MODEL G0474 20-GALLON
& G0475 10-GALLON
SANDBLASTER
OWNER'S MANUAL
G0474
G0475
COPYRIGHT © NOVEMBER, 2005 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#CR7569 PRINTED IN CHINA
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
INTRODUCTION............................................................................................................................... 2
Foreword .................................................................................................................................... 2
Contact Info................................................................................................................................ 2
Machine Data Sheet................................................................................................................... 3
SECTION 1: SAFETY....................................................................................................................... 4
Safety Instructions for Machinery............................................................................................... 4
Additional Safety Instructions for Sandblasters ......................................................................... 6
SECTION 2: SET UP........................................................................................................................ 7
Set Up Safety............................................................................................................................. 7
Items Needed for Set Up ........................................................................................................... 7
Unpacking .................................................................................................................................. 7
Compressor................................................................................................................................ 7
Assembly.................................................................................................................................... 8
SECTION 3: OPERATIONS ........................................................................................................... 10
Operation Safety ...................................................................................................................... 10
Basic Operation........................................................................................................................ 10
Abrasive Options...................................................................................................................... 13
Nozzle Options......................................................................................................................... 13
Maintenance............................................................................................................................. 13
Parts Breakdown...................................................................................................................... 14
Parts List .................................................................................................................................. 15
WARRANTY AND RETURNS........................................................................................................ 16
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Foreword
Contact Info
We are proud to offer the Model G0474/G0475
Sandblasters. This equipment is a part of a grow-
ing Grizzly family of fine wood and metalworking
machinery. When used according to the guidelines
set forth in this manual, you can expect years of
trouble-free, enjoyable operation and proof of
Grizzly’s commitment to customer satisfaction.
If you have any comments regarding this manual,
please write to us at the address below:
Grizzly Industrial, Inc.
Technical Documentation Manager
P.O. Box 2069
C
/O
Bellingham, WA 98227-2069
We are pleased to provide this manual with the
Model G0474/G0475. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures.
We stand behind our equipments. If you have any
service questions or parts requests, please call or
write us at the location listed below.
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G0474/G0475 as supplied when the manual was
prepared. For your convenience, we always keep
current Grizzly manuals available on our website
ment will be reflected in these manuals as soon
as they are complete.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
-2-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
MACHINE DATA
Machine Data Sheet
SHEET
Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901
MODEL G0475 SANDBLASTER
Design Type ........................................................................................Portable Floor Model
General Specifications:
Width ........................................................................................................................13"
Height.................................................................................................................34-1/2"
Depth........................................................................................................................20"
Operating Air Pressure Range .................................................................... 65-125 PSI
Recommended Air Supply............................................................................. 6-25 CFM
Hose Length.......................................................................................................... 10 ft.
Tank Size ........................................................................................................... 10 gal.
Abrasive Capacity ...............................................................................................40 lbs.
Abrasive Type ................................................................................................. Dry Only
Weight ..................................................................................................................40 lbs
MODEL G0474 SANDBLASTER
Design Type ........................................................................................Portable Floor Model
General Specifications:
Width ........................................................................................................................15"
Height.................................................................................................................35-1/2"
Depth..................................................................................................................27-1/2"
Operating Air Pressure Range .................................................................... 65-125 PSI
Recommended Air Supply............................................................................. 6-25 CFM
Hose Length.......................................................................................................... 10 ft.
Tank Size ........................................................................................................... 20 gal.
Abrasive Capacity ...............................................................................................80 lbs.
Abrasive Type ................................................................................................. Dry Only
Weight ..................................................................................................................55 lbs
Specifications, while deemed accurate, are not guaranteed.
-3-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1: SAFETY
For Your Own Safety, Read Instruction
Manual Before Operating this Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This
manual uses a series of symbols and signal words which are intended to convey the level of
importance of the safety messages. The progression of symbols is described below. Remember
that safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures.
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.
This symbol is used to alert the user to useful information about
proper operation of the equipment.
NOTICE
Safety Instructions for Machinery
1. READ THROUGH THE ENTIRE MANUAL
BEFORE STARTING MACHINERY.
Machinery presents serious injury hazards
to untrained users.
4. ALWAYS USE HEARING PROTECTION
WHEN OPERATING MACHINERY.
Machinery noise can cause permanent
hearing damage.
5. WEAR PROPER APPAREL. DO NOT
wear loose clothing, gloves, neckties, rings,
or jewelry which may get caught in moving
parts. Wear protective hair covering to con-
tain long hair and wear non-slip footwear.
2. ALWAYS USE ANSI APPROVED
SAFETY GLASSES WHEN OPERATING
MACHINERY. Everyday eyeglasses only
have impact resistant lenses, they are
NOT safety glasses.
6. NEVER OPERATE MACHINERY WHEN
TIRED, OR UNDER THE INFLUENCE OF
DRUGS OR ALCOHOL. Be mentally alert
at all times when running equipment.
3. ALWAYS WEAR AN ANSI APPROVED
RESPIRATOR WHEN OPERATING
MACHINERY THAT PRODUCES DUST.
Wood dust is a carcinogen and can cause
cancer and severe respiratory illnesses.
-4-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions for Machinery
7. ONLY ALLOW TRAINED AND PROP-
WRENCHES. Make a habit of checking for
keys and adjusting wrenches before turn-
ing equipment ON.
ERLY SUPERVISED PERSONNEL TO
OPERATE EQUIPMENT. Make sure
operation instructions are safe and clearly
understood.
18. CHECK FOR DAMAGED PARTS
BEFORE USING MACHINERY. Check
for binding and alignment of parts, broken
parts, part mounting, loose bolts, and any
other conditions that may affect equipment
operation. Repair or replace damaged
parts.
8. KEEP CHILDREN AND VISITORS AWAY.
Keep all children and visitors a safe dis-
tance from the work area.
9. MAKE WORKSHOP CHILD PROOF. Use
padlocks, master switches, and remove
start switch keys.
19. USE RECOMMENDED ACCESSORIES.
Refer to the instruction manual for recom-
mended accessories. The use of improper
accessories may cause risk of injury.
10. NEVER LEAVE WHEN MACHINE IS
RUNNING. Turn power OFF and allow all
moving parts to come to a complete stop
before leaving equipment unattended.
20. DO NOT FORCE MACHINERY. Work
at the speed for which the equipment or
accessory was designed.
11. DO NOT USE IN DANGEROUS
ENVIRONMENTS. DO NOT use this equip-
ment in damp, wet locations, or where any
flammable or noxious fumes may exist.
21. SECURE WORKPIECE. Use clamps or a
vise to hold the workpiece when practical.
A secured workpiece protects your hands
and frees both hands to operate the equip-
ment.
12. KEEP WORK AREA CLEAN AND WELL
LIT. Clutter and dark shadows may cause
accidents.
22. DO NOT OVERREACH. Keep proper foot-
ing and balance at all times.
13. USE A GROUNDED EXTENSION CORD
RATEDFORTHEMACHINEAMPERAGE.
Undersized cords overheat and lose power.
Replace extension cords if they become
damaged. DO NOT use extension cords
for 220V equipment.
23. MANY
MACHINES
CAN
EJECT
THE WORKPIECE TOWARD THE
OPERATOR. Know and avoid conditions
that cause the workpiece to "kickback."
24. ALWAYS LOCK MOBILE BASES
(IF USED) BEFORE OPERATING
MACHINERY.
14. ALWAYS DISCONNECT FROM POWER
SOURCE
BEFORE
SERVICING
MACHINERY. Make sure switch is in OFF
position before reconnecting.
25. BE AWARE THAT CERTAIN DUST MAY
CAUSE AN ALLERGIC REACTION in
people and animals, especially when
exposed to fine dust. Make sure you know
what type of dust you will be exposed to
and always wear an approved respirator.
15. MAINTAIN MACHINERY WITH CARE.
Keep blades sharp and clean for best and
safest performance. Follow instructions for
lubricating and changing accessories.
16. MAKE SURE GUARDS ARE IN PLACE
AND WORK CORRECTLY BEFORE
USING MACHINERY.
17. REMOVE ADJUSTING KEYS AND
-5-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Safety Instructions for
Sandblasters
1. CORRECT ABRASIVES. Never use wet
8. MAINTAINING EQUIPMENT. Check air
abrasives in this sandblaster, it is designed
lines and fittings for any leaks, and replace
for dry abrasives only.
lines and reseal fittings immediately.
2. PROTECTING LUNGS. Make sure that you
always use an OSHA approved respirator
when using or cleaning the sandblaster.
9. SAFE SAND BLASTING. Do not use sys-
tem over the rated PSI.
10. CORRECT LIGHTING. Always make sure
that you have adequate lighting when sand-
blasting.
3. LEAVING THE AREA. Always disconnect
air supply when leaving the sandblaster.
4. PROTECTING EYES. Make sure that you
always use the dust hood when using or
cleaning the sandblaster.
11. LOADING & UNLOADING. Close the air
supply ball valve and discharge the air tank
before disconnecting the air supply line.
5. PROTECTING ENVIRONMENT. Always
sandblast in an area where the spread of
abrasive dust can be contained.
12. SAFE MAINTENANCE. Disconnect air
supply and discharge the air tank and all
lines before doing maintenance.
6. WORK AREA SAFETY. Clean compressor
and equipment air filters often, and repair
any air hose leaks immediately.
13. SAFE SANDBLASTING. Always secure
the workpiece before sandblasting.
7. MAINTAINING COMPONENTS. Replace
nozzles, hoses, lenses, and safety gear
when they become worn.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other equipment with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
There is potential danger when operating
this equipment. Accidents are frequently
caused by lack of familiarity or failure to pay
attention. Use this equipment with respect
and caution to lessen the possibility of
operator injury. If normal safety precautions
are overlooked or ignored, serious personal
injury may occur.
-6-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: SET UP
Unpacking
Set Up Safety
The Model G0474/G0475 was carefully packed
when it left our warehouse. If you discover the
equipment is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
This equipment pres-
ents serious injury haz-
ards to untrained users.
Read through this entire
manual to become famil-
iar with the controls and
operations before start-
ing the equipment!
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
Compressor
Items Needed for
Set Up
Sandblasting operations are extremely demand-
ing on some compressors and can cause a com-
pressor overload or overheated condition. Refer
to your compressor Owner's Manual and make
sure that it can handle the load of sandblasting. If
it can, you must follow these setup recommenda-
tions:
The following items are needed to complete the
set up process, but are not included with your
equipment:
Description
Qty
We recommend using a compressor that is 5 HP
and above with a minimum of a 12 CFM rating.
•
•
•
•
•
•
Phillips Screwdriver #2............................... 1
Standard Screwdriver #2............................ 1
Teflon Tape ................................................ 1
Wrench 10mm............................................ 1
Wrench 17mm............................................ 1
Wrench 22mm............................................ 1
Keep your compressor completely isolated from
your sandblasting environment, or keep the work
area downwind from the compressor. Airborne
abrasive dust will destroy rings, pistons, valves,
and bearings.
Make sure to increase the maintenance interval of
your compressor if using it in sandblasting opera-
tions.
-7-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
3. Assemble one of the remaining three ball
3
valves with a ⁄8" hose nipple, and the nozzle
arbor as shown in Figure 3.
To assemble the sandblaster:
1. Install the wheels, handles, and leg to the tank
with the screws, washers, nuts, and cotter
pins as shown in Figure 1.
4. Install one of four sand blasting nozzles into
the nozzle arbor as shown in Figure 3.
Nozzles
Ball Valve
Nozzle
Arbor
3
⁄8" Hose Nipple
Figure 3. Sand blaster handle and nozzle
assembly.
5. With the two hose clamps, secure the
sandblaster hose to the sand outlet elbow and
the sand blaster nozzle assembly as shown in
Figure 4.
Figure 1. Wheel and handle installation.
Sand Blaster Nozzle Assembly
2. Seal all pipe threads with Teflon tape, and
assemble and install one of the four ball
3
valves to the bottom of the tank with two ⁄8
"
nipples, and the sand outlet elbow as shown
in Figure 2.
Hose
Tank
Hose Clamp
Outlet Elbow
3
⁄8" Nipple
Figure 4. Sand blaster hose installation.
Ball Valve
3
⁄8" Nipple
Sand
Outlet
Elbow
Figure 2. Sand outlet control installation.
-8-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Connect the water separator assembly to the
air supply Manifold as shown in Figure 7.
6. Attach to the manifold one of the remaining
ball valves and 3⁄8" hose nipple, the red hose,
pressure gauge, and the pipe as shown in
Figure 5.
9. Now connect the gauge and water separator
assembly to the top of the tank as shown in
Figure 7.
Air Pressure Gauge
Air Supply
Manifold
Water
Separator
Assy.
Manifold
Pipe
Tank
Ball Valve
Nipple
Figure 5. Gauge/air supply control installation.
7. Install the remaining ball valve to the water
Figure 7. Air supply control system installation.
10. Connect the tank air supply hose to the sand
outlet elbow at the bottom of the tank, and the
other end to the air pressure gauge ball valve
nipple.
3
3
separator with two ⁄8" nipples, and the ⁄8
"
female nipple as shown in Figure 6.
Ball Valve
Nipple
Nipple
Female Nipple
Water separator assembly.
Figure 6.
-9-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3: OPERATIONS
Sandblasting presents a real hazard of silicosis and other lung contamination injuries! These
Injuries are permanent and can get worse over time. If you use sandblasting equipment without
the proper headgear, eye protection, and respirator, your lungs and eyes may become irreversibly
contaminated. DO NOT use this sandblaster unless you know how to use it, protect yourself
correctly, and keep all unprotected bystanders away. For latest types of protective equipment and
acceptable respirator types, contact your local OSHA or NIOSH office.
4. Move the tank air supply lever to the OFF or
Operation Safety
closed position (see Figure 8).
NOTICE
If you have never used this type of equip-
ment before, WE STRONGLY RECOMMEND
that you read books, trade magazines, or
get formal training before beginning any
projects. Regardless of the content in this
section, Grizzly Industrial will not be held
liable for accidents caused by lack of train-
ing.
Figure 8. Tank air supply valve, closed.
Basic Operation
5. Move the blast hose air supply lever to the
OFF or the closed position (see Figure 9).
The Model G0474/G0475 Sandblasters are
equipped with an industrial-duty blast nozzle,
tank, ball valves, hoses, pressure gauge, and
water separator.
To use the sandblaster:
1. PUT ON safety glasses, gloves, and
respirator. Always wear these protective
items when operating and while servicing
your sandblaster!
2. Select the appropriate sanblasting abrasive
for your sandblaster. Refer to Page 13 for
types.
Figure 9. Blast hose air supply valve, closed.
3. Install the correct nozzle into the arbor for the
abrasive type hose size, air pressure and CFM
you will use. Refer to Page 13 for options.
-10-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Point the blast nozzle in a safe direction, and
slowly move the blast nozzle lever to the ON
or open position to exhaust any air from the
tank (see Figure 10).
10. Close the blast nozzle lever, and turn the
compressor on (see Figure 11).
7. Make sure the air pressure gauge reads zero
(see Figure 10).
Figure 11. Blast nozzle valve, closed.
11. Adjust the air supply line regulator to an air
pressure between 65-125 PSI, depending on
your requirements.
Figure 10. Tank air pressure at zero PSI.
8. Remove the filler cap, insert the funnel, and
carefully—without causing a hazardous dust
cloud—pour or spade-in the abrasive into the
sandblaster. Use only enough abrasive for
your project.
12. Move the tank air supply lever to ON or the
open position (Figure 12), and the tank will
pressurize to your regulated air pressure
indicated by the tank gauge.
Note: For the Model G0475 10 gallon tank,
you can use up to 40 lbs of abrasive, or you
can fill the tank to 3⁄4 full. The Model G0474 20
gallon tank can use up to 80 lbs of abrasive,
or be filled to 3⁄4 also.
Note: If the tank relief valve trips open and
exhausts air, immediately turn the compressor
off and correct the over-pressurization
problem with the compressor. If the tank
exceeds its rated pressure, it may explode,
causing severe injury or death.
Note: If you fill the tank to 3⁄4 full, and the local
humidity is 90-100%, the water trap will not
be able to trap all of the moisture from the
compressed air. So you must reduce the load
of abrasive and fill the tank more often and
empty the water trap more often. Otherwise,
the sand will clog in the tank outlet and in the
blast hose.
9. Brush sand away from the sealing cap and
O-ring, and close the filler cap.
Figure 12. Tank air supply valve, opened.
-11-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Move the blast nozzle air supply lever to ON
or the open position (see Figure 13).
15. Point the blast nozzle at the workpiece and
slowly move the blast nozzle lever (Figure
15) to the ON or open position. Sand blasting
will begin.
Figure 13. Blast nozzle air supply valve, opened.
14. Move the sand metering valve lever to your
required sand flow volume requirement (see
Figure 14).
Figure 15. Blast nozzle valve, open.
16. Move the blast nozzle in a slow circular
motion.
Note: A good starting point for tip distance is
four inches away from the workpiece. Start
out with a low air pressure setting to avoid
excess peening and abrasive wear.
Note: Experiment with different pressures,
abrasives, sand flow, and tips to gain practical
experience.
Note: Keep the sandblasting abrasives
moisture-free; otherwise, the sand elbow and
the sand flow valve at the bottom of the tank
will clog frequently.
Figure 14. Sand metering valve in the full-open
position.
17. When sandblasting is complete, ALWAYS
closetheairsupplyleverbeforeyoudisconnect
the air supply line. Otherwise the residual air
in the tank will expel sand backwards through
the water separator and out of the air supply
fitting, damaging the water separator.
-12-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Nozzle Options
Abrasive Options
Grizzly Blasting Media Part #
Grizzly Blast Nozzles Part #
P0574002: Nozzle Set (9⁄64",1⁄8",7⁄64",3⁄32" ID).
P0574002-1: #1 Nozzle (9⁄64" ID).
P0574002-2: #2 Nozzle (1⁄8" ID).
P0574002-3: #3 Nozzle (7⁄64" ID).
P0574002-4: #4 Nozzle (3⁄32" ID).
G6535: 15 lbs. Aluminum Oxide 220 Grit.
G6536: 15 lbs. Aluminum Oxide 120 Grit.
G6537: 15 lbs. Aluminum Oxide 60 Grit.
G6538: 15 lbs. Glass Bead 50-Micron Grit.
Some common blasting abrasives are listed below.
All abrasives have benefits and drawbacks such
as quality of surface finish, abrasive life, toxicity,
and what precautions you must take to prevent
environmental damage or personal injury to your
respiratory system.
Sandblasting requires a high volume of com-
pressed air. The quality of sandblasting can be
reduced by using the incorrect combination of
nozzle, hose size, air pressure and CFM. Use the
chart below as an estimate to get you started.
Experimentation will lead you to your optimum
settings for your particular sandblasting task.
Steel Type Abrasives
This aggressive abrasive creates a rough fin-
ish that accepts paint well. The abrasive is very
durable and has a long life; however, it MUST be
kept very dry to prevent rusting.
Hose Hose Nozzle Compressor CFM at Sand Use
ID Length
3/8" 50 ft
3/8" 25 ft
1/2" 50 ft
1/2" 25 ft
ID
3/32"
7/64"
1/8"
HP
125 PSI Per-Hour
2
4
7
10
6
60 lbs
12
20
25
100 lbs
150 lbs
200 lbs
Alumina Type Abrasives
9/64"
This multi-purpose abrasive creates a smoother
finish than the steel abrasives, but has a short-
er life span. Less of the workpiece surface is
removed with this more forgiving abrasive.
Maintenance
Depressurize the sandblaster, and check
the following items each time you use the
sandblaster and replace any parts immediately
if found to be worn:
Glass and Garnet Type Abrasives
Typically this abrasive works well for soft metals
and addressing surface issues with equipment
parts where tolerances cannot be affected. The
life of this abrasive is limited and not well suited
for repetitive recycling.
•
•
•
•
Look for excessively worn or cracked noz-
zles.
Sand Type Abrasives
This abrasive is easy to find and gives an average
finish that is acceptable for most projects. Sand
has a good recycling life and is very economical.
Look for leaking thread fittings with soapy
water and a spray bottle.
Look at the sand blasting hose for thin walls
and bubbling.
Other Types of Abrasives Available
Plastic beads.
Look for worn or leaking ball valves with
soapy water and a spray bottle.
Ground walnut or peanut shells.
Ground corn cob.
Sodium bicarbonate.
Wheat starch.
-13-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Breakdown
�
�
�
��
��
�
��
��
��
��
�
��
��
��
�
��
��
��
��
��
��
��
��
��
��
��
�
��
�
��
�
�
��
��
�
�
�
�
��
��
��
-14-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts List
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
P0474001
P0474002
P0474002-1
P0474002-2
P0474002-3
P0474002-4
P0474003
P0474005
P0474008
P0474009
P0474010
P0474011
P0474014
P0474015
P0474017
P0474018
P0474019
P0474020
P0474021
NOZZLE ARBOR NUT
NOZZLE SET
23
23
24
24
25
26
27
28
29
30
30
31
32
33
34
35
36
38
P0474023
P0475023
P0474024
P0475024
P0474025
P0474026
P0474027
P0474028
P0474029
P0474030
P0475030
PN01M
LEG (G0474)
2
LEG (G0475)
2-1
2-2
2-3
2-4
3
9/64" NOZZLE
TANK 20 GALLON (G0474)
TANK 10 GALLON (G0475)
SAFETY RELIEF VALVE
SPECIAL O-RING
FILLER CAP
1/8" NOZZLE
7/64" NOZZLE
3/32" NOZZLE
GASKET
5
3/8" BALL VALVE
NOZZLE ARBOR
3/8" FEMALE CONNECTOR
WATER TRAP FILTER
PRESSURE GAUGE
AXLE
FUNNEL
8
HOOD W/LENSE
HANDLEBAR (G0474)
HANDLEBAR (G0475)
HEX NUT M6-1
9
10
11
14
15
17
18
19
20
21
PS62M
PHLP HD SCR M6-1 X 30
PIPE
AIR HOSE
P0474033
P0474034
PW06M
1/8" X 1" COTTER PIN
WHEEL
HANDLE GRIP
FLAT WASHER 12MM
MANIFOLD
1" HOSE CLAMP
1" THICK-WALLED BLAST HOSE
SAND ELBOW
P0474036
P0474038
3/8" PUSH-ON HOSE NIPPLE
-15-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY AND RETURNS
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from
the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,
negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty
and any and all warranties that may be implied by law, including any merchantability or fitness, for any par-
ticular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent
that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants.
In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and
any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.
We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special,
or consequential damages arising from the use of our products.
To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then
issue you a “Return Number,’’ which must be clearly posted on the outside as well as the inside of the
carton. We will not accept any item back without this number. Proof of purchase must accompany the
merchandise.
The manufacturers reserve the right to change specifications at any time because they constantly strive to
achieve better quality equipment. We make every effort to ensure that our products meet high quality and
durability standards and we hope you never need to use this warranty.
Please feel free to write or call us if you have any questions about the equipment or the manual.
Thank you again for your business and continued support. We hope to serve you again soon.
-16-
G0474/G0475 Sandblasters
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY CARD
Name_____________________________________________________________________________
Street_____________________________________________________________________________
City _______________________ State_________________________ Zip _____________________
Phone #____________________ Email ________________________ Invoice #_________________
Model # ____________________ Order #_______________________ Serial #__________________
The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop
better products and services. Of course, all information is strictly confidential.
1. How did you learn about us?
____ Advertisement
____ Card Deck
____ Friend
____ Website
____ Catalog
____ Other:
2. Which of the following magazines do you subscribe to?
____ Cabinet Maker
____ Family Handyman
____ Hand Loader
____ Popular Mechanics
____ Popular Science
____ Popular Woodworking
____ Practical Homeowner
____ Precision Shooter
____ Projects in Metal
____ RC Modeler
____ Today’s Homeowner
____ Wood
____ Wooden Boat
____ Woodshop News
____ Woodsmith
____ Handy
____ Home Shop Machinist
____ Journal of Light Cont.
____ Live Steam
____ Model Airplane News
____ Modeltec
____ Woodwork
____ Woodworker West
____ Woodworker’s Journal
____ Other:
____ Rifle
____ Shop Notes
____ Old House Journal
____ Shotgun News
3. What is your annual household income?
____ $20,000-$29,000
____ $30,000-$39,000
____ $40,000-$49,000
____ $70,000+
____ $50,000-$59,000
____ $60,000-$69,000
4. What is your age group?
____ 20-29
____ 30-39
____ 60-69
____ 40-49
____ 70+
____ 50-59
5. How long have you been a woodworker/metalworker?
____ 0-2 Years ____ 2-8 Years ____ 8-20 Years
____20+ Years
____10+
6. How many of your equipments or tools are Grizzly?
____ 0-2 ____ 3-5 ____ 6-9
7. Do you think your equipment represents a good value? _____Yes
8. Would you recommend Grizzly Industrial to a friend? _____Yes
_____No
_____No
9. Would you allow us to use your name as a reference for Grizzly customers in your area?
Note: We never use names more than 3 times. _____Yes _____No
10. Comments:_____________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
Download from Www.Somanuals.com. All Manuals Search And Download.
FOLD ALONG DOTTED LINE
Place
Stamp
Here
GRIZZLY INDUSTRIAL, INC.
P.O. BOX 2069
BELLINGHAM, WA 98227-2069
FOLD ALONG DOTTED LINE
Send a Grizzly Catalog to a friend:
Name_______________________________
Street_______________________________
City______________State______Zip______
TAPE ALONG EDGES--PLEASE DO NOT STAPLE
Download from Www.Somanuals.com. All Manuals Search And Download.
|