| 	
		 Car Seat/Booster Seat   
					Owner’s Manual   
					Model 8487, 8489   
					READ THIS MANUAL.   
					Do not install or use this car seat until you read and   
					understand the instructions in this manual.   
					FAILURE TO PROPERLY USE THIS   
					CAR SEAT INCREASES THE RISK OF   
					SERIOUS INJURY OR DEATH IN A   
					SUDDEN STOP OR CRASH.   
					© 2002 Graco 4005-5-02   
					40050502   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					1.0 Warnings to Parents   
					and Other Users   
					Failure to properly use this car seat increases the risk of   
					serious injury or death in a sharp turn, sudden stop or   
					crash. Your child’s safety depends on you installing and   
					using this car seat correctly.   
					Even if using this car seat seems easy to figure out on   
					your own, it is very important to READ THE OWNER’S   
					MANUAL and the vehicle owner’s manual.   
					Your child’s safety depends on:   
					1. Choosing the correct mode of use for the car   
					seat depending on your child’s size.   
					2. Inserting the harness straps (if needed) in the   
					proper slots for your child.   
					3. Selecting a suitable location for the car seat in   
					your vehicle.   
					4. Properly routing the vehicle seat belt or properly   
					using LATCH.   
					5. Properly securing the car seat in the vehicle   
					using a seat belt designed to restrain both the car   
					seat and your child or by using LATCH. Many seat   
					belts are NOT safe to use with this car seat, even   
					though they can easily be threaded through or   
					around the car seat!   
					6. Properly securing your child in the car seat.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					3 
				2.0 Registration Information   
					Model Number:   
					Manufactured in:   
					Purchase Date:   
					2.1 Register Your Car Seat   
					Please fill in the above information. The model number   
					can be found on a label underneath your car seat. Fill   
					out the prepaid registration postcard attached to the   
					seat cover and mail it today.   
					Child restraints could be recalled for safety reasons.   
					You must register this restraint to be reached in a recall.   
					Send your name, address and model number to:   
					Graco Children’s Products Inc.   
					P.O. Box 100   
					Elverson, PA, 19520-9974   
					or call 1-888-224-6549   
					
					2.2 Recall Information   
					• Call the U.S. Government’s Auto Safety Hotline   
					at 1-800-424-9393 (202-366-0123 in D.C. area)   
					• www.nhtsa.dot.gov   
					
					2.3 If You Need Help   
					Please contact our Customer Service Department with   
					any questions you may have concerning parts, use, or   
					maintenance. When you contact us, please have your   
					product’s model number ready so that we may help   
					you efficiently. This number can be found on a   
					sticker on the underside of your car seat.   
					
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					4 
				3.0 Features   
					Harness slot   
					Harness clip   
					Harness strap   
					Shoulder belt   
					positioner   
					Harness   
					buckle   
					Harness   
					buckle   
					tongue   
					Crotch strap   
					Harness   
					adjustment   
					button plate   
					Harness   
					adjustment   
					button   
					Harness   
					adjustment strap   
					Accessories (on certain models)   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					5 
				Locking clip   
					storage*   
					Junction plate   
					storage   
					Adjustment   
					belt   
					LATCH &   
					Tether   
					Storage bars   
					LATCH***   
					Tether strap**   
					LATCH   
					Connector   
					Metal junction   
					plate   
					Owner’s manual   
					storage compartment   
					— 
					Tether clip   
					Expiration date   
					*The locking clip is stored on the back of   
					the car seat. You will need to use it with   
					certain types of vehicle seat belts.   
					**Vehicles are now (or can be) equipped with tether   
					anchor points behind some seats. A tether anchors   
					the top of the car seat to the body of the vehicle.   
					When used properly with the vehicle seat belt,   
					a tether helps reduce injury in a sudden stop   
					or crash.   
					***United States Federal Motor Vehicle Safety   
					Standards have defined a new system for installing   
					car seats in vehicles. The system is called LATCH.   
					LATCH may ONLY be used IN PLACE of vehicle belt if   
					vehicle is equipped with LATCH anchor points. Please   
					refer to vehicle owners manual for LATCH locations in   
					vehicles.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					6 
				4.0 Important Information   
					4.1 Warnings   
					• DO NOT INSTALL OR USE THIS CAR SEAT   
					UNTIL YOU READ AND UNDERSTAND THE   
					INSTRUCTIONS IN THIS MANUAL AND IN   
					YOUR VEHICLE OWNER’S MANUAL. DO   
					NOT let others install or use the car seat unless   
					they understand how to use it.   
					• FAILURE TO PROPERLY USE THIS CAR SEAT   
					INCREASES THE RISK OF SERIOUS INJURY OR   
					DEATH IN A SHARP TURN, SUDDEN STOP OR   
					CRASH. Your child can be injured in a vehicle even   
					if you are not in a crash. Sudden braking and sharp   
					turns can injure your child if the car seat is not   
					properly installed or if your child is not properly   
					secured in the car seat.   
					• According to accident statistics, CHILDREN ARE   
					SAFER WHEN PROPERLY RESTRAINED IN   
					REAR VEHICLE SEATING POSITIONS, RATHER   
					THAN FRONT SEATING POSITIONS. For a vehicle   
					with a front passenger air bag, refer to your vehicle   
					owner’s manual as well as these instructions for car   
					seat installation.   
					• NEVER LEAVE YOUR CHILD UNATTENDED.   
					• NEVER LEAVE A CAR SEAT UNSECURED IN   
					YOUR VEHICLE. An unsecured car seat can be   
					thrown around and may injure occupants in a sharp   
					turn, sudden stop or crash. Remove it or make sure   
					that it is securely belted in the vehicle. If not using   
					LATCH, make sure LATCH connectors are properly   
					stored on back of seat.   
					• REPLACE THE CAR SEAT AFTER AN ACCIDENT   
					OF ANY KIND. An accident can cause damage to   
					the car seat that you cannot see.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					7 
				• STOP USING CAR SEAT AND THROW IT AWAY   
					after the date molded into the back of the car seat.   
					• DO NOT MODIFY YOUR CAR SEAT or use any   
					accessories or parts supplied by other manufacturers.   
					• NEVER USE CAR SEAT IF IT HAS DAMAGED OR   
					MISSING PARTS. DO NOT use a cut, frayed or   
					damaged car seat harness, LATCH belt or vehicle   
					seat belt.   
					• THE CAR SEAT CAN BECOME VERY HOT IF   
					LEFT IN THE SUN. Contact with these parts can   
					burn your child’s skin. Always touch the surface of   
					any metal or plastic parts before putting your child   
					in the car seat.   
					• THIS CHILD RESTRAINT CONFORMS to all   
					applicable Federal Motor Vehicle Safety Standards   
					and is certified for use in motor vehicles. It is   
					certified for use in Aircraft ONLY when used with   
					the built-in harness. When used as a booster   
					without the harness, this restraint is NOT certified   
					for use in aircraft.   
					• NEVER GIVE THIS CAR SEAT to someone else   
					without also giving them this manual.   
					• NEVER USE A SECOND-HAND CAR SEAT or a car   
					seat whose history you do not know.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					8 
				4.2 Height and Weight Limitations   
					FAILURE TO USE CAR SEAT IN A MANNER   
					APPROPRIATE FOR YOUR CHILD’S SIZE MAY   
					INCREASE THE RISK OF SERIOUS INJURY OR   
					DEATH. Instructions for the use of this car seat   
					and your vehicle’s seat belt differ greatly depending   
					on the size of your child. Be sure you are using the car   
					seat in the correct mode and with the correct features   
					for your child.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					9 
				4.2.1 WITH Built in Harness   
					Your child MUST meet all requirements:   
					• WEIGHT: 20 to 40 lbs. (9 to 18 kg)   
					• HEIGHT: 27 to 43 inches (69 to 109 cm)   
					• At least one year old and can sit upright unassisted   
					• Shoulders are BELOW top harness slots. If   
					shoulders are above top harness slots, child is   
					too large for built-in harness.   
					If child is between 30 and 40 lbs. and shoulders   
					are below the upper harness slots, we highly   
					recommend use of the built-in harness for as long   
					as it is suitable and comfortable (up to 40 lbs).   
					4.2.2 WITHOUT Built in Harness   
					Your child MUST meet all requirements:   
					• WEIGHT: 30 to 80 lbs. (14 to 36 kg)   
					• HEIGHT: 35 to 54 inches (89 to 138 cm)   
					• Child’s ears are BELOW top of booster seat. If tops   
					of ears are above top of seat, child is too large for   
					booster seat.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					10   
				5.0 Car Seat Location   
					5.1 Vehicle Seat Requirements   
					IMPROPER PLACEMENT OF THE CAR SEAT   
					INCREASES THE RISK OF SERIOUS INJURY   
					OR DEATH. Some seating positions in your vehicle   
					may not be safe for this car seat. Some vehicles do   
					not have any seating positions that can be used   
					safely with the car seat. If you are not sure where   
					to place the car seat in your vehicle, consult your   
					vehicle owner’s manual or call Graco Children's   
					Products Inc., 1-888-224-6549.   
					• Children are safer when properly restrained in   
					rear vehicle seating positions. Whenever possible   
					secure the car seat in the center position of the seat   
					directly behind the front seats. However, this position   
					is often equipped with a   
					lap belt only and cannot   
					be used when this car   
					seat is used without the   
					built-in harness.   
					• The vehicle seat must face forward.   
					• Front of car seat must not hang   
					over edge of vehicle seat.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					11   
				5.2 Vehicle Seat Belt   
					Requirements   
					MANY SEAT BELT SYSTEMS ARE NOT SAFE TO   
					USE WITH THE CAR SEAT. THE VEHICLE SEAT   
					BELT MUST BE DESIGNED TO HOLD THE CAR   
					SEAT TIGHTLY AT ALL TIMES.   
					Pay careful attention to these systems; some of the   
					seat belts that are not safe to use look very much   
					like seat belts that are safe to use. If you are   
					unsure, consult your vehicle owner’s manual or call   
					Graco Children's Products Inc., 1-888-224-6549.   
					5.2.1 UNSAFE Vehicle   
					Belt Systems   
					DO NOT USE ANY OF THE FOLLOWING SYSTEMS   
					TO SECURE THE CAR SEAT. LATCH can be used IN   
					PLACE OF the following unsafe belt systems if your   
					vehicle is equipped with LATCH anchor points. NEVER   
					USE unsafe belt systems. Please refer to the vehicle   
					owners manual for LATCH locations.   
					• Lap Belts with Emergency   
					Locking Retractor (ELR)   
					This lap belt stays loose and   
					can move until it locks in a   
					crash or sudden stop.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					12   
				• Combination   
					Lap/Shoulder   
					Belt with Retractor   
					Each strap has a retractor   
					at one end and is attached   
					to the latch plate at the   
					other end.   
					• Passive Restraint -   
					Lap or Shoulder Belt   
					Mounted on Door   
					• Passive Restraint -   
					Lap Belt with Motorized   
					Shoulder Belt   
					DO NOT use vehicle belts   
					that are attached to the   
					door in any way or that   
					move along a track to   
					automatically surround   
					the passenger when the   
					door is closed.   
					• Lap Belts Forward of   
					Seat Crease   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					13   
				5.2.2 SAFE Vehicle Belt   
					Systems   
					THE FOLLOWING BELT SYSTEMS CAN BE USED   
					WITH YOUR CAR SEAT, IF the seat location meets   
					all other requirements of these instructions and those   
					in your vehicle owner's manual. LATCH can be used in   
					place of the following vehicle restraint systems if your   
					vehicle is equipped with LATCH anchor points. Please   
					refer to vehicle owners manual for LATCH locations.   
					For Built-in Harness Only   
					• Lap Belts - Manually Adjusted   
					When buckled, the belt is tightened manually by   
					pulling on the excess belt.   
					• Lap Belts with Automatic Locking Retractor (ALR)   
					The automatic locking retractor will not permit the lap   
					belt to lengthen once it is buckled. Tighten the belt   
					by feeding the belt back into the retractor while   
					pushing down hard on the car seat.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					14   
				With OR Without Built-in   
					Harness   
					• Combination Lap/Shoulder Belt with Locking   
					Latch Plate   
					Once it is buckled, this type of belt has a latchplate   
					that will not allow the lap portion of the belt to loosen.   
					Belt is tightened by pulling hard on the shoulder   
					portion of the vehicle belt while pushing down hard   
					on the car seat.   
					• Combination Lap/Shoulder Belt with Sliding   
					Latch Plate   
					This belt has a latchplate that slides freely along   
					the belt.   
					WITH Built-in harness: This belt MUST be   
					converted to prevent movement of the lap   
					portion of the belt. You must use   
					the locking clip provided with the   
					car seat, unless your vehicle's seat   
					belt can be converted in another   
					Locking clip   
					way as described in your vehicle   
					owner's manual.   
					WITHOUT Built-in harness: Conversion or locking   
					clip are not needed.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					15   
				To Install Locking Clip:   
					1. Tighten the buckled   
					belt by pushing down   
					hard on the car seat   
					and pulling hard on the   
					shoulder belt.   
					2. While pushing down   
					on seat, pinch the two   
					straps together behind   
					the buckle tongue.   
					Unbuckle the belt without   
					allowing it to slip.   
					3. Connect lap and   
					shoulder belts as   
					shown Ê.   
					Ê 
					½” (1.25 cm)   
					4. Rebuckle belt. Check   
					that lap belt does not   
					move by pulling hard. If   
					belt loosens or lengthens,   
					repeat procedure.   
					Remove locking clip when   
					not using car seat. Store   
					under it’s tab on the back   
					of seat.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					16   
				With LATCH   
					Newer vehicles have one or more seating positions   
					with LATCH anchorage systems. If vehicle is equipped   
					with LATCH, the vehicle lower anchor points may be   
					visible at the vehicle seat crease. If not visible, they   
					may be marked with the symbol below Ë.   
					Ë 
					Ì 
					Í 
					See your vehicle owner’s manual for exact   
					locations, anchor identification, and requirements   
					for use with a car seat.   
					Typical seat in a passenger vehicle. Other vehicle   
					types may have different LATCH locations.   
					Vehicle   
					Top Tether Anchor   
					Points   
					Vehicle Lower   
					Anchor Points   
					Vehicle   
					Seat Crease   
					Check vehicle owner’s manual for vehicle top tether   
					anchor locations. They may be identified using one   
					of the anchor symbols as shown above or .   
					Ì 
					Í 
					ONLY use LATCH on a car seat in a seating position   
					recommended by vehicle manufacturer.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					17   
				6.0 Using Car Seat WITH   
					Built-in Harness   
					6.1 Positioning the Harness   
					Straps   
					FAILURE TO PROPERLY ADJUST THE HARNESS   
					STRAPS FOR YOUR CHILD INCREASES THE RISK   
					OF SERIOUS INJURY OR DEATH IN THE EVENT OF   
					A SHARP TURN, SUDDEN STOP OR CRASH.   
					Snugly adjust the belts provided with this child restraint   
					around your child.   
					1. Open harness clip Ê.   
					Ê 
					Ë 
					2. Unbuckle harness   
					straps Ë.   
					3. Place child in the seat.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					18   
				4. Check the crotch strap.   
					Choose the position that   
					is closest to but not under   
					your child.   
					Ì 
					To move the strap:   
					Reach under seat and   
					push the metal retainer   
					up through the slot   
					sideways Ì. Place the   
					retainer in the appropriate   
					slot. Pull on buckle to   
					make sure it is secure.   
					5. The harness straps   
					must go into the slots   
					even with or just above   
					the shoulders Í.   
					Í 
					Î 
					6. If straps are in the proper   
					slots, go to step 11 on   
					page 21.   
					7. To adjust harness   
					straps: Remove straps   
					from metal junction   
					plate Î.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					19   
				8. Pull strap ends through   
					slots and reinsert them   
					in the correct slots Ê   
					as determined in step 5,   
					page 19.   
					Ê 
					Ë 
					9. Reassemble straps onto   
					metal junction plate   
					exactly as shown Ë.   
					Check that straps are   
					completely within the   
					slots.   
					10. Check that the straps are   
					inserted at the same level   
					and that they are not   
					twisted. Pull on harness   
					to make sure it is   
					secure.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					20   
				11. Harness Adjustment   
					Ì 
					Loosen the harness   
					straps by fully pushing in   
					the red adjustment button   
					on the front of the seat   
					and pulling the straps out   
					at the shoulders as   
					shown   
					. 
					Ì 
					(See also Section 6.3,   
					Securing Your Child in the   
					Car Seat, page 26.)   
					REMEMBER to check   
					the shoulder and crotch   
					straps as your child   
					grows and move them   
					to the next position   
					when necessary.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					21   
				6.2 Securing the Car Seat in   
					Your Vehicle   
					FAILURE TO PROPERLY SECURE THE CAR SEAT   
					IN THE VEHICLE INCREASES THE CHILD’S RISK   
					OF SERIOUS INJURY OR DEATH IN THE EVENT OF   
					A SHARP TURN, SUDDEN STOP OR CRASH.   
					Carefully follow these instructions and those in your   
					vehicle owner’s manual to be sure your car seat is   
					properly located, positioned, and held tightly at all times.   
					6.2.1 With a Vehicle Lap or   
					Lap/Shoulder Belt:   
					Store LATCH. See Section 8.2, Storing LATCH, page 32.   
					1. Place the car seat firmly   
					against the back of a   
					forward-facing vehicle   
					seat.   
					2. Thread the seat belt:   
					For Lap/Shoulder belt   
					For Lap-only belt   
					3. Buckle the vehicle belt.   
					The vehicle belt should   
					not be twisted or turned.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					22   
				4. Tighten vehicle seat belt   
					Ê 
					Push down hard with your   
					knee or free hand in the   
					middle of the car seat Ê.   
					Then pull and tighten the   
					vehicle belt.   
					For more information on   
					how to tighten the belt   
					for your seat belt system,   
					see Section 5.2 Vehicle   
					Seat Belt Requirements,   
					pp. 12-17, or your vehicle   
					owner’s manual.   
					5. If you want to use   
					tether to hold seat in   
					place, secure it now.   
					See Section 8.1 Using   
					the Tether, page 31.   
					When not using the   
					tether,hook it on the   
					tether storage bar on   
					the back of the seat.   
					6. Safety Check for   
					Secure Installation   
					Perform this test every time   
					you drive with your child.   
					Twist and pull car seat front   
					to back and left to right to   
					check that seat is secure   
					Ë. Vehicle belt must stay   
					tight. Car seat must be   
					very tight.   
					Ë 
					If car seat is not secure or   
					loose, repeat procedure OR   
					find another location for the   
					seat, see Section 5.0 Car   
					Seat Location, pp. 11-17.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					23   
				6.2.2 With LATCH   
					1. For ease of installation,   
					extend LATCH to its   
					maximum length.   
					2. Place the car seat firmly   
					against the back of a   
					forward-facing vehicle   
					seat.   
					Ê 
					3. Thread LATCH   
					through the belt   
					path normally used   
					for the vehicle seat   
					belt Ê.   
					Belt must lay flat   
					and not be twisted.   
					Ë 
					Ì 
					4. Hook LATCH   
					Connectors to vehicle   
					lower anchors. Pull   
					firmly on Connectors   
					to be sure they are   
					attached Ë.   
					5. Tighten LATCH by   
					pushing down hard on   
					car seat and pulling the   
					Ì 
					adjustment belt   
					. 
					Í 
					6. NEVER put two LATCH   
					connectors on one   
					vehicle LATCH anchor   
					unless specifically   
					allowed by the   
					Í 
					. 
					manufacturer   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					24   
				7. All LATCH seating   
					positions have tether   
					anchors. Secure the   
					top of the seat using the   
					tether strap. See Section   
					8.1 Using the Tether,   
					page 31.   
					When not using the   
					tether,hook it on the   
					tether storage bar on   
					the back of the seat.   
					8. Safety Check for   
					Î 
					Secure Installation   
					Perform this test every   
					time you drive with your   
					child.   
					Twist and pull car seat   
					front to back and left to   
					right to check that seat is   
					secure Î. LATCH belt   
					must stay tight. Car   
					seat must be very tight.   
					If car seat is not secure,   
					repeat procedure OR find   
					another location for the   
					seat, see Section 5.0 Car   
					Seat Location, pp. 11-17.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					25   
				6.3 Securing Your Child in the   
					Car Seat   
					FAILURE TO PROPERLY SECURE YOUR CHILD   
					IN THE CAR SEAT INCREASES THE RISK OF   
					SERIOUS INJURY OR DEATH IN THE EVENT OF   
					A SHARP TURN, SUDDEN STOP OR CRASH.   
					In a crash, the car seat provides NO protection for   
					your child unless the harness straps are properly   
					secured. Follow these instructions carefully to   
					properly secure your child.   
					• ADJUST THE HARNESS SYSTEM SNUGLY   
					EVERY TIME you place your child in the car seat.   
					• Avoid bulky clothing.   
					1. Place child in car seat   
					Ê 
					with child’s back flat   
					against back of car seat.   
					2. Place harness straps   
					over child’s shoulders   
					and insert tongues into   
					buckle Ê.   
					CHECK that straps are   
					not twisted.   
					CHECK that harness is   
					securely latched by   
					pulling up on straps.   
					DO NOT use car seat if   
					harness does not latch.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					26   
				3. Pull the adjustment strap   
					to securely tighten the   
					harness Ë.   
					Ë 
					Ì 
					Í 
					4. Fasten harness clip Ì.   
					Position harness clip   
					at middle of child’s chest,   
					level with armpits.   
					5. Make sure straps are   
					flat and tight against   
					child’s shoulders. You   
					should not be able to   
					insert more than one   
					finger between harness   
					and child’s shoulder Í.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					27   
				7.0 Using Car Seat WITHOUT   
					Built-in Harness   
					FAILURE TO PROPERLY   
					Ê 
					SECURE YOUR CHILD AND   
					THE BOOSTER SEAT IN YOUR   
					VEHICLE INCREASES THE   
					RISK OF SERIOUS INJURY OR   
					DEATH IN THE EVENT OF A   
					SHARP TURN, SUDDEN STOP   
					OR CRASH.   
					You must always use a vehicle   
					lap/shoulder belt to secure your   
					child and the booster seat.   
					Ë 
					LATCH will not secure your child   
					in the booster seat. Use only the   
					vehicle’s lap and shoulder belt   
					system when restraining the child   
					in this booster seat Ê.   
					NEVER use a vehicle lap-only   
					belt across front of child Ë.   
					Ì 
					Í 
					Vehicle belts MUST lay flat   
					against child and MUST not be   
					twisted.   
					DO NOT use shoulder belt loose   
					or positioned under arm Ì.   
					Lap portion of lap/shoulder belt   
					MUST be low and snug on hips,   
					just touching thighs.   
					DO NOT allow child to slide   
					down in booster seat Í.   
					If child will not keep vehicle restraint properly   
					positioned, DO NOT use this booster seat. Use   
					a different child restraint system.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					28   
				7.1 Harness Removal   
					1. Remove harness straps   
					from metal junction   
					plate. See figure 5 on   
					page 19 for more help.   
					Î 
					Pull the straps through   
					harness slots. Do not   
					remove buckles or   
					harness clip from   
					straps   
					. 
					Î 
					Push straps, buckles   
					and harness clip through   
					bottom of seat.   
					2. Remove crotch strap.   
					See figure 3 on page 19   
					for more help.   
					Ï 
					Buckle crotch strap to   
					harness and fasten   
					harness clip together   
					for storage.   
					3. Metal junction plate   
					and strap are not   
					removable. Push in red   
					adjustment button and   
					pull strap to rear of seat   
					Ð 
					. Snap junction plate   
					Ï 
					in back of seat   
					. 
					Ð 
					4. Store LATCH. See   
					Section 8.2, Storing   
					LATCH, page 32.   
					5. Reverse instructions to   
					reinstall. See figure 1 on   
					page 38 for the correct   
					path for the harness.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					29   
				7.2 Securing Child and Booster   
					Seat in Vehicle   
					1. Place car seat firmly   
					against the back of a   
					forward-facing vehicle   
					seat equipped with a   
					lap/shoulder belt only.   
					2. If you want to use tether   
					to hold seat in place,   
					secure it now. See   
					Section 8.1 Using the   
					Tether, page 31.   
					3. Place child in car seat   
					Ê 
					with child’s back flat   
					against back of car seat.   
					4. Position lap/shoulder   
					belt as shown Ê.   
					Fasten buckle and pull   
					up on the shoulder belt   
					to tighten.   
					5. If belt lays across child’s   
					neck, head or face,   
					redirect belt across chest   
					using the shoulder belt   
					positioner. Thread vehicle   
					shoulder belt through one   
					of the three positioners   
					exactly as shown Ë.   
					Ë 
					6. Check that shoulder belt   
					is properly positioned   
					over shoulder and snug   
					against child.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					30   
				8.0 Additional information   
					8.1 Using the Tether   
					All LATCH seating positoins have tether anchors. If you   
					want to use the tether, check your vehicle owner’s   
					manual for the location(s). If your vehicle is not   
					equipped with a tether anchor, it may be possible   
					to install one. Contact your vehicle dealership for the   
					proper anchor location and installation. You may   
					purchase a tether anchor parts kit by calling Graco   
					Customer Service at 1-888-224-6549.   
					1. Check that tether is   
					Ì 
					securely attached to   
					car seat.   
					2. Fasten tether clip to   
					anchor point Ì.   
					3. Tighten the tether strap   
					securely Í.   
					4. Check car seat tightness   
					Í 
					after securing tether.   
					If necessary, retighten   
					vehicle seat belt when   
					used with the built-in   
					harness.   
					5. To loosen, lift up on   
					the metal tongue of the   
					buckle Î.   
					Î 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					31   
				8.2 Storing LATCH   
					1. For ease of storing,   
					extend LATCH to its   
					maximum length.   
					2. Locate the storage   
					bars on back of car   
					seat Ê.   
					3. Fasten ends of LATCH   
					onto storage bars as   
					shown.   
					Ê 
					Storage bars   
					4. After fastening onto   
					storage bar, pull on   
					adjustment belt to   
					make sure LATCH is   
					securely fastened.   
					5. LATCH storage   
					should look like this   
					Ê 
					when complete   
					. 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					32   
				8.3 Airplane Use   
					This restraint is certified for use in Motor Vehicles. It is   
					certified for use in Aircraft ONLY when used with the   
					built-in harness. When used as a booster without   
					the harness, this restraint is NOT certified for use   
					in aircraft because there is no shoulder belt available.   
					Important points to remember   
					1. Airlines have some restrictions about the use of   
					car seats.   
					2. Install your car seat on an airplane in the same way   
					it is installed in an automobile with a lap belt (see   
					Section 6.2.1, Securing the Car Seat in Your   
					Vehicle with a Vehicle Lap or Lap/Shoulder Belt,   
					pp. 22-23).   
					3. Check that the airplane seat belt holds the car seat   
					securely in place at all times.   
					8.4 Accessories   
					(on certain models)   
					1. Insert the two prongs   
					Ë 
					of the cupholder into   
					the two slots on either   
					the left or right side of   
					the seat Ë.   
					2. Push cupholder down   
					until the clip snaps onto   
					the bottom of seat Ì.   
					CHECK that cupholder   
					is secure by pulling on it.   
					Ì 
					Clip   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					33   
				8.5 Using Recline Foot   
					(on certain models)   
					Some models come with a recline foot on the bottom   
					of the seat.   
					Ê 
					1. To use recline: flip foot to   
					front of seat. Ê.   
					2. For storage: flip foot   
					toward rear of seat. Ê   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					34   
				9.0 Care and Maintenance   
					• CONTINUOUS USE OF CAR SEAT MAY CAUSE   
					DAMAGE TO VEHICLE SEAT. Use a car seat mat,   
					towel or thin blanket to protect upholstery.   
					• METAL AND PLASTIC PARTS: clean with mild soap   
					and cool water. No bleach or detergents.   
					• HARNESS STRAPS AND LATCH STRAPS: spot   
					clean or replace. Do not immerse the straps in water.   
					Doing so may weaken the straps.   
					• BUCKLE AND HARNESS ADJUSTER: clean with   
					a damp cloth.   
					• NEVER LUBRICATE THE BUCKLE. If buckle or   
					harness adjuster sticks or will not remain tight, check   
					for foreign objects such as food, dirt, etc. Remove   
					objects with tweezers and/or clean with a cotton   
					swab. If you cannot get the harness to remain tight   
					with the buckle securely locked, do not use this car   
					seat. Call Graco at 1-888-224-6549 to purchase a   
					replacement harness or buckle.   
					• SEAT COVER: clean with a damp sponge using   
					mild soap and cool water. If necessary, cover may   
					be removed for cleaning (see next page).   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					35   
				To Remove Seat Cover   
					1. Remove harness and   
					crotch straps (see Section   
					7.1, Harness Removal,   
					page 29 for help).   
					Ê 
					2. Remove elastic   
					loops and hooks   
					from seat as   
					shown Ê.   
					Ë 
					Ì 
					3. Under the front of the seat   
					push in the tab to remove   
					the adjustment button   
					plate   
					. 
					Ë 
					4. Turn adjustment plate   
					sideways and work it   
					through the hole in the   
					seat cover . It will be a   
					Ì 
					tight fit so be careful not   
					to tear the seat cover.   
					5. Lift cover off seat,   
					pushing harness straps,   
					crotch strap and hardware   
					through slots in cover. DO   
					NOT USE car seat without   
					the seat cover.   
					6. Machine wash cover in   
					cold water on delicate   
					cycle and drip-dry. DO   
					NOT USE BLEACH.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					36   
				To Reinstall Seat Cover   
					1. To put the seat cover back   
					on, reverse preceding   
					instructions. Push the   
					adjustment plate and strap   
					through the hole in the   
					seat cover. Be careful not   
					to tear the seat cover.   
					2. Insert the two fingers of   
					the adjustment plate   
					into the back of   
					Í 
					the hole in the seat   
					. 
					Í 
					Î 
					Ï 
					3. Push the fabric up so   
					that the tab under the   
					adjustment plate is under   
					the cloth . Snap the   
					Î 
					adjustment plate back on   
					the seat . Make sure   
					Ï 
					that the adjustment plate   
					is attached securely to the   
					seat and that the strap   
					moves freely when the   
					button is pushed.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					37   
				4. Thread the harness   
					straps through the   
					appropriate holes in   
					the seat cover.   
					Ê 
					See the illustration at   
					right and section 6.1,   
					“Positioning the   
					Harness Straps”   
					page 18 to properly   
					secure the harness   
					straps back on the   
					seat   
					. 
					Ê 
					5. Secure the seat   
					cover to the seat   
					by reattaching the   
					elastic loops and   
					hooks to the seat.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					38   
				Notes   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					39   
				10.0 Replacement Parts   
					How to Order:   
					Complete the form that follows. Your car seat model   
					number MUST be included on the form to ensure   
					proper replacement parts. Your model number can be   
					found on a sticker on the underside of your car seat.   
					Payment must accompany your order.   
					Parts may also be ordered from Graco’s web site at   
					
					Parts List:   
					Price:*   
					Locking clip . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.00   
					Harness strap with buckle tongues   
					and harness clip . . . . . . . . . . . . . . . . . . . . . . . .$15.00   
					Seat cover . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.00   
					Crotch strap with buckle . . . . . . . . . . . . . . . . . . .$8.00   
					Tether strap . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.00   
					Harness Clip . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.00   
					Cupholder . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.00   
					Mesh holder . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.00   
					LATCH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$20.00   
					*Prices subject to change without notice   
					IF YOU NEED HELP   
					If you have any questions or need any parts not listed,   
					please call toll-free: 1-888-224-6549   
					or visit our Internet website,   
					
					Return the form with payment to:   
					GRACO CHILDREN’S PRODUCTS INC.   
					CUSTOMER SERVICE DEPARTMENT   
					P.O. BOX 100, MAIN STREET   
					ELVERSON, PA 19520   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					40   
				Model No.   
					(Number Required)   
					Subtotal:   
					Locking clip   
					Harness strap with   
					buckle tongues and   
					harness clip   
					Shipping   
					& handling*:   
					$5.00   
					Sales tax**:   
					Total:   
					Seat cover   
					Crotch strap w/buckle   
					Tether strap   
					Harness Clip   
					Cupholder   
					* $15.00 outside the   
					continental U.S.   
					**CA 7.25%, IL 6.25%, IN 5%, NY   
					8.25%, OH 5.75%, PA 6%, SC 5%   
					Mesh holder   
					LATCH   
					Check or money order enclosed   
					(payable to Graco Children’s Products Inc.)   
					Charge to credit card   
					Visa   
					MasterCard   
					Discover   
					Account #   
					Expiration date   
					Signature   
					SHIP TO:   
					Name   
					Address   
					City, State, Zip Code   
					Telephone (including Area Code)   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					41   
				Asiento para automóvil/   
					asiento para niños   
					Manual del propietario   
					Modelo 8487, 8489   
					LEA ESTE MANUAL.   
					No instale ni use este asiento para automóvil hasta que   
					haya leído y entendido las instrucciones en este manual.   
					NO USAR DEBIDAMENTE ESTE ASIENTO   
					PARAAUTOMÓVIL AUMENTA EL RIESGO   
					DE LESIONES SERIAS O MUERTE EN UNA   
					PARADA REPENTINA O ACCIDENTE   
					© 2002 Graco 4005-5-02   
					40050502   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					Índice de materias   
					1.0 Advertencias a padres y otros usuarios . . . . . . . . . . .3   
					2.0 Información sobre el registro . . . . . . . . . . . . . . . . . . . .4   
					2.1 Registre su asiento para automóvil . . . . . . . . . . . . .4   
					2.2 Información sobre el retiro de productos del mercado .4   
					2.3 Si necesita ayuda . . . . . . . . . . . . . . . . . . . . . . . . . .4   
					3.0 Características . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6   
					4.0 Información importante . . . . . . . . . . . . . . . . . . . . . .7-10   
					4.1 Advertencias . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7   
					4.2 Limitaciones de peso y altura . . . . . . . . . . . . . . . . .9   
					4.2.1 CON el arnés incorporado . . . . . . . . . . . . . .10   
					4.2.2 SIN de arnés incorporado . . . . . . . . . . . . . .10   
					5.0 Ubicación del asiento para automóvil . . . . . . . . .11-16   
					5.1 Requisitos del asiento del vehículo . . . . . . . . . . . .11   
					5.2 Requisitos del cinturón de seguridad del vehículo .12   
					5.2.1 Sistemas PELIGROSOS de cinturones   
					de vehículos . . . . . . . . . . . . . . . . . . . . . . . .12   
					5.2.2 Sistemas SEGUROS de cinturones   
					de vehículos . . . . . . . . . . . . . . . . . . . . . . . .14   
					6.0 Uso del asiento para automóviles con el   
					arnés incorporado . . . . . . . . . . . . . . . . . . . . . . . .18-27   
					6.1 Colocación de las correas del arnés . . . . . . . . . . .18   
					6.2 Asegurar el asiento del automóvil en su vehículo .22   
					6.2.1 Con el cinturón del vehículo de regazo o   
					de regazo/hombro . . . . . . . . . . . . . . . . . . . .22   
					6.2.2 Con LATCH . . . . . . . . . . . . . . . . . . . . . . . . .24   
					6.3 Asegurar a su niño en el asiento del automóvil . . .26   
					7.0 Uso del asiento para automóviles sin   
					arnés incorporado . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-30   
					7.1 Eliminación del arnés . . . . . . . . . . . . . . . . . . . . . .29   
					7.2 Asegurar al niño y la asiento para niños   
					en el vehículo . . . . . . . . . . . . . . . . . . . . . . . . . . . .30   
					8.0 Información adicional . . . . . . . . . . . . . . . . . . . . . .31-34   
					8.1 Uso de la sogar . . . . . . . . . . . . . . . . . . . . . . . . . .31   
					8.2 Almacenamiento del LATCH . . . . . . . . . . . . . . . . .32   
					8.3 Uso en aeronaves . . . . . . . . . . . . . . . . . . . . . . . .33   
					8.4 Accesorios (ciertos modelos) . . . . . . . . . . . . . . . .33   
					8.5 Uso del pie de reclinación (en ciertos modelos) . .34   
					9.0 Cuidado y mantenimiento . . . . . . . . . . . . . . . . . . .35-38   
					10.0 Piezas de repuesto . . . . . . . . . . . . . . . . . . . . . . . . .40-41   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					2 
				1.0 Advertencias a padres   
					y otros usuarios   
					No usar debidamente este asiento para automóvil   
					aumenta el riesgo de lesiones serias o muerte en   
					una curva cerrada, parada repentina o accidente. La   
					seguridad de su niño depende de que usted instale y   
					use este asiento para automóvil correctamente.   
					A pesar de que el uso de este asiento para automóvil   
					parezca fácil de descifrar, es muy importante LEER   
					EL MANUAL DEL PROPIETARIO y el manual del   
					propietario del vehículo.   
					La seguridad de su niño depende de:   
					1. Elegir el modo de uso correcto del asiento de   
					seguridad, según el tamaño de su niño.   
					2. Insertar las correas (si resultan necesarias) en las   
					ranuras correctas para su niño.   
					3. Elegir una ubicación adecuada para el asiento de   
					seguridad en su vehículo.   
					4. Colocar el cinturón de seguridad del vehículo o   
					LATCH de manera correcta.   
					5. Sujetar el asiento de seguridad en el vehículo   
					correctamente usando un cinturón de seguridad   
					diseñado para contener ambos el asiento de   
					seguridad y su niño o usando LATCH. Muchos   
					cinturones de seguridad NO son seguros para su   
					uso con este asiento de seguridad, incuso si se   
					colocan fácilmente a través o alrededor de este   
					asiento de seguridad.   
					6. Sujetar a su niño correctamente en el asiento   
					de seguridad.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					3 
				2.0 Información sobre   
					el registro   
					Número de modelo:   
					Fabricado en:   
					Fecha de compra:   
					2.1 Registre su asiento   
					para automóvil   
					Por favor, complete la información que se solicita   
					más arriba. El número de modelo pueden encontrarse   
					en una etiqueta ubicada debajo del asiento para   
					automóvil. Llena la tarjeta postal de registro   
					prepagada que se encuentra en la tapa del asiento   
					y envíela hoy mismo.   
					Los dispositivos de seguridad para niños podrán ser   
					retirados del mercado por problemas de seguridad.   
					Debe registrar este sistema para que lo podamos   
					contactar en dicho caso. Envíe su nombre, dirección   
					y número de modelo a:   
					Graco Children’s Products Inc.   
					P.O. Box 100   
					Elverson, PA, 19520-9974   
					o llame al 1-888-224-6549   
					o www.gracobaby.com   
					2.2 Información sobre el retiro   
					de productos del mercado   
					• Llame a la Línea telefónica sobre seguridad en   
					automóviles del gobierno de EE.UU. al   
					1-800-424-9393 (202-366-0123 en la zona   
					de Washington, D.C.)   
					• www.nhtsa.dot.gov   
					
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					4 
				2.3 Si necesita ayuda   
					Por favor, comuníquese con el Departamento de   
					Servicio al Cliente con cualquier pregunta que pudiera   
					tener sobre piezas, uso o mantenimiento. Cuando se   
					ponga en contacto con nosotros, por favor tenga listo   
					el número de modelo de su producto para que lo   
					podamos ayudar más eficientemente. Estos números   
					pueden encontrarse en una etiqueta ubicada abajo del   
					asiento para automóvil.   
					
					3.0 Características   
					Ranura para el arnés   
					Traba del arnés   
					Correa del arnés   
					Colocador   
					de la correa   
					del hombro   
					Hebilla   
					del arnés   
					Lengüeta de   
					la hebilla de   
					las correas   
					Correa para   
					la entrepierna   
					Placa de   
					ajustes del   
					arnés   
					Botón de   
					ajustes del   
					arnés   
					Correa de ajustes   
					del arnés   
					Accesorios (ciertos modelos)   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					5 
				Almacenamiento   
					de la traba de   
					seguridad*   
					Almacenaje para   
					la placa de unión   
					Cinturón   
					de ajuste   
					Barras de   
					almacenamiento   
					del LATCH y la   
					soga   
					LATCH***   
					Correa de la   
					soga**   
					Conector   
					del LATCH   
					Placa de unión   
					metálica   
					Compartimiento de   
					almacenamiento del   
					manual del propietario   
					Traba de   
					la soga   
					— 
					Fecha de vencimiento   
					*La traba de seguridad se guarda en el   
					respaldo del asiento para automóvil.   
					Necesitará usarlo con ciertos tipos de   
					cinturones de seguridad de automóviles.   
					**Los vehículos ahora vienen equipados (o pueden estar   
					equipados) con puntos de sujetación de la soga detrás   
					de algunos asientos. Una soga sujeta la parte superior   
					del asiento para automóvil a la carrocería del vehículo.   
					Cuando se usa debidamente con el cinturón de   
					seguridad del vehículo, la soga ayuda a reducir las   
					lesiones en una parada repentina o accidente.   
					***Las Normas Federales para Seguridad de Automóviles   
					de Estados Unidos han determinado un nuevo sistema   
					de instalación de asientos de seguridad en los   
					vehículos. El sistema se denomina LATCH. LATCH   
					debe usarse EN LUGAR del cinturón del vehículo   
					SOLAMENTE si el vehículo está equipado con puntos   
					de anclaje LATCH. Por favor, consulte el manual del   
					propietario del vehículo para obtener las ubicaciones   
					donde debe instalarse el LATCH en los vehículos.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					6 
				4.0 Información importante   
					4.1 Advertencias   
					• NO INSTALE NI USE ESTE ASIENTO PARA   
					AUTOMÓVIL HASTA QUE HAYA LEÍDO Y   
					ENTENDIDO LAS INSTRUCCIONES EN ESTE   
					MANUAL Y EN EL MANUAL DEL PROPIETARIO   
					DE SU VEHÍCULO. NO deje que otros instalen   
					o usen el asiento del automóvil a menos que   
					entiendan cómo usarlo.   
					• NO USAR DEBIDAMENTE ESTE ASIENTO   
					PARA AUTOMÓVIL AUMENTA EL RIESGO DE   
					LESIONES SERIAS O MUERTE EN UNA CURVA   
					CERRADA, PARADA REPENTINA O ACCIDENTE.   
					Su niño puede sufrir una lesión en un vehículo   
					aunque no sufra un accidente. Una frenada   
					repentina o una curva cerrada puede lesionar a   
					su niño si el asiento para automóvil no está   
					debidamente instalado o si el niño no está   
					debidamente asegurado en el asiento del automóvil.   
					• Según las estadísticas de accidentes, LOS   
					NIÑOS ESTÁN MÁS SEGUROS CUANDO ESTÁN   
					DEBIDAMENTE SUJETADOS EN LOS ASIENTOS   
					TRASEROS DEL VEHÍCULO EN LUGAR DE A   
					LOS ASIENTOS DELANTEROS. En el caso de   
					un vehículo con una bolsa de aire para el pasajero   
					delantero, consulte el manual del propietario de   
					su vehículo así como estas instrucciones para la   
					instalación del asiento para automóvil.   
					• NUNCA DEJE A SU NIÑO SIN ATENDER.   
					• NUNCA DEJE UN ASIENTO SIN SUJETAR EN   
					SU VEHÍCULO. Un asiento sin sujetar puede ser   
					arrojado y podría lesionar a los ocupantes en una   
					curva cerrada, parada repentina o accidente.   
					Sáquelo o asegúrese de que esté debidamente   
					sujetado en el vehículo. Si no usa el LATCH,   
					asegúrese que los conectores del LATCH estén   
					debidamente almacenados en la parte de atrás   
					del asiento para automóvil.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					7 
				• CAMBIE EL ASIENTO PARA AUTOMÓVIL   
					DESPUÉS DE UN ACCIDENTE DE CUALQUIER   
					TIPO. Un accidente puede causar daño invisible al   
					asiento para automóvi.   
					• DEJE DE USAR EL ASIENTO PARA AUTOMÓVIL   
					Y TÍRELO después de la fecha que aparece   
					moldeada en el respaldo del asiento para automóvil.   
					• NO MODIFIQUE EL ASIENTO PARA AUTOMÓVIL   
					ni use accesorios o piezas suministradas por otros   
					fabricantes.   
					• NUNCA USE EL ASIENTO PARA AUTOMÓVIL   
					SI TIENE PIEZAS DAÑADAS O QUE FALTAN.   
					No use un arnés para asiento para automóvil, el   
					cinturón LATCH o cinturón de seguridad del   
					vehículo que esté cortado, deshilachado o dañado.   
					• EL ASIENTO PARA AUTOMÓVILES PUEDE   
					CALENTARSE MUCHO SI SE LO DEJA EN EL   
					SOL. El contacto con estas partes puede quemar   
					la piel de su niño. Toque siempre la superficie de   
					cualquier pieza de metal o de plástico antes de   
					poner a su niño en el asiento para automóvil.   
					• ESTE SISTEMA PARA NIÑOS CUMPLE con todas   
					las Normas Federales de Seguridad para Vehículos   
					Automotor y ha sido certificado para el uso en   
					vehículos automotor. Ha sido certificado para uso   
					en aeronaves solamente cuando se lo usa con el   
					arnés incorporado. Cuando se lo usa como asiento   
					para niños sin el arnés, este sistema no ha sido   
					certificado para ser usado en aeronaves.   
					• NUNCA ENTREGUE ESTE ASIENTO PARA   
					AUTOMÓVIL a otra persona sin entregarles   
					este manual.   
					• NUNCA USE UN ASIENTO PARA AUTOMÓVIL   
					USADO o un asiento para automóvil cuya historia   
					no conoce.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					8 
				4.2 Limitaciones de peso   
					y altura   
					NO USAR EL ASIENTO PARA AUTOMÓVIL DE   
					MANERA APROPIADA SEGÚN EL TAMAÑO DE   
					SU NIÑO PODRÍA AUMENTAR EL RIESGO DE   
					SUFRIR UNA LESIÓN SERIA O LA MUERTE.   
					Las instrucciones para el uso de este asiento para   
					automóvil y el cinturón de seguridad del vehículo   
					difieren mucho dependiendo del tamaño de su niño.   
					Asegúrese de que usa el asiento para automóvil de   
					la manera correcta y con las funciones correctas   
					para su niño.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					9 
				4.2.1 CON el arnés incorporado   
					Su niño DEBE CUMPLIR todos los requisitos:   
					• PESO: 20 a 40 libras (9 a 18 kg)   
					• ALTURA: 27 a 43 pulgadas (69 a 109 cm)   
					• Por lo menos debe tener un año de edad y debe   
					poder sentarse sin ayuda   
					• Los hombros están DEBAJO de las ranuras   
					superiores del arnés. Si los hombros están por   
					encima de las ranuras superiores del arnés, el niño   
					es demasiado grande para usar el arnés incorporado.   
					Si el niño pesa entre 30 y 40 libras y los hombros   
					se encuentran por debajo de las ranuras   
					superiores del arnés, recomendamos enfáticamente   
					el uso del arnés incorporado mientras sea cómodo   
					y útil (hasta las 40 libras).   
					4.2.2 SIN el arnés incorporado   
					Su niño DEBE CUMPLIR todos los requisitos:   
					• PESO: 30 a 80 libras (14 a 36 kg)   
					• ALTURA: 35 a 54 pulgadas (89 a 138 cm)   
					• Los oídos del niño están DEBAJO de la parte   
					superior de la asiento para niños. Si la parte de   
					arriba de los oídos se encuentran arriba de la   
					parte superior del asiento, el niño es demasiado   
					grande para la asiento para niños.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					10   
				5.0 Ubicación del asiento   
					para automóvil   
					5.1 Requisitos del asiento   
					del vehículo   
					UNA COLOCACIÓN INADECUADA DEL ASIENTO   
					PARA AUTOMÓVIL AUMENTA EL RIESGO DE   
					SUFRIR UNA LESIÓN SERIA O LA MUERTE.   
					Algunas posiciones de sentado en su vehículo podrían   
					no ser seguras para este asiento para automóvil.   
					Algunos vehículos no tienen posiciones de sentado   
					que puedan usarse seguramente con el asiento para   
					automóvil. Si no está seguro sobre dónde colocar el   
					asiento para automóvil en su vehículo, consulte el   
					manual del propietario del vehículo o llame Graco   
					Children's Products, Inc., al 1-888-224-6549.   
					• Los niños están más seguros cuando están   
					debidamente sujetados en las posiciones de   
					sentado trasero en el vehículo. Cuando sea   
					posible, asegure el asiento del automóvil en la   
					posición de sentado central directamente atrás de   
					los asientos delanteros. Sin embargo, esta posición   
					está más a menudo equipada solamente con un   
					cinturón de regazo y   
					no puede usarse con este   
					asiento para automóvil   
					sin el arnés incorporado.   
					• El asiento del vehículo debe mirar hacia adelante.   
					• El frente del asiento para automóvil   
					no debe quedar suspendido sobre   
					el borde del asiento del vehículo.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					11   
				5.2 Requisitos del cinturón   
					de seguridad del vehículo   
					MUCHOS SISTEMAS DE CINTURONES PARA   
					SEGURIDAD NO SON SEGUROS CUANDO SE LOS   
					USA CON EL ASIENTO PARA AUTOMÓVIL. EL   
					CINTURÓN DE SEGURIDAD DEL VEHÍCULO DEBE   
					HABER SIDO DISEÑADO PARA MANTENER EL   
					ASIENTO PARA AUTOMÓVIL APRETADAMENTE   
					EN TODO MOMENTO.   
					Preste mucha atención a estos sistemas ya que   
					muchos de los sistemas de cinturones de seguridad   
					que no son seguros parecen iguales a los que son   
					seguros. Si no está seguro, consulte el manual del   
					propietario del vehículo o llame Graco Children's   
					Products, Inc., al 1-888-224-6549.   
					5.2.1 Sistemas PELIGROSOS   
					de cinturones de vehículos   
					NO USE NINGUNO DE LOS SIGUIENTES SISTEMAS   
					PARAASEGURAR EL ASIENTO PARAAUTOMÓVIL.   
					El LATCH puede usarse EN LUGAR DE los siguientes   
					sistemas de cinturón peligrosos si su vehículo está   
					equipado con puntos de anclaje LATCH. NUNCA USE   
					sistemas de cinturones peligrosos. Por favor, consulte   
					el manual del propietario del vehículo para obtener las   
					ubicaciones donde debe instalarse el LATCH.   
					• Cinturones para la fix me con   
					retractor de seguridad para   
					emergencias (ELR)- Este   
					cinturón de regazo se mantiene   
					suelto y puede moverse hasta   
					que se traba en un accidente o   
					parada repentina.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					12   
				• Combinación de cinturón   
					para el hombro y de   
					regazo con retractor -   
					Cada correa tiene un   
					retractor en una punta   
					y está conectada a la   
					placa de seguridad en   
					la otra punta.   
					• Cinturón pasivo -   
					Cinturón para el   
					hombro o de regazo   
					montado en la puerta   
					• Cinturón pasivo -   
					Cinturón de regazo   
					con cinturón para el   
					hombro motorizado   
					NO use los cinturones   
					del vehículo que estén   
					conectados a la puerta   
					de manera alguna o que   
					se muevan a través de   
					un carril para rodear   
					automáticamente al   
					pasajero cuando se   
					cierra la puerta.   
					• Cinturones de regazo   
					que están más adelante   
					del pliegue del asiento   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					13   
				5.2.2 Sistemas SEGUROS de   
					cinturones de vehículos   
					LOS SIGUIENTES SISTEMAS DE CINTURONES   
					PUEDEN USARSE CON SU ASIENTO PARA   
					AUTOMÓVIL, SI la ubicación del asiento cumple   
					todos los otros requisitos de estas instrucciones y   
					las del manual del propietario del vehículo. El LATCH   
					puede usarse en lugar de los siguientes sistemas de   
					seguridad del vehículo si su vehículo está equipado   
					con puntos de anclaje LATCH. Por favor, consulte el   
					manual del propietario del vehículo para obtener las   
					ubicaciones donde debe instalarse el LATCH.   
					Para el arnés incorporado   
					solamente   
					• Cinturonesde regazo - ajustado manualmente   
					Cuando se activa la hebilla, el cinturón se ajuste   
					manualmente tirando del exceso del cinturón.   
					• Cinturones de regazo con retractor de   
					seguridad automático (ALR)   
					El retractor de seguridad automático no permitirá   
					que el cinturón de regazo se extienda una vez   
					que está sujetado en la hebilla. Ajuste el cinturón   
					pasando el cinturón por el retractor mientras empuja   
					con fuerza el asiento para automóvil hacia abajo.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					14   
				Con O sin el arnés incorporado   
					• Combinación cinturón para el hombro/de regazo   
					con placa de seguridad con traba   
					Una vez que está trabado en la hebilla, este tipo   
					de cinturón tiene una placa de seguridad que no   
					permitirá que la parte del cinturón que está en de   
					regazo se afloje. El cinturón se ajusta tirando con   
					fuerza de la parte del hombro del cinturón del   
					vehículo mientras empuja con fuerza el asiento   
					para automóvil hacia abajo.   
					• Combinación cinturón para el hombro/de regazo   
					con placa de seguridad con traba móvil   
					Este cinturón tiene una placa de seguridad que   
					se mueve libremente a lo largo del cinturón.   
					CON el arnés incorporado: Este cinturón DEBE   
					convertirse para prevenir el movimiento de la parte   
					de regazo del cinturón. Debe usar la traba de   
					seguridad provista con el asiento para automóvil,   
					a menos que el cinturón de seguridad del asiento   
					de su vehículo pueda convertirse   
					de otra manera como se describe   
					en el manual del propietario   
					del vehículo.   
					Traba de seguridad   
					SIN el arnés incorporado: No se necesita la traba   
					de seguridad o de conversión.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					15   
				Para instalar la traba   
					de seguridad:   
					1. Ajuste el cinturón   
					trabado empujando con   
					fuerza el asiento para   
					automóvil hacia abajo   
					y tirando con fuerza el   
					cinturón del hombro.   
					2. Mientras empuja el   
					asiento hacia abajo,   
					apriete las dos correas   
					juntas detrás de la   
					lengüeta de la hebilla.   
					Destrabe el cinturón sin   
					permitir que se mueva.   
					Ê 
					½” (1.25 cm)   
					3. Conecte los cinturones   
					del hombro y de regazo   
					como se indica Ê.   
					4. Vuelva a poner el   
					cinturón en la hebilla.   
					Verifique que el cinturón   
					de regazo no se mueve   
					tirando con fuerza. Si   
					el cinturón se afloja o   
					se alarga, repita el   
					procedimiento.   
					Saque la traba de   
					seguridad cuando no   
					usa el asiento para   
					automóvil. Guárdelo   
					debajo de la lengüeta   
					detrás del asiento.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					16   
				Con LATCH   
					Los vehículos nuevos pueden tener uno o varios   
					asientos equipados con sistemas de anclaje LATCH.   
					Si el vehículo viene equipado con LATCH, se pueden   
					ver los puntos de anclaje inferiores en el pliegue del   
					asiento del vehículo. Si no están visibles, pueden   
					estar marcados con el símbolo que sigue Ë.   
					Vea el manual del propietario de su vehículo para   
					informarse sobre las ubicaciones exactas, la   
					identificación de los anclajes y los requisitos de   
					uso con el sistema de seguridad para niños.   
					Un asiento típico de un vehículo de pasajeros. Otros tipos de   
					vehículos disponen de otras ubicaciones del sistema LATCH.   
					Ë 
					Ì 
					Í 
					Puntos de   
					anclaje superiores   
					del vehículo   
					Puntos de anclaje   
					inferior del vehículo   
					Pliegue del   
					asiento   
					del vehículo   
					Compruebe la ubicación de los puntos de anclaje   
					superiores del vehículo en el manual del propietario   
					del vehículo. Se pueden identificar usando uno de los   
					símbolos de anclaje como se indica en o .   
					Ì 
					Í 
					SOLAMENTE use LATCH en un asiento para   
					automóvil en la posición sentada recomendada por   
					el fabricante del vehículo.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					17   
				6.0 Uso del asiento para   
					automóvil CON arnés   
					incorporado   
					6.1 Colocación de las correas   
					del arnés   
					NO AJUSTAR DEBIDAMENTE LAS CORREAS DEL   
					ARNÉS DE SU NIÑO AUMENTA EL RIESGO DE   
					LESIONES SERIAS O LA MUERTE EN UNA CURVA   
					CERRADA, PARADA REPENTINA O ACCIDENTE.   
					Ajuste apretadamente los cinturones provistos con   
					este sistema de seguridad alrededor de su niño.   
					1. Abra la traba del arnés Ê.   
					Ê 
					Ë 
					2. Destrabe las correas   
					del arnés Ë.   
					3. Coloque al niño en   
					el asiento.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					18   
				4. Verifique la correa de   
					la entrepierna. Elija la   
					posición más cercana   
					pero no debajo de   
					su niño.   
					Ì 
					Para mover la correa:   
					Debajo del asiento,   
					empuje el retén metálico   
					hacia arriba por la ranura   
					de lado Ì. Coloque el   
					retén en la ranura   
					apropiada. Tire de la   
					hebilla para asegurarse   
					de que esté bien sujeta.   
					5. Las correas del arnés   
					deben pasar por las   
					ranuras a la altura o   
					apenas por encima de   
					los hombros Í.   
					Í 
					Î 
					6. Si las correas están en   
					las ranuras correctas,   
					vaya al paso 11 de la   
					página 21.   
					7. Para ajustar las   
					correas: Quite las   
					correas de la placa de   
					unión metálic Î.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					19   
				8. Tire los extremos de las   
					correas a través de las   
					ranuras y vuelva a   
					Ê 
					Ë 
					insertarlos en las ranur   
					as correctas Ê como se   
					determina en el paso 5,   
					página 19.   
					9. Vuelva a montar las   
					correas en la placa de   
					unión metálica   
					exactamente como   
					se indica Ë. Verifique   
					que las correas estén   
					completamente dentro   
					de las ranuras.   
					10. Verifique que las correas   
					se inserten al mismo   
					nivel y que no estén   
					dobladas. Tire del   
					arnés para asegurarse   
					que esté asegurado.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					20   
				11. Ajuste del arnés   
					Ì 
					Suelte las correas   
					oprimiendo completamente   
					el botón rojo de ajustes en   
					el lado delantero del asiento   
					y tirando de las correas   
					hacia fuera en los hombros   
					como se indica   
					. 
					Ì 
					(Vea también la Sección   
					6.3, Asegurar a su niño   
					en el asiento del automóvil,   
					página 26.)   
					RECUERDE verificar las   
					correas para la entrepierna   
					y del hombro a medida que   
					su niño crece y muévalas a   
					la posición siguiente cuando   
					sea necesario.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					21   
				6.2 Asegurar el asiento para   
					automóvil en su vehículo   
					NO AJUSTAR DEBIDAMENTE EL ASIENTO PARA   
					AUTOMÓVIL EN EL VEHÍCULO AUMENTA EL   
					RIESGO DE LESIONES SERIAS O LA MUERTE   
					EN UNA CURVA CERRADA, PARADA REPENTINA   
					O ACCIDENTE.   
					Cumpla detenidamente estas instrucciones y las del   
					manual del propietario de su vehículo para asegurarse   
					que el asiento para automóvil esté debidamente   
					ubicado, colocado y asegurado apretadamente en   
					todo momento.   
					6.2.1 Con el cinturón del vehículo de   
					regazo me o de regazo/hombro   
					Guardar el LATCH. Ver la Sección 8.2, Cómo guardar el   
					LATCH, página 32.   
					1. Coloque el asiento para automóvil firmemente   
					contra el respaldo del asiento del vehículo mirando   
					hacia adelante.   
					2. Pase el cinturón de seguridad:   
					Para el cinturón   
					deregazo/hombro   
					Para el cinturón   
					de regavo solamente   
					3. Trabe el cinturón de vehículo.   
					El cinturón del vehículo no deberá   
					estar doblado ni dado vuelta.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					22   
				4. Ajuste el cinturón de seguridad del vehículo   
					Ê 
					Empuje con fuerza hacia   
					abajo con la rodilla o la   
					mano libre en el medio   
					del asiento para automóvil   
					Ê. Luego tire y ajuste el   
					cinturón del vehículo.   
					Para obtener más   
					información sobre cómo   
					ajustar el cinturón de su   
					sistema del cinturón de   
					seguridad, vea la Sección 5.2, Requisitos del   
					cinturón de seguridad del vehículo, páginas 12 a   
					16, o el manual del propietario de su vehículo.   
					5. Si desea usar la soga para mantener el asiento   
					en su lugar, asegúrela ahora mismo. Vea la   
					Sección 8.1 Uso de la soga, página 31.   
					Cuando no se usa el anclaje, engánchelo en la   
					barra de almacenamiento del anclaje ubicada   
					atrás del asiento para automóvil.   
					6. Verificación de seguridad para una   
					instalación segura   
					Realice esta prueba cada   
					vez que viaja con su niño.   
					Gire y tire el asiento para   
					Ë 
					automóvil de adelante   
					hacia atrás y desde la   
					izquierda a la derecha   
					para verificar que el   
					asiento está asegurado Ë.   
					El cinturón del vehículo   
					debe permanecer   
					apretado. El asiento para   
					automóvil debe estar   
					asegurado muy apretadamente.   
					Si el asiento para automóvil no está asegurado o   
					flojo, repita el procedimiento O busque otro lugar   
					para el asiento, vea la Sección 5.0 Ubicación del   
					asiento para automóvil, páginas 11 a 17.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					23   
				6.2.2 Con LATCH   
					1. Para facilitar la   
					instalación, extienda el   
					LATCH hasta el máximo.   
					2. Coloque el asiento para   
					automóvil firmemente   
					contra el respaldo del   
					asiento del vehículo   
					Ê 
					mirando hacia adelante.   
					3. Pase el LATCH por el   
					recorrido del cinturón   
					que normalmente se   
					usa para el cinturón del   
					asiento del vehículo Ê.   
					El cinturón debe   
					mantenerse en posición   
					plana sin torcerse.   
					Ë 
					4. Enganche los   
					conectores a los   
					sujetadores inferiores.   
					Tire firmemente de los   
					conectores para   
					asegurarse que estén   
					enganchados Ë.   
					Ì 
					5. Ajuste el LATCH   
					empujando el asiento   
					para automóvil con fuerza   
					hacia abajo y tirando el   
					Ì 
					cinturón de ajuste   
					. 
					6. NUNCA ponga dos   
					conectores LATCH   
					en un vehículo con   
					sujetador LATCH a   
					Í 
					menos que el fabricante   
					lo haya permitido   
					Í 
					específicamente   
					. 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					24   
				7. Todas las posiciones del   
					asiento LATCH tienen   
					puntos de anclaje.   
					Asegure la parte de arriba   
					del asiento usando la correa   
					la soga. Vea la Sección 8.1   
					Uso de la soga página 31.   
					Cuando no se usa el   
					anclaje, engánchelo en la   
					barra de almacenamiento   
					del anclaje ubicada atrás   
					del asiento para automóvil.   
					8. Verificación de   
					seguridad para una   
					instalación segura   
					Realice esta prueba   
					cada vez que viaja con   
					su niño.   
					Î 
					Gire y tire el asiento para   
					automóvil de adelante   
					hacia atrás y desde la   
					izquierda a la derecha   
					para verificar que el   
					asiento está asegurado Î.   
					El cinturón del LATCH   
					debe permanecer   
					apretado. El asiento   
					para automóvil debe   
					estar asegurado muy   
					apretadamente.   
					Si el asiento para automóvil   
					no está asegurado o flojo,   
					repita el procedimiento O   
					busque otro lugar para el   
					asiento, vea la Sección 5.0   
					Ubicación del asiento para   
					automóvil, páginas 11 a 17.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					25   
				6.3 Asegurar a su niño en el   
					asiento del automóvil   
					NO AJUSTAR DEBIDAMENTE A SU NIÑO EN EL   
					ASIENTO PARA AUTOMÓVIL AUMENTA EL RIESGO   
					DE LESIONES SERIAS O LA MUERTE EN UNA   
					CURVA CERRADA, PARADA REPENTINA O   
					ACCIDENTE.   
					En un accidente, el asiento para automóvil NO   
					ofrece protección a su niño a menos que las   
					correas del arnés estén debidamente aseguradas.   
					Cumpla estas instrucciones detenidamente para   
					asegurar debidamente a su niño.   
					• AJUSTE EL SISTEMA DEL ARNÉS   
					APRETADAMENTE CADA VEZ que coloca   
					a su niño en el asiento para automóvil.   
					• Evite usar ropas abultadas.   
					1. Coloque al niño en el   
					asiento para automóvil   
					con la espalda del niño   
					plana contra el respaldo   
					Ê 
					del asiento para automóvil.   
					2. Pase las correas del   
					arnés sobre los hombros   
					del niño e inserte las   
					lengüetas en la hebilla Ê.   
					VERIFIQUE que las   
					correas no estén dobladas.   
					VERIFIQUE que el   
					arnés esté debidamente   
					apretado tirando de   
					las correas.   
					NO use el asiento para   
					automóvil si el arnés no   
					se traba.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					26   
				3. Tire de la correa de   
					ajustes para apretar el   
					arnés Ë.   
					Ë 
					4. Asegure la traba del   
					arnés Ì. Coloque la   
					traba del arnés en el   
					Ì 
					Í 
					medio del pecho del niño,   
					nivelado con las axilas.   
					5. Asegúrese que las   
					correas estén planas   
					y ajustadas contra los   
					hombros del niño.   
					No deberá poder insertar   
					más que un dedo entre   
					el arnés y el hombro   
					del niño Í.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					27   
				7.0 Uso del asinento para   
					automóviles sin arnés   
					incorporado   
					NO AJUSTAR DEBIDAMENTE   
					A SU NIÑO Y LA ASIENTO   
					PARA NIÑOS EN EL VEHÍCULO   
					AUMENTA EL RIESGO DE   
					LESIONES SERIAS O LA   
					MUERTE EN UNA CURVA   
					CERRADA, PARADA   
					Ê 
					Ë 
					REPENTINA O ACCIDENTE.   
					Debe usar siempre el cinturón   
					de regazo/hombro del vehículo   
					para asegurar su niño y el   
					asiento. El LATCH no asegurará   
					su niño al asiento para automóvil.   
					Use solamente el sistema de   
					cinturón para el hombro y de   
					regazo del vehículo cuando   
					sujeta a su niño en la asiento   
					para niños Ê.   
					NUNCA use un cinturón del   
					vehículo de regazo solamente a   
					través del frente de su niño Ë.   
					Los cinturones del vehículo   
					DEBEN estar planos contra el   
					niño y no DEBEN estar doblados.   
					NO use el cinturón del hombro   
					flojo o puesto debajo del brazo Ì.   
					La parte de regazo del cinturón   
					de regazo/hombro DEBE estar   
					bajo y apretado en la cadera,   
					apenas tocando los muslos.   
					Ì 
					Í 
					NO deje que su niño salga por   
					abajo de asiento para niños Í.   
					Si el niño no puede mantener el sistema de seguridad   
					del vehículo debidamente colocado, NO use esta   
					asiento para niños. Use un sistema de seguridad   
					diferente para el niño.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					28   
				7.1 Eliminación del arnés   
					1. Quite las correas de la   
					placa de unión metálica.   
					Vea la figura 5 en la   
					Î 
					página 19 para más ayuda.   
					Tire de las correas por las   
					ranuras del arnés. No quite   
					las hebillas ni el gancho del   
					arnés de las correas   
					. 
					Î 
					Empuje las correas, las   
					hebillas y el gancho del arnés   
					por el fondo del asiento.   
					2. Saque la correa para la   
					entrepierna. Vea la figura 3   
					en la página 19 para obtener   
					más ayuda.   
					Ï 
					Abroche la correa de la   
					entrepierna al arnés y   
					conecte el gancho del arnés   
					para su almacenaje.   
					3. La placa de unión metálica   
					y la correa no se pueden   
					quitar. Oprima el botón rojo   
					de ajustes y tire de la correa   
					hacia la parte trasera del   
					Ð 
					asiento . Encaje la placa de   
					Ï 
					unión en la parte trasera del   
					asiento   
					. 
					Ð 
					4. Guardar el LATCH. Ver la   
					Sección 8.2, Cómo guardar el   
					LATCH, página 32.   
					5. Invierta las instrucciones   
					para volver a instalarlas.   
					Vea la figura 1 en la página   
					38 para obtener la vía   
					correcta del arnés.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					29   
				7.2 Asegurar al niño y la asiento   
					para niños en el vehículo   
					1. Coloque el asiento para automóvil mirando hacia   
					adelante y firmemente contra el respaldo del   
					asiento del vehículo equipado solamente con un   
					cinturón para el hombro y de regazo.   
					2. Si desea usar la correa de la soga para   
					mantener el asiento en su lugar, asegúrela   
					ahora mismo. Vea la Sección 8.1 Uso de la   
					soga, página 31.   
					3. Coloque al niño en el asiento para automóvil con   
					la espalda del niño plana contra el respaldo del   
					asiento para automóvil.   
					Ê 
					4. Coloque el cinturón para   
					de regazo/hombro como   
					se indica en Ê. Ajuste la   
					hebilla y tire hacia arriba   
					del cinturón para el hombro   
					para ajustarlo.   
					5. Si el cinturón pasa a través   
					del cuello, cabeza o cara   
					del niño, vuelva a colocar   
					el cinturón a través del pecho,   
					usando el colocador del   
					cinturón para el hombro.   
					Ë 
					Pase la correa del   
					hombro del vehículo a   
					través de uno de los   
					tres posicionadores   
					exactamente como   
					se indica Ë.   
					6. Verifique que el cinturón   
					para el hombro esté   
					debidamente colocado   
					sobre el hombro y   
					apretadamente sobre el niño.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					30   
				8.0 Información adicional   
					8.1 Uso de la soga   
					Todas las posiciones del asiento LATCH tienen puntos   
					de anclaje.Si desea usar la soga, consulte el manual   
					del propietario de su vehículo para determinar los   
					lugares. Si su vehículo no está equipado con un   
					sujetador de soga, podría ser posible instalar uno.   
					Contacte al concesionario de su vehículo para   
					determinar el lugar correcto del sujetador y su   
					instalación. Puede comprar un juego de piezas   
					para sujetar la soja llamando al Servicio al Cliente de   
					Graco al 1-888-224-6549.   
					1. Verifique que la soga esté   
					Ì 
					apretadamente sujetada   
					al asiento para automóvil.   
					2. Sujete la traba de la soga   
					al punto de agarre Ì.   
					3. Ajuste la correa de la   
					soga apretadamente Í.   
					4. Verifique que el asiento   
					Í 
					esté apretado después   
					de instalar la soga. De   
					ser necesario, vuelva a   
					sujetar el cinturón de   
					seguridad del vehículo   
					cuando lo usa con   
					el arnés.   
					5. Para aflojarlo, levante   
					Î 
					la lengüeta de metal de   
					la hebilla Î.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					31   
				8.2 Almacenamiento del LATCH   
					1. Para facilitar el   
					almacenamiento,   
					extienda el LATCH   
					hasta el máximo.   
					2. Ubique las barras de   
					almacenamiento en la   
					parte de atrás del asiento   
					Ê 
					para automóvil Ê.   
					Barras de   
					almacenamiento   
					3. Ajuste los extremos de   
					LATCH en las barras de   
					almacenamiento como   
					se indica.   
					4. Después de ajustarlo   
					sobre la barra de   
					almacenamiento, tire   
					el cinturón de ajuste   
					para asegurarse que   
					el LATCH esté   
					debidamente ajustado.   
					5. El almacenamiento del   
					LATCH debería tener   
					este aspecto cuando   
					Ê 
					esté terminado   
					. 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					32   
				8.3 Uso en aeronaves   
					Este sistema de seguridad ha sido certificado para ser   
					usado en vehículos automotor. Ha sido certificado para   
					uso en aeronaves SOLAMENTE cuando se lo usa con   
					el arnés incorporado. Cuando se lo usa como asiento   
					para niños sin el arnés, este sistema NO ha sido   
					certificado para ser usado en aeronaves porque no hay   
					cinturón del hombro disponible.   
					Puntos importantes que recordar:   
					1. Las aerolíneas tienen ciertas restricciones sobre   
					el uso de los asientos para automóviles.   
					2. Instale el asiento para automóvil en un aeronave   
					de la misma manera en que se instala en un   
					automóvil con un cinturón de regazo (ver la   
					Sección 6.2.1, Cómo asegurar el asiento para   
					automóvil en su vehículo, páginas 22 y 23).   
					3. Verifique que el cinturón del asiento de la aeronave   
					sujeta seguramente al asiento para automóvil en   
					todo momento.   
					8.4 Accesorios   
					(ciertos modelos)   
					1. Inserte las dos clavijas   
					del apoya vasos en las   
					dos ranuras del costado   
					izquierdo o derecho del   
					asiento Ë.   
					Ë 
					Ì 
					2. Empuje el apoya vasos   
					hacia abajo hasta que   
					la traba se asegure al   
					fondo del asiento Ì.   
					VERIFIQUE que el apoya   
					vasos esté seguro tirando   
					del mismo.   
					Traba   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					33   
				8.5 Uso del pie de reclinación   
					(en ciertos modelos)   
					Algunos modelos vienen con un pie de reclinación en   
					el fondo del asiento.   
					1. Para usar el asiento   
					reclinado: mueva el pie   
					hacia la parte delantera   
					del asiento Ê.   
					Ê 
					2. Para guardarlo: mueva el   
					pie hacia la parte trasera   
					del asiento Ê   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					34   
				9.0 Cuidado y   
					mantenimiento   
					• USO CONTINUO DEL ASIENTO PARA   
					AUTOMÓVIL PODRÍA CAUSAR DAÑO AL   
					ASIENTO DEL VEHÍCULO. Use una estera para   
					asiento del automóvil, toalla o frazada fina para   
					proteger el tapizado.   
					• PIEZAS DE METAL Y DE PLÁSTICO: limpiar con   
					un jabón suave y agua fresca. No use cloro ni   
					detergentes.   
					• CORREAS DEL ARNÉS Y CORREAS DEL LATCH:   
					limpie el lugar sucio. No sumerja las correas en   
					agua. Hacerlo podría aflojar las correas.   
					• AJUSTADOR DE LA HEBILLA Y EL ARNÉS:   
					limpiar con un trapo húmedo.   
					• NUNCA LUBRIQUE LA HEBILLA. Si la hebilla o   
					el ajustador del arnés se pega o no se mantiene   
					apretado, verifique que no haya ningún objeto   
					extraño tal como comida, suciedad, etc. Saque los   
					objetos con pinzas y/o límpielas con una escobilla   
					de algodón. Si no puede lograr que el arnés se   
					mantenga apretado con la hebilla trabada con   
					seguridad, no use este asiento para automóvil.   
					Llame Graco al 1-888-224-6549 para comprar   
					un arnés o hebilla de repuesto.   
					• FUNDA DEL ASIENTO: limpiar con una esponja   
					húmeda usando un jabón suave y agua fresca.   
					De ser necesario, se puede sacar la funda para   
					limpiarla (ver la página siguiente).   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					35   
				Para sacar la funda del asiento   
					1. Quite las correas del   
					arnés y de la entrepierna   
					(Vea la Sección 7.1,   
					Ê 
					Eliminación del   
					arnés, pagina 29,   
					para ayuda).   
					2. Quite los bucles   
					elásticos y los   
					ganchos del   
					asiento como   
					se indica Ê.   
					Ë 
					Ì 
					3. Debajo de la parte   
					delantera del asiento,   
					oprima la lengüeta para   
					quitar la placa del botón   
					de ajustes   
					. 
					Ë 
					4. Ponga la placa de ajustes   
					de lado y pásela por el   
					agujero en la funda del   
					asiento . La apertura   
					Ì 
					es muy estrecha, así que   
					asegúrese de no romper   
					la funda.   
					5. Quite la funda del asiento,   
					pasando las correas del   
					arnés, la de la entrepierna   
					y los herrajes por las   
					ranuras en la funda.   
					NO USE el asiento de   
					seguridad infantil sin la   
					funda del asiento.   
					6. Lave la funda a máquina   
					en agua fría en el ciclo   
					delicado y déjelo secar al   
					aire. NO USE CLORO.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					36   
				Para colocar la funda de nuevo   
					1. Para colocar la funda   
					de nuevo, siga los pasos   
					anteriores en orden   
					inverso. Empuje la placa   
					de ajustes y la correa por   
					el agujero en la funda.   
					Asegúrese de no   
					romper la funda.   
					Í 
					2. Inserte las dos   
					lengüetas de la placa   
					de ajustes en la parte   
					trasera del agujero   
					del asiento   
					. 
					Í 
					Î 
					Ï 
					3. Empuje la tela hacia arriba   
					para que la lengüeta   
					debajo de la placa de   
					ajustes quede debajo de   
					la tela . Encaje la placa   
					Î 
					de ajustes de nuevo en   
					el asiento . Asegúrese   
					Ï 
					que la placa de ajustes   
					esté bien sujeta al asiento   
					y que la correa se deslice   
					libremente cuando se   
					apriete el botón.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					37   
				4. Pase las correas de   
					arnés por los agujeros   
					apropiados en la   
					funda del asiento.   
					Vea la ilustración a   
					la derecha y en la   
					sección 6.1,   
					Ê 
					"Colocación de las   
					correas del arnés"   
					(página 18) para   
					volver a colocar las   
					correas del arnés   
					en el asiento   
					correctamente   
					. 
					Ê 
					5. Sujete la funda al   
					asiento volviendo a   
					colocar los bucles   
					elásticos y los ganchos   
					en el asiento.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					38   
				Notas   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					39   
				10.0 Piezas de repuesto   
					Cómo hacer pedidos:   
					Complete el formulario que sigue. El número de   
					modelo de su asiento para automóvil DEBEN incluirse   
					en el formulario para asegurarse que recibirá las   
					piezas de repuesto correctas. El número del modelo   
					puede encontrarse en una etiqueta ubicado abajo de   
					su asiento para automóvil. Debe incluir el pago con   
					su pedido.   
					También se pueden solicitar las piezas del sitio web de   
					
					Lista de piezas: . . . . . . . . . . . .Precio:*   
					Traba de seguridad . . . . . . . . . . . . . . . . . . . . . .$5.00   
					Arnés con hebilla y traba del arnés . . . . . . . . . .$15.00   
					Funda del asiento . . . . . . . . . . . . . . . . . . . . . . .$35.00   
					Correa para la entrepierna y retén de metal . . . .$8.00   
					Correa de la soga . . . . . . . . . . . . . . . . . . . . . . .$10.00   
					Traba del arnés de 2 piezas . . . . . . . . . . . . . . . .$5.00   
					Apoya vasos . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.00   
					Sostenedor malla . . . . . . . . . . . . . . . . . . . . . . . .$7.00   
					LATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$20.00   
					*Los precios están sujetos a cambio sin previo aviso   
					SI NECESITA AYUDA   
					Si tuviera alguna pregunta o necesita piezas que no   
					están listadas, por favor llame gratis al:   
					1-888-224-6549   
					o visite nuestro sitio web en Internet,   
					
					Devuelva el formulario con su pago a:   
					GRACO CHILDREN’S PRODUCTS INC.   
					CUSTOMER SERVICE DEPARTMENT   
					P.O. BOX 100, MAIN STREET   
					ELVERSON, PA 19520   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					40   
				Model No. • N° de modelo   
					( Number Required/Se requieren número)   
					Total • Total:   
					Locking clip/   
					Traba de seguridad   
					Shipping & handling*:   
					Gastos de envío*:   
					$5.00   
					Harness strap with buckle   
					tongues and harness clip/   
					Arnés con hebilla y traba   
					del arnés   
					Sales tax**:   
					Impuestos**:   
					Total due   
					Total a pagar:   
					*$15.00 outside the continental U.S.   
					*US$ 15,00 para fuera del continente   
					de EE.UU   
					Seat cover/   
					Funda del asiento   
					**CA 7.25%, IL 6.25%, IN 5%, NY   
					8.25%, OH 5.75%, PA 6%, SC 5%   
					Crotch strap w/buckle/   
					Correa para la entrepierna   
					Tether strap/Correa de la soga   
					Harness Clip/Traba del arnés   
					Cupholder/Apoya vasos   
					Mesh holder/Sostenedor   
					LATCH   
					Check or money order enclosed   
					(payable to Graco Children’s Products Inc.)   
					Cheque o giro adjunto   
					(a nombre de Graco Children's Products Inc.)   
					Charge to credit card • Cargar a la tarjeta de crédito   
					Visa   
					MasterCard   
					Discover   
					Account #: • Cuenta N°   
					Exp. date • Fecha de vencimiento   
					Signature • Firma   
					Ship to • Enviar a   
					Name • Nombre   
					Address • Dirección   
					City, State, Zip • Ciudad, Estado, Código postal   
					Telephone • Telefóno   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					41   
				 |