Greenway Home Products Indoor Fireplace MEF2822CWG User Manual |
eLeganT eLecTrIc FIrePLace
with corner option
FoYer ÉLÉganT
avec coin facultatif
chIMenea eLeganTe
con opción para poner en rincon
Assembly Instructions
Instructions d'assemblage
Instrucciones de montaje
W
À
S
YEAR
ANNÉE
AÑO
1
MEF2822CWG
save These InsTrucTIons
conserver ces InsTrucTIons
guarde esTas InsTruccIones
REV04
Download from Www.Somanuals.com. All Manuals Search And Download.
GET REAdy To sTART
step 1
step 2
Before assembly, use scissors to unwrap the parts from the packaging. DO NOT use
a box cutter or exacto-knife as you may cut into the mantel pieces inside the box and
damage the finish. Check for the hardware bag which is red and located inside the
packaging, taped to the top box. Be sure you DO NOT discard any pieces.
step 1
Locate the base and place it on the floor. Do not put it up against the wall at this point
in the assembly, as you need to get in behind the mantel to insert several wingnuts, lock
washers and firebox screws.
step 2
Locate the left side panel and the left front panel. Facing the front of the base, take the
left side panel, positioning it so the holes in the blocks on the bottom line up with the
holes on the base. Position the left front panel next to the left side panel, lining up the
holes in the blocks with the holes on the base. Attach the left front and side panel to
the base by inserting and tightening 1 wingnut and 1 lock washer to each piece. Attach
the left side and front panels together by inserting and tightening 3 wingnuts and 3 lock
washers.
step 4
step 3
Repeat Step 2, but with the right side panel and the right front panel.
step 4
Locate the lower facing panel and the firebox shelf. Attach the lower facing panel by
placing the granite side to the front then line up the holes on each side and insert 1
wingnut and 1 lock washer into each. Place the firebox shelf in behind, right up against
the lower facing panel.
step 5
step 5
step 6
Locate the granite upper facing panel that will be attached to the left and right legs and
will sit above the firebox. Position this panel with the granite side facing the front of
the mantel. Line up the holes on each side and insert and tighten 1 wingnut and 1 lock
washer on each side.
step 6
Get your assistant and locate the top of your mantel. This top is very heavy. It will take
2 people to lift and position it in place. Ensure the top goes over the positioning guide
located on the header. The top must go over this guide to be positioned correctly. Line up
the holes on the top of the mantel, insert and tighten 5 wing nuts and lock washers.
Download from Www.Somanuals.co2m. All Manuals Search And Download.
step 7
step 7
If you are using this mantel in a corner application, locate the triangular piece of wood
which attaches to the mantel to create the corner unit. You must attach this piece for
all corner applications. Slide the corner bottom support into the channel located at the
middle of the back of the hearth base. Place the top corner attachment on the floor
upside down. Protect it from damage. Attach the corner upright support to the corner
attachment by lining up the hole in the corner upright with hole in the corner top insert
with 1 nut and 1 lock washer. Simply take the triangle and slide the brackets with the
holes onto the pins which are already attached to the mantel. Once the triangle is
attached, push it up so it is level with the mantel and lock it into place. To lock it into
place simply turn the horizontal wooden blocks attached to the underside of the mantel
into a vertical position to support the weight of the corner triangle. Now attach the corner
bottom support to the corner upright support by insert and tightening 1 wing and 1 lock
washer.
step 8
Take your electric firebox out of its packaging and position it between the 2 legs of the
mantel. Once you are close to the wall, plug the firebox into the nearest outlet.
The firebox comes with 3 metal brackets and 20 black screws. These metal brackets
must be attached to both the sides of the firebox and the mantel to ensure that your
firebox does not move around as you use it. 2 of the brackets have 2 large holes on one
side. These large holes line up with 2 screws on the side of the firebox. The other screws
provided must be inserted into the holes at the other end of the bracket and into the
firebox. The other side of each bracket attaches to the mantel.
step 8
The 3rd bracket has no holes on 1 side. That side should go up against the firebox top
but should not be attached as the heater sits right underneath the bracket. Only the
mantel side should be attached.
If you have any questions about the firebox please reference the installation instructions
that come with the firebox. Please reference the Quick Tips section of that instruction
manual.
noTE: some fireboxes come with pre-attached trims
step 9
You are now ready to position your mantel against the wall. This step requires 2 people
to move the unit.
Anti-tipping device
step 9
At this point you must attach the anti-tipping device to your mantel and your wall. This
device is a safety feature that will prevent your mantel from tipping over if a weight is
applied which can unbalance the unit.
Download from Www.Somanuals.co3m. All Manuals Search And Download.
WARRAnTy
Greenway Home Products is pleased to offer in-home warranty repairs. Please refer to your Firebox Use and Care Guide for warranty
information on your Firebox.
do noT RETuRn THis pRoduCT To THE sToRE:
Please contact Customer Service at: 1-866-253-0447
Monday to Thursday from 8:30AM to 5:00PM (EST), Friday from 8:30AM to 4:00PM (EST)
Email: support@greenwayhp.com
Canada:
usA:
400 Southgate Dr., Guelph, Ontario, Canada, N1G 4P5
6507 Fairfield Dr., Northwood,Ohio, USA, 43619
limited Warranty definitions:
Greenway Home Products:
(Greenway)
Mantel:
Manufacturer.
Mantel manufactured by Greenway Home Products.
Purchaser:
Distributor:
Warranty Card
Purchaser of the Mantel
Facility authorized to sell Greenway Home Products.
Greenway Home Products Limited Warranty Registration Card identifying the Purchaser and product model.
Greenway limited Warranty:
Greenway warrants to the Purchaser that the Mantel is free from defects in material and workmanship, under normal use and service,
for 1 year (1 year limited parts) from the date of purchase.
All warranty repairs must be preauthorized by Greenway Home Products. Greenway will, at its’ option, replace or repair free of charge
any defective part, which the Purchaser shall notify their Distributor or Greenway Home Products within the warranty period. The
obligation of Greenway Home Products under this warranty, is expressly limited to such replacement or repairs.
The provisions of this limited warranty shall not apply to the following:
1. Accidents.
2. Unauthorized repairs or alterations.
3. Normal maintenance.
4. Changes made to other units manufactured after this mantel was manufactured.
5. Incidental damages caused by failure of the mantel such as inconvenience or loss of use.
6. Improper installation.
The provisions of this limited warranty shall not apply to deterioration due to wear and exposure beyond the following limitations:
1. For 180 days from the date of purchase for exterior finished surfaces.
Due to the properties of natural wood, Greenway Home Products makes no warranty against mineraling of wood components.
Greenway limited Warranty is void unless the following conditions are adhered to:
1. Warranty registration must be completed and returned to a Greenway Home Products.
2. All warranty repairs must be preauthorized by a Greenway repair facility.
3. Greenway reserves the right to inspect defective parts that have been replaced under warranty. Dealer is expected to hold
defective parts for 60 days.
4. Only parts and accessories and other material, available through Greenway Home Products are to be used in the performance
of warranty service.
5. Purchasers are responsible for presenting/notifying their Distributor as soon a problem exists. The warranty repairs should be
completed in a reasonable amount of time from the date of authorization. Not to exceed 30 days past notification.
This limited warranty is expressly in lieu of any other expressed or implied warranty, including any implied warranty or merchantability
or fitness for a particular purpose and of any obligations or liabilities on Greenway Home Products which neither assumes nor
authorizes any other person to assume for it any other liability in connection with the Mantel
manufactured by it.
The warranty is null and void if used in commercial or industrial applications.
Download from Www.Somanuals.co4m. All Manuals Search And Download.
|