Blu-ray Player
GBP 6000 2D
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SET-UP-AND-SAFETY------------------------------------------------------------------------------------------------
7
Please note the following instructions when set-
ting up the system:
Always keep the disc compartment closed to
prevent dust from collecting on the laser optics.
7
7
The device is designed for the playback of
Do not use cleaning agents as they may dam-
age the housing. Clean the device with a
clean and dry cloth.
video and audio signals from compact discs,
USB and similar data devices. Any other use is
expressly prohibited.
Notes:
7
7
If you want to set up the device on wall shelves
Do not connect any other equipment while
or in cupboards, please ensure that it is ad-
equately ventilated. There must be at least 10
cm of space at the side, above and behind the
device.
the device is switched on. Switch off the oth-
er devices as well before connecting them.
7
Only plug the device into the mains socket
after you have connected the external de-
vices. Make sure the power plug is freely
accessible.
7
Do not cover the device with newspapers,
table cloths, curtains, etc.
7
When setting up the device, remember that
furniture is often coated with various types of
varnish and plastic, which often contain chemi-
cal additives. These additives may cause cor-
rosion to the feet of the unit. This may leave
stains on the surface of the furniture which can
be difficult or impossible to remove.
7
If the device is exposed to sudden changes in
temperature, for example when taken from the
cold into a warm room, wait at least two hours
before using it.
7
The device is designed for use indoors. If you
use it outdoors, make sure it is protected from
moisture such as dripping or splashing water.
7
Use the device only in a moderate climate.
7
Do not place the device close to heating units
or in direct sunlight, as this will impair cooling.
7
Do not place any vessels containing liquids,
such as vases, on the device. Do not insert any
foreign objects in the disc compartment.
7
Do not place any objects such as burning can-
dles on the device.
7
Do not open the device casing under any cir-
cumstances. Warranty claims are excluded for
damage resulting from improper handling.
7
Thunderstorms are a danger to all electrical
devices. Even if the device is switched off, it
can be damaged by a lightning strike to the
mains. Always disconnect the mains plug dur-
ing a storm.
3-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
GBP-6000-2D--------------------------------------------------------------------------------------------------------------------------
7
The device supports NetFusion. This allows
Packing-contents
you to combine media streaming with control-
ling a connected media receiver while stream-
ing content to it from another PC on a network.
Blu-ray disc player
Remote control
2 batteries
(Micro, R03/UM 4/AAA, 2 x 1,5 V)
User manual
7
7
7
The MP3 and WMA music data formats can
also be played back via USB input or Audio
CDs.
Audio/Video cable
It is possible to display digital photograph
files that have been burned onto a data disc,
DVD+/-R, DVD+/-R/(W) or a Blu-ray Disc.
GBP 6000 2D
BD Player
The DIGI LINK
Your player is equipped with the DIGI
LINK function. This function uses the
CEC (Consumer Electronics Control)
protocol.
CEC allows external devices which are con-
nected to the »HDMI« sockets by an HDMI
cable (e.g. Blu-ray Disc player and LCD/LED-TV)
to be operated with a remote control.
Prerequisite is that the devices connected sup-
port CEC. Read the user manual for the LCD/
LED-TV to find out how to activate the corre-
sponding function.
Audio/Video cable
Two batteries
User manual
Remote Control
Special-features
Grundig Blu-ray Disc player provides high def-
inition video playback at up to 1080 p resolu-
tion for an amazing viewing experience.
7
7
Upconversion of standard definition DVDs for
enhanced picture quality at up to 1080 p over
an HDMI connection.
7
7
Rich multi channel surround sound.
Easy and simple HDTV connection using a sin-
gle HDMI cable.
7
7
Digital and analogue outputs for connecting
your home theater system or amplifier.
PIP functionality that lets you display primary
and secondary video at the same time (if
available on the Blu-ray Disc).
7
7
Pop-up menu display without interrupting play-
back (if available on the Blu-ray Disc).
HDMI 1080 p /50 fps output (Blu-ray Disc
only) that provides smooth playback of video
with a frame rate of 50 frames per second (TV
must be connected with an HDMI cable and
be compatible with 1080 p 50 frame).
7
Access to BD-Live functions, with internet con-
nection and an additional memory (if avail-
able on the Blu-ray Disc).
4- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
GBP-6000-2D--------------------------------------------------------------------------------------------------------------------------
Notes:
Disc-type
Logo
7
Writable DVD discs (DVD-RW, DVD-R) must
be finalized; only VR-mode is allowed. Play-
back may not work for some types of discs,
or when specific operations, such as angle
change and aspect ratio adjustment, are be-
ing performed. Information about the discs
is written in detail on the box. Please refer to
this if necessary.
Blu-ray Disc
DVD-video Disc
(DVD-ROM)
DVD-RW
DVD+RW
DVD-R
7
Do not allow the disc to become dirty or
scratched. Fingerprints, dirt, dust, scratches
or deposits of cigarette smoke on the record-
ing surface may make it impossible to use
the disc for playback.
7
7
CD-R/-RW, DVD-RW/-R recorded with UDF
or ISO9660 format can be played back.
DVD+R
Video-CD(VCD)
WMA
Windows Media Audio (WMA) files must
be written to the disc with a .wma file exten-
sion in order to be recognized and played
back properly.
7
JPEG picture files must be written to the disk
with an .jpeg or .jpg file extension in order
to be recognized and played back prop-
erly.
JPEG
MPEG4
CD-R
CD-RW
MP3
5-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW-----------------------------------------------------------------------------------------------------------------------------------
The-Blu-ray-player-controls
The-front-of-the-device-
!
9
e
.
GBP 6000 2D
Disc-compartment-
IR-sensor
Display
Power-indicator
USB
Disc-com-
p- artment
- -Compartment for BDs/ CDs.
9
Switches the device on from standby
mode and off again.
Infra-red sensor for remote
control signals.
-
-
Plays next title, chapter, track or file if
exists.
•
Power--
indicator
Display of the device.
Plays previous title, chapter, track or
file if exists.
Lights up when the device is at
standby mode.
Starts and pauses playback.
-
USB socket for connecting
MP3 player, a USB memory
stick or a card-reading device.
.
Opens or closes the disc compart-
ment.
The-back-of-the-device
GBP 6000 2D
BLU-RAY DISC PLAYER
AC:110-240
POWER:17
V
50/60 Hz
~
W
SN
GLR 5800
110-240-V-50/60-Hz
Ethernet HDMI-OUT
VIDEO-OUT
COAXIAL
AUDIO-OUT-L/R
110---240-V-
50/60-Hz
Power cord.
VIDEO-OUT
COAXIAL
Video output socket for
connecting a LED/LCD-
TV or AV receiver with an
RCA socket.
ETHERNET
Socket for connecting the
internet.
Audio output socket (coax-
ial) for connecting a dig-
ital multi-channel audio/
video amplifier.
HDMI-OUT
Video/audio output socket
(digital signal) for connect-
ing LED/LCD-TV.
Audio output sockets (left/
right analogue channel)
for connecting an audio
system.
AUDIO- OUT-
L/R
6- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW-----------------------------------------------------------------------------------------------------------------------------------
9
Switches the device on from
standby mode and off again.
The-remote-control-
Opens or closes the disc com-
partment.
1---0-
-Number buttons for various data.
SEARCH-
-Press repeatedly to switch be-
tween search modes: title, chap-
ter and time. Then use number
buttons and »ENTER« button to
select the point you want to play.
RETURN-
-Press to return to the previous
menu during the settings or the
folder or menus when playing a
WMA/MP3/JPEG disc.
OSD
-Shows current playback status
and time information.
SUBTITLE
-Press to enable/disable subtitles
during BD/DVD playback. If the
disk has more than one subtitle
language, use the cursor buttons
to select the subtitle languages
and press »ENTER« to confirm.
A-B-
-During playback, press once to
store a “start point” for repeating
playback. Press again to select
an “end point”, then the play-
back repeats from the beginning
to the end (not available on all
disks). The third press cancels
this function.
REPEAT-
-Cycles through the possible re-
peat modes based on content
played.
3 -
R- ewinds the playback to the be-
ginning.
4-
F- ast forwards the playback to
the end.
-
-
Plays previous title, chapter, track
or file if exists.
Plays next title, chapter, track or
file if exists.
7-
Stops the playback.
-
-Starts or pauses playback.
7-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW-----------------------------------------------------------------------------------------------------------------------------------
!8-
-Frame-by-frame playback.
DISC-MENU- -Immediately stops playback and
brings up the main or 'top' menu
of the BD or DVD disc. (Not
available on all discs). In the
main menu, you can typically
choose subtitle language, audio
track, or different scene etc.
--On BD discs: to bring up the
main movie menu (not available
on all discs).
POPUP-MENU-
TITLE-MENU
aASs -Cursor buttons, select various
functions in the menus.
ENTER-
SETUP
ANGLE
-Confirms selected functions in
the menus.
-Opens the settings menu of the
device.
-Selects various camera angles
for certain scenes or passages
on the BD and DVD during play-
back (not available on all discs).
-The red, green, yellow and blue
buttons start disc-specific fea-
tures on some BD discs (if avail-
able on the Blu-ray Disc).
COLOR-
BUTTONS
RESOLUTION- At stop mode, sets the video out-
put resolution (your TV should
support setting the resolution.
Please refer to your TV's user
manual).
PIP-
Opens the PIP function.
--During PIP playback, press to set
the audio of the second video.
SECONDARY-
AUDIO
MUTE-
Mutes the sound.
ZOOM-
Zooms in on scenes during play-
back (only DVD).
–-VOLUME-+- Sets the volume.
AUDIO- During playback, press to set the
audio channel.
8- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION-AND-PREPARATION----------------------------------------
Notes:
Connecting-the-LED/LCD-TV-using-
7
Do not connect any other equipment while
RCA-cables
the device is switched on.
Switch off the other equipment as well be-
fore connecting it.
Television
BD Player
7
Only plug the device into the mains socket
after you have connected the external de-
vices.
Connecting-the-LED/LCD-TV-using-
an-HDMI-cable-
To video input (yellow)
To audio inputs (red,white)
Television
BD Player
1 Connect a standard cinch cable into the
»VIDEO-OUT« socket on the back of the
device and the corresponding socket (VIDEO
IN) on the LED/LCD TV.
2 Connect standard cinch cables into the
»AUDIO-OUT-L/R« sockets on the back of
the device and the appropriate sockets
(AUDIO IN) on the LED/LCD TV.
1 Connect an HDMI cable (not supplied) into
the »HDMI« socket on the back of the device
and the corresponding socket (HDMI) on the
LED/LCD TV.
Connecting-a-digital-audio--
system-with-a-coaxial-cable
Television
BD Player
To Video input
Amplifier
To Coaxial-
digital audio
input
Coaxial cable
1 Connect a coaxial digital cable into the
digital output »COAXIAL« on the back of the
device and into the corresponding socket of
the digital amplifier.
9-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION-AND-PREPARATION----------------------------------------
Connecting-an-MP3-player-or-a-
USB-memory-stick
Connecting- to- the- internet- with-
ethernet-cable
Splitter
Modem Router
GBP 6000 2D
Telephone socket
BD Player
1 Connect the Ethernet socket of the modem/
router to the »ETHERNET« socket of the de-
vice using a standard network cable (Twisted
pair, RJ45 plug).
Note:
7
The device must be switched off while the
USB connection is being made. If it is not
switched off, data can be lost.
– The data throughput level is 10/100 Mbit.
1 Switch off the device by pressing »9«.
Connecting-to-the-mains-supply
2 Connect the USB interface of the MP3 player
to the »
« socket on the device, using a
Notes:
standard USB cable;
or
insert the USB plug of the USB memory stick in
7
Check that the mains voltage on the type
plate (on the back of the device) corre-
sponds to your local mains supply. If this is
not the case, contact your specialist dealer.
the »
« socket on the device.
Notes:
7
Before connecting the AC power cord to
the wall socket, ensure that all other con-
nections have been made.
7
To remove the MP3 player or the USB mem-
ory stick, switch off the device and pull out
the cable for the data medium.
7
The USB socket on the device does not sup-
port a connection for a USB extension cable
and is not designed for directly connecting
to a computer.
1 Plug the power cord into the wall socket.
Caution:
7
The device is connected to the mains with
the power cord. Pull out the power plug if
you want to completely disconnect the de-
vice from the mains.
7
Make sure the power plug is easily acces-
sible during operation and not hindered by
other objects.
10- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION-AND-PREPARATION----------------------------------------
Putting- batteries- in- the- remote-
control
2
1
3
1 Open the battery compartment by pressing
down on the catch and then remove the lid.
2 Observe the polarity marked on the base of
the battery compartment when inserting the
batteries (micro batteries, 2 x 1.5 V, R 03/
UM 4/AAA).
3 Close the lid of the battery compartment.
Notes:
7
Do not expose the batteries to extreme heat,
caused for example by direct sunlight, heat-
ers or fire.
7
Remove the batteries when they are flat or
when you know that the device will not be
used for a long period of time. The manufac-
turer accepts no liability for damage caused
by leaking batteries.
Environmental-note:
7
Batteries, including those which do not con-
tain heavy metal, should not be disposed
of with household waste. Always dispose
of used batteries in accordance with local
environmental regulations.
11-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL-SETUP-----------------------------------------------------------------------------------------------------------------------
Switching-on-the-Blu-ray-player
If you connect the device to the mains, it
switches to standby.
First-installation-by-using-the-
Quick-Setup
Use the »Quick Setup« function to make the ini-
tial settings.
1 Plug the power cord into the wall socket.
If you need more settings, refer to the chapter
"First installation by using the functions in the
main menu", see next page.
– The power indicator turns on.
2 Press »9«.
– The power indicator turns off.
– Display: »HELLO«.
1 Press »SETUP« to open the main menu.
2 In the main menu select »Quick Setup« by us-
ing »A« or »S« and press »ENTER« to con-
firm.
– -Display: »Would you like to do Quick Setup?
Yes - No« appears.
3 Switch on the LED/LCD-TV, select the input
setting on the LED/LCD-TV that matches the
connection method you used to connect the
Blu-ray player.
Menu-navigation-
When you switch on the device, the main menu
of the device automatically appears on the
screen.
3 Select »Yes« by using »a« or »s« and press
»ENTER« to confirm.
– -Display: »OSD Language Settings« menu
appears.
4 Select your language by using »A« or »S«
and press »ENTER« to confirm.
– -Display: »Resolution« menu appears.
Quick Setup
Settings
Media
5 Depending on the type of the TV connected to
the device, select resolution by using »A« or
»S« and press »ENTER« to confirm.
NetFusion
NetFusion
– -Display: »TV Aspect« menu appears.
6 Depending on the type of the TV connected to
the device, select TV Aspect by using »A« or
»S« and press »ENTER« to confirm.
– -Display: »Quick Setup Complete! Exit« ap-
pears.
1 Use the cursor buttons »A«, »S«, »s« or
»a« to move through the menu.
2 Confirm your selection by pressing »ENTER«.
BD-Live
Language
Display
7 Press »ENTER« to exit the Quick Setup.
OSD
English
Auto
Audio
Menu
Audio
Subtitle
Auto
Settings
Language
None
Parental
System
Network
3 Press »RETURN« to return to the main menu.
12- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL-SETUP-----------------------------------------------------------------------------------------------------------------------
First-installation-by-using-the-
System
Display
Network
functions-in-the-main-menu
HDMI Status
HDMI preferred Format
TV Type
Connected
1080P
BD-Live
Display
NTSC
Selecting-the-language-of-the-
screen-menu-
1 Press »SETUP« to open the main menu.
Settings
Resolution
HDMI Auto
16:9 Wide
Off
TV Aspect
Audio
Language
Parental
Film Mode (1080p24)
Deep Color
Auto
2 In the main menu select »Settings« by using
»A« or »S« and press »ENTER« to con-
firm.
3 Choose the setting (»PAL« or »NTSC«) by using
»A« or »S« and press »ENTER« to con-
firm.
3-Select »Language« by using »A« or »S«
and press »ENTER« to confirm.
Setting-the-HDMI-resolution
BD-Live
Language
You can select the ideal setting for the con-
nected LED/LCD-TV. The abbreviation behind
the number means: »p« = progressive, »i« = in-
terlace.
Display
OSD
English
Auto
Audio
Menu
Audio
Subtitle
Auto
Settings
Language
None
Parental
System
The function can only be selected once the LED/
LCD-TV is connected to the »HDMI« socket.
Network
1 In the »Display« menu select »Resolution« by
using »A« or »S« and press »ENTER« to
confirm.
4 Select »OSD« by using »A« or »S« and
press »ENTER« to confirm.
System
5 Select your language by using »A« or »S«
and press »ENTER« to confirm.
Please choose a new Resolution setting
Network
HDMI Audio
1080p
BD-Liv
6 Press »RETURN« to return to the »Settings«
menu.
1080i
√
Displa
720p
576p
576i
Audio
Language
Parental
Adapting-the-Blu-ray-player-to-
the-LED/LCD-TV
Setting-the-TV-system-(TV-norm)
Select »PAL« for LED/LCD-TV with the PAL system
or »NTSC« for those with the NTSC system.
2 Choose the setting (»HDMI Auto«, »1080p«,
»1080i«, »720p«, »576p«, »576i« ) by using
»A« or »S« and press »ENTER« to con-
firm.
1 In the »Settings« menu select »Display« by
using »A« or »S« and press »ENTER« to
confirm.
2 Select »TV Type« by using »A« or »S« and
press »ENTER« to confirm.
13-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL-SETUP----------------------------------------------------------------------------------------------------------------------
Note:
Selecting-the-film-mode
7
The output resolution is based on the type
The movies are recorded on film at a rate of 24
frames per second. However not all televisions
can display 24 frames per second. Off can be
selected for 50 frames per second format.
of LED/LCD-TV connected to the device, as
described in the table below:
Correct
Resolution
Setting
Only the HDMI output of the player is capable
of supporting1080 p video output at any frame
rate.
LED/LCD-TV TYPE
If your TV is a standard-defini-
tion PAL TV (SD TV)
If your TV is an enhanced-defini-
tion TV (EDTV)
If your TV is a high-definition TV
(HDTV) capable of 720p only
If your TV is a high-definition TV
(HDTV) capable of 1080i only
576i/480i
576p/480p
720p
1 In the »Display« menu select »Film Mode
(1080p24)« by using »A« or »S« and
press »ENTER« to confirm.
2-Choose the setting (»Auto«, »Off«) by using
»A« or »S« and press »ENTER« to con-
firm.
1080i
Setting-deep-color
If your TV is HDMI equipped,
and if your TV is a high-defi-
nition TV (HDTV) capable of 1080p
1080p [any frame rate], and (HDMI)
you are connected to your TV
via HDMI,
If your TV is HDMI equipped,
and you are connected to
your TV via HDMI, and you
wish the BD player to set the
output based on information
exchanged between the TV
and the player over the HDMI
cable.
HDMI 1.3 supports 10-bit, 12-bit and 16- bit
(RGB or YCbCr) color depths while 8-bit was
supported in previous versions. This expands the
colors displayed from millions to billions, which
is much more vivid than the previous.
1 In the »Display« menu select »Deep color« by
using »A« or »S« and press »ENTER« to
confirm.
HDMI auto
2-Select »Auto« or »Off« by using the cursor but-
tons and press »ENTER« to confirm.
End-settings-for-the-LED/LCD-TV
1 Press »SETUP« to return to the main menu.
Selecting-the-TV-format
The setting depends on your LED/LCD-TV. If you
have a LED/LCD-TV with a 4:3 format, select the
4:3 setting; if you have a LED/LCD-TV with a
16:9 format, select the 16:9 setting.
1 In the »Display« menu select »TV Aspect« by
using »A« or »S« and press »ENTER« to
confirm.
2 Choose the setting (»16:9 Wide«, »16:9 Pillar-
box«, »4:3 Pan and Scan«, »4:3 Letterbox«)
by using »A« or »S« and press »ENTER«
to confirm.
14- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL-SETUP-----------------------------------------------------------------------------------------------------------------------
6-Select »IP address« by using »A« or »S«
and press »ENTER«.
Enter the IP address by using the number but-
Network-settings
The device must be connected to a wired router
with an ethernet cable.
Please see chapter "CONNECTION AND PREP-
ARATION".
tons.
Select »Ok« by using »S« and press
»ENTER« to confirm,
or select »Cancel« by using »s« and press
1 Press »SETUP« to open the main menu.
2 In the main menu select »Settings« by using
»A« or »S« and press »ENTER« to con-
firm.
»ENTER« to cancel the setting.
7-Select »Subnet Mask« by using »A« or »S«
and press »ENTER«.
Enter the Subnet Mask by using the number
3 Select »Network« by using »A« or »S«
and press »ENTER« to confirm.
buttons.
Select »Ok« by using »S« and press
»ENTER« to confirm,
or select »Cancel« by using »s« and press
Language
Network
Parental
Interface
Wired
Link Status
MAC Adress
IP Mode
Link Down
00:22:84:fb:c 6c:65
Manual
System
Network
»ENTER« to cancel the setting.
Settings
IP Adress
0.0.0.0
Subnet Mask
Gateway
0.0.0.0
8-Select »Gateway« by using »A« or »S«
and press »ENTER«.
0.0.0.0
BD-Live
Display
Primary DNS
Secondary DNS
0.0.0.0
0.0.0.0
Enter the Gateway address by using the
number buttons.
Audio
Select »Ok« by using »S« and press
»ENTER« to confirm,
or select »Cancel« by using »s« and press
4 Select »IP Mode« by using »A« or »S« and
press »ENTER« to confirm.
»ENTER« to cancel the setting.
5 Choose the setting (»Dynamic« or »Manual«)
by using »A« or »S« and press »ENTER«
to confirm.
Note:
7
-The primary and secondary DNS (Domain
Name System) in the next setting are the
network adresses of the server allocated by
the provider.
Notes:
7
The IP Mode option provides two configura-
tion modes for IP:
– Dynamic – Enables DHCP, the addresses
are automatically assigned by the router.
– Manual – Requires user to config-
ure network settings such as IP ad-
dress, subnet mask, gateway, etc.
It is able to show subnet mask, gateway,
primary DNS, secondary DNS when "IP
Mode" is set as "Manual".
9-Select »Primary DNS« by using »A« or
»S« and press »ENTER«.
Enter the Primary DNS by using the number
buttons.
Select »Ok« by using »S« and press
»ENTER« to confirm,
or select button »Cancel« by using »s« and
press »ENTER« to cancel the setting.
7
If you choose the option "Dynamic", go to
step 11.
If you choose the option "Manual", continue
with step 6).
15-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL-SETUP-----------------------------------------------------------------------------------------------------------------------
10-S- elect »Secondary DNS« by using »A« or
»S« and press »ENTER«.
Enter the Secondary DNS by using the
number buttons.
Select »Ok« by using »S« and press
»ENTER« to confirm,
or select »Cancel« by using »s« and press
»ENTER« to cancel the setting.
11--Select »Apply« by using »S« and press
»ENTER« to confirm the setting;
or
select »Cancel« by using »s« and press
»ENTER« to cancel the setting.
12--If the connection is successful, »Network Test«
appears.
End setting by using »ENTER«.
16- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
BD/DVD-PLAYBACK-------------------------------------------------------------------------------------------------
This item incorporates
Special-features-of-the-DVD
copyright protection
You can recognise a
technology that is pro-
DVD by the logo on the
tected by U.S. patents
label.
and other intellectual
The discs have one or
more tracks depending
on the content of the DVD.
property rights. Use of this copyright protection
technology must be authorized by Rovi Corpora-
tion, and is intended for home and other limited
Each track can contain one or more chapter. Se-
lecting the track and chapter is simple and con-
venient.
viewing uses only unless otherwise authorized
by Rovi Corporation. Reverse engineering or dis-
assembly is prohibited.
You can control and direct playback of a DVD
using the menu of the DVD player on the televi-
sion screen.
Special-features-of-Blu-ray-Discs
The massive storage capacity of a Blu-ray (BD)
Disc allows a far higher standard of picture and
audio quality and a wealth of special effects and
enhanced features.
Preparation
1 Switch on the LED/LCD TV, select the input
setting on the LED/LCD TV that matches the
connection method you used to connect the
Blu-ray player.
BLU-RAY AND JAVA
This player features Java support, enabling you
to get the most out of the latest Blu-ray Discs.
When a BD disc is loaded, always explore the
title menu to enjoy these extra features.
2 If an audio system or an AV receiver is con-
nected to the Blu-ray player, switch it on and
select the audio input for the Blu-ray player.
BLU-RAY AND HDMI
HDMI is the only domestic medium capable of
transmitting the huge volumes of data required
by the very high picture resolutions and ad-
vanced digital audio codecs that make Blu-ray
such an exciting medium.
3 Switch on the Blu-ray player.
– If there is no disc in the compartment,
»NO DISC« appears after a short time.
– If a disc has been inserted, it is scanned and
»LOAD« appears.
PLAYING A BLU-RAY DISC
Blu-ray Discs play very much like standard DVDs
but with a very much higher level of interactivity.
All the standard features of DVD player operate
exactly the same but there are some differences.
Inserting-the-disc
1 Press » « to open the disc compartment.
– Display: »OPEN«.
2 Insert the disc in the compartment with its label
facing upwards.
3 Press » « to close the disc compartment.
– Display: »CLOSE« and then »LOAD«; the disc
is scanned and then the total duration of the
disc is shown.
– The disc menu opens automatically.
Note:
7
Some disc menus direct you to set the menu
language first. If that happens, select the
language by using cursor buttons and press
»ENTER«.
17-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
BD/DVD-PLAYBACK-------------------------------------------------------------------------------------------------
Playback
Additional-playback-functions
1 Select »Play« if this option is available by using
the cursor buttons and press »ENTER«;
or
press » « to start playback.
– The playback starts.
Viewing-information-
You can view information about the title, chapter,
playing time and much more on the screen.
1-Press »OSD« on the on the remote control.
– Display: The information line appears.
Note:
7
If the message »Prohibited« appears on the
television screen, the selected function is not
possible with this disc.
2-Press »OSD« on the on the remote control to
deactivate the function.
– Display: The information line disappears.
2 Press » « to pause playback (freeze frame).
3 Press » « to resume playback.
Disc-menu-navigation-
The disc may contain several titles and chapters
you can choose from.
4 Press »7« to interrupt playback.
1 Press »DISC-MENU« on the remote control.
– Main menu of the disc opens.
5 Press » « to resume normal playback.
6 To stop playback, press »7« twice.
2 Select the title that you want by using the cur-
sor buttons and press »ENTER« to confirm.
Removing-the-disc
1 Press » « to open the disc compartment.
2 Remove the disc from the compartment.
3 Press » « to close the disc compartment.
3 In the selected title, choose the chapter or part
that you want by using the cursor buttons and
press »ENTER« to confirm.
4 Press »DISC-MENU« on the remote control to
return to the main menu of the disc.
Adjusting-the-volume
1-Adjust the volume by pressing »–-VOLUME-«
or » VOLUME-+« on the remote control.
Fast-forward-and-fast-reverse
1 During playback, press »3« on the remote
control to fast reverse,
or press »4« on the remote control to fast
forward through the disc.
Muting
1-Activate the mute with »MUTE« on the remote
control.
– Display: » -X Off«.
Note:
7
When you repeatedly press the button, each
2-Deactivate the mute with » MUTE-« on the re-
mote control.
– Display: » -On«.
time the fast forward or fast reverse mo-
tion speed changes. The speed increases
through the following sequence: Fast x 2,
Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast
x 64, Fast x 128.
2 Press » « to resume normal playback.
– Playback continues.
18- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
BD/DVD-PLAYBACK-------------------------------------------------------------------------------------------------
Selecting-previous-and-next-
chapters
Repeating-a-chapter-or-a-track
(controlled by the Blu-ray Disc)
1 During playback, press »
vious chapter or press »
chapter.
– When you release the button, the device
skips the current chapter and playback starts
from the selected chapter.
« to play the pre-
« to play the next
1 During playback, press »REPEAT« repeatedly
to select a repeat mode: »Repeat Title«, »Re-
peat Chapter«, »Repeat Off«.
– Display: »
is repeated.
– Display: »
Repeat Title«, the current title
Repeat Chapter«, the current
chapter is repeated.
Search-functions
2 To quit the function, press again »REPEAT«
until »Repeat Off« appears on display.
– Display: » Repeat Off «.
1 Press »SEARCH« repeatedly to switch be-
tween search modes: »Goto Title«, »Goto
Chapter« and »Goto Time«.
2-In the selected mode, press number buttons
and »ENTER« button to select the point you
want to play.
Repeating-a-selected-section-
(controlled by the Blu-ray Disc)
1 During playback, press »A-B« to select a start
point for a section to be repeated.
Note:
7
For example to select title 4, you should
– Display: »
Repeat A-«, the start point of
press respectively the buttons »0«, »0«, »0«,
»4«, »ENTER«.
– Playback of the selected point starts au-
tomatically.
the section is selected.
2 At the point you want to be the end point, press
»A-B-« again to set the end point for the sec-
tion to be repeated.
Enlarging-or-reducing-the-picture
(only DVD)
– Display: »
the section is selected. The selected section
starts to be repeated.
Repeat A-B«, the end point of
1 Press »ZOOM« repeatedly to switch between
»Zoom Off«, »Zoomx2 « and »Zoomx4«.
– Display: » Zoom x2 «, the selected part
of the picture is enlarged 2 times.
3 To quit the function, press again »A-B« until
»Repeat Off« appears on display.
– Display: »
Repeat Off «.
– Display: » Zoom x4 «, the selected part
of the picture is enlarged 4 times.
Selecting-and-displaying-subtitles
If the disc provides subtitles, they can be dis-
played on your TV screen.
If the subtitles are available in several languag-
es, you can select the one you want.
Note:
7
You can move the picture with »a«, »s«,
»A« or »S« on the screen.
1 During playback, press »SUBTITLE« on the re-
mote control.
– »Subtitle« and »PIP Subtitle« menu appears.
2 To quit the function, press again »ZOOM«
until »Zoom Off« appears on display.
– Display: » Zoom Off «.
2 Select the Subtitle menu that you want by us-
ing the cursor buttons and press »ENTER« to
confirm.
Frame-by-frame-playback
1 During playback, press »!8« to advance
the scene frame by frame.
2 Press » «to resume playback.
19-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
BD/-DVD-PLAYBACK-----------------------------------------------------------------------------------------------
3 In the selected Subtitle menu, select the options
that you want by using the cursor buttons and
press »ENTER« to confirm.
1 During playback, press »POPUP-MENU/
TITLE-MENU« to open pop-up or title menu.
2 Select the option that you want by using the
cursor buttons and press »ENTER« to confirm.
– Display: for example » 01/02 DEU«.
4 To switch of the subtitles, select »Subtitle Off«
at step 3 by using the cursor buttons and
press »ENTER« to confirm.
3 To quit the function, press »POPUP-MENU/
TITLE-MENU« again.
Selecting-the-camera-angle-for-par-
ticular-scenes-or-passages
Some discs provide scenes or passages which
were filmed several times from different camera
angles.
Notes:
7
You can set the subtitle from the disc menu
also. Please see "Disc menu navigation" sec-
tion.
7
While playing video files from a USB or an
1 During playback, press »ANGLE« on the re-
mote control.
– Angle menu appears.
optical disc, to clearly obtain all the char-
acters in subtitles, the subtitle file must be in
UTF-8 format. The name of the video file and
the subtitle file should be the same.
2 Select the angle that you want by using the
cursor buttons and press »ENTER« to confirm.
– Display: for example »01/03«.
In order to prepare UTF-8 format, you
should do the following method:
Playing-secondary-video-(Picture-in-
picture-/-PIP)
(controlled by the Blu-ray Disc)
1 Open the .srt file in the NotePad applica-
tion.
2 Go to the "File" drop-down menu and se-
1 During playback, press »PIP« on the remote
control to turn on secondary video (picture in
picture / PIP) function.
– The secondary video playback appears on
display.
lect "Save As...".
3 The file name and file type will remain the
same.
4 Under the Encoding section of this win-
dow, select the "UTF-8" option from the
drop-down menu.
2 To quit function press »PIP« again.
5 Click "Save" to keep your changes.
Selecting-the-dubbed-language-for-
the-PIP-function-
Selecting-the-dubbed-language-or-
the-audio-format
These settings allow you to listen to a dubbed
language other than the default one if the disc
provides alternatives.
(controlled by the Blu-ray Disc)
1 During PIP playback, press »SECONDARY-
AUDIO« on the remote control.
– The secondary audio menu opens.
2-Select »On« or »Off« by using the cursor but-
tons and press »ENTER« to confirm.
1 During playback, press »AUDIO« on the re-
mote control.
– »Audio« and »PIP Audio« menu appears.
Using-the-color-buttons
The RED, GREEN, YELLOW and BLUE buttons
are used with interactive menus when operat-
ing a BD-Video disc that includes JavaTM ap-
plications (BD-J). For more information about
operating this kind of a disc, please read the
instructions that came with the disc.
2 Select the dubbed language that you want by
using the cursor buttons and press »ENTER« to
confirm.
Pop-up-menu/Title-menu
If the disc provides pop-up or title menus, you
can use this function.
20- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
BD-LIVE-----------------------------------------------------------------------------------------------------------------------------------------------
Some Blu-ray discs contain additional features
Setting-up-the-player-for-BD-Live-
that are made available to players that are con-
internet-access
nected to the internet, and have additional mem-
ory added.
1 Press »SETUP« to open the main menu.
2 In the main menu select »Settings« by using
»A« or »S« and press »ENTER« to con-
firm.
These additional features may include things like:
– the ability to download new movie trailers,
– additional "commentary" by actors and di-
rectors,
3 Select »BD-Live« by using »A« or »S« and
press »ENTER« to confirm.
– multiperson game play and chat.
In order to access BD-Live functions, the player
must be properly configured for BD-Live internet
access, and it must be equipped with additional
memory.
4 Select »BD-Live Internet Access« by using
»A« or »S« and press »ENTER« to con-
firm. Make sure that the option »Limit Access«
or »Always Allow Access« is selected.
Adding-BD-Live-memory-to-the-
5 Select »Limit Access« or »Always Allow Access«
by using »A« or »S« and press »ENTER« to
confirm.
player
1 Insert an at least 1Gbyte USB memory stick
into a PC drive, and make sure that it is format-
ted as FAT32.
Note:
7
Once the USB memory stick has been in-
serted, if there is not at least 100 Mbyte of
free space on the device, you should choose
»Erase Blu-ray Storage« from the »BD-Live«
setup menu item.
2 Insert the USB plug of the USB memory stick in
the »
« socket on the device (see "CON-
NECTION AND PREPARATION" section).
6 Press »RETURN« and select »Network« by
using »A« or »S« and press »ENTER« to
confirm.
Select »Network Test« by using the cursor but-
tons and press »ENTER« to confirm.
Note:
7
The "Link Status" must show that you are con-
nected to the internet, otherwise you can-
not access BD-Live content on the web (see
"CONNECTION AND PREPARATION/
Connecting to the internet with ethernet ca-
ble" section).
7 Press »RETURN« to return to the main menu.
21-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
BD-LIVE-----------------------------------------------------------------------------------------------------------------------------------------------
Using-BD-Live
1 Press » « to open the disc compartment.
BD-Live-notes
The Broadcom Reference system only supports
7
the connection of USB memory in order to ful-
fill the BD 2.0 1GByte memory requirement.
2 Insert the Blu-ray Disc in the compartment with
its label facing upwards.
7
You must have the BD-Live disc in the player
to play any related (already downloaded)
content.
3 Press » « to close the disc compartment.
4 Press » « to start playback.
5 During playback, press »POPUP- MENU/-
TITLE- MENU« to open the pop-up or title
menu.
7
Some BD-Live content could expire and will
not play. You may need to manually delete the
contents in storage in order to have free space.
To do this, select respectively: »Settings«, »BD-
Live«, »Erase Blu-ray Storage«.
6 Select »BD LIVE« by using »A«, »S«, »a«
or »s« and press »ENTER« to confirm.
– In a few minutes, the BD-Live Menu appears.
7
A clock is not used to manage the expiration
of downloaded BD-live content. Instead, time
and expiration of content is managed by the
BD-Live server on the internet.
7 Select the content to download from the »Pre-
views« sub menu. The download is depending
on the content size and network speed.
– The downloaded content is stored under
»Media« – »USB« on the external USB
memory stick. You can choose to either play-
back or delete the downloaded content.
22- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING-AUDIO/VIDEO-FILES---------------------------------------------------------
Playing-a-title,-a-track-or-a-picture
Playing-the-contents-of-a-data-
device-or-a-USB-memory-stick
1-Select »Videos«, »Music« or »Pictures« by us-
ing »A« or »S« and press »ENTER« to
confirm.
Preparation
1 Switch off the Blu-ray player with »8«.
2-Chose the file from the selected option by us-
ing »A« or »S« and press »ENTER« to con-
firm.
2 Connect a data device to the »
using a standard USB cable;
or
« socket
3-Press » « to start playback.
– The selected file starts playing.
insert the USB plug of the USB memory stick in
the »
« socket on the device.
File 1/5 song1.mp3
Title: Cool Track
Artist: Ricardo Funiccio
Album: Dead Dux
3 Switch on the LED/LCD-TV, select the input
setting on the TV that matches the connection
method you used to connect the Blu-ray player.
0:02:00
Play
0:30:00
Off
Off
4-To stop playback, press »7«.
4 Switch on the Blu-ray player with »8«.
5 Press »SETUP« to open the main menu.
Additional-playback-functions
Press » « to pause playback.
Press » « again to resume playback.
7
6-Select »Media« by using »A« or »S« and
press »ENTER« to confirm.
– The external device menu opens.
7
Select the playback speed during playback
by pressing »3« or »4«.
7
7
During playback, select the next track/picture
Videos
you want with »
track/picture with »
« or select the previous
«.
Music
Media
USB
During playback, press »REPEAT« repeatedly
to select a repeat/random mode:
– »Repeat All«,
Picture
– »Random On«,
– »Repeat File«,
– »Repeat Off«.
7-Confirm »USB« with »ENTER«;
or
select »USB« (if a disc is inserted – display
»Optical Disc«) by using »A« or »S« and
press »ENTER« to confirm.
7
While playing back the picture, to enlarge the
picture press »ENTER« repeatedly.
Move the picture with »A«, »S«, »a« or
»s« on the screen.
7
To set slide show effects and slide show delay
for pictures:
press »POPUP-MENU-TITLE-MENU«,
select »Slide Show Effects« or »Slide Show
Delay« with »A« or »S«, press »ENTER«
to confirm, select the required effect or the de-
lay with »A« or »S« and press »ENTER«
to confirm.
23-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING-AUDIO/VIDEO-FILES---------------------------------------------------------
Displaying-a-picture
Playing-picture-CDs
It is possible to display digital picture files or mu-
sic files that have been burned onto a data disc,
DVD+/-R, DVD+/-R/(W) or a Blu-ray Disc.
1-Chose the required picture from the summary
by using »A«, »S«, »a« or »s« and press
»ENTER« to display.
2-Press »7« to stop playback.
Preparation
1 Press » « to open the disc compartment.
– Display: »OPEN«.
Additional-functions
7
Start a slide show
2-Insert the disc with pictures into the disc com-
partment.
Select »Start Slide Show« by using »A« or
»S« and press »ENTER« to confirm. All
pictures will be displayed.
3 Press » « to close the disc compartment.
– Display: »CLOSE«.
7
Settings
Select slide show effects and slide show de-
lay.
4-Select »Media« by using »A« or »S« and
press »ENTER« to confirm.
7
Browse Music
5-Confirm »Optical Disc« with »ENTER«.
Opens the music playing menu where you
can select music files to play while you view
pictures.
6-Confirm »Pictures« with »ENTER«.
– The picture summary opens.
7
Main Menu
Picture
Optical Disc
Switches to the main menu.
Repeat
24 item(s)
Wallpaper 1080 (7).jpg
Wallpaper 1080 (8).jpg
Wallpaper 1080 (9).jpg
7
During playback, press »REPEAT« to select
Settings
Main Menu
the repeat mode:
Start Slide Show
Browse Music
Now Playing
Wallpaper 1080 (1).jpg
Wallpaper 1080 (10).jpg
Wallpaper 1080 (11).jpg
– »Repeat All«,
– »Repeat Off«.
Wallpaper 1080 (12).jpg
Wallpaper 1080 (13).jpg
Wallpaper 1080 (14).jpg
24- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING-AUDIO/VIDEO-FILES---------------------------------------------------------
Playback
Playing-audio-CDs
1-Chose the required folder from the summary
by using »A« or »S«, »a« and press »EN-
TER« to confirm.
Preparation
1 Press » « to open the disc compartment.
– Display: »OPEN«.
2-Press » « to start playback.
2-Insert the disc with audio files into the disc
– The selected folder starts playing.
compartment.
3 Press » « to close the disc compartment.
– Display: »CLOSE«.
File 1/5 song1.mp3
Title: Cool Track
Artist: Ricardo Funiccio
Album: Dead Dux
0:02:00
Play
0:30:00
Off
Off
4-Select »Media« by using »A« or »S« and
press »ENTER« to confirm.
5-Confirm »Optical Disc« with »ENTER«.
3-Press »7« to stop playback.
6-Confirm »Music« with »ENTER«.
– The folder summary opens.
Additional-playback-functions
7
Press » « to pause playback.
Press » « again to resume playback.
7
7
Select the playback speed during playback
by pressing »3« or »4«.
During playback, select the next title you
want with »
with » «.
« or select the previous title
7
During playback, press »REPEAT« repeatedly
to select a repeat/random mode:
– »Repeat All«,
– »Random On«,
– »Repeat File«,
– »Repeat Off«.
7
7
Confirm »Previous folder« by pressing
»ENTER«, to select the summary.
During playback, press »ENTER« and select
»Main Menu«, to switch to the main menu.
25-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
NetFusion-MODE-----------------------------------------------------------------------------------------------------------
About-NetFusion
Setting-NetFusion-function
1-Switch on the Blu-ray player with »8«.
7
The device supports NetFusion. This allows
you to combine media streaming with
controlling a connected media receiver
while streaming content to it from another
PC on a network.
2 Press »SETUP« on the remote control to open
the main menu.
3 In the main menu select »Settings« by using
»A« or »S« and press »ENTER« to con-
firm.
7
You can easily access the Video, music and
image files on the server through the NetFu-
sion menu of your player.
4 Select »System« by using »A« or »S« and
press »ENTER« to confirm.
– The System menu opens.
7
You can share your video, music and image
files through devices such as PC, mobile
phone or NAS (Network Attached Storage)
that function as DMS (Digital Media Server)
compatible with NetFusion.
Audio
System
Language
Optical Disc Auto Play
NetFusion
Enable
On
Parental
System
Screen Saver Duration
Auto Power Down
Digilink
5 Minutes
20 Minutes
Off
Settings
7
The player can also operate with DMS soft-
Update Via Network
Restore factory defaults
System Information
ware that can be installed on a computer
but, it is not guaranteed that it will run in full
compatibility with software without a DMS
certificate.
Network
BD-Live
Display
5 Select »NetFusion« by using »A« or »S«
and press »ENTER« to activate.
Select »On« by using »A« or »S« and
7
If you use a computer running with Windows
operating system, it can be configured as
Windows Media Player (Version 11) Digital
Media server.
press »ENTER« to confirm.
Settings to be made depend on the relevant
software.
In order not to encounter any problems with
media sharing, check the firewall settings of
your modem and computer.
6 Press »RETURN« and select »Network« by us-
ing »A« or »S«.
Check the network connection.
7 Press »RETURN« to return to the main menu.
26- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
NetFusion-MODE-----------------------------------------------------------------------------------------------------------
Preparation
Using-NetFusion-function
1-Switch on the Blu-ray player with »8«.
1-Select »Videos«, »Music« or »Pictures« by us-
ing »A« or »S« and press »ENTER« to
confirm.
2 Press »SETUP« on the remote control to open
the main menu.
2-Depending on the configuration of the shared
media choose the file/title from the selected
option by using »A« or »S« and press
»ENTER« to confirm.
3 In the main menu select »NetFusion« by using
»A« or »S« and press »ENTER« to con-
firm.
– Display: »
Discovering«.
3-Press » « to start playback.
– The selected folder/file starts playing.
4 Select the shared media from the menu by
using »A« or »S« and press »ENTER« to
confirm.
File 1/5 song1.mp3
Title: Cool Track
Artist: Ricardo Funiccio
Album: Dead Dux
Videos
0:02:00
Play
0:30:00
Off
Off
Music
Nort(A00045747)
Discovering
NetFusion
NetFusion
NetFusion
4-To stop playback, press »7«.
Picture
Note
7
File and folder structure of the DMS device
in menu may vary depending on the Digital
Media Server software in use.
7
7
Subtitles are not supported on video files
that are played through the DMS device.
Video files played through DMS device
support following formats that have ob-
tained NetFusion certificate: »MPEG_PS_
PAL«, »MPEG_TS_SD_EU«, »MPEG_TS_
SD_ EU_T« and »MPEG_TS_SD_EU_ISO«.
7
7
Audio files played through DMS device sup-
port following formats that have obtained
NetFusion certificate: »LPCM« and »MP3«.
Image files played through DMS device sup-
port following formats that have obtained
NetFusion certificate: »JPEG_SM«.
Additional-playback-functions
7
See chapter "Playing Audio/Video files",
depending on the file in use.
27-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL-SETTINGS------------------------------------------------------------------------------------------------------
– Bitstream HD: Original bitstream from disc is
passed over HDMI and SPDIF using highest
1 Press »SETUP« on the remote control to open
quality possible. HDMI has higher quality
Audio-settings
the main menu.
capabilities with advanced audio codecs
2 In the main menu select »Settings« by using
»A« or »S« and press »ENTER« to con-
firm.
like TrueHD and DTS-HD. BD audio limited
to soundtrack for main movie (i.e. no PiP au-
dio, no effects audio).
3 Select »Audio« by using »A« or »S« and
press »ENTER« to confirm.
– The audio menu opens.
– Bitstream Legacy: Original bitstream from
disc is passed over HDMI and SPDIF using
legacy audio formats. BD audio limited to
soundtrack for main movie (i.e. no PiP au-
dio, no effects audio).
Network
Audio
BD-Live
PCM Down sampling
Digital Output
48 kHz
PCM
Off
– Bitstream Mixed: BD audio streams are
mixed and encoded into a single bitstream.
Primarily intended for customers with SPDIF
5.1CH receivers who want to enjoy mixed
BD audio in surround sound.
Display
Audio
Dynamic Range Control
Stereo Downmix
Settings
Auto
Language
Parental
System
Dynamic-Range-Control
Is only active when a Dolby Digital signal is
detected.
Options:
– Off: you can enjoy the movie with the stand-
ard Dynamic Range.
4 Select the required function by using »A« or
»S« and press »ENTER« to activate.
5 Select your required settings by using »A« or
»S« and press »ENTER« to confirm.
6 Press »RETURN« or »a« to close the sub-
menu;
or
– On: when movie soundtracks are played at
low volume or from smaller speakers, the sys-
tem can apply appropriate compression to
make low-level content more intelligible and
prevent dramatic passages from getting too
loud.
– Auto: the system turns on the Dynamic range
control for all BD movie soundtracks except
Dolby TruHD. If you have selected a Dolby
TruHD track on the BD disc, Auto tells the
player to only turn on dynamic range control
if information embedded in the Dolby TruHD
sound track tells it to do so.
press »SETUP« to return to the main menu.
Existing-settings-in-the-Audio-
menu
PCM-Downsampling
Sets the player’s digital output PCM sampling
rate.
Options: 48 kHz, 96 kHz, Off.
Incorrectly setting the digital audio output’s
PCM sampling rate may result in unpredict-
able audio playback.
Stereo-Downmix
Sets »AUDIO- OUT- L/R« output to Auto,
Stereo (LoRo) or Surround Encoded (LtRt).
Digital-Output
Sets the player’s digital audio output sockets.
Options:
– PCM: Mixed digital audio sent over HDMI
in PCM (if supported by HDMI device) and
SPDIF in two channel PCM format.
28- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL-SETTINGS------------------------------------------------------------------------------------------------------
Language-settings
1 Press »SETUP« on the remote control to open
the main menu.
Existing-settings-in-the-Language-
menu
Note:
7
Not all languages are available on all discs.
Most discs only have one menu, audio or
subtitle language available.
2 In the main menu select »Settings« by using
»A« or »S« and press »ENTER« to con-
firm.
3 Select »Language« by using »A« or »S«
and press »ENTER« to confirm.
– The language menu opens.
OSD-Language
Sets the language of the player’s screen menu.
You can choose between several languages.
BD-Live
Language
Menu-Language
Sets the preferred menu language as the de-
fault language for the disc.
Display
OSD
English
Auto
Audio
Menu
Audio
Subtitle
Auto
Settings
Language
None
Audio-Language
Sets the preferred audio language as the de-
fault language for the disc.
Parental
System
Network
Some discs do not allow the user to select the
audio language from the player setup menus.
The audio language can only be selected from
the BD/DVD disc setup menu (the menu that
appears after the disc has been inserted).
4 Select the required function by using »A« or
»S« and press »ENTER« to activate.
5 Select your required settings by using »A« or
»S« and press »ENTER« to confirm.
Subtitle-Language
Sets the preferred subtitle language as the de-
fault language for the disc.
6 Press »RETURN« or »a« to close the sub-
menu;
or
Some discs do to not allow the user to select
the subtitle language from the player setup
menus. The subtitle language can only be se-
lected from the BD/DVD disc setup menu (the
menu that appears after the disc has been in-
serted).
press »SETUP« to return to the main menu.
29-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL-SETTINGS------------------------------------------------------------------------------------------------------
Parental-control-
1 Press »SETUP« on the remote control to open
the main menu.
Existing-settings-in-the-Parental-
menu
Parental-Control-(On/Off)
2 In the main menu select »Settings« by using
»A« or »S« and press »ENTER« to con-
firm.
The parental control function works in conjunc-
tion with the different censorship classes as-
signed to discs. These classes help to control
the types of disc that the family watches. There
are up to 8 censorship classes for discs.
3 Select »Parental« by using »A« or »S« and
press »ENTER« to confirm.
– The Parental Password menu opens.
Parental-Level
Display
Parental Control
Off
Sets different censorship classes assigned to
discs such as:
– 1[Kid Safe]: Suitable for all children.
– 2[G]: General audiences.
Audio
Please enter new parental control password
La
Parental
P
Ok
Cancel
– 3[PG]: Parental guidance suggested.
– 4[PG-13]: Not suitable for anyone under 13.
– 5[PG-R]: Parental guidance recommended.
– 6[R]: Not suitable for anyone under 17 un-
less supervised by a parent or adult guard-
ian.
Sy
Network
Parental Password
BD-Live
4 Enter your password with the numeric button
»0« »0« »0« »0«, select »Ok« with »S« and
press »ENTER« to confirm.
– 7[NC-17]: Not suitable for anyone under 17.
– 8[Adult]: All discs can be played.
Display
Parental
Parental-Password
Audio
Parental Control
Parental Level
On
Language
Parental
System
Sets the password as a 4 digit number.
Enter your new password with the numeric but-
tons »1...0«, select »Ok« with »S« and press
»ENTER« to confirm.
8 (Adult)
Parental Password
Settings
Network
BD-Live
Please do not forget the password you choose.
5 Select the required function by using »A« or
»S« and press »ENTER« to activate.
6 Select your required settings by using »A« or
»S« and press »ENTER« to confirm.
7 Press »RETURN« or »a« to close the sub-
menu;
or
press »SETUP« to return to the main menu.
30- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL-SETTINGS------------------------------------------------------------------------------------------------------
NetFusion
System-settings
Activates the access to the Digital Media
Server.
1 Press »SETUP« on the remote control to open
the main menu.
2 In the main menu select »Settings« by using
»A« or »S« and press »ENTER« to con-
firm.
Screen-Saver-Duration
Sets the time of entering screen saver status
(Black screen). If the screen saver duration is
off, there will not be black screen.
3 Select »System« by using »A« or »S« and
press »ENTER« to confirm.
– The System menu opens.
Auto-Power-Down
Audio
Automatically turns the player off if no settings
are changed after a selected period of time
(5, 10, 20 or 30 minutes).
System
Language
Optical Disc Auto Play
NetFusion
Enable
On
Parental
System
Screen Saver Duration
Auto Power Down
Digilink
5 Minutes
20 Minutes
Off
Settings
Digilink-(CEC)
Update Via Network
Restore factory defaults
System Information
Network
BD-Live
Can be used to allow the LED/LCD TV remote
control to control certain functions of the Blu-
Ray player and for the Blu-Ray player to con-
trol certain functions of the LED/LCD TV.
Not all LED/LCD TVs are compatible with your
player.
Display
5 Select the required function by using »A« or
»S« and press »ENTER« to activate.
6 Select your required settings by using »A« or
»S« and press »ENTER« to confirm.
– On: allows mutual control of devices
through HDMI.
– Off: does not allow CEC control.
7 Press »RETURN« or »a« to close the sub-
menu;
or
Update-Via-Network
Downloads and installs product updates for
your player.
press »SETUP« to return to the main menu.
If there is a new software available, the device
updates itself if it is connected to network.
Existing-settings-in-the-System-
menu
Restore-Factory-Defaults
Resets your player to the default factory set-
tings.
Optical-Disc-AutoPlay
There are two options:
– Disable: Once you have inserted the disc,
press » « or »ENTER« to start the play-
back.
– Enable: Once you have inserted the disc,
the playback starts automatically or the
discmenu is diplayed automatically.
After presing »ENTER« a warning message
appears. Select »Ok« to confirm or »Cancel«
to cancel the function and press »ENTER« to
close the menu.
Restore function does not reset the "Parental
Control Password".
System-Information
Indicates information about the player.
31-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION-------------------------------------------------------------------------------------------------------------------
Licence-conditions
Environmental-note
Manufactured under li-
This product has been man-
cense from Dolby Labora-
tories.
Dolby and the double-D
symbol are trademarks of
ufactured with high quality
parts and materials which
can be reused and are suit-
able for recycling.
Dolby Laboratories.
Therefore, do not dispose the product with nor-
mal domestic waste at the end of its service life.
Take it to a collection point for the recycling of
electrical and electronic equipment. This is indi-
cated by this symbol on the product, in the user
manual and on the packaging.
Manufactured under license
under U.S. Patent Nos:
5,956,674; 5,974,380;
6,487,535 & other U.S.
and worldwide patents is-
sued & pending. DTS, the Symbol, & DTS and
the Symbol together are registered trademarks
and the & DTS Digital Surround and the DTS
logos are trademarks of DTS, Inc. Product in-
cludes software. DTS, Inc. All Rights Reserved.
Please consult your local authorities to learn the
nearest collection point.
Help protect the environment by recycling used
products.
General-information-on-laser-devices
This item incorporates cop-
yright protection technol-
This device is a
LASER RADIATION
CLASS 2 LASER
DO NOT STARE INTO BEAM
ogy that is protected by
CLASS 2 LASER PRODUCT
PRODUCT. This
Pmax=0,093mW (λ=405nm)
U.S. patents and other in-
tellectual property rights.
IEC 60825-1:2007
means that the de-
vice emits laser
radiation which is safe for momentary expo-
sures, but can be hazardous for deliberate star-
ing into the beam.
Use of this copyright protection technology must
be authorized by Rovi Corporation, and is in-
tended for home and other limited viewing uses
only unless otherwise authorized by Rovi Corpo-
ration. Reverse engineering or disassembly is
prohibited.
Caution:
7
Do not stare into beam.
7
If operating devices or
methods other than those
specified here are em-
ployed, it may lead to
dangerous exposure to emissions.
7
This device emits laser radiation. Because of
the danger of eye injuries, the unit may only be
opened or serviced by trained personnel.
7
If settings other than those stated here are used
or other procedures are carried out, this may
lead to dangerous exposure to radiation.
32- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION-------------------------------------------------------------------------------------------------------------------
Cleaning-the-device-
System
Pull out the power cord from the wall socket.
Clean the device by using a soft cloth slightly
moistened with a mild detergent solution. Do not
use a solution containing alcohol, spirits, ammo-
nia or abrasives.
Power-supply
Operating voltage:
Mains frequency:
110 - 240 V
50/60 Hz
17 W
~
Max. power consumption:
Power consumption in standby: ≤ 1 W
Cleaning-the-disc
Playback-standard
PAL, 50 Hz, 625 lines
NTSC, 60 Hz, 525 lines
If the device is unable
to scan CDs perfectly,
use a standard, com-
mercially available
cleaning CD to clean
the laser optics.
Disc-types
BD, DVD- video Disc (DVD-ROM), DVD-RW,
DVD+RW, DVD-R, DVD+R, video CD (VCD),
WMA, JPEG, MPEG4, CD-R, CD-RW, MP3
Other cleaning meth-
ods may damage the laser optics.
Use a lint-free cloth for cleaning the CD and al-
ways wipe it from the inside out in a straight line.
Do not use cleaning agents for conventional vinyl
discs, nor any solvents or abrasive cleaners.
USB-
USB 2.0 compatible FAT 32/16
Laser
Semiconductor laser
Wavelength for BD 400 - 410 nm
Wavelength for DVD 650 - 663 nm
Technical-data
This device is noise-suppressed
according to the applicable EU
directives.
This product fulfils the European
directives 2004/108/EC, 2006/95/EC and
2009/125/EC.
Wavelength for CD 770 - 800 nm
Audio-format
Digital MPEG4, Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS Advance Digital out
The type plate is located on the back of the de-
vice.
Audio
BD/DVD 192 kHz
Signal to Noise ratio: 90 dB
Dimensions-and-weight
Device dimensions:
W x H x D :
430 x 44 x 230 mm
Device weight: 2,1 kg
Technical and design modifications reserved.
33-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION-------------------------------------------------------------------------------------------------------------------
Troubleshooting
If the following measures do not resolve the
problem satisfactorily, please contact your
specialist dealer.
Not every picture or sound problem is caused
by a defect in your device. Cables that have
accidentally been disconnected, damaged discs
and flat batteries for the remote control will
impair functioning.
To-reset-this-unit
To return all settings other
than some settings to the
factory preset.
Select Yes in Restore Default Settings in the Setup menu. This returns
all values in the Setup menu and the on-screen menu, except for
parental setting to the default settings.
Power
Insert the AC power supply cord securely into a known active AC
outlet.
No power.
This is a power saving feature.
The player switches to
standby mode.
The Auto Power Down function is activated. Press »8« on the player
to turn the device on.
Operation
The batteries are depleted. Replace them with new ones.
You are not pointing the remote control at the main unit’s remote con-
trol signal sensor during operation.
Colored glass may obstruct the signal reception/transmission.
The remote control doesn’t
work properly.
Don’t place the signal sensor in direct sunlight or in areas that may be
subject to sunlight exposure.
Select the correct playback source (BD-ROM or Media).
Some operations may be prohibited by the disc.
Reset the device as follows:
1. Press »8« on the device to switch the device to standby. If the de-
vice doesn’t switch to standby, alternatively, disconnect the AC power
supply cord, wait one minute, then reconnect it.
2. Press »8« on the device to switch it on. If the device still cannot be
operated, consult the dealer.
The player is on but cannot
be operated.
Condensation has formed: Wait 1 to 2 hours for it to evaporate.
Play fails to start even when Insert the disc correctly with the label facing up.
(PLAY) is pressed. Play
starts but then stops imme-
diately.
Startup is slow. When the
player is turned on, audio Immediately after a power failure or the AC power supply cord is
The disc is dirty.
You tried to play a blank disc or unplayable disc on this device.
Startup takes time in the following situations.
and video output takes a
long time.
connected.
When the unit is connected with an HDMI cable.
34- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION-------------------------------------------------------------------------------------------------------------------
The disc is dirty or any scratched.
The format of the disc is not supported.
Auto open while reading
the disc.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
The disc is dirty or scratched.
Check the TV system setting, switch PAL/NTSC TV system in setup
menu.
Audio and video momen-
tarily pause while reading
disc.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
The disc is dirty or any scratch.
The player is on with start
logo and menu but has no
image from the disc.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
Reset the device, when you see “ loading ” on the screen, press » « to
take out the disc, clean the disc and try it again.
If the device freezes again, the disc may have some contents the de-
vice can't support. Please stop playing the disc in this device.
The unit freezes while rea-
ding CD-R/DVD-R disc
TV-screen-and-video
Make sure that the LED/LCD-TV is connected to the VIDEO OUT so-
cket or HDMI OUT socket on this device.
Make sure that the LED/LCD-TVs input setting (e.g., VIDEO 1) is cor-
rect.
The images from this player
do not appear on the tele-
vision.
The device is likely to enter screen saver status.
Picture is distorted.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
High definition video cannot be output through the VIDEO OUT.
Confirm that the HDMI Resolution in the Setup menu is set properly.
Video is not output in high-
definition.
The 4:3 aspect ratio picture Use the LED/LCD-TV to change the aspect. Refer to your LED/LCD-TVs
expands left and right.
operating instructions.
Insert a USB memory stick with a free space. Select BD-Live Storage
from the BD-Live Menulist. Then restart the device.
Please check the internet is available or not. Some of the disc need
the support of internet.
Please check the connection cable to the router. If it is loose, please
insert again.
When it is playing BD-LIVE
disc, Video output is a
black screen.
35-
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION-------------------------------------------------------------------------------------------------------------------
Sound
Check the connections and the “Digital Output” settings. Check the
input mode on the amplifier/receiver if you have connected one.
Press »AUDIO« to select the audio signal.
No sound. Low volume.
The sound effects (Re-master, V. Surround, etc.) will not work when the
bitstream signal is output from the HDMI OUT socket or the
»COAXIAL« socket.
When “BD-Video Secondary Audio” is set to “Off”, Dolby Digital
Plus, and Dolby TrueHD are output from the »COAXIAL« terminal as
Dolby Digital or DTS Digital Surround bitstream.
Distorted sound.
Cannot hear the desired
audio type.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
There are discs for which audio cannot be changed because of how
the disc was created.
When connecting an amplifier/receiver using a coaxial cable or an
HDMI cable, you cannot switch the audio if “Digital Output” is set to
“Bitstream”. Set “Digital Output” to “PCM” or connect using audio
cables.
Cannot switch dubbed lan-
guage or the audio format .
HDMI-connections
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
Change “TV Aspect ” type to “16:9 Wide”.
BD-Live-and-USB-connections
Check if the disc is a legal copy.
Confirm whether the network connection is ok.
Cannot connect network
Check if the capacity of Storage is full. if it is full, please clear storage
in the BD-Live menu and reset the device.
Confirm whether the network connection is ok.
Change USB device and then test it.
After network connection,
cannot download file
Succeed in downloading
file, but playback pause.
Pause playing the file in the
USB device
Confirm the device is USB 2.0. if it is USB 1.1, playing may pause.
Change USB device and then test it.
36- ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
72011 411 3500 11/48
Download from Www.Somanuals.com. All Manuals Search And Download.
|