INSTRUCTION MANUAL
55
Lin
Trim
• Melbourne •
• Taipei • New York • Verona • London • Paris
050524 ED5 JJ
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of symbols
Dear Customer
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Double insulated
for additional protection.
Conforms to relevant standards for
electromagnetic compatibility.
Use at a distance of at least
5m from other people.
If cordset is damaged remove it from the
plug immediately and have it replaced by an
authorised service centre.
Do not use in the rain.
Thrown objects and rotating line can
cause severe injury.
Environmental protection
Sharp blade.
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
Specifications
Voltage:
230–240Vac ~ 50Hz
550W
Input power:
-1
No load speed:
Cut diameter (swathe):
Line thickness:
Spool type:
11,000 min
320mm
1.2mm
Automatic Feed
96dB (A)
3.4kg
Sound pressure level:
Tool weight:
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• When operating a power tool outdoors, use an
outdoor extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
Safety instructions
WARNING. Read and understand all instructions. Failure
to follow all instructions listed below may result in electric
shock, fire and/or serious injury. The term “power tool”
in all of the warnings below refers to your mains-operated
(corded) power tool or battery-operated (cordless)
power tool.
Personal safety
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result
in serious personal injury.
• Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
• Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools
with your finger on the switch or plugging in power
tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning
the tool on. A wrench or a key that is left attached
to a rotating part of the power tool may result in
personal injury.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities ensure that these
are connected and properly used. Use of these devices
can reduce dust-related hazards.
Save these instructions
Work area
• Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Power tool use and care
Additional safety rules for line trimmers
• Always wear adequate protective clothing when
operating the machine to avoid injuries to face, eyes,
hands, feet, head or hearing. Use safety glasses or a
face shield, high boots or sturdy shoes, long trousers,
work gloves, a hard hat and hearing protection.
• When starting up and when the machine is in
operation, keep the cutting section away from all parts
of the body, especially the hands and feet.
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Do not start the machine when it is upside down or
when it is not in the operating position.
• Switch the motor off and pull out the plug when the
machine is not being used, left unattended, being
cleaned, being moved from one place to another or
when the spool is being changed or the length of line
manually adjusted.
• If there is an interruption to the power supply or the
extension cable is damaged, switch off the machine
immediately and remove the plug from the power
point.
• Do not move the machine by pulling on the electrical
cable. Always use the handgrip.
• Do not operate the machine near people, especially
children or pets. Turn it off if they get too close.
Maintain a safe distance of at least 5m from other
people when using the machine.
• Keep a balanced and stable stance while using the
machine.
• Ensure that the area being cut is free from strings,
stones and debris.
• Do not cut against hard objects. This could cause injury
to the operator and damage to the machine.
• Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from intended could result in a
hazardous situation.
• Never use the machine without the guard. Never use
the machine if the guard is damaged.
Service
• Have your power tool serviced by a qualified repair
personnel using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning. The guard is vital for your and other people’s
Wear goggles
Wear ear defenders
Wear a breathing mask
safety and for the machine’s operating efficiency.
• Do not try to stop the cutting device (nylon line) with
your hands. Always let it come to a stop by itself.
Warning. After switching off the machine, the cutting
device continues to rotate for a few more seconds.
Unpacking
Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool
until the parts have been replaced or the fault has been
rectified. Failure to do so could result in serious
personal injury.
• Only use the original type of nylon line. Under no
circumstances use metal line instead of nylon.
• Do not use the machine to cut grass which is not on
the ground. For example, do not cut grass which is on
walls or rocks.
• Do not switch on the machine in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids, gasses and
powders.
• Only cut during broad daylight or with adequate
artificial light.
Contents of carton
• Blade guard
• Edging wheel
• Secondary handle
• 4 Screws and washers
• Check that all grass cuttings and dirt have been
removed from the ventilation vents.
• Do not cross roads or gravel paths with the machine
still running.
• When the machine is not in use, store it in a dry place
and out of reach of children.
• After use, disconnect the machine from the power
supply and check for damage. If you have the slightest
doubts, contact an authorised service centre.
• Only use the machine according to the instructions
given in this manual.
• Check regularly that the screws are tight.
• Do not try to repair the machine or access internal
parts. Contact authorised service centres only.
• Do not get distracted and always concentrate on what
you are doing. Use common sense. Never operate the
machine when you are tired, sick or under the influence
of alcohol or other drugs.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Know your product
Before using the line trimmer, familiarise
yourself with all the operating features and
safety requirements.
This line trimmer is to be used for trimming
soft, new growth only. Use the tool and
accessories only for the applications
intended. All other applications are
expressly ruled out.
14
4
3
5
1
1.Extension cord securing hook
2.Handle
3.Trigger switch
4.Lock-off button
5.Secondary handle
6.Telescopic shaft
13
7.Trimming head
8.Guard
6
9.Line cutting blade
10. Automatic feed spool
11. Spool button
12. Edging wheel
13. Telescopic shaft adjustment knob
14. Handle rotating button
15. Handle adjustment pedal
15
7
9
8
11
10
12
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitting the secondary handle
Assembly
Fitting the guard and guide wheel
1.Align the 4 screw holes
in the guard (8) with the
screw holes in the base
of the unit.
1.Hold in the secondary handle
buttons and push the handle
over them.
2.To adjust the secondary
handle press in the secondary
handle buttons and rotate
the handle to the desired
position then release the
buttons to lock it into place.
1
1
Extension cord support
There is a hole in the back of the handle of the line
trimmer which is used as an extension cord retention
device. To avoid detaching the extension cord always
check that it is attached firmly during use.
1.Make a loop in the extension cord and push it through
the square hole in the back of the handle.
2
2.Place the edging wheel
over the 2 screw holes at
the front section of the
guard.
3.Locate the 4 screws and
washers and tighten
them with a screwdriver.
1
2
Note. Always ensure the
cutting line blade guard
(9) is fitted to the cutter
blade whenever carrying out
maintenance on the line
trimmer.
2.Place the end of the loop around the securing hook (1)
and pull back on the cord so it is firmly held in place.
Vertical handle adjustment
Adjusting the telescopic
handle
1.Push the telescopic shaft
adjustment knob (13)
and hold, adjust the
shaft to a comfortable
height. Make sure the
button clicks into position
once the desired height
has been selected.
1
1
The handle can be adjusted
so that it at horizontal with
the ground, this feature helps
you get access to areas such
as under bushes and garden
furniture.
The handle can be lowered by
pressing down on the handle
8
Download from Www.Somanuals.com. All Manuals Search And Download.
adjustment pedal (15) on the base of the line trimmer
with your foot. Then move the handle downwards to the
desired angle.
3.Remove the cover from the
line cutting blade (9).
3
4.During operation to increase
the cutting line simply
switch the line trimmer off
and then on again, this
with restore the line to the
correct length.
Before starting
Before use, check that the tool is in good working
order and that the length of the trimmer line is correct,
as follows:
1. Ensure the switch is in the off position and disconnect
the cable plug from the mains supply.
Note. Only remove the cover
from the cutting line blade
2. Examine the general condition of the tool. Inspect
the guard, switch, cordset and extension cord. Check
for loose screws, misalignment, binding of moving
parts, improper mounting, broken parts and any
other condition that may affect its safe operation. If
abnormal noise or vibration occurs during operation,
turn the line trimmer off immediately and have the
problem corrected.
3. Ensure that you are on a flat surface and have secure
footing.
4. Check that the line touches or goes beyond the edge of
the guard.
when all operational checks have been carried out.
Replace the cover when the line trimmer is not in use.
Switching on and off
1.Connect the extension cord
to power.
2.Press the lock-off button
(4), then press the trigger
switch (3).
3.To switch off, release the
trigger switch.
WARNING. The tool runs for
approximately 5 seconds after it has been switched off.
Let the motor come to a complete standstill before setting
the tool down.
2
Increasing the cutting line
1.Before starting ensure the
cutting line is the correct
1
length. Pull the cutting
line to the edge of the
guard (8).
2.If the line is to short push
down on the automatic
feed spool (10) and at
the same time pull the
line out so that it extends
a few centimeters past the edge of the guard.
Trimming
WARNING. Make sure that the work area is free of rocks,
debris, lines and other foreign objects.
1. Start the trimmer before approaching the grass to
be cut.
2. The automatic line feed mechanism releases 12mm
from each line when the trimmer reaches a certain
speed. If you need the spool to release more than
12mm of line per side, release the trigger until the
speed falls beyond the trigger point then press the
switch again. As the speed picks up a further 12mm
will be released for both lines.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Cut the grass by swinging the trimmer from right to
left and proceed slowly keeping the trimmer inclined
forwards at an angle of about 30°. Light cuts are better
than heavy cuts as they allow the cut grass to fall away
from the spool preventing the grass from clogging the
spool.
4. Start cutting nearest the mains power source and work
away from it to make it easier to avoid the extension
cord.
3.You can now
use the line
trimmer as
an edger. The
wheel is used
to guide the
line trimmer
along the
Trimming
Edgeing
ground.
5. High grass should be cut in layers always beginning
from the top. Do not cut damp or wet grass. Do not
overload your trimmer.
6. Avoid wearing the line out quickly by knocking against
hard objects (stones, walls, fences etc.).
7. Watch out for kickbacks in the event of impact with
hard objects.
8. After finishing the cutting operation, keep the head
close to ground level, release the switch and allow
the motor to come to a complete standstill. Place the
trimmer on the ground, switch off and remove the cable
plug from the mains supply.
Note. Periodically clean out the grass between the spool
and the rim of the guard to prevent the tool
from vibrating.
Changing a line spool
Warning. Ensure the cutting line blade cover is replaced.
Note. Always unplug the trimmer before carrying out
any maintenance or making any adjustments to the line
trimmer.
1.Turn the line trimmer upside
down.
2.Hold the spool holder firmly
with one hand and with the
other hand squeeze the tabs
on either side of the spool
cover and remove the cover.
2
Using as an edger
Note. Always unplug the trimmer before carrying out
any maintenance or making any adjustments to the line
trimmer.
1.Press the handle rotating
button (14) and rotate
3.Remove the empty spool and
clean out the spool cover.
4.Align the cutaway sections in
the spool opposite the eyelets
and thread the two lines of
the or new spool through
4
1
the shaft 180 degrees, so
it is facing so the handle
is facing the opposite
direction.
the two eyelets in the spool
holder and insert the spool.
2.Release the rotating
button (14), ensuring
that the handle clicks
into position.
Download from Www.Somanuals.co1m0. All Manuals Search And Download.
5.Press the auto feed spool
(10) and pull out the
lines until they reach the
outside edge of the guard.
General inspection
Regularly check that all the fixing screws are tight.
They may vibrate loose over time.
5
Storage
6.Replace the spool cover
ensuring that it is fully
inserted.
CAUTION. After changing
the line spool, run the
trimmer under no load for
at least a minute to make sure that the line and the tool
are both operating correctly. Use only the line spool as
recommended by the manufacturer.
1.Store the trimmer away from direct sunlight.
2.Do not store in a nylon bag as this can encourage the
formation of mould.
3.At the end of the season, give the trimmer an overall
cleaning and a thorough check.
4.Do not leave the trimmer resting on the floor for
extended periods as it could cause the shape of the
guard to alter, posing a safety risk. Hang it off the floor
by the top handgrip.
Maintenance and cleaning
1.Store the tool, instruction manual and accessories in
a secure, dry place. In this way you will always have
the information ready to hand.
2.Keep the tool’s air vents unclogged and clean at
all times.
Power cord maintenance
If the supply cord needs replacing, the task must be carried
out by the manufacturer, the manufacturer’s agent, or an
authorised service centre in order to avoid a safety hazard.
3.Remove dust and dirt regularly. Cleaning is best done
with a rag.
4.All bearings and bushes are lubricated for life.
5.If the cordset is damaged or worn, it must be replaced
by the manufacturer, or service agent or a similarly
qualified person in order to avoid a hazard.
6.Never use caustic agents to clean plastic parts.
CAUTION. Do not use cleaning agents to clean the plastic
parts of the tool. A mild detergent on a damp cloth is
recommended. Water must never come into contact with
the tool.
Download from Www.Somanuals.co1m1. All Manuals Search And Download.
Carefully read the entire Instruction Manual
before using this product.
With continuing product development changes may
have occurred which render the product received
slightly different to that shown in this instruction
manual. The manufacturer reserves the right to
Before returning this product for a
Warranty Claim or any other reason
Please Call 1300 880 001 (Australia)
or 0800 445 721 (New Zealand)
change specifications without notice. Note:
Specifications may differ from country to country.
When you make your call, please have
the following information at hand:
• GMC Product Type • GMC Product Code
A GMC Service Engineer will take your call and, in
most cases, will be able to solve your problem over
the phone.
The GMC 777 Helpline operates from 7am to
7pm, 7 days a week (EST). This allows you
to contact GMC directly with any queries and
technical questions you have regarding
our products.
You are welcome to use this phone-in service to
make suggestions or give comments about any
GMC product.
45–55 South Centre Road
Melbourne Airport
Victoria, Australia 3045
Tel: (03) 8346 1100 Fax: (03) 8346 1200
Save this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|