Wide Area Walk Mower
Owner/Operator Manual
Manuel du Propriétaire/Utilisateur
Models
911411 – WAW 34
01326300 12/09
Printed in USA
ENGLISH
FRENCH
Download from Www.Somanuals.com. All Manuals Search And Download.
• Record Unit Model and Serial numbers
here:
DEALER DELIVERY
Dealer should:
1. Check that all assembly and
adjustments have been properly
completed.
2. Fill out Original Purchaser Registration
Card and return the card to Gravely.
• Record Engine Model & Serial numbers
here:
3. Explain Gravely Limited Warranty Policy.
4. Explain recommended lubrication and
maintenance. Advise customer on
adjustments. Remind customer to
change oil in 4 cycle engine crankcase
after first five (5) hours of operation.
5. Instruct customer on controls and
operation of unit. Discuss and
emphasize the Safety Rules. Give
customer Owner/Operator, Parts, and
Engine manuals. Advise customer to
thoroughly read and understand them.
PRODUCT REGISTRATION
The Gravely dealer must register the product
at the time of purchase. Registering the
product will help the company process
warranty claims or contact you with the latest
service information. All claims meeting
requirements during the limited warranty
period will be honored, whether or not the
product registration card is returned. Keep a
proof of purchase if you do not register your
unit.
DISCLAIMER
Gravely reserves the right to discontinue,
make changes to, and add improvements
upon its products at any time without public
notice or obligation.The descriptions and
specifications contained in this manual were
in effect at printing. Equipment described
within this manual may be optional. Some
illustrations may not apply to your unit.
Customer Note: If the Dealer does not
register your product, please fill out, sign and
return the product registration card to Gravely
UNAUTHORIZED REPLACEMENT
PARTS
Use only Gravely replacement parts.
Replacing any part on this vehicle with
anything other than a Gravely authorized
replacement part may adversely affect the
performance, durability, or safety of this unit
and may void the warranty. Gravely disclaims
liability for any claims or damages, whether
warranty, property damage, personal injury or
death arising out of the use of unauthorized
replacement parts. To locate your nearest
the internet.
GB - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
CAUTION: POTENTIALLY
HAZARDOUS SITUATION! If not
avoided, MAY RESULT in minor or
moderate injury. It may also be
used to alert against unsafe
practices.
WARNING: This cutting machine
is capable of amputating hands
and feet and throwing objects.
Failure to observe the safety
instructions in the manuals and
on decals could result in serious
injury or death.
Slopes are a major factor related
to slip and fall accidents.
Operation on all slopes requires
extra caution.
NOTATIONS
NOTE: General reference information for
proper operation and maintenance practices.
IMPORTANT: Specific procedures or
information required to prevent damage to
unit or attachment.
Tragic accidents can occur if the
operator is not alert to the
presence of children. Never
assume that children will remain
where you last saw them.
PRACTICES AND LAWS
Practice usual and customary safe working
precautions, for the benefit of yourself and
others. Understand and follow all safety
messages. Be alert to unsafe conditions and
the possibility of minor, moderate, or serious
injury or death. Learn applicable rules and
laws in your area.
Gasoline is extremely flammable
and the vapors are explosive,
handle with care.
Stop unit and engine and allow
moving parts to stop before
leaving operator’s position.
REQUIRED OPERATOR
TRAINING
Original purchaser of this unit was instructed
by the seller on safe and proper operation. If
anyone other than the original purchaser will
use the unit, ALWAYS provide this manual
and any needed safety training before
operation.
SAFETY ALERTS
Look for these symbols to point
out important safety precautions.
They mean:
Attention!
Personal Safety Is Involved!
Become Alert!
Obey The Message!
The safety alert symbols above and signal
words below are used on decals and in this
manual.
Read and understand all safety messages.
DANGER: IMMINENTLY
HAZARDOUS SITUATION! If not
avoided, WILL RESULT in death or
serious injury.
WARNING: POTENTIALLY
HAZARDOUS SITUATION! If not
avoided, COULD RESULT in
death or serious injury.
GB - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY DECALS AND
LOCATIONS
ALWAYS replace missing or damaged safety
decals. Refer to Figure 2 for safety decal
locations.
+
2
1
05365400A
1
3
5
4
Figure 2
1. DANGER!
TO AVOID SERIOUS INJURY OR DEATH
Do not operate mower unless
guards are in operating position
or entire bagger is attached.
Read the operator’s manual.
OL1812
Keep safety devices (guards,
shields, switches, etc.) in place
and working.
OL1801
Keep children and others away
from unit while operating.
•
•
Go across slopes, not up and down.
Look down and behind before and
while moving backward.
OL4370
•
•
Do not park on a slope unless
chocked or blocked.
Never direct discharge toward
other people. Thrown objects can
cause injury.
Do not allow operation of machine by
untrained personnel.
OL0910
GB - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. WARNING!
4. DANGER!
KEEP HANDS AND FEET AWAY
Do not operate mower unless guards are in
operating position or bagger is attached.
Read the operator’s manual.
5. WARNING!
OL1801
OL4370
OL0910
Always stand clear of discharge
area.
Keep children and others away
from unit while operating.
OL1814
Do not operate mower unless
bagger is attached or guards
are in operating position.
Never direct discharge toward
other people. Thrown objects can
cause injury.
OL1815
SAFETY RULES
If unit is to be used by someone other than
original purchaser; loaned, rented or sold,
ALWAYS provide this manual and any
needed safety training before operation.
Shut off engine, remove key, and
read manual before you adjust or
repair unit.
Learn applicable rules and laws in your area,
including those that may restrict the age of
the operator.
OL1812
Wear appropriate hearing
protection.
Read, understand and follow all safety
practices in Owner/Operator Manual before
beginning assembly. Failure to follow
instructions could result in personal injury
and/or damage to unit.
3. DANGER! ROTATING PARTS
If the operator or the mechanic cannot read
the manual, it is the owner’s responsibility to
explain it to them. Only the user can prevent
and is responsible for accidents or injuries
occurring to themselves, other people or
property.
Always keep feet and hands
away from rotating parts.
OL1809
ALWAYS disconnect wire from spark plug
before assembly. Unintentional engine start
up can cause death or serious injury.
Always stand clear of discharge
area. Do not direct discharge
toward other people.
Complete a walk around inspection of unit
and work area to understand:
OL1810
•
•
•
work area
your unit
all safety decals.
Keep people away from unit
while operating.
OL18111
Clear work area of stones, sticks, wire and
foreign objects which might be picked up and
thrown. Tall grass can hide obstacles.
Shut off engine, remove key,
and read manual before you
adjust or repair unit.
Know the work area. Stay alert for holes,
rocks, rough terrain and hidden hazards.
OL1812
Keep away from drop-offs, ditches, or
embankments that could cause operator to
lose footing or control of unit.
NO STEP! Always keep feet
away from rotating parts.
ALWAYS be aware of traffic when operating
along streets or curbs.
OL1813
Keep work area clear of all persons, children
and pets.
GB - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep children out of the work area and under
the watchful care of a responsible adult.
DO NOT tilt mower when starting it.
Keep feet away when starting engine.
ALWAYS operate unit when there is good
visibility and light.
DO NOT start the engine or operate mower
without side discharge cover or side
discharge deflector installed.
DO NOT mow wet grass.
ALWAYS be sure of your footing. Keep a firm
hold on handlebar. Walk, NEVER run.
Never leave a running unit unattended.
Take all possible precautions when leaving
unit unattended.
Engine/blade control feature on mower stops
engine and blade within 5 seconds whenever
operator releases PTO lever. Check this
feature frequently. If feature fails to operate,
disconnect spark plug wire and adjust or have
it repaired before using unit.
ALWAYS shut off engine and disconnect
spark plug wire to prevent accidental starting
or unauthorized use.
Stop engine if anyone enters the work area.
NEVER attempt to make any adjustments to
unit while engine is running (except where
specifically recommended). Stop engine and
wait for all moving parts to stop before
servicing.
Only trained adults may operate or service
unit. Training includes actual operation. The
owner is responsible for training users.
NEVER operate after or during the use of
medication, drugs or alcohol. Unit requires
complete and unimpaired attention.
DO NOT make cutting height wheel
adjustments while the engine is running.
NEVER allow children to use or service
mower.
If you strike an object, or if equipment
vibrates abnormally, stop engine at once, wait
for moving parts to stop and disconnect wire
from spark plug. Repair any damage before
restarting unit.
ALWAYS keep hands and feet away from
rotating parts. Rotating parts can cut off body
parts.
ALWAYS keep hands away from pinch points.
Stop engine before removing and emptying
grass bag.
Fumes from engine exhaust can cause death
or serious injury. DO NOT run engine in an
enclosed area.
When mulching or bagging, ALWAYS install
discharge cover.
ALWAYS protect eyes, face, and body with
adequate safety gear and protective clothes.
Wear sturdy footwear, gloves, a hard hat and
safety goggles or safety glasses with side
shields while operating mower.
When side discharging, ALWAYS install side
discharge deflector.
ALWAYS shut off engine, allow blade to stop
and disconnect spark plug wire before
clearing clogs or cleaning unit.
Wear appropriate hearing protection.
Check grass bag for wear, damage, and/or
deterioration. Replace only with Gravely
original equipment replacement parts for
safety.
NEVER operate mower barefoot or when
wearing open sandals or canvas shoes.
NEVER wear loose clothes, long hair or
jewelry that may get caught in rotating parts.
To reduce fire hazard and overheating, keep
equipment free of grass, leaves, debris or
excessive lubricants.
ALWAYS stand clear of discharge when
operating unit.
NEVER direct discharge toward bystanders.
Operator is responsible for bystander safety.
DO NOT touch hot parts. Allow parts to cool.
Use extra care when approaching blind
corners, shrubs, trees, or other objects which
may obscure vision.
DO NOT mow at too fast a rate. DO NOT
change engine governor setting or over-
speed the engine.
Keep safety devices or guards in place and
functioning properly. NEVER modify or
remove safety devices.
Do not operate mower on gravel or loose
material such as sand. Stop mower when
crossing drives, walks, or roads to prevent
damage or injury from thrown objects.
Read, understand, and follow all instructions
in the manual and on the machine before
starting. Understand:
•
•
•
How to operate all controls
The functions of all controls
How to STOP in an emergency.
DO NOT pull mower backwards unless
absolutely necessary. Look down and back,
especially for small children, before and while
moving backwards.
DO NOT attempt to start your engine until
you know what the controls do and how they
work.
GB - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
On self-propelled models, releasing wheel
drive control must stop mower’s forward
movement. If this feature fails to operate,
disconnect spark plug wire and repair before
using unit.
Allow engine to cool several minutes before
removing fuel cap.
DO NOT overfill. Allow about 1/4" (6 mm) of
tank space for fuel expansion.
Replace gasoline tank cap securely and
clean any spilled fuel before starting engine.
On self-propelled models, wheel drive must
be disengaged when starting engine.
If fuel is spilled on clothing, change clothing
immediately.
DO NOT operate on steep slopes.
NEVER leave unit unattended on a slope.
Chock wheels if parking on a slope.
NEVER store fuel inside where there is an
open flame, such as a water heater.
Mow across the face of slopes, never up and
down. Be especially cautious when changing
direction on slopes.
ALWAYS drain fuel outdoors away from
ignition sources.
ALWAYS shut off engine when transporting
unit on a truck or trailer.
This product is equipped with an internal
combustion engine. DO NOT use on or near
any unimproved, forest or brush covered land
unless the exhaust system is equipped with a
spark arrestor meeting applicable local, state
or federal laws. A spark arrestor, if used,
must be maintained in effective working order
by the operator. See your Gravely Dealer or
engine manufacturer’s service center.
Avoid Electric Shock. DO NOT disconnect
wire from spark plug while engine is running.
Do NOT put battery in fire or mutilate.
Explosive Gases!
NO flames, NO sparks, NO smoking, near
battery.
Poisonous battery fluid contains sulfuric acid.
Contact with skin, eyes or clothing can cause
severe chemical burns.
Emission Control System
Certification Label
ALWAYS wear safety glasses and protective
gear near battery.
NOTE: Tampering with emission controls and
components by unauthorized personnel may
result in severe fines or penalties. Emission
controls and components can only be
adjusted by EPA and/or CARB authorized
service centers. Contact your Gravely
Equipment Retailer concerning emission
controls and component questions.
ALWAYS keep batteries out of reach of
children.
Battery posts, terminals and related
accessories contain lead and lead
compounds, chemicals known to the State of
California to cause cancer and reproductive
harm. Wash hands after handling.
Fuel is highly flammable and its vapors can
explode. ONLY use approved fuel containers.
Charge batteries in an open, well-ventilated
area, away from spark and flames. Unplug
charger before connecting or disconnecting
battery. Wear protective clothing and use
insulated tools.
•
•
•
•
NO Smoking!
NO Sparks!
NO Flames!
Allow engine to cool before filling fuel
tank.
Accidental engine start up can cause death or
serious injury. Except where specifically
recommended, ALWAYS stop engine, wait for
moving parts to stop, allow parts to cool and
disconnect spark plug wire before inspecting,
servicing, adjusting or repairing unit.
Never fill containers inside a vehicle or on a
truck or trailer bed with a plastic liner. Always
place containers on the ground away from
your vehicle before filling.
When practical, remove gas-powered
equipment from the truck or trailer and refuel
it on the ground. If this is not possible, then
refuel such equipment on a trailer with a
portable container, rather than from a
gasoline dispenser nozzle.
Keep mower free of grass, leaves, or other
debris build-up.
Keep equipment in good condition.
Maintain or replace safety and instruction
labels, as necessary.
Keep the nozzle in contact with the rim of the
fuel tank or container opening at all times until
fueling is complete. Do not use a nozzle lock-
open device.
Follow engine manufacturer’s safety
instruction when servicing engine.
Check all hardware at regular intervals,
especially blade attachment bolts. Keep all
hardware properly tightened.
Check fuel supply before starting engine.
DO NOT fill gasoline tank indoors, when
engine is running, or while engine is hot.
GB - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
An extension spring, when extended, stores
energy and can be dangerous. Always use
tools specifically designed for installing or
removing an extension spring. Always
compress or extend springs slowly.
Use only replacement parts designed for your
unit. See your Gravely Dealer.
Allow engine to cool before storing in any
enclosure.
ALWAYS clean unit before extended storage.
See engine manual for proper storage.
Before tipping unit, remove fuel.
Use extra care when loading or unloading
unit onto trailer or truck.
DO NOT store unit inside a building with fuel
in the fuel tank where any ignition sources
are present.
Ensure all wheel blocks, jack stands and tie
downs will support unit during maintenance.
Use only accessories which have been
approved by Gravely and are properly
installed.
Replace worn-out mufflers immediately.
Continued use could result in fire or
explosion.
Use only accessories or attachments that are
designed for your unit and that can be used
safely on your terrain.
Sharp edges can cut or amputate fingers or a
hand. Wrap blade or wear sturdy gloves to
service.
Check attachments frequently and replace
worn or damaged components with
manufacturer’s recommended parts.
Only replace blades. NEVER straighten or
weld blades.
ASSEMBLY
CARTON CONTENTS
CAUTION: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
1
2
1. Mower Unit
2. Literature Pack with
Installation Hardware
Figure 3
GB - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Check engine crankcase oil level. See
engine manual.
6. Connect the battery ground cable (–) to
the negative battery terminal.
7. Fill fuel tank. See FILLING THE FUEL
TANK on page 14.
NOTE: After the first twenty-five hours of
operation, belt wear may require the PTO
clutch cable and the drive control cables to be
adjusted. See Forward/Reverse Drive
Controls on page 19 and Wheel Drive Belts
on page 20.
ASSEMBLY
1. Remove all packing materials and straps
from unit.
2. Remove one pair of nuts and bolts from
the handlebars.
3. Rotate the handlebar into the operating
position and connect the two braces to
the handlebars.
4. Replace the nuts removed in step 1 and
then tighten all four nuts.
1
IMPORTANT: Do not operate the unit without
understanding how the controls work and
how to safely start, stop and operate the unit.
1
2
2
3
1. Handlebar Folded Down
2. Nut
3. Brace
Figure 4
1. Battery Cover
2. Negative (–) Battery Cable
Figure 5
GB - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FEATURES
+
2
1
5
05365400A
15
13
14
11
10
4
12
3
6
7
9
8
7
Figure 6
1. PTO Clutch Lever
2. Parking Brake Release Lever
3. Forward Drive Control
4. Reverse Drive Control
5. Handlebars
6. Fuel Tank and Cap
7. Height Adjustment Spacers
8. Muffler
9. Oil Fill/Dipstick
10. Air Filter
11. Fuel Filter
12. Belt Cover
13. Ignition Key
14. Safety Start Switch
15. Throttle/Choke Control
GB - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
CONTROLS AND FEATURES
See Figure 6 for locations.
PTO Disengaged: Mower blades
stop rotating.
WARNING: Improper operation
can lead to injury. Learn what the
controls do and how they work.
Thoroughly read and understand
entire Operator Manual.
PTO Engaged: Hold down the lock
lever and then hold clutch lever
against handlebar to engage the
clutch and start the mower blades.
CAUTION: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
CUTTING HEIGHT ADJUSTMENT
Parking Brake Lever (Right Hand
Lever)
Hold the parking brake lever against the
handlebar to release the wheel lock pin and
operate the unit.
DANGER: Avoid injury from
rotating blade.
ALWAYS shut off engine before
adjusting cutting height.
Release the parking brake lever to engage
wheel lock pin and prevent the unit from
rolling forward or backward.
Cutting Height Settings Chart
IMPORTANT: The wheel lock pin prevents
the unit from rolling forward or backward. The
unit can still pivot from side to side.
Spacers
Below Caster
Arms
Cut Grass Length
0
1
2
3
4
5
6
1-3/4" (44.4 mm)
2" (50.8 mm)
Parking Brake Engaged: Unit will
not roll forward or backward.
2-1/2" (63.5 mm)
2-3/4" (69.8 mm)
3" (76.2 mm)
3-1/4" (82.6 mm)
3-1/2" (88.9 mm)
NOTE: Placing the spacers above the caster
arm lowers the deck and decreases cutting
height. Placing the spacers below the caster
arm raises the deck and increases the cutting
height.
Parking Brake Disengaged: Hold
lever against handlebar to operate
the unit.
To change cutting height, remove the lock pin
from the top of the caster fork. Raise the
caster arm high enough to expose the flats
and lower pin hole on the caster fork spindle.
Insert the lock pin into the lower hole to
support the arm while adjusting the cutting
height spacers (Figure 7).
PTO Clutch Lever (Left Hand Lever)
Hold down the lock lever and then squeeze
the PTO clutch lever against the handlebar to
engage the clutch and start the mower
blades.
Release the clutch lever to stop the blades.
NOTE: The lock lever prevents the PTO
clutch lever from being squeezed
accidentally. It will engage each time you
release the clutch lever.
GB - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock Pin
Remove the
spacers from
the stack.
Flats
Spacers
Secure spacers
above the
the lock pin.
Figure 7
Align the open ends of the spacers with the
flats on the caster spindle and remove the
spacers one at a time until enough are left at
the bottom for the desired cutting height.
Remove the lock pin while supporting the
caster arm. Lower the arm on top of the
remaining spacers. Put the spacers that were
removed in the caster spindle above the
support tube as shown (Figure 8).
Reinstall the lock pin into the top hole and flip
over the lock ring to secure the remaining
spacers and pin.
NOTE: Set both wheels at the same height
for a level cut.
NOTE: Axle positions are set at the
factory. There should be no need to
change the axle position in the caster
in normal use or maintenance.
Figure 8
GB - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop:
Forward Drive Control
(Lower Right Hand Control)
Release reverse drive control.
CAUTION: Unit will move at
engine start if the wheel drive
controls are engaged. ALWAYS
release the wheel drive controls
before starting unit.
Reverse Drive
Control
NOTE: Engine must be running for wheel
drive to propel unit.
To drive forward:
STOP
Hold the parking brake lever against the
handlebar and slowly squeeze and hold the
forward drive control. Hold the forward drive
control against the handlebar for fastest
speed.
GO
OM1240
FILLING THE FUEL TANK
To stop:
Release forward drive control.
To add fuel to fuel tank:
1. Put unit in open or well-ventilated area.
2. Stop engine and allow to cool.
3. Clean fuel cap and surrounding area.
4. Remove cap.
Parking Brake
Lever
IMPORTANT: See engine manual for correct
type and grade of fuel.
5. Fill fuel tank. (see SPECIFICATIONS on
page 26 for tank capacity.)
GO
6. Replace fuel cap and tighten.
7. ALWAYS clean any spilled fuel.
Forward Drive
Control
GASOLINE
STOP
IMPORTANT: ALWAYS use gasoline that
meets the following guidelines:
OM1240
•
•
Clean, fresh gasoline.
Reverse Drive Control
(Side Right Hand Control)
A minimum of 87 octane/87 AKI (91
RON). High altitude use may require a
different octane. Consult your engine
manual.
Gasoline with up to 10% ethanol
(gasohol) or up to 15% MTBE (methyl
tertiary butyl ether) is acceptable.
Use of any gasoline other than those
approved above may void the engine
warranty. If the pumps are not marked
for the content of alcohol or ethers,
check ethanol and MTBE levels with
the fuel supplier.
CAUTION: Unit will move at
engine start if the wheel drive
controls are engaged. ALWAYS
release the wheel drive controls
before starting unit.
•
•
To drive in reverse:
Hold the parking brake lever against the
handlebar and slowly squeeze and hold the
reverse drive control. Hold the reverse drive
control against the handlebar for fastest
speed.
•
•
Do not modify the fuel system to use
different fuels.
Never mix oil and gasoline.
NOTE: All gasoline is not the same. If the
engine experiences starting or performance
problems after using a new gasoline, switch
to a different fuel provider or fuel brand.
GB - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT: Excessively oxygenated or
reformulated fuels (fuels blended with
alcohols or ethers) can damage the fuel
system or cause performance problems. If
any undesirable operating problems occur,
use a gasoline with a lower percentage of
alcohol or ether.
Electric Start
1. Check each item under Before Each
Use in the MAINTENANCE SCHEDULE
on page 16.
2. Place throttle control in the choke
position. Once the engine has started,
place throttle in the high speed detent.
3. Hold down the safety switch on the dash
panel and turn the ignition key to the
Start position.
Fuel Stabilizer
Gasoline left in the fuel system for extended
periods without a stabilizer will deteriorate,
resulting in gum deposits in the system.
These deposits can damage the carburetor
and the fuel hoses, filter and tank. Prevent
deposits from forming in the fuel system
during storage by adding a quality fuel
stabilizer to the fuel. Follow the
4. Release the key and the safety switch
once engine starts.
Shut Off
1. Release the PTO clutch lever, the
parking brake lever, and the wheel drive
controls and allow unit to stop
completely.
2. Turn the ignition key to the "OFF"
position.
recommended mix ratio found on the fuel
stabilizer container.
EMERGENCY STOPPING
Mowing Tips
Cut grass when it is dry.
Keep mower blades sharp.
NOTE: The engine will run after the clutch
and parking brake levers are released.
ALWAYS shut off the engine with the ignition
key and remove the key before leaving the
operator’s position.
Do not set cutting height too low. For tall
grass, mow twice.
To stop the mower in an emergency:
Do not mow too fast.
1. Release the PTO clutch lever and the
parking brake lever.
2. Turn the ignition key to the "OFF"
position.
Mow with engine at full throttle. Discharge
clippings into areas already cut.
Vary cutting pattern with each mowing.
3. Allow all moving parts to stop before
leaving operator’s position.
NOTE: To prevent dirt and grass from
collecting on mower pan, avoid operating
over bare ground with only patches of grass.
STARTING AND SHUT OFF
Mulching Tips
For best mulching performance, cut no more
than 1 inch (2.54 cm) of grass per cutting.
WARNING: Improper operation
can lead to injury. Learn what the
controls do and how they work.
Thoroughly read and understand
entire Operator Manual.
See Figure 6 for all Controls and Features.
NOTE: Start engine on a level surface that is
free of debris.
GB - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
CHECK PTO CLUTCH LEVER
CONTROL
The engine and blade must stop within
5 seconds after releasing the control. If the
blade continues to run, adjust or repair
control immediately.
CAUTION: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
Gravely Dealers will provide any service,
parts or adjustments which may be required
to keep your unit operating at peak efficiency.
Should engine require service, contact a
Gravely Dealer or an authorized engine
manufacturer's service center.
NOTE: If the blade makes a scraping sound
when the PTO lever is released, the blade
brake is faulty. Contact a Gravely Dealer
immediately for repair.
CHECK WHEEL DRIVE CONTROL
MAINTENANCE SCHEDULE
The unit must stop quickly and completely
when the drive controls are released. Adjust
or repair if necessary. See Forward/Reverse
Drive Controls on page 19.
NOTE: Some working conditions (heavy
loads, high ambient temperatures, dusty
conditions, or airborne debris) may require
more frequent service.
See engine manual for further maintenance
and troubleshooting information.
CLEAN UNIT
Before each use clean unit, muffler and
engine surfaces of debris, oil or fuel spills to
ensure proper cooling and prevent fires.
MAINTENANCE
SCHEDULE
NOTE: Do not spray the unit with water,
especially when the unit is warm from
operation. Water can seep into bearings and
damage them.
Before
Each
Use
25
50
100
hrs
Service
Performed
hrs
hrs
Check PTO
Clutch
•
CHECK ENGINE OIL
IMPORTANT: Maintain proper oil level at all
times or engine damage will result.
Check Wheel
Drive Control
•
Check the level of the engine crankcase oil
before each use.
Clean Unit
•
•
Check Engine
Oil
Make sure engine is level when checking oil.
See engine manual for instructions.
Check Mower
Blade
•
•
•
CHECK MOWER BLADE
See Figure 10.
Check Drive
Belts
Check blade mounting: blade must be secure
and torqued to 92 – 130 lbf-ft
(125 to 176 N•m).
Check
Fasteners
Check blade for nicks and dull cutting edges.
Sharpen if necessary.
Check Air
Cleaner
•
•
•
Check blade for rounded or broken ends,
thinned metal or other damage. Replace if
necessary.
Change
Engine Oil
•*
General
Lubrication
NOTE: Blades should be sharpened and
balanced professionally. Contact your
Gravely Dealer.
Check Spark
Plug
•
•
•
To remove blade:
1. Stop engine, wait for all moving parts to
stop, and disconnect spark plug wire.
2. Block blade to prevent rotation.
3. Remove mounting hardware and mower
blades from mower deck. See Figure 9.
Check Engine
Cooling
•
Check Muffler
After first 5 Hours of operation.
GB - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
To install blade:
DO NOT Sharpen to This Pattern
1. Install mower blades on mower deck
with mounting hardware.
2. Torque 5/8-inch nut to 92 to 130 lbf-ft
(125 to 176 N•m).
2
1
3. Connect spark plug wire.
3
1
DISCARD If More Than
1/2 in. (1.27 cm)
2
2
3
4
OT0792
3
4
Sharpen to This Pattern
1. Square Corner
2. Cutting Edge
3. Air Lift
1. Spindle
2. Blade
3. Washer
4. 5/8 in. Nut
4. Air Lift Erosion
Figure 9
Figure 10
Sharpen the Mower Blades
3. Check mower blade balance.
Slide mower blade on an unthreaded
bolt. A balanced blade should remain in
a horizontal position. If either end of
mower blade moves downward, sharpen
the heavy end until blade is balanced
(Figure 11).
CAUTION: DO NOT sharpen
mower blades while on unit. An
imbalanced mower blade will
cause excessive vibration and
eventual damage to unit. Check
mower blade balance before
reinstalling blades.
NEVER weld or straighten bent
blades.
Blade
1. Remove mower blade from unit.
Discard mower blade if:
•
More than 1/2 in. (1.27 cm) of metal is
removed.
•
•
Air lifts become eroded.
Blade is bent or broken.
Bolt
2. Sharpen mower blade by removing an
equal amount of material from each end
of mower blade. DO NOT change angle
of cutting edge or round the corner of the
mower blade.
OA0013
Figure 11
4. Install mower blade on unit.
5. Torque 5/8-inch nut to 92 to 130 lbf-ft
(125 to 176 N•m).
GB - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECK DRIVE BELTS
CHECK SPARK PLUG
Check drive belts and replace if worn or
damaged. See Wheel Drive Belts on page 20.
Spark plug should be replaced every 100
hours of operation or each year.
NOTE: Loose spark plug wire terminals can
cause sparking. Replace terminal if
damaged.
CHECK FASTENERS
Check all fasteners for proper tightness. Pay
special attention to blade hardware and all
guards, shields and safety devices.
CHECK ENGINE COOLING
CHECK AIR CLEANER
See engine manual for specific information.
WARNING: HOT SURFACES can
cause death or serious injury. DO
NOT TOUCH parts which are hot
from operation. ALWAYS allow
parts to cool.
CHANGE ENGINE OIL
IMPORTANT: Change engine crankcase oil
after first five (5) hours of operation. Then
change oil after every 25 hours of operation.
To prevent overheating, air must circulate
freely around the cooling fins, cylinder head
and block.
Refer to engine manual for instructions and
proper oil type.
Every 100 hours of operation or yearly (more
often if conditions require) remove blower
housing and clean cooling fins. See engine
manual for instructions.
IMPORTANT: Proper oil level must be
maintained at all times or engine damage will
result. DO NOT overfill. Be sure engine is
level when adding oil.
GENERAL LUBRICATION
CHECK MUFFLER
Check muffler for debris, cracks, wear, or
other damage.
The unit has sealed maintenance-free
spindles and transmission. The unit should
not require lubrication except for light oil or
grease at pivot points.
CAUTION: Replace worn-out
mufflers immediately. Continued
use could result in fire or
explosion.
GB - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE AND ADJUSTMENTS
Forward/Reverse Drive Controls
CAUTION: AVOID INJURY. Read
and understand the entire Safety
WARNING: If you cannot adjust
the controls so the unit drives
properly, immediately take the unit
to your local authorized dealer for
repairs.
section before proceeding.
PTO CLUTCH
WARNING: If you cannot adjust
the controls so the unit drives
properly, immediately take the unit
to your local authorized dealer for
repairs.
After new belts have been worn in or if the
drive seems to be losing power, the drive
control cable may need adjustment.
Adjust both drive controls the same way.
1. Loosen the lock nut on the drive lever.
2. Turn the cable adjuster to tighten or
loosen the cable.
3. Tighten the lock nut to hold the
adjustment.
4. Test the drive.
1. Test the PTO clutch adjustment.
With the clutch disengaged, the blade
brake pad should touch the upper pulley.
With the clutch engaged, the blade
brake pad should not touch the upper
pulley and the deck belt should be under
tension.
Unit should move forward when the
drive control is squeezed and it should
coast to a stop when the drive control is
released.
2. Loosen the lock nut on the cable
adjuster under the dash panel.
3. Turn the adjuster body to tighten or
loosen the clutch cable.
NOTE: There must be some slack in the
clutch cable with the clutch disengaged.
removed from the unit for clarity of the
illustration.
4. Tighten the lock nut to hold the
adjustment.
2
IMPORTANT: If you cannot adjust the PTO
clutch or if it fails to operate properly,
immediately take the unit to your Gravely
dealer for repair.
3
1
1
1. Cable
Adjuster
2. Lock Nut
Figure 13
2
1. Cable
Adjuster
2. Lock Nut
3. Check
Slack
Figure 12
GB - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: Check the wheel drive control
adjustment after the first 25 hours of use to
compensate for belt wear.
BELT REPLACEMENT
WARNING: AVOID INJURY.
ALWAYS block wheels, engage
parking brake and know all jack
stands are strong, secure and will
hold weight of unit during
maintenance.
Rear of Unit - Forward Drive Belt Routing
Wheel Drive Belts
1. Stop engine, remove key, wait for all
moving parts to stop and hot parts to
cool.
2. Raise and support the rear of the unit.
3. Remove the rear cover and disconnect
the neutral return springs from the spring
anchors.
4
2
1
Rear of Unit - Reverse Drive Belt Routing
Disconnect neutral return
springs from the spring anchors.
Figure 14
3
4. Remove the idler arm from the
transmission plate. See Figure 15.
5. Remove the forward drive belt from the
engine pulley and remove it from the
unit.
2
1
6. Remove the reverse drive belt from the
engine pulley and remove it from the
unit.
7. Route the new reverse belt through the
transmission idler arm and then install
belt on the engine pulley. See Figure 15.
8. Route the new forward belt through the
transmission idler arm and then install
belt on the engine pulley. See Figure 15.
1. Engine
Pulley
2. Idler Arm
3. Reverse
Drive Belt
4. Forward
Drive Belt
Figure 15
9. Install the idler arms on the transmission
plate and install the belts on the
transmission pulleys. See Figure 15.
10. Replace the rear cover.
11. Start the unit and test operation of the
drive system. Adjust the wheel drive
controls, if needed.
GB - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
PTO Belt
Deck Belt
1. Stop engine, remove key, wait for all
moving parts to stop and hot parts to
cool.
1. Stop engine, remove key, wait for all
moving parts to stop and hot parts to
cool.
2. Remove the two drive belts from engine
pulley. See Wheel Drive Belts on
page 20.
2. Remove the two drive belts from engine
pulley. See Wheel Drive Belts on
page 20.
3. Remove the belt cover from the deck.
4. Disconnect the two idler springs from the
spring anchors.
NOTE: Do not remove the bolt holding the
engine pulley to the crankshaft. Loosen it
enough so the PTO belt clears the belt finger.
3. Remove the PTO belt from the PTO
clutch. See PTO Belt on page 21.
4. Remove the two idler arms from the
deck.
5. Remove the deck belt and install the
new belt.
5. Loosen the bolt holding the engine
pulley to the crankshaft and slide the
pulley down until the PTO belt can be
removed from the pulley.
6. Install the new belt on the engine pulley
and on the deck pulleys.
6. Replace the two idler arms on the deck.
7. Replace the PTO belt on the PTO clutch.
REPLACING MOWER BLADE
Remove (Figure 17)
7. Push the engine pulley up the crankshaft
(74.5 N•m).
8. Connect the two idler springs to spring
anchors.
CAUTION: Mower blades are
blades or wear gloves, and use
extra caution when servicing
them.
9. Replace the belt cover.
10. Replace the wheel two drive belts on the
engine pulley.
1. Block mower blades to prevent rotation.
2. Remove mounting hardware and mower
blades from mower deck.
Rear of Unit
2
1
Install (Figure 17)
1. Install mower blades on spindles with
mounting hardware.
4
5
2. Torque 5/8-inch nut to 92 to 130 lbf-ft
(125 to 176 N•m).
3
1
2
6
3
3
4
5
4
1. PTO Belt
2. Engine Pulley
3. Idler Arm
4. Tension
Spring
5. Spring Anchor
6. Deck Belt
1. Spindle
2. Blade
3. Washer
4. 5/8 in. Nut
Figure 16
Figure 17
GB - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICING THE BATTERY
1
NOTE: Unit comes equipped with a
maintenance-free battery that requires no
regular maintenance except cleaning the
terminals.
WARNING: Battery posts,
terminals and related accessories
contain lead and lead
compounds, chemicals known to
the State of California to cause
cancer and reproductive harm.
Wash hands after handling.
Battery Removal and Installation
Remove (Figure 18)
1. Remove the battery cover.
2. Disconnect negative (–) cable first, then
positive (+) cable.
3. Remove battery from unit.
3
5
2
Install (Figure 18)
1. Install battery on the unit.
2. Connect positive (+) cable first, then
negative (–) cable.
3. Apply petroleum jelly or dielectric grease
to battery cable ends and terminals.
4. Replace the battery cover.
6
4
1. Battery Cover
2. Negative (–)
Cable
4. Battery
5. Positive (+)
Terminal
3. Negative (–)
6. Positive (+)
Terminal
cable
Figure 18
Cleaning Battery and Battery Cables
(Figure 18)
1. Remove the battery cover.
2. Disconnect negative (–) cable first, then
positive (+) cable.
3. Clean battery cable ends, negative (–)
terminal, and positive (+) terminal with a
wire brush and rinse with a weak baking
soda solution.
GB - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect positive (+) cable first, then
negative (–) cable.
•
In case of internal contact, DO NOT
induce vomiting!
5. Apply petroleum jelly or dielectric grease
to battery cable ends and terminals.
6. Replace belt cover.
IMPORTANT: DO NOT fast charge. Charging
at a higher rate will damage or destroy
battery.
IMPORTANT: ALWAYS follow information
provided on battery and battery charger.
Contact battery and battery charger
Charging the Battery
manufacturers’ for detailed instructions.
WARNING: FROZEN
BATTERIES CAN EXPLODE
and result in death or serious
injury. DO NOT charge a frozen
battery. Let the battery thaw
before charging.
1. Remove battery from unit (see Battery
Removal and Installation on page 22).
2. Place battery in a well-ventilated area.
3. Connect positive (+) lead of charger to
positive (+) terminal, and negative (–)
lead of charger to negative (–) terminal.
4. Charge battery according to battery
charger and battery manufacturers’
instructions.
5. Install battery on unit (see Battery
Removal and Installation on page 22).
Follow First Aid directions for contact with
battery fluid.
•
•
External Contact: Flush with water.
Eyes: Flush with water for at least 15
minutes and get medical attention
immediately!
Jump-Starting
Gravely does not recommend jump-starting
your unit. Jump-starting can damage engine
and electrical system components. See your
engine manual for more detailed information.
•
Internal Contact: Drink large quantities
of water. Follow with Milk of Magnesia,
beaten egg or vegetable oil. Get
medical attention immediately!
STORAGE
Engine
CAUTION: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
When storing unit for extended periods of
time, remove all fuel from tank and carburetor
(run dry). Refer to engine manual.
Fuel System
IMPORTANT: NEVER spray unit with high-
pressure water or store unit outdoors. Store
mower in a cool, dry, protected location.
Gasoline left in the fuel system for extended
periods without a stabilizer will deteriorate,
resulting in gum deposits in the system.
These deposits can damage the carburetor
and the fuel hoses, filter and tank. Prevent
deposits from forming in the fuel system
during storage by adding a quality fuel
stabilizer to the fuel. Follow the
Cleaning
NOTE: Allow unit to cool before cleaning.
Clean unit thoroughly with mild soap and low
pressure water. Brush off dirt and debris from
all surfaces. Touch up all scratched surfaces
to prevent rust. Matching touch-up paint is
available from your Gravely Dealer. Do not
use abrasives, solvents, or harsh cleaners.
recommended mix ratio found on the fuel
stabilizer container.
To treat the fuel system for storage:
Inspection
1. Add fuel stabilizer according to
manufacturer’s instructions.
2. Run engine for at least 10 minutes after
adding stabilizer to allow it to reach the
carburetor.
NEVER store the engine with fuel in the fuel
tank inside of a building with potential
sources of ignition.
Inspect mower and repair or replace worn or
damaged parts to avoid delays when
beginning use again.
Regularly check all hardware and keep
fasteners tight. Know unit is in safe working
condition.
Grass Bag
Wash out grass bag and allow to dry before
storage. Grass bag may be stored in position
on mower.
GB - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
PROBLEM
PROBABLE CAUSE
CORRECTION
1. Safety switch not held down.
1. Hold down safety switch
while turning the ignition key.
2. Replace ignition switch.
3. Replace fuse.
Engine will not
start
2. Ignition switch is faulty.
3. Wiring harness fuse is blown.
4. Loose or corroded battery
cables.
4. Clean and tighten battery
cables.
5. Discharged battery.
6. Faulty starter.
7. Fuel tank empty.
5. Charge the battery.
6. See your Dealer.
7. Fill fuel tank.
1. Out of fuel.
1. Fill fuel tank with clean, fresh
fuel.
2. Replace fuel filter.
3. Replace spark plug.
4. Clean or replace air cleaner.
5. Refer to the engine manual
or see your Dealer.
Engine is
difficult to
restart
2. Fuel filter is dirty.
3. Faulty spark plug.
4. Air cleaner is plugged or dirty.
5. Faulty engine.
1. Deck is clogged with grass.
1. Clean the deck cutting
chamber.
Cut is poor
2. Blades are dull.
3. Cutting wet grass.
4. Cutting too low.
2. Sharpen or replace blades.
3. Wait for grass to dry.
4. Raise cutting height and cut
grass in two or more passes.
5. PTO belt is slipping.
5. Adjust or replace PTO belt.
1. Deck is clogged with grass.
1. Clean the deck cutting
chamber.
2. Sharpen or replace blades.
3. Wait for grass to dry.
4. Raise cutting height and cut
grass in two or more passes.
Grass does
not disperse
evenly
2. Blades are dull.
3. Cutting wet grass.
4. Cutting too low.
1. Deck is clogged with grass.
1. Clean the deck cutting
chamber.
2. Sharpen or replace blades.
3. Wait for grass to dry.
4. Raise cutting height and cut
grass in two or more passes.
Mower does
not bag
clippings
2. Blades are dull.
3. Cutting wet grass.
4. Cutting too low.
5. PTO belt is slipping.
5. Adjust or replace PTO belt.
1. Loose or damaged drive belts.
1. Adjust or replace drive belts.
See Wheel Drive Belts on
page 20.
2. Replace drive cable. See
your authorized dealer for
repairs.
Wheel drive
does not
engage
2. Damaged drive cable.
3. Damaged transmission or
drive component.
3. See your authorized dealer
for repairs.
GB - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE PARTS
Always use genuine Gravely parts to keep
your mower running like new.
ACCESSORIES
See your authorized Gravely Dealer to add
these optional accessories.
Part
Number
Description
71106100
71510800
Bagger Kit
Mulch Kit
03746500
03797300
07200529
07200506
07243300
07234300
21534100
Blade
Mulching Blade
Forward Traction Belt
Reverse Traction Belt
PTO Belt
Deck Belt
Spark Plug
GB - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Model Number
911411
WAW 34
68.5 (174)
38 (96.5)
36 (91.4)
276 (125.2)
34 (86.3)
Description
Length - in. (cm)
Height - in. (cm)
Width - in. (cm)
Actual Weight - lbs (kg)
Cutting Width- in. (cm)
Cutting Height - in. (cm)
Engine, 4 cycle
Model
1.75 – 3.5 (4.4 – 8.9)
Briggs & Stratton
I/C
Governed RPM (May be different from
maximum rpm.)
3600 +/- 100
21 (344)
Displacement Cu. In. (cc)
Cylinder Bore
Aluminum
See Engine Manual
48 (1.4)
Engine Oil Type
Crank Case Capacity - Oz. (Liter)
Oil System
See Engine Manual
See Engine Manual
See Engine Manual
10 (9.5)
Spark Plug Gap - in. (mm)
Fuel Type
Fuel Tank Capacity - qt (Liter)
Air Cleaner
Dual Element
12V Electric
Yes
Starting
Differential
Forward Speed - MPH (km/hr)
Reverse Speed - MPH (km/hr)
Mower Deck
3.5 (5.6)
2.0 (3.2)
Two-Spindle
8 (20.3)
Front Wheel Dia - in. (cm)
Rear Wheel Dia - in. (cm)
Rear Wheel Tire Pressure psi (kPa)
Warranty
13 (33)
28 (193)
2-Year Consumer Warranty
GB - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Two-Year Limited Lawn
and Garden Warranty
This warranty statement applies only to 21-Inch Walk Behind Lawn Mowers, Wide Area
Walks, AMP Wide Area Walks, Tillers, String Trimmers, Log Splitters, Edgers and Power
Brushes
Ariens Company (Ariens) warrants to the original purchaser that Ariens and Gravely brand consumer
products manufactured and sold by Ariens will be free from defects in material and workmanship for a period
of two years after the date of purchase. An authorized Ariens dealer (Ariens brand products) or Gravely
dealer (Gravely brand products) will repair any defect in material or workmanship, and repair or replace any
defective part, subject to the conditions, limitations and exclusions set forth herein. Such repair or
replacement will be free of charge (labor and parts) to the original purchaser except as noted below.
Two-Year Limited Warranty on AMP™ Series Battery Packs and Subassemblies
The battery pack and/or battery subassemblies on AMP series electric mowers is/are warranted to the
original purchaser for two years from the date of purchase. Ariens will replace, free of charge to the
original purchaser, any battery pack and/or battery subassembly that fails due to defect in material or
workmanship for one year after the date of purchase. For the next 12 months, Ariens will cover the pro-
rated cost of replacing a battery pack and/or battery subassembly that fails due to defect in material or
workmanship. This warranty does not apply to battery packs or battery subassemblies that fail due to
accident, neglect, abuse, improper maintenance, improper storage or improper charging procedures.
One-Year Limited Warranty on Professional/Commercial 21-inch Walk-Behind Lawn
Mowers
21-inch walk-behind lawn mowers labeled or designated by Ariens as a Professional/Commercial prod-
uct put to any business use, agricultural, commercial, or industrial, are warranted to the original pur-
chaser to be free from defects in material and workmanship for a period of one year after the date of
purchase.
90-Day Limited Warranty on Service Parts and Accessories
Genuine Ariens or Gravely brand service parts and accessories are warranted to be free from defects
in material and workmanship for a period of 90 days after the date of purchase. An authorized Ariens or
Gravely dealer will repair or replace any such part or accessory free of charge, except for labor, during
that period.
Except for 21-inch walk-behind lawn mowers labeled or designated by Ariens as a Professional/Commercial
product, the duration of all warranties herein applies only if the product is put to personal use around a
household or residence. If the product is put to any business use, agricultural, commercial, or industrial, then
the duration of these warranties shall be 90 days after the date of purchase. If any product is rented or
leased, then the duration of these warranties shall be 90 days after the date of purchase.
Exceptions, Limitations, Exclusions
Customer Responsibilities
Register the product immediately at the time of sale. If the dealer does not register the product, the
customer must complete the product registration card in the literature package and return it to the Ariens
To obtain warranty service, the original purchaser must:
•
•
Perform the maintenance and minor adjustments explained in the owner’s manual.
Promptly notify Ariens or an authorized Ariens or Gravely service representative of the need for
warranty service.
•
•
Transport the product to and from the place of warranty service.
Have the warranty service performed by an authorized Ariens or Gravely service representative.
ARIENS COMPANY
Con_L&G_2010
27
GRAVELY® | STENS® | LOCKE® | NATIONAL® | BYNORM® | EVERRIDE® | GREAT DANE®
Download from Www.Somanuals.com. All Manuals Search And Download.
To find an Ariens or Gravely authorized service representative, contact Ariens at:
655 W. Ryan Street
Brillion, WI 54110
(920) 756 - 2141
Exceptions and Limitations
•
Batteries are warranted only for a period of 12 months after date of purchase, on a prorated basis. For
the first 90 days of the warranty period, a defective battery will be replaced free of charge. If the
applicable warranty period is more than 90 days, Ariens will cover the prorated cost of any defective
battery, for up to 12 months after the date of purchase. This battery limited warranty does not apply to
the battery packs on AMP series products.
Exclusions – Items Not Covered by This Warranty
Engines and engine accessories are covered only by the engine manufacturer’s warranty and are not
•
covered by this warranty.
•
•
Parts that are not genuine Ariens or Gravely service parts are not covered by this warranty.
The following maintenance, service and replacement items are not covered by this warranty unless
they are noted in the Limitations section above: lubricants, spark plugs, oil, oil filters, air filters, fuel
filters, brake linings, brake arms, brake shoes, runners, scraper blades, shear bolts, mower blades,
mower vanes, tines, brushes, headlights, light bulbs, knives, cutters.
•
•
Any misuse, alteration, improper assembly, improper adjustment, neglect, or accident which requires
repair is not covered by this warranty.
This warranty applies only to products purchased in the United States (including Puerto Rico) and
Canada. In all other countries, contact place of purchase for warranty information.
Disclaimer
Ariens may from time to time change the design of its products. Nothing contained in this warranty shall be
construed as obligating Ariens to incorporate such design changes into previously manufactured products,
nor shall such changes be construed as an admission that previous designs were defective.
LIMITATION OF REMEDY AND DAMAGES
Ariens Company’s liability under this warranty, and under any implied warranty that may exist, is limited to
repair of any defect in workmanship, and repair or replacement of any defective part. Ariens shall not be
liable for incidental, special, or consequential damages (including lost profits). Some states do not allow the
exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
DISCLAIMER OF FURTHER WARRANTY
Ariens Company makes no warranty, express or implied, other than what is expressly made in this
warranty. If the law of your state provides that an implied warranty of merchantability, or an implied
warranty of fitness for particular purpose, or any other implied warranty, applies to Ariens Company,
then any such implied warranty is limited to the duration of this warranty. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
ARIENS COMPANY
Con_L&G_2010
GRAVELY® | STENS® | LOCKE® | NATIONAL® | BYNORM® | EVERRIDE® | GREAT DANE®
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
GRAVELY
655 West Ryan Street
Brillion, WI 54110-1072
920-756-2141
Fax 920-756-2407
Download from Www.Somanuals.com. All Manuals Search And Download.
|