Grizzly Automobile Accessories H6162 User Manual

MODEL H6162  
TRAILER SCREW JACK  
2000 LB.  
INSTRUCTION SHEET  
To reduce the risk of property damage,  
serious personal injury, or death when using  
this jack, take the following precautions:  
Refer to your trailer owner's manual to  
verify the Trailer Net Weight does not  
exceed the maximum trailer jack load  
rating of 2000 lbs.  
During installation, do not place any  
part of your body under the trailer  
tongue. Only support the trailer tongue  
with jack stands rated for more than the  
tongue weight of your trailer.  
figure 1. Model H6162.  
Only use this trailer jack on a hard,  
level surface capable of sustaining the  
load.  
Always block trailer wheels when using  
this trailer jack.  
Do not modify this trailer jack.  
Never allow children to play with or near  
the trailer jack while it is supporting the  
trailer.  
Never work under a trailer that is  
supported only by a trailer jack.  
Periodically inspect the jack fasteners,  
frame, and welds for looseness, cracks,  
or other damage. Do not use the jack if  
there is a problem.  
Never tow a trailer with the jack in the  
"Down" position, and be sure to lock  
the jack in the "Up" position before  
towing the trailer.  
Always make sure that the trailer hitch  
receiver is fully connected and properly  
locked to the ball hitch before retracting  
this trailer jack.  
Introduction  
The Model H6162 Trailer Screw Jack is designed  
to be mounted to the tongue of a trailer with a  
tongue weight less than 2000 lbs. The jack has 10  
inches of vertical travel, allowing the trailer tongue  
to be raised and lowered as needed. The mount-  
ing plate allows the jack assembly to swing out of  
the way and lock in place when it is not in use for  
safer towing.  
Specifications  
Maximum Load......................................2000 lbs.  
Retracted Height (Foot to Pivot Center)......1014  
"
"
Extended Height (Foot to Pivot Center).....2014  
Vertical Travel ................................................10"  
Mounting Plate Size ..................................4" x 5"  
Foot Size ...................................................5" x 7"  
Weight .......................................................12 lbs.  
CoPyRigHT © noVEMBER, 2008 By gRizzLy induSTRiaL, inC.  
WARNINg: NO PORTION Of THIS MANUAL MAy BE REPRODUCED IN ANy SHAPE  
OR fORM WITHOUT THE WRITTEN APPROvAL Of gRIzzLy INDUSTRIAL, INC.  
#JB11236 PRinTEd in CHina  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Swing Sets 1522 User Manual
Grizzly Drill H8110 User Manual
Haier Paint Sprayer DW12 CBE6 User Manual
Harman Kardon Speaker System HKTS 15 User Manual
Harman Kardon Stereo Receiver AVR 225 User Manual
Hawking Technology Network Router Wireless G Router User Manual
HP Hewlett Packard Personal Computer 355856 001 User Manual
HP Hewlett Packard Personal Computer Business PC User Manual
iHome Clock Radio ZN9 User Manual
IKEA Oven IBS550PWS00 User Manual