Graco Automobile Parts 308169J User Manual

Instructions – Parts List  
Air Filters, Lubricators,  
and Kits  
308169J  
Maximum Temperature Range: 40–150_F (4–65_C)  
Important Safety Instructions.  
Read all warnings and instructions in this manual.  
Save these instructions.  
Air Filters  
Air Lubricators  
106148  
106149  
106150  
112859  
214847  
214848  
214849  
217074  
110148  
110146  
237212  
Integral Filter–Regulators  
Air Filter–Regulators–Lubricators  
15C955  
246947  
246948  
110150  
217072  
217073  
246946  
110149  
Mascott Equipment Co  
PortlandSeattlePasco  
(800) 452-5019 (800) 481-7311 (888) 450-7867  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Model 110149  
Model 110150  
217072  
LUBRICATOR  
ADJUSTMENT  
KNOB  
217073  
LUBRICATOR  
ADJUSTMENT  
KNOB  
LUBRICA-  
TOR  
SIGHT  
GLASS  
(NOT VISIBLE FROM  
THIS VIEW)  
AIR REGULATOR  
AIR REGULATOR  
AIR FILTER DRAIN  
AIR FILTER DRAIN  
Before installing any air line components, blow out the  
pipe line to remove scale and other debris. Use pipe com-  
pound or tape sparingly and only on male threads.  
Air Filter  
Clean the air filter regularly to maximize filtering efficien-  
cy and to avoid excessive pressure drop. Drain contami-  
nants from the bowl before it reaches the baffle level.  
Open the drain to drain the bowl or fully relieve pressure  
and remove the bowl. Use household soap and water or  
denatured alcohol for cleaning. Use compressed air to  
blow out the filter body. Wash the filter element and blow  
it out from the inside. Clean the sight glass thoroughly. Do  
not leave solvent residue in the sight glass, which may at-  
tack or weaken it. If the sight glass appears damaged by  
the solvent, replace it immediately.  
Install the components in the pipe line so the flow is in the  
direction of the arrow stamped on the body.  
Locate the air line component(s) as close as possible to  
the equipment it serves.  
Install the air filter upstream from the regulator and/or lu-  
bricator.  
To provide the user with a variety of assembly options, a  
bleed–type master air valve is not included with FRL’s.  
See Accessories on page 15 to order this valve. Another  
bleed–type master air valve can be installed upstream  
from the FRL to isolate it for servicing.  
An automatic drain accessory, Part No. 106151, is avail-  
able for most filters, except Model 110146. To install the  
drain, fully relieve system pressure, remove the o–ring  
and bowl. Remove the drain from the bowl and insert the  
automatic drain in its place. Reassemble.  
WARNING  
Skin Injection Hazard  
Regulator  
To reduce the risk of serious bodily  
injury, including skin injection, splashing  
fluid in the eyes or on the skin, or injury  
from the pump starting unexpectedly, be  
sure your system includes a  
The regulator reduces the air supply pressure to a speci-  
fied, constant downstream pressure to maximize equip-  
ment performance. Preset pressures can be locked in.  
See manual 308167 or 308168 (supplied with the FRL’s)  
for complete air regulator information.  
bleed–type master air valve.Install the  
air valve between the FRL outlet and the  
device the FRL is serving. When  
relieving system air pressure, close the  
bleed–type master air valve to fully  
relieve air pressure.  
Lubricator  
The lubricator meters oil into the moving air stream to lu-  
bricate air-operated motors. A manual adjustment in the  
housing sets the oil drip rate into the air stream, which  
can be monitored through a sight glass on most lubrica-  
tors. One to two drops of oil a minute is a common adjust-  
ment. Use Graco motor oil, part no. 202659. All lubrica-  
tors, except Model 110148, can be refilled with the  
system pressurized. However, ALWAYS relieve the sys-  
tem pressure before removing the bowl for any reason.  
Mounting Air Accessories  
Use a bracket to mount the air accessories to a wall or  
cart. Do not hang the accessories directly off the air mo-  
tor inlet, which could be damaged from the weight and  
operating stress.  
308169  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Repair Kits  
WARNING  
Lubricator Repair Kits  
Relieve air and fluid pressure  
before servicing the regulator, filter or  
lubricator.  
For  
Lubricator  
Kit No.  
Description  
214847  
214848  
214849  
102774  
Repair Kit  
To reduce the risk of serious bodily inju-  
ry, fluid injection, splashing in the eyes  
or skin, injury from moving parts, AL-  
WAYS open the bleed–type master air  
valve (required) to relieve system air  
pressure and trigger the gun or dis-  
pense valve and open any fluid drain  
valves to relieve fluid pressure.  
Lubricator 214847, 214848, 214849, 237212  
ADJUSTABLE CAP  
VALVE NEEDLE ASSY.  
VALVE SEAT  
FILLER PLUG  
1. Disassemble the component. Refer to the illustra-  
tions on pages 4 and 5.  
KIT 102774  
2. Use household soap and water or denatured  
alcohol for cleaning. Wipe the parts clean with a  
clean, soft, dry rag. Use compressed air to blow  
dirt and contaminants out of the lubricator or filter  
body.  
BOWL  
(see chart)  
3. Inspect all parts for wear or damage. Replace  
damaged parts. Use all parts supplied with the kit.  
NOTE: The chart identifies the available repair kits for the  
air filters and lubricators covered in this manual. The cut-  
away drawings shown on pages 5 and 6 show the con-  
tents of the kits.  
0940  
4
308169  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Air Filter 110146  
Filter Elements & Bowl Seals  
For  
Filter  
Kit No. Description  
Bowl Seal  
Part No.  
106149  
106150  
112859  
110146  
108035 1/2 in., 20 micron filter element 162440  
106204 3/4 in., 40 micron filter element 104023  
FILTER  
ELEMENT  
–––––  
1 in., 40 micron filter element  
–––––  
GASKET  
BOWL  
111690 1/4 in., 20 micron filter element N/A  
BOWL  
KIT  
Sight Glass Kits  
For  
Filter  
Kit No. Description  
DRAIN  
0939  
106148  
106149  
106150  
112859  
217074  
104991 3/8 in. sight glass  
104992 1/2 in. sight glass  
104993 3/4 in. sight glass  
104993 1/2 in. sight glass  
106197 1/2 in. sight glass  
Air Filter 106148, 106149, 106150, 112859,  
217074  
BOWL SEAL  
SIGHT GLASS KIT  
104991, 104992,  
104993, 106197  
FILTER  
ELEMENT  
INDICATOR  
FLOAT  
O-RING  
SIGHT  
GLASS  
BOWL SEAL KIT  
106202,106204,  
106205, 106206,  
108034, 108035  
O-RING  
PLUG  
0938  
308169  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Filter Bowl Replacement Kits with Seal  
Regulator Repair Kit  
For  
Kit No.  
116672  
116672  
248085  
Description  
For  
Kit No.  
116634  
116634  
248086  
Description  
Filter  
Filter  
116521  
15C955  
15C956  
3/4 in. port, bowl  
w/sight glass  
116521  
15C955  
15C956  
3/4 in. valve and  
diaphragm  
1/2 in. port, bowl  
w/sight glass  
1/2 in. valve and  
diaphragm  
1/4 in. port, bowl  
w/sight glass  
1/4 in. valve and  
diaphragm  
Filter Element Kit with Gasket  
For  
Kit No.  
116635  
116635  
248087  
Description  
Filter  
116521  
15C955  
15C956  
3/4 in. 40 micron  
filter element  
1/2 in. 40 micron  
filter element  
1/4 in. 40 micron  
filter element  
6
308169  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts  
3/8 npt(f)  
OUTLET  
1/4 npt(f)  
OUTLET  
2
4
1/4 npt(f)  
INLET  
3/8 npt(f)  
INLET  
3
3
1
0926  
4
2
5
1
Model 110149, Series A  
Includes items 1–5  
Ref  
No. Part No.  
Description  
FILTER  
REGULATOR (see 308167)  
LUBRICATOR  
MOUNTING BRACKET  
1/8 in. GAUGE  
Qty  
Model 110150, Series B  
Includes items 1–5  
1
2
3
4
5
110146  
110318  
110148  
110321  
110319  
1
1
1
1
1
Ref  
No. Part No.  
Description  
Qty  
1
2
3
4
106148  
110234  
214847  
101689  
FILTER  
1
1
1
1
REGULATOR (see 308167)  
LUBRICATOR  
1/4 in. GAUGE  
308169  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Parts  
4
4
3/4 npt(f)  
OUTLET  
1/2 npt(f)  
OUTLET  
3/4 npt(f)  
INLET  
1/2 npt(f)  
INLET  
3
5
5
0926  
2
2
0926  
1
3
1
Model 217072, Series A  
Includes items 1–5  
Model 217073, Series A  
Includes items 1–5  
Ref  
No. Part No.  
Description  
Qty  
1
2
3
4
5
106149  
104266  
214848  
106145  
101689  
FILTER  
REGULATOR (see 308167)  
LUBRICATOR  
MOUNTING BRACKET  
GAUGE  
1
1
1
2
1
Ref  
No. Part No.  
Description  
Qty  
1
2
3
4
5
106150  
207755  
214849  
106145  
101689  
FILTER  
REGULATOR (see 308167)  
LUBRICATOR  
MOUNTING BRACKET  
GAUGE  
1
1
1
2
1
8
308169  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts  
2
2
1
1
Model 15C955, 246947, and 246948  
Ref  
Model 246946  
No. Part No.  
Description  
Qty  
Ref  
1
15C955  
116521  
C36260  
REGULATOR, filter, air 1/2 npt  
Model 246947  
REGULATOR, filter, air 3/4 npt  
Model 246948  
GAUGE, pressure, air  
Models 246947 and 246948 only  
1
1
1
No. Part No.  
Description  
Qty  
1
2
15C956  
C36260  
REGULATOR, filter, air; 1/4 npt  
GAUGE, pressure, air 1  
1
2
308169  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions  
Air Filter  
Lubricators  
Model  
No.  
Inlet/  
Width (A) Height (B) Height (C)  
Model  
No.  
Inlet/  
Width (A) Height (B) Height (C)  
Outlet in. (mm)  
1/4 npt 1.5 (39)  
3/8 npt 2.5 (64)  
1/2 npt 3.3 (83)  
3/4 npt 4.0 (103)  
in. (mm)  
5.0 (126)  
7.2 (182)  
7.9 (201)  
9.9 (251)  
9.9 (251)  
in. (mm)  
Outlet in. (mm)  
1/4 npt 1.6 (40)  
3/8 npt 2.5 (64)  
1/2 npt 3.3 (83)  
1/2 npt 3.0 (76)  
3/4 npt 4.0 (102)  
in. (mm)  
4.0 (102)  
6.0 (143)  
6.8 (174 )  
7.5 (191)  
8.8 (222)  
8.8 (222)  
in. (mm)  
110148  
214847  
214848  
214849  
237212  
3.0 (76)  
110146  
106148  
106149  
217074  
106150  
112859  
3.6 (91)  
4.8 (122)  
5.6 (142)  
7.3 (184)  
7.3 (184)  
3.1 (79)  
6.3 (159)  
6.6 (168)  
7.8 (198)  
7.9 (201)  
1 npt  
4.0 (103)  
1 npt  
4.5 (114)  
Model 214847  
Model 217074  
Model 106148  
106149  
214848  
214849  
237212  
A
106150  
112859  
A
Model 110146  
A
Model 110148  
A
A
B
C
B
C
B
B
B
C
C
C
0929  
0930  
0932  
0934  
0935  
Integral Filter–Regulators  
Model  
No.  
Inlet/  
Width (A) Height (B) Height (C)  
Outlet in. (mm)  
in. (mm)  
in. (mm)  
246946  
246947  
246948  
1/4 npt 2–3/8  
(60.32)  
9.563  
(242.87)  
4.938  
(125.41)  
1/2 npt 3.375  
(85.73)  
11.375  
(288.93)  
6.5 (165)  
3/4 npt 3.375  
(85.73)  
11.375  
(288.93)  
6.5 (165)  
A
A
B
B
C
C
TI3969  
TI3970  
Models 15C955,  
246947, 246948  
Model 246946  
10  
308169  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions  
Filter–Regulator–Lubricators  
Model  
No.  
Inlet/  
Width (A)  
in. (mm)  
Height (B) Height (C) Depth (D)  
Outlet  
in. (mm)  
5.1 (130)  
9.6 (244)  
in. (mm)  
3.5 (89)  
5.4 (137)  
in. (mm)  
110149  
110150  
217072  
217073  
1/4 npt  
3/8 npt  
1/2 npt  
3/4 npt  
5.1 (130)  
8.8 (222)  
8.1 (206)  
15.8 (400)  
1.6 (40)  
4.1 (105)  
4.0 (105)  
5.0 (127)  
10.4 (263) 5.8 (146)  
13 (330)  
7.8 (197)  
Models 110150, 217072, 217073  
A
Model 110149  
D
A
D
B
B
C
C
0926  
0924  
308169  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Air Filter Flow Curves  
Inlet Pressure  
Model 106148  
Inlet Pressure  
Model 110146  
5
4
3
2
1
5
4
3
2
1
0
0
0
0
10  
20  
30  
40  
50  
5
10  
15  
20  
25  
Air Flow (SCFM)  
Air Flow (SCFM)  
Model 106149  
Inlet Pressure  
Model 217074  
Inlet Pressure  
5
4
3
2
1
0
5
4
3
2
1
0
0
0
10 20 30 40 50 60 70 80 90 100 110  
20  
40  
60  
80  
100  
120  
Air Flow (SCFM)  
Air Flow (SCFM)  
Model 106150  
Inlet Pressure  
Model 110148  
Inlet Pressure  
5
4
3
2
1
0
5
4
3
2
1
0
0
0
40  
80  
120  
160  
200  
240  
280  
10  
20  
30  
40  
50  
60  
Air Flow (SCFM)  
Air Flow (SCFM)  
12  
308169  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Air Filter Flow Curves  
Model 112859  
Inlet Pressure  
6
25  
100  
5
4
3
2
1
0
PSIG  
PSIG  
0
40 80 120 160 200 240 280 320 360 400  
Air Flow (SCFM)  
Models 246947 and 246948  
Model 246946  
Air Flow (SCFM)  
Standard 40 Micron Element  
Supply Pressure 100 psig  
80  
3/4”& 1”  
1/2”  
20  
40  
60  
80  
100  
3/8”  
60  
100  
80  
60  
40  
20  
1/4”  
3/4”& 1”  
1/2”  
40  
3/8”  
1/4”  
1/2”  
20  
3/4”& 1”  
3/8”  
1/4”  
0
–02  
–03  
50  
100  
150  
200  
250  
0
Air Flow (SCFM)  
–04  
308169  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
14  
308169  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
Gauges  
Style 1 (Bottom Inlet)  
Model  
Air Pressure  
Range  
Inlet  
Type of Dial Dia.  
Case  
Style Glass  
P/N  
160430  
101689  
101180  
101689  
0–100 psi (7 bar)  
0–200 psi (14 bar)  
0–200 psi (14 bar)  
0–200 psi (14 bar)  
1/4 npt Black  
1/4 npt Black  
2 in. (51 mm)  
2 in. (51 mm)  
1
1
1
2
102019  
102019  
102019  
102019  
1/4 npt Chrome 2 in. (51 mm)  
1/4 npt Chrome 2 in. (51 mm)  
Style 2 (Back Inlet)  
Bleed Type Master Air Valve  
Part No.  
107141  
107142  
110223  
110224  
110225  
110226  
Description  
3/4 npt (m x f)  
1/2 in. npt (m x f)  
1/4–18 npt (fbe)  
3/8–18 npt (fbe)  
1/2–14 npt (fbe)  
3/4–14 npt (fbe)  
106151 AUTOMATIC DRAIN  
Installs in place of standard drain  
for automatic drain. For all mod-  
els except 110146.  
202659 AIR MOTOR OIL  
For use in lubricators.  
114598 MOUNTING BRACKET  
Includes two brackets and is  
used for 1 in. pipe.  
308169  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Graco Standard Warranty  
Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the  
date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco,  
Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be  
defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written  
recommendations.  
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by  
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or sub-  
stitution of non–Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of  
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture,  
installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.  
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for  
verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The  
equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect  
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and  
transportation.  
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT  
NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.  
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other  
remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any  
other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the  
date of sale.  
Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection  
with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured  
by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide  
purchaser with reasonable assistance in making any claim for breach of these warranties.  
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment  
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract,  
breach of warranty, the negligence of Graco, or otherwise.  
FOR GRACO CANADA CUSTOMERS  
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings  
entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnais-  
sent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires  
exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.  
16  
308169  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Baby Carrier ISPC019CB User Manual
Guardian Technologies Telephone HR71 User Manual
Hamilton Beach Slow Cooker 840059300 User Manual
Hans Grohe Plumbing Product 28570003 User Manual
Honeywell Water Dispenser F 76 S F User Manual
HP Hewlett Packard Network Router B User Manual
Hunter Fan Outdoor Ceiling Fan 23898 User Manual
Husqvarna Saw TS 355 User Manual
Husqvarna Tiller 96093000901 User Manual
Ikelite Camera Accessories 410351TTL User Manual