MODEL H8091
31/2 Ton Quick Pump
Garage Jack
Specifications
Maximum Lifting Capacity .....................7000 lbs.
Lifting Range .......................................43⁄4"–145⁄8
"
Weight .......................................................83 lbs.
Release
Valve Gear
Jack Handle
Machine
Foot
Pedal
Label
Foot
Pedal
Saddle
Figure 2. Pump pedal and release valve gear.
Failure to follow these instructions could
result in serious personal injury or death:
Figure 1. Model H8091 Identification.
1. DO NOT overload this jack beyond its
rated capacity. Overloading can cause
the jack to collapse and drop the load.
2. ALWAYS support the vehicle with
appropriately rated support stands
before working under it.
Operation
To raise the saddle gradually:
Turn the jack handle clockwise as far as it will
turn and pump the handle up and down. Turning
the handle clockwise will close the release valve
(see Figure 2).
3. DO NOT attempt to move the vehicle
while the jack is in use.
4. Use only on hard level surfaces like
concrete or asphalt. Other surfaces are
potentially unstable.
5. Center the load on the jack to maintain
proper balance and stability.
6. DO NOT use jack if it begins leaking
fluid or if it sinks when placed under
load. These are indications that the jack
needs to be immediately serviced.
To raise the saddle quickly:
With the jack handle turned fully clockwise, push
the foot pedal down and release it slowly. Each
pump of the pedal will raise the saddle approxi-
mately one-third of its full range.
To lower the saddle:
Slowly turn the jack handle counterclockwise.
If you need help with the Model H8091, call our
Technical Support line at: (570) 546-9663.
COPYRIGHT © DECEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JC8822 PRINTED IN CHINA
Download from Www.Somanuals.com. All Manuals Search And Download.
H8091 Main Parts Breakdown
��
��
��
��
�
��
��
��
�
��
��
��
��
��
��
��
��
�
��
��
��
�
��
��
��
�
��
��
��
�
��
��
��
��
��
�
��
��
�
�
�� ��
��
��
��
��
��
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
PR09M
PW13M
EXT RETAINING RING 20MM
FLAT WASHER 20MM
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
PH8091014 HEX NUT M16-1.75
PH8091024 LINKING SHAFT
PH8091025 SPECIAL BOLT (LEFT)
PH8091026 PUMP CORE PIN
PH8091027 HANDLE SOCKET
PH8091028 HANDLE SOCKET SCREW
PH8091029 LINKING BLOCK
PH8091030 COTTER PIN 4 X 47MM
PH8091031 PULL SPRING
2
3
PH8091003 FRONT WHEEL
PH8091004 SADDLE
4
5
PH8091005 SADDLE BASE
PH8091006 SADDLE BASE AXIS
6
7
PR06M
EXT RETAINING RING 16MM
8
PH8091008 LINK ROD
PH8091009 LINKING BOLT
PH8091010 SIDE FRAME
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PH8091032 PEDAL BASE
PLW04M
PN03M
LOCK WASHER 8MM
PH8091033 GEAR
HEX NUT M8-1.25
PH8091034 CYLINDER ASSEMBLY
PH8091035 HANDLE
PLW10M
LOCK WASHER 16MM
PH8091014 HEX NUT M16-1.75
PH8091036 RATCHET AXIS
PH8091015 REAR WHEEL ASSEMBLY
PW08M
FLAT WASHER 16MM
PR11M
PLW05M
PB25M
EXT RETAINING RING 25MM
LOCK WASHER 12MM
PH8091038 FLAT RATCHET
PLW06M
PN08M
PW01M
LOCK WASHER 10MM
HEX BOLT M12-1.75 X 25
HEX NUT M10-1.25
FLAT WASHER 8MM
PH8091019 LIFTING ARM
PH8091020 SPECIAL BOLT (RIGHT)
PH8091042 COTTER PIN 2MM X 12MM
PH8091043 MACHINE LABEL
PLW12M
LOCK WASHER 18MM
PH8091022 TORSION SPRING
The machine label warns about hazards and ways to prevent injury. The owner of the jack MUST
maintain the original location and readability of the label. If the label is removed or becomes
Download from Www.Somanuals.com. All Manuals Search And Download.
H8091 Hydraulic Pump Parts Breakdown
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
PH8091101
PH8091102
PH8091103
PH8091104
PH8091105
PH8091106
PH8091107
PH8091108
PH8091109
PH8091110
PH8091111
PH8091112
PH8091113
PH8091114
PH8091115
PH8091116
PH8091117
RAM ROD
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
PH8091118
BALL
RAM HEAD
RAM HEAD PIN
O-RING
PH8091119
PH8091120
PH8091121
PH8091122
PH8091123
PH8091124
PH8091125
PH8091126
PH8091127
PH8091128
PH8091129
PH8091130
PH8091131
PH8091132
PH8091133
SEAL WASHER
PLUG SCREW
OVERLOAD VALVE SCREW
WASHER
TANK NUT
O-RING
WIPER
CYLINDER
RESERVOIR
OIL FILL PLUG
O-RING RETAINER
O-RING
BACK-UP RING
O-RING
VALVE BLOCK
LEFT PLUNGER
BALL - BOTTOM
BALL - TOP
O-RING
GEAR RETAINING NUT
O-RING
PLUG SCREW
BALL
RELEASE VALVE ASSEMBLY
ACTUATOR
RIGHT PLUNGER
SPRING
GUIDE PLATE
Download from Www.Somanuals.com. All Manuals Search And Download.
|