MODEL H0582
1" HEAVY–DUTY
PIN-CLUTCH
IMPACT WRENCH
INSTRUCTION SHEET
Throttle Dial
Handle
EYE/EAR INJURY HAzARD!
Wear safety glasses and
hearing protection when
using this tool!
INJURY HAzARD!
Always disconnect tool from
air to prevent unexpected
operation during service!
Forward/Reverse
Switch
DO NOT EXCEED 120 PSI!
Personal injury could
occur.
Figure 1. Model H0582
SHATTERINg HAzARD!
Use sockets rated for
impact wrench use only.
Operation
For best performance, connect your wrench to
the air supply with a 1⁄2" air line and fittings. Slide
the forward/reverse switch left or right to make
the wrench turn clockwise or counterclockwise.
Adjust the throttle dial to increase or decrease
torque.
Specifications
Drive Size..........................................................1"
Bolt Size Capacity .......................................... 13⁄4
"
No-Load Speed .................................. 3,800 RPM
Maximum Torque ................................. 1,200 ft/lb
Air Inlet Size .............................................1⁄4" NPT
Air Consumption...................................... 12 CFM
Operating Pressure ................................... 90 PSI
Maximum Operating Pressure................. 120 PSI
Weight ....................................................12.75 lbs
Maintenance
The impact wrench MuST be regularly lubricated
with 3-4 drops of air tool oil directly into the air fit-
ting before each use. For best results, we recom-
mend using an in line filter, lubricator, and regula-
tor, as shown in Figure 2.
Inventory
A. Impact Wrench ........................................... 1
B. Handle........................................................ 1
C. Nut.............................................................. 1
Quick
Connector
Quick
Connector
Lubricator
Regulator
Your
Tool
Air
Compressor
Quick
Coupler
Setup
Quick
Coupler
Secure the handle to the impact wrench with the
nut, so the assembled tool looks like Figure 1.
Air Hose
Filter
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
Figure 2. Installing your tool.
COPyRIgHT © OCTOBER, 2008 By gRIzzLy INDuSTRIAL, INC.
WARNINg: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF gRIzzLY INDUSTRIAL, INC.
#TR11306 PRINTED IN TAIWAN
Download from Www.Somanuals.com. All Manuals Search And Download.
|