SCN300W User Guide
Schooners
Weatherproof Wireless Speakers
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
This stereo wireless speaker system applies the latest 900Mhz wireless technology
that enables you to enjoy music and TV sound anywhere inside or outside your
home. You can simply connect the transmitter with any audio source such as
iPod, TV, DVD, HiFi and CD/MP3 player.
CONTENTS
1. RF transmitter
2. RF speakers, 2 pcs.
3. AC adapter for transmitter
4. AC adapters for speaker, 2 pcs.
5. Remote Control
6. 3.5mm plug to 2 X RCA audio cable
7. 3.5mm to 6.3 mm adapter plug
FEATURES
1. 900 MHz RF technology
2. Auto Tuning System on speakers
3. Phase Lock Loop (PLL) transmission system on transmitter
4. Water-proof Speakers
5. Stereo Effect on Speakers
6. Operating distance up to 150 feet.
7. No line of sight limitation.
8. Auto ON/OFF control on Transmitter
9. Auto Shut-Off on Speakers
10. Bass boost function
11. Remote control unit
12. Optional battery operation for Transmitter and Speakers
3
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPONENT IDENTIFICATION
Transmitter
Power / Signal Indicator
(Green / Blue)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPONENT IDENTIFICATION
Speaker
LED
Front View
DC Jack
Back View
Battery Compartment
5
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPONENT IDENTIFICATION
Remote Control
Battery Compartment
Power On / Off
Auto Tune
Bass Boost
Volume Up / Down
Bottom View
Top View
INSTALLATION
Transmitter
1. Connect the supplied AC power adaptor to an electrical wall outlet.
2. Plug the AC power adaptor in the DC jack located on the rear of the
transmitter.
3. Or you can insert 4 X “AA” size ALKALINE batteries into the battery
compartment at the bottom of the transmitter with correct polarity.
4. The rear of the transmitter has one audio cord that can be connected to audio
output jack of TV, iPod, DVD, and CD/MP3 players or to headphone/earphone
jack with the connector provided.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
When the power adapter connection is finished, the LED of transmitter will light
up in Green. When the audio cable connection is finished and turn on the audio
source, the LED will turn from Green to Blue.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Speaker
1. Insert 8 ‘C’ size ALKALINE batteries into the battery compartment with correct
polarity at the bottom of the speakers or connect the 12V power adaptor to
the DC input jack on the bottom of each speaker, then plug it to the wall AC
outlet.
2. Press Power button and turn the speakers ON. The Power/Standby LED will
light up in Blue.
LED
Front View
DC Jack
Back View
Battery Compartment
8
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Remote Control
1. Remove the battery cover at the rear of the remote control unit and insert 2
pcs “AAA” size batteries (not included) into the battery compartment with the
correct polarity.
2. Place back the cover and close the battery compartment.
OPERATION
1. Connect the power adapter between wall jack and transmitter. The LED will
turn to Green.
2. Turn on the audio source (TV or audio component) to which the transmitter is
connected with. The LED will turn from Green to Blue.
3. Select the channel 1, 2 or 3 of the transmitter for best performance in your
location.
4. Turn on the Power button on the speaker and adjust the volume by pressing
“+” and “-“ for desired listening level. Volume can also be adjusted by
pressing “+” and “-” button located on the remote control unit.
5. Push the “AUTO TUNE” button to get the best tuning reception in the
speakers. When the button is pressed, frequency tuning starts automatically
and it stops when a signal is detected.
5. You should now be able to place the speakers freely inside or out within 150
feet from the transmitter.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING OFF
1. If there is no audio input signal to transmitter in 4 minutes, transmitter will go
to standby mode and LED will change from Blue to Green.
2. If the power adapter is unplugged, the LED on transmitter will turn off.
3. Speaker will turn to standby mode if there is no input signal to transmitter
and LED will become Green. Speaker will automatically shut off when standby
mode continues for 5 minutes.
4. Speaker will also turn to standby model if you press the POWER button on
the remote control to Green LED. Speaker will automatically shut off after 5
minutes.
5. At standby mode, speaker will turn to On automatically after getting signal
from transmitter.
OTHER CONTROL
1. Select volume up and down on Speakers or Remote Control Unit.
2. Select Bass Boost On/OFF by pressing the “BASS BOOST” button on Speakers or
Remote Control Unit.
3. If you hear interference from other components, re-adjust the tuning control
by moving channel knob to 1, 2 or 3 of the transmitter, then pressing “AUTO
TUNE” button on speaker or remote unit for best reception.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
NO SOUND
- Ensure the AC adaptor is fully inserted into the AC outlet and the power
connection input on the transmitter.
- Ensure the speaker is switch ON.
- Speaker’s battery capacity is too low, replace with new batteries or connect the
AC adaptors to the speakers.
- Ensure the TV or audio component is ON.
- The connected audio / video equipment is not playing. Start playing the
equipment.
- The volume of speaker is too low, adjust the volume to an appropriate level.
DISTORTED
- Press the “AUTO TUNE” button on the speakers until matching the frequency
of the transmitter.
- Change the position of the channel selector on the transmitter. You must then
press the “AUTO TUNE” button on the speakers.
- Battery capacity is too low. Replace with the new battery.
- Ensure the volume level of speakers is adjusted properly.
- The speaker is too far from transmitter, move closer.
- The input level of the audio signal is too low. Turn up the volume of the audio
source equipment.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
Transmission Mode : UHF stereo
Carrier Frequency
Carrier Frequency
: 900 MHz
: Transmitter, DC 6V 300mA adapter or 4 X
“AA” size Alkaline batteries (not included)
Speaker, DC 12V 750mA adaptor or 8 X
“C” size Alkaline batteries (not included)
Remote Control Unit, 2 X ‘AAA’ size
batteries (not included)
Frequency Response : 40Hz – 12KHz
Distortion
S/N Ratio
: 1.5%
: 65dB (typical)
Channel Separation : 35dB (Typical)
Operation Distance : Up to 150feet
Output Power
: 2 x 5W (Max)
WARNINGS
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This device complies with RSS-210 of Industry and Science Canada. Operation is
subject to the following two conditions : (1) this device may not cause interference,
and (2) this device must accept any interference that may cause undesired
operation of the device.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
PROPOSITION 65
This product may contain chemicals listed in Proposition 65 that may be known to
cause cancer, birth defects or other reproductive harm. For Proposition 65 please
CONTACT
If you have any question regarding your Grace Digital Audio Product please
contact a customer service representative Monday - Friday 8:30AM - 5:00PM Pacific
Standard Time at (866) 446-0961
Grace Digital Audio
San Diego, CA 92129
13
Download from Www.Somanuals.com. All Manuals Search And Download.
|