Graco Pet Fence 240 350 User Manual

Parts  
INSTRUCTIONS–PARTS LIST  
308–845  
Contents  
Rev. C  
This manual contains important  
warnings and information.  
READ AND KEEP FOR REFERENCE.  
First choice when  
quality counts.t  
INSTRUCTIONS  
ACETAL HUSKYt 307, WALL-MOUNT PUMP, DRUM SUCTION  
PROt/ Delta Sprayt Packages  
Metal fluid fittings and hose couplings are stainless steel.  
This manual contains  
changes not included  
100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure  
100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure  
throughout the contents.  
Please see the second  
page of this book (page 1A)  
for a description of the  
revisions and additions.  
Packages with Fluid Pressure Regulators  
Model No. 240–349  
with hoses and Delta Spray air spray gun  
Model No. 240–350  
with hoses and Delta Spray HVLP gun  
Model No. 240–351  
no hoses or gun  
Model No. 240–352  
with hoses and PRO 3500sc electrostatic gun  
Model No. 240–353  
with hoses and PRO 4500sc electrostatic gun  
Packages with Surge Tanks  
Model No. 240–361  
with hoses and Delta Spray air spray gun  
Model No. 240–362  
with hoses and Delta Spray HVLP gun  
Model No. 240–363  
no hoses or gun  
8119A  
This gun and hose for PRO 3500sc  
Electrostatic package  
This gun and hose for Delta Spray Air Spray  
package or Delta Spray HVLP package  
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441  
Graco Inc. is registered to I.S. EN ISO 9001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
308845  
1B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Parts List and Parts Drawing  
Symbols  
Warning Symbol  
2
4
6
9
WARNING  
WARNING  
This symbol alerts you to the possibility of serious  
injury or death if you do not follow the instructions.  
240–349 to 240–353  
240–361 and 240–363  
Fluid Filter Kit 240–440 . . . . . . . . . . . . . . . . . . 14  
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Wall Mounting Hole Layout . . . . . . . . . . . . . . . 15  
Graco Standard Warranty . . . . . . . . . . . . . . . . . 16  
Graco Phone Number . . . . . . . . . . . . . . . . . . . . 16  
.
. . . . . . . . . . . . . . . . . 10  
.
. . . . . . . . . . . . . . . 12  
.
Caution Symbol  
.
.
CAUTION  
This symbol alerts you to the possibility of damage to  
or destruction of equipment if you do not follow the  
corresponding instructions.  
.
WARNING  
PRESSURIZED FLUID HAZARD  
Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin  
and cause serious injury  
.
D
D
Do not stop or deflect fluid leaks with your hand, glove, or rag.  
Follow the Pressure Relief Procedure on page 6 before cleaning, checking, or servicing the  
equipment.  
D Tighten all fluid connections before each use.  
D
Check the hoses, tubes, and couplings daily. Replace parts immediately if worn, damaged, or  
loose. Permanently coupled hoses cannot be repaired.  
FIRE AND EXPLOSION HAZARD  
Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and  
result in fire or explosion and serious injury  
.
D
D
D
Ground the equipment, personnel in or close to the spray area, the object being sprayed, and all  
other electrically conductive objects in the spray area. See Grounding on page 5.  
If there is any static sparking while using the equipment, stop spraying immediately. Identify and  
correct the problem.  
Provide fresh air ventilation to avoid the buildup of flammable vapors from the solvent or the fluid  
being sprayed.  
D
D
D
D
D
D
Do not smoke in the spray area.  
Extinguish all open flames or pilot lights in the spray area.  
Do not turn on or off any light switch in the spray area.  
Electrically disconnect all equipment in the spray area.  
Keep the spray area free of debris, including solvent, rags, and gasoline.  
Do not operate a gasoline engine in the spray area.  
2
308-845  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
EQUIPMENT MISUSE HAZARD  
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result  
INSTRUCTIONS  
in a serious injury  
.
D
D
D
This equipment is for professional use only.  
Read all the instruction manuals, tags, and labels before operating the equipment.  
Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco  
distributor.  
D
D
D
Do not alter or modify this equipment. Use only genuine Graco parts and accessories.  
Check the equipment daily. Repair or replace worn or damaged parts immediately  
.
Do not exceed the maximum working pressure of the lowest rated system component. This pack  
age has a 100 psi (0.7 MPa, 7 bar) maximum working pressure.  
-
D
D
Use fluids that are compatible with the equipment wetted parts. See the  
all the equipment manuals. Read the fluid manufacturer s warnings.  
Technical Data section of  
Route the hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not  
expose Graco hoses to temperatures above 180_F (82_C) or below –40_F (–40_C).  
Do not use the hoses to pull equipment.  
D
D
Do not move pressurized equipment.  
D Wear hearing protection when operating this equipment.  
D
Comply with all applicable local, state, and national fire, electrical, and other safety regulations.  
TOXIC FLUID HAZARD  
Hazardous fluids or toxic fumes can cause a serious injury or death if splashed in the eyes or on the  
skin, swallowed, or inhaled.  
D
D
Know the specific hazards of the fluid you are using. Read the fluid manufacturers warnings.  
Store hazardous fluid in an approved container. Dispose of the hazardous fluid according to all  
local, state, and national guidelines.  
D Wear appropriate protective clothing, gloves, eyewear, and respirator  
.
D
If the pump diaphragm fails, hazardous fluid may be exhausted along with the air.  
308-845  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Preparing the Operator  
CAUTION  
This equipment is compatible with most water-based  
materials. See the wetted parts in the Technical  
Data section and your fluid and solvent  
Anybody who operates this system should be trained  
in the safe, efficient operation of all system  
components. At a minimum, all operators should  
thoroughly read the safety, setup, and operation  
sections of this manual.  
manufacturer’s compatibility information.  
Do not use acid catalyzed materials; they are incom  
patible with the acetal used in this pump.  
-
Preparing the Site  
D Use a compressor capable of delivering 40 cfm  
3
(1.12 m ) and a minimum of 80 psi (552 kPa,  
5.4 bar) for efficient operation.  
WARNING  
T
OXIC FLUID HAZARD  
D
D
Clear obstacles and debris that could cause an  
unsafe operating environment.  
Hazardous fluid or toxic fumes can  
cause serious injury or death if splashed  
in the eyes or on the skin, inhaled, or  
Run a 1/2 in. I.D. air line from your compressed air  
supply to the pump location. Be sure the air is dry  
and filtered.  
swallowed.  
D Read TOXIC FLUID HAZARD on page 3.  
D
When the bleed-type master air valve (K) is closed  
and the pump air regulator is opened, it relieves all  
air pressure to the system components.  
D
Use fluids and solvents that are compatible with  
the equipment wetted parts. Refer to the Tech-  
nical Data section of all equipment manuals.  
Read the fluid and solvent manufacturer’s  
warnings.  
D Ventilate the spray booth.  
WARNING  
o prevent hazardous concentrations of toxic  
General Information  
T
D Always use Genuine Graco Parts and Accessories,  
available from your Graco distributor. See the  
Product Data Sheet for this package, Form No.  
305–898. If you supply your own accessories, be  
sure they are adequately sized and pressure rated  
for your system.  
and/or flammable vapors, spray only in a properly  
ventilated spray booth. Never operate the spray  
gun unless ventilation fans are operating.  
Check and follow all of the national, state, and local  
codes regarding air exhaust velocity requirements.  
D
Reference numbers and letters in parentheses refer  
to the callouts in the figures and the parts lists on  
pages 10 and 12.  
4
308-845  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Assembling the Wall-Mount Unit  
Grounding  
See Fig. 1  
Install the wall bracket (G) 5 ft (1.5 m) above the floor  
For proper hole dimensions, use the Wall Mounting  
Hole Layout on page 15. Be sure the wall is strong  
enough to support the weight of the pump and hoses,  
any accessories, the fluid, and stress caused by pump  
operation.  
.
WARNING  
T
o reduce the risk of static sparking, the entire  
system must be grounded. Check your local  
electrical code for detailed grounding instructions  
for your area and type of equipment. Ground all of  
this equipment. Also read FIRE AND EXPLOSION  
HAZARD on page 2.  
Screw the bung plug (R) into the drum bung opening.  
Adjust the suction tube (L) so the end of the tube is  
about 1/2 in. (13 mm) off the bottom of the drum, and  
secure the suction tube using the thumbscrew on the  
bung plug.  
D Pump: One end of the ground wire is already  
connected to the pump grounding strip. Connect  
the clamp end of the ground wire to a true earth  
ground.  
Hose Connections  
D
Air compressor: Follow the manufacturer’s  
recommendations.  
This package is shipped with the hoses connected.  
Before you disconnect any hoses, make a note of the  
proper connections.  
D
D
D
Object being sprayed: Follow the local code.  
Fluid supply container: Follow the local code.  
Flush Pump Before First Use  
All solvent pails used when flushing: Follow the  
local code. Use only metal pails, which are  
conductive. Do not place the pail on a  
non-conductive surface, such as paper or  
cardboard, which interrupts the grounding  
continuity.  
The pump was tested in water. If the test solution  
could contaminate the fluid you are pumping, flush the  
pump thoroughly with a compatible solvent. See  
Flushing the System on page 8.  
D
Systems with PRO 3500sc and PRO 4500sc  
electrostatic gun: Make sure you read all of the  
grounding instructions and warnings in your gun  
instruction manual.  
308-845  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
3. Slowly open the gun air regulator (F), and pull the  
Using the Gun  
gun trigger just enough to open only the air valve  
in the gun. With the gun air triggered, set the gun  
air pressure to 60 psi (413 kPa, 4 bar).  
See the gun instruction manual for gun operation,  
care, flushing, cleaning, and technical data. Read the  
entire gun manual before operating the sprayer  
.
NOTE: Gun air pressure higher than 60 psi (413  
kPa, 4 bar) will cause excessive overspray and  
lowered efficiency.  
Pressure Relief Procedure  
See Fig. 1  
4. If your system has a fluid pressure regulator (G),  
fully trigger the gun, and fine tune the fluid  
pressure to obtain the desired atomization.  
WARNING  
The system remains pressurized until pressure is  
manually relieved. To reduce the risk of serious  
injury from pressurized fluid, accidental spray from  
Systems with Fluid Pressure Regulator  
See Fig. 1  
the gun, or splashing of any fluid, follow this proce  
-
dure whenever you  
With the fluid pressure regulator (G), you can control  
fluid pressure from the pump to the gun. For an  
accurate setting, adjust the fluid regulator only when  
the gun is triggered and fluid is flowing through the  
regulator. Be sure the jam nut under the T–handle (G)  
does not interfere with your adjustments. Tighten the  
jam nut to lock in the setting, if desired.  
D
D
D
D
Stop spraying  
Are instructed to relieve pressure  
Check or service any system equipment  
Install, clean, or change spray nozzles  
1. Turn off the air supply to the pump.  
1. To open the fluid regulator, which allows fluid to  
flow, turn the T-hand clockwise.  
2. Be sure the pump air regulator is open by turning  
the knob (E) clockwise several turns.  
2. To close the fluid regulator, which restricts or shuts  
off the fluid flow, turn the T-handle  
counterclockwise.  
3. Open the bleed-type master air valve (K) to relieve  
pump air pressure.  
4. Trigger the gun (B) to relieve fluid pressure in the  
hoses.  
Systems with Surge Tank  
See Parts Drawing on page 13  
Adjusting Pump and Gun Air Regulators  
See Fig. 1  
In systems with a surge tank (30), the fluid pressure is  
the same as the air pressure applied to the pump  
(pump has 1:1 ratio of fluid to air). Adjust the fluid  
pressure as required with the pump air regulator (E).  
NOTE: The pump air regulator knob (E) and gun air  
regulator knob (F) have a locking feature. To unlock  
the knobs, pull out on them. You will feel them click  
out. To lock them at the desired setting, push them  
back into the locked position.  
The surge tank filter screen may require periodic  
cleaning. First, relieve the pressure. Unscrew the  
surge tank cover from its base, and remove the filter  
screen. Clean the screen with a compatible solvent,  
and reinstall it in the surge tank. Make sure you  
reinstall the cover with a firm hand torque to ensure a  
good seal.  
Always adjust the pump air regulator (E) and gun air  
regulator (F) slowly to prevent surging during startup.  
Turn the knobs clockwise to increase pressure, and  
counterclockwise to decrease air pressure.  
1. Slowly adjust the pump air regulator (E), to set air  
pressure to approximately 60 psi (413 kPa, 4 bar).  
WARNING  
T
o reduce the risk of serious injury whenever you  
2. If your system has a fluid pressure regulator, turn  
the fluid pressure regulator handle (G) to adjust  
the fluid pressure to 40 to 60 psi ( 276 to 413 kPa,  
2.8 to 4 bar).  
are instructed to relieve pressure, always follow the  
Pressure Relief Procedure on page 6.  
NOTE: The pump requires approximately 15 to 20 psi  
(103 to 138 kPa, 1 to 1.4 bar)to function. This is the  
lowest fluid pressure available. If lower fluid flow is  
required, a smaller fluid tip may be required on the  
spray device.  
6
308-845  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Priming the System See Fig. 1  
1. Close the gun air regulator (F).  
5. Slowly open the gun air regulator (F), and pull the  
gun trigger just enough to open only the air valve  
in the gun. With the gun air triggered, set the gun  
air pressure to 60 psi (413 kPa, 4 bar).  
2. If your system has a fluid pressure regulator (G),  
close it.  
6. Hold the gun against and aimed into a grounded  
metal waste pail, and fully trigger the gun. If your  
system has a fluid pressure regulator (G), slowly  
open it.  
3. Open the bleed-type master air valve (K).  
4. Slowly set the pump air regulator (E) pressure to  
20 to 30 psi (140 to 210 kPa, 1.4 to 2.1 bar). The  
pump cycles quickly, then it slows down when it is  
primed. Set the pump air pressure to 40 psi (280  
kPa, 2.8 bar).  
The gun emits air until the fluid arrives. When fluid  
flows freely, release the gun trigger  
.
KEY  
Delta Spray  
A
B
C
D
E
F
Husky 307 pump  
Gun  
Gun fluid hose  
Gun air hose  
Pump air regulator  
Gun air regulator  
regulated Air Spray package or  
regulated HVLP package shown  
G
H
K
L
Fluid pressure regulator  
Pump ground wire  
Bleed-type master air valve  
Suction tube  
B
M
N
P
Q
R
Front shield assembly  
Back shield  
P
Lifting handle  
G
Wall bracket  
Bung plug  
C
K
F
D
N
C
A
E
H
M
Q
R
L
8120A  
Fig. 1  
308-845  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
4. Make sure the air regulators (E and F) are closed.  
When to Shut Down the System  
NOTE: The gun air regulator (F) always stays  
closed during flushing.  
Shut down the system at the end of the work shift and  
before checking, adjusting, cleaning, or repairing the  
system. Always relieve the pressure  
.
5. Open the bleed-type master air valve (K).  
6. Slowly open the pump air regulator (E) until the  
pump starts.  
WARNING  
T
o reduce the risk of serious injury whenever you  
are instructed to relieve pressure, always follow the  
Pressure Relief Procedure on page 6.  
7. Hold the gun against a grounded metal waste pail,  
and fully trigger the gun. If your system has a fluid  
pressure regulator (G), slowly open it until the fluid  
flows smoothly  
.
Flushing the System  
8. When solvent appears, release the gun trigger  
.
Flush the system at the following times:  
9. For a first-time flush: trigger the gun and flush with  
solvent for 30 seconds.  
D
D
D
Before the first-time use  
When changing colors  
For flushing after spraying fluid: trigger the gun  
and flush with solvent until the system is  
thoroughly cleaned.  
Before fluid can dry or settle out in a dormant  
system.  
10. Repeat the procedure with clean solvent, if needed.  
D
Before storing the system  
11. Lift the fluid intake tube from the fluid supply, and  
trigger the gun and run the pump until air comes  
from the gun.  
Flush the system as follows (See Fig. 1):  
1. Relieve the pressure.  
12. Relieve the pressure  
.
The system is now ready to be stored or primed with  
another fluid. See Priming the System on page 7.  
WARNING  
To reduce the risk of serious injury whenever you  
are instructed to relieve pressure, always follow the  
Pressure Relief Procedure on page 6.  
2. Remove the gun air cap before flushing, and clean  
it separately  
.
3. Place the suction tube into a grounded metal pail  
of compatible solvent.  
8
308-845  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
See the separate component instruction manuals for individual component maintenance procedures.  
Access to some system components requires that you remove the shields. The following steps are for shield  
removal. Shield replacement is the reverse of these steps, so make sure you take notes on the proper hose  
connections. Depending on your system, see the Parts Drawings on pages 11 and 13 for number call-outs.  
Front Shield Assembly (1)  
Back Shield (25)  
1. Disconnect the pump air hose from the pump air  
regulator.  
1. Disconnect the gun fluid hose from the fluid  
pressure regulator nipple (28) or surge tank  
nipple (7).  
2. Disconnect the gun air hose from the gun air  
regulator.  
2. Disconnect the hose (16) that runs from the fluid  
pressure regulator or surge tank (50) to the elbow  
(40) on the pump outlet.  
3. Loosen, but do not remove, the two front pump  
foot screws (24).  
3. Loosen, but do not remove, the two top shield  
screws (32).  
4. Loosen, but do not remove, the two top shield  
screws (32).  
4. Loosen, but do not remove, the two back pump  
foot screws (24).  
5. If your system has a fluid pressure regulator (50),  
make sure the T–handle is horizontal.  
5. Pull the back shield free of the system. The fluid  
pressure regulator or surge tank (50) stays  
mounted to the back shield.  
6. Pull the front shield assembly free of the system.  
1g  
1c  
1a  
Gauge Lense Covers  
Clear, stick-on/peel-off lense covers are available for  
the gauges. These covers protect the gauge lenses  
from spray. When they get too dirty to read the  
gauges, they can be peeled off, discarded, and  
replaced. Order as follows:  
1f  
1e  
240–441 for 2.5-inch gauges; package of 25  
1d  
sheets, 12 lense covers to a sheet  
1b  
gun air  
regulator  
1h  
240–442 for 2-inch gauges; package of 25  
pump air  
regulator  
sheets, 12 lense covers to a sheet  
Front Shield Assembly Orderable Parts  
Ref.  
No.  
Part No.  
Description  
Qty.  
1a  
1b  
192–995  
111–804  
SHIELD, front  
1
REGULATOR, air  
See instruction manual 308–167  
GAUGE, pressure  
VALVE, ball  
ADAPTER  
NIPPLE  
2
2
1
2
1
1
1
1c  
1d  
1e  
1f  
1g  
1h  
160–430  
114–362  
159–840  
188–077  
114–369  
114–370  
FITTING, tube  
FITTING, tube  
8263A  
Fig. 2  
308-845  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts List  
Wall-Mount Packages with Fluid Pressure Regulators  
Model No. 240–349, Delta Spray air spray package  
Model No. 240–350, Delta Spray HVLP package  
Model No. 240–351, no hoses (31) or gun (30)  
Model No. 240–352, PRO 3500sc electrostatic package  
Model No. 240–353, PRO 4500sc electrostatic package  
Ref.  
No.  
Ref.  
No.  
Part No. Description  
Qty.  
Part No. Description  
Qty.  
1
240–210 SHIELD ASSY, front  
30  
239–542 GUN, Delta Spray, air spray  
Model 240–349  
Contains 1a to 1h, shown in Fig. 2 on  
page 9  
1
2
2
4
4
1
See instruction manual 308–742  
239–561 GUN, Delta Spray, HVLP  
Model 240–350  
See instruction manual 308–741  
222–300 GUN, PRO 3500sc, electrostatic  
Model 240–352  
See instruction manual 307–912  
224–200 GUN, PRO 4500sc, electrostatic  
Model 240–353  
1
1
1
2
3
5
6
7
8
110–789 WASHER, flat  
100–014 SCREW  
104–123  
WASHER, spring lock  
102–025 NUT, hex  
192–994 HANDLE, shield  
D31–331 PUMP, Husky 307  
See instruction manual 308–553  
054–139 TUBE, flexible  
1
9
75 in.  
10  
11  
12  
13  
15  
16  
17  
19  
20  
21  
24  
25  
26  
27  
28  
111–864 CONNECTOR, male  
188–181 PLUG, bung, airtight  
111–276 SCREW, thumb  
111–863 CONNECTION, union  
054–175 HOSE; Nylon  
1
1
1
See instruction manual 308–131  
240–421 HOSE ASSY, air spray/HVLP;  
25 ft (7.6 m) Delta packages  
240–425 HOSE ASSY, PRO gun;  
25 ft (7.6 m) PRO packages  
100–333 SCREW, cap, hex head  
114–369 FITTING, tube, quick-connect  
193–251 LABEL, product  
Delta packages  
193–252 LABEL, product  
PRO packages  
238–909 GROUND WIRE & CLAMP ASSY  
188–171 TUBE, suction  
1
1
31  
1
10 in.  
1
2
1
054–188 TUBE, PTFE  
188–285 BRACKET, wall  
R
9 in.  
32  
33  
34  
1
1
1
1
4
1
1
112–899  
WASHER, lock  
112–903 NUT, hex  
1
1
1
1
1
1
114–370 FITTING, tube, quick-connect  
104–119 SCREW, cap, hex head  
192–996 SHIELD, back  
104–029 LUG, grounding  
054–139 TUBE; Nylon  
37  
38  
39  
40  
50  
1
1.5 in.  
113–521 ELBOW, street  
114–456 ELBOW, street  
236–449 REGULATOR, fluid pressure;  
0–30 psi (0–207 kPa, 0–2 bar)  
Model 240–350  
189–436 NIPPLE  
1
1
29Y 189–220 LABEL, warning  
See instruction manual 308–325  
236–450 REGULATOR, fluid pressure;  
0–100 psi (0–0.6 MPa, 0–7 bar)  
All Models except 240–350  
1
1
See instruction manual 308–325  
Y Extra  
Warning labels are available for free.  
10  
308-845  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts Drawing  
Grounding Detail  
Wall-Mount Packages with Fluid Pressure Regulators  
Model No. 240–349, Delta Spray air spray package  
Model No. 240–350, Delta Spray HVLP package  
26  
37  
Model No. 240–351, no hoses (31) or gun (30)  
Model No. 240–352, PRO 3500sc electrostatic package  
Model No. 240–353, PRO 4500sc electrostatic package  
19  
20  
32  
39  
3
50  
16  
28  
2
27  
29  
8
7
25  
24  
1
21  
16  
40  
34  
15  
27  
15  
10  
9
33  
13  
9
17  
24  
5
6
11  
12  
30  
222–300  
shown  
30  
38  
31  
31  
8088A  
308-845  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts List  
Wall-Mount Packages with Surge Tanks  
Model No. 240–361, Delta Spray air spray package  
Model No. 240–362, Delta Spray HVLP package  
Model No. 240–363, no hoses (31) or gun (30)  
Ref.  
No.  
Ref.  
No.  
Part No. Description  
Qty.  
Part No. Description  
Qty.  
1
240–210 SHIELD ASSY, front  
25  
26  
27  
192–996 SHIELD, back  
104–029 LUG, grounding  
054–139 TUBE; Nylon  
1
1
Contains 1a to 1h, shown in Fig. 2 on  
page 9  
106–285 BOLT, U”  
1
2
4
4
1
1
1.5 in.  
3
5
6
7
8
29Y 189–220 LABEL, warning  
1
104–123  
WASHER, spring lock  
30  
239–542 GUN, Delta Spray, air spray  
Model 240–361  
See instruction manual 308–742  
239–561 GUN, Delta Spray, HVLP  
Model 240–362  
See instruction manual 308–741  
240–421 HOSE ASSY, air spray/HVLP;  
25 ft (7.6 m)  
100–333 SCREW, cap, hex head  
114–369 FITTING, tube, quick-connect  
193–253 LABEL, product  
102–025 NUT, hex  
188–089 NIPPLE  
D31–331 PUMP, Husky 307  
See instruction manual 308–553  
054–139 TUBE, flexible  
111–864 CONNECTOR, male  
188–181 PLUG, bung, airtight  
111–276 SCREW, thumb  
111–863 CONNECTION, union  
054–175 HOSE; Nylon  
1
1
1
9
75 in.  
10  
11  
12  
13  
15  
16  
17  
19  
20  
21  
24  
1
1
1
31  
1
2
1
1
1
1
2
1
32  
33  
34  
1
10 in.  
054–188 TUBE, PTFE  
188–285 BRACKET, wall  
R
9 in. 37  
238–909 GROUND WIRE & CLAMP ASSY  
188–171 TUBE, suction  
114–456 ELBOW, street  
1
1
1
1
4
38  
40  
50  
112–899  
WASHER, lock  
112–903 NUT, hex  
114–370 FITTING, tube, quick-connect  
104–119 SCREW, cap, hex head  
111–911 STRAINER, line  
*
These parts cannot be ordered separately  
.
Y
Extra Warning labels are available for free.  
12  
308-845  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts Drawing  
Grounding Detail  
Wall-Mount Packages with Surge Tanks  
Model No. 240–361, Delta Spray air spray package  
Model No. 240–362, Delta Spray HVLP package  
Model No. 240–363, no hoses (31) or gun (30)  
26  
37  
19  
20  
3
50  
7
32  
16  
40  
27  
8
29  
16  
25  
24  
1
21  
34  
15  
40  
10  
27  
15  
33  
9
13  
9
17  
24  
5
6
11  
12  
30  
38  
31  
8089A  
308-845  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.