MODEL G0671/G0672/G0673
DUST COLLECTOR
OWNER'S MaNUaL
G0671
4 hp 220v Single-phase
G0672
5 hp 220v Single-phase
G0673
10 hp 220/440v 3-phase
Copyright © MAy, 2008 By grizzly industriAl, inC.
WaRNiNG: NO pORTiON Of ThiS MaNUaL May bE REpRODUCED iN aNy ShapE
OR fORM WiThOUT ThE WRiTTEN appROvaL Of GRizzLy iNDUSTRiaL, iNC.
#BlJB10749 printed in tAiWAn
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
iNTRODUCTiON............................................... 2
SECTiON 5: OpERaTiONS ........................... 34
operation safety.......................................... 34
Basic Controls.............................................. 34
general ........................................................ 34
Foreword........................................................ 2
Contact info.................................................... 2
Functional overview ...................................... 2
identification................................................... 3
g0671 Machine data sheet .......................... 4
g0672 Machine data sheet .......................... 7
g0673 Machine data sheet ........................ 10
SECTiON 6: aCCESSORiES......................... 35
SECTiON 7: MaiNTENaNCE......................... 37
schedule...................................................... 37
lubrication ................................................... 37
Bag Cleaning ............................................... 37
SECTiON 1: SafETy..................................... 13
safety instructions for Machinery ................ 13
Additional safety for dust Collectors........... 15
SECTiON 8: SERviCE ................................... 38
troubleshooting ........................................... 38
SECTiON 2: CiRCUiT REQUiREMENTS ...... 16
operation ..................................................... 16
SECTiON 9: WiRiNG...................................... 40
electrical safety instructions........................ 40
g0671/g0672 Wiring diagram .................... 41
g0673 Wiring diagram ................................ 42
g0673 electrical Components..................... 43
SECTiON 3: SETUp ....................................... 17
setup safety ................................................ 17
items needed for setup............................... 17
unpacking.................................................... 17
g0671/g0672 inventory............................... 18
g0673 inventory .......................................... 19
hardware recognition Chart ....................... 20
site Considerations...................................... 21
Assembly ..................................................... 21
test run ...................................................... 25
SECTiON 10: paRTS..................................... 44
g0671 parts Breakdown.............................. 44
g0672 parts Breakdown.............................. 46
g0673 parts Breakdown.............................. 48
label placement .......................................... 50
WaRRaNTy aND RETURNS ........................ 53
SECTiON 4: DESiGNiNG ThE SySTEM....... 26
general ........................................................ 26
duct Material................................................ 26
system design............................................. 28
system grounding ....................................... 33
Download from Www.Somanuals.com. All Manuals Search And Download.
iNTRODUCTiON
functional Overview
foreword
We are proud to offer the Model g0671/g0672/
g0673 dust Collector. this machine is part of
a growing grizzly family of fine woodworking
machinery. When used according to the guide-
lines set forth in this manual, you can expect
years of trouble-free, enjoyable operation and
proof of grizzly’s commitment to customer satis-
faction.
this machine is designed to capture dust and
wood chips from multiple woodworking machines
at the same time, such as table saws, jointers,
and planers.
the primary components of this dust collector are
the motor, impeller, and lower dust collection and
upper filtration bags.
the specifications, drawings, and photographs
illustrated in this manual represent the Model
g0671/g0672/g0673 when the manual was pre-
pared. however, owing to grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of grizzly.
For your convenience, we always keep current
grizzly manuals available on our website at www.
grizzly.com. Any updates to your machine will be
reflected in these manuals as soon as they are
complete. Visit our site often to check for the lat-
est updates to this manual!
this dust collector is designed to connect to a
duct system in which each woodworking machine
is connected to a single mainline via smaller
branch lines. Alternatively, each intake port on the
collector can be connected to an individual wood-
working machine with flexible hose or rigid duct.
When the dust collector is turned on, the impel-
ler rotates, pulling air in through the intake ports
and forcing it out through the collection and filtra-
tion bags. the vacuum created draws air, dust,
and chips produced from attached woodworking
machines through the duct system to the impel-
ler housing and into the collectors. here, heavier
particles fall into the collection bags while air and
the remaining fine particles are forced into the
filter bags. these bags capture most particles
while still allowing the air to escape. to capture
smaller particles, a fine filter can be purchased
separately.
Contact info
We stand behind our machines. if you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
the dust collector should not be located near
open flames, to reduce the risk of an explosion
as a result of dust being dispersed into the air.
the dust collection system must also be properly
grounded to safely discharge static electrical build-
up and prevent the risk of fire or explosions.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pA 17756
phone: (570) 546-9663
Fax: (800) 438-5901
e-Mail: techsupport@grizzly.com
A wide variety of accessories for setting up a
stationary or mobile dust collection system are
available through grizzly.
if you have any comments regarding this manual,
please write to us at the address below:
grizzly industrial, inc.
technical documentation Manager
p.o. Box 2069
C
/
o
Bellingham, WA 98227-2069
email: manuals@grizzly.com
-2-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
identification
upper Bag hanger
Assembly
upper Bag
inlet
on/oFF power
switch
Collector
Motor
(hidden From View)
Collection Bag
Base
Caster
figure 5. Model g0673 dust collector, front view.
-3-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
MACHINE DATA
SHEET
8jhidbZgꢀHZgk^XZꢀꢁ/ꢀꢂ*,%ꢃꢀ*)+".++(ꢀ™ꢀIdꢀDgYZgꢀ8Vaa/ꢀꢂ-%%ꢃꢀ*'("),,,ꢀ™ꢀ;Vmꢀꢁ/ꢀꢂ-%%ꢃꢀ)(-"*.%&
MODEL G0671
4 HP DUST COLLECTOR
Product Dimensions:
LZ^\]iꢀꢀ###########################################################################################################################################################################(,%ꢀaWh#
,
(
&
AZc\i]$L^Yi]$=Z^\]iꢀꢀ###############################################################################################################################,(ꢀ¿-ꢄꢀmꢀ(&ꢀ¿-ꢄꢀmꢀ&%&ꢀ¿-
ꢄ
ꢄ
,
(
;ddiꢀEg^ciꢀꢂAZc\i]$L^Yi]ꢃꢀ#######################################################################################################################################,(ꢀ¿-ꢄꢀmꢀ(&ꢀ¿-
Shipping Dimensions:
IneZꢀ################################################################################################################################################# 8VgYWdVgYꢀꢅꢀLddYꢀ;gVbZ
8dciZciꢀ########################################################################################################################################################################## BVX]^cZ
LZ^\]iꢀ############################################################################################################################################################################(&*ꢀaWh#
AZc\i]$L^Yi]$=Z^\]iꢀ############################################################################################################################################'.ꢄꢀmꢀ&*ꢄꢀmꢀ)'ꢄ
Electrical:
Hl^iX]ꢀ####################################################################################################### DC$D;;ꢀBV\cZi^Xꢀl^i]ꢀI]ZgbVaꢀDkZgadVYꢀEgdiZXidg
Hl^iX]ꢀKdaiV\Zꢀ################################################################################################################################################################### ''%K
8dgYꢀAZc\i]ꢀ########################################################################################################################################################################&'ꢀ[i#
8dgYꢀ<Vj\Zꢀ#################################################################################################################################################################&'ꢀ\Vj\Z
B^c^bjbꢀ8^gXj^iꢀGZfj^gZbZciꢀ############################################################################################################################################## )%6
>cXajYZYꢀEaj\ꢀ######################################################################################################################################################################### Cd
GZXdbbZcYZYꢀEdlZgꢀ8dccZXi^dcꢀ############################################################################## =VgYl^gZYꢀl^i]ꢀHV[ZinꢀAdX`"DjiꢀHl^iX]
Motor:
IneZꢀ######################################################################################################################################### I:;8ꢀ8VeVX^idgꢀHiVgiꢀ>cYjXi^dc
=dghZedlZgꢀ#########################################################################################################################################################################)ꢀ=E
KdaiV\Zꢀ############################################################################################################################################################################### ''%K
E]VhZꢀ#################################################################################################################################################################### H^c\aZꢀE]VhZ
6behꢀ#################################################################################################################################################################################### ('6
HeZZYꢀ#########################################################################################################################################################################()*%ꢀGEB
8nXaZꢀ################################################################################################################################################################################# +%ꢀ=o
CjbWZgꢀD[ꢀHeZZYhꢀ###################################################################################################################################################################&
EdlZgꢀIgVch[Zgꢀ########################################################################################################################################################9^gZXiꢀ9g^kZ
7ZVg^c\hꢀ###############################################################################################################################H]^ZaYZYꢀVcYꢀEZgbVcZcianꢀHZVaZY
-4-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Specifications:
Operational Information
6^gꢀHjXi^dcꢀ8VeVX^inꢀ#########################################################################################################################################(**'ꢀ8;B
BVmꢀ8;Bꢀꢁ&%ꢂꢀe^eZꢃꢀ####################################################################################################################### (**'ꢀ8;Bꢀ5)#,'ꢀHE
BV^cꢀ>ciV`Zꢀ9^VbZiZgꢀ################################################################################################################################################## &%ꢂ
CjbWZgꢀd[ꢀBVc^[daYꢀEdgihꢀ###############################################################################################################################################)
BVc^[daYꢀEdgiꢀ9^VbZiZgꢀ################################################################################################################################################## )ꢂ
HdjcYꢀAZkZaꢀ############################################################################################################################################## .%ꢀY7ꢀ5ꢀ&%ꢀ[i#
Bag Information
CjbWZgꢀd[ꢀJeeZgꢀ7V\hꢀ###################################################################################################################################################'
&
JeeZgꢀ7V\ꢀ9^bZch^dchꢀ################################################################################################################################ '(*¿-ꢂꢀmꢀ),ꢀ¿)
ꢂ
JeeZgꢀ7V\ꢀBViZg^Vaꢀ#################################################################################################################################### LdkZcꢀ;VWg^X
JeeZgꢀ7V\ꢀ;^aiZgꢀ8VeVX^inꢀ##################################################################################################################(%ꢀB^XgdcꢀEVgi^XaZh
CjbWZgꢀd[ꢀ8daaZXi^dcꢀ7V\hꢀ#############################################################################################################################################'
&
8daaZXi^dcꢀ7V\ꢀ9^bZch^dchꢀ########################################################################################################################## '(*¿-ꢂꢀmꢀ),ꢀ¿)
ꢂ
8daaZXi^dcꢀ7V\ꢀBViZg^Vaꢀ############################################################################################################################## LdkZcꢀ;VWg^X
8daaZXi^dcꢀ7V\ꢀ8VeVX^inꢀ############################################################################################################################ &'ꢀXj#ꢀ[i#ꢀ:VX]
Impeller Information
IneZꢀ######################################################################################################################################################################### 8jgkZ
H^oZꢀ############################################################################################################################################################################&)&¿'
7aVYZꢀI]^X`cZhhꢀ########################################################################################################################################################### &$)
ꢂ
ꢂ
Construction Information
HiVcYꢀ#################################################################################################################################################### EgZ";dgbZYꢀHiZZa
7adlZgꢀ=djh^c\hꢀ#########################################################################################################################################;dgbZYꢀHiZZa
>ciV`ZꢀBVc^[daYꢀ############################################################################################################################################;dgbZYꢀHiZZa
>beZaaZgꢀ#####################################################################################################################################LZaYZYꢀꢄꢀ7VaVcXZYꢀHiZZa
EV^ciꢀ#############################################################################################################################################################EdlYZgꢀ8dVi
Other Specifications
>HDꢀ;VXidgnꢀ####################################################################################################################################################### >HDꢀ.%%&
8djcignꢀd[ꢀDg^\^cꢀ################################################################################################################################################### IV^lVc
LVggVcinꢀ#################################################################################################################################################################&ꢀNZVg
HZg^VaꢀCjbWZgꢀAdXVi^dcꢀ######################################################################################################>9ꢀAVWZaꢀdcꢀ;gdciꢀd[ꢀBVX]^cZ
6hhZbWanꢀI^bZꢀ#######################################################################################################################################################&ꢀ=djg
Features:
;djg"Edgiꢀ>ciV`ZꢀBVc^[daYꢀ[dgꢀ:kZcꢀ9^hig^Wji^dcꢀidꢀ8daaZXi^dcꢀ7V\h
JeeZgꢀ7V\ꢀ;^aiZgꢀ8VeVX^inꢀidꢀ(%ꢀB^XgdcꢀEVgi^XaZh
=ZVkn"9jinꢀHiVcYꢀl^i]ꢀ)ꢂꢀ8VhiZghꢀVcYꢀ7gV`Zh
HijgYnꢀ8daaZXi^dcꢀ7V\hꢀl^i]ꢀ')ꢀXj#ꢀ[i#ꢀIdiVaꢀ8VeVX^in
-5-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
MACHINE DATA
SHEET
8jhidbZgꢀHZgk^XZꢀꢁ/ꢀꢂ*,%ꢃꢀ*)+".++(ꢀ™ꢀIdꢀDgYZgꢀ8Vaa/ꢀꢂ-%%ꢃꢀ*'("),,,ꢀ™ꢀ;Vmꢀꢁ/ꢀꢂ-%%ꢃꢀ)(-"*.%&
MODEL G0671
4 HP DUST COLLECTOR
Performance Curve
)%%%
(,*%
(*%%
('*%
(%%%
',*%
'*%%
''*%
'%%%
&,*%
&*%%
&'*%
&%%%
,*%
3552
Ø235/8"
471/4"
6 5/8"
1011/8"
Ø235/8"
471/4"
*%%
'*%
%
CFM
%
&#%
'#%
(#%
)#%
*#%
+#%
,#%
-#%
.#% &%#% &&#% &'#% &(#% &)#%
STATIC PRESSURE (Inch/H2O)
5
"
47 /8
4 HP DUST COLLECTOR PERFORMANCE RESULTS
Max CFM Max SP
(**&#+ &(#*
HP
Volts
Inlet
Impeller
&)&$'
)ꢀ=E
''%K
&%ꢄ
ꢄ
3
"
31 /8
Inlet Dia. (inch)
CFM
&%ꢄ
.ꢄ
-ꢄ
,ꢄ
+ꢄ
*ꢄ
)ꢄ
(ꢄ
'ꢄ
(**&#+ ()*)#- ('-'#+ '.&+#+ '),*#) '%.-#, &)*'#. .,.#) )-)#(
Static Pressure
)#,'
)#-'
+#.-
-#*
&%#(
&&#&
&'#*( &(#'
&(#*
(Inch/H2O)
Amps
Ø10"
(%
((
'.#*
('#&
',#*
(%#*
')
'&
'(
&+#-
&.#*
&'#*
&(#*
&&
-#+
)#*
Air Speed (m/s)
',#&
.#&
737/8"
IZhiꢀgjcꢀjh^c\ꢀ(%ꢀb^XgdcꢀjeeZgꢀVcYꢀadlZgꢀWV\#
-6-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
MACHINE DATA
SHEET
8jhidbZgꢀHZgk^XZꢀꢁ/ꢀꢂ*,%ꢃꢀ*)+".++(ꢀ™ꢀIdꢀDgYZgꢀ8Vaa/ꢀꢂ-%%ꢃꢀ*'("),,,ꢀ™ꢀ;Vmꢀꢁ/ꢀꢂ-%%ꢃꢀ)(-"*.%&
MODEL G0672
5 HP DUST COLLECTOR
Product Dimensions:
LZ^\]iꢀꢀ###########################################################################################################################################################################'-+ꢀaWh#
,
(
AZc\i]$L^Yi]$=Z^\]iꢀꢀ##################################################################################################################################,(ꢀ¿-ꢄꢀmꢀ(&ꢀ¿-ꢄꢀmꢀ&()ꢄ
,
(
;ddiꢀEg^ciꢀꢂAZc\i]$L^Yi]ꢃꢀ#######################################################################################################################################,(ꢀ¿-ꢄꢀmꢀ(&ꢀ¿-
ꢄ
Shipping Dimensions:
IneZꢀ################################################################################################################################################# 8VgYWdVgYꢀꢅꢀLddYꢀ;gVbZ
8dciZciꢀ########################################################################################################################################################################## BVX]^cZ
LZ^\]iꢀ############################################################################################################################################################################((-ꢀaWh#
AZc\i]$L^Yi]$=Z^\]iꢀ############################################################################################################################################'.ꢄꢀmꢀ'+ꢄꢀmꢀ)'ꢄ
Electrical:
Hl^iX]ꢀ####################################################################################################### DC$D;;ꢀBV\cZi^Xꢀl^i]ꢀI]ZgbVaꢀDkZgadVYꢀEgdiZXidg
Hl^iX]ꢀKdaiV\Zꢀ################################################################################################################################################################### ''%K
8dgYꢀAZc\i]ꢀ########################################################################################################################################################################&'ꢀ[i#
8dgYꢀ<Vj\Zꢀ#################################################################################################################################################################&%ꢀ\Vj\Z
B^c^bjbꢀ8^gXj^iꢀGZfj^gZbZciꢀ############################################################################################################################################## *%6
>cXajYZYꢀEaj\ꢀ######################################################################################################################################################################### Cd
GZXdbbZcYZYꢀEdlZgꢀ8dccZXi^dcꢀ############################################################################## =VgYl^gZYꢀl^i]ꢀHV[ZinꢀAdX`"DjiꢀHl^iX]
Motor:
IneZꢀ######################################################################################################################################### I:;8ꢀ8VeVX^idgꢀHiVgiꢀ>cYjXi^dc
=dghZedlZgꢀ#########################################################################################################################################################################*ꢀ=E
KdaiV\Zꢀ############################################################################################################################################################################### ''%K
E]VhZꢀ#################################################################################################################################################################### H^c\aZꢀE]VhZ
6behꢀ#################################################################################################################################################################################### ()6
HeZZYꢀ#########################################################################################################################################################################()*%ꢀGEB
8nXaZꢀ################################################################################################################################################################################# +%ꢀ=o
CjbWZgꢀD[ꢀHeZZYhꢀ###################################################################################################################################################################&
EdlZgꢀIgVch[Zgꢀ########################################################################################################################################################9^gZXiꢀ9g^kZ
7ZVg^c\hꢀ###############################################################################################################################H]^ZaYZYꢀVcYꢀEZgbVcZcianꢀHZVaZY
-7-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Specifications:
Operational Information
6^gꢀHjXi^dcꢀ8VeVX^inꢀ#########################################################################################################################################(.+&ꢀ8;B
BVmꢀ8;Bꢀꢁ&%ꢂꢀE^eZꢃꢀ####################################################################################################################### (.+&ꢀ8;Bꢀ5*#(+ꢀHE
BV^cꢀ>ciV`Zꢀ9^VbZiZgꢀ################################################################################################################################################## &%ꢂ
CjbWZgꢀd[ꢀBVc^[daYꢀEdgihꢀ###############################################################################################################################################)
BVc^[daYꢀEdgiꢀ9^VbZiZgꢀ################################################################################################################################################## )ꢂ
HdjcYꢀAZkZaꢀ############################################################################################################################################## .%ꢀY7ꢀ5ꢀ&%ꢀ[i#
Bag Information
CjbWZgꢀd[ꢀJeeZgꢀ7V\hꢀ###################################################################################################################################################'
JeeZgꢀ7V\ꢀ9^bZch^dchꢀ################################################################################################################################### '(*¿-ꢂꢀmꢀ,%ꢂ
JeeZgꢀ7V\ꢀBViZg^Vaꢀ#################################################################################################################################EdanZhiZgꢀ;VWg^X
JeeZgꢀ7V\ꢀ;^aiZgꢀ8VeVX^inꢀ#################################################################################################################'#*ꢀB^XgdcꢀEVgi^XaZh
CjbWZgꢀd[ꢀ8daaZXi^dcꢀ7V\hꢀ#############################################################################################################################################'
8daaZXi^dcꢀ7V\ꢀ9^bZch^dchꢀ############################################################################################################################# '(*¿-ꢂꢀmꢀ*,ꢂ
8daaZXi^dcꢀ7V\ꢀBViZg^Vaꢀ###################################################################################################################### =ZVkn"9jinꢀEaVhi^X
8daaZXi^dcꢀ7V\ꢀ8VeVX^inꢀ############################################################################################################################ &'ꢀXj#ꢀ[i#ꢀ:VX]
Impeller Information
IneZꢀ######################################################################################################################################################################### 8jgkZ
H^oZꢀ############################################################################################################################################################################## &*ꢂ
7aVYZꢀI]^X`cZhhꢀ############################################################################################################################################################&¿)
ꢂ
Construction Information
HiVcYꢀ#################################################################################################################################################### EgZ";dgbZYꢀHiZZa
7adlZgꢀ=djh^c\hꢀ#########################################################################################################################################;dgbZYꢀHiZZa
>ciV`ZꢀBVc^[daYꢀ############################################################################################################################################;dgbZYꢀHiZZa
>beZaaZgꢀ#####################################################################################################################################LZaYZYꢀꢄꢀ7VaVcXZYꢀHiZZa
EV^ciꢀ#############################################################################################################################################################EdlYZgꢀ8dVi
Other Specifications
>HDꢀ;VXidgnꢀ####################################################################################################################################################### >HDꢀ.%%&
8djcignꢀd[ꢀDg^\^cꢀ################################################################################################################################################### IV^lVc
LVggVcinꢀ#################################################################################################################################################################&ꢀNZVg
HZg^VaꢀCjbWZgꢀAdXVi^dcꢀ######################################################################################################>9ꢀAVWZaꢀdcꢀ;gdciꢀd[ꢀBVX]^cZ
6hhZbWanꢀI^bZꢀ#######################################################################################################################################################&ꢀ=djg
Features:
;djg"Edgiꢀ>ciV`ZꢀBVc^[daYꢀ[dgꢀ:kZcꢀ9^hig^Wji^dcꢀidꢀ8daaZXi^dcꢀ7V\h
JeeZgꢀ7V\ꢀ;^aiZgꢀ8VeVX^inꢀidꢀ'#*ꢀB^XgdcꢀEVgi^XaZh
=ZVkn"9jinꢀHiVcYꢀl^i]ꢀ)ꢂꢀ8VhiZghꢀVcYꢀ7gV`Zh
HijgYnꢀ8daaZXi^dcꢀ7V\hꢀl^i]ꢀ')ꢀXj#ꢀ[i#ꢀIdiVaꢀ8VeVX^in
-8-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
MACHINE DATA
SHEET
8jhidbZgꢀHZgk^XZꢀꢁ/ꢀꢂ*,%ꢃꢀ*)+".++(ꢀ™ꢀIdꢀDgYZgꢀ8Vaa/ꢀꢂ-%%ꢃꢀ*'("),,,ꢀ™ꢀ;Vmꢀꢁ/ꢀꢂ-%%ꢃꢀ)(-"*.%&
MODEL G0672
5 HP DUST COLLECTOR
Performance Curve
)*%%
)'*%
)%%%
(,*%
(*%%
('*%
(%%%
',*%
'*%%
''*%
'%%%
&,*%
&*%%
&'*%
&%%%
,*%
3961
Ø235/8"
70"
134"
6 5/8"
Ø235/8"
57"
*%%
'*%
%
%
&#%
'#%
(#%
)#%
*#%
+#%
,#%
-#%
.#% &%#% &&#% &'#% &(#% &)#% &*#%
CFM
STATIC PRESSURE (Inch/H2O)
5 HP DUST COLLECTOR PERFORMANCE RESULTS
5
"
47 /8
Max CFM Max SP
(.+%#+ &)#+
HP
Volts
Inlet
Impeller
*=E
''%K
&%ꢄ
&*ꢄ
Inlet Dia. (inch)
CFM
&%ꢄ
.ꢄ
-ꢄ
,ꢄ
+ꢄ
*ꢄ
)ꢄ
(ꢄ
'ꢄ
(.+%#+ (-%.#. (((+#) ',))#) ''%+#( &*+%#+ &&)%#- -+&#% +*+#*
3
"
31 /8
Static Pressure
*#(+
*#+
,#'
.#+)
&&#)
&(#%) &(#-) &)#%- &)#+
(Inch/H2O)
Amps
((#'
(+#-
('#*
(*#)
(%
(&
'*#*
'*#*
'&#,
'%#*
&,#)
&)#*
&(#*
&%#+
&%#,
-
.#*
+#&
Ø10"
Air Speed (m/s)
737/8"
IZhiꢀgjcꢀjh^c\ꢀ'#*ꢀb^XgdcꢀjeeZgꢀWV\ꢀVcYꢀeaVhi^XꢀadlZgꢀXdaaZXi^dcꢀWV\#ꢀ
BVmꢀVbeꢀYgVlꢀV[iZgꢀVYY^c\ꢀ&%ꢄꢀmꢀ)ꢄꢀmꢀ)ꢀ^caZi/ꢀ(%#(6#
-9-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
MACHINE DATA
SHEET
8jhidbZgꢀHZgk^XZꢀꢁ/ꢀꢂ*,%ꢃꢀ*)+".++(ꢀ™ꢀIdꢀDgYZgꢀ8Vaa/ꢀꢂ-%%ꢃꢀ*'("),,,ꢀ™ꢀ;Vmꢀꢁ/ꢀꢂ-%%ꢃꢀ)(-"*.%&
MODEL G0673
10 HP INDUSTRIAL DUST COLLECTOR
Product Dimensions:
LZ^\]iꢀꢀ###########################################################################################################################################################################)&%ꢀaWh#
(
(
&
AZc\i]$L^Yi]$=Z^\]iꢀꢀ###############################################################################################################################-%ꢀ¿-ꢄꢀmꢀ-%ꢀ¿-ꢄꢀmꢀ&(*ꢀ¿'
ꢄ
ꢄ
(
(
;ddiꢀEg^ciꢀꢂAZc\i]$L^Yi]ꢃꢀ#######################################################################################################################################-%ꢀ¿-ꢄꢀmꢀ-%ꢀ¿-
Shipping Dimensions:
IneZꢀ################################################################################################################################################# 8VgYWdVgYꢀꢅꢀLddYꢀ;gVbZ
8dciZciꢀ########################################################################################################################################################################## BVX]^cZ
LZ^\]iꢀ############################################################################################################################################################################*%+ꢀaWh#
AZc\i]$L^Yi]$=Z^\]iꢀ############################################################################################################################################),ꢄꢀmꢀ*(ꢄꢀmꢀ(&ꢄ
Electrical:
Hl^iX]ꢀ####################################################################################################### DC$D;;ꢀBV\cZi^Xꢀl^i]ꢀI]ZgbVaꢀDkZgadVYꢀEgdiZXidg
Hl^iX]ꢀKdaiV\Zꢀ################################################################################################################################################################### ''%K
8dgYꢀAZc\i]ꢀ########################################################################################################################################################################&'ꢀ[i#
8dgYꢀ<Vj\Zꢀ#################################################################################################################################################################&%ꢀ\Vj\Z
B^c^bjbꢀ8^gXj^iꢀGZfj^gZbZciꢀ############################################################################################################################################## )%6
>cXajYZYꢀEaj\ꢀ######################################################################################################################################################################### Cd
GZXdbbZcYZYꢀEdlZgꢀ8dccZXi^dcꢀ############################################################################## =VgYl^gZYꢀl^i]ꢀHV[ZinꢀAdX`"DjiꢀHl^iX]
8dckZgh^dcꢀidꢀ))%Kꢀ#########################################################################################################################################################<-'.+
E]VhZꢀ8dckZgiZgꢀ##############################################################################################################################################################<,.,.
Motor:
IneZꢀ######################################################################################################################################### I:;8ꢀ8VeVX^idgꢀHiVgiꢀ>cYjXi^dc
=dghZedlZgꢀ#######################################################################################################################################################################&%ꢀ=E
KdaiV\Zꢀ######################################################################################################################################################################''%K$))%K
EgZl^gZYꢀ############################################################################################################################################################################# ''%K
E]VhZꢀ############################################################################################################################################################################ (ꢀE]VhZ
6behꢀ#############################################################################################################################################################################(%6$&*6
HeZZYꢀ#########################################################################################################################################################################()*%ꢀGEB
8nXaZꢀ################################################################################################################################################################################# +%ꢀ=o
CjbWZgꢀD[ꢀHeZZYhꢀ###################################################################################################################################################################&
EdlZgꢀIgVch[Zgꢀ########################################################################################################################################################9^gZXiꢀ9g^kZ
7ZVg^c\hꢀ###############################################################################################################################H]^ZaYZYꢀVcYꢀEZgbVcZcianꢀHZVaZY
-10-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Specifications:
Operational Information
6^gꢀHjXi^dcꢀ8VeVX^inꢀ#########################################################################################################################################*(+%ꢀ8;B
BVmꢀ8;Bꢀꢁ&%ꢂꢀE^eZꢃꢀ##################################################################################################################### *(+%ꢀ8;Bꢀ5&%#%-ꢀHE
BV^cꢀ>ciV`Zꢀ9^VbZiZgꢀ################################################################################################################################################## &%ꢂ
CjbWZgꢀd[ꢀBVc^[daYꢀEdgihꢀ###############################################################################################################################################*
BVc^[daYꢀEdgiꢀ9^VbZiZgꢀ################################################################################################################################################## )ꢂ
HdjcYꢀAZkZaꢀ#############################################################################################################################################.'#*ꢀYWꢀ5ꢀ&%[i#
Bag Information
CjbWZgꢀd[ꢀJeeZgꢀ7V\hꢀ###################################################################################################################################################)
JeeZgꢀ7V\ꢀ9^bZch^dchꢀ################################################################################################################################### '(*¿-ꢂꢀmꢀ,%ꢂ
JeeZgꢀ7V\ꢀBViZg^Vaꢀ#################################################################################################################################### LdkZcꢀ;VWg^X
JeeZgꢀ7V\ꢀ;^aiZgꢀ8VeVX^inꢀ#################################################################################################################'#*ꢀB^XgdcꢀEVgi^XaZh
CjbWZgꢀd[ꢀ8daaZXi^dcꢀ7V\hꢀ#############################################################################################################################################)
8daaZXi^dcꢀ7V\ꢀ9^bZch^dchꢀ############################################################################################################################# '(*¿-ꢂꢀmꢀ*,ꢂ
8daaZXi^dcꢀ7V\ꢀBViZg^Vaꢀ########################################################################################################################################## EaVhi^X
8daaZXi^dcꢀ7V\ꢀ8VeVX^inꢀ############################################################################################################################ &'ꢀXj#ꢀ[i#ꢀ:VX]
Impeller Information
IneZꢀ################################################################################################################################################## 7VaVcXZYꢀGVY^Vaꢀ;^c
H^oZꢀ############################################################################################################################################################################## &,ꢂ
7aVYZꢀI]^X`cZhhꢀ############################################################################################################################################################&¿)
ꢂ
Construction Information
HiVcYꢀ#################################################################################################################################################### EgZ";dgbZYꢀHiZZa
7adlZgꢀ=djh^c\hꢀ#########################################################################################################################################;dgbZYꢀHiZZa
>ciV`ZꢀBVc^[daYꢀ############################################################################################################################################;dgbZYꢀHiZZa
>beZaaZgꢀ#####################################################################################################################################LZaYZYꢀꢄꢀ7VaVcXZYꢀHiZZa
EV^ciꢀ#############################################################################################################################################################EdlYZgꢀ8dVi
Other Specifications
>HDꢀ;VXidgnꢀ####################################################################################################################################################### >HDꢀ.%%&
8djcignꢀd[ꢀDg^\^cꢀ################################################################################################################################################### IV^lVc
LVggVcinꢀ#################################################################################################################################################################&ꢀNZVg
HZg^VaꢀCjbWZgꢀAdXVi^dcꢀ######################################################################################################>9ꢀAVWZaꢀdcꢀ;gdciꢀd[ꢀBVX]^cZ
6hhZbWanꢀI^bZꢀ####################################################################################################################################################&&¿'ꢀ=djg
Features:
;^kZ"Edgiꢀ>ciV`ZꢀBVc^[daYꢀ[dgꢀ:kZcꢀ9^hig^Wji^dcꢀidꢀ8daaZXi^dcꢀ7V\h
JeeZgꢀ7V\ꢀ;^aiZgꢀ8VeVX^inꢀidꢀ'#*ꢀB^XgdcꢀEVgi^XaZh
=ZVkn"9jinꢀHiVcYꢀl^i]ꢀ)ꢂꢀ8VhiZghꢀVcYꢀ7gV`Zh
HijgYnꢀ8daaZXi^dcꢀ7V\hꢀl^i]ꢀ)-ꢀXj#ꢀ[i#ꢀIdiVaꢀ8VeVX^in
-11-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
MACHINE DATA
SHEET
8jhidbZgꢀHZgk^XZꢀꢁ/ꢀꢂ*,%ꢃꢀ*)+".++(ꢀ™ꢀIdꢀDgYZgꢀ8Vaa/ꢀꢂ-%%ꢃꢀ*'("),,,ꢀ™ꢀ;Vmꢀꢁ/ꢀꢂ-%%ꢃꢀ)(-"*.%&
MODEL G0673
10 HP DUST COLLECTOR
Performance Curve
**%%
*'*%
*%%%
),*%
)*%%
)'*%
)%%%
(,*%
(*%%
('*%
(%%%
',*%
'*%%
''*%
'%%%
&,*%
&*%%
&'*%
&%%%
,*%
5359.7
Ø235/8"
70"
81/2"
1351/2"
Ø235/8"
"
57
1
"
*%%
55 /2
'*%
%
%
&#%
'#%
(#%
)#%
*#%
+#%
,#%
-#%
.#% &%#% &&#% &'#% &(#% &)#% &*#% &+#% &,#% &-#% &.#%
CFM
STATIC PRESSURE (Inch/H2O)
Ø10"
5
"
60 /8
10 HP DUST COLLECTOR PERFORMANCE RESULTS
3
"
Max CFM Max SP
*(*.#, &,#.
HP
Volts
Inlet
Impeller
80 /8
&%=E
''%K
&%ꢄ
&,ꢄ
Inlet Dia. (inch)
CFM
&%ꢄ
.ꢄ
-ꢄ
,ꢄ
+ꢄ
*ꢄ
)ꢄ
(ꢄ
'ꢄ
*(*.#, *&,+#- )''.#, ((.%#' '+%)#* &+,-#. .+-#+ )(%#* ())#)
Static Pressure
&%#%-
&%#+) &'#.+ &)#,' &+#%- &,#+- &,#,' &,#-
&,#.
(Inch/H2O)
Amps
3
"
80 /8
('#+
).#-
('#&
)-#&
(%
'+#+
(&#*
'(#&
')#'
&-#,
&*#+
&*#)
.
&(#&
)
&'
Air Speed (m/s)
(.#(
(#'
IZhiꢀgjcꢀjh^c\ꢀ'#*ꢀb^XgdcꢀjeeZgꢀWV\ꢀVcYꢀeaVhi^XꢀadlZgꢀXdaaZXi^dcꢀWV\#ꢀ
BVmꢀVbeꢀYgVlꢀV[iZgꢀVYY^c\ꢀ&%ꢄꢀmꢀ)ꢄꢀmꢀ*ꢀ^caZi/ꢀ(%#*6#
-12-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
3%#4)/. ꢄꢈ 3!&%49
&OR 9OUR /WN 3AFETYꢇ 2EAD )NSTRUCTION
-ANUAL "EFORE /PERATING THIS -ACHINE
4HE PURPOSE OF SAFETY SYMBOLS IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDOUS CONDITIONSꢁ 4HIS
MANUAL USES A SERIES OF SYMBOLS AND SIGNAL WORDS INTENDED TO CONVEY THE LEVEL OF IMPORTANCE
OF THE SAFETY MESSAGESꢁ 4HE PROGRESSION OF SYMBOLS IS DESCRIBED BELOWꢁ 2EMEMBER THAT SAFETY
MESSAGES BY THEMSELVES DO NOT ELIMINATE DANGER AND ARE NOT A SUBSTITUTE FOR PROPER ACCIDENT
PREVENTION MEASURESꢁ
)NDICATES AN IMMINENTLY HAZARDOUS SITUATION WHICHꢇ IF NOT AVOIDEDꢇ
7),, RESULT IN DEATH OR SERIOUS INJURYꢁ
)NDICATES A POTENTIALLY HAZARDOUS SITUATION WHICHꢇ IF NOT AVOIDEDꢇ
#/5,$ RESULT IN DEATH OR SERIOUS INJURYꢁ
)NDICATES A POTENTIALLY HAZARDOUS SITUATION WHICHꢇ IF NOT AVOIDEDꢇ
-!9 RESULT IN MINOR OR MODERATE INJURYꢁ )T MAY ALSO BE USED TO ALERT
AGAINST UNSAFE PRACTICESꢁ
4HIS SYMBOL IS USED TO ALERT THE USER TO USEFUL INFORMATION ABOUT
PROPER OPERATION OF THE MACHINEꢁ
./4)#%
Safety instructions for Machinery
3AFETY )NSTRUCTIONS FOR -ACHINERY
ꢄꢁ 2%!$ 4(% %.4)2% -!.5!, "%&/2%
34!24).' -!#().%29ꢁ BVX]^cZgnꢀegZh"
Zcihꢀ hZg^djhꢀ ^c_jgnꢀ ]VoVgYhꢀ idꢀ jcigV^cZYꢀ
jhZgh#ꢀ
ꢀꢁ !,7!93 53% (%!2).' 02/4%#4)/.
7(%. /0%2!4).' -!#().%29ꢁꢀ
BVX]^cZgnꢀ cd^hZꢀ XVcꢀ XVjhZꢀ eZgbVcZciꢀ
]ZVg^c\ꢀadhh#ꢀ
ꢂꢁ 7%!2 02/0%2 !00!2%,ꢁꢀ 9Dꢀ CDIꢀ
lZVgꢀaddhZꢀXadi]^c\!ꢀ\adkZh!ꢀcZX`i^Zh!ꢀg^c\h!ꢀ
dgꢀ_ZlZagnꢀi]ViꢀXVcꢀXViX]ꢀ^cꢀbdk^c\ꢀeVgih#ꢀ
LZVgꢀ egdiZXi^kZꢀ ]V^gꢀ XdkZg^c\ꢀ idꢀ XdciV^cꢀ
adc\ꢀ]V^gꢀVcYꢀlZVgꢀcdc"ha^eꢀ[ddilZVg#
ꢅꢁ !,7!93 53% !.3) !002/6%$
3!&%49 ',!33%3 7(%. /0%2!4).'
-!#().%29ꢁ :kZgnYVnꢀ ZnZ\aVhhZhꢀ dcanꢀ
]VkZꢀ ^beVXiꢀ gZh^hiVciꢀ aZchZh·i]Znꢀ VgZꢀ
CDIꢀhV[Zinꢀ\aVhhZh#
ꢃꢁ .%6%2 /0%2!4% -!#().%29 7(%.
4)2%$ /2 5.$%2 4(% ).&,5%.#% /&
$25'3 /2 !,#/(/,ꢁ 7ZꢀbZciVaanꢀVaZgiꢀ
ViꢀVaaꢀi^bZhꢀl]Zcꢀgjcc^c\ꢀbVX]^cZgn#
ꢆꢁ !,7!93 7%!2 ! .)/3( !002/6%$
2%30)2!4/2 7(%. /0%2!4).'
-!#().%29 4(!4 02/$5#%3 $534ꢁꢀ
BdhiꢀineZhꢀd[ꢀYjhiꢀꢁlddY!ꢀbZiVa!ꢀZiX#ꢂꢀXVcꢀ
XVjhZꢀhZkZgZꢀgZhe^gVidgnꢀ^aacZhhZh#
-13-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
3AFETY )NSTRUCTIONS FOR -ACHINERY
ꢀꢁ /.,9 !,,/7 42!).%$ !.$ 02/0ꢂ
ꢅꢀꢁ 2%-/6% !$*534).' +%93 !.$
%2,9 350%26)3%$ 0%23/..%, 4/
/0%2!4% -!#().%29ꢁꢀ BV`Zꢀ hjgZꢀ
deZgVi^dcꢀ^chigjXi^dchꢀVgZꢀhV[ZꢀVcYꢀXaZVganꢀ
jcYZghiddY#
72%.#(%3ꢁꢀBV`ZꢀVꢀ]VW^iꢀd[ꢀX]ZX`^c\ꢀ[dgꢀ
`ZnhꢀVcYꢀVY_jhi^c\ꢀlgZcX]ZhꢀWZ[dgZꢀijgc"
^c\ꢀbVX]^cZgnꢀ/.#
ꢅꢃꢁ #(%#+ &/2 $!-!'%$ 0!243
"%&/2% 53).' -!#().%29ꢁꢀ8]ZX`ꢀ[dgꢀ
W^cY^c\ꢀdgꢀb^hVa^\cZYꢀeVgih!ꢀWgd`ZcꢀeVgih!ꢀ
addhZꢀWdaih!ꢀVcYꢀVcnꢀdi]ZgꢀXdcY^i^dchꢀi]Viꢀ
bVnꢀ^beV^gꢀbVX]^cZꢀdeZgVi^dc#ꢀGZeV^gꢀdgꢀ
gZeaVXZꢀYVbV\ZYꢀeVgihꢀWZ[dgZꢀdeZgVi^dc#
ꢃꢁ +%%0 #(),$2%. !.$ 6)3)4/23 !7!9ꢁ
@ZZeꢀ Vaaꢀ X]^aYgZcꢀ VcYꢀ k^h^idghꢀ Vꢀ hV[Zꢀ Y^h"
iVcXZꢀ[gdbꢀi]Zꢀldg`ꢀVgZV#
ꢄꢁ -!+% 7/2+3(/0 #(),$02//&ꢁꢀJhZꢀ
eVYadX`h!ꢀ bVhiZgꢀ hl^iX]Zh!ꢀ VcYꢀ gZbdkZꢀ
hiVgiꢀhl^iX]ꢀ`Znh#
ꢅꢄꢁ 53% 2%#/--%.$%$ !##%33/2)%3ꢁꢀ
GZ[Zgꢀidꢀi]Zꢀ^chigjXi^dcꢀbVcjVaꢀ[dgꢀgZXdb"
bZcYZYꢀ VXXZhhdg^Zh#ꢀ >begdeZgꢀ VXXZhhd"
g^Zhꢀ^cXgZVhZꢀg^h`ꢀd[ꢀ^c_jgn#
ꢅꢆꢁ .%6%2 ,%!6% 7(%. -!#().% )3
25..).'ꢁ IjgcꢀedlZgꢀ/&&ꢀVcYꢀVaadlꢀVaaꢀ
bdk^c\ꢀeVgihꢀidꢀXdbZꢀidꢀVꢀXdbeaZiZꢀhideꢀ
WZ[dgZꢀaZVk^c\ꢀbVX]^cZꢀjcViiZcYZY#
ꢇꢆꢁ $/ ./4 &/2#% -!#().%29ꢁꢀ Ldg`ꢀ Viꢀ
i]ZꢀheZZYꢀ[dgꢀl]^X]ꢀi]ZꢀbVX]^cZꢀdgꢀVXXZh"
hdgnꢀlVhꢀYZh^\cZY#
ꢅꢅꢁ $/ ./4 53% ). $!.'%2/53
%.6)2/.-%.43ꢁ 9Dꢀ CDIꢀ jhZꢀ bVX]^c"
Zgnꢀ^cꢀYVbe!ꢀlZiꢀadXVi^dch!ꢀdgꢀl]ZgZꢀVcnꢀ
[aVbbVWaZꢀdgꢀcdm^djhꢀ[jbZhꢀbVnꢀZm^hi#ꢀ
ꢇꢅꢁ 3%#52% 7/2+0)%#%ꢁꢀ JhZꢀ XaVbehꢀ dgꢀ
Vꢀk^hZꢀidꢀ]daYꢀi]Zꢀldg`e^ZXZꢀl]ZcꢀegVXi^"
XVa#ꢀ 6ꢀ hZXjgZYꢀ ldg`e^ZXZꢀ egdiZXihꢀ ndjgꢀ
]VcYhꢀVcYꢀ[gZZhꢀWdi]ꢀ]VcYhꢀidꢀdeZgViZꢀi]Zꢀ
bVX]^cZ#
ꢅꢇꢁ +%%0 7/2+ !2%! #,%!. !.$ 7%,,
,)'(4%$ꢁ 8ajiiZgꢀVcYꢀYVg`ꢀh]VYdlhꢀbVnꢀ
XVjhZꢀVXX^YZcih#
ꢇꢇꢁ $/ ./4 /6%22%!#(ꢁꢀBV^ciV^cꢀhiVW^a^inꢀ
VcYꢀWVaVcXZꢀViꢀVaaꢀi^bZh#
ꢅꢈꢁ 53% ! '2/5.$%$ %84%.3)/. #/2$
2!4%$&/24(%-!#().%!-0%2!'%ꢁ
<gdjcYZYꢀXdgYhꢀb^c^b^oZꢀh]dX`ꢀ]VoVgYh#
JcYZgh^oZYꢀ XdgYhꢀ XgZViZꢀ ZmXZhh^kZꢀ ]ZVi#ꢀ
6alVnhꢀgZeaVXZꢀYVbV\ZYꢀZmiZch^dcꢀXdgYh#
ꢇꢈꢁ -!.9
-!#().%3
#!.
%*%#4
7/2+0)%#%3 4/7!2$ /0%2!4/2ꢁ
@cdlꢀVcYꢀVkd^YꢀXdcY^i^dchꢀi]ViꢀXVjhZꢀi]Zꢀ
ldg`e^ZXZꢀidꢀꢁ`^X`WVX`#ꢁ
ꢅꢉꢁ !,7!93 $)3#/..%#4 &2/- 0/7%2
ꢇꢉꢁ !,7!93 ,/#+ -/"),% "!3%3
3/52#%
"%&/2%
3%26)#).'
ꢌ)& 53%$
"%&/2% /0%2!4).'
-!#().%29#ꢀBV`ZꢀhjgZꢀhl^iX]ꢀ^hꢀ^cꢀD;;
ꢀ
-!#().%29#
edh^i^dcꢀWZ[dgZꢀgZXdccZXi^c\#
ꢇꢊꢁ #%24!). $534 -!9 "% (!:!2$/53ꢀ
idꢀ i]Zꢀ gZhe^gVidgnꢀ hnhiZbhꢀ d[ꢀ eZdeaZꢀ VcYꢀ
Vc^bVah!ꢀZheZX^Vaanꢀ[^cZꢀYjhi#ꢀ7ZꢀVlVgZꢀd[ꢀ
i]Zꢀ ineZꢀ d[ꢀ Yjhiꢀ ndjꢀ VgZꢀ ZmedhZYꢀ idꢀ VcYꢀ
ValVnhꢀlZVgꢀVꢀgZhe^gVidgꢀYZh^\cZYꢀidꢀ[^aiZgꢀ
i]ViꢀineZꢀd[ꢀYjhi#
ꢅꢊꢁ -!).4!). -!#().%29 7)4( #!2%ꢁꢀ
@ZZeꢀWaVYZhꢀh]VgeꢀVcYꢀXaZVcꢀ[dgꢀWZhiꢀVcYꢀ
hV[ZhiꢀeZg[dgbVcXZ#ꢀ;daadlꢀ^chigjXi^dchꢀ[dgꢀ
ajWg^XVi^c\ꢀVcYꢀX]Vc\^c\ꢀVXXZhhdg^Zh#
ꢅꢋꢁ -!+% 352% '5!2$3 !2% ). 0,!#%
!.$ 7/2+ #/22%#4,9 "%&/2%
53).' -!#().%29ꢁ
-14-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
additional Safety for Dust Collectors
1. MaChiNE USE. this machine only is
intended to collect wood dust/chips from
woodworking machines. do not use this
dust collector as a vacuum. do not use
this dust collector with machines producing
dust/chips from metal, asbestos products,
lead paint, silica or any products that are
not natural wood or man-made wood prod-
ucts such as plywood or particle board.
6. avOiDiNG fiRES. do not allow steel to
strike against the impeller—this may pro-
duce a spark. sparks can smolder in wood
dust for a long time before fire or flame is
detected. if you accidentally collect metal
during operation, immediately turn off the
dust collector, unplug the power cord from
the outlet or flip the disconnect switch and
wait for all moving parts to stop. remove
collection bags and empty the dust into an
approved air tight metal container. prevent
any chance of accidentally collecting metal
again before resuming operations.
2. WEaR RESpiRaTOR. this machine may
blow fine dust particles into the air dur-
ing operation. Always wear an approved
respirator during and for a short time after
machine operation!
7. KEEpiNG fiNGERS SafE. do not place
your hands or tools near the open inlet dur-
ing operation for any reason. the powerful
suction could cause accidental contact with
the impeller which will cause serious per-
sonal injury or damage to the machine.
3. SUSpENDED DUST paRTiCLES aND
iGNiTiON SOURCES. do not operate the
dust collector in areas where explosion
risks would be high if dust were dispersed
into the area. Areas of high risk include, but
are not limited to, areas near pilot lights or
open flames.
8. OpERaTiONaL QUESTiONS. if at any
time you are experiencing difficulties
performing the intended operation, stop
using the machine! then contact our tech
support or ask a qualified expert how the
operation should be performed.
4. EMpTyiNG DUST. When emptying dust
from the collection bags or drum, wear a
respirator and safety glasses. empty dust
into an approved container and dispose of
properly.
9. DUST hazaRD. Be aware that certain
woods may cause an allergic reaction
in people and animals, especially when
exposed to fine dust. Make sure you know
what type of wood dust you will be exposed
to in case there is a possibility of an allergic
reaction.
5. SafE SERviCiNG. disconnect power and
allow impeller to completely stop before
servicing or working on the dust collector
or the ducting system, especially if clearing
a clogged duct.
No list of safety guidelines can be complete.
Every shop environment is different. always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Like all machines there is danger associated
with this machine. accidents are frequently
caused by lack of familiarity or failure to pay
attention. Use this machine with respect
and caution to lessen the possibility of
operator injury. if normal safety precautions
are overlooked or ignored, serious personal
injury may occur.
-15-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTiON 2: CiRCUiT REQUiREMENTS
power Supply Circuit Requirements
Operation
you Must connect your machine to a grounded
circuit that is rated for the amperage given below.
never replace a circuit breaker on an existing cir-
cuit with one of higher amperage without consult-
ing a qualified electrician to ensure compliance
Serious personal injury could occur if you
with wiring codes. if you are unsure about the
connect the machine to power before com-
wiring codes in your area or you plan to con-
pleting the setup process. DO NOT connect
nect your machine to a shared circuit, consult
the machine to the power until instructed
a qualified electrician.
later in this manual.
g0671 Minimum Circuit size.................40 Amps
g0672 Minimum Circuit size.................50 Amps
g0673 Minimum Circuit size (220V).....40 Amps
g0673 Minimum Circuit size (440V).....20 Amps
Electrocution or fire could
result if machine is not
grounded and installed in
power Connection Device
We recommend having an electrician hardwire
compliance with electrical
the machine (using a metal conduit setup) directly
codes. Compliance MUST
to a locking disconnect switch (figure 6), which is
be verified by a qualified
directly connected to the power source.
electrician!
NOTICE
The Model G0671/G0672/G0673 is prewired
for 220v operation. if you plan to use your
hardwired locking
disconnect switch
Model G0673 at 440v, you MUST have a
qualified electrican perform the 440v con-
8dcYj^i
id
BVX]^cZ
8dcYj^i
id
EdlZgꢀHdjgXZ
version described on this page.
figure 6. hardwired locking disconnect switch.
full Load amperage Draw
440v Conversion
g0671 @ 220V..................................... 32 Amps
g0672 @ 220V.....................................34 Amps
g0673 @ 220V.....................................30 Amps
g0673 @ 440V..................................... 15 Amps
the Model g0673 can be converted for 440V
operation. this conversion job consists of discon-
necting the dust collector from the power source,
changing the magnetic switch, and rewiring the
motor for 440V operation, as shown on page 42.
the necessary magnetic switch for this procedure
can be purchased by calling grizzly Customer
service at (800) 523-4777 and ordering Model
g8296 (3-phase 440V 10hp Mag switch).
All wiring changes must be inspected by a quali-
fied electrician before the dust collector is con-
nected to the power source. if, at any time during
this procedure you need help, call grizzly tech
support at (570) 546-9663.
-16-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTiON 3: SETUp
Setup Safety
items Needed for
Setup
the following items are needed to complete the
setup process, but are not included with your
machine:
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Description
Qty
•
•
•
•
•
•
•
Assistant........................................1 or more
safety glasses (for each person)............... 1
gloves (for each person)............................ 1
phillips head screwdriver........................... 1
Wrench 10mm ............................................ 1
Wrenches 12mm ........................................ 2
ladder (for hanging upper bag).................. 1
Wear safety glasses dur-
ing the entire setup pro-
cess!
Unpacking
your machine was carefully packaged for safe
transportation. remove the packaging materials
from around your machine and inspect it. if you
discover the machine is damaged, please imme-
diately call Customer Service at (570) 546-9663
for advice.
This machine and its com-
ponents are very heavy.
Get lifting help or use
power lifting equipment
such as a forklift to move
heavy items.
save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
-17-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
A
G0671/G0672
inventory
B
the following is a description of the main compo-
nents shipped with your machine. lay the compo-
nents out to inventory them.
C
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
e
d
figure 7. g0671/g0672 inventory 1.
Contents (figures 7 & 8)
Qty
a. Collectors ................................................... 2
b. impeller housing with Motor....................... 1
C. Casters ....................................................... 4
D. leg Braces ................................................. 4
E. legs............................................................ 4
f. gaskets ...................................................... 2
G. 4-in-1 inlet Adapter..................................... 1
h. hangers...................................................... 2
i. hanger supports........................................ 2
J. lower Collection Bags, g0671 (fabric)....... 2
J. lower Collection Bags, g0672 (plastic)..... 2
K. upper Filter Bags (fabric) ........................... 2
h
i
g
J
F
K
fasteners (where used) (not shown)
Qty
5
hex Bolts ⁄16"-18 x 21⁄2" (legs).................... 8
figure 8. g0671/g0672 inventory 2.
•
•
•
•
•
•
•
•
5
hex nuts ⁄16"-18 (legs/collectors)............. 24
5
hex Bolts ⁄16"-18 x 1⁄2" (leg braces).......... 16
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
5
hex Bolts ⁄16"-18 x 1" (collectors)............. 16
1
hex Bolts ⁄4"-20 x 1⁄2" (hangers)................. 6
5
Flat Washers ⁄16" (collectors)................... 32
phillips head screw 10-24 X 3⁄8" (inlet) ...... 1
Bag Clamps (bags)..................................... 4
-18-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
G0673 inventory
g
the following is a description of the main compo-
nents shipped with your machine. lay the compo-
nents out to inventory them.
h
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
i
J
Contents (figures 9–11)
Qty
figure 10. g0673 inventory 2.
a. Collectors ................................................... 4
b. 5-in-1 inlet Adapter..................................... 1
C. g0673 impeller housing with Motor........... 1
D. legs............................................................ 4
E. leg Braces ................................................. 4
f. Casters ....................................................... 4
G. upper Filter Bags (fabric) ........................... 4
h. lower Collection Bags (plastic).................. 4
i. hangers...................................................... 4
J. hanger supports........................................ 4
K. rubber gaskets ......................................... 4
L. Bag Clamps................................................ 8
K
l
fasteners (where used) (not shown)
Qty
5
•
•
•
•
•
•
•
hex Bolts ⁄16"-18 x 21⁄2" (legs).................... 8
5
hex nuts ⁄16"-18" (legs/collectors)............ 40
figure 11. g0673 inventory 3.
5
hex Bolts ⁄16"-18 x 1⁄2" (leg braces).......... 16
5
hex Bolts ⁄16"-18 x 1" (collectors)............. 32
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
1
hex Bolts ⁄4"-20 x 1⁄2" (hangers)............... 12
5
Flat Washers ⁄16" (collectors)................... 64
phillips head screw 10-24 X 3⁄8" (inlet) ...... 1
B
C
A
e
F
d
figure 9. g0673 inventory 1.
-19-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
hardware Recognition Chart
-20-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
Site Considerations
assembly
floor Load
To assemble the dust collector:
refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
some residential floors may require additional
reinforcement to support both the machine and
operator.
1. With assistance, place the impeller housing
on the floor so that the motor is pointing up.
2. insert the legs into the leg mounting brackets
5
and secure them with the eight ⁄16"-18 x 21⁄2
"
5
hex bolts and ⁄16"-18 hex nuts, as shown in
figure 13. do not yet fully tighten the nuts.
placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. see figure 12 for the mini-
mum working clearances.
leg
m-
,(,¿-ꢀ
(&(¿-ꢀ
<%+,&$<%+,'
leg Mounting Bracket
-%(¿-ꢀ
figure 13. Attaching legs to impeller housing
(Model G0673 shown).
3. Attach the four leg braces to the legs with
5
1
the (16) ⁄16"-18 x ⁄2" hex bolts, as shown in
figure 14. Fully tighten the bolts and the
hardware from Step 2.
-%(¿-ꢀ
leg
<%+,(
figure 12. Model g0671-3 illustrated top view
and suggested clearances.
leg Brace
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
m&+
figure 14. Attaching leg braces.
-21-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Attach the four casters to the legs by thread-
ing them into the bottom of the legs, as shown
in figure 15.
Note: The Model G0673 is a three-phase
machine. If it is wired out of phase, the
machine may not function properly. Proceed
to Test Run on Page 25 to determine if your
machine is wired in phase, then proceed to
Step 7.
Caster
leg
The Models G0671 and G0672 are single
phase and cannot be wired out of phase. For
these models, continue below.
7. Attach the inlet to the top of the impeller
housing with the #10-24 x 3/8" phillips head
screw, as shown in figure 17.
m)
figure 15. Attaching casters.
5. With assistance, turn the entire assembly
over so that the casters rest on the floor.
phillips
head screw
5
5
6. use eight ⁄16"-18 x 1" hex bolts, (16) ⁄16" flat
5
washers, and eight ⁄16"-18 hex nuts to attach
each collector to the impeller housing with a
rubber gasket between the components, as
shown in figure 16.
figure 17. inlet mounted on impeller housing.
5⁄16" Flat Washers
impeller
housing
Collector
5⁄16"-18
hex nut
5⁄16"-18 x 1"
hex Bolt
rubber gasket
figure 16. Collector mounted to impeller
housing.
-22-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
8. secure the hanger into the hanger sup-
port with one (Model g0673) or two (Model
10. Align the hanger assembly so that the hook is
directly over the center of the collector.
1
1
g0671/g0672) ⁄4"-20 x ⁄2" hex bolts (see
figure 18).
11. repeat Steps 8–10 for the remaining hanger
assemblies.
hex Bolts
⁄
12. place the loop at the top of each upper col-
lection bag over each hook on the hanger
assemblies (see figure 20).
1
4"-20 x 1⁄2
"
hanger
hook
Bag loop
hanger support
hanger
Assembly
figure 18. hanger attached to hanger support
(g061/g0672 shown).
9. Mount the hanger assembly on the protruding
rod on the collector with one (Model g0671/
1
1
figure 20. upper filter bag mounted on hanger
assembly.
g0672) or two (Model g0673) ⁄4"-20 x ⁄2
"
hex bolts, as shown in figure 19.
13. thread the bag clamp into and around the
bottom seam of the upper collection bag (see
figure 21).
hanger
Assembly
Bag Clamp
hex Bolt
1
⁄
4"-20 x 1⁄2
"
figure 19. hanger assembly mounted onto
collector (g0671/g0672).
figure 21. upper filter bag secured to collector.
-23-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
14. slip the bottom of the bag with the clamp over
the top lip of the collector.
18. Wrap the bag clamp around the collector,
position it between the bottom lip of the col-
lector and the hooks, and fasten the bag
clamp to secure the bag to the collector (see
figure 23).
15. Fasten the locking mechanism of the bag
clamp to secure the bag to the collector (see
figure 21).
16. repeat Steps 12-15 for the remaining upper
bags.
17. install the lower bags.
—Model G0671: repeat Steps 13-15 in
a similar manner to install the remaining
lower collection bags on the lower rims of
each collector. then, proceed to Test Run
on page 25.
—Model G0672-73: slip the lower plastic
collection bag over the bottom lip of the col-
lector and position the bag evenly around
the collector. snag the bag on the hooks to
hold it in place until the bag clamp can be
secured (see figure 22).
Bag Clamp
figure 23. lower collection bag secured to
collector.
19. repeat Steps 17 & 18 for the remaining
Model g0672-73 lower bag assemblies.
Collector hook
figure 22. Bottom collection bag snagged on
collector hooks.
-24-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
5. listen to and watch for abnormal noises or
actions. the machine should run smoothly
with little or no vibration or rubbing noises.
Test Run
once the assembly is complete, test run your
machine to make sure it runs properly and is
ready for regular operation.
—strange or unusual noises should be inves-
tigated and corrected before operating the
machine further. Always disconnect the
machine from power when investigating or
correcting potential problems.
the test run consists of verifying the following: 1)
the motor powers up and runs correctly, and 2)
(Model g0673 only), the motor turns the correct
direction (machine is not wired out of phase).
6. turn the machine OFF by pushing in the red
button on the power switch.
if, during the test run, you cannot easily locate
the source of an unusual noise or vibration, stop
using the machine immediately, then review the
Troubleshooting on page 38.
7. Model G0673 Only: Verify that the power
is not connected out of phase by starting/
stopping the machine and determining if the
motor turns in the correct direction, using the
criteria below:
if you still cannot remedy a problem, contact our
tech support at (570) 546-9663 for assistance.
—if the impeller turns counterclockwise (as
looking down on the inlet port on the impel-
ler housing), it is turning in the correct
direction.
before starting the dust collector, make sure
you have performed the preceding assem-
bly instructions, and you have read through
the rest of the manual and are familiar with
the various functions and safety features
on this machine. failure to follow this warn-
ing could result in serious personal injury
or even death!
—if the impeller turns counterclockwise, it
is turning in the wrong direction. stop the
machine, shut off the power source, then
swap any two of the three power wires that
connect to the machine.
To test run the machine:
1. Make sure you have read the safety instruc-
tions at the beginning of the manual and that
the machine is setup properly.
2. Make sure all tools and objects used during
setup are cleared away from the machine.
3. Connect the machine to the power source.
4. turn the machine ON by pushing in the
green button on the power switch.
-25-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTiON 4: DESiGNiNG ThE
SySTEM
General
Duct Material
the Model g0671/g0672/g0673 can be operated
as either a stationary or mobile unit. there are
advantages and disadvantages to both set-ups.
the advantage of the mobile system is eliminating
the cost of many ducts and fittings. on the other
hand, the stationary system is more versatile and
convenient.
you have many choices regarding main line and
branch line duct material. For best results, use
metal duct for the main line and branch lines, then
use short lengths of flexible hose to connect each
machine to the branch lines.
plastic duct is also a popular material for home
shops. however, be aware that there is a fire or
explosion hazard if plastic duct material is used
for dust collection without being grounded against
static electrical charge build-up. this topic will be
discussed later in this section. Another problem
with using plastic is that it is less efficient per foot
than metal.
the Model g0671/g0672/g0673 is designed to
be a central dust collector system. locate the dust
collector in an out of the way location such as a
corner or separate room. these machines can
accomodate the following number of machines
each drawing 400 CFM on a 4" dust port:
G0671:............................................................... 8
G0672:............................................................... 9
G0673:............................................................. 12
Metal Duct
Advantages of metal duct (figure 24) is its
conductivity and that it does not contribute to
static electrical charge build-up. however, static
charges are still produced when dust particles
strike other dust particles as they move through
the duct. since metal duct is a conductor, it can
be grounded quite easily to dissipate any static
electrical charges.
the large suction capacity of the Model g0671/
g0672/g0673 allows great flexibility in planning
and designing of your dust collection duct layout.
grizzly offers a complete line of dust collection
accessories for setting up a stationary system.
Additionally, grizzly offers a complete guide book
titled Dust Collection Basics.
A 4-port inlet is included with the Model g0671/
g0672 and a 5-port inlet is included with the
Model g0673 for quick and economical dust col-
lection setup. however, depending upon your
system design using this feature, bags may fill at
different rates requiring you to empty some bags
more often than others.
Whatever system you choose, always make sure
there are no open flames (including pilot lights) in
the same room as the dust collector; otherwise
you risk an explosion if dust is dispersed into the
air.
figure 24. examples of metal pipe and
components.
-26-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
there are quite a number of options when it
comes to metal duct, but metal duct that is spe-
cially manufactured for dust collection is the best
choice. When selecting your metal duct, choose
high quality metal duct with smooth welded inter-
nal seams that will minimize airflow resistance.
this type of duct usually connects to other ducts
or elbows with a simple, self-sealing clamp, is
very quick and easy to assemble, and can be
readily dismantled and re-installed. this is espe-
cially important if you ever need to change things
around in your shop or add more machines. see
the accessories section on page 35 for exam-
ples.
there are also many kinds of pure plastic flexible
hose, such as non-perforated drainage type hose
and dryer vent hose. drainage type hose, while
being economical, does not quite have the flex-
ibility required for dust collection. the inside of the
duct is also deeply corrugated and can increase
the static pressure loss by as much as 50% over
smooth wall duct. dryer vent hose offers greater
flexibility, but is non-resistant to abrasion and
tends to collapse in a negative pressure system.
We do not recommend using dryer vent hose in
your dust collection system.
if using flex-hose, choose one of the many types
designed specifically for the movement of solid
particles, i.e. dust, grains and plastics. however,
the cost of specifically designed flexible duct can
vary greatly. grizzly offers polyethylene hose,
which is well suited for the removal of particulate
matter, especially sawdust, since it is durable and
completely flexible. polyethylene is also very eco-
nomical and available in a wide variety of diam-
eters and lengths for most applications.
Avoid inferior metal duct that requires you to cut it
to length and snap it together. this type of duct is
time consuming to install because it requires you
to seal all the seams with silicone and screw the
components on the ends with sheet metal screws.
Another disadvantage is the rough internal seams
and crimped ends that unavoidably increase static
pressure loss.
flexible Duct
plastic Duct
Flexible hose is generally used for short runs,
small shops and at rigid duct-to-tool connections.
there are many different types of flex hose on
the market today. these are manufactured from
materials such as polyethylene, pVC, cloth hose
dipped in rubber and even metal, including steel
and aluminum.
the popularity of plastic duct is due to the fact
that it is economical and readily available. it is
also simple to assemble and easily sealed against
air loss. the primary disadvantage of plastic duct
for dust collection is the inherent danger of static
electrical build-up.
the superior choice for flexible ducting is metal
flex hose that is designed to be flexible and as
smooth as possible to reduce static pressure
loss.
figure 26. example of plastic duct and
components.
figure 25. example of flexible metal duct.
g0671/g0672/g0673 dust Collector
-27-
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3. Sketch a basic Duct Layout
For the next step, sketch how your machines will
connect to the dust collector. Consider these gen-
eral guidelines for planning an efficient system:
System Design
Step 1. Decide Who Will Design
For most small-to-medium sized shops, you can
design and build the dust collection system your-
self without hiring engineers or consultants. We
have included some basic information here to get
you started on a dust collection system design.
1. Machines that produce the most sawdust
should be placed nearest to the dust collector
(i.e. planers and sanders).
2. ideally, you should design the duct system
to have the shortest possible main line and
secondary branch ducts. see figures 28 &
29 for ideas of good duct layouts vs bad duct
layouts.
if you have a large shop or must design a com-
plicated system, then we recommend that you
perform additional research beyond this manual,
or seek help from an expert.
Step 2. Sketch your Shop Layout
planning is the most important step when design-
ing a successful dust collection system.
7gVcX]
A^cZꢀ9jXih
'//$
Before you begin to draw your necessary layout
sketch, we recommend that you visit our Free
Workshop Planner available on our website at
BV^cꢀ
A^cZꢀ9jXi
our Workshop Planner will allow you to quickly
and easily draw and print a basic shop layout.
don't worry, non-grizzly brand machines can be
substituted with grizzly machines for layout pur-
poses. Note: After you're finished, make sure to
save your layout for later modification.
figure 28. good duct layout.
your sketch only needs the basic details of the
shop layout, similar to figure 27, including all
your current/planned machines and your planned
placement of the dust collector.
"!$
9jhiꢀ8daaZXidg
figure 29. Bad duct layout.
figure 27. initial sketch of shop layout.
-28-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
3. directional changes should be kept to a mini-
mum. the more directional change fittings
you use directly increases the overall resis-
tance to airflow.
if your machine does not have a built in dust port,
use figure 31 to determine the size of dust port
to install on your machine.
Machine
average Dust port Size
4. gradual directional changes are more effi-
cient than sudden directional changes (i.e.
use the largest corner radius possible when
changing hose or pipe direction).
table saw......................................................4"
Miter/radial-Arm saw....................................2"
Jointer (6" and smaller) .................................4"
Jointer (8"-12") ...............................................5"
thickness planer (13" and smaller)...............4"
thickness planer (14"-20") ............................6"
shaper...........................................................4"
router (mounted to table)..............................2"
Bandsaw........................................................4"
lathe..............................................................4"
disc sander (12" and smaller).......................2"
disc sander (13-18")......................................4"
Belt sander (6" and smaller) .........................2"
Belt sander (7"-9") ........................................3"
edge sander (6" x 80" and smaller)..............4"
edge sander (6" x 80" and larger) ................5"
drum sander (24" and smaller)...............2 x 4"
drum sander (24" and larger) .................4 x 4"
Widebelt sander (18" and smaller)................5"
Widebelt sander (24"–37" single head) ..2 x 6"
Widebelt sander (24"_51" double head) .5 x 4"
5. each branch line should have a blast gate
immediately after the branch to control suc-
tion from one machine to another.
6. the simpler the system, the more efficient
and less costly it will be.
Step 4. Determine Required CfM of
Each Machine
since each machine produces a different amount
of sawdust, the requirements for the minimum
amount of CFM needed to move that sawdust is
unique to the machine (for example, a planer pro-
duces more sawdust than a table saw). Knowing
this required CFM is important in gauging which
size of duct to use.
figure 30 will give you a close estimation of the
airflow your machine requires. Machines that
generate the most sawdust should be placed near
the dust collector. if the machine has multiple
dust ports, the total CFM required is the sum of
all ports.
figure 31. dust port size and quantity per
average machine.
Write the required CFM for each machine on your
sketch, as shown in figure 32.
Machine
Dust port Size
approximate
Required CfM
(.*
,.%
(.*
2"
2.5"
3"
98
.-
150
220
4"
395
5"
614
6"
884
7"
1203
1570
1990
2456
+&)
''%
(.*
8"
9"
figure 32. CFM requirements labeled for each
machine.
10"
figure 30. Approximate required airflow for
machines, based on dust port size.
-29-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
Determining Main Line Duct Size
the general rule of thumb for a main line duct is
that the velocity of the airflow must not fall below
3500 FpM.
(.*ꢀ
4“
,.%ꢀ
(.*ꢀ
4“
6“
.-ꢀ
use the inlet size of the dust collector as a starting
point for the main line. neck the main line down
1" for every 10' of length. this will usually keep
the air velocity above 3500 FpM and, depending
on your system, will allow you to keep multiple
branches open at one time.
9“
10“
4“
4“
4“
5“
+&)ꢀ
For the Model g0671/g0672/g0673 this is 10".
Mark your drawing, as in figure 33.
''%ꢀ
(.*ꢀ
figure 34. Branch line sizes labeled on sketch.
Multiple Dust ports
(.*ꢀ
,.%ꢀ
(.*ꢀ
if your machine has multiple dust ports, add the
total CFM given for each dust port size from
figure 30. refer to figure 35 and find the CFM
that is closest to your total to determine the cor-
rect branch size. split the branch line just before
the dust ports with matching duct sizes.
.-
9“
10“
Two Machines on Same branch Line
if both machines will be running at the same time,
add the total CFM given for each dust port size
from figure 30.
+&)ꢀ
''%ꢀ
(.*ꢀ
figure 33. Main line size labeled on sketch.
if both the machines will never be run at the same
time, reference the machine with biggest dust
port to figure 35 and add blast gates after the
y-branch to open/close the line to each machine.
Determining branch Line Duct Size
the general rule of thumb for a branch line duct is
that the velocity of the airflow must not fall below
4000 FpM.
Total CfM
<500
600
branch Line Size
4"
5"
5"
6"
6"
7"
8"
8"
For small/medium sized shops, using the dust
port size from the machine as the branch line duct
size will achieve the correct velocity in most appli-
cations. however, if the dust port on the machine
is smaller than 4", make the branch line 4" and
reduce the line right before the dust port.
700
800
1000
1200
1400
1600
Note: Systems with powerful dust collectors work
better if multiple blast gates are left open. This
also allows you to run two machines at once.
Experiment with different combinations of blast
gates open/closed to find the best results for your
system.
figure 35. Branch line sizing chart by total CFM
(for use when multiple machines share line).
Write your determined branch line sizes on your
drawing, as shown in figure 34.
-30-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
in most small/medium shops it is only necessary
to calculate FpM for the line (from the dust collec-
tor to the machine) with the longest duct length or
the most fittings (operating under the assumption
that if the line with the highest resistance works,
the others will be fine).
Calculating Duct Resistance
Adding duct work, elbows, branches and any
other components to a duct line increases airflow
resistance (static pressure loss). this resistance
can be minimized by using rigid (smooth) pipe and
gradual curves, as opposed to flexible pipe and
90˚ elbows.
the line with the longest duct length and most fit-
tings in our system sketch (see figure 34) is the
one connected to the router table, which draws
220 CFM.
to help you think about this resistance, imagine
riding a bicycle in a tunnel that is an exact replica
of your duct work. if the inside of the tunnel is very
bumpy (flexible pipe) and has many sharp turns
(90˚ elbows), it will take a lot more effort for you to
travel from one end to the other than if your path
is smooth and straight.
To calculate the static pressure loss of any
given line in the system, follow these steps:
1. Make a list of each size duct in the line,
including the length, and multiply those num-
bers by the static pressure loss value given in
figure 36.
the purpose of calculating this resistance is to
determine if it is low enough from the machine to
the dust collector to meet the given requirement
for the machine. use the charts in figure 36 to
calculate the resistance of duct work.
2. list each type of elbow or branch and multiply
the quantity (if more than one) by the static
pressure loss given in figure 36.
Duct
approximate
approximate
Dia.
Static pressure Static pressure
Loss per foot of Loss per foot
3. Add the additional factors from figure 37 to
your list.
Rigid pipe
of flex pipe
Main
lines
Branch
lines
Main
lines
Branch
lines
additional factors
seasoned (well used)
dust Collection Filter
entry loss at large
Machine hood
Static pressure Loss
1
at 3500 at 4000 at 3500 at 4000
FpM
0.091
0.08
FpM
0.122
0.107
0.094
0.075
0.059
0.047
0.036
0.027
0.019
FpM
0.35
FpM
0.453
0.397
0.352
0.28
2"
2.5"
3"
2
0.306
0.271
0.215
0.172
0.136
0.106
0.08
figure 37. Additional factors affecting static
pressure loss.
0.071
0.057
0.046
0.037
0.029
0.023
0.017
4"
5"
0.225
0.18
6"
7"
0.141
0.108
0.079
8"
9"
0.057
fitting
Dia.
90˚
45˚
45˚
90˚
Elbow Elbow Wye(y) Wye(y)
3"
4"
5"
6"
7"
8"
0.47
0.45
0.235
0.225
0.266
0.282
0.234
0.203
0.282
0.375
0.354
0.329
0.324
0.297
0.188
0.225
0.236
0.235
0.216
0.189
0.531
0.564
0.468
0.405
figure 36. static pressure loss charts.
g0671/g0672/g0673 dust Collector
-31-
Download from Www.Somanuals.com. All Manuals Search And Download.
4. total your list, as shown in the example in
figure 38, to come up with your overall static
pressure loss number for that line.
Performance Curve
)%%%
(,*%
(*%%
('*%
(%%%
',*%
'*%%
''*%
'%%%
&,*%
&*%%
&'*%
&%%%
,*%
Note: Always account for a seasoned filter,
so you don't end up with a system that only
works right when the filter is clean.
Closest
CFM
Main Line
(3550)
+ꢀꢁG^\^YꢁE^eZꢁꢂ#%(,ꢃꢁViꢁ'%ꢄ
################ %#,)%
################ %#,*%
Branch Line
4.4 sp loss
)ꢀꢁG^\^YꢁE^eZꢁꢂ#%,*ꢃꢁViꢁ&%ꢄ
)ꢀꢁ;aZmꢁE^eZꢁꢂ#'-ꢃꢁViꢁ*ꢄ ######################## &#)%%
*%%
'*%
Elbows/Branches
%
CFM
+ꢀꢁ)*ßꢁN"7gVcX]
################################ %#('.
%
&#%
'#%
(#%
)#%
*#%
+#%
,#%
-#%
.#%
&%#%
&&#%
&'#%
&
)ꢀꢁ)*ßꢁ:aWdl ######################################## %#''*
STATIC PRESSURE (Inch/H2O)
Additional Factors
HZVhdcZYꢁ;^aiZg
figure 39. CFM for static pressure loss of line
connected to g0671 dust collector & router.
################################ &#%%%
Total Static Pressure Loss ................ 4.444
—if the CFM for your static pressure loss
is above the requirement of the machine
connected to the end of that branch line,
then dust collection will most likely be
successful. Congratulations! you've just
designed your own dust system. refer to
the accessories section on page 35 to
start buying the components necessary to
make your system a reality.
figure 38. example list for totaling sp loss.
Note: When calculating static pressure loss to
determine if multiple lines can be left open at the
same time, only include the main line numbers
once.
5. Compare the total static pressure loss for
that line to the closest CFM given in the
performance Curve section on the Machine
Data Sheet (located toward the front of this-
manual).
—if the CFM for your static pressure loss is
below the requirement of the machine, then
that line will not effectively collect the dust.
you must then modify some of the factors
in that line to reduce the static pressure
loss. some of the ways to do this include:
1) installing larger duct, 2) reducing amount
of flexible duct used, 3) increasing machine
dust port size, 4) moving machine closer to
dust collector to eliminate duct length, and
5) reducing 90˚ elbows or replacing them
with 45˚ elbows
Example: go to the Model g0671 data sheet
Performance Curve section (see page 4) or
see figure 39 and find 4.4 on the pressure
axis, then go up the CFM axis to the closest
value—approximately 3550 CFM, as shown
in figure 39.
the 3550 CFM (figure 39) for the static pres-
sure loss of the line connected to the router is
well above the 220 CFM requirement of that
machine.
-32-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
ensure that the entire system is grounded. if using
plastic blast gates to direct air flow, the grounding
wire must be jumped (figure 40) around the
blast gate without interruption to the grounding
system.
System Grounding
since plastic hose is abundant, relatively inex-
pensive, easily assembled and air tight, it is a
very popular material for conveying dust from
woodworking machines to the dust collector. We
recommend using flexible hose (flex-hose) to con-
nect the woodworking machine to the dust collec-
tion system. however, plastic flex-hose and plastic
duct are insulators, and dust particles moving
against the walls of the plastic duct create static
electrical build up. this charge will build until it
discharges to a ground. if a grounding medium
is not available to prevent static electrical build
up, the electrical charge will arc to the nearest
grounded source. this electrical discharge may
cause an explosion and subsequent fire inside
the system.
plastic
Blast
gate
Copper
ground
Metal duct
Wire
figure 40. ground jumper wire when using
plastic blast gates and metal duct.
to protect against static electrical build up inside
a non-conducting duct, a bare copper wire should
be placed inside the duct along its length and
grounded to the dust collector. you must also
confirm that the dust collector is continuously
grounded through the electrical circuit to the elec-
tric service panel.
external ground
Wire
if you connect the dust collector to more than one
machine by way of a non-conducting branching
duct system and blast gates, the system must still
be grounded as mentioned above. We recom-
mend inserting a continuous bare copper ground
wire inside the entire duct system and attaching
the wire to each grounded woodworking machine
and dust collector.
internal
ground
Wire
ground screw
Flex-hose
figure 41. Flex-hose grounded to machine.
Be sure that you extend the bare copper wire
down all branches of the system. do not forget
to connect the wires to each other with wire nuts
when two branches meet at a “y” or “t” connec-
tion.
We also recommend wrapping the outside of all
plastic ducts with bare copper wire to ground the
outside of the system against static electrical build
up. Wire connections at y’s and t’s should be
made with wire nuts.
Attach the bare ground wire to each stationary
woodworking machine and attach to the dust col-
lector frame with a ground screw, as shown in
figure 41. ensure that each machine is continu-
ously grounded to the grounding terminal in your
electric service panel.
always guard against
static electrical build up
by grounding all dust
collection lines.
-33-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTiON 5: OpERaTiONS
Operation Safety
basic Controls
this section covers the basic controls used during
routine operations:
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
ON button: starts the motor.
Off button: stops the motor.
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
on
oFF
figure 42. on/oFF button locations.
General
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
operating your Model g0671/g0672/g0673 is
simple and straightforward. Blast gates located
at each of the woodworking machines control the
airflow from the woodworking machine to the dust
collector. if a machine is not being used, keep
the blast gate closed to maintain higher levels of
efficiency throughout the system.
NOTICE
if you have never used this type of machine
or equipment before, WE STRONGLy REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly industrial will
not be held liable for accidents caused by
lack of training.
DO NOT use the dust collector for any
other purpose besides collecting dust from
connected woodworking machines. a dust
collector should NEvER be used as a shop
vacuum. for safest use, wear a respirator
and use an air cleaner in addition to the
dust collector.
-34-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCessories
SECTiON 6: aCCESSORiES
h5293—4" Metal Duct Starter Kit
h5295—5" Metal Duct Starter Kit
h5297—6" Metal Duct Starter Kit
save over 20% with this great starter kit. includes:
(2) machine adapters, (10) pipe clamps, (3) 5'
straight pipes, (1) branch, (3) pipe hangers, (1)
end cap, (3) adjustable nipples, (1) 90˚ elbow, and
(1) 60˚ elbow.
G6162—4" x 5' Straight Metal pipe
G7346—5" x 5' Straight Metal pipe
G7364—6" x 5' Straight Metal pipe
h5227—7" x 5' Straight Metal pipe
h5237—8" x 5' Straight Metal pipe
h5252—9" x 5' Straight Metal pipe
these laser welded straight pipes ensure a super
smooth internal seam. ends easily clamp together
for a sealed fit without screws or silicone.
figure 43. Metal duct starter Kit.
figure 45. straight Metal pipe.
h5294—4" Metal Duct Machine addition Kit
h5296—5" Metal Duct Machine addition Kit
h5298—6" Metal Duct Machine addition Kit
save over 20% with this great machine addition
kit. includes: (2) blast gates, (1) machine adapter,
(10) pipe clamps, (2) pipe hangers, (2) 5' straight
pipes, (2) adjustable nipples, (1) branch, and (1)
60˚ elbow.
h7216—5" x 5' Rigid Metal flex hose
h7217—6" x 5' Rigid Metal flex hose
h7218—7" x 5' Rigid Metal flex hose
h7219—8" x 5' Rigid Metal flex hose
h7220—9" x 5' Rigid Metal flex hose
this flex hose provides just enough flexibility to
make difficult connections while still keeping the
inside wall as smooth as possible to minimize
static pressure loss.
figure 44. Metal duct Machine Addition Kit.
g0671/g0672/g0673 dust Collector
figure 46. rigid Metal Flex hose.
-35-
Download from Www.Somanuals.com. All Manuals Search And Download.
Metal Elbows
Metal branches
We carry many different branches, all designed
to minimize airflow resistance.
these industrial metal elbows are available from
4"–8" with 90˚, 60˚, 45˚, or 30˚ curves. Also, avail-
able with a 90˚ long radius curve. Call (800)
information and pricing.
90°
90° long radius
figure 49. Metal Branches.
Reducers & adapters
We carry a multitude of reducers and elbows to
cover most applications from 4" through 9".
30°
60°
45°
figure 47. Metal elbow examples.
G6177—4" Metal blast Gate
G7340—5" Metal blast Gate
G7358—6" Metal blast Gate
h5234—7" Metal blast Gate
h5249—8" Metal blast Gate
h5259—9" Metal blast Gate
figure 50. Metal reducers & Adapters.
G7979—phase Converter for Model G0673
Add 3-phase multi-motor capability to your single-
phase electrical supply! operate single or multiple
motors, transformers, and resistance loads at
100% power and 95% efficiency while saving big
dollars at cheaply-metered single-phase electrical
rates.
h2443—91⁄2" x 6" Universal adapter
seven step adapter provides a multitude of dust
collection reducing options.
figure 48. Metal Blast gate.
G8296—Mag Switch 3-phase 440v for Model
G0673 Conversion
figure 51. h2443 universal Adapter.
g0671/g0672/g0673 dust Collector
-36-
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTiON 7: MaiNTENaNCE
bag Cleaning
Disconnect power to the
machine when perform-
ing any maintenance,
assembly or adjustments.
failure to do this may
result in serious personal
injury.
all dust collectors dis-
perse fine dust which may
cause allergic reactions
or respiratory problems.
always wear a respirator
when operating your dust
collector.
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
empty the lower collection bags on a regular
basis to maintain dust collection efficiency.
Always wear the appropriate respirator or dust
mask and safety glasses when emptying the col-
lection bags. small dust particles can escape the
bags during emptying, causing them to become
airborne and easily inhaled. this microscopic air-
borne dust is extremely unhealthy to breathe and
can cause serious health problems.
Schedule
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
While the Model g0671/g0672/g0673 excels at
collecting the majority of wood dust produced
by your machines, we always recommend the
supplemental aid of a shop air filter. Air filters are
designed to collect the smaller airborne dust par-
ticles that a dust collector bags cannot trap.
Daily Check:
•
dust collector is completely powered down at
the end of use.
loose mounting bolts.
Worn switch or wires.
Any other condition that would hamper the
safe operation of this machine.
empty the lower collection bags before they
become completely full.
•
•
•
•
Lubrication
since all bearings are shielded and permanently
lubricated, simply leave them alone until they
need to be replaced. do not lubricate them.
-37-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTiON 8: SERviCE
review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-
ops. if you need replacement parts or you are unsure of your repair skills, then feel free to call our technical
support at (570) 546-9663.
Troubleshooting
Motor & Electrical
symptom
possible Cause
possible solution
Machine does not
start or a breaker
trips.
1. plug/receptacle is at fault or wired
incorrectly.
2. Motor connection wired incorrectly.
3. thermal overload relay has tripped.
1. test for good contacts; correct the wiring.
2. Correct motor wiring connections.
3. turn cut-out dial to increase working amps and
push the reset pin. replace if tripped multiple
times (weak relay).
4. Contactor not getting energized/has burnt 4. test for power on all legs and contactor operation.
contacts.
replace unit if faulty.
5. power supply is at fault/switched oFF.
5. ensure hot lines have correct voltage on all legs
and main power supply is switched on.
6. replace faulty on button or on/oFF switch.
6. Motor on button or on/oFF switch is at
fault.
7. Centrifugal switch is at fault.
8. Wiring is open/has high resistance.
7. Adjust/replace the centrifugal switch if available.
8. Check for broken wires or disconnected/corroded
connections, and repair/replace as necessary.
9. test/repair/replace.
9. Motor is at fault.
Machine stalls or is 1. Motor connection is wired incorrectly.
1. Correct motor wiring connections.
2. test for good contacts; correct the wiring.
3. test by rotating shaft; rotational grinding/loose
shaft requires bearing replacement.
underpowered.
2. plug/receptacle is at fault.
3. Motor bearings are at fault.
4. Motor has overheated.
5. Contactor not getting energized or has
poor contacts.
4. Clean off motor, let cool, and reduce workload.
5. test for power on all legs and contactor operation.
replace if faulty.
6. Motor is at fault.
6. test/repair/replace.
7. Centrifugal switch is at fault.
7. Adjust/replace centrifugal switch if available.
Machine has
vibration or noisy
operation.
1. Motor or component is loose.
1. inspect/replace stripped or damaged bolts/nuts,
and re-tighten with thread locking fluid.
2. replace dented fan cover; replace loose/damaged
fan.
2. Motor fan is rubbing on fan cover.
3. Motor mount loose/broken.
4. Motor bearings are at fault.
3. tighten/replace.
4. test by rotating shaft; rotational grinding/loose
shaft requires bearing replacement.
5. replace.
5. Centrifugal switch.
-38-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
Dust Collection Operation
SyMpTOM
pOSSibLE CaUSE
CORRECTivE aCTiON
loud, repetitious noise, or 1. dust collector is not on a flat
1. stabilize the dust collector.
excessive vibration coming
from dust collector.
surface and wobbles.
2. impeller fan is damaged and
unbalanced.
2. unplug dust collector, and inspect the impeller for
dents, bends, loose fins. replace impeller if any
damage is found.
3. the motor mounting is loose.
3. Make sure all fasteners on the dust collector are
tight.
4. impeller is loose on the motor
shaft.
4. replace the motor and impeller as a set if the
motor shaft and the impeller hub is damaged.
5. Motor fan cover is dented, causing 5. replace motor fan cover.
the motor fan to hit the cover while
spinning.
dust collector does not
adequately collect dust or
chips; poor performance.
1. dust collection bag is full/filter bag 1. empty collection bag/clean or replace filter bag.
is dirty.
2. there is a restriction in the duct
line.
2. remove dust line from dust collector inlet and
unblock the restriction in the duct line. A plumbing
snake may be necessary.
3. the dust collector is too far away
from the point of suction, or there
are too many sharp bends in the
ducting.
3. relocate the dust collector closer to the point of
suction, and rework ducting without sharp bends.
refer to Designing the System, beginning on
page 26.
4. the lumber is wet and not flowing 4. process lumber with less than 20% moisture
through the dust lines smoothly.
content.
5. there is a leak in the ducting, or a 5. rework the ducting to eliminate all leaks. Close
series of small leaks, or too many
open ports.
dust ports for lines not being used. refer to
Designing the System on page 26 for more
solutions.
6. there are not enough open branch 6. open 1 or 2 more blast gates to different branch
lines at one time, thereby causing
a velocity drop in the main line.
7. the ducting and ports are
incorrectly sized.
lines to allow the velocity in the main line to
increase.
7. reinstall correctly sized ducts and fittings. refer
to Designing the System on page 26 for more
solutions.
8. the machine dust collection
design is inadequate.
8. use a dust collection nozzle on a stand.
9. the dust collector is too small for
the dust collection system.
9. install a larger dust collector to power your dust
collection system.
sawdust being blown
into the air from the dust
collector.
1. Bag clamps, dust collection
bag, or filter bag is not properly
secured.
1. reclamp the dust collection bag and air filter bag,
making sure bag clamps are tight and completely
over the bags.
-39-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring
SECTiON 9: WiRiNG
Electrical Safety instructions
1. pRiNTED iNfORMaTiON. the electrical
4. CiRCUiT REQUiREMENTS. you Must fol-
low the CiRCUiT REQUiREMENTS section
on page 16. if you are unsure about the
wiring codes in your area or you plan to
connect your machine to a shared cir-
cuit, consult a qualified electrician.
information included in this section is current
at the time of printing. however, in the spirit
of improvement, we may make changes to
the electrical system of future machines.
study the photos and diagrams in this
section carefully. if you notice differences
between your machine and these diagrams,
call technical support at (570) 546-9663 for
assistance.
5. MOTOR WiRiNG. the motor wiring shown
in these diagrams are current at the time of
printing, but it may not match your machine.
Always use the wiring diagram inside the
motor junction box.
2. ShOCK hazaRD. disconnect power from
the machine before servicing electrical com-
ponents. touching electrified parts will result
in personal injury including but not limited to
severe burns, electrocution, or death.
6. EXpERiENCiNG DiffiCULTiES. if at any
time you are experiencing difficulties under-
standing the information included in this
section, contact our technical support at
(570) 546-9663.
3. GROUNDED CiRCUiT. electrocution or fire
could result if the machine is not grounded
and installed in compliance with electrical
codes. Compliance Must be verified by a
qualified electrician.
NOTICE
The photos and diagrams included in this
sectionarebestviewedincolor.youcanview
-40-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
G0671/G0672 Wiring Diagram
COLOR KEY
7`
7A68@
<c
<G::C
GY
G:9
Li
L=>I:
7`
6
Li
7`
7`
<c
A&$&
A'$(
A($*
CD&(
figure 52. G0671/G0672 switch wiring.
C8&*
H9:
C8&+
<c
CD&)
I&$'
I'$)
($)
I($+
7
&$'
*$+
''
()
.+
'-
.-
Li
7`
7`
7`
.*
figure 53. G0671/G0672 motor wiring.
7`
7`
<c
<c
<c
Li
Li
Li
7`
7`
7`
<gdjcY
GY GY
GY
GY
Gjc
HiVgi
8VeVX^idg 8VeVX^idg
*%B;9
(%%K68
ꢁ<%+,&ꢂ
+%%B;9
'*%K68
ꢁ<%+,&ꢂ
g0671
g0672
,*B;9
(*%K68
ꢁ<%+,'ꢂ
-%%B;9
'*%K68
ꢁ<%+,'ꢂ
<c
Li
7`
=di
<gdjcY
BDIDGꢀViꢀ''%K
H>C<A:ꢀE=6H:
figure 54. G0671/G0672 capacitors.
Locking Shut-Off Switch
(As Recommended)
You MUST read and understand the
-41-
g0671/g0672/g0673 dust Collector
Electrical Safety Instructions on Page 40.
Download from Www.Somanuals.com. All Manuals Search And Download.
G0673 Wiring Diagram
MOTOR DIRECTION
If motor rotates in opposite direc-
tion, swap any two power source
wires at the incoming terminals.
COLOR KEY
3-PHASE
220 VAC
<gdjcY
=di
7`
<c
GY
Li
<gdjcY
=di
7A68@
<G::C
G:9
3-PHASE
440 VAC
=di
=di
DISCONNECT
SWITCH
L=>I:
N:AADL
<c Li
GY 7`
<c 7`
GY Li
=di
=di
(as recommended
)
see figure 55
<c
Li
6
GY
<c
7`
7`
7`
Li
7`
7`
220V
&A&
(A'
*A( &(CD
MAGNETIC
SWITCH
A&$&
A'$(
A($*
,
CD
*(
TECO
<gdjcY
ASSEMBLY
DC
CN-
16
*)
CD
&)CD
'I&
)I'
+I(
I&$'
I'$)
I($+
-
7
7`
<c
440V
7`
MAGNETIC
SWITCH
IG>Eꢀ>C9#
B
6
&$'
GY
($)
Li
*$+
D
G
''
ASSEMBLY
(G8296)
()
I:HI
G:H:I
'-
D;;
.+
.-
.,ꢀCD
.-ꢀCD
.*ꢀC8
.+ꢀC8
7`
7`
7`
'I&
+I(
)I'
.*
Li
<c
see figure 56
BDIDGꢀ
Vi
BDIDGꢀ
GY
7` GY
7`
<c
<c
Vi
''%K
))%K
("E=6H:
'
-
'
(
(
("E=6H:
Li
Li &'
&&
.
&
,
&
&%
<gdjcY
<gdjcY
.
) &% + &' * &&
+
)
,
-
*
You MUST read and understand the
Electrical Safety InstrDuocwtnilooandsfroomnWPwwa.Sgoema4n0ua.ls.com. All Manuals Search And Download.
-42-
g0671/g0672/g0673 dust Collector
G0673 Electrical Components
figure 56. g0673 220V motor.
figure 55. g0673 220V switch.
You MUST read and understand the
-43-
g0671/g0672/g0673 dust Collector
Electrical Safety Instructions on Page 40.
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTiON 10: paRTS
G0671 parts breakdown
&+
&+
'%
&.
&)
&(
+
'%
&,
&%
&&
,
-
&*
&,
&,
&*
&-
'-
.
&,
(%
&'
&.
'.
'.
)%
'-
(%
&"&
&"'
)%
&.
(&
((
('
*
)
&
&-
&.
'
&"(
&")
()
(*
')
'(
(-
(.
(+
&"*
&"+
)&
(
''
'&
',
'&
''
',
&",
'+
(-
(("'
(("(
((")
'+
&"-
(("*
(("&
(,
'*
-44-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
G0671 parts List
REF PART #
DESCRIPTION
MOTOR 4HP, 220V, 1 PH
REF PART #
DESCRIPTION
1
P0671001
20
21
22
23
24
25
26
27
28
29
30
31
32
33
P0671020
P0671021
P0671022
PB23
FILTER BAG 30 MICRON 23-5/8" X 47-1/4"
RIGHT LEG
1-1
1-2
1-3
1-4
1-5
1-6
1-7
1-8
2
P0671001-1 FAN COVER
P0671001-2 FAN
LEFT LEG
P0671001-3 S CAPACITOR COVER
P0671001-4 S CAPACITOR 600M 250V X 1-3/4 X 3-7/8
P0671001-5 R CAPACITOR COVER
P0671001-6 R CAPACITOR 50M 300V X 1-3/4 X 2-3/4
P0671001-7 JUNCTION BOX
HEX BOLT 5/16-18 X 2-1/2
HEX NUT 5/16-18
PN02
PB09
HEX BOLT 5/16-18 X 1/2
F/R LEG BRACE
P0671026
P0671027
PB03
L/R LEG BRACE
P0671001-8 CENTRIFUGAL SWITCH
HEX BOLT 5/16-18 X 1
FLAT WASHER 5/16
HEX NUT 5/16-18
PN08
HEX NUT 3/8-16
PW07
3
PLW04
LOCK WASHER 3/8
KEY 6 X 6 X 25
PN02
4
PK143M
P0671005
PB07
P0671031
PS01
MAGNETIC SWITCH PLATE
PHLP HD SCR 10-24 X 1/2
MAGNETIC SWITCH
5
MOTOR GASKET
6
HEX BOLT 5/16-18 X 3/4
INLET COVER
P0671033
7
P0671007
P0671008
PB34
33-1 P0671033-1 MAG SWITCH BACK COVER
33-2 P0671033-2 CONTACTOR SDE MP-15 220V
33-3 P0671033-3 OL RELAY SDE RA-30 21-35
33-4 P0671033-4 MAG SWITCH FRONT COVER
33-5 P0671033-5 PLASTIC COVER SCREW 11/32-16 X 3/4
8
IMPELLER 14-1/2"
9
HEX BOLT 3/8-16 X 1/2
CAP SCREW M6-1 X 20
FLAT WASHER 6MM
COLLECTOR HOUSING
PHLP HD SCR 10-24 X 3/8
INLET ADAPTER
10
11
12
13
14
15
16
17
18
19
PSB02M
PW03M
P0671012
PS06
34
35
36
37
38
39
40
41
P0671034
P0671035
P0671036
P0671037
P0671038
PB24
STRAIN RELIEF
MOTOR CORD 12AWG X 3C
POWER CORD 12AWG X 3C
CASTER WITH BRAKE
LOWER DUST BAG 23-5/8" X 47-1/4"
HEX BOLT 3/8-16 X 1-1/4
RUBBER GASKET
P0671014
P0671015
P0671016
PB19
BAG HANGER LOWER SUPPORT
BAG HANGER
HEX BOLT 1/4-20 X 1/2
COLLECTOR DRUM
BAG CLAMP
P0671018
P0671019
P0671040
PW02
FLAT WASHER 3/8
-45-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
G0672 parts breakdown
&+
&+
'%
&.
&)
&(
+
'%
&,
&%
&&
,
-
&*
&,
&,
&-
'-
.
&*
(%
&,
&'
&.
'.
'.
)%
'-
(%
&"&
&"'
&.
(&
)%
((
('
*
&-
&.
)
'
&"(
&")
&
()
(*
')
(-
(+
'(
(.
(
&"*
&"+
)&
''
'&
'&
''
&",
',
(-
'+
(("'
(("(
((")
&"-
'+
',
(("*
(("&
(,
'*
-46-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
G0672 parts List
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
P0672001
P0672001-1
P0672001-2
P0672001-3
P0672001-4
P0672001-5
P0672001-6
P0672001-7
P0672001-8
PN08
MOTOR 5HP, 220V, 1 PH
FAN COVER
20
P0672020
P0671021
P0671022
PB23
FILTER BAG 2.5 MICRON 23-5/8" X 70"
RIGHT LEG
1-1
1-2
1-3
1-4
1-5
1-6
1-7
1-8
2
21
FAN
22
LEFT LEG
S CAPACITOR COVER
S CAPACITOR 800M 250V 1-3/4 X 3-3/4
R CAPACITOR COVER
R CAPACITOR 75M 350V 2 X 4-3/8
JUNCTION BOX
23
HEX BOLT 5/16-18 X 2-1/2
HEX NUT 5/16-18
24
PN02
25
PB09
HEX BOLT 5/16-18 X 1/2
F/R LEG BRACE
26
P0671026
P0671027
PB03
27
L/R LEG BRACE
CENTRIFUGAL SWITCH
HEX NUT 3/8-16
28
HEX BOLT 5/16-18 X 1
FLAT WASHER 5/16
29
PW07
3
PLW04
LOCK WASHER 3/8
KEY 6 X 6 X 25
30
PN02
HEX NUT 5/16-18
4
PK143M
31
P0671031
PS01
MAGNETIC SWITCH PLATE
PHLP HD SCR 10-24 X 1/2
MAGNETIC SWITCH
5
P0671005
PB07
MOTOR GASKET
32
6
HEX BOLT 5/16-18 X 3/4
INLET COVER
33
P0671033
P0671033-1
P0671033-2
P0671033-3
P0671033-4
P0671033-5
P0672034
P0672035
P0672036
P0671037
P0672038
PB24
7
P0671007
P0672008
PB34
33-1
33-2
33-3
33-4
33-5
34
MAG SWITCH BACK COVER
CONTACTOR SDE MP-15 220V
OL RELAY SDE RA-30 21-35
MAG SWITCH FRONT COVER
PLASTIC COVER SCREW 11/32-16 X 3/4
STRAIN RELIEF
8
IMPELLER 15"
9
HEX BOLT 3/8-16 X 1/2
CAP SCREW M6-1 X 20
FLAT WASHER 6MM
COLLECTOR HOUSING
PHLP HD SCR 10-24 X 3/8
INLET ADAPTER
10
11
12
13
14
15
16
17
18
19
PSB02M
PW03M
P0671012
PS06
35
MOTOR CORD 10AWG X 3C
POWER CORD 10AWG X 3C
CASTER WITH BRAKE
LOWER DUST BAG 23-5/8" X 57"
HEX BOLT 3/8-16 X 1-1/4
RUBBER GASKET
P0671014
P0672015
P0672016
PB19
36
BAG HANGER LOWER SUPPORT
BAG HANGER
37
38
HEX BOLT 1/4-20 X 1/2
COLLECTOR DRUM
BAG CLAMP
39
P0671018
P0671019
40
P0671040
PW02
41
FLAT WASHER 3/8
-47-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
G0673 parts breakdown
&+
&+
'%
'%
&+
&+
'%
'%
&,
&*
&,
&*
&,
&)
&*
&.
&-
&.
()
&-
&*
',
&(
&.
'.
(&
&.
'-
(%
)%
&-
(%"'
(%"(
('
''
(%")
(%"*
((
&&
&'
.
&.
&%
-
&-
'(
&.
'&
'&
(%"&
,
'&
'&
')
')
+
*
)
'*
'
(
')
'+
')
'*
'+
'+
&
&"&
'+
(*
(*
&"'
&"(
-48-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
G0673 parts List
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
P0673001
P0673001-1
P0673001-2
P0673001-3
PN41
MOTOR 10HP, 220V, 3 PH
FAN COVER
20
21
22
23
24
25
26
27
28
29
30
P0672020
P0673021
PB23
FILTER BAG 2.5 MICRON 23-5/8" X 70"
LEG
1-1
1-2
1-3
2
FAN
HEX BOLT 5/16-18 X 2-1/2
HEX NUT 5/16-18
JUNCTION BOX
PN02
HEX NUT 1/2"-12
P0673024
PB09
LEG BRACE
3
PLW07
LOCK WASHER 1/2
KEY 8 X 8 X 25
HEX BOLT 5/16-18 X 1/2
CASTER WITH BRAKE
HEX BOLT 5/16-18 X 1
HEX NUT 5/16-18
4
PK149M
P0673005
PB07
P0671037
PB03
5
MOTOR GASKET
HEX BOLT 5/16-18 X 3/4
INLET COVER
6
PN02
7
P0673007
P0673008
P0673009
PB16
PS01
PHLP HD SCR 10-24 X 1/2
MAGNETIC SWITCH
8
HEX BOLT 1/2 X 1-1/2
IMPELLER 17"
P0673030
9
30-1 P0673030-1
30-2 P0673030-2
30-3 P0671033-3
30-4 P0673030-4
30-5 P0671033-5
MAG SWITCH BACK COVER
CONTACTOR SDE MP-30 220V 3PH
OL RELAY SDE RA-30 21-35
MAG SWITCH FRONT COVER
PLASTIC COVER SCREW 11/32-16 X 3/4
STRAIN RELIEF
10
11
12
13
14
15
16
17
18
19
HEX BOLT 3/8-16 X 1-1/2
FLAT WASHER 6MM
CAP SCREW M6-1 X 20
COLLECTOR HOUSING
INLET ADAPTER
PW03M
PSB02M
P0673013
P0673014
P0672015
P0672016
PB19
31
32
33
34
35
40
P0673031
P0673032
P0673033
PS06
BAG HANGER LOWER SUPPORT
BAG HANGER
MOTOR CORD 10AWG X 4C
POWER CORD 10AWG X 4C
PHLP HD SCR 10-24 X 3/8
LOWER DUST BAG 23-5/8" X 57"
RUBBER GASKET
HEX BOLT 1/4-20 X 1/2
COLLECTOR DRUM
BAG CLAMP
P0671018
P0671019
P0672038
P0671040
-49-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
Label placement
G0672
G0671
*%
*%
*&
*&
*+
*+
**
**
*'
*'
*(
*(
*)
*)
G0673
REF PART #
DESCRIPTION
50
51
51
51
52
52
53
54
55
56
P0671050
P0671051
P0672051
P0673051
G8588
HANDS INLET WARNING (G0671, G0672)
MACHINE ID LABEL (G0671)
MACHINE ID LABEL (G0672)
MACHINE ID LABEL (G0673)
GRIZZLY NAMEPLATE (G0671, G0672)
GRIZZLY NAMEPLATE (G0673)
EAR PROTECTION 2" X 3-5/16"H
GLASSES/RESPIRATOR
G9987
PLABEL-15
PLABEL-37
*&
PLABEL-12A READ MANUAL-VERTICAL NS 7/05
PPAINT-1 GRIZZLY GREEN TOUCH-UP PAINT
*+
**
*'
*(
*)
Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine
MUST maintain the original location and readability of the labels on the machine. if any label is
removed or becomes unreadable, REpLaCE that label before using the machine again. Contact
-50-
g0671/g0672/g0673 dust Collector
Download from Www.Somanuals.com. All Manuals Search And Download.
7!22!.49 #!2$
CVbZꢀTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT ꢀ
HigZZiꢀTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT
8^inꢀ TTTTTTTTTTTTTTTTTTTTTTT HiViZꢀTTTTTTTTTTTTTTTTTTTTTTTTT O^eꢀ TTTTTTTTTTTTTTTTTTTTT
E]dcZꢀꢁꢀTTTTTTTTTTTTTTTTTTTT :bV^aꢀ TTTTTTTTTTTTTTTTTTTTTTTT >ckd^XZꢀꢁꢀTTTTTTTTTTTTTTTTT
BdYZaꢀꢁꢀTTTTTTTTTTTTTTTTTTTT DgYZgꢀꢁꢀTTTTTTTTTTTTTTTTTTTTTTT HZg^VaꢀꢁꢀTTTTTTTTTTTTTTTTTT
4HE FOLLOWING INFORMATION IS GIVEN ON A VOLUNTARY BASISꢀ )T WILL BE USED FOR MARKETING PURPOSES TO HELP US DEVELOP
BETTER PRODUCTS AND SERVICESꢀ /F COURSEꢀ ALL INFORMATION IS STRICTLY CONFIDENTIALꢁ
ꢀꢁꢀ =dlꢀY^YꢀndjꢀaZVgcꢀVWdjiꢀjh4
ꢀ
ꢀTTTT 6YkZgi^hZbZciꢀ
ꢀ TTTT ;g^ZcYꢀ
ꢀ TTTT LZWh^iZꢀ
ꢀTTTT 8ViVad\
ꢀTTTT Di]Zg/
ꢀ
ꢀTTTT 8VgYꢀ9ZX`ꢀ
ꢂꢁꢀ L]^X]ꢀd[ꢀi]Zꢀ[daadl^c\ꢀbV\Vo^cZhꢀYdꢀndjꢀhjWhXg^WZꢀid4
TTTT 8VW^cZiꢀBV`Zg
TTTT ;Vb^anꢀ=VcYnbVc
TTTT =VcYꢀAdVYZg
TTTT EdejaVgꢀBZX]Vc^Xh
TTTT EdejaVgꢀHX^ZcXZ
TTTT EdejaVgꢀLddYldg`^c\
TTTT EgVXi^XVaꢀ=dbZdlcZg
TTTT EgZX^h^dcꢀH]ddiZg
TTTT Egd_ZXihꢀ^cꢀBZiVa
TTTT G8ꢀBdYZaZg
TTTT IdYVn»hꢀ=dbZdlcZg
TTTT LddY
TTTT LddYZcꢀ7dVi
TTTT LddYh]deꢀCZlh
TTTT LddYhb^i]
TTTT =VcYn
TTTT =dbZꢀH]deꢀBVX]^c^hi
TTTT ?djgcVaꢀd[ꢀA^\]iꢀ8dci#
TTTT A^kZꢀHiZVb
TTTT BdYZaꢀ6^geaVcZꢀCZlh
TTTT BdYZaiZX
TTTT LddYldg`
TTTT LddYldg`ZgꢀLZhi
TTTT LddYldg`Zg»hꢀ?djgcVa
TTTT Di]Zg/
TTTT G^ÄZ
TTTT H]deꢀCdiZh
TTTT DaYꢀ=djhZꢀ?djgcVa
TTTT H]di\jcꢀCZlh
ꢃꢁꢀ L]Viꢀ^hꢀndjgꢀVccjVaꢀ]djhZ]daYꢀ^cXdbZ4
ꢀ
ꢀTTTT ꢂ'%!%%%"ꢂ'.!%%%ꢀ
ꢀ TTTT ꢂ(%!%%%"ꢂ(.!%%%ꢀ
ꢀTTTT ꢂ)%!%%%"ꢂ).!%%%
ꢀTTTT ꢂ,%!%%%
ꢀ
ꢀTTTT ꢂ*%!%%%"ꢂ*.!%%%ꢀ
ꢀ TTTT ꢂ+%!%%%"ꢂ+.!%%%ꢀ
ꢄꢁꢀ L]Viꢀ^hꢀndjgꢀV\Zꢀ\gdje4
ꢀ
ꢀTTTT '%"'.ꢀ
ꢀ TTTT (%"(.ꢀ
ꢀ TTTT +%"+.ꢀ
ꢀTTTT )%").
ꢀTTTT ,%
ꢀ
ꢀTTTT *%"*.ꢀ
ꢅꢁꢀ =dlꢀadc\ꢀ]VkZꢀndjꢀWZZcꢀVꢀlddYldg`Zg$bZiValdg`Zg4
ꢀTTTT %"'ꢀNZVghꢀ ꢀTTTT '"-ꢀNZVghꢀ ꢀTTTT -"'%ꢀNZVghꢀꢀ
ꢀ
ꢀ TTTT'% ꢀNZVgh
ꢆꢁꢀ =dlꢀbVcnꢀd[ꢀndjgꢀbVX]^cZhꢀdgꢀiddahꢀVgZꢀ<g^ooan4
ꢀTTTT %"'ꢀ ꢀTTTT ("*ꢀ
ꢀ
ꢀTTTT +".ꢀ
ꢀ TTTT&%
ꢀTTTTTCd
ꢀTTTTTCd
ꢇꢁꢀ 9dꢀndjꢀi]^c`ꢀndjgꢀbVX]^cZꢀgZegZhZcihꢀVꢀ\ddYꢀkVajZ4ꢀ
ꢈꢁꢀ LdjaYꢀndjꢀgZXdbbZcYꢀ<g^ooanꢀ>cYjhig^VaꢀidꢀVꢀ[g^ZcY4ꢀ
ꢀTTTTTNZhꢀ
ꢀTTTTTNZhꢀ
ꢉꢁꢀ LdjaYꢀndjꢀVaadlꢀjhꢀidꢀjhZꢀndjgꢀcVbZꢀVhꢀVꢀgZ[ZgZcXZꢀ[dgꢀ<g^ooanꢀXjhidbZghꢀ^cꢀndjgꢀVgZV4
.OTEꢊ 7E NEVER USE NAMES MORE THAN ꢁ TIMESꢀꢀ ꢀTTTTTNZhꢀ ꢀTTTTTCd
ꢀ
ꢀꢋꢁꢀ 8dbbZcih/ ?????????????????????????????????????????????????????????????????????
?????????????????????????????????????????????????????????????????????????????????
?????????????????????????????????????????????????????????????????????????????????
?????????????????????????????????????????????????????????????????????????????????
Download from Www.Somanuals.com. All Manuals Search And Download.
;DA9ꢀ6ADC<ꢀ9DII:9ꢀA>C:
EaVXZ
HiVbe
=ZgZ
'2)::,9 ).$5342)!,ꢀ ).#ꢁ
0ꢁ/ꢁ "/8 ꢂꢃꢄꢅ
"%,,).'(!-ꢀ 7! ꢅꢆꢂꢂꢇꢈꢂꢃꢄꢅ
;DA9ꢀ6ADC<ꢀ9DII:9ꢀA>C:
HZcYꢀVꢀ<g^ooanꢀ8ViVad\ꢀidꢀVꢀ[g^ZcY/
CVbZTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT
HigZZiTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT
8^inTTTTTTTTTTTTTTHiViZTTTTTTO^eTTTTTT
I6E:ꢀ6ADC<ꢀ:9<:H""EA:6H:ꢀ9DꢀCDIꢀHI6EA:
Download from Www.Somanuals.com. All Manuals Search And Download.
WaRRaNTy aND RETURNS
7!22!.49 !.$ 2%452.3
<g^ooanꢀ>cYjhig^Va!ꢀ>cX#ꢀlVggVcihꢀZkZgnꢀegdYjXiꢀ^iꢀhZaahꢀ[dgꢀVꢀeZg^dYꢀd[ꢀꢀ YEARꢀidꢀi]Zꢀdg^\^cVaꢀejgX]VhZgꢀ[gdbꢀ
i]ZꢀYViZꢀd[ꢀejgX]VhZ#ꢀI]^hꢀlVggVcinꢀYdZhꢀcdiꢀVeeanꢀidꢀYZ[ZXihꢀYjZꢀY^gZXianꢀdgꢀ^cY^gZXianꢀidꢀb^hjhZ!ꢀVWjhZ!ꢀ
cZ\a^\ZcXZ!ꢀVXX^YZcih!ꢀgZeV^ghꢀdgꢀVaiZgVi^dchꢀdgꢀaVX`ꢀd[ꢀbV^ciZcVcXZ#ꢀI]^hꢀ^hꢀ<g^ooan»hꢀhdaZꢀlg^iiZcꢀlVggVcinꢀ
VcYꢀVcnꢀVcYꢀVaaꢀlVggVci^Zhꢀi]ViꢀbVnꢀWZꢀ^bea^ZYꢀWnꢀaVl!ꢀ^cXajY^c\ꢀVcnꢀbZgX]VciVW^a^inꢀdgꢀ[^icZhh!ꢀ[dgꢀVcnꢀeVg"
i^XjaVgꢀejgedhZ!ꢀVgZꢀ]ZgZWnꢀa^b^iZYꢀidꢀi]ZꢀYjgVi^dcꢀd[ꢀi]^hꢀlg^iiZcꢀlVggVcin#ꢀLZꢀYdꢀcdiꢀlVggVciꢀdgꢀgZegZhZciꢀ
i]Viꢀi]ZꢀbZgX]VcY^hZꢀXdbea^Zhꢀl^i]ꢀi]Zꢀegdk^h^dchꢀd[ꢀVcnꢀaVlꢀdgꢀVXihꢀjcaZhhꢀi]ZꢀbVcj[VXijgZgꢀhdꢀlVggVcih#ꢀ
>cꢀcdꢀZkZciꢀh]Vaaꢀ<g^ooan»hꢀa^VW^a^inꢀjcYZgꢀi]^hꢀlVggVcinꢀZmXZZYꢀi]ZꢀejgX]VhZꢀeg^XZꢀeV^Yꢀ[dgꢀi]ZꢀegdYjXiꢀVcYꢀ
VcnꢀaZ\VaꢀVXi^dchꢀWgdj\]iꢀV\V^chiꢀ<g^ooanꢀh]VaaꢀWZꢀig^ZYꢀ^cꢀi]ZꢀHiViZꢀd[ꢀLVh]^c\idc!ꢀ8djcinꢀd[ꢀL]ViXdb#
LZꢀh]Vaaꢀ^cꢀcdꢀZkZciꢀWZꢀa^VWaZꢀ[dgꢀYZVi]!ꢀ^c_jg^ZhꢀidꢀeZghdchꢀdgꢀegdeZginꢀdgꢀ[dgꢀ^cX^YZciVa!ꢀXdci^c\Zci!ꢀheZX^Va!ꢀ
dgꢀXdchZfjZci^VaꢀYVbV\ZhꢀVg^h^c\ꢀ[gdbꢀi]ZꢀjhZꢀd[ꢀdjgꢀegdYjXih#
IdꢀiV`ZꢀVYkVciV\Zꢀd[ꢀi]^hꢀlVggVcin!ꢀXdciVXiꢀjhꢀWnꢀbV^aꢀdgꢀe]dcZꢀVcYꢀ\^kZꢀjhꢀVaaꢀi]ZꢀYZiV^ah#ꢀLZꢀl^aaꢀi]Zcꢀ
^hhjZꢀndjꢀVꢀ¸GZijgcꢀCjbWZg!»»ꢀl]^X]ꢀbjhiꢀWZꢀXaZVganꢀedhiZYꢀdcꢀi]Zꢀdjih^YZꢀVhꢀlZaaꢀVhꢀi]Zꢀ^ch^YZꢀd[ꢀi]Zꢀ
XVgidc#ꢀLZꢀl^aaꢀcdiꢀVXXZeiꢀVcnꢀ^iZbꢀWVX`ꢀl^i]djiꢀi]^hꢀcjbWZg#ꢀEgdd[ꢀd[ꢀejgX]VhZꢀbjhiꢀVXXdbeVcnꢀi]Zꢀ
bZgX]VcY^hZ#ꢀ
I]ZꢀbVcj[VXijgZghꢀgZhZgkZꢀi]Zꢀg^\]iꢀidꢀX]Vc\ZꢀheZX^[^XVi^dchꢀViꢀVcnꢀi^bZꢀWZXVjhZꢀi]ZnꢀXdchiVcianꢀhig^kZꢀidꢀ
VX]^ZkZꢀWZiiZgꢀfjVa^inꢀZfj^ebZci#ꢀLZꢀbV`ZꢀZkZgnꢀZ[[dgiꢀidꢀZchjgZꢀi]ViꢀdjgꢀegdYjXihꢀbZZiꢀ]^\]ꢀfjVa^inꢀVcYꢀ
YjgVW^a^inꢀhiVcYVgYhꢀVcYꢀlZꢀ]deZꢀndjꢀcZkZgꢀcZZYꢀidꢀjhZꢀi]^hꢀlVggVcin#
EaZVhZꢀ[ZZaꢀ[gZZꢀidꢀlg^iZꢀdgꢀXVaaꢀjhꢀ^[ꢀndjꢀ]VkZꢀVcnꢀfjZhi^dchꢀVWdjiꢀi]ZꢀbVX]^cZꢀdgꢀi]ZꢀbVcjVa#ꢀ
I]Vc`ꢀndjꢀV\V^cꢀ[dgꢀndjgꢀWjh^cZhhꢀVcYꢀXdci^cjZYꢀhjeedgi#ꢀLZꢀ]deZꢀidꢀhZgkZꢀndjꢀV\V^cꢀhddc#
Download from Www.Somanuals.com. All Manuals Search And Download.
"UY $IRECT AND 3AVE WITH 'RIZZLY® n 4RUSTEDꢀ 0ROVEN AND A 'REAT 6ALUEꢁ
6ISIT /UR 7EBSITE 4ODAY !ND $ISCOVER
7HY 'RIZZLY® )S 4HE )NDUSTRY ,EADERꢀ
s 3%#52% /2$%2).'
s /2$%23 3()00%$ 7)4(). ꢃꢄ (/523
s %ꢂ-!), 2%30/.3% 7)4(). /.% (/52
ꢂ/2ꢂ
#ALL 4ODAY &OR !
&2%%
&ULL #OLOR #ATALOG
Download from Www.Somanuals.com. All Manuals Search And Download.
|