Grandstream Networks, Inc.
GXP1400/1405 Small-Medium Business IP Phone
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 1 of 1
Firmware version 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 14: Device Configuration – Settings/Basic Settings............................................................ 20
Table 15: Device Configuration – Settings /Advanced Settings ................................................... 22
Table 16: SIP Account Settings .................................................................................................... 27
GUI INTERFACE EXAMPLES
GXP1400/1405 USER MANUAL
1. Screenshot of Configuration Login Page
2. Screenshot of Status Page
3. Screenshot of Basic Setting Configuration Page
4. Screenshot of Advanced User Configuration Page
5. Screenshot of SIP Account Configuration Page
6. Screenshot of Saved Configuration Changes Page
7. Screenshot of Reboot Page
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 2 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
GXP1400/1405 is a next generation small-to-medium business IP phone that features 2 lines with 1 SIP
account, a 128x40 graphical LCD, 3 XML programmable context-sensitive soft keys, dual network ports
with integrated PoE (GXP1405 only), and 3-way conference. The GXP1400/1405 delivers superior HD
audio quality, rich and leading edge telephony features, personalized information and customizable
application service, automated provisioning for easy deployment, advanced security protection for
privacy, and broad interoperability with most 3rd party SIP devices and leading SIP/NGN/IMS platforms. It
is a perfect choice for small-to-medium businesses looking for a high quality, feature rich IP phone with
affordable cost.
Caution: Changes or modifications to this product not expressly approved by Grandstream, or operation
of this product in any way other than as detailed by this User Manual, could void your manufacturer
warranty.
Warning: Please do not use a different power adaptor with the GXP1400/1405 as it may cause damage
to the products and void the manufacturer warranty.
Note:
•
•
This document is subject to change without notice.
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print,
for any purpose without the express written permission is not permitted.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 3 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
EQUIPMENT PACKAGING
Table 1: Equipment Packaging
GXP1400/1405
Main Case
Yes
Handset
Yes
Phone Cord
Power Adaptor
Ethernet Cable
Base Stand
Yes
Yes (GXP1400 only)
Yes
Yes
Yes
Quick Start Guide
CONNECTING YOUR PHONE
The connectors of the GXP1400/1405 are located on the bottom of the device.
Table 2: GXP1400/1405 Connectors
PC
10/100Mbps RJ-45 ports for PC (downlink) connection
10/100Mbps RJ-45 port for LAN (uplink) connection, integrated PoE (GXP1405
only)
LAN
Power Jack
5V DC power port; UL Certified
Handset Jack
Headset Jack
RJ9
RJ9
SAFETY COMPLIANCES
The GXP1400/1405 phone complies with FCC/CE and various safety standards. The GXP1400/1405 power
adaptor is compliant with the UL standard. Please use the universal power adaptor provided with the
GXP1400/1405 package only. The manufacturer’s warranty does not cover damages to the phone caused by
unsupported power adaptors.
WARRANTY
If you purchased your GXP1400/1405 from a reseller, please contact the company where you purchased
your phone for replacement, repair or refund. If you purchased the product directly from Grandstream,
contact your Grandstream Sales and Service Representative for a RMA (Return Materials Authorization)
number before you return the product. Grandstream reserves the right to remedy warranty policy without
prior notification.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 4 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
Table 3: GXP1400/1405 Feature Guide
Features
GXP1400/1405
LCD Display
128 x 40 pixel
Number of Lines
Programmable Soft Keys
Extension Module
2
3
N/A
Table 4: GXP1400/1405 Key Features in a Glance
Features
Benefits
Open Standards
Compatibility
SIP RFC3261, TCP/IP/UDP, RTP, HTTP/HTTPS, ARP/RARP, ICMP,
DNS (A record, SRV and NAPTR), DHCP (both client and server),
PPPoE, TELNET, TFTP, NTP, STUN, SIMPLE, SIP over TLS, 802.1x,
TR-069
Superb Audio Quality
Advanced Digital Signal Processing (DSP), Silence Suppression, VAD,
CNG, AGC
Network Interfaces
Feature Rich
10/100 Mbps Ethernet port, integrated PoE (GXP1405 only)
Traditional voice features including caller ID, call waiting, hold, transfer,
forward, block, auto-dial, off-hook dial
Advanced Features
2 line keys with dual-color LED and 1 SIP account, 3 way conference,
graphic LCD, 3 XML programmable context sensitive soft keys, 5
navigation keys,
8
dedicated buttons for HOLD, TRANSFER,
CONFERENCE, VOLUME, HEADSET, MUTE/DND, SPEAKERPHONE,
SEND/REDIAL
Advanced Functionality
Customized downloadable ring-tones, SRTP, SIP over TLS, multi-
language support and XML enabled, adjustable positioning angles, wall
mountable, AES encryption, automatic multimedia service (eg., weather
information)
Table 5: GXP1400/1405 Hardware Specifications
GXP1400/1405
LAN Interface
10/100 Mbps Full/Half Duplex Ethernet port with auto detection
Integrated PoE (GXP1405 only)
Graphic LCD Display
Expansion Module
Call Appearance LED
128 x 40 pixel
N/A
2 Dual color (green/red) line keys
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 5 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Universal Switching
Power Adaptor
Dimension
Input: 100-240VAC 50-60 Hz
Output: +5VDC, 800mA, 4.0 W, UL certified
186mm (W) x 210mm (L) x 81mm (D)
Unit weight: 0.7KG
Weight
Package weight: 1.1KG (GXP1400), 1.0KG (GXP1405)
Temperature
Humidity
32 -104° F/ 0 - 40°C
10% - 90% (non-condensing)
Compliance
FCC Part 15 (CFR 47) Class B
EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, EN 60950-1
AS/NZS CISPR 22 Class B, AS/NZS CISPR 24, RoHS
UL 60950 (power adapter)
Table 6: GXP1400/1405 Technical Specifications
Lines
2 lines with 1 SIP account, 3 XML programmable soft-keys
Protocol Support
Support SIP 2.0, TCP/UDP/IP, PPPoE, RTP, SRTP by SDES, HTTP,
ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, SIMPLE/PRESENCE
protocols, TR-069, 802.1x
Support multiple SIP accounts and up to 11 media channels concurrently
Support SIP PUBLISH method (RFC 3903), SIP Presence package
(RFC 3856, 3863) for use of MFKs, SIP Dialog package (RFC 4235)
Support for SIP MESSAGE method (RFC 3428)
Display
Graphic LCD display, up to 4 level grayscale
Feature Keys
HOLD, TRANSFER, CONF, LINE 1, LINE 2, MSG, SPEAKERPHONE,
HANDSET, HEADSET, MUTE/DND, NAVIGATION(5), VOLUME, 3 XML
Programmable Soft keys
Device Management
Audio Features
NAT-friendly remote software upgrade (via TFTP/HTTP) for deployed
devices including behind firewall/NAT
Auto/manual provisioning system, Web GUI Interface
Support Layer 2 (802.1Q, VLAN, 802.1p) and Layer 3 QoS (ToS,
DiffServ, MPLS)
Full-duplex hands-free speakerphone
Advanced Digital Signal Processing (DSP)
Dynamic negotiation of codec and voice payload length
Support for G.723,1 (5.3/6.3K), G.729A/B, G.711 a/µ-law, G.726-32,
G.722 (wide-band), and iLBC codecs
In-band and out-of-band DTMF (in audio, RFC2833, SIP INFO)
Silence Suppression, VAD (voice activity detection), CNG (comfort noise
generation), ANG (automatic gain control)
Acoustic Echo Cancellation (AEC) with Acoustic Gain Control (AGC) for
speakerphone mode, support side tone
Adaptive jitter buffer control (patent-pending) and packet delay and loss
concealment
HD audio handset with HD wideband audio codecs for excellent double-
talk performance
Telephony Features
Intuitive graphic user interface (GUI), downloadable phone book (XML,
LDAP), support for anonymous call using privacy header, MLS (multi
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Firmware version: 1.0.1.83
Page 6 of 36
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
language support)
Voice mail indicator, downloadable custom ring-tones, call hold, call
transfer (attended/blind), call forward, call waiting, caller ID, mute, redial,
call log, caller ID display or block, Do-Not-Disturb (DND) and volume
control
3-way conference, dial plan prefix, dial-plan support, off-hook auto dial,
auto answer and early dial
Network and Provisioning
Via keypad/LCD, Web browser, or secure (AES encrypted) central
configuration file, manual or dynamic host configuration protocol (DHCP)
network setup
Support NAT traversal using IETF STUN and Symmetric RTP
Support for IEEE 802.1p/Q tagging (VLAN), Layer 3 ToS
Firmware
Upgrades
Support firmware upgrade via TFTP or HTTP
Support for Authenticating configuration file before accepting changes
User specific URL for configuration file and firmware files
Mass provisioning using TR-069 or encrypted XML configuration file
Advanced Server Features Message waiting indication, support DNS SRV Look up and SIP Server
Fail Over, Support customizable idle screen via downloading XML by
HTTP/TFTP
Security
User and administrator level passwords, MD5 and MD5-sess based
authentication, AES based secure configuration file, SRTP, TLS, 802.1x
media access control
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Firmware version: 1.0.1.83
Page 7 of 36
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the GXP1400/1405
GETTING FAMILIAR WITH THE LCD
GXP1400/1405 has a dynamic and customizable screen. The screen displays differently depending on
whether the phone is idle or in use (active screen).
Table 7: LCD Display Definition
Display Item
Definitions
Displays the current date and time. It can be synchronized with Internet time
servers
DATE AND TIME
LOGO NAME
Displays company logo name. This logo name can be customized via xml screen
customization. The maximum size for logo name is 22 characters in English
NETWORK
STATUS
Shows the status of network in the middle of the screen. It will indicate whether
the network is down or starting
STATUS BAR
SOFTKEYS
Shows the status of the phone, using icons as shown in the next table
The softkeys are context sensitive and will change depending on the status of
the phone. Typical functions assigned to soft-buttons are:
•
FORWARD ALL Unconditionally forwards the phone line to another
phone
•
•
MISSED CALL This option shows unanswered calls to this phone.
NEXTSCR
Press this button to toggle between idle screen, weather
and IP Address.
•
•
REDIAL
Redials the last dialed-out number
Hangs up the call
END CALL
Table 8: LCD Icons
LCD Icons
Descriptions
SIP Registration Status Icon:
Solid – connected to SIP Server/IP address received
SIP Registration Status Icon:
Blank – SIP Proxy/Server not registered
Handset Status Icon:
OFF - handset on-hook
ON - handset off-hook
Speaker Phone Status Icon:
OFF - speakerphone off
ON - speakerphone on
ON - headset on
Headset Status Icon:
OFF - headset off
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Firmware version: 1.0.1.83
Page 8 of 36
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
DND Icon:
OFF - “Do Not Disturb” disabled
ON - “Do Not Disturb” enabled
Calls Forwarded Icon:
INDICATES calls are forwarded. Please refer to call forwarding procedures
MUTE Icon:
INDICATES call is on MUTE during the call
SRTP Icon:
INDICATES SRTP is enabled for the call
Table 9: GXP1400/1405 KEYPAD BUTTONS
Button
HOLD
Descriptions
Place active call on hold
TRANSFER
Transfer an active call to another number
CONF
Press CONF button to connect Calling/Called party into conference
Switch between Line 1 and Line 2
LINE 1 / LINE 2
Mute an active call; or use as DND button when the phone is in idle state.
Press HEADSET key to answer/hang up phone calls when using headset. It also
allows user to toggle between headset and speaker
Enable/Disable hands-free speaker
Enable/Disable handset mode; or used as SEND/REDIAL
Press the four navigation keys to move up/down/left/right
Press the round button in the center to enter Keypad Configuration “MENU”
mode when phone is idle. Or use it as ENTER key when in Keypad
Configuration
Adjust volume by pressing “– “or “+”
Standard phone keypad; press # key to send call; press * key to for IVR
functions
0 - 9, *, #
MAKING PHONE CALLS
Handset, Headset and Speakerphone
The GXP1400/1405 allows you to make phone calls via handset, headset or speakerphone. During the
active calls the user can switch between the handset, headset and the speakerphone by pressing the
corresponding keys on the phone.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 9 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Lines with SIP Account
GXP1400/1405 can support up to two lines “virtually” mapped to a SIP account. In off-hook state, select an
idle line and the dial tone will be heard. To make a call, select the line you wish to use. The user can switch
lines before dialing any number by pressing the LINE button.
Completing Calls
There are FIVE ways to complete a call:
1. DIAL: To make a phone call.
•
Take Handset off hook
or press SPEAKER button
or press HEADSET button
or press an available LINE key to activate speakerphone
•
•
•
The line will have a dial tone
Enter the phone number
Press “#” or HANDSET button to send
2. REDIAL: To redial the last dialed phone number.
•
Take Handset off-hook
or press the SPEAKER button
or press an available LINE key to activate speakerphone
or on idle screen
•
Press the REDIAL soft-key
3. VIA CALL HISTORY: To call a phone number in the phone’s history.
•
•
Press the MENU button to bring up the Main Menu.
Select Call History and then “Answered Calls”, “Missed Calls” or “Dialed Calls” or etc
depending on your needs
•
•
•
Select phone number using the arrow keys
Press OK to select
Select and press “Dial” to dial out
4. VIA PHONEBOOK: To Call a phone in from the phone’s phonebook.
•
Go to the phonebook by pressing the DOWN arrow key or pressing the menu button and
selecting “Phone Book”
•
•
•
Select the phone number by using the arrow keys
Press OK to select
Select and press “Dial” to dial out
5. VIA PAGE/INTERCOM: Server/PBX has to support Page/Intercom. Also, GXP1400/1405 and PBX have
to be configured correctly.
•
Take Handset off hook
or press SPEAKER button
or press HEADSET button
or press an available LINE key to activate speakerphone
•
Press OK and the screen will display “LINEx: PAGE”
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 10 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Dial the number to Page/Intercom
Press “SEND” button to dial out
NOTE:
•
Dial-tone and dialed number display occurs after the handset is off-hook, or handset button is
pressed, or speaker button is pressed, or the line key is selected. After dialing the number, the
phone waits 4 seconds (by default; No key Entry Timeout) before sending and initiating the call.
Press “#” button to override the 4 second delay.
Making Calls using IP Addresses
Direct IP Call allows two phones to talk to each other in an ad-hoc fashion without a SIP proxy. VoIP calls
can be made between two phones if:
•
•
•
Both phones have public IP addresses, or
Both phones are on a same LAN/VPN using private or public IP addresses, or
Both phones can be connected through a router using public or private IP addresses (with necessary
port forwarding or DMZ)
To make a direct IP call, please follow these steps:
•
•
•
•
•
Press MENU button to bring up MAIN MENU
Select “Direct IP Call” using the arrow-keys
Press OK to select
Input the 12-digit target IP address. (Please see example below)
Press OK key to initiate call.
For example: If the target IP address is 192.168.1.60 and the port is 5062 (e.g. 192.168.1.60:5062), input
the following: 192*168*1*60#5062. The “*” key represents the dot “.”; the “#” key represents colon “:”. Press
OK to dial out.
The GXP1400/1405 also supports Quick IP Call mode. This enables the phone to make direct IP-calls,
using only the last few digits (last octet) of the target phone’s IP-number. This is possible only if both phones
are in under the same LAN/VPN. This simulates a PBX function using the CMSA/CD without a SIP server.
Controlled static IP usage is recommended.
To enable Quick IP calls, the phone has to be setup first. This is done through the web-setup function. In the
“Advanced Settings” page, set the "Use Quick IP-call mode” to “Yes”. When #xxx is dialed, where x is 0-9
and xxx <=255, a direct IP call to aaa.bbb.ccc.XXX is completed. “aaa.bbb.ccc” is from the local IP address
regardless of subnet mask. The numbers #xx or #x are also valid. The leading 0 is not required (but OK).
For example:
192.168.0.2 calling 192.168.0.3 -- dial #3 followed by #
192.168.0.2 calling 192.168.0.23 -- dial #23 followed by #
192.168.0.2 calling 192.168.0.123 -- dial #123 followed by #
192.168.0.2: dial #3 and #03 and #003 results in the same call -- call 192.168.0.3
NOTE:
•
If you have a SIP Server configured, a Direct IP-IP still works. If you are using STUN, the Direct IP-IP
call will also use STUN. Configure the “Use Random Port” to “No” when completing Direct IP calls.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 11 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING PHONE CALLS
Receiving Calls
1. Incoming single call: Phone rings with selected ring-tone. The corresponding LINE flashes in red.
Answer call by taking Handset off hook or pressing SPEAKER or HEADSET or by pressing the
corresponding account LINE button.
2. Incoming multiple calls: When another call comes in while having an active call, the phone will
produce a Call Waiting tone (stutter tone). Answer the incoming call by pressing its corresponding
LINE button. The current active call will be put on hold.
Do Not Disturb
Do Not Disturb can be enabled/disabled by pressing the MUTE/DND button on the phone. Or users
could set it from the MENU following the steps below.
1. Press the MENU button and scroll down to “Preference”.
2. Select “Do Not Disturb” by pressing menu button.
3. Use arrow keys to either enable or disable “Do Not Disturb” feature.
4. When enabled, there will be a special ‘Do Not Disturb” icon appearing on the display. This will send
the incoming caller directly to voicemail.
PHONE FUNCTIONS DURING A PHONE CALL
Call Waiting/Call Hold
1. Hold: Place a call on ‘hold’ by pressing the “HOLD” button.
2. Resume: Resume call by pressing the corresponding blinking LINE.
3. Multiple Calls: Automatically place ACTIVE call on ‘HOLD’ by selecting another available LINE to
place or receive another call. Call Waiting tone (stutter tone) audible when line is in use.
Mute
1. During the call, press the MUTE button to enable/disable muting the microphone.
2. The “Line Status Indicator” will show “LINEx: TALKING” or “LINEx: MUTE” to indicate whether the
microphone is muted.
Call Transfer
GXP1400/1405 supports both Blind and Attended transfer. Also, users could make auto-attended transfer
when this feature is enabled from web GUI.
1. Blind Transfer: Press “TRANSFER” button, then dial the number and press the # button to
complete transfer of active call.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 12 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Attended Transfer: Press “LINEx” button to make a call and automatically place the ACTIVE LINE
on HOLD. Once the call is established, press “TRANSFER” key then the LINE button of the waiting
line to transfer the call. Hang up the phone call after the call is transferred.
3. Auto-Attended Transfer: Users could enable Auto-Attended Transfer under Web GUI->Advanced
Setting Page. During the first call, press “TRANSFER” hard button and it will bring up another line.
The first call will be on hold. Enter the number and press SEND or “#” key to establish the second
call. After the second call is established, users could press “TRANSFER” hard button to transfer the
call, or press the SPLIT soft key so the second call will be resumed.
NOTE:
•
To transfer calls across SIP domains, SIP service providers must support transfer across SIP
domains.
3-Way Conferencing
GXP1400/1405 can host conference calls and supports up to 3-way conference calling.
1. Initiate a Conference Call:
.
.
.
Establish a connection with two parties
Press CONF button
Choose the desired line to join the conference by pressing the corresponding LINE button
2. Cancel Conference:
.
If after pressing the “CONF” button, a user decides not to conference anyone, press HOLD
or the original LINE button
.
This will resume two-way conversation
3. End Conference:
.
.
Press HOLD to end the conference call and put all parties on hold
To speak with an individual party, select the corresponding LINE key
GXP1400/1405 also supports Easy Conference mode. In Easy Conference mode, users can initiate
conference by calling another number when the current line is in talking or conference. Also the conference
can be re-established by pressing the ReConf softkey when the conference is on hold. Easy Conference
mode can be used combined with the traditional ways to establish 3-way conference.
1. Initiate a Conference Call:
.
.
.
.
Establish one call
Press CONF button and a new line will be brought up
Dial the number and press SEND button to establish the second call
Press CONF button again or press the ConfCall softkey to establish the 3-way conference
2. Hold Conference:
.
During the conference, press HOLD button and the conference will be put on hold
-
-
To resume the conference, press the ReConf softkey
To split the conference and resume the call with each party, press the
corresponding line key
-
3. End Conference:
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 13 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
If the users decide not to conference after establishing the second call, press EndCall
softkey instead of ConfCall softkey/CONF button. It will end the second call and the screen
will show the first call is on hold.
During the conference, press EndCall softkey or hang up to end the conference
NOTE:
•
The party that starts the conference call has to remain in the conference for its entire duration, you
can put the party on mute but it must remain in the conversation. Also, this is not applicable when the
feature “Transfer on call hangup” is turned on.
•
When using Easy Conference mode, press SEND button to establish the second call after entering
the number instead of using “#”.
Voice Messages (Message Waiting Indicator)
A blinking red MWI (Message Waiting Indicator) on the top right corner of the GXP1400/1405 indicates a
message is waiting. Dial into the voicemail box to retrieve the message. An IVR will prompt the user through
the process of message retrieval.
Shared Call Appearance (SCA)
The GXP1400/1405 phone supports shared call appearance by Broadsoft standard. This feature allows
members of the SCA group to shared SIP lines and provides status monitoring (idle, active, progressing,
hold) of the shared line. When there is an incoming call designated for the SCA group, all of the members of
the group will be notified of an incoming call and will be able to answer the call from the phone with the SCA
extension registered.
All the users that belong to the same SCA group will be notified by visual indicator when a user seizes the
line and places an outgoing call, and all the users of this group will not be able to seize the line until the line
goes back to an idle state or when the call is placed on hold. (With the exception of when multiple call
appearances are enabled on the server side).
In the middle of the conversation, there are two types of hold: Public Hold and Private Hold. When a member
of the group places the call on public hold, the other users of the SCA group will be notified of this by the red-
flashing button and they will be able to resume the call from their phone by pressing the line button. However,
if this call is placed on private-hold, no other member of the SCA group will be able to resume that call.
To enable shared call appearance, the user would need to register the shared line account on the phone. In
addition, they would need to navigate to “Settings”->”Basic Settings” on the web UI and set the line to
“Shared Line”. If the user requires more shared call appearances, the user can configure multiple line
buttons to be “shared line” buttons associated with the account.
CALL FEATURES
The GXP1400/1405 supports traditional and advanced telephony features including caller ID, caller ID
w/name, call forward/transfer/park/hold as well as intercom/paging.
Table 10: GXP1400/1405 Call Features
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 14 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Key
*30
Call Features
Block Caller ID (for all subsequent calls)
Offhook and dial “*30”.
*31
*67
*82
*70
*71
*72
Send Caller ID (for all subsequent calls)
Offhook and dial “*31”.
Block Caller ID (per call)
Offhook, dial “*67” and then enter the number to dial out.
Send Caller ID (per call)
Offhook, dial “*82” and then enter the number to dial out.
Disable Call Waiting (per Call)
Offhook, dial “*70” and then enter the number to dial out.
Enable Call Waiting (per Call)
Offhook, dial “*71” and then enter the number to dial out.
Unconditional Call Forward
Offhook, dial “*72”. Then enter the number to forward the call and press “#” or OK
softkey.
*73
*90
Cancel Unconditional Call Forward
Offhook, dial “*73” and the phone will hang up.
Busy Call Forward
Offhook, dial “*90”. Then enter the number to forward the call and press “#” or OK
softkey.
*91
*92
Cancel Busy Call Forward
Offhook, dial “*91” and the phone will hang up.
Delayed Call Forward
Offhook, dial “*92”. Then enter the number to forward the call and press “#” or OK
softkey.
*93
Cancel Delayed Call Forward
Offhook, dial “*93” and the phone will hang up.
CUSTOMIZED LCD SCREEN & XML
GXP1400/1405 IP phone support both simple and advanced XML applications: 1) XML Custom Screen and 2)
XML Downloadable Phonebook. For more information on how to create a downloadable XML phonebook, creating
a custom idle screen and/or reprogramming the soft-keys on GXP1400/1405, please visit our website at
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 15 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Guide
The GXP1400/1405 can be configured in two ways. Firstly, using the Key Pad Configuration Menu on the phone;
secondly, through embedded web-configuration menu.
CONFIGURATION VIA KEYPAD
To enter the MENU, press the round button. Navigate the menu by using the arrow keys: up/down and left/right.
Press the OK softkey to confirm a menu selection. Press left arrow key can exit to the previous menu. The phone
automatically exits MENU mode with an incoming call, the phone is off-hook or the MENU mode if left idle for 20
seconds.
Press the MENU button to enter the Key Pad Menu. The menu options available are listed in table 11.
Table 11: Key Pad Configuration Menu
Item
Description
Call History
Displays histories of answered, dialed, missed, and transferred and forwarded
calls. Select “Clear All” to clear all the call history entries.
Status
Displays the network status, account status, software version and hardware
version of the phone.
Press network status to enter the sub menu for IP setting information
(DHCP/Static IP/PPPoE), Subnet Mask, Gateway and DNS server.
Phone Book
Displays the phonebook and downloads phonebook XML
Displays the LDAP directory and downloads directory
Goes to instant messages
LDAP Directory
Instant Messages
Direct IP Call
Preference
Dials IP address for direct IP call
Press Menu button to enter this sub menu including:
•
Do NOT Disturb
DND (Do Not Disturb) function could be turned on or off in the “Do Not
Disturb” menu.
•
•
Ring Tone
Choose different ring tones in the “Ring Tone” menu.
Ring Volume
Press Menu button to hear the selected ring volume, press ‘←’ or ’ →’
to hear and adjust the ring tone volume.
LCD Contrast
Press ‘←’ or ’ →’ to adjust the LCD contrast.
Download SCR XML
The phone will download the custom idle screen if available.
Erase Custom SCR
•
•
•
Custom idle screen will be erased and will be replaced with default
logo.
•
Display Language
Users can choose English, Simplified Chinese, Traditional Chinese,
Korean, Japanese, Italian, Spanish, French, German, Portuguese,
Russian, Croatian, Hungarian, Polish, Slovenian, Arabic, Hebrew or
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 16 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Dutch which are built in the phone. Users could select Automatic for
local language based on IP location if available. Also, the phone will
download secondary language if available.
•
Time Settings
Users can set the date and time on the phone.
Press Menu button to choose the menu item
Press ‘←’ or follow the soft keys to return to the main menu
Config
Press Menu button to display the configuration selections:
•
SIP
To change SIP server settings for SIP account (SIP Proxy, Outbound
Proxy, SIP User ID, SIP Auth ID, SIP Password, SIP Transport and
Audio).
•
•
Upgrade
To configure the firmware server and Config server for upgrading or
provisioning the phone.
Factory Reset
Key in the physical/MAC address on the back of the phone.
Press OK softkey to reset to FACTORY DEFAULT setting. Do not use
Factory Reset unless you want to restore factory settings.
Layer 2 QoS
•
Configure 802.1Q/VLAN Tag and priority value.
Press Menu to display the factory function items including
Factory Functions
•
Audio Loopback
Speak into the handset. If you hear your voice in the handset, your audio
is working fine. Press Menu button to exit the mode.
Diagnostic Mode
•
All LEDs will light up.
Press any key on the keypad, to display the button name in the LCD. Lift
and put back the handset or press Menu button to exit the diagnostic
mode.
Press ‘←’ to return the main menu
Network
To select IP mode (DHCP/Static IP/PPPoE); to setup PPPoE, IP address,
Netmask, Gateway address and DNS Server 1 and DNS Server 2.
Call Features
To enable/disable and configure Forward All, Forward Busy, Forward No Answer,
No Answer Timeout, select Call Features and press Account 1 to set the forward
call features.
Reboot
Exit
Select on Reboot and press Menu button to reboot the device.
Exit from this menu.
Table 12: Keypad GUI Flow
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 17 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Call History
Call History Items
Delete All Entries
New Entry
Answered Calls
Dialed Calls
Missed Calls
Transferred Calls
Forwarded Calls
Clear All
First Name:
Last Name
Number:
Back
Acct:
MENU
Confirm Add:
Cancel & Return:
Phone Book
New Entry
Search Configuration
Download Phonebook XML
Delete All Entries
Back
Select Filter
Filter Value
Back
LDAP Directory
Call History
Status
Do Not Disturb
View Directory
Download Directory
Search Configuration
Back
Enable DND
Disable DND
Back
Phone Book
LDAP Directory
Instant Message
Ring Tone
Clear All
Back
Default Ring
Ring1
Ring2
Ring 3
Back
Preference
Instant
Message
Do Not Disturb
Ring Tone
SIP
Ring Volume
Direct IP Call
Preference
Config
Account
LCD Contrast
Download SCR XML
Erase Custom SCR
Display Language
Time Settings
Back
SIP Proxy
Outbound Proxy
SIP User ID
SIP Auth ID
SIP Password
SIP Transport
Audio
Config
Save
Cancel
Factory
Functions
SIP
Upgrade
Factory Reset
Layer 2 QoS
Back
Upgrade
Network
Call Features
Reboot
Firmware Server
Config Server
Upgrade Via
Back
Factory Function
Audio Loopback
Diagnostic Mode
Back
Layer 2 QoS
802.1Q/VLAN Tag
Priority value
Reset Vlan Config
Back
Network
Exit
IP Setting
PPPoE Settings
IP
Diagnostic Mode
Netmask
Gateway
Keypad/LED Diagnostic
DNS Server 1
DNS Server 2
Back
Account 1
Forward All
Forward Busy
Forward No Answer
No Answer Timeout
Call Features
Account 1
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Firmware version: 1.0.1.83
Page 18 of 36
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURATION VIA WEB BROWSER
The GXP1400/1405 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded
HTML pages allow a user to configure the IP phone through a Web browser such as Microsoft’s IE, Mozilla
Firefox and Google Chrome.
Access the Web Configuration Menu
To access the phone’s Web Configuration Menu
•
•
•
•
•
Connect the computer to the same network as the phone1
Make sure the phone is turned on and shows its IP address
Start a Web browser on your computer
Enter the phone’s IP address in the address bar of the browser2
Enter the administrator’s password to access the Web Configuration Menu3
1
2
3
The Web-enabled computer has to be connected to the same sub-network as the phone. This can easily
be done by connecting the computer to the same hub or switch as the phone is connected to. In absence
of a hub/switch (or free ports on the hub/switch), please connect the computer directly to the phone using
the PC port on the phone.
If the phone is properly connected to a working Internet connection, the phone will display its IP address in
Menu->Status. This address has the format: xxx.xxx.xxx.xxx, where xxx stands for a number from 0 to 255.
You will need this number to access the Web Configuration Menu. For example, if the phone shows
The default administrator password is “admin”; the default end-user password is “123”.
NOTE:
•
When changing any settings, always SUBMIT them by pressing “UPDATE” button on the bottom of
the page. Reboot the phone to have the changes take effect. If, after having submitted some
changes, more settings have to be changed, press the menu option needed.
•
All the options under Basic Setting and Account Setting, and most of the options under Advanced
Setting do not require reboot after submitting the changes. Under Advanced Setting, the parameters
on network configuration require reboot after update.
Definitions
This section will describe the options in the Web configuration user interface. As mentioned, a user can log in
as an administrator or end-user.
Functions available for the end-user are:
•
Status: Displays the network status, account status, software version and MAC address of the
phone, and service status.
•
Basic Settings: Basic preferences such as date and time settings, line keys and LCD settings can
be set here.
Additional functions available to administrators are:
•
Advanced Settings: To set advanced network settings, codec settings, XML configuration settings
and etc.
•
Account: To configure the SIP account.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 19 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 13: Device Configuration - Status
MAC Address
IP Address
The device ID, in HEXADECIMAL format.
This field shows IP address of GXP1400/1405.
This field contains the product model information.
This field contains the product part number.
Product Model
Part Number
Software Version
• Program: This is the main firmware release number, which is always used for
identifying the software (or firmware) system of the phone.
• Boot: Booting code version number
• Core: Core code version number
• Base: Base code version number
• DSP: DSP code version number
• Aux: Aux code version number
System Up Time
System Time
Registered
This field shows system up time since the last reboot.
This field shows the current time on the phone system.
Indicates whether accounts are registered to the related SIP server.
PPPoE Link Up
Indicates whether the PPPoE connection is enabled (connected to a modem) and the
NAT type.
Service Status
Core Dump
• GUI: shows the GUI status: running or stopped
• Phone: shows the phone status: running or stopped
Download core dump file for troubleshooting when necessary.
Table 14: Device Configuration – Settings/Basic Settings
End User Password
IP Address
This contains the password to access the Web Configuration Menu. This field is case
sensitive with a maximum length of 25 characters.
The GXP1400/1405 operates in three modes:
1. DHCP mode: The GXP1400/1405 acquires its IP address from the first
DHCP server it discovers on its LAN. The DHCP option is reserved for NAT
router mode. In DHCP mode, all the field values for the Static IP mode are
not used (even though they are still saved in the Flash memory).
2. PPPoE mode: To use the PPPoE feature, set the PPPoE account settings
(PPPoE account ID, PPPoE password and PPPoE service name). The
GXP1400/1405 establishes a PPPoE session if any of the PPPoE fields is
set.
3. Static IP mode: Configure all of the following fields: IP address, Subnet
Mask, Gateway, DNS Server 1, DNS Server 2 and Preferred DNS Server.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 20 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
802.1x Mode
This option allows the user to enable/disable 802.1x mode on the phone. The default
value is disabled. To enable 802.1x mode, this field should be set to EAP-MD5. Once
enabled, the user would be required to enter the following information below to be
authenticated on the network:
•
•
Identity
MD5 Password
Line Keys x
Time Zone
This allows the user to configure the account mapped to each line key, as well as
enabling SCA (Shared Call Appearance) for the line.
Options available for Key Mode are :
1. Line
2. Shared Line
This parameter controls the date/time display according to the specified time zone.
If “Allow DHCP Option 2 to override Time Zone setting” is checked, the time zone will
be overridden by the DHCP server.
Self-Defined Time
Zone
This parameter allows the users to define their own time zone.
The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0
MTZ+6MDT+5,
This indicates a time zone with 6 hours offset with 1 hour ahead which is U.S central
time. If it is positive (+) if the local time zone is west of the Prime Meridian (A.K.A:
International or Greenwich Meridian) and negative (-) if it is east.
M4.1.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd
Tuesday…)
The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon, Tues, … ,Sat)
Therefore, this example is the DST which starts from the first Sunday of April to the
1st Sunday of November.
Weather Update
By default, “Enable Weather Update:” is set to “Yes”. If set to “No”, weather
information will not display on the phone.
Settings to customize the display of weather via:
•
•
•
City Code – Automatic or enter city code (default is Automatic)
Update Interval – Refresh time in minutes (default is 5 mins)
Degree Unit – Select Automatic, Fahrenheit or Celsius (default is Automatic)
This is displayed when “Enable Weather Update” is set to “Yes” and pressing the
‘SwitchSCR’ soft-key once.
LCD Contrast
Set LCD contrast. Range from 0 to 20.
Time Display Format
LCD time display in 12 hour or 24 hour format.
Disable in-call DTMF
display
Default is “No”. This field is used to hide the keypad input during a call.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 21 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
HEADSET Key Mode
Default Mode:
-
-
Toggle to Headset when using Speaker/Handset
Dial, pick up call or hang up call using Headset
Toggle Headset/Speaker:
-
toggle between using Headset and using Speaker
Headset TX gain (dB)
Headset RX gain (dB)
Set headset TX gain to -6, 0 or +6. Default is 0 db.
Set headset RX gain to -6, 0 or +6. Default is 0 db.
Table 15: Device Configuration – Settings /Advanced Settings
Admin
Administrator password. Only the administrator can access the “Advanced Settings”
Password
and “Account Settings” page. Password field is purposely blank for security reasons
after clicking update and saved. The maximum password length is 25 characters.
Layer 3 QoS
Layer 2 QoS
Local RTP port
This field defines the layer 3 QoS parameter. It is the value used for IP Precedence
or Diff-Serv or MPLS. Default value is 12.
This contains the value used for layer 2 802.1Q/VLAN tag and 802.1p priority value.
Default setting is 0.
This parameter defines the local RTP port pair used to listen and transmit. It is the
base RTP port for channel 0. When configured, channel 0 will use this port _value
for RTP; channel 1 will use port_value+2 for RTP. Local RTP port ranges from 1024
to 65400 and must be even. The default value is 5004.
Use Random Port
Keep-alive interval
This parameter, when set to “Yes”, will force random generation of both the local
SIP and RTP ports. This is usually necessary when multiple GXPs are behind the
same NAT. Default is “No”.
This parameter specifies how often the GXP1400/1405 sends a blank UDP packet
to the SIP server in order to keep the “hole” on the NAT open. Default is 20
seconds.
Use NAT IP
NAT IP address used in SIP/SDP message. Default is blank.
STUN Server
IP address or Domain name of the STUN server. STUN resolution result will display
in the STATUS page of the Web UI.
Firmware Upgrade and
Provisioning
Allows the user to select the following options for firmware upgrade:
•
•
•
Always Check for New Firmware
Check New Firmware only when F/W pre/suffix changes
Always Skip the Firmware Check.
Firmware upgrade may take up to 10 minutes depending on network environment.
Do not interrupt the firmware upgrading process.
Note: Grandstream strongly recommends that the user upgrade firmware locally in
a LAN environment if using TFTP to upgrade. Please DO NOT interrupt the
upgrade process (especially the power supply) as this will damage the device.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 22 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
XML Config File
Password
The password used for encrypting the XML configuration file using OpenSSL. This
is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User Name The user name for the HTTP/HTTPS server.
HTTP/HTTPS Password The password for the HTTP/HTTPS server. It won’t display for security protection.
Upgrade Via
This field allows the user to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Firmware Server Path
Config Server Path
Defines the server path for the firmware server. It can be different from the
Configuration server which is used for provisioning.
Defines the config server path for provisioning; it can be different from the Firmware
server.
Firmware File
Prefix/Postfix
Default is blank. If configured, GXP1400/1405 will request the firmware file with the
prefix/postfix and only the firmware with the matching encrypted prefix will be
downloaded and flashed into the phone.
This setting is useful for ITSPs. End user should keep it blank.
Config File
Prefix/Postfix
Default is blank. If configured, GXP1400/1405 will request the config file with the
prefix/postfix and only the file with the matching encrypted prefix will be downloaded
and flashed into the phone.
This setting is useful for ITSPs. End user should keep it blank.
Allow DHCP Option 43
and Option 66 to
override server
Default is “Yes”. This allows device to get provisioned from the server automatically.
Automatic Upgrade
This function is used by ITSP. End user should NOT touch these parameters.
Default is “No”. Choose “Yes” to enable automatic HTTP upgrade and provisioning.
In “Check for upgrade every” field, enter the number of minutes to check the HTTP
server for firmware upgrade or configuration changes. When set to “No”, the phone
will only perform HTTP upgrade and configuration check once at boot up.
Authenticate Conf File
Default is “No”. If set to “Yes”, configuration file would be authenticated before
acceptance. End user should use default setting.
Enable TR-069
Default is “No”.
ACS URL
URL for TR-069 Auto Configuration Servers (ACS).
Enter username for TR-069.
TR-069 Username
TR-069 Password
Periodic Inform Enable
Enter password for TR-069.
Enable periodic inform. Default is “No”.
Periodic Inform Interval When enabling periodic inform, set up the periodic inform interval.
Connection Request
Username
Enter the connection request username.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 23 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Request
Password
Enter the connection request password.
Authentication Method
Select the authentication method among “No authentication”, “Basic” or Digest.
Enter the connection request port.
Connection Request
Port
Phonebook XML
Download
Selects the file download mode for the download server. Users can choose from
TFTP/HTTP/No.
Phonebook XML Server The URL/IP address of the phonebook download server.
Path
Phonebook Download
Interval
The interval at which the phonebook will be downloaded from the download server
(in Minutes). The default setting is 0.
Remove Manually-edited If set to “Yes”, the phone will remove the manually-edited entries in the old
entries on Downloads
phonebook list before downloading the new file. The default setting is set to “Yes”.
LDAP Directory
IP address or domain name of LDAP script server.
Idle Screen XML
Download
Enable XML Idle Screen download via TFTP or HTTP. Select whether to “Use
Custom Filename” or not, and define the “XML server path”.
Download Screen XML
At Boot-up
The phone will download the idle screen xml file if set to “Yes”. The default setting
is “No”.
Use custom filename
The phone will use custom filename specified in XML server path if set to “Yes”.
The default setting is “No”.
Idle Screen XML Server Specify the idle screen XML server path.
Path
Offhook Auto Dial
Syslog Server
To configure a User ID/extension to dial automatically when the phone is taken
offhook.
The IP address or URL of System log server. This feature is especially useful for
ITSPs.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 24 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Syslog Level
Select the ATA to report the log level. Default is NONE. The level is one of DEBUG,
INFO, WARNING or ERROR. Syslog messages are sent based on the following
events:
•
•
•
•
•
•
•
•
•
•
product model/version on boot up (INFO level)
NAT related info (INFO level)
sent or received SIP message (DEBUG level)
SIP message summary (INFO level)
inbound and outbound calls (INFO level)
registration status change (INFO level)
negotiated codec (INFO level)
Ethernet link up (INFO level)
SLIC chip exception (WARNING and ERROR levels)
memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains
the following components: GS_LOG: [device MAC address][error code] error
message.
For example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000].
Ethernet link is up.
Send SIP Log
NTP server
When setting the “Yes”, phone will send out SIP Log to syslog server. Default
setting is “No”.
This parameter defines the URI or IP address of the NTP (Network Time Protocol)
serve. It is used to display the current date/time.
Allow DHCP Option 42
to override NTP server
Default is “Yes”. This allows device gets provisioned for DHCP Option 42 from the
server automatically.
SSL Certificate
SSL Private Key
This defines the SSL certificate needed to access certain websites.
This defines the SSL Private key.
SSL Private Key
Password
This defines the SSL private key password.
Distinctive Ring Tone
Caller ID must be configured. Select a Distinctive Ring Tone 1 through 3 for a
particular Caller ID. The GXP1400/1405 will ONLY use selected ring tones for
particular Caller IDs. For all other calls, the GXP1400/1405 will use System Ring
Tone. When selected and no Caller ID is configured, the selected ring tone will be
used for all incoming calls.
System Ring Tone
System ring tone. Default is North American standard.
Adjust system ring tone frequencies and cadences based on local telecom
standard.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 25 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Progress Tones
Using these settings, users can configure ring or tone frequencies based on
parameters from local telecom. By default, they are set to North American standard.
Frequencies should be configured with known values to avoid uncomfortable high
pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing (“On time” in ‘ms’) while OFF is the period of silence. In
order to set a continuous ring, OFF should be zero. Otherwise it will ring ON ms
and a pause of OFF ms and then repeat the pattern. Up to three cadences are
supported.
Disable Call Waiting
Default is “No”. If set to “Yes”, the call waiting feature will be disabled.
Default is “No”. If set to “Yes”, the call waiting tone will be disabled.
Disable Call
Waiting Tone
Disable Direct IP Calls
Default is “No”. If set to “Yes”, direct IP calls will be disabled.
Use Quick IP Call Mode Dial an IP address under the same LAN/VPN segment by entering the last octet in
the IP address.
In the Advanced Settings page there is an option “Use Quick IP-call mode”. Default
setting is “No”. When set to “Yes”, and #XXX is dialed, where X is 0-9 and XXX
<=255, phone will make direct IP call to aaa.bbb.ccc.XXX where aaa.bbb.ccc
comes from the local IP address REGARDLESS of subnet mask.
#XX or #X are also valid so leading 0 is not required (but OK). See Quick IP Call
Mode for details.
Disable Conference
Disable DND Button
Disable Transfer
Default is “No”. If set to “Yes”, conference will be disabled.
Default is “No”. If set to “Yes”, the “DND” button on keypad will be disabled.
Default is “No”. If set to “Yes”, transfer will be disabled.
Auto-Attended Transfer Default is “No”. If set to “Yes”, the phone will use attended transfer by default.
Configuration via
Keypad Menu
Configures the access control of configurations via the phone keypad menu. There
are three modes:
•
•
Unrestricted
Basic Settings Only:
CONFIG option will not display in keypad MENU
•
Constraint Mode:
CONFIG, FACTORY FUNCTIONS and NETWORK options will not display
in keypad MENU
Enable STAR key
Keypad locking
If enabled, when the phone is in idle screen, press and hold STAR key for 4
seconds and the keypad will be locked. The password to lock/unlock can be
configured.
Do not escape “#” as
%23 in SIP URI
Default is “No”. By default, # will be replaced as %23 in SIP URI.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 26 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Language
Allows user to choose preferred display language in web UI and keypad UI.
Currently, the phone supports these languages: Arabic, German, English, Spanish,
French, Hebrew, Croatian, Hungarian, Italian, Japanese, Korean, Dutch, Polish,
Portuguese, Russian, Slovenian, Simplified Chinese and Traditional Chinese.
Note: The “Automatic” setting in language refers to Grandstream’s IP2Location
client which when connected to Internet would attempt to lookup a database (driven
by Grandstream) with the IP address for its geographical location.
Language file postfix allows the language file to have different postfixes so the
phone can request a particular file. It will append an underscore "_" plus the string
in the language file postfix.
The default language file name is "gxp.txt". If the field “Language File postfix “has
"NL" string in it, then the phone will request "gxp_NL.txt" instead of "gxp.txt".
User can only load one secondary language.
Supported downloadable language: Czech, Croatian, Estonian, French, German,
Italian, Polish, Portuguese, Slovak, Slovenian and Spanish.
How to set up Download Language:
This is similar to updating firmware in your local network environment.
1. Get the language file gxp.txt ready. Make sure the file is using UTF-8 encoding.
2. Copy gxp.txt to the firmware server directory using your local TFTP or HTTP
server.
3. Access the advanced settings of the Web GUI, set “Display Language” to
“Download Language” and enter the server path in Firmware Server Path. Select
TFTP or HTTP for firmware upgrade.
4. Update and reboot the phone.
Table 16: SIP Account Settings
Account Name
SIP Server
The name associated with each account - displayed on LCD.
SIP Server’s IP address or Domain name provided by VoIP service provider.
This field allows administrator to configure a backup SIP Server.
Secondary SIP Server
Outbound Proxy
IP address or Domain name of Outbound Proxy, Media Gateway, or Session Border
Controller. Used for firewall or NAT penetration in different network environment. If
the system detects symmetric NAT, STUN will not work. ONLY outbound proxy can
provide solution for symmetric NAT.
SIP User ID
User account information provided by VoIP service provider (ITSP); either an actual
phone number or formatted like one.
Authenticate ID
SIP service subscriber’s Authenticate ID used for authentication. It can be identical
to or different from SIP User ID.
Authenticate Password SIP service subscriber’s account password for GXP1400/1405 to register to (SIP)
servers of ITSP.
Name
SIP service subscriber’s name that is used for Caller ID display.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Firmware version: 1.0.1.83
Page 27 of 36
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
DNS Mode
Primary IP
The default is set to A Record. If users wish to locate the server by DNS SRV, users
may select SRV or NATPTR/SRV. When "Use Configured IP" option is selected, if
SIP server is configured as domain name, phone will not send DNS query, but use
"Primary IP" or "Secondary IP" to send sip message if at least one of them are not
empty.
This option applies only if “Use Configured IP” is selected, the phone will send DNS
query to the Primary IP. Insert IP address here.
Backup IP 1
Backup IP 2
TEL URI
Insert the first back up IP here.
Insert the second back up IP here.
Default is “Disabled”. Users can enable it or select USER=PHONE.
SIP Registration
This parameter controls sending REGISTER messages to the proxy server. The
default setting is “Yes”.
Unregister on Reboot
Register Expiration
Default is “No”. If set to “Yes”, the SIP user’s registration information will be cleared
on reboot.
This parameter allows user to specify the time frequency (in minutes) that
GXP1400/1405 refreshes its registration with the specified registrar. The default
interval is 60 minutes. The maximum interval is 65,535 minutes (about 45 days).
Reregister Before
Expiration
This parameter allows user to specify the time frequency (in seconds) that
GXP1400/1405 sends out a re-registration request before the Register Expiration.
By default is 0 second.
Local SIP Port
This parameter defines the local SIP port used to listen and transmit. The default
value is 5060.
SIP Registration Failure Retry registration if the process failed. Default is 20 seconds.
Retry Wait Time
SIP T1 Timeout
SIP T2 Interval
SIP Transport
RFC 3261 SIP T1 timer. Default is 0.5 second.
RFC 3261 SIP T2 timer. Default is 4 seconds.
Choose SIP Transport between UDP and TCP. Default is UDP.
Select “sip:” or “sips:”. Default is “sips:”.
SIP URI Scheme when
using TLS
Use Actual Ephemeral
Port in Contact with
TCP/TLS
Enable to use actual ephemeral port in contact with TCP/TLS. Default is “No”.
Check Domain
Certificates
Enable to check the domain certificate. Default is “No”.
Remove OBP from
Route
The SIP Extension notifies the SIP server that it is behind a NAT/firewall.
Validate Incoming
Messages
This configuration selects whether or not the incoming messages should be
validated.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 28 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Support SIP Instance ID Selects whether or not SIP Instance ID is supported.
NAT Traversal
This parameter activates the NAT traversal mechanism. It has options: No, STUN,
Keep-Alive, UPnP, Auto, VPN.
If selecting STUN and a STUN server is also specified, the phone performs
according to the STUN client specification. Using this mode, the embedded STUN
client detects if and what type of NAT/Firewall configuration is used. If the detected
NAT is a Full Cone, Restricted Cone, or a Port-Restricted Cone, the phone will use
its mapped public IP address and port in all of its SIP and SDP messages.
If selecting Keep-Alive with no specified STUN server, the GXP1400/1405 will
periodically (every 20 seconds or so) send a blank UDP packet (with no payload
data) to the SIP server to keep the “hole” on the NAT open.
SUBSCRIBE for MWI
Default is “No”. When set to “Yes”, a SUBSCRIBE for Message Waiting Indication
will be sent periodically.
SUBSCRIBE for
Registration
Default is “No”. When set to “Yes” a SUBSCRIBE for Registration will be sent
periodically.
Feature Key
Synchronization
Default is “No”. This option is to synchronize DND/Call Forward features with
Broadsoft. When set to “Yes”, a SUBSCRIBE will be sent out periodically to the
server. Then when DND/Call Forward features (Call Forward No Answer,
Unconditional Call Forward and Call Forward on Busy) are configured or changed
on the phone and the Broadsoft server side, those features will be synchronized on
the phone side and the Broadsoft server side.
PUBLISH for Presence Enable Presence feature.
Proxy-Require
SIP Extension to notify SIP server that the unit is behind the NAT/Firewall.
Voice Mail UserID
When configured, user can access messages by pressing “MSG” button. This ID is
usually the VM portal access number.
Send DTMF
This parameter specifies the mechanism to transmit DTMF digit. There are 3
supported modes: in audio which means DTMF is combined in audio signal (not
very reliable with low-bit-rate codec), via RTP (RFC2833), or via SIP INFO.
DTMF Payload Type
Early Dial
Sends DTMF using RFC2833. The default is 101.
Default is “No”. Use only if proxy supports 484 responses.
Sets the prefix added to each dialed number.
Dial Plan Prefix
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 29 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Dial Plan
Dial Plan Rules:
1. Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d
2. Grammar: x - any digit from 0-9;
a) xx+ - at least 2 digit numbers
b) xx. - only 2 digit numbers
c) ^ - exclude
d) [3-5] - any digit of 3, 4, or 5
e) [147] - any digit of 1, 4, or 7
f) <2=011> - replace digit 2 with 011 when dialing
g) | - the OR operand
• Example 1: {[369]11 | 1617xxxxxxx}
Allow 311, 611, and 911 or any 10 digit numbers with leading digits 1617
• Example 2: {^1900x+ | <=1617>xxxxxxx}
Block any number of leading digits 1900 or add prefix 1617 for any dialed 7 digit
numbers
• Example 3: {1xxx[2-9]xxxxxx | <2=011>x+}
Allows any number with leading digit 1 followed by a 3 digit number, followed by any
number between 2 and 9, followed by any 7 digit number OR Allows any length of
numbers with leading digit 2, replacing the 2 with 011 when dialed.
3. Default: Outgoing – {x+}
Allow any length of numbers.
Example of a simple dial plan used in a Home/Office in the US:
{ ^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }
Explanation of example rule (reading from left to right):
• ^1900x. - prevents dialing any number started with 1900
• <=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by dialing 7
numbers and 1617 area code will be added automatically
• 1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11 digits
length
• 011[2-9]x. - allows international calls starting with 011
• [3469]11 - allow dialing special and emergency numbers 311, 411, 611 and 911
Note: In some cases where the user wishes to dial strings such as *123 to activate
voice mail or other applications provided by their service provider, the * should be
predefined inside the dial plan feature. An example dial plan will be: { *x+ } which
allows the user to dial * followed by any length of numbers.
Delayed Call Forward
Wait Time
Time waited before the call is forward to a number or VM. Default is 20 seconds.
Enable Call Features
Default is “Yes”. If set to “No”, Call transfer, Call Forwarding & Do-Not-Disturb are
supported locally provided ITSP support those features. In addition, “ForwardAll”
softkey will be hidden if call feature code is disabled for Account 1.
Call Log
User can choose to disable Call Log and what kind of calls to log.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 30 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Session Expiration
The SIP Session Timer extension enables SIP sessions to be periodically
“refreshed” via a SIP request (UPDATE, or re-INVITE. Once the session interval
expires, if there is no refresh via a UPDATE or re-INVITE message, the session is
terminated.
Session Expiration is the time (in seconds) at which the session is considered timed
out, provided no successful session refresh transaction occurs beforehand. The
default value is 180 seconds.
Min-SE
Defines the minimum session expiration (in seconds). Default is 90 seconds.
Caller Request Timer
If set to “Yes”, the phone will use session timer when it makes outbound calls if
remote party supports session timer.
Callee Request Timer
Force Timer
If selecting “Yes”, the phone will use session timer when it receives inbound calls
with session timer request.
If set to “Yes”, the phone will use session timer even if the remote party does not
support this feature. If set to “No”, the session timer is enabled only when the
remote party supports this feature. To turn off Session Timer, select “No” for Caller
Request Timer, Callee Request Timer, and Force Timer.
UAC Specify Refresher As a Caller, select UAC to use the phone as the refresher, or UAS to use the Callee
or proxy server as the refresher.
UAS Specify Refresher As a Callee, select UAC to use caller or proxy server as the refresher, or UAS to
use the phone as the refresher.
Force INVITE
Session Timer can be refreshed using INVITE method or UPDATE method. Select
“Yes” to use INVITE method to refresh the session timer.
Enable 100rel
PRACK (Provisional Acknowledgment) method enables reliability to SIP provisional
responses (1xx series). This is required to support PSTN inter-networking.
Account Ring Tone
There are 4 uniquely defined ring tones:
•
One (1) System Ring Tone: when selected, all calls will ring with system
ring tone.
•
Three (3) Customer Ring Tones: when selected, incoming calls from
designated account will play selected ring tone.
Ring Timeout
Defines how long ring will ring when receiving a call. Default is 60 seconds.
Line-seize Timeout
Defines how long before the line can be seized when Share Line is used. Default is
15 seconds.
Send Anonymous
If this parameter is set to “Yes”, the “From” header in outgoing INVITE message will
be set to anonymous, essentially blocking the Caller ID from displaying.
Anonymous Call
Rejection
Default is “No”. If set to “Yes”, anonymous call will be rejected.
Auto Answer
Default is “No”. If set to “Yes”, GXP1400/1405 will automatically switch on speaker
to answer the incoming call. Set to Intercom/Paging mode, it will answer the call
based on the SIP info header from the server.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 31 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Allow Auto Answer by
Call-Info
If the Call-Info header contains answer-after=0, the call be answered automatically
(so called paging mode).
Refer-To Use Target
Contact
Default is “No”. If set to “Yes”, then for Attended Transfer, the “Refer-To” header
uses the transferred target’s Contact header information.
Transfer on Conference Defines whether or not the call is transferred to the other party if the initiator of the
Hangup
conference hangs up.
Default setting is set to “No”.
Preferred Vocoder
GXP1400/1405 supports up to 7 different Vocoder types including G.711(a/µ) (also
known as PCMU/PCMA), G.723.1, G.729A/B, G.726-32, Ilbc, G.722 (wide-band).
Configure Vocoders in a preference list that is included with the same preference
order in SDP message. Enter the first Vocoder in this list by choosing the
appropriate option in “Choice 1”. Similarly, enter the last Vocoder in this list by
choosing the appropriate option in “Choice 8”.
SRTP Mode
Enable SRTP mode based on selection. Default is “No”.
Selects whether or not symmetric RTP is supported.
Symmetric RTP
Silence Suppression
This controls the silence suppression/VAD feature of the audio codec G.723 and
G.729. If set to “Yes”, when silence is detected, a small quantity of VAD packets
(instead of audio packets) will be sent during the period of no talking. If set to “No”,
this feature is disabled.
Voice Frames per TX
This field contains the number of voice frames to be transmitted in a single Ethernet
packet (be advised the IS limit is based on the maximum size of Ethernet packet is
1500 byte (or 120kbps)).
When setting this value, be aware of the requested packet time (ptime, used in SDP
message) is a result of configuring this parameter. This parameter is associated
with the first codec in the above codec Preference List or the actual used payload
type negotiated between the 2 conversation parties at run time. E.g., if the first
codec is configured as G.723 and the “Voice Frames per TX” is set to 2, then the
“ptime” value in the SDP message of an INVITE request will be 60ms because each
G.723 voice frame contains 30ms of audio. Similarly, if this field is set to 2 and the
first codec is G.729 or G.711 or G.726, then the “ptime” value in the SDP message
of an INVITE request will be 20ms.
If the configured voice frames per TX exceeds the maximum allowed value, the IP
phone will use and save the maximum allowed value for the corresponding first
codec choice. The maximum value for PCM is 10 (x10ms) frames; for G.726, it is 20
(x10ms) frames; for G.723, it is 32 (x30ms) frames; for G.729/G.728, 64 (x10ms)
and 64 (x2.5ms) frames respectively.
Please be careful when editing these parameters. Adjusting these parameters will
also change the dynamic jitter buffer. The GXP1400/1405 has a patent dynamic
jitter buffer handling algorithm. The jitter buffer range is 20 ~ 200 ms.
We recommend using the default settings provided. We do not recommend
adjusting these parameters if you are an average user. Incorrect settings will affect
the voice quality.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 32 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
No Key Entry Timeout
Use # as Dial Key
Default is 4 seconds.
This parameter allows users to configure the “#” key as the “Send” (or “Dial”) key. If
set to “Yes”, the “#” key will immediately send the call. In this case, this key is
essentially equivalent to the “(Re)Dial” key. If set to “No”, the “#” key is included as
part of the dial string.
G723 Rate
Encoding rate for G723 codec. By default, 6.3kbps rate is set.
G726-32 Packing Mode Select “ITU” or “IETF” for G726-32 packing mode.
ilbc Frame Size
ilbc Payload Type
Conference URI
Special Feature
ilbc packet frame size. Default is 20ms. For Asterisk PBX, 30ms might be required.
Payload type for Ilbc. Default value is 97. The valid range is between 96 and 127.
Configure the conference URI when using Broadsoft N-way calling feature.
Default is Standard. Choose the selection to meet special requirements from Soft
Switch vendors.
SAVING THE CONFIGURATION CHANGES
After the user makes a change to the configuration, press the “Update” button in the Configuration Menu.
The web browser will then display a message window to confirm saved changes.
We recommend rebooting or powering cycle the IP phone after saving changes.
REBOOTING THE PHONE REMOTELY
Press the “Reboot” button at the bottom of the configuration menu to reboot the phone remotely. The web
browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in
again.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 33 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Upgrade & Customization
Software (or firmware) upgrades are completed via either TFTP or HTTP. The corresponding configuration
settings are in the ADVANCED SETTINGS configuration page.
FIRMWARE UPGRADE THROUGH TFTP/HTTP
To upgrade via TFTP or HTTP, select TFTP or HTTP upgrade method. “Upgrade Server” needs to be set to
a valid URL of a HTTP server. Server name can be in either FQDN or IP address format. Here are examples
of some valid URLs.
•
•
firmware.mycompany.com:6688/Grandstream/1.2.3.5
72.172.83.110
There are two ways to set up the Upgrade Server to upgrade firmware: via Key Pad Menu and Web
Configuration Interface.
Key Pad Menu
To configure the Upgrade Server via Key Pad Menu options, select “Config” from the Main Menu, then select
“Upgrade”. Under this sub Menu, user can edit Upgrade Server in either an IP address format or FQDN
format. Choose “Save and use TFTP” or “Save and use HTTP” to select upgrade method. Select “Reboot”
from the Main Menu to reboot the phone.
Web Configuration Interface
To configure the Upgrade Server via the Web configuration interface, open the web browser. Enter the
GXP1400/1405 IP address. Enter the admin password to access the web configuration interface. In the
ADVANCED SETTINGS page, enter the Upgrade Server’s IP address or FQDN in the “Firmware Server
Path” field. Select TFTP or HTTP upgrade method. Update the change by clicking the “Update” button.
“Reboot” or power cycle the phone to update the new firmware.
During this stage, the LCD will display the firmware file downloading process. Please do NOT disrupt or
power down the unit. If a firmware upgrade fails for any reason (e.g., TFTP/HTTP server is not responding,
there are no code image files available for upgrade, or checksum test fails, etc), the phone will stop the
upgrading process and re-boot using the existing firmware/software.
Firmware upgrades take around 60 seconds in a controlled LAN or 5-10 minutes over the Internet. We
recommend completing firmware upgrades in a controlled LAN environment whenever possible.
No Local TFTP/HTTP Server
For users who do not have a local TFTP/HTTP server, we provide a HTTP server on the public Internet for
users to download the latest firmware upgrade automatically. Please check the Support/Download section of
Alternatively, download and install a free TFTP or HTTP server to the LAN to perform firmware upgrades. A
free Windows version TFTP server is available:
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 34 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCTIONS FOR LOCAL TFTP UPGRADE:
1. Unzip the file and put all of them under the root directory of the TFTP server.
2. The PC running the TFTP server and the GXP1400/1405 should be in the same LAN
segment.
3. Go to File -> Configure -> Security to change the TFTP server's default setting from
"Receive Only" to "Transmit Only" for the firmware upgrade.
4. Start the TFTP server, in the phone’s web configuration page
5. Configure the Firmware Server Path with the IP address of the PC
6. Update the change and reboot the unit
User can also choose to download the free HTTP server from http://httpd.apache.org/ or use Microsoft IIS
web server.
NOTE:
•
When GXP1400/1405 phone boots up, it will send TFTP or HTTP request to download configuration
file “cfg000b82xxxxxx”, where “000b82xxxxxx” is the MAC address of the GXP1400/1405 phone.
This file is for provisioning purpose. For normal TFTP or HTTP firmware upgrades, the following
error messages in a TFTP or HTTP server log can be ignored: “TFTP Error from [IP ADRESS]
requesting cfg000b82023dd4 : File does not exist. Configuration File Download”
CONFIGURATION FILE DOWNLOAD
The GXP1400/1405 can be configured via Web Interface as well as via Configuration File (binary or XML)
through TFTP or HTTP/HTTPS. The “Config Server Path” is the TFTP or HTTP server path for the
configuration file. It needs to be set to a valid URL, either in FQDN or IP address format. The “Config Server
Path” can be the same or different from the “Firmware Server Path”.
A configuration parameter is associated with each particular field in the web configuration page. A parameter
consists of a Capital letter P and 2 to 4 digit numeric numbers. i.e., P2 is associated with “Admin Password”
in the ADVANCED SETTINGS page. For a detailed parameter list, please refer to the corresponding
configuration template of the firmware.
Once the GXP1400/1405 boots up (or re-booted), it will request a configuration file named “cfgxxxxxxxxxxxx”
followed by a request for configuration XML file named “cfgxxxxxxxxxxxx.xml”, where “xxxxxxxxxxxx” is the
MAC address of the device, i.e., “cfg000b820102ab”. The configuration file name should be in lower cases.
Managing Firmware and Configuration File Download
When “Automatic Upgrade” is set to “Yes”, a Service Provider can use P193 (Auto Check Interval, in
minutes, default and minimum is 60 minutes) to have the devices periodically check for upgrades at pre-
scheduled time intervals. By defining different intervals in P193 for different devices, a Server Provider can
manage and reduce the Firmware or Provisioning Server load at any given time.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 35 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Restore Factory Default Setting
WARNING: Restoring the Factory Default Setting will delete all configuration information of the phone.
Please backup or print all the settings before you restoring factory default settings. We are not responsible
for restoring lost parameters and cannot connect your device to your VoIP service provider.
INSTRUCTIONS FOR RESTORATION:
Step 1: Press “OK” button to bring up the keypad configuration menu, select “Config”, press “OK” to
enter submenu, select “Factory Reset” (Please refer to Table 5-1 of keypad flow chart)
Step 2: Enter the MAC address printed on the bottom of the sticker. Please use the following mapping:
0-9: 0-9
A:
B:
22 (press the “2” key twice, “A” will show on the LCD)
222
C: 2222
D: 33 (press the “3” key twice, “D” will show on the LCD)
E: 333
F: 3333
Example: if the MAC address is 000b8200e395, it should be key in as “0002228200333395”.
NOTE:
•
If there are digits like “22” in the MAC, you need to type “2” then press “->” right arrow key to
move the cursor or wait for 4 seconds to continue to key in another “2”.
Step 3: Press the “OK” button to move the cursor to “OK”. Press “OK” button again to confirm. If the
MAC address is correct, the phone will reboot. Otherwise, it will exit to previous keypad menu interface.
Grandstream Networks, Inc.
GXP1400/1405 User Manual
Page 36 of 36
Firmware version: 1.0.1.83
Last Updated: 08/2011
Download from Www.Somanuals.com. All Manuals Search And Download.
|