®
GPSMAP 62 series
owner’s manual
For use with the GPSMAP 62,
62s and, 62st
Download from Www.Somanuals.com. All Manuals Search And Download.
Restoring Default Page
Table of Contents
Settings..................................11
Map...........................................11
Compass ................................. 13
Using the Compass................. 14
Using Sight ‘N Go.................... 14
Elevation Plot........................... 15
Opening the Main Menu.......... 16
Trip Computer.......................... 17
Getting Started.................... 1
Manual Conventions.................. 1
Device Overview........................ 2
Battery Information.................... 2
Installing the Batteries............... 3
Turning the Device On or Off..... 3
Acquiring Satellite Signals......... 3
Buttons ...................................... 4
Main Menu Features and
Navigating with Waypoints
and Routes.......................... 5
Waypoints.................................. 5
Routes....................................... 6
Additional Maps......................... 8
Settings ............................. 18
Geocaches .............................. 18
Share Wirelessly...................... 18
Proximity Alarms...................... 19
Profile Change......................... 19
Area Calculation...................... 19
Satellite.................................... 20
Additional Main Menu Tools..... 20
Tracks.................................. 9
About Tracks.............................. 9
Navigating a Saved Track........ 10
Customizing Your Device 22
Customizing Data Fields.......... 22
Data Field Options................... 22
System Settings....................... 26
Using the Main Pages .......11
Customizing the Data Fields.....11
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Settings....................... 27
Setting Up Tones ..................... 27
Marine Settings........................ 27
Setting up Marine Alarms ........ 28
Resetting Data......................... 29
Changing the Page
Support ................................. 34
Using the Backlight.................. 35
Specifications .......................... 35
Maximizing Battery Life ........... 36
About the Batteries.................. 37
Buying Optional Accessories... 38
Using Optional Fitness
Accessories........................... 38
Data Management................... 39
Attaching the Wrist Strap......... 42
Attaching the Carabiner Clip.... 43
Caring for the Device............... 43
Troubleshooting....................... 44
Sequence.............................. 29
Customizing the Unit
Settings................................. 30
Time Settings........................... 30
Position Format Settings ......... 30
Altimeter Settings .................... 31
Geocache Settings.................. 32
Routing Settings...................... 32
Fitness..................................... 33
Profiles..................................... 33
Index.................................. 46
Appendix ........................... 34
Registering Your Device.......... 34
Updating the Software............. 34
Viewing Important Device
Information............................ 34
Contacting Garmin Product
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Manual Conventions
When you are instructed to press
Getting Started
something, use the buttons on the unit.
Use the Rocker to select something in
WARNING
See the Important Safety and Product
Information guide in the product
box for product warnings and other
important information.
The small arrows (>) used in the text
indicate that you should select a series
of items in order, for example, “Select
Delete > Yes.”
When using your device the first time,
you should complete the following
tasks to set up the device and get to
know the basic features.
GPSMAP 62 Series Owner’s Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Device Overview
1
2
3
Internal antenna
Display
1
4
5
mini-USB port
(under weather cap)
5
6
MCX connector for GPS
6
7
8
2
antenna (under weather cap).
Available only on the GPSMAP
62s and the GPSMAP 62st.
4
7
8
microSD™ card slot (under
batteries). Available only on the
GPSMAP 62s and the GPSMAP
62st.
3
Battery compartment
Battery Information
The device operates on two AA
batteries. Use alkaline, NiMH, or
lithium batteries. Use precharged
2
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
NiMH or lithium batteries for best
Turning the Device On or
Off
Press and hold
.
Installing the Batteries
1. Remove the battery cover by
turning the D-ring 1/4 turn counter-
clockwise and pulling up.
Setting Your Language
1. Turn on the unit.
2. Use the Rocker to select a
language.
2. Insert the batteries, observing
polarity.
Acquiring Satellite
Signals
It may take 30 to 60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. If necessary, turn on the device.
3. Wait while the device searches for
satellites.
3. Replace the battery cover.
A question mark flashes while the
device determines your location.
For best results, after you install new
batteries, update the battery type in the
4. Quickly press
to open the
backlight status page.
The GPS bars indicate satellite
GPSMAP 62 Series Owner’s Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
strength. When the bars are green, the
device has acquired satellite signals.
MENU
Press MENU to open
the options menu for the
page that is currently
open.
Press MENU twice to
open the main menu
(from any page).
Buttons
PAGE
Press PAGE to scroll
through the main pages
Rocker
Press up, down, right,
and left to select menu
options and to move the
map cursor.
FIND
Press FIND to open the
search menu.
IN
Press IN to zoom in on
the map.
MARK
Press MARK to save
your current location as a
waypoint.
OUT
Press OUT to zoom out
on the map.
QUIT
Press QUIT to cancel
or return to the previous
menu or page.
ENTER
Press ENTER to select
options and acknowledge
messages.
4
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating with Waypoints and Routes
Editing a Waypoint
Before you can edit a waypoint, you
must create a waypoint.
Navigating with
Waypoints and Routes
1. From the main menu, select
Waypoints
Waypoints are locations you record and
store in the device.
Waypoint Manager.
2. Select a waypoint.
3. Select an attribute (such as the
name or location).
Creating Waypoints
1. From any page, press MARK.
4. Enter the new information.
2. Select Done.
5. Select Done.
Navigating to a Waypoint Using
the Search Menu
You can use the search menu to quickly
find waypoints, tracks, routes, and
coordinates that you have saved.
Deleting a Waypoint
1. From the main menu, select
Waypoint Manager.
2. Select a waypoint.
3. Press MENu.
4. Select Delete.
1. From any page, press FIND.
2. Select Waypoints.
3. Select a waypoint.
4. Select Go.
GPSMAP 62 Series Owner’s Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating with Waypoints and Routes
Editing the Name of a Route
1. From the main menu, select Route
Planner.
Routes
A route is a sequence of waypoints that
leads you to your final destination.
2. Select a route.
Creating a Route
3. Select Change Name.
4. Enter the new name.
5. Select Done.
1. From the main menu, select Route
Planner > Create Route > Select
First Point.
2. Select a category.
Editing a Route
1. From the main menu, select Route
Planner.
3. Select the first point in the route.
4. Select use.
2. Select a route.
5. Select Select Next Point.
3. Select Edit Route.
4. Select a point.
6. Repeat steps 2–5 until the route is
complete.
5. Select an option:
A route must contain at least two
points.
•
Review—shows the point on
the map.
7. Press quIT to save the route.
•
Move Down (or up)—changes
the order of the point on the
route.
6
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating with Waypoints and Routes
•
•
Insert—adds an additional
point on the route.
3. Select a route.
4. Select Go.
The additional point is inserted
before the point you are editing.
Viewing the Active Route
1. From the main menu, select Active
Route.
Remove—removes the point
from the route.
2. Select a point in the route to view
additional details.
Viewing a Route on the Map
1. From the main menu, select Route
Planner.
Stopping Navigation of a Route
1. From any page, press FIND.
2. Select a route.
2. Select Stop Navigation.
3. Select View Map.
Navigating a Reverse Route
1. From the main menu, select Route
Planner.
Deleting a Route
1. From the main menu, select Route
Planner.
2. Select a route.
2. Select a route.
3. Select Reverse Route.
4. Select the route again.
5. Select View Map > Go.
3. Select Delete Route.
Navigating a Route
1. Press FIND.
2. Select Routes.
GPSMAP 62 Series Owner’s Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating with Waypoints and Routes
6. Enter the house number.
7. Enter the street.
8. Select Go.
Additional Maps
To purchase preloaded detailed map
data cards, go to http://buy.garmin.com
or contact your Garmin dealer.
Finding an Address with City
Navigator®
You can use optional City Navigator
maps to search for addresses, cities,
and other locations. The detailed maps
contain millions of points of interest,
such as restaurants, hotels, and auto
services.
1. Press FIND.
2. Select Addresses.
3. Enter the country.
4. Enter the city or postal code.
NOTE: Not all map data provides
postal code searching.
5. Select the city.
8
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Tracks
4. Select an option:
Tracks
•
•
•
Distance—records tracks at a
specified distance.
About Tracks
Your Garmin device records a track log
while you are moving. You can save
these tracks and navigate to them later.
Time–records tracks at a
specified time.
Auto—records tracks at a
variable rate to create an
optimum representation of your
tracks.
You can view archived or loaded tracks
by selecting Track Manager from the
main menu.
5. Select Recording Interval.
Managing Track Log Recording
1. From the main menu, select Setup
> Tracks > Track Log.
6. Select an option to record tracks
more or less often.
NOTE: Using the Most Often
interval provides the most track
detail and fills up the device
memory quicker.
2. Select Record, Do Not Show or
Record, Show On Map.
If you select Record, Show On
Map, a line on the map indicates
your track.
3. Select Record Method.
GPSMAP 62 Series Owner’s Manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Tracks
Viewing the Current Track
The track being recorded is called the
current track.
Clearing the Current Track
From the main menu, select Setup
> Reset > Clear Current Track >
Yes.
1. From the main menu, select Track
Manager > Current Track.
Deleting a Track
1. From the main menu, select Track
Manager.
2. Select an option:
•
View Map—shows the current
track on the map.
2. Select a track.
3. Select Delete > Yes.
•
Elevation Plot—shows the
current track.
Navigating a Saved Track
You must record and save a track
before you can navigate using it.
Saving the Current Track
1. From the main menu, select Track
Manager > Current Track.
1. Press FIND.
2. Select Tracks.
3. Select a saved track.
4. Select Go.
2. Select what you want to save:
•
Save Track—saves the entire
active track.
•
Save Portion—allows you to
select a portion of the current
track to save.
10
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Main Pages
Map
Using the Main Pages
The position icon represents your
location on the map. As you travel,
the position icon moves and leaves a
track log (trail). Waypoint names and
symbols also appear on the map.
The information needed to operate this
device is found on the following pages:
map, compass, main menu, and trip
computer.
Customizing the Data
Fields
You can customize the data fields that
appear on the main pages. For data
Changing the Map Orientation
1. From the map, press MENu.
2. Select Setup Map > Orientation.
3. Select an orientation:
•
Select North up to show north
at the top of the page.
1. From a main page, press MENu.
2. Select Change Data Fields.
3. Select a data field.
•
Select Track up to show your
current direction of travel at the
top of the page.
4. Follow the on-screen instructions.
•
Select Automotive Mode to
show a perspective view.
Restoring Default Page
Settings
1. From a main page, press MENu.
2. Select Restore Defaults.
3. Press ENTER.
GPSMAP 62 Series Owner’s Manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Main Pages
•
•
Guidance Text—allows you to
select when to show guidance text
on the map.
Measuring Distance
You can move the cursor around the
map to measure distance from the
current location.
Advanced Map Setup
◦
Auto Zoom—automatically
selects the appropriate zoom
level for optimal use on your
map. When Off is selected, you
must zoom in or out manually.
1. From the map, press MENu.
2. Select Measure Distance.
The device automatically begins
measuring from your current
location.
◦
Zoom Levels—map items
draw or appear at or below the
selected zoom level.
3. Move the cursor to a point you
want to measure to.
The distance appears at the bottom
of the page.
◦
◦
Text Size—allows you to select
the text size for map items.
4. Press quIT to stop measuring.
Detail—allows you to select the
amount of map data displayed
on the device.
Map Setup Options
From the map, press MENu, and
select Setup Map.
NOTE: Higher detail settings
may cause the map to redraw
slowly.
•
Map Orientation—allows you to
select how the map is displayed
•
Shaded Relief—shows detail relief
on the map (if available) or turns
off shading.
12
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Main Pages
•
Map Information—allows you to
enable or disable the maps currently
loaded on the device. To purchase
Calibrating the Compass
notice
Calibrate the electronic compass
outdoors. Do not stand near objects that
influence magnetic fields, such as cars,
buildings, or overhead power lines.
Compass
When navigating to a destination,
the bearing pointer points to your
destination, regardless of the direction
you are moving. When the bearing
pointer points toward the top of the
electronic compass, you are traveling
directly toward your destination. If
it points any other direction, turn
toward that direction until the arrow is
pointing toward the top of the compass.
NOTE: The three-axis compass is
available only with the GPSMAP 62s
and GPSMAP 62st.
You should calibrate the compass after
moving long distances, experiencing
temperature changes, or changing the
batteries.
1. From the compass, press MENu.
2. Select Calibrate Compass > Start.
3. Follow the on-screen instructions.
GPSMAP 62 Series Owner’s Manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Main Pages
4. Use the compass to navigate to the
object.
Using the Compass
You can use the compass to navigate an
active route.
Compass Setup Options
From the compass, press MENu, and
select Setup Heading.
1. Press PAGE.
2. Hold the device level.
•
Display—shows the type of
directional heading on the compass:
3. Follow the bearing pointer to
your destination.
◦
◦
◦
Directional Letters—sets the
compass reading to directional
letters (N, S, E, W).
Using Sight ‘N Go
NOTE: Sight ‘N Go is available only
with the GPSMAP 62s and GPSMAP
62st.
Numeric Degrees—sets the
compass reading to degrees
(0°–359°).
You can point the device at an object in
the distance, such as a lighthouse, lock
in the direction, and then navigate to
the object.
Mils—sets the compass reading
to mils (0 mils–6399 mils).
•
North Reference—sets the north
reference of the compass:
1. From the main menu, select Sight
‘N Go.
◦
◦
True—sets true north as the
heading reference.
2. Point the device at an object.
Magnetic—automatically sets
the magnetic declination for
your location.
3. Select Lock Direction > Set
Course.
14
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Main Pages
◦
◦
Grid—sets grid north as the
heading reference (0°).
Elevation Plot
NOTE: The elevation plot page is
available only with the GPSMAP 62s
and GPSMAP 62st.
user—sets the magnetic
variation value.
•
Go To Line/Pointer—allows
you to select how the course is
displayed.
Calibrating the Barometric
Altimeter
You can manually calibrate the
barometric altimeter if you know
the correct elevation or the correct
pressure.
◦
Bearing (Small/Large) indicates
the direction to your destination.
◦
Course indicates your
relationship to a course line
leading to a destination.
1. From the elevation plot, press
MENu.
•
•
Compass—allows you to switch
from an electronic compass to
a GPS compass when you are
traveling at a higher rate of speed
for a set period of time, or turns the
compass off.
2. Select Calibrate Altimeter.
3. Follow the on-screen instructions.
Calibrate Compass—starts the
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Using the Main Pages
•
Reset—resets the elevation plot
data:
Elevation Plot Setup Options
From the elevation plot, press MENu.
◦
◦
◦
◦
Reset Trip Data—resets all
trip data.
•
Change Plot Type—sets the type
of data shown on the elevation plot:
Delete All Waypoints—deletes
all saved waypoints.
◦
◦
◦
◦
Elevation/Time—records
elevation changes over a period
of time.
Clear Current Track—deletes
the track log.
Elevation/Distance—records
elevation changes over a
distance.
Restore Defaults—restores the
device to factory settings.
Barometric Pressure—records
barometric pressure over a
period of time.
Opening the Main Menu
Ambient Pressure—records
ambient pressure changes over a
period of time.
The main menu gives you access to
setup screens including waypoints,
main menu settings pages.
•
Adjust Zoom Ranges—adjusts
the zoom ranges shown on the
elevation plot page.
From any page, press MENu
twice.
16
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Main Pages
•
Change Dashboard—changes the
theme and information displayed on
the dashboard.
Trip Computer
The trip computer displays your current
speed, average speed, maximum
speed, trip odometer, and other helpful
statistics.
NOTE: Your customized settings
are remembered by the dashboard,
and will not be lost when you
Trip Computer Setup Options
From the trip computer, press MENu.
•
Reset—resets all the trip
computer values to zero. For
accurate information, reset the trip
information before beginning a trip.
•
Big Numbers—changes the size
of the numbers shown on the trip
computer page.
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Main Menu Features and Settings
Navigating to a Geocache
1. From the main menu, select
Geocaches.
Main Menu Features
and Settings
2. Select Find a Geocache.
3. Select a geocache.
4. Select Go.
Geocaches
Geocaching is a type of treasure
hunting, in which geocachers seek
hidden treasures using GPS coordinates
posted on the Internet by those hiding
the geocache.
Share Wirelessly
NOTE: The share wirelessly feature is
available only with the GPSMAP 62s
and GPSMAP 62st.
Downloading Geocaches
Your device can send or receive data
when connected to another compatible
device. You must be within 10 feet
(3 m) of the compatible Garmin device.
2. Connect your device to your
Sending and Receiving Data
1. From the main menu, select Share
Wirelessly.
4. Download the Garmin
Communicator plug-in.
2. Select Send or Receive.
6. Follow the on-screen instructions
to download geocaches to your
device.
3. Follow the on-screen instructions.
18
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu Features and Settings
Setting a Profile
1. From the main menu, select Profile
Change.
Proximity Alarms
Proximity alarms alert you when you
are approaching a predetermined area.
Your current profile is indicated on
the page.
Setting a Proximity Alarm
1. From the main menu, select
Proximity Alarms.
2. Select a profile.
2. Select Create New.
3. Select a category.
4. Select a point.
5. Select use.
Area Calculation
Calculating the Size of an Area
1. From the main menu, select Area
Calculation > Start.
2. Walk around the perimeter of the
area you want to calculate.
6. Enter a radius.
7. Select Done.
3. Select Calculate when finished.
Profile Change
After you calculate the area, you can
save the track to your device and
change the unit of measure.
When you are using a profile and you
change settings such as data fields,
units of measurement, or position
settings, they are saved automatically
as part of the profile you are using.
For more information about
GPSMAP 62 Series Owner’s Manual
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu Features and Settings
•
•
Set Location On Map—allows
you to mark your current location
on the map. This option is available
only when you turn off GPS. You
can use this location to create routes
or search for saved locations.
AutoLocate® Position—calculates
your GPS position using the
Garmin AutoLocate feature.
Satellite
The satellite page shows your current
location, GPS accuracy, satellite
locations, and signal strength.
Satellite Settings
From the satellite page, press MENu.
•
use With GPS On—allows you to
turn the GPS on and off.
•
Track up—indicates whether
satellites are shown with rings
oriented with North toward the top
of the screen or oriented with your
current track toward the top of the
screen.
Additional Main Menu
Tools
•
•
•
Calendar—displays a calendar.
Calculator—displays a calculator.
Sun and Moon—displays sunrise
and sunset times along with the
moon phase.
•
Single Color—allows you to
select whether the satellite page is
displayed in multicolor or single
color.
20
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu Features and Settings
•
•
Alarm Clock—sets an audible
alarm. If you are not currently using
the device, you can set the device to
turn on at a specific time.
Hunt and Fish—displays the
predicted best dates and times for
hunting and fishing at your current
location.
•
•
Stopwatch—allows you to use a
timer, mark a lap, and time laps.
Waypoint Averaging—allows you
to refine a waypoint location with
multiple samples to achieve the
most-accurate location possible.
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Customizing Your Device
Data Field
Description
Customizing Your
Device
**Ambient
Pressure
The uncalibrated
environmental
pressure.
**Ascent -
Average
The average vertical
distance of ascent.
Customizing Data Fields
You can customize the data fields
displayed on each main page.
**Ascent -
Maximum
The maximum ascent
rate in feet/meters per
minute.
1. From a main page, press MENu.
2. Select Change Data Fields.
3. Select a data field.
**Ascent - Total
**Barometer
The total elevation
distance ascended.
The calibrated current
pressure.
4. Follow the on-screen instructions.
Battery Level
Bearing
The remaining battery
power.
Data Field Options
** Available only with the
GPSMAP 62s and GPSMAP 62st.
The direction from your
current location to a
destination.
**Cadence
(cadence
accessory
required)
Revolutions of the
crank arm or strides
per minute.
Data Field
Description
Accuracy of GPS The margin of error for
your exact location.
For example, your
Course
The direction from your
starting location to a
destination.
GPS location is
accurate to within
+/- 12 feet.
22
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
Data Field
Description
Data Field
Description
Depth
The depth of the water.
Requires a connection
to a NMEA 0183
ETA at Destination The estimated time of
day you will reach your
final destination.
depth-capable device
to acquire data
(page 26).
ETA at Next
The estimated time of
day you will reach the
next waypoint on the
route.
**Descent
- Average
The average vertical
distance of descent.
Glide Ratio
The ratio of horizontal
distance traveled to
the change in vertical
distance.
**Descent
- Maximum
The maximum descent
rate in feet/meter per
minute.
**Descent - Total The total elevation
distance descended.
Glide Ratio To
Dest.
The glide ratio required
to descend from
your current position
and elevation to the
destination elevation.
Distance to Dest. The distance to your
final destination.
Distance to Next
The remaining
GPS Signal
Strength
The strength of the
GPS signal.
distance to the next
waypoint on the route.
Heading
The direction you are
moving.
Elevation
The altitude of your
current location above
or below sea level.
**Heart Rate
Your heart rate in beats
(heart rate monitor per minute (bpm).
required)
**Elevation
- Maximum
The highest elevation
reached.
**Elevation
- Minimum
The lowest elevation
reached.
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Customizing Your Device
Data Field
Description
Data Field
Description
Location (lat/lon) Displays the current
position in the default
position format
Speed - Maximum The maximum speed
reached since last
reset.
regardless of the
selected settings.
Speed - Moving
Avg.
The average speed
of the device while
moving since last
reset.
Location
(selected)
Displays the current
position in the selected
position format.
Speed - Overall
Avg.
Your average speed
since last reset.
Odometer
Off Course
A running tally of
distance traveled for
all trips.
Sunrise
The time of sunrise
based on your GPS
position.
The distance to the left
or the right by which
you have strayed from
the original path of
travel.
Sunset
The time of sunset
based on your GPS
position.
Temperature
- Water
The temperature of
the water. Requires a
connection to a NMEA
0183 temperature-
capable device to
Pointer
Speed
The data field arrow
points in the direction
of the next waypoint
or turn.
The current rate of
speed at which you
are moving since last
reset.
acquire data (page 26).
Time of Day
The current time of
day based on your
time settings (format,
time zone, and daylight
saving time).
24
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
Data Field
Description
Data Field
Description
Time to
Destination
The estimated time
needed to reach your
final destination.
Turn
The angle of difference
(in degrees) between
the bearing to your
destination and your
current course. L
Time to Next
The estimated time
needed until you reach
the next waypoint on
the route.
means turn left. R
means turn right.
Velocity Made
Good
The speed at which
you are closing on a
destination along a
route.
To Course
The direction in which
you must move to
return to the route.
Trip Odometer
A running tally of the
distance traveled since
the last reset.
Vert. Speed to
Dest.
The measurement of
your rate of ascent
or descent to a
Trip Time - Moving A running tally of time
since the last reset.
predetermined altitude.
Vertical Speed
Your rate of altitude
gain or loss over time.
Trip Time
- Stopped
The time spent not
moving since the last
reset.
Waypoint at Dest. The last point on
a route to your
Trip Time - Total
A running tally of
distance traveled since
the last reset.
destination.
Waypoint at Next The next point on your
route.
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Customizing Your Device
•
Interface—sets the format of the
serial interface:
System Settings
From the main menu, select Setup >
System.
◦
◦
◦
◦
Garmin Serial—Garmin
proprietary format used to
provide PVT protocol data.
•
GPS—sets the GPS to Normal,
WAAS/EGNOS (Wide Area
Augmentation System/European
Geostationary Navigation Overlay
Service), or Demo Mode (GPS off).
For information about WAAS, go to
NMEA In/Out—provides
standard NMEA 0183 output
and input.
Text Out—provides simple
ASCII text output of location
and velocity information.
RTCM Radio Technical
Commission for Maritime
Services—allows the device
to accept DGPS Differential
Global Positioning System
information from a device
supplying RTCM data in an
SC-104 format.
•
Language—sets the text language
on the device.
NOTE: Changing the text language
does not change the language of
user-entered data or map data, such
as street names.
•
Battery Type—allows you to select
the type of battery you are using.
26
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
Display Settings
From the main menu, select Setup >
Display.
Marine Settings
From the main menu, select Setup >
Marine.
•
•
•
•
Marine Chart Mode—allows you
to select a nautical chart or a fishing
chart:
Colors—sets the colors used on the
device screens.
◦
Nautical (requires marine
maps)—displays various map
features in different colors so
that the marine POIs are more
readable. The nautical chart
reflects the drawing scheme of
paper charts.
•
Main, Setup, Find Style—allows
you to select how the main menu,
setup menu, and search menu
appear.
•
Screen Capture—allows you to
take screen captures on the device.
◦
Fishing (requires marine
maps)—displays a detailed
view of bottom contours and
depth soundings. Simplifies map
presentation for optimal use
while fishing.
Setting Up Tones
Your Garmin device allows you to
customize the key tones and message
beeps, or to turn off tones.
From the main menu, select Setup
> Tones.
GPSMAP 62 Series Owner’s Manual
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
•
Spot Soundings—allows you to
turn spot soundings on and set
dangerous depths.
Setting up Marine Alarms
Setting the Anchor Drag Alarm
You can set an alarm to sound when
you exceed a specified drift distance
while anchored.
•
Light Sectors—displays the sector
in which a navigational light is
visible. You can select On to show
light sectors at all times, or you can
select Auto to allow the device to
automatically filter out light sectors
depending on the zoom level.
1. From the main menu, select Setup
> Marine Settings.
2. Select Anchor Drag Alarm > On.
3. Enter a distance.
•
•
Symbol Set—allows you to show
NOAA or IALA symbols on the
map.
4. Select Done.
Setting the Off Course Alarm
You can set an alarm to sound when
you are off course by a specified
distance.
Marine Alarm Setup—sets the
anchor drag alarm, off course
alarm, deep water alarm, and
shallow water alarm.
1. From the main menu, select Setup
> Marine Settings.
2. Select Off Course Alarm > On.
3. Enter a distance.
4. Select Done.
28
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
1. From the main menu, select Setup
> Reset.
Setting the Deep Water or
Shallow Water Alarm
1. From the main menu, select Setup
> Marine > Marine Alarm Setup.
2. Select an item to reset.
Changing the Page
Sequence
2. Select Shallow Water > On to set
an alarm to sound when the depth is
less than the specified value.
3. Enter the depth that triggers the
shallow water alarm.
4. Select Done.
5. Select Deep Water > On to set an
alarm to sound when the depth is
greater than the specified value.
6. Enter the depth that triggers the
deep water alarm.
1. From the main menu, select Setup
> Page Sequence.
7. Select Done.
2. Select a page.
Resetting Data
You can reset trip data, delete all
waypoints, clear the current track, or
restore default values.
3. Select Move.
4. Move the page up or down the list.
5. Press ENTER.
GPSMAP 62 Series Owner’s Manual
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
4. Repeat steps 2–3 for each setting
you want to customize.
Adding a Page
1. From the main menu, select Setup
> Page Sequence.
Time Settings
2. Select Add Page.
From the main menu, select Setup >
Time.
3. Select a page to add.
Removing a Page
1. From the main menu, select Setup
> Page Sequence.
•
•
Time Format—allows you to
select a 12-hour or a 24-hour
display time.
2. Select a page.
3. Select Remove.
4. Press ENTER.
Time Zone—allows you to select
the time zone for the device. You
can select Automatic to set the
time zone automatically based on
your GPS position.
Customizing the Unit
Settings
You can customize units of measure for
distance and speed, elevation, depth,
temperature, and pressure.
Position Format Settings
NOTE: Do not change the position
format or the map datum coordinate
system unless you are using a map or
chart that specifies a different position
format.
1. From the main menu, select Setup
> units.
2. Select a setting.
From the main menu, select Setup >
Position Format.
3. Select a unit for the setting.
30
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
•
•
•
Position Format—sets the position
format in which a given location
reading appears.
◦
Fixed Elevation—the
barometer functions while you
are stationary.
Map Datum—sets the coordinate
system on which the map is
structured.
•
Pressure Trending
◦
Save When Power On—
records pressure data only when
the device is turned on. This
can be useful when you are
watching for pressure fronts.
Map Spheroid—shows the
coordinate system the device is
using. The default coordinate
system is WGS 84.
◦
Save Always—records pressure
data every 15 minutes, even
when the device is turned off.
Altimeter Settings
From the main menu, select Setup >
Altimeter.
•
Plot Type
◦
◦
◦
Elevation/Time—records
elevation changes over a period
of time.
•
•
Auto Calibration—the altimeter
self-calibrates each time you turn
the device on.
Elevation/Distance—records
elevation changes over a
distance.
Barometer Mode
◦
Variable Elevation—the
barometer functions while you
are moving.
Barometric Pressure—records
barometric pressure over a
period of time.
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Customizing Your Device
◦
Ambient Pressure—records
ambient pressure changes over a
period of time.
◦
◦
On Road For Time (requires
routable maps)—calculates on-
road routes that require minimal
time to drive.
Geocache Settings
From the main menu, select Setup >
Geocaches.
On Road For Distance
(requires routable maps)—
calculates on-road routes that
are shorter in distance.
•
•
Geocache List—allows you to
show the geocache list by names
or codes.
•
•
Calculates Routes for—allows you
to select a transportation method in
order to optimize your route.
Found Geocaches—allows you
to enter the number of geocaches
found.
Lock On Road—locks the current
location marker on the nearest road,
compensating for variances in map
position accuracy (requires routable
maps).
Routing Settings
From the main menu, select Setup >
Routing.
•
Off Road Transitions
◦
Auto—automatically routes you
to the next point.
•
Guidance Method—allows you
to select a guidance method for
calculating your route.
◦
Manual—allows you to select
the next point on the route by
using the point on the active
route page.
◦
Off Road—calculates point-to-
point routes.
32
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
◦
Distance—routes you to the
next point on the route when
you are within a specified
distance of your current point.
Saving a Custom Profile
You can customize your settings for
a particular activity or trip. After you
have made all the changes, you must
save them as a custom profile.
•
Avoidance Setup (requires routable
maps)—allows you to select the
road type you want to avoid.
1. From the main menu, select Setup
> Profiles.
2. Select Create New Profile > OK.
Fitness
Editing a Profile Name
1. From the main menu, select Setup
> Profiles.
For more information on optional
2. Select a profile.
3. Select Edit Name.
4. Enter the new name.
5. Select Done.
Profiles
Profiles are a collection of settings that
allow you to optimize your device from
one type of use to another, such as
moving from marine use to recreational
use.
Deleting a Profile
1. From the main menu, select Setup
> Profiles.
You can select Recreational, or save a
custom profile for your device.
2. Select a profile.
3. Select Delete.
GPSMAP 62 Series Owner’s Manual
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Viewing Important Device
Information
Appendix
You can view the unit ID, software
version, and license agreement.
Registering Your Device
Help us better support you by
completing our online registration
today.
From the main menu, select Setup
> About.
•
•
Contacting Garmin
Product Support
Keep the original sales receipt, or a
photocopy, in a safe place.
You can contact Garmin Product
Support if you have any questions
about this product.
Updating the Software
You must connect the device to your
computer to update the software
•
•
In the USA, go to www.garmin
.com/support, or contact Garmin
USA by phone at (913) 397.8200 or
(800) 800.1020.
In the UK, contact Garmin (Europe)
Ltd. by phone at 0808 2380000.
2. Follow the on-screen instructions.
NOTE: This does not erase any of your
data or settings.
34
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
•
In Europe, go to www.garmin.com
Support for in-country support
information, or contact Garmin
(Europe) Ltd. by phone at +44 (0)
870.8501241.
Display
(diagonal)
2.6 in. (66 mm)
Resolution
(W × H)
160 × 240 pixels,
backlit 65K color TFT
display
Water
resistance
Fully gasketed, high
impact plastic alloy,
waterproof to IEC
529-IPX-7
Using the Backlight
The backlight is activated any time you
press a button. Alerts and messages
also activate the backlight.
Data storage
•
1.7GB
(approximatley) for
the GPSMAP 62
and GPSMAP 62s
The GPSMAP 62s
and GPSMAP 62st
have a microSD
card slot for
NOTE: To change the backlight
•
Quickly press
backlight.
to turn on the
additional data
storage.
•
•
500MB
Specifications
(approximately) for
the GPSMAP 62st:
No memory battery
is required.
Physical size
(W × H × D)
2.6 × 6.0 × 1.2 in.
(6.6 × 15.2 × 3.0 cm)
Weight
7.8 oz. (222.3 g) with
batteries
Computer
interface
USB
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Appendix
Battery type
Two AA batteries
(alkaline, NiMH, or
lithium)
DGPS
From 10 to 16 ft. (from
3 to 5 m) 95% typical
(WAAS accuracy in
North America)
Altimeter
Accuracy: ± 10 ft.
(± 3 m)*
Battery life
Up to 20 hours, typical
usage
Resolution: 1 ft. (.3 m)
Range: from -2,000 ft.
to 30,000 ft.
(from -610 to 9144 m)
*Subject to proper user
calibration.
Operating
temperature
range
From 5°F to 158°F
(from -15 to 70°C)
See page 37.
Radio
frequency/
protocol
2.4 GHz/ANT+ wireless
communications
protocol
Compass
Accuracy: ± 2 degrees
(± 5 degrees in extreme
Northern and Southern
latitudes)*
Resolution: 1 degree.
*Subject to proper user
calibration.
GPS accuracy
•
•
< 33 ft. (10 m) 95%
typical use
GPS is subject
to accuracy
degradation to 100
m 2DRMS under
the U.S. DoD
imposed Selective
Availability (SA)
Program when
activated.
Maximizing Battery Life
Using the Battery Save Option
Use the battery save option to save
battery power and prolong battery life.
From the main menu, select Setup
> Display > Battery Save > On.
36
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
The temperature rating for the device
Decreasing the Backlight
Extensive use of screen backlighting
can significantly reduce battery life.
You can adjust the backlight brightness
and decrease the backlight timeout to
maximize battery power.
may exceed the usable range of some
batteries. Alkaline batteries can rupture
at high temperatures. Alkaline batteries
lose a significant amount of their
capacity as temperature decreases. Use
lithium batteries when operating the
device in below-freezing conditions.
1. Quickly press
to open the
backlight status page.
Selecting the Battery Type
1. From the main menu, select Setup
> System > Battery Type.
2. Use the Rocker to adjust the
brightness.
Adjusting the Backlight
Timeout
2. Select Alkaline, Lithium, or
Rechargeable NiMH.
From the main menu, select Setup
> Display > Backlight Timeout.
Long-Term Storage
When you do not plan to use the
device for several months, remove the
batteries. Stored data is not lost when
batteries are removed.
About the Batteries
WARNING
See the Important Safety and Product
Information guide in the product
box for product warnings and other
important information.
GPSMAP 62 Series Owner’s Manual
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
These accessories use ANT+™ wireless
technology to send data to the device.
Buying Optional
Accessories
or contact your Garmin dealer
for information about optional
accessories, preloaded map data
cards, fitness accessories, and
replacement parts.
1. Bring the device within range (3 m)
of the ANT+ accessory.
2. From the main menu, select Setup
> Fitness.
3. Select an option:
•
Select Heart Rate Monitor >
On.
Using Optional Fitness
Accessories
NOTE: The fitness option is available
only with the GPSMAP 62s and
GPSMAP 62st.
•
Select Bike Cadence Sensor
> On.
You can view heart rate and cadence
data by customizing your data fields
Before you can use the fitness
accessory with your device, you must
install the accessory according to the
instructions that are included with the
accessory.
You can use optional fitness accessories
including a heart rate monitor or a
cadence sensor with your device.
38
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
accessory, and you can go near
other accessories.
Tips for Pairing ANT+
Accessories with Your Garmin
Device
Data Management
•
Verify that the ANT+ accessory
is compatible with your Garmin
device.
NOTE: The device is not compatible
with Windows® 95, 98, Me, or NT. It is
also not compatible with Mac® OS 10.3
and earlier.
•
Before you pair the ANT+
accessory with your Garmin device,
move 10 m away from other ANT+
accessories.
File Types
The device supports the following file
types:
•
•
Bring the Garmin device within
range (3 m) of the ANT+ accessory.
•
Files from BaseCamp™ or
.com.
After you pair the first time, your
Garmin device automatically
recognizes the ANT+ accessory
each time it is activated. This
process occurs automatically when
you turn on the Garmin device and
only takes a few seconds when
the accessories are activated and
functioning correctly.
•
GPI custom POI files from the
Garmin POI Loader.
Installing a microSD Card
NOTE: The microSD card option is
available only with the GPSMAP 62s
and GPSMAP 62st.
•
When paired, your Garmin device
only receives data from your
You can purchase microSD memory
cards from an electronics supplier, or
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Appendix
purchase preloaded detailed map data
cards from your Garmin dealer. In
addition to map and data storage, the
memory cards can be used to store files
such as images, cartridges, geocaches,
routes, waypoints, and custom POIs.
microSD card
slot
1. Remove the battery cover by
turning the D-ring 1/4 turn counter-
clockwise and pulling up.
2. Slide up and pull out the metal
cover.
4. Push in and slide down the metal
cover.
3. Align the metal contacts, and place
the card in the slot.
5. Replace the batteries and the
battery cover.
Removing a microSD Card
1. Slide up and pull out the metal
cover.
2. Remove the card from the slot.
3. Push in and slide down the metal
cover.
40
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
4. Replace the batteries and the
battery cover.
Transferring Files to Your
Computer
After you have connected the device
to your computer, you can copy and
paste files from your computer into the
device drives/volumes.
Connecting the USB Cable
notice
To prevent corrosion, thoroughly
dry the mini-USB port, the weather
cap, and the surrounding area before
charging or connecting to a computer.
1. Browse your computer for the file.
2. Select the file.
3. Select Edit > Copy.
1. Connect the USB cable to a USB
port on your computer.
4. Open the “Garmin” or memory card
drive/volume.
2. Pull up the weather cap from the
mini-USB port.
5. Select Edit > Paste.
3. Plug the small end of the USB
cable into the mini-USB port.
Your device and microSD card
(optional) appear as removable
drives in My Computer on
Windows computers and as
mounted volumes on Mac
computers.
GPSMAP 62 Series Owner’s Manual
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Deleting Files
Disconnecting the USB Cable
1. Complete an action:
notice
•
For Windows computers, click
Your device memory contains
important system files and folders that
should not be deleted.
the eject icon
system tray.
in your
•
For Mac computers, drag the
volume icon to the Trash
Before you can delete files, you must
connect the device to your computer
.
2. Disconnect the device from your
computer.
1. Open the “Garmin” drive or
volume.
Attaching the Wrist Strap
1. Place the loop of the wrist strap
through the slot opening at the
bottom of the device.
2. If necessary, open a folder or
volume.
3. Select the files.
4. Press the Delete key on your
keyboard.
2. Route the strap through the loop,
and pull it tight.
42
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Attaching the Carabiner
Clip
Caring for the Device
notice
Avoid chemical cleaners and solvents
that can damage plastic components.
Cleaning the Device
1. Use a cloth dampened with a mild
detergent solution.
1. Position the carabiner clip in the
slots on the mounting spine.
2. Wipe it dry.
Cleaning the Screen
1. Use a soft, clean, lint-free cloth.
2. Slide the clip up until it locks in
place.
2. If necessary, use water, isopropyl
alcohol, or eyeglass lens cleaner.
Removing the Carabiner Clip
Lift the bottom of the clip and
gently push down on the carabiner
clip until it releases.
3. Apply the liquid to the cloth, and
gently wipe the screen with the
cloth.
GPSMAP 62 Series Owner’s Manual
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Problem
Solution
The screen or buttons do 1. Remove the batteries.
not respond. How do I
reset the device?
2. Reinstall the batteries.
NOTE: This does not erase any of your data or settings.
I want to reset all the
customized settings
back to the factory
defaults.
From the main menu, select Setup > Reset > Reset All
Settings.
My device does not
acquire satellite signals.
1. Take your device out of parking garages and away from tall
buildings and trees.
2. Turn on the device.
3. Remain stationary for several minutes.
long.
How do I know my
device is in USB mass
storage mode?
On the device, a screen appears showing the Garmin logo and
the USB symbol. On your computer, you should see a new
removable disk drive in My Computer on Windows computers
and a mounted volume on Mac computers.
My device is connected
to the computer, but it
will not go into mass
storage mode.
You may have loaded a corrupted file.
1. Disconnect the device from your computer.
2. Turn off the device.
3. Press and hold the Rocker while you connect the device to
your computer.
Continue pressing the Rocker for 10 seconds or until the
device goes into mass storage mode.
44
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Problem
Solution
I cannot see any new
removable drives in my
list of drives.
If you have several network drives mapped on your computer,
Windows may have trouble assigning drive letters to your
Garmin drives. See the Help file for your operating system to
learn how to assign drive letters.
or accessories.
GPS antenna.
GPSMAP 62 Series Owner’s Manual
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
about 37
information 2
installing 3
wirelessly 18
creating
Index
A
storage 37
routes 6
waypoints 5
customizing
accessories 38, 45
fitness 38
acquiring satellite
signals 44
warnings 37
profiles 33
beeps 27
buttons 4
alarms
C
D
marine 28
proximity 19
time 21
calculator 20
calendar 20
calibrating
altimeter 15
compass 15
compass
calibrating 13
navigating 13
connecting
dashboard
change 17
options 22
deleting
altimeter
calibrating 15
settings 31
files 42
profiles 33
routes 7
AutoLocate 20
tracks 10
waypoints 5
display
B
backlight 35, 37
BaseCamp 39
batteries 22, 26, 36
backlight 35
46
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
settings 27
downloading
software 34
settings 31
map datum coordinate
system 30
measuring
area 19
distance 12
moonphase 20
E
editing
profiles 33
H
HomePort 39
hunting and fishing
times 21
routes 6
waypoints 5
reset 16
L
N
language 3, 26
navigating
compass 13
routes 7
setup 15
M
main menu
tracks 10
settings 18
map 11
F
datum 31
detail 12
information 13
P
G
pages
removing 30
sequence 29
Garmin Product
Support 34
geocaches 18, 32
downloading 18
navigating 18
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Index
profiles 19
creating 6
deleting 7
T
time
change 19
editing 6
alarms 21
creating 33
setting 19
navigating 7
settings 32
settings 30
stopwatch 21
Q
S
AutoLocate 20
saving
zone 30
times
tones 27
tracks
about 9
R
recording
tracks 9
reset
tracks 10
deleting 10
navigating 10
recording 9
saving 10
viewing 9
data 29
software
updating 34
version 34
specifications 35
stopwatch 21
defaults 29
waypoints 29
restoring default
settings 11
Rocker 4
wirelessly 18
troubleshooting 44
routes
avoidance 33
48
GPSMAP 62 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
For the latest free software updates (excluding map data) throughout the life of
© 2010 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151st Street, Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
No. 68, Jangshu 2nd Road, Sijhih, Taipei County, Taiwan
October 2010
Part Number 190-01215-00 Rev. B
Printed in Taiwan
Download from Www.Somanuals.com. All Manuals Search And Download.
|