Turbine Kit Installation
3. Connect male tab end of second white wire (110)
Turbine Reassembly
to spade terminal 1 of switch (107), and connect
other end to spade terminal 6.
1. Install turbine by rotating into outlet fitting (18)
using o-ring packing (106) and positioning on
spacers (23) in turbine base plate.
4. Connect male tab end of black wire (111) to spade
terminal 2 on the red rocker switch (34). Connect
other end to open spade terminal on filter indicator
light (33).
2. Install 3 spacers (109). Reconnect ground wire
ring terminal to closest spacer (109). Check that
no wires are pinched by hardware.
Installation and Wiring of 2-Speed Turbine
3. Mount turbine plate (108) on spacers (109) with
screws (6).
1. Fig. 3. Replace turbine gaskets (41 and 42) with
gaskets (105 and 103) on turbine duct (5).
4. Install turbine gasket (104).
5. Reassemble turbine.
2. Place 2-speed turbine (102) alongside turbine
base plate (2), standing it on end (large-diameter
end up).
3. Connect black wire from turbine to spade terminal
wire connected to terminal 2 of red rocker
switch (34).
4. Connect white wire from turbine to spade terminal
5 of rocker switch (107).
5. Connect yellow wire from turbine to spade terminal
wire connected to terminal 1 of rocker
switch (107).
Motor
Y
BE
R
BK
W
6. Connect blue wire from turbine to spade terminal 4
of rocker switch (107).
G
7. Connect red wire from turbine to spade terminal
wire connected to terminal 2 of rocker
switch (107).
2-Speed Turbine
Wiring Diagram
7244B
Fig. 4
Kit Parts
Ref
Ref
No. Part No. Description
Qty
No. Part No. Description
Qty
102 114650 TURBINE, 4-stage, 2-speed; 120V
103 192846 GASKET, duct
104 192788 GASKET, turbine
105 192845 GASKET, duct
1
1
1
1
1
107 114658 SWITCH, rocker
108 194094 PLATE, turbine
109 194097 SPACER, turbine
110 240927 CONDUCTOR, electrical, white
111 240257 CONDUCTOR, electrical, black
1
1
3
2
1
106 156698 PACKING, o-ring
All written and visual data contained in this document reflect the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Sales Offices: Minneapolis, Detroit
Foreign Offices: Belgium, Korea, Hong Kong, Japan
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
PRINTED IN USA 308924 01/1999, Revised 02/2000
308924
4
Download from Www.Somanuals.com. All Manuals Search And Download.
