BroadSoft Partner
Configuration Guide
Grandstream GXW-400X
FXS Analog Gateway
&
HandyTone HT-50X
Analog Telephone Adapter
April 2007
Document Version 1.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Document Revision History
Version
Reason for Change
1.1
Introduced document.
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 3 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1
2
3
Overview..........................................................................................................................................5
BroadWorks Validation Package Support Level.......................................................................6
Device Capabilities and Known Interoperability Issues...........................................................7
3.1 Capabilities....................................................................................................................................7
3.2 Interoperability Issues...................................................................................................................9
4
5
6
BroadWorks Device Identity/Profile..........................................................................................10
BroadWorks Device Type...........................................................................................................11
Configuration................................................................................................................................12
6.1 System Level Configuration...................................................................................................... 13
6.2 Subscriber Level Configuration Parameters............................................................................ 14
7
Enhanced IP Phone Configuration............................................................................................15
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 4 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Overview
This document describes the configuration procedures required for a Grandstream GXW-
4004 / GXW-4008 / HT-502 to make full use of the capabilities of BroadWorks.
The GXW-4004 / GXW-4008 / HT-502 are a few of the many access devices that
interoperate with BroadWorks.
The GXW-4004 / GXW-4008 / HT-502 uses the Session Initiation Protocol (SIP) to
communicate with BroadWorks for call control. It also translates voice to audio packets for
transmission across a packet network.
This guide describes the specific configuration items that are important for use with
BroadWorks. It does not describe the purpose and use of all configuration items on the
GXW-4004 / GXW-4008 / HT-502. For those details, see the GXW-4004 / GXW-4008 /
HT-502 User Manual supplied by Grandstream 1.a)i.[1]
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 5 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
2
BroadWorks Validation Package Support Level
Devices are validated according to BroadWorks Validation Packages. Each package
validates a subset of features or items. This section describes the device’s support level
for a BroadWorks Validation Package as well as the features or items in the package that
are not supported. For specific issues, see section 3.2 Interoperability Issues. For a
complete list of items validated per package, see Appendix B: BroadWorks Validation
Package Test Items.
BroadWorks Package
Basic Call
Support Level
Full
Items Not Supported
BroadWorks Enhanced Services
Partial
Ring Splash
Advanced Call Control (Talk, Auto-
Answer)
DUT Services – Call Control
Partial
Partial
Network Conference 3-Way
Network Conference N-Way
DUT Services – Registration and
Authentication
BroadWorks Authentication
DUT Services – FAX
DUT Services – Busy Lamp Field
Redundancy
Full
None
Full
SBC/ALG
Full
Shared Call Appearance
Video
None
None
Full
TCP
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 6 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Device Capabilities and Known Interoperability Issues
This section describes the features supported by the GXW-4004 / GXW-4008 / HT-502,
as well as BroadWorks interoperability issues and impact. The following table describes
capabilities.
Verified Revisions shows the results of partner (vendor) testing of a specific BroadWorks
version with a specific partner’s device under test (DUT) version.
Compatible Revisions indicates the maintenance versions that should interface properly
with BroadWorks.
3.1 Capabilities
Device Type
Generic SIP Smart (Proxy Addr)
Lines and Appearances
GXW-4004: 4 lines 1 appearances per line
GXW-4008: 8 lines 1 appearances per line
HT-502: 2 lines 1 appearances per line
Speaker/Power/Bridge
Verified Revisions
No/No/Yes
BroadWorks Release 14.0
GXW-4004: Grandstream 1.0.0.39
GXW-4008: Grandstream 1.0.0.39
HT-502: Grandstream 1.0.0.39
Compatible Revisions
BroadWorks Release 14.0
Grandstream Any maintenance version of GXW-
4004/GXW-4008/HT-502 1.0.0.39
SIP Proxy FQDN DNS Lookup
(A, SRV, NAPTR)
A, SRV
Outbound Proxy Configurable
Yes
Outbound Proxy FQDN DNS Lookup
(A, SRV, NAPTR)
A, SRV
BroadWorks Redundancy Enabled
BroadWorks Shared Call Appearance
Yes
N/A
BroadWorks Enhanced IP Phone
Configuration
Partial
Device Services
Call Forwarding, Attended/Blind Call Transfer, 3-way
Call, Call Waiting, Call Hold, Call Return.
Device Call Control
Device-Controlled
(Device-Controlled or Flash INFO-
based)
Codecs
PCMU, PCMA, G723.1 G729A/B/E, iLBC, G726-
16/24/32/40
RFC 2833 DTMF
T.38 Fax
Yes
Yes
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 7 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
TCP
TLS
Yes
Yes
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 8 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Interoperability Issues
This section lists the known interoperability issues between BroadWorks and partner
release(s). For more information on issues related to the particular software release, see
the partner release notes (generally, this should only be for GA partner releases).
Issue Tracking
Number
Issue Title and Description
BroadWorks Release 14
Partner Releases
1025 - 61
1025 -119
Broadworks to DUT, Do Not Disturb (DND) ring splash
X
X
DUT does not play a ring splash. DUT driver does not support ring
splash.
DUT to BroadWorks via Primary Application Server, DUT
Currently Served by Secondary Application Server
DUT does not always contact the primary server first for INVITE. It
relies on the OPTIONS message from BroadWorks to failback.
When DUT is registered on secondary server and the primary
server becomes available and sends an OPTIONS request, DUT
will send INVITE to the primary server.
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 9 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
4
BroadWorks Device Identity/Profile
BroadWorks configurable device identify/profile is introduced in BroadWorks Release 14.0.
This section applies only to BroadWorks Release 14.0 and later.
The following table identifies the required BroadWorks device identity/profile settings for
interoperability between the GXW-4004/GXW-4008/HT-502 and BroadWorks. For an
explanation of the profile parameters, refer to the BroadWorks Device Inventory Guide
1.a)i.[4].
For most of the parameters below, an “X” indicates the parameter function is supported
and/or required. If the item is blank, it is not supported.
Grandstream GXW-4004/GXW-4008/HT-502 Identify/Device Profile
Signaling Address Type
Number of Lines
Intelligent Proxy Addressing
GXW-4004: 4 lines
GXW-4008: 8 lines
HT-502: 2 lines
Ringback Tone/ Early Media
Support
Local Ringback – No Early Media
Registration Capable
Static Registration Capable
E.164 Capable
X
Trusted
Authentication Override
Video Capable
RFC 3264 Hold
X
Route Advance
Wireless Integration
PBX Integration
Use Business Trunking Contact
Forwarding Override
Conference Device
Music On Hold Device
Web Based Configuration URL
Auto Configuration Type
Reset Event
2 Config file
checkSync
Enable Monitoring
CPE System File Name
Device File Format
gxwSystem.txt / htSystem.txt
%BWMACADDRES%.txt
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 10 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
5
BroadWorks Device Type
This section applies to BroadWorks Release 13.0 and before.
The following BroadWorks device type should be used for Grandstream GXW-4004 /
GXW-4008 /HT-502.
„
„
„
Grandstream GXW-4004
Grandstream GXW-4008
Grandstream HT-502
The above device types require BroadWorks Release 14 MP<TBD>. If the BroadWorks
system is currently at a lower patch level, either apply the necessary patch or use the
following generic device type until the system can be patched accordingly.
„
Generic SIP Smart (Proxy Addr)
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 11 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Configuration
Grandstream GXW-4004 / GXW-4008 / HT-502 can be configured via Web GUI Interface
as well as via Configuration File through TFTP or HTTP.
The GXW-4004 / GXW-4008 / HT-502 accepts configuration files in a proprietary binary
format which is produced by the Grandstream configuration tool. The configuration tool
creates a device configuration file based on a configuration template and the device’s
MAC address. All Grandstream products’ sample configuration templates are available on
Grandstream’s web site. A configuration template file contains all configuration
parameters available for a product, with comments describing allowed values of the
parameters. For a detailed parameter list, please refer to the corresponding firmware
release configuration template 1.a)i.[2].
When Grandstream device boots up or reboots, it will issue request for a binary
configuration file named “cfgxxxxxxxxxxxx”, where “xxxxxxxxxxxx” is the LAN MAC
address of the device, i.e., “cfg000b820102ab”. The configuration file name should be in
lower cases.
Grandstream offers free Configuration File generator software in both Linux/Unix and
Windows platform. Both Configuration File Generators can be downloaded from
Grandstream official web site at http://www.grandstream.com/configurationtool.html
1.a)i.[2].
The following examples describe how to set the parameters using a configuration file.
The GXW-4004 / GXW-4008 / HT-502 should be configured to load the configuration file
each time it resets or re-synchronizes. For detailed information on automated provisioning,
please check the GXW-4004 / GXW-4008 / HT-502 User Manual 1.a)i.[1] and the
Grandstream configuration tool user guide 1.a)i.[2].
The capabilities of the GXW-4004 / GXW-4008 / HT-502 have been verified for use with
BroadWorks based on the settings described in the following table. For more information
on the meaning, purpose, and applicability of the individual configuration items, see the
GXW-4004 / GXW-4008 / HT-502 configuration template 1.a)i.[2].
Configuration Files
Files Provided by Partner
Level
Description
gxw4004prog.bin/gxw4004core.bin/gxw4
004boot.bin/gxw4004base.bin
System
Contains the device firmware load.
gxw4008prog.bin/gxw4008core.bin/gxw4
008boot.bin/gxw4008base.bin
ht502prog.bin/ht502core.bin/ht502boot.bi
n/ht502base.bin
GXW-4004 / GXW-4008 / HT-502
Configuration Template
System and
Subscriber
Contains configurable parameters that
apply to all devices in a given
deployment.
Example: gxw400x_config_1.0.0.39.txt
ht502_config_1.0.0.39.txt
cfgMAC
System and
Subscriber
Binary configuration file generated
from configuration template and an
individual device’s MAC address
Example: cfg000b82000000
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 12 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 13 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
6.1 System Level Configuration
This section describes system-wide configuration items that are generally required for
each GXW-4004 / GXW-4008 / HT-502 to work with BroadWorks. Subscriber-specific
settings are described in the next section.
Step
Command
Purpose
System Configuration File <system-wide configuration file name>
Set SIP Proxy/Domain.
Step 1
Set the GXW-4004 / GXW-4008
/ HT-502 SIP server to the Fully
Qualified Domain Name (FQDN)
for the BroadWorks Application
Server cluster.
SIP Server = as.broadworks.net
The domain must match the
domain configured for the
BroadWorks subscriber’s
line/port domain.
Set Outbound Proxy.
Step 2
Set the outbound proxy to the
session border controller (SBC)
if one is deployed between the
GXW-4004 / GXW-4008 / HT-
502 and BroadWorks.
OutBound Proxy =
sbc.broadworks.net
If there are redundant SBCs, set
it to the FQDN for the SBC
cluster.
Enable DNS SRV lookup.
Step 3
Step 4
Step 5
Enable DNS SRV lookups.
Use DNS SRV = “Yes”
Set register mode.
Enable SIP register.
SIP Registration = “Yes”
Set SIP Timers.
The default registration period is
60 minutes.
Register Expiration = 60
Enable negotiated DTMF type.
Step 6
Step 7
Set the GXW-4004 / GXW-4008
/ HT-502 to enable inband or
RFC 2833 negotiated DTMF.
Send DTMF = “via RTP (RFC2833)”
Configure dialplan.
Example:
Configure the GXW-4004 /
GXW-4008 / HT-502 dial plan
according to the locale.
Dial Plan = “{ x+ }”
The dial plan shown is the
device default dial plan – any
number is allowed.
Disable local feature code
services.
Step 8
Disable feature access codes
controlled by the device.
Enable Call Features = “No”
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 14 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Subscriber Level Configuration Parameters
This section identifies the device-specific parameters, including registration and
authentication. These settings must be unique across devices in order to be matched with
the settings for a BroadWorks subscriber.
Provisioning a subscriber to register with BroadWorks allows calls to terminate to the
subscriber’s line. Registration requires that a unique address of record (AoR) is
provisioned on BroadWorks and the phone; provisioning an AoR on BroadWorks consists
of setting the line/port parameter to a unique value within the Application Server cluster.
Grandstream GXW-4004 / GXW-4008 / HT-502 supports four SIP accounts (lines), eight
SIP accounts, and two SIP accounts respectively. The follow example shows how to
configure subscriber elements for an account.
Step
Command
Purpose
Subscriber Configuration Items
Set Register User ID for each
line.
Step 1
Step 2
The register user ID must
correspond with the line/port
setting on BroadWorks.
Example:
SIP User_ID = "2405551111" ;
Enable SIP Authentication for
each line.
If the Authentication service is
configured on BroadWorks, these
parameters must be configured to
match the BroadWorks settings.
Example:
Authenticate ID =
Authenticate Password =
"welcome" ;
Configure display name for each
line.
Step 3
Step 4
For each line, configure the name
to be displayed on the device.
Example:
Name = “Claire Smith” ;
Select SIP Profile for each line.
Example:
Set SIP Profile or each line.
Profile ID = Profile 1
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 15 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Enhanced IP Phone Configuration
Enhanced IP Phone Configuration is a BroadWorks feature that enables automatic
generation of device configuration files, given administrator-supplied templates.
For more information on the Enhanced IP Phone Configuration feature, see the Enhanced
IP Phone Configuration Guide 1.a)i.[3].
NOTE: BroadSoft does not manage or distribute template files for use with the Enhanced IP
Phone Configuration feature. Obtain template files from Grandstream or use the configuration
files obtained from Grandstream for the specific GXW-4004 / GXW-4008 / HT-502 firmware
release to create template files appropriate for your installation.
Since the GXW-4004 / GXW-4008 / HT-502 SIP phones require the configuration files be
converted into a binary format, an extra step must be performed when using this feature. After
the configuration files have been sent to the TFTP server and before the phone is reset, the
configuration files must be converted to binary format using Grandstream’s configuration tool. .
For detailed information on automated provisioning, please check the Grandstream configuration
tool user guide 1.a)i.[2].
The GXW-4004 / GXW-4008 / HT-502 use only a phone-specific file to configure the
device. However, the Enhanced IP Phone Configuration feature requires a system and a
phone-specific file for each device. To satisfy the system file requirement, an empty file
(gxwDefault.txt, htDesfult.txt) will need to be uploaded to BroadWorks as the system file.
This file will be sent to the FTP server but will not actually be used for the configuration file
generation. The group template file is used to build the configuration files for the devices
of this device type assigned to the group. For a sample GXW-4004 / GXW-4008 / HT-502
group template file, see Appendix A.
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 16 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Sample GXW-4004 / GXW-4008 / HT-502 Configuration Files
NOTE: The following samples are examples and should be used as a reference only. DO NOT CUT
AND PASTE THESE EXAMPLES TO GENERATE YOUR CONFIGURATION FILES. Use the
configuration files obtained from Grandstream with the specific release to generate your configuration
files.
System Default Parameters
NOTE: This is an example file and should be used for reference only.
# SIP Default Generic Configuration Parameters
##################################
# Profile/Account 1
#
##################################
# Profile Active. 0 - no, 1 - yes
P271 = 1
# SIP Server
P47 = as.broadworks.net
# Outbound Proxy
P48 = sbc.broadworks.net
# Use DNS SRV. 0 - no, 1 - yes.
P103 = 1
# SIP Registration. 0 - no, 1 - yes
P31 = 1
# Register Expiration (in minutes. default 1 hour, max 45 days)
P32 = 60
# DTMF via RTP (RFC2833). 0 - no, 1 - yes
P851 = 1
# Dial Plan.
P4200 = { x+ }
# Enable Call Features. 0 - no, 1 – yes
P191 = 0
###################################
# Profile/Account 2
#
###################################
# Profile Active. 0 - no, 1 - yes
P401 = 1
# SIP Server
P747 = as.broadworks.net
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 17 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
# Outbound Proxy
P748 = sbc.broadworks.net
# Use DNS SRV. 0 - no, 1 - yes.
P702 = 1
# SIP Registration. 0 - no, 1 – yes
P731 = 1
# Register Expiration (in minutes. default 1 hour, max 45 days)
P732 = 60
# DTMF via RTP (RFC2833). 0 - no, 1 - yes
P861 = 1
# Dial Plan.
P4201 = { x+ }
# Enable Call Features. 0 - no, 1 – yes
P751 = 0
Phone-Specific Parameters:
NOTE: This is an example file and should be used for reference only.
# SIP Device-specific Configuration Parameters
##################################
# HT-502 Account 1
#
##################################
# SIP User ID
P35 = 2405551111
# Authenticate ID
P36 = [email protected]
# Authenticate password
P34 = welcome
# Display Name
P3 = Claire Smith
##################################
# HT-502 Account 2
#
##################################
# Account 2 SIP User ID
P735 =
# Authenticate ID
P736 =
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 18 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
# Authenticate Password
P734 =
# Display Name
P703 =
############################
# GXW-4004/GXW-4008
#
############################
# FXS Port 1
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4060 =
P4090 =
P4120 =
P4180 =
P4150 =
# FXS Port 2
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4061 =
P4091 =
P4121 =
P4181 =
P4151 =
# FXS Port 3
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4062 =
P4092 =
P4122 =
P4182 =
P4152 =
# FXS Port 4
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4063 =
P4093 =
P4123 =
P4183 =
P4153 =
#####################################################
# The following 4 ports belong to GXW-4008 only
#
#####################################################
# FXS Port 5
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4064 =
P4094 =
P4124 =
P4184 =
P4154 =
# FXS Port 6
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 19 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile 1, 1 - Profile 2)
P4065 =
P4095 =
P4125 =
P4185 =
P4155 =
# FXS Port 7
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4066 =
P4096 =
P4126 =
P4186 =
P4156 =
# FXS Port 8
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4067 =
P4097 =
P4127 =
P4187 =
P4157 =
Group Template File: GXW-GroupTemplate.txt /HT- GroupTemplate.txt
NOTE: This is an example file and should be used for reference only.
# SIP Default Generic Configuration Parameters
##################################
# Profile/Account 1
#
##################################
# Profile Active. 0 - no, 1 - yes
P271 = 1
# SIP Server
P47 = as.broadworks.net
# Outbound Proxy
P48 = sbc.broadworks.net
# Use DNS SRV. 0 - no, 1 - yes.
P103 = 1
# SIP Registration. 0 - no, 1 - yes
P31 = 1
# Register Expiration (in minutes. default 1 hour, max 45 days)
P32 = 60
# DTMF via RTP (RFC2833). 0 - no, 1 - yes
P851 = 1
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 20 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
# Dial Plan.
P4200 = { x+ }
# Enable Call Features. 0 - no, 1 – yes
P191 = 0
###################################
# Profile/Account 2
#
###################################
# Profile Active. 0 - no, 1 - yes
P401 = 1
# SIP Server
P747 = as.broadworks.net
# Outbound Proxy
P748 = sbc.broadworks.net
# Use DNS SRV. 0 - no, 1 - yes.
P702 = 1
# SIP Registration. 0 - no, 1 – yes
P731 = 1
# Register Expiration (in minutes. default 1 hour, max 45 days)
P732 = 60
# DTMF via RTP (RFC2833). 0 - no, 1 - yes
P861 = 1
# Dial Plan.
P4201 = { x+ }
# Enable Call Features. 0 - no, 1 – yes
P751 = 0
###################################################
# SIP Device-specific Configuration Parameters
#
###################################################
##################################
# HT-502 Account 1
#
##################################
# SIP User ID
P35 = %BWLINEPORT-1%
# Authenticate ID
P36 = %BWAUTHUSER-1%
# Authenticate password
P34 = %BWAUTHPASSWORD-1%
# Display Name (John Doe)
P3 = %BWCLID-1%
##################################
# HT-502 Account 2
#
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 21 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
##################################
# Account 2 SIP User ID
P735 = %BWLINEPORT-2%
# Authenticate ID
P736 = %BWAUTHUSER-2%
# Authenticate Password
P734 = %BWAUTHPASSWORD-2%
# Display Name
P703 = %BWCLID-2%
############################
# GXW-4004/GXW-4008
#
############################
# FXS Port 1
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4060 = %BWLINEPORT-1%
P4090 = %BWAUTHUSER-1%
P4120 = %BWAUTHPASSWORD-1%
P4180 = %BWCLID-1%
P4150 =
# FXS Port 2
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4061 = %BWLINEPORT-2%
P4091 = %BWAUTHUSER-2%
P4121 = %BWAUTHPASSWORD-2%
P4181 = %BWCLID-2%
P4151 =
# FXS Port 3
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4062 = %BWLINEPORT-3%
P4092 = %BWAUTHUSER-3%
P4122 = %BWAUTHPASSWORD-3%
P4182 = %BWCLID-3%
P4152 =
# FXS Port 4
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4063 = %BWLINEPORT-4%
P4093 = %BWAUTHUSER-4%
P4123 = %BWAUTHPASSWORD-4%
P4183 = %BWCLID-4%
P4153 =
#####################################################
# The following 4 ports belong to GXW-4008 only
#
#####################################################
# FXS Port 5
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 22 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
P4064 = %BWLINEPORT-5%
P4094 = %BWAUTHUSER-5%
P4124 = %BWAUTHPASSWORD-5%
P4184 = %BWCLID-5%
P4154 =
# FXS Port 6
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4065 = %BWLINEPORT-6%
P4095 = %BWAUTHUSER-6%
P4125 = %BWAUTHPASSWORD-6%
P4185 = %BWCLID-6%
P4155 =
# FXS Port 7
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4066 = %BWLINEPORT-7%
P4096 = %BWAUTHUSER-7%
P4126 = %BWAUTHPASSWORD-7%
P4186 = %BWCLID-7%
P4156 =
# FXS Port 8
# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -
Profile 1, 1 - Profile 2)
P4067 = %BWLINEPORT-8%
P4097 = %BWAUTHUSER-8%
P4127 = %BWAUTHPASSWORD-8%
P4187 = %BWCLID-8%
P4157 =
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 23 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: BroadWorks Validation Package Test Items
The following table describes the items tested in each BroadWorks Validation Package.
BroadWorks Validation Package
Items Supported
Basic Call
Basic Call Origination / Termination
Call Failure Codes
Session Audit
Ringback
Dial Plan
Inband DTMF
RFC 2833/Negotiation
Codec Renegotiation
BroadWorks Enhanced Services
Basic CommPilot Call Manager Functions
Voice Messaging Audio MWI
Voice Messaging Visual MWI
Ring Splash
Priority Alerting
Priority Call Waiting
Alternate Numbers
Advanced Call Control
Anonymous Call
Remote Restart
Call Park Retrieve – Answer with Hold
DUT Services – Call Control
Call Waiting
Call Hold
Blind Transfer
Attended Transfer
3-Way Call
Network Conference 3-Way
Network Conference N-Way
DUT Services – Registration and
Authentication
Authenticated Registration
Maximum Registration
Minimum Registration
Rejected Registration
Authenticated Origination
Authenticated Re-INVITE
Authenticated REFER
BroadWorks Authentication
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 24 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
BroadWorks Validation Package
Items Supported
DUT Services - FAX
FAX Passthrough
FAX T38
DUT Services – Busy Lamp Field
Redundancy
Basic BLF
DNS
Registration Failover
Call Setup Failover
Mid-Call Failover
SBC/ALG
Registration
Call Origination
Call Termination
Shared Call Appearance
Line Seize
Line Lamp Management
Line Hold/Retrieve
Multiple Call Arrangement
SCA Bridging
Video
TCP
Integrated Video Phone
Video Add-On
Basic
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 25 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
References
[1] Grandstream Networks, Inc. 2007. GXW-400X / HT-502 User Manual. Download
at
AND GUI Interfaces
[2] Grandstream Networks, Inc. 2007. Grandstream Configuration Tool and Templates.
[3] BroadSoft, Inc. 2006. BroadWorks Enhanced IP Phone Configuration Guide,
Release 14.0. Available from the BroadSoft KnowledgeBase at
[4] BroadSoft, Inc. 2006. BroadWorks Device Inventory Guide, Release 14.0.
Available from the BroadSoft KnowledgeBase at
[5] BroadSoft, Inc. 2006. BroadWorks Redundancy Guide, Release 14.0. Available
BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X
©2007 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE.
DOCUMENT NUMBER
PAGE 26 OF 25
Download from Www.Somanuals.com. All Manuals Search And Download.
|