�������������
�������������������
������������
����������������
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC and Safety Information
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Region Codes
•
•
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Since it is usual for DVD movies to be released at
different times in different regions of the world, all
players have region codes and disc can have an
optional region code. If you load a disc of a different
region code to your player, you will see the region
code notice on the screen. The disc will not play, and
should be unloaded. There are 6 regions (also called
“locals”). Each DVD player and disc will be played in
one region ONLY.
Macrovision Notice
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
2
Canada, U.S., U.S. Territories
Japan, Europe, South Africa, Middle East
(including Egypt)
Southeast Asia, East Asia (including Hong Kong)
Australia, New Zealand, Pacific Islands, Central
America, Mexico, South America, Caribbean
Former Soviet Union, Indian Subcontinent, Africa
(also North Korea, Mongolia)
3
CAUTION
5
6
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN AVOID EXPOSURE TO BEAM. WARNING
LOCATION: INSIDE ON LASER COVERSHIELD.
China
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
For DVD Players with 525p, but not 625p, Progressive Scan output:
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Placement
Avoid placing the unit in areas of:
•
•
•
direct sunlight or heating radiators, or closed
automobiles
high temperature (over 95°F) or high humidity
(over 90%)
significant dust as the internal parts may be
seriously damaged.
Non-use periods
When the unit is not being used, turn it off. When left
unused for a long period of time, the unit should be
unplugged from the household AC outlet.
No fingers or other objects inside
•
Touching internal parts of this unit is dangerous,
and may cause serious damage to the unit. Do not
attempt to disassemble the unit.
•
Do not put any foreign object in the disc tray.
Keep away from water
•
Keep the unit away from flower vases, tubs, sinks,
etc. If liquids are spilled into the unit, serious
damage could occur.
Keep away from magnets
Never bring a magnet or magnetized object near the
unit.
Stacking
•
Place the unit in a horizontal position, and do not
place anything heavy on it.
Condensation
Moisture may form on the lens in the following
conditions:
•
•
•
immediately after a heater has been turned on
in a steamy or very humid room
when the unit is suddenly moved from a cold
environment to a warm one
If moisture forms inside this unit, it may not operate
properly. In this case, turn on the power and wait
about one hour for the moisture to evaporate.
If there is noise interference on the TV while
a broadcast is being received
Power cord protection
Depending on the reception condition of the TV,
interference may appear on the TV monitor while you
watch a TV broadcast and the unit is left on. This is
not a malfunction of the unit or the TV. To watch a TV
broadcast, turn off the unit.
To avoid any malfunctions of the unit, and to protect
against electric shock, fire or personal injury, please
observe the following:
•
Hold the plug firmly when connecting or
disconnecting the AC power cord.
Keep the AC power cord away from heating
appliances.
•
•
•
Never put any heavy object on the AC power cord.
Do not attempt to repair or reconstruct the AC
power cord in any way.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Player Overview
Front View
15
13
DP7040
Portable DVD/CD Player
LCD
Setup
Menu
Mode
Play
Select
Open
2
3 4 5 6 7 8
1
2
3
LCD Screen
10 /Forward Scan - Scans backward
at variable speed during playback. Moves
right in menus. Selects next channel when
using optional TV tuner.
Built-in Speakers
Close Disc Tray - Press here to close the
disc tray.
11 /Pause - Pauses playback. Moves
4 /Reverse Scan - Scans backward
at variable speed during playback. Moves
left in menus. Selects previous channel
when using optional TV tuner.
up in menus.
12 Menu - Displays the disc menu of a DVD.
Selects between Antenna and Cable when
using optional TV tuner.
5
Open Disc Tray - Opens the disc tray.
13 Setup - Displays the player’s Setup menu.
Also displays a special Tuner menu in
Tuner mode.
6 Skip Previous - Skips to previous
chapter/track during playback.
7 /Stop - Stops playback. Moves
Mode - Switches among S-Video,
Progressive Scan, and Tuner modes
(optional TV Tuner required).
down in menus.
8 Skip Next - Skips to next chapter/track
during playback.
15 LCD button Displays options relating to
the display, including Panel, Invert, Color,
and Brightness.
9
Play /Select - Starts playback. Also
makes selections in menus.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Player Overview
Other Views
Front
1
2
Left Side
3
4
5
6
Right Side
7
8
9
10
11
12
13
1
2
3
4
5
6
7
8
IR sensor - Receives input from remote
control.
9
Coaxial Digital Audio Output - Connects
out to a digital amplifier/receiver with a
Dolby Digital or DTS decoder.
Power indicator - Lights when player is
on.
10 AV Out/AV In Switch - Changes the
Video and Audio jacks to be either Inputs
or Outputs.
DC In Jack - Connects to the supplied AC
adapter.
Audio Output/Input - Connects out to
a stereo TV or analog amplifier. Also
connects in from an external audio device,
such as a camcorder or VCR.
Power Off/On Switch - Turns the player
on and off.
TV Tuner Input - Connects to optional
DPT100 TV Tuner.
12 Video Output/Input - Connects out to
a TV or display device. Also connects in
from an external video device, such as a
camcorder or VCR.
TV Tuner Stabilizer - Holds the optional
DPT100 TV Tuner in place.
Volume Control - Adjusts the player’s
volume.
13 S-Video/Progressive Scan Video Output
- Connects out to a TV with S-Video or
Progressive Scan inputs.
Phones 1-2 Jacks - Connects to
headphones or earphones.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Player Overview
Remote Control
1
2
Info. - Displays current chapter/track information.
Setup/Auto Search - Displays the player’s Setup
menu. Also displays a special Tuner menu in
Tuner mode that enables you to Auto Search for
local TV stations.
Auto
Search
TV
Source
Info.
LCD
Title
10
11
12
13
14
16
Setup
Menu
Mode
4
3 /Pause - Pauses playback. Moves up in
menus.
Play
Sel.
5
4
Mode - Switches among S-Video, Progressive
Scan, and Tuner modes (optional TV Tuner
required).
6
7
8
5 /Reverse Scan - Scans backward at
variable speed during playback. Moves left in
menus. Selects previous channel when using
optional TV tuner.
1
4
7
2
5
8
3
6
9
1/All
19
6
Play /Select - Starts playback. Also makes
selections in menus.
0
7 Skip Previous - Skips to previous chapter/
track during playback.
8 /Stop - Stops playback. Moves down in
menus.
9
Numbers - Makes direct selections in menus or
TV broadcast channels with optional tuner.
10 Menu/TV Source - Displays the disc menu of a
DVD. Selects between Antenna and Cable when
using optional TV tuner.
15 /Forward Scan - Scans backward at
variable speed during playback. Moves right in
menus. Selects next channel when using optional
TV tuner.
LCD Displays options relating to the display,
including Panel, Invert, Color, and Brightness.
16
Audio - Selects among available DVD audio
languages.
12
Subtitle - Selects among available DVD
subtitle languages.
17 Skip Next - Skips to next chapter/track during
13 Title - Displays DVD title menu, if available.
playback.
Angle - Selects among available angles during
DVD playback.
18
19
1/ALL - Selects among several Repeat modes.
Mute - Turns the sound on and off.
Inserting Remote Control Batteries
CR2025
Squeeze the release lever and pull the battery tray out of
the remote control.
+
+
2
3
Insert the supplied CR2025 3V lithium battery with the
positive (+) side of the battery facing up.
OPEN
Slide the battery tray back into place.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1 - Connect AC Adapter
Step 4 - Turn on Power
Connect the supplied AC adapter to the DC IN jack on
the left side of the portable DVD player.
Slide the Power button to the On position to turn on
the player.
•
You can also use the supplied cigarette lighter
adapter in place of the AC adapter to supply
power to the player.
Step 5 - Open Disc Cover
Press the Open button to open the disc cover.
Step 2 - Connect Headphones (Optional)
You can listen to the built-in speakers, or connect
headphones or earphones to the Phones 1 or 2 jacks
on the right side of the player.
•
To connect the unit to external equipment, such as
a TV, stereo, or amplifier, see pages 10-11.
Open
Step 6 - Insert Disc
Place the disc in the center
of the tray with the label side
facing up. Gently press the hole
in the disc over the spindle in
the center of the tray.
Step 3 - Open Top Panel
Lift the top panel and adjust the LCD screen to the
desired angle.
Step 7 - Close Disc Cover
Press down on the disc cover until it snaps shut.
•
The disc will load automatically.
Step 8 - Play Disc
Press the /Select button to start playback of the
disc.
•
If a DVD disc menu appears, use the
///keys to select the desired option
and press /Select to confirm.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery Pack While it is
Attached to the Player
Battery Pack Overview
1
Connect the battery pack to the back of the player
as shown.
1
2
3
4
1
2
3
4
DC In Jack
Battery Release Button
Battery Charge Indicator
Battery Connectors
2
Plug the supplied AC adapter into a standard
power outlet, and then connect it to the DC In jack
on the right side of the player.
Charging the Battery Pack
Before using the battery pack, make sure it is fully
charged. You can charge the battery pack directly or
while it is attached to the portable DVD player.
Charging the Battery Pack Directly
1
Plug the supplied AC adapter into a standard
power outlet, and then connect it to the DC IN jack
on the left side of the battery pack.
•
You can also use the supplied cigarette lighter
adapter in place of the AC adapter to charge
the battery.
3
Turn off the player. The battery pack will NOT
charge while the portable DVD player is powered
on.
4
5
The battery charge indicator will turn red while the
battery is charging.
The battery charge indicator will turn green when
the battery pack is fully charged.
Removing the Battery Pack
•
Press the Battery Release button on top of the
battery pack to remove it.
CAUTION
2
3
The battery charge indicator will turn red while the
battery is charging.
•
•
Use the specified battery pack only.
May explode if battery pack is incorrectly
replaced or disposed of in fire. Replace
only with the same or equivalent type.
Do not short circuit.
The battery charge indicator will turn green when
the battery pack is fully charged.
•
•
Allow ~3 hours to fully charge the battery.
•
•
Do not place the battery pack in direct
sunlight or in excessively hot places (over
140°F (60°C) such as the dashboard of
cars.
A fully charged battery permits ~3 hours of
playback time.
•
Use only with the specified power
adapter (12VDC, 1.25A).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic TV Connections
You can connect the portable DVD player to a
standard television using the player’s Audio and
Video jacks.
1
Connect the supplied audio cable (mini-plug to
RCA stereo) from the Audio jack on the side of the
player to the Audio Inputs on your television.
2
Connect the supplied video cable (mini-plug to
RCA video) from the Video jack on the side of the
player to the Video Input on your television.
3
4
Slide the AV Out/AV In switch to the AV Out
position.
AUDIO IN
VIDEO IN
Set your TV to its appropriate Video input to view
the player.
Enhanced Video Connections
For improved picture quality, you can connect the
portable DVD player to a TV equipped with S-Video or
Progressive Scan inputs. These connections require
special cables with mini-plug adapters (not included).
S-Video Connections
��
1
Connect an S-Video cable with mini-plug adapter
(not included) from the S-Video jack on the side of
the player to the S-Video input on your television.
2
3
Slide the AV Out/AV In switch to the AV Out
position.
Set the Video Output to S-Video in the player’s
Screen/TV Tuner menu (see page 23).
S-VIDEO IN
Y
Pb
Pr
•
You can also press the Mode button as a
shortcut to switch between S-Video and
Progressive Scan modes.
4
Set your TV to its S-Video input to view the player.
Progressive Scan/Component Video
Connections
3
4
Set the Video Output to P-Scan in the player’s
Screen/TV Tuner menu (see page 23).
1
Connect a Component Video cable with mini-
plug adapter (not included) from the P-Scan
jack on the side of the player to the Progressive
Scan/Component Video inputs (Y, Pb, Pr) on your
television.
•
You can also press the Mode button as a shortcut
to switch between S-Video and Progressive Scan
modes.
Set your TV to its Progressive Scan input to view the
player.
2
Slide the AV Out/AV In switch to the AV Out
position.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhanced Audio Connections
For enhanced audio quality, you can connect the
portable DVD player to a stereo system or digital
amplifier/receiver.
Analog Audio Connections
1
Connect the supplied audio cable (mini-plug to
RCA stereo) from the AV Out jack on the side of
the player to the left and right Audio Inputs on your
stereo or 2-channel analog receiver.
��
2
3
Slide the AV Out/AV In switch to the AV Out
position.
����������
��������
Set your stereo to its appropriate input to hear the
player.
Digital Audio Connections
1
Connect a digital coaxial cable with mini-plug
adapter (not included) from the Coaxial jack on
the side of the player to the coaxial digital audio
input on your digital receiver.
2
3
Set the Digital Out to SPDIF/PCM (Stereo) or
SPDIF/RAW (Digital) in the player’s Audio Setup
menu (see page 24).
Set your receiver to its appropriate input to hear
the player.
External Device Connections
You can connect an external device, such as a VCR,
camcorder, or video game, to the portable DVD
player.
1
Connect your external device to the audio/video
inputs on the side of the portable DVD player:
•
Video - Requires mini-plug to RCA video cable
(included)
•
Audio - Requires mini-plug to RCA audio cable
(included)
2
Slide the AV Out/AV In switch to the AV In position
to view your external device.
AUDIO OUT
VIDEO OUT
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback
Before You Begin...
Viewing Disc Menus
Connect the portable DVD player to a power outlet
and plug in headphones or listen to the built-in
speakers. You can also connect the player to external
equipment, such as a TV and/or audio system. If you
do this, remember to:
Press Menu. The portable DVD player stops
playback, and then displays the menu screen.
When not in use...
When the portable DVD player is not in use, remove
the disc and press Power to turn off the player. Then
close the display panel.
•
•
•
Turn on your TV and select the appropriate video
input.
Turn on your stereo or audio system and select
the appropriate audio input.
Slide the AV Out/AV In switch to the AV OUT
position.
•
The disc continues to rotate while the menu
is displayed even after the player has finished
playing a particular disc. When no further
selections are to be played, be sure to press the
Stop button to clear the menu screen.
If the disc is placed in the tray upside down (and
it is a single sided disc), the “NO DISC” message
will appear.
•
Basic DVD Playback
1
2
3
Press Power on.
Press Open
to open the disc cover.
For your reference:
Hold the edge of the disc and place it in the tray
with the label side up.
•
When “ ” appears when a button is pressed,
it means that the corresponding function is
prohibited by the player.
•
Press the disk onto the spindle in the center of
the tray.
4
Close the disc cover.
Stopping Playback
•
The portable DVD player starts playback or
opens the DVD disc menu automatically.
•
Press Stop once to stop and hold playback at
the current position.
•
Proceed with steps 5 and 6 when a menu is
available on the disc.
•
Press Stop twice to stop and reset the disc to
the beginning.
5
6
Press ///or use the number button(s)
to select the desired chapter/title.
•
To select a chapter/title, input the number; e.g.,
press “1” for chapter 1, “10” for chapter 10, etc.
Press
/Select
•
The player starts playback of the selected item.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback
Forward/Reverse Scan
Repeat
Press or during playback.
Press
1/All repeatedly during playback to select
•
Normal playback is resumed when you press
/Select
from the following options:
•
•
•
•
Press once to repeat the current Chapter
Press twice to repeat the current Title
Press three times to repeat the current Disc
Press four times to turn repeat Off
•
The Forward Scan (x2,x4, etc.) and
Reverse Scan (x2, x4, and etc.) speed
changes each time you press the /buttons.
To return to normal playback
Skip Next/Previous
You can skip to a specific chapter or track during
playback.
Press
1/All until “REPEAT Off” appears.
•
Repeat playback works only with discs for which
the elapsed playing time appears on the player’s
display during playback.
Skipping Ahead
Press during playback.
•
Repeat playback may not work correctly with
some DVDs.
•
Skips a chapter each time you press the
button.
Skipping Back
Press during playback.
•
When you press the button midway through
a chapter, the portable DVD player returns to the
beginning of the chapter. The player then skips a
chapter each time you press the button.
Pause
Pressonce during playback.
•
•
The screen is paused.
Press Pause repeatedly to step through the scene
frame by frame.
•
To return to normal playback, press
/Select
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Special DVD Features
Displaying Scene Information
Subtitles
Press Info. during playback.
If a disc provides subtitles, you can choose to hide
or display them. This operation works only with discs
that provide subtitles.
•
Press Info. repeatedly to display the title number,
chapter number, and other information on the
screen.
1
Press
Subtitle during playback.
Stop Displaying Scene Information
•
When you press Subtitle once, the first
•
Press Info. repeatedly until the scene information
subtitle language recorded on the disc will be
displayed. The rest of the subtitles recorded will
display in sequence as you press the button.
disappears.
•
If no subtitles are recorded “
instead of the language number.
” will display
You can change the audio sound track to any
available language on the disc.
2
Press
language is selected.
Subtitle repeatedly until the preferred
1
2
Press
Press
language is selected.
Audio during playback.
•
•
You can change to another language with
Audio repeatedly until the preferred
this function, or you can clear the subtitles by
pressing this button repeatedly until “SUBTITLE
OFF” appears on the screen.
For your reference:
•
In some cases, the subtitle language may not
change immediately to the selected one.
If the preferred language is not shown as an
option even after pressing the button several
times, it may indicate that language is not
available on the disc.
When you load or remove the disc, the portable
DVD player will search for the Audio language
selected in the Setup Menu. If your preferred
language is not available on the disc, the portable
DVD player will playback the disc’s default
language.
For your reference:
•
If the preferred subtitle language is not displayed
as an option even after pressing the button
several times, it may indicate that the language is
not available on the disc.
When you load or remove the disc, the portable
DVD player will search for the Subtitle language
selected in the Setup Menu. If your preferred
language is not available on the disc, the portable
DVD player will playback the disc’s default
language.
•
•
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Special DVD Features
Angle
Title
Some DVD discs contain scenes which have been
shot simultaneously from a number of different
Some DVDs have Title menus, which allow you to
choose among multiple titles (usually movies).
angles. Use the
Angle button to view these
alternative scenes.
1
Press Title in stop mode
The Title menu appears, if available.
•
1
2
Press
Press
Angle during playback.
Angle repeatedly until the preferred
3
Press ///to select the preferred item.
Press /Select
viewing angle is selected.
•
ANGLE will only function on discs where
different angles have been recorded.
Most DVDs have disc menus, which include special
disc features, including audio languages, subtitle
languages and more.
Mute
To mute the volume on the portable DVD player.
2
Press /Select
Press Menu
1
Press Mute during playback.
•
To resume normal sound, press MUTE
repeatedly until “MUTE OFF” appears on the
screen.
•
The Disc menu appears, if available.
3
Press ///or use the number button(s)
to select the preferred item.
•
Menu details vary by disc.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Disc Playback
Forward/Reverse Scan
Press or during playback.
Playing Audio CDs
•
•
Normal playback is resumed when you press
/Select
The Forward Scan (x2,x4, etc.) and
Reverse Scan (x2, x4, etc.) speed changes
each time you press the /buttons.
Before You Begin...
Connect the portable DVD player to a power outlet
and plug in headphones or listen to the built-in
speakers. You can also connect the player to external
equipment, such as a TV and/or audio system. If you
do this, remember to:
Skipping Ahead
Press during playback.
•
•
•
•
Turn on your TV and select the appropriate video
input.
Turn on your stereo or audio system and select
the appropriate audio input.
Slide the AV Out/AV In switch to the AV Out
position.
Skips a track each time you press the button.
Skipping Back
•
•
Press during playback.
When you press the button midway through
a track, the portable DVD player returns to the
beginning of the track. The player then skips a
track each time you press the button.
Basic Audio CD Playback
1
2
3
Press Power on.
Press Open
to open the disc cover.
Hold the edge of the disc and place it in the tray
with the label side up.
Pause
PressPause once during playback.
•
Playback is paused.
•
Press the disk onto the spindle in the center of
the tray.
To return to normal playback
4
Close the disc cover.
Press
/Select
•
•
Standard CDs start playing automatically.
Displaying Track Information
Press Info. during playback.
If the CD has playback control, the CD disc
menu will appear.
•
Press Info. repeatedly to display the elapsed
time, track number, and other information on the
screen.
Stopping Playback
•
Press Stop once to stop and hold playback at
the current position.
Press Stop twice to stop and reset the disc to
the beginning.
Stop Displaying Track Information
•
•
Press Info. repeatedly until the track information
disappears.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Disc Playback
Play Mode
Playing Kodak Picture CDs
Play mode allows you to view your images in a slide
show.
You can play Kodak Picture CDs in your portable DVD
player.
1
Press /to select the Play icon (
press /Select
), then
Basic Playback
2
The slide show starts playing from the current
image.
1
Load a Kodak Picture CD.
• After a few seconds, the portable DVD player
starts a slide show of available images.
•
Press and to view the previous or next
image.
3
Press Info. to view the current image number and
total number of images.
•
Press /to rotate the current image in 90
degree increments.
Use the number keys to jump to a specific image.
•
•
•
Press Pause to pause the slide show.
•
The portable DVD player will begin the slide
show from the selected image.
Press
/Select to resume the slide show.
Press Stop to return to Thumbnail mode.
•
•
Press Pause to pause the slide show.
Press Stop to stop the slide show and enter
Thumbnail mode.
Program Mode
Program mode allows you to create a custom slide
show.
Playback Modes
1
Press Stop to stop the slide show.
There are four modes while playing a Kodak Picture
CD:
2
Press ///to select “Program” then
press
/Select
•
•
•
•
Thumbnail Mode
Rotate Mode
Play Mode
3
4
Press ///to highlight the desired
images, then press /Select to mark them with a
yellow box and add them to your Program List.
Program Mode
Press ///to choose “Program List”,
then press
/Select
Thumbnail Mode
•
The Program List menu appears with
thumbnails of all your marked images.
Thumbnail mode allows you to view thumbnails of up
to 15 images at a time.
1
2
Press Stop to stop the slide show.
5
Press ///to choose the Play icon (
),
then press
images.
/Select to play the programmed
Press ///to select “Return” then press
/Select
3
Press and to view the previous or next
To delete an image from the programmed list
Press ///to choose the image, then
press /Select
page of thumbnail images.
•
4
5
Press ///to choose the desired image.
Press
/Select to see the full size image and
To delete all images from the programmed list
Select “Clear all” and press /Select
start the slide show.
•
Rotate Mode
You can rotate your images clockwise in 90 degree
increments.
To exit the programmed list
Press /to choose “Return”, then
press /Select
•
1
Press Stop to stop the slide show.
To exit program mode.
Press /to choose “Return” again, then
press /Select
2
Press ///to select “Rotate” then press
•
/Select
3
Press and to view the desired page of
thumbnail images.
4
5
Press ///to choose the desired image.
Press
/Select repeatedly to rotate the image
clockwise in 90 degree increments.
To restore all rotated images to their original
state, choose “Reset” and press /Select
•
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Disc Playback
Program Mode
Playing JPEG Picture CDs
Program mode allows you to create a custom slide
show.
You can play JPEG picture CDs in your portable DVD
player.
1
Press ///to highlight the desired
images, then press /Select to mark them with a
Basic Playback
yellow box and add them to your Program List.
1
Load a JPEG Picture CD.
2
Press /to choose “Program List”, then press
• After a few seconds, the portable DVD player
starts a slide show of available images.
/Select
•
The Program List menu appears with a list of
all of your marked images.
3
Press Info. to view the current image number and
total number of images.
3
Press /to choose the Play icon (
), then
Use the number keys to jump to a specific image.
press /Select to play the programmed files.
•
The portable DVD player will begin the slide
show from the selected image.
To delete a file from the programmed list
•
Press /to choose the file, then press
•
•
PressPause to pause the slide show.
Press Stop to stop the slide show and enter
File Manager mode.
/Select
To delete all files from the programmed list
Select “Clear all” and press /Select
•
Playback Modes
There are four modes while playing a JPEG Picture
CD:
To exit the programmed list
Press /to choose “Return”, then
press /Select
•
•
•
•
•
File Manager Mode
Play Mode
Program Mode
Thumbnail Mode
To exit program mode.
Press /to choose “Return” again, then
press /Select
•
To enter these modes:
Thumbnail Mode
Thumbnail mode allows you to view thumbnails of up
to 15 images at a time.
1
2
3
Press Stop
Press /to select the desired mode.
•
Press ///to choose the desired image,
then press /Select to see the full size image
Press
/Select to enter the selected mode.
and start the slide show.
Press and to view the previous or next
page of thumbnail images.
File Manager Mode
File Manager mode allows you to view your images in
a directory format.
•
•
To rotate an image, first select it, then choose
•
Press ///to choose the desired image,
then press /Select to display the image.
“Rotate” and press
rotated images to their original state, choose
“Reset” and press /Select
/Select. To restore all
•
Press and to view the previous or next 6
images in the list.
Play Mode
Play mode allows you to view your images in a slide
show.
•
Press and to view the previous or next
image.
•
Press /to rotate the image in 90 degree
increments.
•
•
•
Press Pause to pause the slide show.
Press
/Select to resume the slide show.
Press Stop to return to File Manager mode.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Disc Playback
Programming MP3 CDs
Program mode allows you to create a custom play list.
Playing MP3 CDs
1
2
3
Press Power on.
Press Open to open the disc cover.
1
2
Press Stop to stop playback.
Hold the edge of the MP3 disc and place it in the
tray with the label side up.
Press /to select “Program”, then press
/Select
•
Press the disk onto the spindle in the center of
the tray.
3
4
Press ///to highlight the desired
tracks, then press
/Select to mark them with a
4
Close the disc cover.
yellow box and add them to your Program List.
•
After a few moments, the first MP3 file in
the disc’s root directory will start playing
automatically.
Press /to choose “Program List”, then press
/Select
•
The Program List menu appears with a list of
all of your marked tracks.
Browsing Directories
5
Press /to choose the Play icon (
press /Select to play the programmed files.
), then
MP3 discs are often divided into directories (i.e.,
folders) which are subdivided into MP3 tracks. If your
disc contains directories:
To delete a track from the programmed list
•
Press /to choose the track, then press
1
2
Press Stop to stop playback.
/Select
Press ///to choose the desired
To delete all tracks from the programmed list
Select “Clear all” and press /Select
directory, then press
/Select to open it.
•
3
Press ///to choose the desired track,
then press /Select to start playback.
You can also enter a track number directly with
To exit the programmed list
•
•
Press /to choose “Return”, then press
the number buttons, then press
start playback.
/Select to
/Select
To exit program mode.
Press /to choose “Return” again, then
press /Select
To stop playback
Press Stop
•
•
To skip to the previous/next track.
Press /during playback.
Playing CDs with MP3 and JPEG files
•
The portable DVD player will play CDs with MP3
and JPEG files. The operations are the same as with
standard MP3 and JPEG discs.
To pause playback
PressPause
•
To resume playback
Press /Select
•
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Setup
On Screen Display (OSD) Language
Disc Menu Language
You can select among various languages for the
player’s on-screen display (OSD).
You can select your preferred language for DVD disc
menus.
1
2
Press Setup in Stop mode.
1
2
Press Setup in Stop mode.
Press /to select “Language Setup”, then
Press /to select “Language Setup”, then
press
/Select
press
/Select
3
Press /to select “OSD”, then press
3
Press /to select “Menu”, then press
/Select
/Select
Language Setup
Language Setup
English
French
German
Italian
OSD
English
OSD
Menu
Audio
Subtitle
Chinese
Japanese
French
Menu
Audio
Subtitle
Spanish
German
: Move
: Select SETUP: Quit
: Move
: Select SETUP: Quit
4
5
Press /to select your preferred language.
Press /Select
4
5
Press /to select your preferred language.
Press /Select
To return to the Setup menu
Press
To return to the Setup menu
Press
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Setup
Audio Language [DVD]
Subtitle Language [DVD]
You can select your preferred language for DVD
audio sound tracks.
You can select your preferred language for DVD
subtitles.
1
2
Press Setup in Stop mode.
1
2
Press Setup in Stop mode.
Press /to select “Language Setup”, then
Press /to select “Language Setup”, then
press /Select
press
/Select
3
Press /to select “Subtitle”, then press
/Select
3
Press /to select “Audio”, then press
/Select
�������� �����
Language Setup
�������
���
English
OSD
�������
��������
������
����
�����
��������
Chinese
Japanese
French
Menu
Audio
Subtitle
������
German
� ����
� ������ ������ ����
: Move
: Select SETUP: Quit
4
5
Press /to select your preferred language.
Press /Select
4
5
Press /to select your preferred language.
•
Select “Original” if you want the default
language to always be played first.
•
If the selected language is not available on the
disc, the player will select the disc’s default
language.
Press
/Select
•
If the language selected is not recorded on the
disc, the DVD player will playback the disc’s
default language.
To return to the Setup menu
Press
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
To return to the Setup menu
Press
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen/TV Tuner Setup
TV Type
3
Press /to select “Screen Saver”, then press
/Select
The TV Type feature allows you to set your preferred
aspect ratio for DVD movies. Choose from the
following:
4
5
Press /to select “On” or “Off”.
Press
/Select
•
4:3 PS (Pan & Scan) - Crops widescreen movies
to fit a standard television.
To return to the Setup menu
Press
•
4:3 LB (Letterbox) - Shows the full width of
widescreen movies on a standard television with
black bars above and below the picture.
16:9 - Select if you have a widescreen television.
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
•
1
2
Press Setup
TV System
Press /to select “Screen/TV Tuner”, then
press
/Select
When connecting the portable DVD player to a
TV, you must specify the broadcast system of your
television. Choose from the following:
3
Press /to select “TV Type”, then press
/Select
•
NTSC - The color TV broadcast standard for the
USA, Canada, Latin America and Taiwan.
PAL - The color television broadcast standard for
Western Europe (except France, where SECAM
is the standard), Australia, China, Singapore and
Malaysia.
Screen TV Tuner
•
4:3 PS
4:3 LB
16:9
TV Type
Screen Saver
TV System
ideo Output
Country
•
AUTO - Select if you have a multi-system TV that
supports both NTSC and PAL.
1
2
Press Setup
: Move
: Select SETUP: Quit
Press /to select “Screen/TV Tuner”, then
press
/Select
4
5
Press / to select your preferred TV Type
3
Press /to select “TV System”, then press
/Select
setting.
Press
/Select
Screen TV Tuner
To return to the Setup menu
Press
NTSC
PAL
TV Type
Screen Saver
TV System
Video Output
Country
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
AUTO
Screen Saver
The Screen Saver comes on automatically to protect
the LCD screen if the player is left in Stop mode for
10 or more minutes.
: Move
: Select SETUP: Quit
4
5
Press / to select the appropriate TV System
setting for your television.
1
2
Press Setup
Press
/Select
Press /to select “Screen/TV Tuner”, then
press
/Select
To return to the Setup menu
Press
Screen TV Tuner
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
On
Off
TV Type
Screen Saver
TV System
Video Output
Country
: Move
: Select SETUP: Quit
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen/TV Tuner Setup
Video Output
Country
If you are using the S-Video/Progressive Scan video
output to connect the portable DVD player to your TV,
you must specify which connection you are using (S-
Video or P-SCAN).
In addition to the USA, the optional DPT100 TV Tuner
can be set to receive television broadcasts in Japan
or Taiwan. Be sure to set the Country to the correct
setting when travelling to these countries.
•
Before you select P-SCAN, make sure your TV
supports Progressive Scan and that the Y, Pb, and
Pr cables are properly connected.
1
2
Press Setup
Press / to select “Screen/TV Tuner”, then
•
If your screen turns black after adjusting this
setting, press the Mode button to switch back to
S-Video mode.
press
/Select
3
Press /to select “Country”, then press
/Select
1
2
Press Setup
Screen TV Tuner
Press /to select “Screen/TV Tuner”, then
press
/Select
Japan
TV Type
Taiwan
USA
Screen Saver
TV System
ideo Output
Country
3
Press /to select “Video Output”, then press
/Select
Screen TV Tuner
S-Video
P-SCAN
TV Type
Screen Saver
TV System
Video Output
Country
: Move
: Select SETUP: Quit
4
5
Press /to select the appropriate Country
setting.
Press
/Select
: Move
: Select SETUP: Quit
To return to the Setup menu
Press
4
5
Press /to select the appropriate Video
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
Output setting for your television.
Press
/Select
•
If you selected P-SCAN, you will be prompted
to confirm that your TV supports Progressive
Scan. Press
to cancel.
/Select to continue, or Stop
Screen TV Tuner
o
TV Type
Screen Saver
P-SCAN
Your TV Supports P-Scan
YES
NO
Press Play
Press Stop
4
: Move
: Select SETUP: Quit
To return to the Setup menu
Press
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Setup
Digital Audio Output [DVD]
WARNING:
The digital audio output jack (labeled “Coaxial”) is
used to output the audio signal recorded on DVD
discs to an external amplifier/receiver. The player
provides three options for this audio signal:
•
Do not set “Digital Out” to “SPDIF/RAW”
unless you are connecting the player to an
A/V amplifier/receiver with Dolby Digital (AC-3)
decoding capability.
•
•
•
SPDIF/PCM - Select if you are using a 2-channel
digital amplifier.
SPDIF/RAW - Select if you are using a Dolby
Digital 5.1 or DTS capable amplifier.
Off - Select if you are not using the Coaxial audio
output.
•
High volume sound may damage your hearing
as well as the speakers.
To return to the Setup menu
Press
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
1
2
Press Setup in Stop mode.
Press /to select “Audio Setup”, then press
/Select
3
Press /to select “Digital Out”, then press
/Select
Audio Setup
SPDIF/PCM
SPDIF/RAW
Off
Digital Out
: Move
: Select SETUP: Quit
4
5
Press /to select your preferred Digital Out
setting.
Press
/Select
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Custom Setup
Parental Control [DVD]
Change Password [DVD]
The Parental Control feature enables you to block
playback of movies based on their rating. For
To change the Parental Control password:
example, if you set the rating level to PG-13, the
player will block playback of movies rated PG-13, R,
NC-17 and X unless the correct password is entered.
1
2
Press Setup in Stop mode.
Press /to select “Custom Setup”, then press
/Select
•
You can only use the Parental Control feature with
rated DVD discs.
3
Press /to select “Password”, then press
/Select
1
Press Setup in Stop mode.
Custom Setup
•
You must remove any disc loaded in the player
to change the Parental Control setting.
Parental Ctrl
Password
An
3
Press /to select “Custom Setup”, then press
/Select
:
_
_
_
_
De
New:
Verify:
Press /to select “Parental Ctrl”, then press
/Select
Custom Setup
: Move
: Select SETUP: Quit
1
Parental Ctrl
Password
Angle Mark
Default
2
4
Enter your old password, then press
/Select
3:PG
4: PG13
5
•
The factory pre-set password is “0000”.
5
6
Enter your new password, then press
/Select
Re-enter your new password to verify it, then
press /Select
: Move
: Select SETUP: Quit
To return to the Setup menu
Press
4
5
Enter a 4-digit password, then press
/Select
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
•
•
The factory pre-set password is “0000”.
You must enter “0000” to set the rating for the
first time when purchasing your DVD from the
store.
Press /to select the desired rating and
press /Select
To return to the Setup menu
Press
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Custom Setup
Angle Mark [DVD]
Restore Defaults
Some DVDs feature scenes filmed at different angles,
which you can select by pressing the ANGLE button.
You can have the player alert you when multiple
angles are available by displaying an Angle Mark
Select “Default” to restore the portable DVD player to
its factory default settings.
1
2
Press Setup in Stop mode.
(
•
) on screen.
Press /to select “Custom Setup”, then press
Whether Angle Mark is set to On or Off, pressing
the ANGLE button will always allow selection of
multiple angles if they are available.
/Select
3
Press /to select “Default”, then press
/Select
•
“READ” will be highlighted.
1
2
Press Setup in Stop mode.
Press /to select “Custom Setup”, then
Custom Setup
press
/Select
Read
Parental Ctrl
Password
Angle Mark
Default
3
Press /to select “Angle Mark”, then press
/Select
Custom Setup
On
Off
Parental Ctrl
Password
Angle Mark
Default
: Move
: Select SETUP: Quit
4
Press
/Select
•
•
The player’s factory settings will be restored.
The Parental Control rating and Password
settings will NOT be changed.
: Move
: Select SETUP: Quit
To return to the Setup menu
Press
4
Press /to select “On” or “Off”, then press
/Select
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
To return to the Setup menu
Press
To exit the Setup menu
Press Setup or select “Exit Setup” on the Setup
Menu screen.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Setup
The LCD button provides a shortcut to four common
screen adjustments.
Color
1
2
Press the LCD button.
Use the /buttons to select “Color” then
press
Panel
1
2
Press the LCD button.
Use the /buttons to select “Panel” then
press
3
Use the /buttons to decrease or increase
the color saturation from -3 to +3 and then press
/Select
3
Use the /buttons to select from the
following, then press /Select
Normal - Stretches the on-screen image to fill
•
•
•
the screen.
16:9 - Sets the image to the standard
widescreen aspect ratio.
Brightness
2
4:3 - Sets the image to the standard TV aspect
ratio.
Press the LCD button.
•
•
Zoom - Magnifies the on-screen image.
Use the /buttons to select “Bright” then
press
Close - Turns the LCD screen off to preserve
battery life; e.g., while listening to a CD or MP3
disc. The audio will still be heard but there will
be no picture on the screen. To restore normal
viewing, press LCD again and choose one of
the other Panel settings.
Bright
Invert
1
2
Press the LCD button.
3
Use the /buttons to decrease or increase
screen brightness from -3 to +3 and then press
/Select
Use the /buttons to select “Invert” then
press
3
Use the /buttons to select “On” or “Off” and
then press /Select
•
The on-screen image will invert (flip 180º)
when “On” is selected. Use this feature when
mounting the player on the ceiling; e.g., in a car
or minivan.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Optional DPT100 Tuner
About the DPT100
Connecting the Tuner
The DPT100 is an optional 181-channel tuner that
converts your DVD player into a portable television.
The tuner connects to the side of the DVD player
and is powered by the player, so no additional power
source is required. Use the supplied antenna to
receive local TV broadcasts while you’re on the go. Or
for improved reception, use the RF adapter to connect
to your home’s cable TV source or a rooftop antenna.
Connect the TV tuner to the DVD player as follows:
1
Align the tuner with the edge of the DVD player
and insert the tuner’s connector into the DVD
player’s TV Tuner Input jack.
•
The tuner support pin must be inserted at
the same time as the jack to make a secure
connection.
1
2
3
Using the Antenna
Connect the antenna to the TV tuner as follows:
1
2
3
1
Connect the TV tuner to the player as described
above.
RF Adapter
2
Connect the antenna to
the EXT. ANT port on the
tuner. Align the square
base of the antenna
jack with the sides of the
input.
Video Output connector:
Connects to the DVD player
3
You are now ready to
search for channels.
Using the RF Adapter
Connect the RF adapter to the TV tuner as follows:
1
2
3
Connect the TV tuner to the player as described
above.
Connect the RF adapter to the EXT. ANT port on
the tuner.
Connect the RF cable from your cable TV wall
outlet, cable box, antenna, or other RF source to
the RF adapter.
Antenna
4
You are now ready to search for channels.
Input Jack
Connects to
the antenna or
RF adapter
Tuner Support Pin:
Connects to the DVD player
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Optional DPT100 Tuner
Searching for Channels
Fine Tuning Channels
Use the Auto Search feature to scan for available
channels in your area.
You can fine tune individual channels to improve
reception.
1
2
Connect the TV tuner to the DVD player.
1
2
3
4
Press Mode until “Tuner” appears in the upper left
corner of the screen.
Connect the antenna or RF adapter to the TV
tuner.
While in Tuner mode, press Setup/Auto Search
to display the Tuner Setup menu.
•
If you are using the RF adapter, be sure to
connect it to an external antenna or cable TV
source.
Press the /buttons to select the channel you
want to fine tune.
3
4
Turn the DVD player on.
Use the /buttons to select “Freq”.
Press Mode until “Tuner” appears in the upper left
corner of the screen.
5
6
7
While in Tuner mode, press Menu/TV Source to
set the TV source to “Antenna” or “Cable”.
While in Tuner mode, press Setup/Auto Search
to display the Tuner Setup menu.
Use the /buttons to select Auto Search
5
Use the /buttons to fine tune the channel for
optimal reception.
Freq
Adding or Removing Channels
After Auto Search has stored all available channels,
you can manually add or remove channels from the
list.
8
9
Press to begin Auto Search.
1
2
3
4
Press Mode until “Tuner” appears in the upper left
corner of the screen.
•
The tuner will detect and store all available TV
channels in your area. This may take several
minutes.
While in Tuner mode, press Setup/Auto Search
to display the Tuner Setup menu.
•
When finished, the DVD player will display the
lowest channel found.
Use the /buttons to select the channel you
want to add or remove from the list.
Press Setup/Auto Search to exit the Tuner Setup
menu.
Use the /buttons to select “Favorite”.
Selecting Channels
To select stored channels:
•
Use the /buttons to select the previous or
next stored channel.
5
Press to toggle the “Favorite” setting between
“Yes” (added) and “No” (removed).
•
You can also use the 0-9 keys on the remote
control and press
directly.
/Select to select channels
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before requesting service for the portable DVD player, check the chart below for a possible cause of the
problem you are experiencing. Some simple checkups or a minor adjustment on your part may eliminate the
problem and restore proper operation.•
SYMPTOM
No power.
REMEDY
• Insert AC adapter plug securely into power outlet.
• Check Power button.
• Check power at AC outlet by testing another appliance.
Player does not start
playback when PLAY is
pressed.
• Condensation has formed: wait ~1-2 hours to allow player to dry out.
• Player cannot play discs other than DVDs, Audio CDs, MP3 CDs, and Photo CDs.
• Check if disc is defective by trying another disc.
• Check region (local) code.
Player starts playback but
stops immediately.
• Disc may be dirty and may require cleaning.
• Ensure that disc is installed with label side up.
No picture.
• Make sure the AV Out/AV In switch is set to AV OUT.
• Ensure that equipment is connected properly.
• Ensure that input setting for TV is set correctly.
• Check if external equipment is on.
• Select same channel and source on TV as on player.
• Check if LCD is on.
No sound.
• Ensure that equipment is connected properly.
• If using a HiFi amplifier, try another audio source.
• Check Volume adjustment.
Distorted sound.
• Ensure that input settings for your TV and stereo system are correct.
• No sound is heard during Pause mode.
No audio from Digital
Output.
• Check digital connections.
• Check Audio Setup menu to make sure that “SPDIF/RAW” or “SPDIF/PCM” is selected.
• Check if the audio format of the selected audio language matches your receiver
capabilities.
Distorted picture.
• Check disc for fingerprints and clean with a soft cloth, wiping from center to edge.
• Sometimes a small amount of picture distortion may appear. This is not a malfunction.
Completely distorted picture • Disc format does not match TV format (PAL/NTSC).
or no color in picture.
Picture distorted during
forward or reverse scan.
• Picture will be somewhat distorted at times. This is normal.
• Some discs may have sections which prohibit Forward/Reverse Scan.
• Choose the correct “TV Type” setting in the Setup menu.
No forward or reverse scan
playback.
No 4:3 (16:9) picture.
Remote control does not
function.
• Make sure battery is installed with correct polarities (+ and –).
• Battery is depleted: replace with new one.
• Point remote control at signal sensor.
• Operate remote control within 20 feet of signal sensor.
• Remove obstacles between remote control and signal sensor.
DVD player and remote
control keys not functioning.
• Power unit off and on. Alternatively, turn off unit, unplug power cable and plug it back in.
(Player may not be operating properly due to lightning, static electricity or some other
external factor.)
Playback does not start
when Title is selected.
• Parental Control function may be set. Confirm the “Parental Ctrl” setup.
Audio sound track and/or
subtitle language not
selected.
• If audio sound track and/or subtitle language are not available on the disc, language
selected in Setup menu will not be seen/heard.
No subtitles.
• Subtitles not available on all discs.
• Subtitles are available but turned off. Press Subtitle to display the subtitles.
Alternative audio sound
track (or subtitle) languages
cannot be selected.
• Only one language is available.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Handling & Maintenance
Handling Precautions
If the disc is brought from a cold to a warm
environment, moisture may form on the disc
•
•
•
•
Hold the disc by the edges
so the surface will not be
soiled with fingerprints.
Fingerprints, dirt and
scratches can cause
skipping and distortion.
Do not write on the label
side with a ball-point pen or
other writing utensil.
•
Wipe moisture off with a soft, dry, lint-free cloth
before using the disc.
Improper disc storage
You can damage discs if you store them in the
following places:
•
•
•
Areas exposed to direct sunlight
Humid or dusty areas
Areas directly exposed to a heat outlet or heating
appliance
Do not use record cleaning
sprays, benzine, thinner, static electricity
prevention liquids, or any other solvent.
Be careful not to drop or bend the disc.
Do not install more than one disc on the disc tray.
Do not try to close the disc cover when the disc is
not installed properly.
•
•
•
Disc which cannot be played with this player
•
•
•
•
CD-ROM (Application Program)
CVD
CD-G
DVD with a Region Code other than that shown
on the DVD unit’s Region Code Label on the rear
panel
•
Be sure to store the disc in its original case when
not in use.
If the surface is soiled
•
Wipe gently with a soft,
damp (water only) cloth.
When wiping discs, always
move the cloth from the
center hole toward the outer
edge. (If you wipe the disc
using a circular motion,
circular scratches are likely
to occur, which will cause
noise.)
Maintenance
•
Be sure to turn the unit off and disconnect the AC
power cord before maintenancing the unit.
Wipe this unit with a dry soft cloth. If the surfaces
are extremely dirty, wipe clean with a cloth which
has been dipped in a weak soap-and-water
solution and wrung out thoroughly, and then wipe
again with a dry cloth.
•
•
•
Never use alcohol, benzine, thinner, cleaning fluid
or other chemicals. And do not use compressed
air to remove dust.
Troubleshooting the Optional Tuner
SYMPTOM
REMEDY
Angle cannot change.
• Depends on software availability. Even if a disc has a number of angles recorded, these
angles may be recorded for specific scenes only.
No picture with tuner
• Make sure the antenna and tuner are connected.
• Make sure Tuner is selected as the signal source by pressing the Mode button.
• Make sure Cable / Antenna is set to match the source of the signal by pressing the Menu
button in Tuner mode.
Picture quality poor with
tuner
• Make sure the antenna connections are correct and that the Tuner support pin is also
connected.
• Adjust the antenna position for better picture
• Move the DVD player away from any interfering device.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
A number of replacement parts and optional accessories are available for this portable DVD player. To order
any of the items below, please contact the GoVideo Parts department at:
•
•
800-736-7679, option 8
or via e-mail at: [email protected]
ITEM
DESCRIPTION
PART NUMBER
Rechargeable NiMH Battery Pack
Rechargeable Li-ion Battery Pack (optional)
Rechargeable Li-ion Battery Pack (optional)
Universal AC/DC Power Adapter
Cigarette Lighter Adapter
Remote Control
NiMH 3800mAh (~2.7 hour DVD playback time)
Call for Part No.
Li-ion 4000mAh (~3 hour DVD playback time)
Li-ion 6600mAh (~5 hour DVD playback time)
100-240V, 12V/1.25A adapter
Call for Part No.
92-135-43070
43-111-00077
54-201-00047
Call for Part No.
54-201-00044
54-201-00045
86-135-04010
54-401-00015
54-201-00020
54-201-00046
12V car cigarette lighter adapter
Credit card-size remote with 3V battery
Mini-plug to red/white RCA connectors
Mini-plug to yellow RCA connector
Viewable carrying case
Audio Cable
Video Cable
Carrying Case
Earphones
Stereo earphones
S-Video Cable
Mini-plug to S-Connector
Progressive Scan Component Video Cable
Mini-plug to red/green/blue RCA connectors.
Included Accessories
The following items are included with your portable DVD player:
•
•
•
•
•
•
•
•
Rechargeable NiMH Battery Pack
Universal AC/DC Power Adapter
Cigarette Lighter Adapter
Remote Control with 3V Battery
Audio Cable
Video Cable
User’s Guide
Quick Reference Guide
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Who Provides the Limited Warranty
During the warranty period, the GoVideo Warranty Administrator will honor service
for 90 days labor, 1 year parts from the original date of consumer purchase. See
below for Commercial, Industrial or Educational use coverage. Remote controls
are warrantied for 90 days from the date of purchase.
Who is Protected
This warranty protects the original consumer owner of this GoVideo product.
What is Covered and How Long
This warranty covers internal operating parts and service/labor to repair or replace covered parts in
this GoVideo product for 90 days labor, 1 year parts, from the date of purchase, defined as follows: (1)
Original Consumer Retail Purchase; (2) First Rental Purchase Agreement; or (3) First Lease Purchase
Agreement (the “Warranty Period”). Labor and replacement parts supplied during the Warranty Period
are covered only for the remaining portion of the original Warranty Period. The GoVideo Warranty
Administrator shall have no liability for service under this warranty if non-OEM (Original Equipment
Manufacturer) replacement parts are used in the repair of your GoVideo product.
What the Owner Must Do If Service is Required
Please contact our customer service department at 1-800-736-7679 to repair or replace your product,
at GoVideo’s option, if it proves to be defective in material or workmanship under normal use, during
the warranty period listed above, effective from the date of original consumer purchase of the product.
Repaired or replacement units are warrantied for the remaining period of the original warranty. Please
retain dated sales receipt. Within the warranty period, the customer pays for inbound shipping charges
and GoVideo pays return shipping charges.
Other Warranty Coverage
Commercial, Industrial or Educational use has the same warranty coverage as stated in this warranty.
What are the Exceptions
This warranty does not cover: (1) Normal maintenance service, such as cleaning. (2) Damage from
misuse, abuse neglect or accident, natural disasters or Acts of God. (3) Cabinetry, decorative parts,
A/C adapters, knobs or buttons. (4) The foreign country use of this product. (5) GoVideo product
which has been electronically or mechanically modified in any way or incorporated into other products.
(6) Installation and setup service adjustments. (7) Owner instruction. Your Owner’s Guide provides
information regarding operating instructions and user controls. For additional information, contact your
authorized GoVideo dealer.
Go Video is not responsible for any shipping, handling or insurance charges.
This Exclusive Limited Warranty excludes all incidental and consequential damages. Some states do
not allow the exclusion of incidental and consequential damages, so the above exclusion may not apply
to you.
ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY PERIOD. Some states do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you.
This Exclusive Limited Warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
GOVIDEO WARRANTY ADMINISTRATOR
7835 East McClain Drive • Scottsdale, Arizona 85260-1732
1-800-736-7679
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|