3
⁄
8" STRAIGHT AIR DRILL
MODEL H6363
INSTRUCTION SHEET
Introduction
The Model H6363 is ideal for production drilling
applications. It features a paddle switch with safe-
ty release, 2,600 RPM free speed and 3⁄8" drilling
capacity. Recommended air pressure is 90 PSI
and average air consumption is 6 CFM. Includes
a 1⁄4" NPT air fitting and chuck key.
Inventory
A. Air Drill........................................................ 1
1
B.
⁄4" NPT Air Fitting....................................... 1
C. Chuck Key.................................................. 1
Figure 1. Model H6363.
Lubricating Your New Air Drill
Lubricate your air drill with pneumatic tool oil. If
you do not have a lubricator installed in your air
line, place 1–2 drops of pneumatic tool oil into the
air fitting daily, as shown in Figure 2.
Damage to your eyes, lungs, and ears could
result from using this drill without proper
protective gear. Always wear safety glasses,
a respirator, and hearing protection while
drilling.
Figure 2. Lubricating the Model H6363.
Need Help?
If you need help with your new air drill, call our
service department at: (570) 546-9663.
COPYRIGHT © NOVEMBER, 2004 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR6761 PRINTED IN CHINA
Download from Www.Somanuals.com. All Manuals Search And Download.
|