mo-  
tion speed changes. The speed increases  
through the following sequence: Fast x 2,  
Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast  
x 64, Fast x 128.  
2 Press » « to resume normal playback.  
– Playback continues.  
19-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD/DVD-PLAYBACK-------------------------------------------------------------------------------------------------  
Selecting-previous-and-next-  
chapters  
Repeating-a-chapter-or-a-track  
(controlled by the Blu-ray Disc)  
1 During playback, press »  
vious chapter or press »  
chapter.  
– When you release the button, the device  
skips the current chapter and playback starts  
from the selected chapter.  
« to play the pre-  
« to play the next  
1 During playback, press »REPEAT« repeatedly  
to select a repeat mode: »Repeat Title«, »Re-  
peat Chapter«, »Repeat Off«.  
– Display: »  
is repeated.  
– Display: »  
Repeat Title«, the current title  
Repeat Chapter«, the current  
chapter is repeated.  
Search-functions  
2 To quit the function, press again »REPEAT«  
until »Repeat Off« appears on display.  
– Display: » Repeat Off «.  
1 Press »SEARCH« repeatedly to switch be-  
tween search modes: »Goto Title«, »Goto  
Chapter« and »Goto Time«.  
2-In the selected mode, press number buttons  
and »ENTER« button to select the point you  
want to play.  
Repeating-a-selected-section-  
(controlled by the Blu-ray Disc)  
1 During playback, press »A-B« to select a start  
point for a section to be repeated.  
Note:  
7
For example to select title 4, you should  
– Display: »  
Repeat A-«, the start point of  
press respectively the buttons »0«, »0«, »0«,  
»4«, »ENTER«.  
– Playback of the selected point starts au-  
tomatically.  
the section is selected.  
2 At the point you want to be the end point, press  
»A-B-« again to set the end point for the sec-  
tion to be repeated.  
Enlarging-or-reducing-the-picture  
(only DVD)  
– Display: »  
the section is selected. The selected section  
starts to be repeated.  
Repeat A-B«, the end point of  
1 Press »ZOOM« repeatedly to switch between  
»Zoom Off«, »Zoomx2 « and »Zoomx4«.  
– Display: » Zoom x2 «, the selected part  
of the picture is enlarged 2 times.  
3 To quit the function, press again »A-B« until  
»Repeat Off« appears on display.  
– Display: »  
Repeat Off «.  
– Display: » Zoom x4 «, the selected part  
of the picture is enlarged 4 times.  
Selecting-and-displaying-subtitles  
If the disc provides subtitles, they can be dis-  
played on your TV screen.  
If the subtitles are available in several languag-  
es, you can select the one you want.  
Note:  
7
You can move the picture with »a«, »s«,  
»A« or »S« on the screen.  
1 During playback, press »SUBTITLE« on the re-  
mote control.  
– »Subtitle« and »PIP Subtitle« menu appears.  
2 To quit the function, press again »ZOOM«  
until »Zoom Off« appears on display.  
– Display: » Zoom Off «.  
2 Select the Subtitle menu that you want by us-  
ing the cursor buttons and press »ENTER« to  
confirm.  
Frame-by-frame-playback  
1 During playback, press »!8« to advance  
the scene frame by frame.  
2 Press » «to resume playback.  
20- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD/-DVD-PLAYBACK-----------------------------------------------------------------------------------------------  
3 In the selected Subtitle menu, select the options  
that you want by using the cursor buttons and  
press »ENTER« to confirm.  
1 During playback, press »POPUP-MENU/  
TITLE-MENU« to open pop-up or title menu.  
2 Select the option that you want by using the  
cursor buttons and press »ENTER« to confirm.  
– Display: for example » 01/02 DEU«.  
4 To switch of the subtitles, select »Subtitle Off«  
at step 3 by using the cursor buttons and  
press »ENTER« to confirm.  
3 To quit the function, press »POPUP-MENU/  
TITLE-MENU« again.  
Selecting-the-camera-angle-for-par-  
ticular-scenes-or-passages  
Some discs provide scenes or passages which  
were filmed several times from different camera  
angles.  
Notes:  
7
You can set the subtitle from the disc menu  
also. Please see "Disc menu navigation" sec-  
tion.  
7
While playing video files from a USB or an  
1 During playback, press »ANGLE« on the re-  
mote control.  
– Angle menu appears.  
optical disc, to clearly obtain all the char-  
acters in subtitles, the subtitle file must be in  
UTF-8 format. The name of the video file and  
the subtitle file should be the same.  
2 Select the angle that you want by using the  
cursor buttons and press »ENTER« to confirm.  
– Display: for example »01/03«.  
In order to prepare UTF-8 format, you  
should do the following method:  
Playing-secondary-video-(Picture-in-  
picture-/-PIP)  
(controlled by the Blu-ray Disc)  
1 Open the .srt file in the NotePad applica-  
tion.  
2 Go to the "File" drop-down menu and se-  
1 During playback, press »PIP« on the remote  
control to turn on secondary video (picture in  
picture / PIP) function.  
– The secondary video playback appears on  
display.  
lect "Save As...".  
3 The file name and file type will remain the  
same.  
4 Under the Encoding section of this win-  
dow, select the "UTF-8" option from the  
drop-down menu.  
2 To quit function press »PIP« again.  
5 Click "Save" to keep your changes.  
Selecting-the-dubbed-language-for-  
the-PIP-function-  
Selecting-the-dubbed-language-or-  
the-audio-format  
These settings allow you to listen to a dubbed  
language other than the default one if the disc  
provides alternatives.  
(controlled by the Blu-ray Disc)  
1 During PIP playback, press »SECONDARY-  
AUDIO« on the remote control.  
– The secondary audio menu opens.  
2-Select »On« or »Off« by using the cursor but-  
tons and press »ENTER« to confirm.  
1 During playback, press »AUDIO« on the re-  
mote control.  
– »Audio« and »PIP Audio« menu appears.  
Using-the-color-buttons  
The RED, GREEN, YELLOW and BLUE buttons  
are used with interactive menus when operat-  
ing a BD-Video disc that includes JavaTM ap-  
plications (BD-J). For more information about  
operating this kind of a disc, please read the  
instructions that came with the disc.  
2 Select the dubbed language that you want by  
using the cursor buttons and press »ENTER« to  
confirm.  
Pop-up-menu/Title-menu  
If the disc provides pop-up or title menus, you  
can use this function.  
21-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD-LIVE-----------------------------------------------------------------------------------------------------------------------------------------------  
Some Blu-ray discs contain additional features  
Setting-up-the-player-for-BD-Live-  
that are made available to players that are con-  
internet-access  
nected to the internet, and have additional mem-  
ory added.  
1 Press »SETUP« to open the main menu.  
2 In the main menu select »Settings« by using  
»A« or »S« and press »ENTER« to con-  
firm.  
These additional features may include things like:  
– the ability to download new movie trailers,  
– additional "commentary" by actors and di-  
rectors,  
3 Select »BD-Live« by using »A« or »S« and  
press »ENTER« to confirm.  
– multiperson game play and chat.  
In order to access BD-Live functions, the player  
must be properly configured for BD-Live internet  
access, and it must be equipped with additional  
memory.  
4 Select »BD-Live Internet Access« by using  
»A« or »S« and press »ENTER« to con-  
firm. Make sure that the option »Limit Access«  
or »Always Allow Access« is selected.  
Adding-BD-Live-memory-to-the-  
5 Select »Limit Access« or »Always Allow Access«  
by using »A« or »S« and press »ENTER« to  
confirm.  
player  
1 Insert an at least 1Gbyte USB memory stick  
into a PC drive, and make sure that it is format-  
ted as FAT32.  
Note:  
7
Once the USB memory stick has been in-  
serted, if there is not at least 100 Mbyte of  
free space on the device, you should choose  
»Erase Blu-ray Storage« from the »BD-Live«  
setup menu item.  
2 Insert the USB plug of the USB memory stick in  
the »  
« socket on the device (see "CON-  
NECTION AND PREPARATION" section).  
6 Press »RETURN« and select »Network« by  
using »A« or »S« and press »ENTER« to  
confirm.  
Select »Network Test« by using the cursor but-  
tons and press »ENTER« to confirm.  
Note:  
7
The "Link Status" must show that you are con-  
nected to the internet, otherwise you can-  
not access BD-Live content on the web (see  
"CONNECTION AND PREPARATION/  
Connecting to the internet with ethernet ca-  
ble" section).  
7 Press »RETURN« to return to the main menu.  
22- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD-LIVE-----------------------------------------------------------------------------------------------------------------------------------------------  
Using-BD-Live  
1 Press » « to open the disc compartment.  
BD-Live-notes  
The Broadcom Reference system only supports  
7
the connection of USB memory in order to ful-  
fill the BD 2.0 1GByte memory requirement.  
2 Insert the Blu-ray Disc in the compartment with  
its label facing upwards.  
7
You must have the BD-Live disc in the player  
to play any related (already downloaded)  
content.  
3 Press » « to close the disc compartment.  
4 Press » « to start playback.  
5 During playback, press »POPUP- MENU/-  
TITLE- MENU« to open the pop-up or title  
menu.  
7
Some BD-Live content could expire and will  
not play. You may need to manually delete the  
contents in storage in order to have free space.  
To do this, select respectively: »Settings«, »BD-  
Live«, »Erase Blu-ray Storage«.  
6 Select »BD LIVE« by using »A«, »S«, »a«  
or »s« and press »ENTER« to confirm.  
– In a few minutes, the BD-Live Menu appears.  
7
A clock is not used to manage the expiration  
of downloaded BD-live content. Instead, time  
and expiration of content is managed by the  
BD-Live server on the internet.  
7 Select the content to download from the »Pre-  
views« sub menu. The download is depending  
on the content size and network speed.  
– The downloaded content is stored under  
»Media« – »USB« on the external USB  
memory stick. You can choose to either play-  
back or delete the downloaded content.  
23-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING-AUDIO/VIDEO-FILES---------------------------------------------------------  
Playing-a-title,-a-track-or-a-picture  
Playing-the-contents-of-a-data-  
device-or-a-USB-memory-stick  
1-Select »Videos«, »Music« or »Pictures« by us-  
ing »A« or »S« and press »ENTER« to  
confirm.  
Preparation  
1 Switch off the Blu-ray player with »8«.  
2-Chose the file from the selected option by us-  
ing »A« or »S« and press »ENTER« to con-  
firm.  
2 Connect a data device to the »  
using a standard USB cable;  
or  
« socket  
3-Press » « to start playback.  
– The selected file starts playing.  
insert the USB plug of the USB memory stick in  
the »  
« socket on the device.  
File 1/5 song1.mp3  
Title: Cool Track  
Artist: Ricardo Funiccio  
Album: Dead Dux  
3 Switch on the LED/LCD-TV, select the input  
setting on the TV that matches the connection  
method you used to connect the Blu-ray player.  
0:02:00  
Play  
0:30:00  
Off  
Off  
4-To stop playback, press »7«.  
4 Switch on the Blu-ray player with »8«.  
5 Press »SETUP« to open the main menu.  
Additional-playback-functions  
Press » « to pause playback.  
Press » « again to resume playback.  
7
6-Select »Media« by using »A« or »S« and  
press »ENTER« to confirm.  
– The external device menu opens.  
7
Select the playback speed during playback  
by pressing »3« or »4«.  
7
7
During playback, select the next track/picture  
Videos  
you want with »  
track/picture with »  
« or select the previous  
«.  
Music  
Media  
USB  
During playback, press »REPEAT« repeatedly  
to select a repeat/random mode:  
– »Repeat All«,  
Picture  
– »Random On«,  
– »Repeat File«,  
– »Repeat Off«.  
7-Confirm »USB« with »ENTER«;  
or  
select »USB« (if a disc is inserted – display  
»Optical Disc«) by using »A« or »S« and  
press »ENTER« to confirm.  
7
While playing back the picture, to enlarge the  
picture press »ENTER« repeatedly.  
Move the picture with »A«, »S«, »a« or  
»s« on the screen.  
7
To set slide show effects and slide show delay  
for pictures:  
press »POPUP-MENU-TITLE-MENU«,  
select »Slide Show Effects« or »Slide Show  
Delay« with »A« or »S«, press »ENTER«  
to confirm, select the required effect or the de-  
lay with »A« or »S« and press »ENTER«  
to confirm.  
24- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING-AUDIO/VIDEO-FILES---------------------------------------------------------  
Displaying-a-picture  
Playing-picture-CDs  
It is possible to display digital picture files or mu-  
sic files that have been burned onto a data disc,  
DVD+/-R, DVD+/-R/(W) or a Blu-ray Disc.  
1-Chose the required picture from the summary  
by using »A«, »S«, »a« or »s« and press  
»ENTER« to display.  
2-Press »7« to stop playback.  
Preparation  
1 Press » « to open the disc compartment.  
– Display: »OPEN«.  
Additional-functions  
7
Start a slide show  
2-Insert the disc with pictures into the disc com-  
partment.  
Select »Start Slide Show« by using »A« or  
»S« and press »ENTER« to confirm. All  
pictures will be displayed.  
3 Press » « to close the disc compartment.  
– Display: »CLOSE«.  
7
Settings  
Select slide show effects and slide show de-  
lay.  
4-Select »Media« by using »A« or »S« and  
press »ENTER« to confirm.  
7
Browse Music  
5-Confirm »Optical Disc« with »ENTER«.  
Opens the music playing menu where you  
can select music files to play while you view  
pictures.  
6-Confirm »Pictures« with »ENTER«.  
– The picture summary opens.  
7
Main Menu  
Picture  
Optical Disc  
Switches to the main menu.  
Repeat  
24 item(s)  
Wallpaper 1080 (7).jpg  
Wallpaper 1080 (8).jpg  
Wallpaper 1080 (9).jpg  
7
During playback, press »REPEAT« to select  
Settings  
Main Menu  
the repeat mode:  
Start Slide Show  
Browse Music  
Now Playing  
Wallpaper 1080 (1).jpg  
Wallpaper 1080 (10).jpg  
Wallpaper 1080 (11).jpg  
– »Repeat All«,  
– »Repeat Off«.  
Wallpaper 1080 (12).jpg  
Wallpaper 1080 (13).jpg  
Wallpaper 1080 (14).jpg  
25-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING-AUDIO/VIDEO-FILES---------------------------------------------------------  
Playback  
Playing-audio-CDs  
1-Chose the required folder from the summary  
by using »A« or »S«, »a« and press »EN-  
TER« to confirm.  
Preparation  
1 Press » « to open the disc compartment.  
– Display: »OPEN«.  
2-Press » « to start playback.  
2-Insert the disc with audio files into the disc  
– The selected folder starts playing.  
compartment.  
3 Press » « to close the disc compartment.  
– Display: »CLOSE«.  
File 1/5 song1.mp3  
Title: Cool Track  
Artist: Ricardo Funiccio  
Album: Dead Dux  
0:02:00  
Play  
0:30:00  
Off  
Off  
4-Select »Media« by using »A« or »S« and  
press »ENTER« to confirm.  
5-Confirm »Optical Disc« with »ENTER«.  
3-Press »7« to stop playback.  
6-Confirm »Music« with »ENTER«.  
– The folder summary opens.  
Additional-playback-functions  
7
Press » « to pause playback.  
Press » « again to resume playback.  
7
7
Select the playback speed during playback  
by pressing »3« or »4«.  
During playback, select the next title you  
want with »  
with » «.  
« or select the previous title  
7
During playback, press »REPEAT« repeatedly  
to select a repeat/random mode:  
– »Repeat All«,  
– »Random On«,  
– »Repeat File«,  
– »Repeat Off«.  
7
7
Confirm »Previous folder« by pressing  
»ENTER«, to select the summary.  
During playback, press »ENTER« and select  
»Main Menu«, to switch to the main menu.  
26- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NetFusion-MODE-----------------------------------------------------------------------------------------------------------  
About-NetFusion  
Setting-NetFusion-function  
1-Switch on the Blu-ray player with »8«.  
7
The device supports NetFusion. This allows  
you to combine media streaming with con-  
trolling a connected media receiver while  
streaming content to it from another PC on  
a network.  
2 Press »SETUP« on the remote control to open  
the main menu.  
3 In the main menu select »Settings« by using  
»A« or »S« and press »ENTER« to con-  
firm.  
7
You can easily access the Video, music and  
image files on the server through the NetFu-  
sion menu of your player.  
4 Select »System« by using »A« or »S« and  
press »ENTER« to confirm.  
– The System menu opens.  
7
You can share your video, music and image  
files through devices such as PC, mobile  
phone or NAS (Network Attached Storage)  
that function as DMS (Digital Media Server)  
compatible with NetFusion.  
Audio  
System  
Language  
Optical Disc Auto Play  
NetFusion  
Enable  
On  
Parental  
System  
Screen Saver Duration  
Auto Power Down  
Digilink  
5 Minutes  
20 Minutes  
Off  
Settings  
7
The player can also operate with DMS soft-  
Update Via Network  
Restore factory defaults  
System Information  
ware that can be installed on a computer  
but, it is not guaranteed that it will run in full  
compatibility with software without a DMS  
certificate.  
Network  
BD-Live  
Display  
5 Select »NetFusion« by using »A« or »S«  
and press »ENTER« to activate.  
Select »On« by using »A« or »S« and  
7
If you use a computer running with Windows  
operating system, it can be configured as  
Windows Media Player (Version 11) Digital  
Media server.  
press »ENTER« to confirm.  
Settings to be made depend on the relevant  
software.  
In order not to encounter any problems with  
media sharing, check the firewall settings of  
your modem and computer.  
6 Press »RETURN« and select »Network« by us-  
ing »A« or »S«.  
Check the network connection.  
7 Press »RETURN« to return to the main menu.  
27-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NetFusion-MODE-----------------------------------------------------------------------------------------------------------  
Preparation  
Using-NetFusion-function  
1-Switch on the Blu-ray player with »8«.  
1-Select »Videos«, »Music« or »Pictures« by us-  
ing »A« or »S« and press »ENTER« to  
confirm.  
2 Press »SETUP« on the remote control to open  
the main menu.  
2-Depending on the configuration of the shared  
media choose the file/title from the selected  
option by using »A« or »S« and press  
»ENTER« to confirm.  
3 In the main menu select »NetFusion« by using  
»A« or »S« and press »ENTER« to con-  
firm.  
– Display: »  
Discovering«.  
3-Press » « to start playback.  
– The selected folder/file starts playing.  
4 Select the shared media from the menu by  
using »A« or »S« and press »ENTER« to  
confirm.  
File 1/5 song1.mp3  
Title: Cool Track  
Artist: Ricardo Funiccio  
Album: Dead Dux  
Videos  
0:02:00  
Play  
0:30:00  
Off  
Off  
Music  
Nort(A00045747)  
Discovering  
NetFusion  
NetFusion  
NetFusion  
4-To stop playback, press »7«.  
Picture  
Note  
7
File and folder structure of the DMS device  
in menu may vary depending on the Digital  
Media Server software in use.  
7
7
Subtitles are not supported on video files  
that are played through the DMS device.  
Video files played through DMS device  
support following formats that have ob-  
tained NetFusion certificate: »MPEG_PS_  
PAL«, »MPEG_TS_SD_EU«, »MPEG_TS_  
SD_ EU_T« and »MPEG_TS_SD_EU_ISO«.  
7
7
Audio files played through DMS device sup-  
port following formats that have obtained  
NetFusion certificate: »LPCM« and »MP3«.  
Image files played through DMS device sup-  
port following formats that have obtained  
NetFusion certificate: »JPEG_SM«.  
Additional-playback-functions  
7
See chapter "Playing Audio/Video files",  
depending on the file in use.  
28- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL-SETTINGS------------------------------------------------------------------------------------------------------  
– Bitstream HD: Original bitstream from disc is  
passed over HDMI and SPDIF using highest  
1 Press »SETUP« on the remote control to open  
quality possible. HDMI has higher quality  
Audio-settings  
the main menu.  
capabilities with advanced audio codecs  
2 In the main menu select »Settings« by using  
»A« or »S« and press »ENTER« to con-  
firm.  
like TrueHD and DTS-HD. BD audio limited  
to soundtrack for main movie (i.e. no PiP au-  
dio, no effects audio).  
3 Select »Audio« by using »A« or »S« and  
press »ENTER« to confirm.  
– The audio menu opens.  
– Bitstream Legacy: Original bitstream from  
disc is passed over HDMI and SPDIF using  
legacy audio formats. BD audio limited to  
soundtrack for main movie (i.e. no PiP au-  
dio, no effects audio).  
Network  
Audio  
BD-Live  
PCM Down sampling  
Digital Output  
48 kHz  
PCM  
Off  
– Bitstream Mixed: BD audio streams are  
mixed and encoded into a single bitstream.  
Primarily intended for customers with SPDIF  
5.1CH receivers who want to enjoy mixed  
BD audio in surround sound.  
Display  
Audio  
Dynamic Range Control  
Stereo Downmix  
Settings  
Auto  
Language  
Parental  
System  
Dynamic-Range-Control  
Is only active when a Dolby Digital signal is  
detected.  
Options:  
– Off: you can enjoy the movie with the stand-  
ard Dynamic Range.  
4 Select the required function by using »A« or  
»S« and press »ENTER« to activate.  
5 Select your required settings by using »A« or  
»S« and press »ENTER« to confirm.  
6 Press »RETURN« or »a« to close the sub-  
menu;  
or  
– On: when movie soundtracks are played at  
low volume or from smaller speakers, the sys-  
tem can apply appropriate compression to  
make low-level content more intelligible and  
prevent dramatic passages from getting too  
loud.  
– Auto: the system turns on the Dynamic range  
control for all BD movie soundtracks except  
Dolby TruHD. If you have selected a Dolby  
TruHD track on the BD disc, Auto tells the  
player to only turn on dynamic range control  
if information embedded in the Dolby TruHD  
sound track tells it to do so.  
press »SETUP« to return to the main menu.  
Existing-settings-in-the-Audio-  
menu  
PCM-Downsampling  
Sets the player’s digital output PCM sampling  
rate.  
Options: 48 kHz, 96 kHz, Off.  
Incorrectly setting the digital audio output’s  
PCM sampling rate may result in unpredict-  
able audio playback.  
Stereo-Downmix  
Sets »AUDIO- OUT- L/R« output to Auto,  
Stereo (LoRo) or Surround Encoded (LtRt).  
Digital-Output  
Sets the player’s digital audio output sockets.  
Options:  
– PCM: Mixed digital audio sent over HDMI  
in PCM (if supported by HDMI device) and  
SPDIF in two channel PCM format.  
29-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL-SETTINGS------------------------------------------------------------------------------------------------------  
Language-settings  
1 Press »SETUP« on the remote control to open  
the main menu.  
Existing-settings-in-the-Language-  
menu  
Note:  
7
Not all languages are available on all discs.  
Most discs only have one menu, audio or  
subtitle language available.  
2 In the main menu select »Settings« by using  
»A« or »S« and press »ENTER« to con-  
firm.  
3 Select »Language« by using »A« or »S«  
and press »ENTER« to confirm.  
– The language menu opens.  
OSD-Language  
Sets the language of the player’s screen menu.  
You can choose between several languages.  
BD-Live  
Language  
Menu-Language  
Sets the preferred menu language as the de-  
fault language for the disc.  
Display  
OSD  
English  
Auto  
Audio  
Menu  
Audio  
Subtitle  
Auto  
Settings  
Language  
None  
Audio-Language  
Sets the preferred audio language as the de-  
fault language for the disc.  
Parental  
System  
Network  
Some discs do not allow the user to select the  
audio language from the player setup menus.  
The audio language can only be selected from  
the BD/DVD disc setup menu (the menu that  
appears after the disc has been inserted).  
4 Select the required function by using »A« or  
»S« and press »ENTER« to activate.  
5 Select your required settings by using »A« or  
»S« and press »ENTER« to confirm.  
Subtitle-Language  
Sets the preferred subtitle language as the de-  
fault language for the disc.  
6 Press »RETURN« or »a« to close the sub-  
menu;  
or  
Some discs do to not allow the user to select  
the subtitle language from the player setup  
menus. The subtitle language can only be se-  
lected from the BD/DVD disc setup menu (the  
menu that appears after the disc has been in-  
serted).  
press »SETUP« to return to the main menu.  
30- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL-SETTINGS------------------------------------------------------------------------------------------------------  
Parental-control-  
1 Press »SETUP« on the remote control to open  
the main menu.  
Existing-settings-in-the-Parental-  
menu  
Parental-Control-(On/Off)  
2 In the main menu select »Settings« by using  
»A« or »S« and press »ENTER« to con-  
firm.  
The parental control function works in conjunc-  
tion with the different censorship classes as-  
signed to discs. These classes help to control  
the types of disc that the family watches. There  
are up to 8 censorship classes for discs.  
3 Select »Parental« by using »A« or »S« and  
press »ENTER« to confirm.  
– The Parental Password menu opens.  
Parental-Level  
Display  
Parental Control  
Off  
Sets different censorship classes assigned to  
discs such as:  
– 1[Kid Safe]: Suitable for all children.  
– 2[G]: General audiences.  
Audio  
Please enter new parental control password  
La
Parental  
P
Ok  
Cancel  
– 3[PG]: Parental guidance suggested.  
– 4[PG-13]: Not suitable for anyone under 13.  
– 5[PG-R]: Parental guidance recommended.  
– 6[R]: Not suitable for anyone under 17 un-  
less supervised by a parent or adult guard-  
ian.  
Sy
Network  
Parental Password  
BD-Live  
4 Enter your password with the numeric button  
»0« »0« »0« »0«, select »Ok« with »S« and  
press »ENTER« to confirm.  
– 7[NC-17]: Not suitable for anyone under 17.  
– 8[Adult]: All discs can be played.  
Display  
Parental  
Parental-Password  
Audio  
Parental Control  
Parental Level  
On  
Language  
Parental  
System  
Sets the password as a 4 digit number.  
Enter your new password with the numeric but-  
tons »1...0«, select »Ok« with »S« and press  
»ENTER« to confirm.  
8 (Adult)  
Parental Password  
Settings  
Network  
BD-Live  
Please do not forget the password you choose.  
5 Select the required function by using »A« or  
»S« and press »ENTER« to activate.  
6 Select your required settings by using »A« or  
»S« and press »ENTER« to confirm.  
7 Press »RETURN« or »a« to close the sub-  
menu;  
or  
press »SETUP« to return to the main menu.  
31-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL-SETTINGS------------------------------------------------------------------------------------------------------  
NetFusion  
System-settings  
Activates the access to the Digital Media  
Server.  
1 Press »SETUP« on the remote control to open  
the main menu.  
2 In the main menu select »Settings« by using  
»A« or »S« and press »ENTER« to con-  
firm.  
Screen-Saver-Duration  
Sets the time of entering screen saver status  
(Black screen). If the screen saver duration is  
off, there will not be black screen.  
3 Select »System« by using »A« or »S« and  
press »ENTER« to confirm.  
– The System menu opens.  
Auto-Power-Down  
Audio  
Automatically turns the player off if no settings  
are changed after a selected period of time  
(5, 10, 20 or 30 minutes).  
System  
Language  
Optical Disc Auto Play  
NetFusion  
Enable  
On  
Parental  
System  
Screen Saver Duration  
Auto Power Down  
Digilink  
5 Minutes  
20 Minutes  
Off  
Settings  
Digilink-(CEC)  
Update Via Network  
Restore factory defaults  
System Information  
Network  
BD-Live  
Can be used to allow the LED/LCD TV remote  
control to control certain functions of the Blu-  
Ray player and for the Blu-Ray player to con-  
trol certain functions of the LED/LCD TV.  
Not all LED/LCD TVs are compatible with your  
player.  
Display  
5 Select the required function by using »A« or  
»S« and press »ENTER« to activate.  
6 Select your required settings by using »A« or  
»S« and press »ENTER« to confirm.  
– On: allows mutual control of devices  
through HDMI.  
– Off: does not allow CEC control.  
7 Press »RETURN« or »a« to close the sub-  
menu;  
or  
Update-Via-Network  
Downloads and installs product updates for  
your player.  
press »SETUP« to return to the main menu.  
If there is a new software available, the device  
updates itself if it is connected to network.  
Existing-settings-in-the-System-  
menu  
Restore-Factory-Defaults  
Resets your player to the default factory set-  
tings.  
Optical-Disc-AutoPlay  
There are two options:  
– Disable: Once you have inserted the disc,  
press » « or »ENTER« to start the play-  
back.  
– Enable: Once you have inserted the disc,  
the playback starts automatically or the  
discmenu is diplayed automatically.  
After presing »ENTER« a warning message  
appears. Select »Ok« to confirm or »Cancel«  
to cancel the function and press »ENTER« to  
close the menu.  
Restore function does not reset the "Parental  
Control Password".  
System-Information  
Indicates information about the player.  
32- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION-------------------------------------------------------------------------------------------------------------------  
Help protect the environment by recycling used  
Licence-conditions  
products.  
Manufactured under license  
from Dolby Laboratories.  
General-information-on-laser-devices  
Dolby and the double-D  
This device is a  
symbol are trademarks of  
LASER RADIATION  
CLASS 2 LASER  
DO NOT STARE INTO BEAM  
Dolby Laboratories.  
CLASS 2 LASER PRODUCT  
PRODUCT. This  
Pmax=0,093mW (λ=405nm)  
IEC 60825-1:2007  
Manufactured under license  
under U.S. Patent Nos:  
5,956,674; 5,974,380;  
6,487,535 & other U.S.  
means that the de-  
vice emits laser  
radiation which is safe for momentary expo-  
sures, but can be hazardous for deliberate star-  
ing into the beam.  
and worldwide patents issued & pending. DTS,  
the Symbol, & DTS and the Symbol together are  
registered trademarks and the & DTS Digital Sur-  
round and the DTS logos are trademarks of DTS,  
Inc. Product includes software. DTS, Inc. All  
Rights Reserved.  
Caution:  
7
Do not stare into beam.  
7
If operating devices or  
methods other than those  
specified here are em-  
ployed, it may lead to  
This item incorporates copy-  
right protection technology  
that is protected by U.S. pat-  
dangerous exposure to emissions.  
ents and other intellectual  
7
This device emits laser radiation. Because of  
property rights. Use of this  
the danger of eye injuries, the unit may only be  
opened or serviced by trained personnel.  
copyright protection technology must be author-  
ized by Rovi Corporation, and is intended for  
home and other limited viewing uses only unless  
otherwise authorized by Rovi Corporation. Re-  
verse engineering or disassembly is prohibited.  
7
If settings other than those stated here are used  
or other procedures are carried out, this may  
lead to dangerous exposure to radiation.  
You can recognise a 3D Blu-  
ray disc by the logo on the  
label. The same copyright  
protection for Blu-ray Disc  
logo which is described  
Cleaning-the-device-  
Pull out the power cord from the wall socket.  
Clean the device by using a soft cloth slightly  
moistened with a mild detergent solution. Do not  
use a solution containing alcohol, spirits, ammo-  
nia or abrasives.  
above is also effective for Blu-ray 3D Discs.  
Environmental-note  
Cleaning-the-disc  
This product has been man-  
ufactured with high quality  
parts and materials which  
can be reused and are suit-  
able for recycling.  
If the device is unable to  
scan CDs perfectly, use  
a standard, commer-  
cially available cleaning  
CD to clean the laser  
optics.  
Therefore, do not dispose the product with nor-  
mal domestic waste at the end of its service life.  
Take it to a collection point for the recycling of  
electrical and electronic equipment. This is indi-  
cated by this symbol on the product, in the user  
manual and on the packaging.  
Other cleaning methods  
may damage the laser optics.  
Use a lint-free cloth for cleaning the CD and al-  
ways wipe it from the inside out in a straight line.  
Do not use cleaning agents for conventional vinyl  
discs, nor any solvents or abrasive cleaners.  
Please consult your local authorities to learn the  
nearest collection point.  
33-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION-------------------------------------------------------------------------------------------------------------------  
Technical-data  
System  
This device is noise-sup-  
pressed according to the  
applicable EU directives.  
Power-supply  
Operating voltage:  
Mains frequency:  
110 - 240 V  
50/60 Hz  
17 W  
~
This product fulfils the European directives  
1999/5/EC and 2009/125/EC.  
Max. power consumption:  
Power consumption in standby: ≤ 1 W  
To obtain a copy of the Declaration of Conform-  
ity (Doc), please submit your request by using  
the contact information at  
Playback-standard  
PAL, 50 Hz, 625 lines  
NTSC, 60 Hz, 525 lines  
www.grundig.com/download/doc.  
The type plate is located on the back of the de-  
vice.  
Disc-types  
This appliance can be operated in the following  
European countries.  
3D BD, 2D BD, DVD- video Disc (DVD-ROM),  
DVD-RW, DVD+RW, DVD-R, DVD+R, WMA,  
JPEG, MPEG4, CD-R, CD-RW  
AT BE BG CH CY CZ DE DK  
EE ES FI  
IS IT LI  
NO PL PT RO SE SI SK TR  
FR GB GR HU IE  
LT LU LV MT NL  
USB-  
USB 2.0 compatible FAT 32/16  
Laser  
Semiconductor laser  
This appliance can be operated in countries out-  
side Europe.  
Wavelength for BD 400 - 410 nm  
Wavelength for DVD 650 - 663 nm  
For-customers-in-France;  
Outdoor use limited to 10 mW e.i.r.p. within the  
band 2454-2483,5 MHz. Military Radiolocation  
use. Refarming of the 2.4 GHz has been ongoing  
in recent years to allow current relaxed regula-  
tion. Full implementation planned 2012.  
Wavelength for CD 770 - 800 nm  
Audio-format  
Digital MPEG4, Dolby Digital, Dolby Digital Plus,  
Dolby TrueHD, DTS Advance Digital out  
WLAN-  
Audio  
BD/DVD 192 kHz  
Network standard IEEE 802.11b IEEE 802.11g  
Transfer rate 802.11b:11, 5.5, 2,1 Mbps  
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps  
Signal to Noise ratio: 90 dB  
Operating channels: 13 (based on the router)  
Dimensions-and-weight  
Safety: Hardware-WEP-Engine (64/128 Bit);  
WEP-Weak- Key-Avoidance (WEPplus), TKIP,  
Hardware-AES-Engine with support for CCM and  
OCB, 802.1x, SSN.  
Device dimensions:  
W x H x D :  
430 x 44 x 230 mm  
Device weight: 2.1 kg  
Technical and design modifications reserved.  
34- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION-------------------------------------------------------------------------------------------------------------------  
Troubleshooting  
If the following measures do not resolve the  
problem satisfactorily, please contact your  
specialist dealer.  
Not every picture or sound problem is caused  
by a defect in your device. Cables that have  
accidentally been disconnected, damaged discs  
and flat batteries for the remote control will  
impair functioning.  
To-reset-this-unit  
To return all settings other  
than some settings to the  
factory preset.  
Select Yes in Restore Default Settings in the Setup menu. This returns  
all values in the Setup menu and the on-screen menu, except for  
parental setting to the default settings.  
Power  
Insert the AC power supply cord securely into a known active AC  
outlet.  
No power.  
This is a power saving feature.  
The player switches to  
standby mode.  
The Auto Power Down function is activated. Press »8« on the player  
to turn the device on.  
Operation  
The batteries are depleted. Replace them with new ones.  
You are not pointing the remote control at the main unit’s remote con-  
trol signal sensor during operation.  
Colored glass may obstruct the signal reception/transmission.  
Don’t place the signal sensor in direct sunlight or in areas that may be  
subject to sunlight exposure.  
The remote control doesn’t  
work properly.  
Select the correct playback source (BD-ROM or Media).  
Some operations may be prohibited by the disc.  
Reset the device as follows:  
1. Press »8« on the device to switch the device to standby. If the de-  
vice doesn’t switch to standby, alternatively, disconnect the AC power  
supply cord, wait one minute, then reconnect it.  
The player is on but cannot  
be operated.  
2. Press »8« on the device to switch it on. If the device still cannot be  
operated, consult the dealer.  
Condensation has formed: Wait 1 to 2 hours for it to evaporate.  
Play fails to start even when Insert the disc correctly with the label facing up.  
(PLAY) is pressed. Play  
starts but then stops imme-  
diately.  
Startup is slow. When the  
player is turned on, audio Immediately after a power failure or the AC power supply cord is  
The disc is dirty.  
You tried to play a blank disc or unplayable disc on this device.  
Startup takes time in the following situations.  
and video output takes a  
long time.  
connected.  
When the unit is connected with an HDMI cable.  
35-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION-------------------------------------------------------------------------------------------------------------------  
The disc is dirty or any scratched.  
The format of the disc is not supported.  
Auto open while reading  
the disc.  
Try to reset the device. To do so, press "8", wait for 5 seconds and  
then press this button again.  
The disc is dirty or scratched.  
Check the TV system setting, switch PAL/NTSC TV system in setup menu.  
Audio and video momen-  
tarily pause while reading  
disc.  
Try to reset the device. To do so, press "8", wait for 5 seconds and  
then press this button again.  
The disc is dirty or any scratch.  
The player is on with start  
logo and menu but has no  
image from the disc.  
Try to reset the device. To do so, press "8", wait for 5 seconds and  
then press this button again.  
Reset the device, when you see “ loading ” on the screen, press » « to  
take out the disc, clean the disc and try it again.  
If the device freezes again, the disc may have some contents the de-  
vice can't support. Please stop playing the disc in this device.  
The unit freezes while rea-  
ding CD-R/DVD-R disc  
This occurs between playlist chapters or scenes ([AVCHD]).  
When playing a title recorded on both layers, the unit automatically  
switches between layers and plays the title in the same way as a  
normal program. However, video and audio may momentarily cut out  
when the unit is switching layers.  
Audio and video momenta-  
rily pause.  
Ensure the disc is for the correct BD-Video region code or DVD-Video  
region number, and is not defective.  
You have set a parental level to limit BD-Video or DVD-Video play.  
Change this setting.  
BD-Video or DVD-Video is  
not played.  
Some BD-Video can only be output with HDMI.  
Picture-in-picture is not pla-  
yed with BD-Video.  
Confirm whether the disc supports picture-in-picture.  
Subtitles are not recorded on the disc.  
Turn the subtitles on. Set “Subtitle” on the on-screen menu to “ On ”.  
No subtitles.  
Angles can only be changed during scenes where different angles are  
recorded.  
Angle cannot be changed.  
Memorized positions are canceled when  
– pressing »7« several times.  
– opening the disc tray.  
The resume play function  
does not work.  
The resume play function may not work depending on the disc.  
36- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION-------------------------------------------------------------------------------------------------------------------  
TV-screen-and-video  
Make sure that the LED/LCD-TV is connected to the VIDEO OUT so-  
cket or HDMI OUT socket on this device.  
Make sure that the LED/LCD-TVs input setting (e.g., VIDEO 1) is correct.  
The device is likely to enter screen saver status.  
The images from this player  
do not appear on the tele-  
vision.  
Try to reset the device. To do so, press "8", wait for 5 seconds and  
then press this button again.  
Picture is distorted.  
High definition video cannot be output through the VIDEO OUT.  
Confirm that the HDMI Resolution in the Setup menu is set properly.  
Video is not output in high-  
definition.  
The 4:3 aspect ratio picture Use the LED/LCD-TV to change the aspect. Refer to your LED/LCD-TVs  
expands left and right.  
operating instructions.  
Insert a USB memory stick with a free space. Select BD-Live Storage  
from the BD-Live Menulist. Then restart the device.  
Please check the internet is available or not. Some of the disc need the  
support of internet.  
Please check the connection cable to the router. If it is loose, please  
insert again.  
When it is playing BD-LIVE  
disc, Video output is a  
black screen.  
Internet  
– WLAN network is deactivated, switch on the WLAN network.  
– SSID is suppressed on the router; display SSID on the router.  
– Distance to router is too large; reduce distance to router.  
– MAC adress of the device is not enabled on the router;  
enable MAC address on the router.  
Desired WLAN network not  
found.  
Connection to router not  
established.  
– Data transfer from the router is encrypted; Enter the network key  
(WEP orWPA) on the device.  
If this does not help, check the entire router configuration.  
Sound  
Check the connections and the “Digital Output” settings. Check the  
input mode on the amplifier/receiver if you have connected one.  
Press »AUDIO« to select the audio signal.  
No sound. Low volume.  
Distorted sound.  
The sound effects (Re-master, V. Surround, etc.) will not work when the  
bitstream signal is output from the HDMI OUT socket or the  
»COAXIAL« socket.  
When “BD-Video Secondary Audio” is set to “Off”, Dolby Digital  
Plus, and Dolby TrueHD are output from the »COAXIAL« terminal as  
Dolby Digital or DTS Digital Surround bitstream.  
Cannot hear the desired  
audio type.  
Try to reset the device. To do so, press "8", wait for 5 seconds and  
then press this button again.  
There are discs for which audio cannot be changed because of how  
the disc was created.  
When connecting an amplifier/receiver using a coaxial cable or an  
HDMI cable, you cannot switch the audio if “Digital Output” is set to  
“Bitstream”. Set “Digital Output” to “PCM” or connect using audio  
cables.  
Cannot switch dubbed lan-  
guage or the audio format .  
37-  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION-------------------------------------------------------------------------------------------------------------------  
HDMI-connections  
The 4:3 aspect ratio picture  
expands left and right.  
Screen size is wrong.  
Change “TV Aspect ” type to “16:9 Wide”.  
BD-Live-and-USB-connections  
Check if the disc is a legal copy.  
Confirm whether the network connection is ok.  
Cannot connect network  
Check if the capacity of Storage is full. if it is full, please clear storage  
in the BD-Live menu and reset the device.  
Confirm whether the network connection is ok.  
Change USB device and then test it.  
After network connection,  
cannot download file  
Succeed in downloading  
file, but playback pause.  
Pause playing the file in the  
USB device  
Confirm the device is USB 2.0. if it is USB 1.1, playing may pause.  
Change USB device and then test it.  
38- ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
www.grundig.com  
72011 411 4600 12/01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grundig Car Speaker GSB 120 User Manual
Haier Video Games Y 716 User Manual
Haier Washer XPB80 50 User Manual
Harbor Freight Tools Water Pump 69297 User Manual
Healthrider Treadmill H500i User Manual
Honeywell Car Stereo System GSM ANT User Manual
Honeywell Thermostat Cm51 User Manual
HP Hewlett Packard Home Theater System 2000495 User Manual
Hyundai Car Stereo System H CMD4012 User Manual
iHome Satellite Radio ZN14 User Manual