Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide
GXV3140 IP Video Phone
GXV-3140
MOBOTIX T24S
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION:
This guide has been tested for Grandstream GXV3140 IP Video Phone with firmware version 1.0.7.50 and Mobotix
T24S Door System with MX-V4.1.1.7 (2011-12-15) Software. Be aware that different firmware revisions may have
different web interface formats and functionalities. This guide is applicable to the following Grandstream phone models:
GXV3140.
This guide will cover the 3 possible ways to set up a phone for use with Mobotix T24S.
INITIAL SETUP FOR A NEW “GXV-3140/T24S SYSTEM” DOOR SYSTEM:
This section details how you can configure your GXV-3140 with the Mobotix T24S System automatically. To do so, please
proceed as follows:
1. Unpack the GXV-3140 and attach the handset.
2. Connect the GXV-3140 video phone to the network and to the power. The phone will boot up, and request an IP
address from your DHCP server. Once the phone gets an IP address it will display it as shown below:
Figure 1: GXV3140 LCD Idle Screen
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 3 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connect the GXV-3140 and T24S Door Station to the switch/router as shown below :
Figure 2: Connecting the GXV-3140 and T24S
4. The buttons will light up for four seconds. During this time, press the doorbell button (bottom button) until that it
starts flashing. This starts automatic initial configuration, which will take around 5 minutes:
The T24S lights blink as the camera starts up.
The current T24S IP addresses and network data are announced automatically.
Each GXV-3140 phone is contacted and configured by the camera.
Each GXV-3140 phone restarts automatically each time the MOBOTIX configuration is updated.
*101 is the new SIP quick-dial number for the first GXV-3140, while the T24S has the *201 SIP quick-dial number
The phone idle screen display will change to the following :
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 4 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 3: GXV3140 “provisioned by Mobotix” LCD Idle Screen
5. The T24S Door Station and GXV-3140 phone are now ready.
Here is a summary of the changes made automatically on both the GXV-3140 and T24S Door Station:
SIP server in the T24S is activated automatically.
GXV-3140 IP Video phone and the T24S are configured to use DHCP, and are automatically assigned an IP
address and SIP quick-dial number.
Pushing the bell button located on the camera module (if available) calls all connected GXV-3140 phones (“if they
were connected to the network during the initial Setup”) (This behavior can be reprogrammed using MxEasy).
In order to call from the GXV-3140 to the T24S Door System, you only need to lift the Handset.
DISCOVER/CONFIGURE A GXV-3140 PHONE AUTOMATICALLY WITH AN EXISTING DOOR
SYSTEM
In this section we will describe how to Discover and Configure the phone automatically using the MxEasy software
In order to Discover/Configure the phone using MxEasy please proceed as follows:
1. Open MxEasy software Camera Door Station Option, you will now be prompted to the configuration page for
the door bell action :
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 5 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 4: Add a new GXV-3140
Note: GrandStream “*101” is the extension that was configured during the initial configuration.
2. Press the + sign in order to add a new phone, you will now have another field, choose Search Door Stations
Devices as shown below:
Figure 5: Discover the new added GXV-3140
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 6 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
Once the search is done you will be prompted with the list of the available GXV-3140 on your network, as shown below:
Figure 6: Discovery Result
3. Select the phone you want to add to your system, once your press OK and confirm the action, the phone will reset
and get configured automatically.
Note:
When you configure the phone using one of the above two method described, you may at anytime lift the GXV-
3140 handset which will trigger a call to your T24S System.
In order to establish a call to another GXV-3140 configured automatically by the T24S Door system you will need
to enter the SIP quick-dial number of the other GXV-3140 using the telephone keypad and press the send key
(green phone) before picking up the handset.
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 7 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 7: Example of your Door System
ADD/CONFIGURE A NEW GXV-3140 MANUALLY:
This section details how you can configure your GXV-3140 with the Mobotix T24S System manually. To do so, please
proceed as follows:
1. First, ensure that you have created the extension that you wish to use with the phone in T24S. Here is a quick
description on how to create the extension on the Mobotix T24S System :
a. Access the Admin Menu –> Sip Server Settings, you will be prompted to the following page
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 8 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 8: T24S Mobotix SIP Server settings
Make sure that SIP server is on, and take a note of the SIP server IP and the port that will be used on the phone
configuration.
b. Add a new extension on T24S :
Figure 9: Add a new extension on T24S
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 9 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Once the Add new SIP account is pressed, the blank field will appear please configure the SIP address/User
Name/ Password you wish to use:
Figure 10: Extension Settings on T24S
d. Once done, please update the configuration by pressing the Set button.
2. Connect the GrandStream GXV-3140 video phone to the network and to the power. The phone will boot up, and
request an IP address from your DHCP server. Once the phone gets an IP address it will display on its idle
screen.
3. Now use your browser to access the web interface of the phone by entering „http://<ip-address>‟ where <ip-
address> is the IP address shown on the phone.
4. Enter the username and password of the phone and click on login to access the phone‟s configuration. (The
default administrator username is “admin” and password is “admin”).
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 10 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 11 – Login Page of a GXV phone
5. The GXV-3140 offers you the possibility to configure 3 SIP accounts, you may configure the extension from the
T24S Door System on any account, in this example we will configure it using the second Account.
6. Now you can configure the “Account 2” settings. First of all, make sure that „Account Active‟ is set to YES. Enter
an account name for the phone in the „Account Name‟ box. This setting is not used by T24S Door System. It is
only used when making calls to other phones directly.
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 11 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2: Account 2 Configuration on the GXV phone.
7. In the SIP server field, enter the IP or FQDN of the Mobotix T24S Server.
8. Repeat the same setting for the Outbound Proxy option
9. Enter the extension number you want to associate with this phone in the ‘SIP User ID’ settin
Figure 12 – Account configuration on the GXV-3140
7. Now enter the „Username‟ & „Password‟ in the appropriate fields as shown in the above figure 13.
8. Scroll down to the bottom of the page and press „Save‟ to save these settings and then press „Apply‟ in order for
the changes to take effect; the phone should register now with the Mobotix T24S.
9. In order to have full compatibly between Mobotix and the GXV-3140, it is required to enable the Mobotix special
feature on the phone as shown:
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 12 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 3: Mobotix Special Feature
13. Scroll to the bottom of the page and press ‘Save’ to save these settings and then press ‘Apply’ in order for the
changes to take effect; the phone should now be fully compatible with the Mobotix T24S.
Figure 13 – Mobotix Special Feature configuration
10. Save and apply the new configuration, the GXV-3140 should be registered correctly with the T24S Sip Server.
ESTABLISHING A CALL WITH T24S DOOR SYSTEM:
This section will describe the call screen of the GXV-3140 once the call is established. The GXV-3140 videophone offers
certain T24S-specific functions for easy operation of the MOBOTIX Video Door Station using the GXV-3140 keypad.
Note: due to software updates (“From Mobotix Side “), some of the functions in the following examples may be subject to
change.
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 13 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Main Menu of the call screen:
Once the call is established between the GXV-3140 and the T24S camera, the camera image appears automatically
along with the user menu. The main menu will appear on the left side of the call screen as shown below:
Figure 14: Main Call Screen
The Menus will be controlled using the Keypad of the phone (“using the 12 keys (0-9 * and #) and the navigation key of
the phone “).
Note: The Navigation keys are mapped as shown in figure 14
The status display appears at the top left. In this example, the door is closed and locked, the external light is on and the
camera's record function is active.
Figure 15: Status display
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 14 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
The info icons displayed on the phone are described as follows:
Info icon
Description
Function
Open door
The door is open
Closed door
Lock
The door is closed, but not locked
The door is closed and locked
Red lock
Door sensor error: Check door
status!
Incandescent lamp
Microphone
Buzzer
The external light is on (e.g. the
lamp above the door)
The telephone microphone is
disabled.
The one-minute record function is
active.
By default, when someone rings the bell or you call from your GXV-3140 to the camera, the most important basic
functions of the door station appear in the main menu on the right.
Key 1 operates the electric door opener, 3 operates the light, 7 mutes the telephone microphone, and 9 starts one minute
of video and sound recording in the camera. Use the keys 2, 6, 8 and 4 or the corresponding arrow keys to move left/right
up/down digitally through the image. Key 5 activates the zoom function of the camera (zoom +/- using keys 2/8).
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 15 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
Pan-Tilt-Zoom (Digital PTZ):
Key 2 or 8 (push 1x, 2x, 3x): Camera digitally pans by 1//, 2/3 and 3/3 of
a step (maximum) up or down;
Key 0: Display the main menu and return to panorama image (initial view);
Key 4 or 6: Switch to zoomed 4:3 image with simultaneous pan to left or right;
after pushing key 5 (digital zoom) 1x, you can zoom in or out on the displayed
image segment using keys 2 or 8; pushing key 5 again returns you to tilt mode (keys 2 and 8);
Grandstream Networks, Inc.
Mobotix T24S Door System Configuration Guide For GXV3140
Page 16 of 16
Last Update : 01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
|
