INSTRUCTION MANUAL
HT18V
18V Cordless Hedge
Trimmer
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
HT18V
• Taipei • New York • Verona • London • Paris
020826 HT18V ED3
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of symbols
Dear Customer
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Introduction
Conforms to relevant standards for
electromagnetic compatibility.
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
Use at a distance of at least
5m from other people.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
Caution. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Specifications
Adaptor charger:
Battery pack:
Charge time:
Run time:
230-240V ~ 50 Hz
2 x 18V
3-5 hours
Approximately 30 minutes*
1500SPM
No-load speed:
*Cutting time may vary dependant on the material
being cut.
Safety instructions
To use this tool properly, you must observe the safety
regulations, the assembly instructions and the operating
instructions to be found in this Manual. All persons who
use and service the machine have to be acquainted with
this Manual and must be informed about its potential
hazards. Children and infirm people must not use this
tool. Children should be supervised at all times if they are
in the area in which the tool is being used. It is also
imperative that you observe the accident prevention
regulations in force in your area. The same applies for
general rules of occupational health and safety.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
The manufacturer shall not be liable for any changes
made to the tool nor for any damage resulting from
such changes.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Even when the tool is used as prescribed it is not possible
to eliminate all residual risk factors. The following hazards
may arise in connection with the tool’s construction and
design:
• Contact with the blade.
• Kickback.
• Blade fracture.
• Catapulting of blade pieces.
• Damage to eyes if effective safety glasses or shield are
not worn.
• Damage to ears if effective ear defenders are not worn.
tools or attachments to do the job best handled by a
heavier duty tool. Never use a tool for a purpose other
than that for which it was intended.
7. Dress correctly. Do not wear loose clothing or jewelry.
They can be caught in moving parts. Rubber gloves and
non-slip footwear are recommended when working
outdoors. If you have long hair, wear a protective hair
covering.
8. Use safety accessories. Safety glasses and ear muffs
should always be worn.
9. Do not overreach. Keep your footing secure and
balanced at all times.
• Always remove the battery from the tool before making
any adjustments or maintenance.
WARNING. When using power tools, basic safety
precautions should always be taken to reduce the risk of
fire, electric shock and personal injury. Also, please read
and heed the advice given in the additional important
safety instructions.
10. Look after your tools. Keep tools clean and sharp for
better and safer performance. Follow the instructions
regarding lubrication and accessory changes. Keep tool
handles dry, clean and free from oil and grease.
11. Disable idle tools. Remove the battery from the tool
before servicing and when the tool is not in use.
12. Avoid unintentional starting. Make sure that the
switches are in the OFF position before attaching the
battery.
1. Keep the work area clean and tidy. Cluttered work areas
and benches invite accidents and injury.
2. Consider the environment in which you are working. Do
not use power tools in damp or wet locations. Keep the
work area well lit. Do not expose power tools to rain
and high humidity. Do not use power tools in the
presence of flammable liquids or gases.
3. Keep visitors away from the work area. All visitors and
onlookers, especially children and infirm persons should
be kept well away from where you are working. Do not
let others in the vicinity make contact with the tool.
4. Store tools safely. When not in use, tools should
be stored in a dry, high place or locked up out of
the reach.
5. Do not force the tool. The tool will do the job better
and safer working at the rate for which it was
designed.
13. Stay alert. Watch what you are doing. Use common
sense. Do not operate a power tool when you are
tired.
14. Check for damaged parts. Before using a tool, check
that there are no damaged parts. If a part is slightly
damaged, carefully determine it will operate properly
and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, proper mounting and any other
conditions that may affect the operation of the tool.
A guard or other part that is damaged should be
properly repaired or replaced by an authorised service
facility, unless otherwise indicated in this Instruction
Manual. Defective switches must be replaced by an
authorised service facility. Do not use a tool if the
switch does not turn the tool on and off correctly.
6. Use the correct tool for the job. Do not force small
4
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Guard against electric shock. Prevent body contact
with grounded objects such as water pipes.
16. Use only approved parts. When servicing, use only
identical replacement parts. Use an authorised service
facility to fit replacement parts.
17. Do not let tool run unattended. Always wait until your
power tool has come to a complete stop before
leaving it and remove the battery.
Unpacking
Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool
until the parts have been replaced or the fault has been
rectified. Failure to do so could result in serious
personal injury.
WARNING. The use of an accessory or attachment, other
than those recommended in this Instruction Manual, may
present a risk of personal injury.
The tool must be used only for its prescribed purpose. Any
use other than those mentioned in this Manual will be
considered a case of misuse. The user and not the
manufacturer shall be liable for any damage or injury
resulting from such cases of misuse.
Additional safety rules for hedge trimmers
• Do not use the trimmer in the rain.
• Keep hands and fingers well away from the blade.
• Wear work gloves, eye protection, solid shoes and
trousers when using this hedge trimmer.
• Always grasp both handles when operating the unit.
• Remove the battery when you have finished work,
before cleaning or if you have been interrupted.
• This trimmer has been designed to cut soft, new growth
and should not be used on branches, hard wood or
other forms of cutting.
• Do not attempt to free a jammed blade before first
switching off the machine and removing the battery.
• If you are interrupted when operating the trimmer,
complete the process and switch off before looking up.
• Never allow untrained users or children to use the
trimmer.
Wear goggles, Wear ear muffs.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Know your product
Before using the saw, familiarise yourself with all the
operating features and safety requirements.
This trimmer is to be used for trimming soft, new growth
only. Use the tool and accessories only for the
applications intended. All other applications are expressly
ruled out.
1. Rear handle trigger switch
2. Front handle bar switch
3. Front handle
4. Battery pack
5. Guard
3
2
1
6. Blade
7. Charging unit
8. Adaptor
5
6
4
8
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.
charge it for approximately 8 hours but only until the
battery starts to become warm to hot to touch. Do this
3 times and the battery should come back up to a
good condition.
Charging the battery
The battery pack for this tool has been shipped in a low
charge condition. You should charge the battery pack fully
before use.
7. Unplug the charger when not in use and store it in a
dry, secure place.
8. Avoid charging your battery in temperatures below 4°C
and above 40°C. The ideal charging temperature is 20°C.
9. Always remove the battery pack and store it in a dry,
secure place when the trimmer is not in use.
10. Battery charging should only be carried out indoors.
WARNING. Do not use an extension cord.
WARNING. Charge indoors only.
WARNING. Do not throw used batteries into a fire or
water: it could cause an explosion! Please hand in non-
working or used batteries, or tools with built-in batteries,
to the environmentally safe disposal unit at a municipal
waste-disposal centre, or to your dealer.
1. Connect the charging unit
(7) to the adaptor (8)
and connect the adaptor
to a suitable pin socket.
WARNING. Never leave a battery on charge once it’s
warm.
WARNING. Do not charge the battery for more than 8
hours, as this will damage the battery cells.
2. Insert the battery (4) into
the charger unit (7).
Safety features
1. The fixed blade teeth have extended points with
rounded ends to reduce the chance of injury in case of
accidental contact.
3. The battery charge time is
approx. 3-5 hours, after
which the battery pack
(4) should be removed. A
good indication for a fully
charged battery is the
temperature of the pack,
which becomes fairly
2. The fixed blade is longer than the moving blade to
guard against kickback should you inadvertently make
contact with a wall or fence.
3. The rear handle trigger switch (1) and front handle bar
switch (2) must be operated together to start the
motor. This ensures that both hands are used to control
the trimmer.
warm as the battery
becomes fully charged.
4. After normal use, 3 hours
4. If either of the two switches is released, the tool is
designed to stop rapidly.
of charging time is
required for the battery
Switching on and off
1. To switch on, press both
the trigger switch (1) and
the bar switch (2) at the
same time.
pack to be fully charged. However, 4-5 hours charging
will ensure a longer run time of your tool.
5. Do not charge batteries for “top up”. Batteries should
be placed on charge only when they are discharged.
6. If your battery delivers abnormal performance,
discharge the battery completely (so that the hedge
trimmer slows but does not stop completely) and then
2. To switch off, release
either switch.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE. If you notice some flashing in the ventilation
shots, this is not a cause for alarm. It is normal and does
not affect the operation of the tool.
There is also a slight burning smell. This comes from the
electric brake and is not a cause for alarm either.
WARNING. Do not let the blade come into contact with
fencing wire or any other object that could damage it.
Pruning
Your hedge trimmer is versatile. It can also be used for
trimming back new growth from small shrubs onto the
driveway or into the garden.
Shaping
1. Trim a hedge so that it is
wider at the bottom than
the top.
2. This improves light
penetration and promotes
healthy growth.
Lubrication
WARNING. Switch off and remove the battery before
carrying out any maintenance on the tool.
1. After each use, clean the blades and lightly lubricate
with general purpose oil or spray lubricant.
3. Narrow the hedge
approximately 100 mm for
every metre in height.
General inspection
1. Regularly check that all the fixing screws are tight.
They may vibrate loose over time.
4. A bush can be round or
column shaped.
Maintenance
1. Store the tool, instruction manual and accessories in a
secure, dry place. In this way you will always have all
the information and parts ready to hand.
Cutting
1. Assume a secure position,
using two hands to
hold the trimmer and
switch on.
2. Keep the tool’s air vents unclogged and clean at all
times.
3. Remove dust and dirt regularly. Cleaning is best done
with compressed air or a rag.
2. Trim both sides of the
hedge, starting at the
bottom. This prevents
cuttings falling into the
area yet to be cut.
4. Never use caustic agents to clean plastic parts.
CAUTION. Do not use cleaning agents to clean the plastic
parts of the tool. A mild detergent on a damp cloth is
recommended. Water must never come into contact with
the tool.
3. Pass the blade lightly
through the surface of
the hedge. Do not
attempt to cut too deep.
4. Trim the top of the
hedge.
5. For older hedges that
require cutting back substantially, use pruning shears
to cut the thicker branches and then finish the job with
the hedge trimmer.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Carefully read the entire Instruction Manual
before using this product.
With continuing product development changes may
have occurred which render the product received
slightly different to that shown in this instruction
manual. The manufacturer reserves the right to
Before returning this product for a
Warranty Claim or any other reason
Please Call 1300 880 001 (Australia)
or 0800 445 721 (New Zealand)
change specifications without notice. Note:
Specifications may differ from country to country.
When you make your call, please have
the following information at hand:
• GMC Product Type • GMC Product Code
A GMC Service Engineer will take your call and, in
most cases, will be able to solve your problem over
the phone.
The GMC 777 Helpline operates from 7am to
7pm, 7 days a week (EST). This allows you
to contact GMC directly with any queries and
technical questions you have regarding
our products.
You are welcome to use this phone-in service to
make suggestions or give comments about any
GMC product.
45–55 South Centre Road
Melbourne Airport
Victoria, Australia 3045
Tel: (03) 8346 1100 Fax: (03) 8346 1200
Save this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|